C++ (Cpp) ADC_SQR5_SQ1_N Examples

Example #1

File: main.c Project: Highway-Man/ConVEX-Installer

static const ADCConversionGroup adcgrpcfg = {
  FALSE,
  ADC_GRP1_NUM_CHANNELS,
  adccb,
  NULL,
  /* HW dependent part.*/
  0,                        /* CR1 */
  ADC_CR2_SWSTART,          /* CR2 */
  0,
  ADC_SMPR2_SMP_AN10(ADC_SAMPLE_48) | ADC_SMPR2_SMP_SENSOR(ADC_SAMPLE_192),
  0,
  ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS),
  0,
  0,
  0,
  ADC_SQR5_SQ2_N(ADC_CHANNEL_IN10) | ADC_SQR5_SQ1_N(ADC_CHANNEL_SENSOR)
};

/*
 * PWM configuration structure.
 * Cyclic callback enabled, channels 1 and 2 enabled without callbacks,
 * the active state is a logic one.
 */
static PWMConfig pwmcfg = {
  10000,                                    /* 10kHz PWM clock frequency.   */
  10000,                                    /* PWM period 1S (in ticks).    */
  pwmpcb,
  {
    {PWM_OUTPUT_ACTIVE_HIGH, NULL},
    {PWM_OUTPUT_ACTIVE_HIGH, NULL},
    {PWM_OUTPUT_DISABLED, NULL},

Example #2

File: main.c Project: mandrake/ChibiOS-Tiva

 * Mode:        Linear buffer, 8 samples of 1 channel, SW triggered.
 * Channels:    IN10.
 */
static const ADCConversionGroup adcgrpcfg1 = {
  FALSE,
  ADC_GRP1_NUM_CHANNELS,
  NULL,
  adcerrorcallback,
  0,                        /* CR1 */
  ADC_CR2_SWSTART,          /* CR2 */
  0,                        /* SMPR1 */
  ADC_SMPR2_SMP_AN10(ADC_SAMPLE_4),
  0,                        /* SMPR3 */
  ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS),
  0, 0, 0,                  /* SQR2, SQR3, SQR4 */
  ADC_SQR5_SQ1_N(ADC_CHANNEL_IN10)
};

/*
 * ADC conversion group.
 * Mode:        Continuous, 16 samples of 8 channels, SW triggered.
 * Channels:    IN10, IN11, IN10, IN11, IN10, IN11, Sensor, VRef.
 */
static const ADCConversionGroup adcgrpcfg2 = {
  TRUE,
  ADC_GRP2_NUM_CHANNELS,
  adccallback,
  adcerrorcallback,
  0,                        /* CR1 */
  ADC_CR2_SWSTART,          /* CR2 */
  0,                        /* SMPR1 */