int main(void)
{
//! [init]
/* Init system. */
//! [system_init]
system_init();
//! [system_init]
/* Configure device and enable. */
//! [temp_init]
at30tse_init();
//! [temp_init]
//! [init]
//! [impl]
/* Read thigh and tlow */
//! [read_thigh]
volatile uint16_t thigh = 0;
thigh = at30tse_read_register(AT30TSE_THIGH_REG,
AT30TSE_NON_VOLATILE_REG, AT30TSE_THIGH_REG_SIZE);
//! [read_thigh]
//! [read_tlow]
volatile uint16_t tlow = 0;
tlow = at30tse_read_register(AT30TSE_TLOW_REG,
AT30TSE_NON_VOLATILE_REG, AT30TSE_TLOW_REG_SIZE);
//! [read_tlow]
/* Set 12-bit resolution mode. */
//! [write_conf]
at30tse_write_config_register(
AT30TSE_CONFIG_RES(AT30TSE_CONFIG_RES_12_bit));
//! [write_conf]
//! [read_temp]
while (1) {
temp_res = at30tse_read_temperature();
}
//! [read_temp]
//! [impl]
UNUSED(tlow);
UNUSED(thigh);
}
int main(void)
{
volatile double temper_value;
volatile bool data_check_status1 = true,
data_check_status2 = true;
uint32_t i;
system_clock_config(CLOCK_RESOURCE_XO_26_MHZ, CLOCK_FREQ_26_MHZ);
/* Initialize AT30TS(E)75x */
at30tse_init();
/* First round data check */
for (i = 0; i < NB_BYTE; i++) {
tx_buffer[i] = i;
}
/* Write pages in EEPROM */
for (i = 0; i < NB_PAGE; i++) {
at30tse_eeprom_write(tx_buffer, NB_BYTE, 0, i);
delay(200);
}
/* Read each page in EEPROM and compare them */
for (i = 0; i < NB_PAGE; i++) {
memset(rx_buffer, 0, NB_BYTE);
at30tse_eeprom_read(rx_buffer, NB_BYTE, 0, i);
if (memcmp(tx_buffer, rx_buffer, NB_BYTE)) {
data_check_status1 = false;
break;
}
}
/* Second round data check */
for (i = 0; i < NB_BYTE; i++) {
tx_buffer[i] = NB_BYTE - i;
}
/* Write pages in EEPROM */
for (i = 0; i < NB_PAGE; i++) {
at30tse_eeprom_write(tx_buffer, NB_BYTE, 0, i);
delay(200);
}
/* Read each page in EEPROM and compare them */
for (i = 0; i < NB_PAGE; i++) {
memset(rx_buffer, 0, NB_BYTE);
at30tse_eeprom_read(rx_buffer, NB_BYTE, 0, i);
if (memcmp(tx_buffer, rx_buffer, NB_BYTE)) {
data_check_status2 = false;
break;
}
}
/* Read thigh and tlow */
volatile uint16_t thigh = 0;
thigh = at30tse_read_register(AT30TSE_THIGH_REG,
AT30TSE_NON_VOLATILE_REG, AT30TSE_THIGH_REG_SIZE);
volatile uint16_t tlow = 0;
tlow = at30tse_read_register(AT30TSE_TLOW_REG,
AT30TSE_NON_VOLATILE_REG, AT30TSE_TLOW_REG_SIZE);
/* Set 12-bit resolution mode. */
at30tse_write_config_register(
AT30TSE_CONFIG_RES(AT30TSE_CONFIG_RES_12_bit));
while (1) {
/* Read current temperature. */
temper_value = at30tse_read_temperature();
}
UNUSED(data_check_status1);
UNUSED(data_check_status2);
UNUSED(temper_value);
UNUSED(tlow);
UNUSED(thigh);
}