#include <Adafruit_ST7735.h> // Hardware-specific library
#include <SPI.h>
#include <SD.h>
// standard U of A library settings, assuming Atmel Mega SPI pins
#define SD_CS 5 // Chip select line for SD card
#define TFT_CS 6 // Chip select line for TFT display
#define TFT_DC 7 // Data/command line for TFT
#define TFT_RST 8 // Reset line for TFT (or connect to +5V)
// Pins of the RGB LED
#define redPin 38
#define greenPin 37
#define bluePin 36
Adafruit_ST7735 tft = Adafruit_ST7735(TFT_CS, TFT_DC, TFT_RST);
#include "Place_Ships.h"
#include "Draw_Screen.h"
#include "lcd_image.h"
#include "Images.h"
#include "Shots.h"
#include "Cursor.h"
#include "Write_Message.h"
#include "Victory_Cascade.h"
#include "SoundFX.h"
// An array to hold all the images that we need. This makes it easier
// to use in multiple functions.
lcd_image_t Images[10] = {
{ "Water.lcd", 12, 12 },
// forward function declarations
void initialize_sd_card();
void initialize_screen();
void initialize_joystick();
uint8_t process_joystick(int16_t *dx, int16_t *dy);
void status_msg(char *msg);
void clear_status_msg();
// Interrupt routines for zooming in and out.
void handle_zoom_in();
void handle_zoom_out();
// global state variables
// globally accessible screen
Adafruit_ST7735 tft = Adafruit_ST7735(tft_cs, tft_dc, tft_rst);
// Map number (zoom level) currently selected.
extern uint8_t current_map_num;
// First time flag for loop, set to cause actions for the first time only
uint8_t first_time;
void setup() {
Serial.begin(9600);
Serial.println("Starting...");
delay(500);
Serial.flush(); // There can be nasty leftover bits.
initialize_screen();
//////////////////////////////////////////////////////////////////////////////
// Global variables follow
//////////////////////////////////////////////////////////////////////////////
int menuState;
MiniDuino myMiniDuino;
int sensNum;
//////////////////////////////////////////////////////////////////////////////
// class initializers
//////////////////////////////////////////////////////////////////////////////
Adafruit_ST7735 tft = Adafruit_ST7735(LCD_CS, LCD_DC, LCD_RST);
//////////////////////////////////////////////////////////////////////////////
// setup()
//////////////////////////////////////////////////////////////////////////////
void setup()
{
Serial.begin(9600);
menuState = TESTKEYPAD_MENU;
tft.initR(INITR_REDTAB);
tft.setTextSize(1);
tft.fillScreen(ST7735_BLACK);
#define cs A2
#define dc D0
#define rst 0
#include "Adafruit_ST7735.h"
Adafruit_ST7735 tft = Adafruit_ST7735(cs, dc, rst); // hardware spi
void setup() {
Serial.begin(9600);
tft.initG();
tft.fillScreen(ST7735_BLACK);
}
void loop() {
Serial.println("printing though!");
tft.fillScreen(ST7735_BLACK);
// tft.setCursor(0, 0);
tft.setTextColor(ST7735_WHITE);
tft.setTextWrap(true);
// tft.setTextSize(3);
// tft.setCursor(30, 3);
tft.setFont(HERO_10);
tft.drawRightString("OTTAWA", 3);
#include <EEPROM.h>
#include <Wire.h>
#ifdef hal_raster
ILI9325C_Leo Raster;
RasterDraw16 Draw(&Raster);
#endif
#ifdef hal_tft
// include libraries
#include <Adafruit_GFX.h> // Core graphics library
#include <Adafruit_ST7735.h> // Hardware-specific library
#include <SPI.h>
// instance object
Adafruit_ST7735 lcd = Adafruit_ST7735(10, A0, 4); // (cs, dc, rst);
#endif
#include <unorthodox.h>
#ifdef hal_compass
HMC5883L compass;
#endif
#ifdef hal_beeps
// use the beeps!
DroidBeeps beeps(9);
PROGMEM prog_uint16_t vocal_stream[] = {
0x3B15, 0x264B, 0x385D, 0x3291, 0x2832, 0x1AB8, // I am a droid!
0x139A, 0x3DA4, 0x1915, 0x21EB, 0x2822, 0x36D4, // beep boop 1