nsSVGStopFrame(nsStyleContext* aContext)
: nsSVGStopFrameBase(aContext)
{
AddStateBits(NS_STATE_SVG_NONDISPLAY_CHILD);
}
NS_IMETHODIMP
nsColumnSetFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
// Don't support interruption in columns
nsPresContext::InterruptPreventer noInterrupts(aPresContext);
DO_GLOBAL_REFLOW_COUNT("nsColumnSetFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowState, aDesiredSize, aStatus);
// Initialize OUT parameter
aStatus = NS_FRAME_COMPLETE;
// Our children depend on our height if we have a fixed height.
if (aReflowState.ComputedHeight() != NS_AUTOHEIGHT) {
NS_ASSERTION(aReflowState.ComputedHeight() != NS_INTRINSICSIZE,
"Unexpected mComputedHeight");
AddStateBits(NS_FRAME_CONTAINS_RELATIVE_HEIGHT);
}
else {
RemoveStateBits(NS_FRAME_CONTAINS_RELATIVE_HEIGHT);
}
//------------ Handle Incremental Reflow -----------------
ReflowConfig config = ChooseColumnStrategy(aReflowState);
bool isBalancing = config.mBalanceColCount < PR_INT32_MAX;
// If balancing, then we allow the last column to grow to unbounded
// height during the first reflow. This gives us a way to estimate
// what the average column height should be, because we can measure
// the heights of all the columns and sum them up. But don't do this
// if we have a next in flow because we don't want to suck all its
// content back here and then have to push it out again!
nsIFrame* nextInFlow = GetNextInFlow();
bool unboundedLastColumn = isBalancing && !nextInFlow;
nsCollapsingMargin carriedOutBottomMargin;
ColumnBalanceData colData;
bool feasible = ReflowChildren(aDesiredSize, aReflowState,
aStatus, config, unboundedLastColumn, &carriedOutBottomMargin, colData);
if (isBalancing && !aPresContext->HasPendingInterrupt()) {
nscoord availableContentHeight = GetAvailableContentHeight(aReflowState);
// Termination of the algorithm below is guaranteed because
// knownFeasibleHeight - knownInfeasibleHeight decreases in every
// iteration.
nscoord knownFeasibleHeight = NS_INTRINSICSIZE;
nscoord knownInfeasibleHeight = 0;
// We set this flag when we detect that we may contain a frame
// that can break anywhere (thus foiling the linear decrease-by-one
// search)
bool maybeContinuousBreakingDetected = false;
while (!aPresContext->HasPendingInterrupt()) {
nscoord lastKnownFeasibleHeight = knownFeasibleHeight;
// Record what we learned from the last reflow
if (feasible) {
// maxHeight is feasible. Also, mLastBalanceHeight is feasible.
knownFeasibleHeight = NS_MIN(knownFeasibleHeight, colData.mMaxHeight);
knownFeasibleHeight = NS_MIN(knownFeasibleHeight, mLastBalanceHeight);
// Furthermore, no height less than the height of the last
// column can ever be feasible. (We might be able to reduce the
// height of a non-last column by moving content to a later column,
// but we can't do that with the last column.)
if (mFrames.GetLength() == config.mBalanceColCount) {
knownInfeasibleHeight = NS_MAX(knownInfeasibleHeight,
colData.mLastHeight - 1);
}
} else {
knownInfeasibleHeight = NS_MAX(knownInfeasibleHeight, mLastBalanceHeight);
// If a column didn't fit in its available height, then its current
// height must be the minimum height for unbreakable content in
// the column, and therefore no smaller height can be feasible.
knownInfeasibleHeight = NS_MAX(knownInfeasibleHeight,
colData.mMaxOverflowingHeight - 1);
if (unboundedLastColumn) {
// The last column is unbounded, so all content got reflowed, so the
// mColMaxHeight is feasible.
knownFeasibleHeight = NS_MIN(knownFeasibleHeight,
colData.mMaxHeight);
}
}
#ifdef DEBUG_roc
printf("*** nsColumnSetFrame::Reflow balancing knownInfeasible=%d knownFeasible=%d\n",
knownInfeasibleHeight, knownFeasibleHeight);
#endif
if (knownInfeasibleHeight >= knownFeasibleHeight - 1) {
// knownFeasibleHeight is where we want to be
break;
}
if (knownInfeasibleHeight >= availableContentHeight) {
break;
}
if (lastKnownFeasibleHeight - knownFeasibleHeight == 1) {
// We decreased the feasible height by one twip only. This could
// indicate that there is a continuously breakable child frame
// that we are crawling through.
maybeContinuousBreakingDetected = PR_TRUE;
}
nscoord nextGuess = (knownFeasibleHeight + knownInfeasibleHeight)/2;
// The constant of 600 twips is arbitrary. It's about two line-heights.
if (knownFeasibleHeight - nextGuess < 600 &&
!maybeContinuousBreakingDetected) {
// We're close to our target, so just try shrinking just the
// minimum amount that will cause one of our columns to break
// differently.
nextGuess = knownFeasibleHeight - 1;
} else if (unboundedLastColumn) {
// Make a guess by dividing that into N columns. Add some slop
// to try to make it on the feasible side. The constant of
// 600 twips is arbitrary. It's about two line-heights.
nextGuess = colData.mSumHeight/config.mBalanceColCount + 600;
// Sanitize it
nextGuess = NS_MIN(NS_MAX(nextGuess, knownInfeasibleHeight + 1),
knownFeasibleHeight - 1);
} else if (knownFeasibleHeight == NS_INTRINSICSIZE) {
// This can happen when we had a next-in-flow so we didn't
// want to do an unbounded height measuring step. Let's just increase
// from the infeasible height by some reasonable amount.
nextGuess = knownInfeasibleHeight*2 + 600;
}
// Don't bother guessing more than our height constraint.
nextGuess = NS_MIN(availableContentHeight, nextGuess);
#ifdef DEBUG_roc
printf("*** nsColumnSetFrame::Reflow balancing choosing next guess=%d\n", nextGuess);
#endif
config.mColMaxHeight = nextGuess;
unboundedLastColumn = PR_FALSE;
AddStateBits(NS_FRAME_IS_DIRTY);
feasible = ReflowChildren(aDesiredSize, aReflowState,
aStatus, config, PR_FALSE,
&carriedOutBottomMargin, colData);
}
if (!feasible && !aPresContext->HasPendingInterrupt()) {
// We may need to reflow one more time at the feasible height to
// get a valid layout.
bool skip = false;
if (knownInfeasibleHeight >= availableContentHeight) {
config.mColMaxHeight = availableContentHeight;
if (mLastBalanceHeight == availableContentHeight) {
skip = PR_TRUE;
}
} else {
config.mColMaxHeight = knownFeasibleHeight;
}
if (!skip) {
// If our height is unconstrained, make sure that the last column is
// allowed to have arbitrary height here, even though we were balancing.
// Otherwise we'd have to split, and it's not clear what we'd do with
// that.
AddStateBits(NS_FRAME_IS_DIRTY);
ReflowChildren(aDesiredSize, aReflowState, aStatus, config,
availableContentHeight == NS_UNCONSTRAINEDSIZE,
&carriedOutBottomMargin, colData);
}
}
}
if (aPresContext->HasPendingInterrupt() &&
aReflowState.availableHeight == NS_UNCONSTRAINEDSIZE) {
// In this situation, we might be lying about our reflow status, because
// our last kid (the one that got interrupted) was incomplete. Fix that.
aStatus = NS_FRAME_COMPLETE;
}
CheckInvalidateSizeChange(aDesiredSize);
FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aReflowState, aStatus);
aDesiredSize.mCarriedOutBottomMargin = carriedOutBottomMargin;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowState, aDesiredSize);
NS_ASSERTION(NS_FRAME_IS_FULLY_COMPLETE(aStatus) ||
aReflowState.availableHeight != NS_UNCONSTRAINEDSIZE,
"Column set should be complete if the available height is unconstrained");
return NS_OK;
}
explicit SVGFELeafFrame(nsStyleContext* aContext)
: nsFrame(aContext)
{
AddStateBits(NS_FRAME_SVG_LAYOUT | NS_FRAME_IS_NONDISPLAY);
}
explicit nsSVGStopFrame(nsStyleContext* aContext)
: nsSVGStopFrameBase(aContext)
{
AddStateBits(NS_FRAME_IS_NONDISPLAY);
}
explicit SVGFEContainerFrame(nsStyleContext* aContext)
: nsContainerFrame(aContext, mozilla::LayoutFrameType::SVGFEContainer)
{
AddStateBits(NS_FRAME_SVG_LAYOUT | NS_FRAME_IS_NONDISPLAY);
}
nsFileControlFrame::nsFileControlFrame(nsStyleContext* aContext):
nsBlockFrame(aContext)
{
AddStateBits(NS_BLOCK_FLOAT_MGR);
}
SVGFEContainerFrame(nsStyleContext* aContext)
: SVGFEContainerFrameBase(aContext)
{
AddStateBits(NS_FRAME_SVG_LAYOUT | NS_STATE_SVG_NONDISPLAY_CHILD);
}
NS_IMETHODIMP
CVE_2013_1732_firefox12_0_nsBlockFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aMetrics,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
DO_GLOBAL_REFLOW_COUNT("nsBlockFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowState, aMetrics, aStatus);
#ifdef DEBUG
if (gNoisyReflow) {
IndentBy(stdout, gNoiseIndent);
ListTag(stdout);
printf(": begin reflow availSize=%d,%d computedSize=%d,%d\n",
aReflowState.availableWidth, aReflowState.availableHeight,
aReflowState.ComputedWidth(), aReflowState.ComputedHeight());
}
AutoNoisyIndenter indent(gNoisy);
PRTime start = LL_ZERO; // Initialize these variablies to silence the compiler.
PRInt32 ctc = 0; // We only use these if they are set (gLameReflowMetrics).
if (gLameReflowMetrics) {
start = PR_Now();
ctc = nsLineBox::GetCtorCount();
}
#endif
const nsHTMLReflowState *reflowState = &aReflowState;
nsAutoPtr<nsHTMLReflowState> mutableReflowState;
// If we have non-auto height, we're clipping our kids and we fit,
// make sure our kids fit too.
if (aReflowState.availableHeight != NS_UNCONSTRAINEDSIZE &&
aReflowState.ComputedHeight() != NS_AUTOHEIGHT &&
ApplyOverflowClipping(this, aReflowState.mStyleDisplay)) {
nsMargin heightExtras = aReflowState.mComputedBorderPadding;
if (GetSkipSides() & NS_SIDE_TOP) {
heightExtras.top = 0;
} else {
// Bottom margin never causes us to create continuations, so we
// don't need to worry about whether it fits in its entirety.
heightExtras.top += aReflowState.mComputedMargin.top;
}
if (GetEffectiveComputedHeight(aReflowState) + heightExtras.TopBottom() <=
aReflowState.availableHeight) {
mutableReflowState = new nsHTMLReflowState(aReflowState);
mutableReflowState->availableHeight = NS_UNCONSTRAINEDSIZE;
reflowState = mutableReflowState;
}
}
// See comment below about oldSize. Use *only* for the
// abs-pos-containing-block-size-change optimization!
nsSize oldSize = GetSize();
// Should we create a float manager?
nsAutoFloatManager autoFloatManager(const_cast<nsHTMLReflowState&>(*reflowState));
// XXXldb If we start storing the float manager in the frame rather
// than keeping it around only during reflow then we should create it
// only when there are actually floats to manage. Otherwise things
// like tables will gain significant bloat.
bool needFloatManager = nsBlockFrame::BlockNeedsFloatManager(this);
if (needFloatManager)
autoFloatManager.CreateFloatManager(aPresContext);
// OK, some lines may be reflowed. Blow away any saved line cursor
// because we may invalidate the nondecreasing
// overflowArea.VisualOverflow().y/yMost invariant, and we may even
// delete the line with the line cursor.
ClearLineCursor();
if (IsFrameTreeTooDeep(*reflowState, aMetrics, aStatus)) {
return NS_OK;
}
bool marginRoot = BlockIsMarginRoot(this);
nsBlockReflowState state(*reflowState, aPresContext, this, aMetrics,
marginRoot, marginRoot, needFloatManager);
#ifdef IBMBIDI
if (GetStateBits() & NS_BLOCK_NEEDS_BIDI_RESOLUTION)
static_cast<nsBlockFrame*>(GetFirstContinuation())->ResolveBidi();
#endif // IBMBIDI
if (RenumberLists(aPresContext)) {
AddStateBits(NS_FRAME_HAS_DIRTY_CHILDREN);
}
nsresult rv = NS_OK;
// ALWAYS drain overflow. We never want to leave the previnflow's
// overflow lines hanging around; block reflow depends on the
// overflow line lists being cleared out between reflow passes.
DrainOverflowLines();
// Handle paginated overflow (see nsContainerFrame.h)
nsOverflowAreas ocBounds;
nsReflowStatus ocStatus = NS_FRAME_COMPLETE;
if (GetPrevInFlow()) {
ReflowOverflowContainerChildren(aPresContext, *reflowState, ocBounds, 0,
ocStatus);
}
// Now that we're done cleaning up our overflow container lists, we can
// give |state| its nsOverflowContinuationTracker.
nsOverflowContinuationTracker tracker(aPresContext, this, false);
state.mOverflowTracker = &tracker;
// Drain & handle pushed floats
DrainPushedFloats(state);
nsOverflowAreas fcBounds;
nsReflowStatus fcStatus = NS_FRAME_COMPLETE;
rv = ReflowPushedFloats(state, fcBounds, fcStatus);
NS_ENSURE_SUCCESS(rv, rv);
// If we're not dirty (which means we'll mark everything dirty later)
// and our width has changed, mark the lines dirty that we need to
// mark dirty for a resize reflow.
if (reflowState->mFlags.mHResize)
PrepareResizeReflow(state);
mState &= ~NS_FRAME_FIRST_REFLOW;
// Now reflow...
rv = ReflowDirtyLines(state);
NS_ASSERTION(NS_SUCCEEDED(rv), "reflow dirty lines failed");
if (NS_FAILED(rv)) return rv;
NS_MergeReflowStatusInto(&state.mReflowStatus, ocStatus);
NS_MergeReflowStatusInto(&state.mReflowStatus, fcStatus);
// If we end in a BR with clear and affected floats continue,
// we need to continue, too.
if (NS_UNCONSTRAINEDSIZE != reflowState->availableHeight &&
NS_FRAME_IS_COMPLETE(state.mReflowStatus) &&
state.mFloatManager->ClearContinues(FindTrailingClear())) {
NS_FRAME_SET_INCOMPLETE(state.mReflowStatus);
}
if (!NS_FRAME_IS_FULLY_COMPLETE(state.mReflowStatus)) {
if (GetOverflowLines() || GetPushedFloats()) {
state.mReflowStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
}
#ifdef DEBUG_kipp
ListTag(stdout); printf(": block is not fully complete\n");
#endif
}
CheckFloats(state);
// Place the "marker" (bullet) frame if it is placed next to a block
// child.
//
// According to the CSS2 spec, section 12.6.1, the "marker" box
// participates in the height calculation of the list-item box's
// first line box.
//
// There are exactly two places a bullet can be placed: near the
// first or second line. It's only placed on the second line in a
// rare case: an empty first line followed by a second line that
// contains a block (example: <LI>\n<P>... ). This is where
// the second case can happen.
if (mBullet && HaveOutsideBullet() && !mLines.empty() &&
(mLines.front()->IsBlock() ||
(0 == mLines.front()->mBounds.height &&
mLines.front() != mLines.back() &&
mLines.begin().next()->IsBlock()))) {
// Reflow the bullet
nsHTMLReflowMetrics metrics;
// XXX Use the entire line when we fix bug 25888.
nsLayoutUtils::LinePosition position;
bool havePosition = nsLayoutUtils::GetFirstLinePosition(this, &position);
nscoord lineTop = havePosition ? position.mTop
: reflowState->mComputedBorderPadding.top;
ReflowBullet(state, metrics, lineTop);
NS_ASSERTION(!BulletIsEmpty() || metrics.height == 0,
"empty bullet took up space");
if (havePosition && !BulletIsEmpty()) {
// We have some lines to align the bullet with.
// Doing the alignment using the baseline will also cater for
// bullets that are placed next to a child block (bug 92896)
// Tall bullets won't look particularly nice here...
nsRect bbox = mBullet->GetRect();
bbox.y = position.mBaseline - metrics.ascent;
mBullet->SetRect(bbox);
}
// Otherwise just leave the bullet where it is, up against our top padding.
}
// Compute our final size
nscoord bottomEdgeOfChildren;
ComputeFinalSize(*reflowState, state, aMetrics, &bottomEdgeOfChildren);
nsRect areaBounds = nsRect(0, 0, aMetrics.width, aMetrics.height);
ComputeOverflowAreas(areaBounds, reflowState->mStyleDisplay,
bottomEdgeOfChildren, aMetrics.mOverflowAreas);
// Factor overflow container child bounds into the overflow area
aMetrics.mOverflowAreas.UnionWith(ocBounds);
// Factor pushed float child bounds into the overflow area
aMetrics.mOverflowAreas.UnionWith(fcBounds);
// Let the absolutely positioned container reflow any absolutely positioned
// child frames that need to be reflowed, e.g., elements with a percentage
// based width/height
// We want to do this under either of two conditions:
// 1. If we didn't do the incremental reflow above.
// 2. If our size changed.
// Even though it's the padding edge that's the containing block, we
// can use our rect (the border edge) since if the border style
// changed, the reflow would have been targeted at us so we'd satisfy
// condition 1.
// XXX checking oldSize is bogus, there are various reasons we might have
// reflowed but our size might not have been changed to what we
// asked for (e.g., we ended up being pushed to a new page)
// When WillReflowAgainForClearance is true, we will reflow again without
// resetting the size. Because of this, we must not reflow our abs-pos children
// in that situation --- what we think is our "new size"
// will not be our real new size. This also happens to be more efficient.
if (HasAbsolutelyPositionedChildren()) {
nsAbsoluteContainingBlock* absoluteContainer = GetAbsoluteContainingBlock();
bool haveInterrupt = aPresContext->HasPendingInterrupt();
if (reflowState->WillReflowAgainForClearance() ||
haveInterrupt) {
// Make sure that when we reflow again we'll actually reflow all the abs
// pos frames that might conceivably depend on our size (or all of them,
// if we're dirty right now and interrupted; in that case we also need
// to mark them all with NS_FRAME_IS_DIRTY). Sadly, we can't do much
// better than that, because we don't really know what our size will be,
// and it might in fact not change on the followup reflow!
if (haveInterrupt && (GetStateBits() & NS_FRAME_IS_DIRTY)) {
absoluteContainer->MarkAllFramesDirty();
} else {
absoluteContainer->MarkSizeDependentFramesDirty();
}
} else {
nsSize containingBlockSize =
CalculateContainingBlockSizeForAbsolutes(*reflowState,
nsSize(aMetrics.width,
aMetrics.height));
// Mark frames that depend on changes we just made to this frame as dirty:
// Now we can assume that the padding edge hasn't moved.
// We need to reflow the absolutes if one of them depends on
// its placeholder position, or the containing block size in a
// direction in which the containing block size might have
// changed.
bool cbWidthChanged = aMetrics.width != oldSize.width;
bool isRoot = !GetContent()->GetParent();
// If isRoot and we have auto height, then we are the initial
// containing block and the containing block height is the
// viewport height, which can't change during incremental
// reflow.
bool cbHeightChanged =
!(isRoot && NS_UNCONSTRAINEDSIZE == reflowState->ComputedHeight()) &&
aMetrics.height != oldSize.height;
absoluteContainer->Reflow(this, aPresContext, *reflowState,
state.mReflowStatus,
containingBlockSize.width,
containingBlockSize.height, true,
cbWidthChanged, cbHeightChanged,
&aMetrics.mOverflowAreas);
//XXXfr Why isn't this rv (and others in this file) checked/returned?
}
}
// Determine if we need to repaint our border, background or outline
CheckInvalidateSizeChange(aMetrics);
FinishAndStoreOverflow(&aMetrics);
// Clear the float manager pointer in the block reflow state so we
// don't waste time translating the coordinate system back on a dead
// float manager.
if (needFloatManager)
state.mFloatManager = nsnull;
aStatus = state.mReflowStatus;
#ifdef DEBUG
// Between when we drain pushed floats and when we complete reflow,
// we're allowed to have multiple continuations of the same float on
// our floats list, since a first-in-flow might get pushed to a later
// continuation of its containing block. But it's not permitted
// outside that time.
nsLayoutUtils::AssertNoDuplicateContinuations(this, mFloats);
if (gNoisyReflow) {
IndentBy(stdout, gNoiseIndent);
ListTag(stdout);
printf(": status=%x (%scomplete) metrics=%d,%d carriedMargin=%d",
aStatus, NS_FRAME_IS_COMPLETE(aStatus) ? "" : "not ",
aMetrics.width, aMetrics.height,
aMetrics.mCarriedOutBottomMargin.get());
if (HasOverflowAreas()) {
printf(" overflow-vis={%d,%d,%d,%d}",
aMetrics.VisualOverflow().x,
aMetrics.VisualOverflow().y,
aMetrics.VisualOverflow().width,
aMetrics.VisualOverflow().height);
printf(" overflow-scr={%d,%d,%d,%d}",
aMetrics.ScrollableOverflow().x,
aMetrics.ScrollableOverflow().y,
aMetrics.ScrollableOverflow().width,
aMetrics.ScrollableOverflow().height);
}
printf("\n");
}
if (gLameReflowMetrics) {
PRTime end = PR_Now();
PRInt32 ectc = nsLineBox::GetCtorCount();
PRInt32 numLines = mLines.size();
if (!numLines) numLines = 1;
PRTime delta, perLineDelta, lines;
LL_I2L(lines, numLines);
LL_SUB(delta, end, start);
LL_DIV(perLineDelta, delta, lines);
ListTag(stdout);
char buf[400];
PR_snprintf(buf, sizeof(buf),
": %lld elapsed (%lld per line) (%d lines; %d new lines)",
delta, perLineDelta, numLines, ectc - ctc);
printf("%s\n", buf);
}
#endif
NS_FRAME_SET_TRUNCATION(aStatus, (*reflowState), aMetrics);
return rv;
}
void
nsSVGPathGeometryFrame::NotifyRedrawSuspended()
{
AddStateBits(NS_STATE_SVG_REDRAW_SUSPENDED);
}
explicit nsSVGStopFrame(nsStyleContext* aContext)
: nsFrame(aContext, LayoutFrameType::SVGStop)
{
AddStateBits(NS_FRAME_IS_NONDISPLAY);
}
nsSVGForeignObjectFrame::nsSVGForeignObjectFrame(nsStyleContext* aContext)
: nsSVGForeignObjectFrameBase(aContext),
mInReflow(false)
{
AddStateBits(NS_FRAME_REFLOW_ROOT | NS_FRAME_MAY_BE_TRANSFORMED);
}
void
nsMenuFrame::BuildAcceleratorText(PRBool aNotify)
{
nsAutoString accelText;
if ((GetStateBits() & NS_STATE_ACCELTEXT_IS_DERIVED) == 0) {
mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::acceltext, accelText);
if (!accelText.IsEmpty())
return;
}
// accelText is definitely empty here.
// Now we're going to compute the accelerator text, so remember that we did.
AddStateBits(NS_STATE_ACCELTEXT_IS_DERIVED);
// If anything below fails, just leave the accelerator text blank.
nsWeakFrame weakFrame(this);
mContent->UnsetAttr(kNameSpaceID_None, nsGkAtoms::acceltext, aNotify);
ENSURE_TRUE(weakFrame.IsAlive());
// See if we have a key node and use that instead.
nsAutoString keyValue;
mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::key, keyValue);
if (keyValue.IsEmpty())
return;
// Turn the document into a DOM document so we can use getElementById
nsIDocument *document = mContent->GetDocument();
if (!document)
return;
nsIContent *keyElement = document->GetElementById(keyValue);
if (!keyElement) {
#ifdef DEBUG
nsAutoString label;
mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::label, label);
nsAutoString msg = NS_LITERAL_STRING("Key '") +
keyValue +
NS_LITERAL_STRING("' of menu item '") +
label +
NS_LITERAL_STRING("' could not be found");
NS_WARNING(NS_ConvertUTF16toUTF8(msg).get());
#endif
return;
}
// get the string to display as accelerator text
// check the key element's attributes in this order:
// |keytext|, |key|, |keycode|
nsAutoString accelString;
keyElement->GetAttr(kNameSpaceID_None, nsGkAtoms::keytext, accelString);
if (accelString.IsEmpty()) {
keyElement->GetAttr(kNameSpaceID_None, nsGkAtoms::key, accelString);
if (!accelString.IsEmpty()) {
ToUpperCase(accelString);
} else {
nsAutoString keyCode;
keyElement->GetAttr(kNameSpaceID_None, nsGkAtoms::keycode, keyCode);
ToUpperCase(keyCode);
nsresult rv;
nsCOMPtr<nsIStringBundleService> bundleService =
mozilla::services::GetStringBundleService();
if (bundleService) {
nsCOMPtr<nsIStringBundle> bundle;
rv = bundleService->CreateBundle("chrome://global/locale/keys.properties",
getter_AddRefs(bundle));
if (NS_SUCCEEDED(rv) && bundle) {
nsXPIDLString keyName;
rv = bundle->GetStringFromName(keyCode.get(), getter_Copies(keyName));
if (keyName)
accelString = keyName;
}
}
// nothing usable found, bail
if (accelString.IsEmpty())
return;
}
}
static PRInt32 accelKey = 0;
if (!accelKey)
{
// Compiled-in defaults, in case we can't get LookAndFeel --
// command for mac, control for all other platforms.
#ifdef XP_MACOSX
accelKey = nsIDOMKeyEvent::DOM_VK_META;
#else
accelKey = nsIDOMKeyEvent::DOM_VK_CONTROL;
#endif
// Get the accelerator key value from prefs, overriding the default:
accelKey = nsContentUtils::GetIntPref("ui.key.accelKey", accelKey);
}
nsAutoString modifiers;
keyElement->GetAttr(kNameSpaceID_None, nsGkAtoms::modifiers, modifiers);
char* str = ToNewCString(modifiers);
char* newStr;
char* token = nsCRT::strtok(str, ", \t", &newStr);
while (token) {
if (PL_strcmp(token, "shift") == 0)
accelText += *gShiftText;
else if (PL_strcmp(token, "alt") == 0)
accelText += *gAltText;
else if (PL_strcmp(token, "meta") == 0)
accelText += *gMetaText;
else if (PL_strcmp(token, "control") == 0)
accelText += *gControlText;
else if (PL_strcmp(token, "accel") == 0) {
switch (accelKey)
{
case nsIDOMKeyEvent::DOM_VK_META:
accelText += *gMetaText;
break;
case nsIDOMKeyEvent::DOM_VK_ALT:
accelText += *gAltText;
break;
case nsIDOMKeyEvent::DOM_VK_CONTROL:
default:
accelText += *gControlText;
break;
}
}
accelText += *gModifierSeparator;
token = nsCRT::strtok(newStr, ", \t", &newStr);
}
nsMemory::Free(str);
accelText += accelString;
mIgnoreAccelTextChange = PR_TRUE;
mContent->SetAttr(kNameSpaceID_None, nsGkAtoms::acceltext, accelText, aNotify);
ENSURE_TRUE(weakFrame.IsAlive());
mIgnoreAccelTextChange = PR_FALSE;
}
