/**
Retrieves the current CPU interrupt state.
Retrieves the current CPU interrupt state. Returns TRUE is interrupts are
currently enabled. Otherwise returns FALSE.
@retval TRUE CPU interrupts are enabled.
@retval FALSE CPU interrupts are disabled.
**/
BOOLEAN
EFIAPI
GlueGetInterruptState (
VOID
)
{
IA32_EFLAGS32 EFlags;
EFlags.UintN = AsmReadEflags ();
return (BOOLEAN)(EFlags.Bits.IF == 1);
}
/**
Calling this function causes the system to enter a power state for capsule
update.
Reset update should not return, if it returns, it means the system does
not support capsule update.
**/
VOID
EFIAPI
EnterS3WithImmediateWake (
VOID
)
{
UINT8 Data8;
UINT16 Data16;
UINT32 Data32;
UINTN Eflags;
UINTN RegCr0;
EFI_TIME EfiTime;
UINT32 SmiEnSave;
Eflags = AsmReadEflags ();
if ( (Eflags & 0x200) ) {
DisableInterrupts ();
}
//
// Write all cache data to memory because processor will lost power
//
AsmWbinvd();
RegCr0 = AsmReadCr0();
AsmWriteCr0 (RegCr0 | 0x060000000);
SmiEnSave = QNCPortRead (QUARK_NC_HOST_BRIDGE_SB_PORT_ID, QNC_MSG_FSBIC_REG_HMISC);
QNCPortWrite (QUARK_NC_HOST_BRIDGE_SB_PORT_ID, QNC_MSG_FSBIC_REG_HMISC, (SmiEnSave & ~SMI_EN));
//
// Pogram RTC alarm for immediate WAKE
//
//
// Disable SMI sources
//
IoWrite16 (PcdGet16 (PcdGpe0blkIoBaseAddress) + R_QNC_GPE0BLK_SMIE, 0);
//
// Disable RTC alarm interrupt
//
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_REGISTER_B);
Data8 = IoRead8 (PCAT_RTC_DATA_REGISTER);
IoWrite8 (PCAT_RTC_DATA_REGISTER, (Data8 & ~BIT5));
//
// Clear RTC alarm if already set
//
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_REGISTER_C);
Data8 = IoRead8 (PCAT_RTC_DATA_REGISTER); // Read clears alarm status
//
// Disable all WAKE events
//
IoWrite16 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1E, B_QNC_PM1BLK_PM1E_PWAKED);
//
// Clear all WAKE status bits
//
IoWrite16 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1S, B_QNC_PM1BLK_PM1S_ALL);
//
// Avoid RTC rollover
//
do {
WaitForRTCUpdate();
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_SECONDS);
EfiTime.Second = IoRead8 (PCAT_RTC_DATA_REGISTER);
} while (EfiTime.Second > PLATFORM_RTC_ROLLOVER_LIMIT);
//
// Read RTC time
//
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_HOURS);
EfiTime.Hour = IoRead8 (PCAT_RTC_DATA_REGISTER);
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_MINUTES);
EfiTime.Minute = IoRead8 (PCAT_RTC_DATA_REGISTER);
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_SECONDS);
EfiTime.Second = IoRead8 (PCAT_RTC_DATA_REGISTER);
//
// Set RTC alarm
//
//
// Add PLATFORM_WAKE_SECONDS_BUFFER to current EfiTime.Second
// The maths is to allow for the fact we are adding to a BCD number and require the answer to be BCD (EfiTime.Second)
//
if ((BCD_BASE - (EfiTime.Second & 0x0F)) <= PLATFORM_WAKE_SECONDS_BUFFER) {
Data8 = (((EfiTime.Second & 0xF0) + 0x10) + (PLATFORM_WAKE_SECONDS_BUFFER - (BCD_BASE - (EfiTime.Second & 0x0F))));
} else {
Data8 = EfiTime.Second + PLATFORM_WAKE_SECONDS_BUFFER;
}
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_HOURS_ALARM);
IoWrite8 (PCAT_RTC_DATA_REGISTER, EfiTime.Hour);
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_MINUTES_ALARM);
IoWrite8 (PCAT_RTC_DATA_REGISTER, EfiTime.Minute);
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_SECONDS_ALARM);
IoWrite8 (PCAT_RTC_DATA_REGISTER, Data8);
//
// Enable RTC alarm interrupt
//
IoWrite8 (PCAT_RTC_ADDRESS_REGISTER, RTC_ADDRESS_REGISTER_B);
Data8 = IoRead8 (PCAT_RTC_DATA_REGISTER);
IoWrite8 (PCAT_RTC_DATA_REGISTER, (Data8 | BIT5));
//
// Enable RTC alarm as WAKE event
//
Data16 = IoRead16 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1E);
IoWrite16 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1E, (Data16 | B_QNC_PM1BLK_PM1E_RTC));
//
// Enter S3
//
Data32 = IoRead32 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1C);
Data32 = (UINT32) ((Data32 & 0xffffc3fe) | V_S3 | B_QNC_PM1BLK_PM1C_SCIEN);
IoWrite32 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1C, Data32);
Data32 = Data32 | B_QNC_PM1BLK_PM1C_SLPEN;
IoWrite32 (PcdGet16 (PcdPm1blkIoBaseAddress) + R_QNC_PM1BLK_PM1C, Data32);
//
// Enable Interrupt if it's enabled before
//
if ( (Eflags & 0x200) ) {
EnableInterrupts ();
}
}
