RTMP_BUILD_DRV_OPS_FUNCTION_BODY

#endif /* OS_ABL_FUNC_SUPPORT */
#endif /* LINUX */


int rt28xx_init(
	IN VOID		*pAdSrc,
	IN PSTRING	pDefaultMac, 
	IN PSTRING	pHostName)
{
	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
	UINT					index;
	UCHAR					TmpPhy;
	NDIS_STATUS				Status;

	if (pAd == NULL)
		return FALSE;

#ifdef RT3290
	DBGPRINT(RT_DEBUG_OFF, ("MACVersion=0x%x\n", pAd->MACVersion));
	if (IS_RT3290(pAd))
	{
		UINT32 MacRegValue;
		OSCCTL_STRUC osCtrl = {.word = 0};
		CMB_CTRL_STRUC cmbCtrl = {.word = 0};
		WLAN_FUN_CTRL_STRUC WlanFunCtrl = {.word = 0};
			
		RTMPEnableWlan(pAd, TRUE, TRUE);

		//
		// Too much time for reading efuse(enter/exit L1), and our device will hang up
		// Disable L1
		//
		RTMP_IO_READ32(pAd, WLAN_FUN_CTRL, &WlanFunCtrl.word);
		if (WlanFunCtrl.field.WLAN_EN == TRUE)
		{
			WlanFunCtrl.field.PCIE_APP0_CLK_REQ = TRUE;
			RTMP_IO_WRITE32(pAd, WLAN_FUN_CTRL, WlanFunCtrl.word);
		}
			
		//Enable ROSC_EN first then CAL_REQ
		RTMP_IO_READ32(pAd, OSCCTL, &osCtrl.word);
		osCtrl.field.ROSC_EN = TRUE; //HW force 
		RTMP_IO_WRITE32(pAd, OSCCTL, osCtrl.word);	
		
		osCtrl.field.ROSC_EN = TRUE; //HW force 
		osCtrl.field.CAL_REQ = TRUE;
		osCtrl.field.REF_CYCLE = 0x27;
		RTMP_IO_WRITE32(pAd, OSCCTL, osCtrl.word);

		RTMP_IO_READ32(pAd, CMB_CTRL, &cmbCtrl.word);
		pAd->CmbCtrl.word = cmbCtrl.word;

		// Overwrite default Coex Parameter
		RTMP_IO_READ32(pAd, COEXCFG0, &MacRegValue);
		MacRegValue &= ~(0xFF000000);
		MacRegValue |= 0x5E000000;
		RTMP_IO_WRITE32(pAd, COEXCFG0, MacRegValue);
	}

	if (IS_RT3290LE(pAd))
	{
		PLL_CTRL_STRUC PllCtrl;
		RTMP_IO_READ32(pAd, PLL_CTRL, &PllCtrl.word);
		PllCtrl.field.VCO_FIXED_CURRENT_CONTROL = 0x1;			
		RTMP_IO_WRITE32(pAd, PLL_CTRL, PllCtrl.word);
	}
#endif /* RT3290 */

#ifdef CONFIG_STA_SUPPORT
#ifdef PCIE_PS_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
    	/* If dirver doesn't wake up firmware here,*/
    	/* NICLoadFirmware will hang forever when interface is up again.*/
    	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) &&
        	OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
    	{
        	AUTO_WAKEUP_STRUC AutoWakeupCfg;
			AsicForceWakeup(pAd, TRUE);
        	AutoWakeupCfg.word = 0;
	    	RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
        	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
    	}
	}
#endif /* PCIE_PS_SUPPORT */
#endif /* CONFIG_STA_SUPPORT */

	/* reset Adapter flags*/
	RTMP_CLEAR_FLAGS(pAd);

	/* Init BssTab & ChannelInfo tabbles for auto channel select.*/
#ifdef CONFIG_AP_SUPPORT	
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
/*#ifdef AUTO_CH_SELECT_ENHANCE*/
		AutoChBssTableInit(pAd);
		ChannelInfoInit(pAd);
/*#endif  AUTO_CH_SELECT_ENHANCE */
	}
#endif /* CONFIG_AP_SUPPORT */

#ifdef DOT11_N_SUPPORT
	/* Allocate BA Reordering memory*/
	if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE)		
		goto err1;
#endif /* DOT11_N_SUPPORT */

	/* Make sure MAC gets ready.*/
	index = 0;
	if (WaitForAsicReady(pAd) != TRUE)
		goto err1;

	DBGPRINT(RT_DEBUG_TRACE, ("MAC[Ver:Rev=0x%08x]\n", pAd->MACVersion));
		

	if (MAX_LEN_OF_MAC_TABLE > MAX_AVAILABLE_CLIENT_WCID(pAd))
	{
		DBGPRINT(RT_DEBUG_ERROR, ("MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!\n"));
		goto err1;
	}


	/* Disable DMA*/
	RT28XXDMADisable(pAd);


	/* Load 8051 firmware*/
	Status = NICLoadFirmware(pAd);
	if (Status != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
		goto err1;
	}

	NICLoadRateSwitchingParams(pAd);

	/* Disable interrupts here which is as soon as possible*/
	/* This statement should never be true. We might consider to remove it later*/

#ifdef RESOURCE_PRE_ALLOC
	Status = RTMPInitTxRxRingMemory(pAd);
#else
	Status = RTMPAllocTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */

	if (Status != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status));
		goto err2;
	}

	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);

	/* initialize MLME*/
	
	Status = RtmpMgmtTaskInit(pAd);
	if (Status != NDIS_STATUS_SUCCESS)
		goto err3;

	Status = MlmeInit(pAd);
	if (Status != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
		goto err4;
	}

#ifdef RMTP_RBUS_SUPPORT
#ifdef VIDEO_TURBINE_SUPPORT
	VideoConfigInit(pAd);
#endif /* VIDEO_TURBINE_SUPPORT */
#endif /* RMTP_RBUS_SUPPORT */

	/* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default*/
	
	UserCfgInit(pAd);


	Status = RtmpNetTaskInit(pAd);
	if (Status != NDIS_STATUS_SUCCESS)
		goto err5;

/*	COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);*/
/*	pAd->bForcePrintTX = TRUE;*/

	CfgInitHook(pAd);

#ifdef CONFIG_AP_SUPPORT
	if ((pAd->OpMode == OPMODE_AP)
#ifdef P2P_SUPPORT
		|| TRUE
#endif /* P2P_SUPPORT */
		)
		APInitialize(pAd);
#endif /* CONFIG_AP_SUPPORT */	

#ifdef BLOCK_NET_IF
	initblockQueueTab(pAd);
#endif /* BLOCK_NET_IF */

	Status = MeasureReqTabInit(pAd);
	if (Status != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status));
		goto err6;	
	}
	Status = TpcReqTabInit(pAd);
	if (Status != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status));
		goto err6;	
	}

	
	/* Init the hardware, we need to init asic before read registry, otherwise mac register will be reset*/
	
	Status = NICInitializeAdapter(pAd, TRUE);
	if (Status != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status));
		if (Status != NDIS_STATUS_SUCCESS)
		goto err6;
	}	

#ifdef CONFIG_AP_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
	}
#endif /* CONFIG_AP_SUPPORT */

	/* Read parameters from Config File */
	/* unknown, it will be updated in NICReadEEPROMParameters */
	pAd->RfIcType = RFIC_UNKNOWN;
	Status = RTMPReadParametersHook(pAd);

#ifdef CONFIG_STA_SUPPORT
#ifdef CREDENTIAL_STORE
	RecoverConnectInfo(pAd);
#endif /* CREDENTIAL_STORE */
#endif /* CONFIG_STA_SUPPORT */

	DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
	if (Status != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status));
		goto err6;
	}

#ifdef RTMP_MAC_USB
	pAd->CommonCfg.bMultipleIRP = FALSE;

	if (pAd->CommonCfg.bMultipleIRP)
		pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE;
	else
		pAd->CommonCfg.NumOfBulkInIRP = 1;
#endif /* RTMP_MAC_USB */

#ifdef DOT11_N_SUPPORT
   	/*Init Ba Capability parameters.*/
/*	RT28XX_BA_INIT(pAd);*/
	pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
	pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
	pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
	pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
	/* UPdata to HT IE*/
	pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
	pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
	pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
#endif /* DOT11_N_SUPPORT */

	/* after reading Registry, we now know if in AP mode or STA mode*/

	/* Load 8051 firmware; crash when FW image not existent*/
	/* Status = NICLoadFirmware(pAd);*/
	/* if (Status != NDIS_STATUS_SUCCESS)*/
	/*    break;*/

	DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));

	/* We should read EEPROM for all cases.  rt2860b*/
	NICReadEEPROMParameters(pAd, (PSTRING)pDefaultMac);	
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */

	DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));

#ifdef LED_CONTROL_SUPPORT
	/* Send LED Setting to MCU */
	RTMPInitLEDMode(pAd);	
#endif /* LED_CONTROL_SUPPORT */

	NICInitAsicFromEEPROM(pAd); /* rt2860b */

#ifdef RALINK_ATE
	if (ATEInit(pAd) != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("%s(): ATE initialization failed !\n", __FUNCTION__));
		goto err6;
	}
#endif /* RALINK_ATE */

#ifdef RTMP_FREQ_CALIBRATION_SUPPORT
#ifdef CONFIG_STA_SUPPORT
	/* Initialize the frequency calibration*/
	if (pAd->chipCap.FreqCalibrationSupport)
		FrequencyCalibration(pAd);	
#endif /* CONFIG_STA_SUPPORT */
#endif /* RTMP_FREQ_CALIBRATION_SUPPORT */

#ifdef RTMP_INTERNAL_TX_ALC
	/* Initialize the desired TSSI table*/
	RTMP_CHIP_ASIC_TSSI_TABLE_INIT(pAd);
#endif /* RTMP_INTERNAL_TX_ALC */

#ifdef RTMP_TEMPERATURE_COMPENSATION
	/* Temperature compensation, initialize the lookup table */
	DBGPRINT(RT_DEBUG_OFF, ("bAutoTxAgcG = %d\n", pAd->bAutoTxAgcG));

	if (pAd->chipCap.bTempCompTxALC && pAd->bAutoTxAgcG)
		InitLookupTable(pAd);
#endif /* RTMP_TEMPERATURE_COMPENSATION */

#ifdef RTMP_FREQ_CALIBRATION_SUPPORT
#ifdef CONFIG_STA_SUPPORT
	if (pAd->chipCap.FreqCalibrationSupport)
		InitFrequencyCalibration(pAd);
#endif /* CONFIG_STA_SUPPORT */
#endif /* RTMP_FREQ_CALIBRATION_SUPPORT */

	/* Set PHY to appropriate mode*/
	TmpPhy = pAd->CommonCfg.PhyMode;
	pAd->CommonCfg.PhyMode = 0xff;
	RTMPSetPhyMode(pAd, TmpPhy);
#ifdef DOT11_N_SUPPORT
	SetCommonHT(pAd);
#endif /* DOT11_N_SUPPORT */

	/* No valid channels.*/
	if (pAd->ChannelListNum == 0)
	{
		DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n"));
		goto err6;
	}

#ifdef DOT11_N_SUPPORT
	DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
           pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
           pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]));
#endif /* DOT11_N_SUPPORT */


#ifdef CONFIG_AP_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
#ifdef AP_QLOAD_SUPPORT
		/* init QBSS Element */
		QBSS_LoadInit(pAd);
#endif /* AP_QLOAD_SUPPORT */

	}
#endif /* CONFIG_AP_SUPPORT */

/*		APInitialize(pAd);*/

#ifdef IKANOS_VX_1X0
	VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
#endif /* IKANOS_VX_1X0 */

#ifdef RTMP_MAC_USB
	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02, FALSE);
	RTMPusecDelay(10000);
#endif /* RTMP_MAC_USB */

#ifdef RALINK_ATE
#ifdef RT5592
#ifdef RTMP_RF_RW_SUPPORT
	/* both for RT5572 and RT5592 */
	if (IS_RT5592(pAd))
	{
		RT55x2ATEFilterCalibration(pAd);
	}
#endif /* RTMP_RF_RW_SUPPORT */
#endif /* RT5592 */
#endif /* RALINK_ATE */

#ifdef CONFIG_AP_SUPPORT
	
	/* Initialize RF register to default value*/
	
	if (pAd->OpMode == OPMODE_AP)
	{
		AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
		AsicLockChannel(pAd, pAd->CommonCfg.Channel);
	}
#endif /* CONFIG_AP_SUPPORT */

	/*
		Some modules init must be called before APStartUp().
		Or APStartUp() will make up beacon content and call
		other modules API to get some information to fill.
	*/



#ifdef CONFIG_TSO_SUPPORT
	if (RTMP_TEST_MORE_FLAG(pAd, fRTMP_ADAPTER_TSO_SUPPORT))
		RTMPTsoEnable(pAd);
#endif /* CONFIG_TSO_SUPPORT */

	if (pAd && (Status != NDIS_STATUS_SUCCESS))
	{
		
		/* Undo everything if it failed*/
		
		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
		{
/*			NdisMDeregisterInterrupt(&pAd->Interrupt);*/
			RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
		}
/*		RTMPFreeAdapter(pAd);  we will free it in disconnect()*/
	}
	else if (pAd)
	{
		/* Microsoft HCT require driver send a disconnect event after driver initialization.*/
		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
		OPSTATUS_CLEAR_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED);
		RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);

		DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));

#ifdef CONFIG_AP_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
		{
			if (pAd->ApCfg.bAutoChannelAtBootup || (pAd->CommonCfg.Channel == 0))
			{
				UINT8 BBPValue = 0;
				
				/* Enable Interrupt first due to we need to scan channel to receive beacons.*/
				RTMP_IRQ_ENABLE(pAd);
#ifdef RTMP_MAC_USB
				RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
				RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);

				
				/* Support multiple BulkIn IRP,*/
				/* the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.*/
				
				for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++)
				{
					RTUSBBulkReceive(pAd);
					DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" ));
				}
#endif /* RTMP_MAC_USB */
				/* Now Enable RxTx*/
				RTMPEnableRxTx(pAd);
				RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP);

				/* Let BBP register at 20MHz to do scan		*/
				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
				BBPValue &= (~0x18);
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
				DBGPRINT(RT_DEBUG_ERROR, ("SYNC - BBP R4 to 20MHz.l\n"));

				/* Now we can receive the beacon and do the listen beacon*/
				/* use default BW to select channel*/
				pAd->CommonCfg.Channel = AP_AUTO_CH_SEL(pAd, pAd->ApCfg.AutoChannelAlg);
				pAd->ApCfg.bAutoChannelAtBootup = FALSE;
			}

#ifdef DOT11_N_SUPPORT
			/* If phymode > PHY_11ABGN_MIXED and BW=40 check extension channel, after select channel  */
			N_ChannelCheck(pAd);

#ifdef DOT11N_DRAFT3
        		/* 
         			We only do this Overlapping BSS Scan when system up, for the 
				other situation of channel changing, we depends on station's 
				report to adjust ourself.
			*/
			if (pAd->CommonCfg.bForty_Mhz_Intolerant == TRUE)
			{
				DBGPRINT(RT_DEBUG_TRACE, ("Disable 20/40 BSSCoex Channel Scan(BssCoex=%d, 40MHzIntolerant=%d)\n", 
											pAd->CommonCfg.bBssCoexEnable, 
											pAd->CommonCfg.bForty_Mhz_Intolerant));
			}
			else if(pAd->CommonCfg.bBssCoexEnable == TRUE)
			{	
				DBGPRINT(RT_DEBUG_TRACE, ("Enable 20/40 BSSCoex Channel Scan(BssCoex=%d)\n", 
							pAd->CommonCfg.bBssCoexEnable));
				APOverlappingBSSScan(pAd);
			}

			RTMP_11N_D3_TimerInit(pAd);
/*			RTMPInitTimer(pAd, &pAd->CommonCfg.Bss2040CoexistTimer, GET_TIMER_FUNCTION(Bss2040CoexistTimeOut), pAd, FALSE);*/
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */

			APStartUp(pAd);
			DBGPRINT(RT_DEBUG_OFF, ("Main bssid = %02x:%02x:%02x:%02x:%02x:%02x\n", 
									PRINT_MAC(pAd->ApCfg.MBSSID[BSS0].Bssid)));
		}
#endif /* CONFIG_AP_SUPPORT */

#ifdef RTMP_MAC_USB
		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);

		
		/* Support multiple BulkIn IRP,*/
		/* the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.*/
		
		for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++)
		{
			RTUSBBulkReceive(pAd);
			DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" ));
		}
#endif /* RTMP_MAC_USB */
	}/* end of else*/

	/* Set up the Mac address*/
#ifdef CONFIG_AP_SUPPORT
#ifndef P2P_APCLI_SUPPORT
	RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], NULL);
#endif /* P2P_APCLI_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
	RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], (PUCHAR)(pAd->StaCfg.dev_name));
#endif /* CONFIG_STA_SUPPORT */

	/* Various AP function init*/
#ifdef CONFIG_AP_SUPPORT
#ifdef P2P_SUPPORT

#else
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
#endif /* P2P_SUPPORT */
	{
#ifdef MBSS_SUPPORT
		/* the function can not be moved to RT2860_probe() even register_netdev()
		   is changed as register_netdevice().
		   Or in some PC, kernel will panic (Fedora 4) */
/*		RT28xx_MBSS_Init(pAd, pAd->net_dev);  os abl move to rt_main_dev.c*/
#endif /* MBSS_SUPPORT */


#ifdef APCLI_SUPPORT
/*		RT28xx_ApCli_Init(pAd, pAd->net_dev);*/
#endif /* APCLI_SUPPORT */
	}
#endif /* CONFIG_AP_SUPPORT */

#ifdef UAPSD_SUPPORT
        UAPSD_Init(pAd);
#endif /* UAPSD_SUPPORT */

	/* assign function pointers*/
#ifdef MAT_SUPPORT
	/* init function pointers, used in OS_ABL */
	RTMP_MATOpsInit(pAd);
#endif /* MAT_SUPPORT */



#ifdef P2P_SUPPORT
/*		RTMP_P2P_Init(pAd, pAd->net_dev); */
#endif /* P2P_SUPPORT */

#ifdef CONFIG_AP_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
#ifdef MAT_SUPPORT
		MATEngineInit(pAd);
#endif /* MAT_SUPPORT */

#ifdef CLIENT_WDS
	CliWds_ProxyTabInit(pAd);
#endif /* CLIENT_WDS */
	}
#endif /* CONFIG_AP_SUPPORT */

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
#ifdef DOT11Z_TDLS_SUPPORT
		TDLS_Table_Init(pAd);
#endif /* DOT11Z_TDLS_SUPPORT */

#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
		/* send wireless event to wpa_supplicant for infroming interface up.*/
		RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_UP, NULL, NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
#endif /* WPA_SUPPLICANT_SUPPORT */

	}
#endif /* CONFIG_STA_SUPPORT */

	/* auto-fall back settings */
#ifdef RANGE_EXTEND
	RTMP_IO_WRITE32(pAd, HT_FBK_CFG1, 0xedcba980);
#endif // RANGE_EXTEND //
#ifdef DOT11N_SS3_SUPPORT
	if (pAd->CommonCfg.TxStream >= 3)
	{
		RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_0, 0x12111008);
		RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_1, 0x16151413);
	}
#endif /* DOT11N_SS3_SUPPORT */

#ifdef STREAM_MODE_SUPPORT
	RtmpStreamModeInit(pAd);
#endif /* STREAM_MODE_SUPPORT */


#ifdef DOT11_N_SUPPORT
#endif /* DOT11_N_SUPPORT */



#ifdef RT3290
	if (IS_RT3290(pAd))
	{
		WLAN_FUN_CTRL_STRUC     WlanFunCtrl = {.word = 0};
		RTMP_MAC_PWRSV_EN(pAd, TRUE, TRUE);	
		//
		// Too much time for reading efuse(enter/exit L1), and our device will hang up
		// Enable L1
		//
		RTMP_IO_READ32(pAd, WLAN_FUN_CTRL, &WlanFunCtrl.word);
		if (WlanFunCtrl.field.WLAN_EN == TRUE)
		{
			WlanFunCtrl.field.PCIE_APP0_CLK_REQ = FALSE;
			RTMP_IO_WRITE32(pAd, WLAN_FUN_CTRL, WlanFunCtrl.word);
		}
	}
#endif /* RT3290 */

	DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status));

	return TRUE;

/*err7:
	APStop(pAd);*/
err6:

#ifdef IGMP_SNOOP_SUPPORT
	MultiCastFilterTableReset(&pAd->pMulticastFilterTable);
#endif /* IGMP_SNOOP_SUPPORT */

	MeasureReqTabExit(pAd);
	TpcReqTabExit(pAd);
err5:	
	RtmpNetTaskExit(pAd);
	UserCfgExit(pAd);
err4:	
	MlmeHalt(pAd);
	RTMP_TimerListRelease(pAd);
err3:	
	RtmpMgmtTaskExit(pAd);
#ifdef RTMP_TIMER_TASK_SUPPORT
	NdisFreeSpinLock(&pAd->TimerQLock);
#endif /* RTMP_TIMER_TASK_SUPPORT */
err2:
#ifdef RESOURCE_PRE_ALLOC
	RTMPResetTxRxRingMemory(pAd);
#else
	RTMPFreeTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */

err1:

#ifdef CONFIG_AP_SUPPORT
	/* Free BssTab & ChannelInfo tabbles.*/
	AutoChBssTableDestroy(pAd);
	ChannelInfoDestroy(pAd);
#endif /* CONFIG_AP_SUPPORT */

#ifdef RT3290
	if (IS_RT3290(pAd))
		RTMPEnableWlan(pAd, FALSE, FALSE);
#endif /* RT3290 */

#ifdef DOT11_N_SUPPORT
	if(pAd->mpdu_blk_pool.mem)
		os_free_mem(pAd, pAd->mpdu_blk_pool.mem); /* free BA pool*/
#endif /* DOT11_N_SUPPORT */

	/* shall not set priv to NULL here because the priv didn't been free yet.*/
	/*net_dev->priv = 0;*/
#ifdef INF_AMAZON_SE
err0:
#endif /* INF_AMAZON_SE */
#ifdef ST
err0:
#endif /* ST */

	DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n"));
	return FALSE;
}


VOID RTMPDrvOpen(
	IN VOID			*pAdSrc)
{
	PRTMP_ADAPTER	pAd = (PRTMP_ADAPTER)pAdSrc;

#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */

	/* Enable Interrupt*/
	RTMP_IRQ_ENABLE(pAd);

	/* Now Enable RxTx*/
	RTMPEnableRxTx(pAd);
	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP);

	{
	UINT32 reg = 0;
	RTMP_IO_READ32(pAd, 0x1300, &reg);  /* clear garbage interrupts*/
	printk("0x1300 = %08x\n", reg);
	}

	{
/*	u32 reg;*/
/*	UINT8  byte;*/
/*	u16 tmp;*/

/*	RTMP_IO_READ32(pAd, XIFS_TIME_CFG, &reg);*/

/*	tmp = 0x0805;*/
/*	reg  = (reg & 0xffff0000) | tmp;*/
/*	RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg);*/

	}


#ifdef CONFIG_STA_SUPPORT
#ifdef PCIE_PS_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        RTMPInitPCIeLinkCtrlValue(pAd);
#endif /* PCIE_PS_SUPPORT */


#endif /* CONFIG_STA_SUPPORT */

#ifdef CONFIG_AP_SUPPORT
#ifdef BG_FT_SUPPORT
	BG_FTPH_Init();
#endif /* BG_FT_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */


#ifdef CONFIG_STA_SUPPORT
	/*
		To reduce connection time, 
		do auto reconnect here instead of waiting STAMlmePeriodicExec to do auto reconnect.
	*/
	if (pAd->OpMode == OPMODE_STA)
		MlmeAutoReconnectLastSSID(pAd);
#endif /* CONFIG_STA_SUPPORT */


#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */

#ifdef WSC_INCLUDED
#ifdef CONFIG_AP_SUPPORT
	if ((pAd->OpMode == OPMODE_AP)
#ifdef P2P_SUPPORT
		/* P2P will use ApCfg.MBSSID and ApCfg.ApCliTab also. */
		|| TRUE
#endif /* P2P_SUPPORT */
		)
	{
		int index;
		for (index = 0; index < pAd->ApCfg.BssidNum; index++)
		{
#ifdef HOSTAPD_SUPPORT
			if (pAd->ApCfg.MBSSID[index].Hostapd == TRUE)
			{
				DBGPRINT(RT_DEBUG_TRACE, ("WPS is control by hostapd now.\n"));
			}
			else
#endif /*HOSTAPD_SUPPORT*/
			{
				PWSC_CTRL pWscControl;
				UCHAR zeros16[16]= {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
				
				pWscControl = &pAd->ApCfg.MBSSID[index].WscControl;
				DBGPRINT(RT_DEBUG_TRACE, ("Generate UUID for apidx(%d)\n", index));
				if (NdisEqualMemory(&pWscControl->Wsc_Uuid_E[0], zeros16, UUID_LEN_HEX))
					WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], index, FALSE);
				WscInit(pAd, FALSE, index);
			}
		}

#ifdef APCLI_SUPPORT
		for(index = 0; index < MAX_APCLI_NUM; index++)
		{
			PWSC_CTRL pWpsCtrl = &pAd->ApCfg.ApCliTab[index].WscControl;
			
			pWpsCtrl->pAd = pAd;        
			NdisZeroMemory(pWpsCtrl->EntryAddr, MAC_ADDR_LEN);
			pWpsCtrl->WscConfigMethods= 0x018C;
			RTMP_AP_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_WSC_INIT, 0, (VOID *)&pAd->ApCfg.ApCliTab[index], index);
		}
#endif /* APCLI_SUPPORT */
	}
#endif /* CONFIG_AP_SUPPORT */

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		PWSC_CTRL pWscControl = &pAd->StaCfg.WscControl;
		
		WscGenerateUUID(pAd, &pWscControl->Wsc_Uuid_E[0], &pWscControl->Wsc_Uuid_Str[0], 0, FALSE);
		WscInit(pAd, FALSE, BSS0);
#ifdef WSC_V2_SUPPORT
		WscInitRegistrarPair(pAd, &pAd->StaCfg.WscControl, BSS0);
#endif /* WSC_V2_SUPPORT */
	}
#endif /* CONFIG_STA_SUPPORT */

	/* WSC hardware push button function 0811 */
	WSC_HDR_BTN_Init(pAd);
#endif /* WSC_INCLUDED */
}


VOID RTMPDrvClose(
	IN VOID				*pAdSrc,
	IN VOID				*net_dev)
{
	PRTMP_ADAPTER	pAd = (PRTMP_ADAPTER)pAdSrc;
	BOOLEAN 		Cancelled;
	UINT32			i = 0;


	Cancelled = FALSE;

#ifdef CONFIG_STA_SUPPORT
#ifdef CREDENTIAL_STORE
		if (pAd->IndicateMediaState == NdisMediaStateConnected)
		{	
			StoreConnectInfo(pAd);
		}
		else
		{
			RTMP_SEM_LOCK(&pAd->StaCtIf.Lock);
			pAd->StaCtIf.Changeable = FALSE;
			RTMP_SEM_UNLOCK(&pAd->StaCtIf.Lock);
		}
#endif /* CREDENTIAL_STORE */
#endif /* CONFIG_STA_SUPPORT */

#ifdef CONFIG_AP_SUPPORT
#ifdef BG_FT_SUPPORT
	BG_FTPH_Remove();
#endif /* BG_FT_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */


#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
#ifdef PCIE_PS_SUPPORT
		RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE);
#endif /* PCIE_PS_SUPPORT */

		/* If dirver doesn't wake up firmware here,*/
		/* NICLoadFirmware will hang forever when interface is up again.*/
		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
        {      
		    AsicForceWakeup(pAd, TRUE);
        }

#ifdef RTMP_MAC_USB
		RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
#endif /* RTMP_MAC_USB */

	}
#endif /* CONFIG_STA_SUPPORT */

	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);

#ifdef EXT_BUILD_CHANNEL_LIST
	if (pAd->CommonCfg.pChDesp != NULL)
		os_free_mem(NULL, pAd->CommonCfg.pChDesp);
	pAd->CommonCfg.pChDesp = NULL;
	pAd->CommonCfg.DfsType = MAX_RD_REGION;
	pAd->CommonCfg.bCountryFlag = 0;
#endif /* EXT_BUILD_CHANNEL_LIST */




	for (i = 0 ; i < NUM_OF_TX_RING; i++)
	{
		while (pAd->DeQueueRunning[i] == TRUE)
		{
			DBGPRINT(RT_DEBUG_TRACE, ("Waiting for TxQueue[%d] done..........\n", i));
			RTMPusecDelay(1000);
		}
	}
	
#ifdef RTMP_MAC_USB
	RtmpOsUsbEmptyUrbCheck(&pAd->wait, &pAd->BulkInLock, &pAd->PendingRx);

#endif /* RTMP_MAC_USB */

#ifdef CONFIG_AP_SUPPORT

	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
#ifdef RTMP_MAC_USB
		RTMPCancelTimer(&pAd->CommonCfg.BeaconUpdateTimer, &Cancelled);
#endif /* RTMP_MAC_USB */

#ifdef DOT11N_DRAFT3
		if (pAd->CommonCfg.Bss2040CoexistFlag & BSS_2040_COEXIST_TIMER_FIRED)
		{
			RTMPCancelTimer(&pAd->CommonCfg.Bss2040CoexistTimer, &Cancelled);
			pAd->CommonCfg.Bss2040CoexistFlag  = 0;
		}
#endif /* DOT11N_DRAFT3 */

		/* PeriodicTimer already been canceled by MlmeHalt() API.*/
		/*RTMPCancelTimer(&pAd->PeriodicTimer,	&Cancelled);*/
	}
#endif /* CONFIG_AP_SUPPORT */

	/* Stop Mlme state machine*/
	MlmeHalt(pAd);
	
	/* Close net tasklets*/
	RtmpNetTaskExit(pAd);


#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		MacTableReset(pAd);
#ifdef MAT_SUPPORT
		MATEngineExit(pAd);
#endif /* MAT_SUPPORT */
#if defined(WOW_SUPPORT) && defined(RTMP_MAC_USB) && defined(WOW_IFDOWN_SUPPORT)
		if (pAd->WOW_Cfg.bEnable == TRUE)
			RT28xxUsbAsicWOWEnable(pAd);
		else
#endif /* WOW_SUPPORT */
			MlmeRadioOff(pAd);
	}
#endif /* CONFIG_STA_SUPPORT */

#ifdef CONFIG_AP_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
#ifdef MAT_SUPPORT
		MATEngineExit(pAd);
#endif /* MAT_SUPPORT */

#ifdef CLIENT_WDS
		CliWds_ProxyTabDestory(pAd);
#endif /* CLIENT_WDS */
		/* Shutdown Access Point function, release all related resources */
		APShutdown(pAd);

/*#ifdef AUTO_CH_SELECT_ENHANCE*/
		/* Free BssTab & ChannelInfo tabbles.*/
/*		AutoChBssTableDestroy(pAd); */
/*		ChannelInfoDestroy(pAd); */
/*#endif  AUTO_CH_SELECT_ENHANCE */
	}
#endif /* CONFIG_AP_SUPPORT */

	MeasureReqTabExit(pAd);
	TpcReqTabExit(pAd);

#ifdef LED_CONTROL_SUPPORT
	RTMPExitLEDMode(pAd);
#endif // LED_CONTROL_SUPPORT


	/* Close kernel threads*/
	RtmpMgmtTaskExit(pAd);

#ifdef CONFIG_AP_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
		/* must after RtmpMgmtTaskExit(); Or pAd->pChannelInfo will be NULL */
		/* Free BssTab & ChannelInfo tabbles.*/
		AutoChBssTableDestroy(pAd);
		ChannelInfoDestroy(pAd);
	}
#endif /* CONFIG_AP_SUPPORT */


	/* Free IRQ*/
	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
	{
		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
	}

	/* Free Ring or USB buffers*/
#ifdef RESOURCE_PRE_ALLOC
	RTMPResetTxRxRingMemory(pAd);
#else
	/* Free Ring or USB buffers*/
	RTMPFreeTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */

	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);

#ifdef DOT11_N_SUPPORT
	/* Free BA reorder resource*/
	ba_reordering_resource_release(pAd);
#endif /* DOT11_N_SUPPORT */

	UserCfgExit(pAd); /* must after ba_reordering_resource_release */

#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */

	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);

/*+++Modify by woody to solve the bulk fail+++*/
#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
#ifdef RT35xx
		if (IS_RT3572(pAd))
		{
			RT30xxWriteRFRegister(pAd, RF_R08, 0x00);
			AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02, FALSE);
		}
#endif /* RT35xx */
#ifdef DOT11Z_TDLS_SUPPORT
		TDLS_Table_Destory(pAd);
#ifdef TDLS_AUTOLINK_SUPPORT
		TDLS_ClearEntryList(&pAd->StaCfg.TdlsInfo.TdlsDiscovPeerList);
		NdisFreeSpinLock(&pAd->StaCfg.TdlsInfo.TdlsDiscovPeerListSemLock);
		TDLS_ClearEntryList(&pAd->StaCfg.TdlsInfo.TdlsBlackList);
		NdisFreeSpinLock(&pAd->StaCfg.TdlsInfo.TdlsBlackListSemLock);
#endif /* TDLS_AUTOLINK_SUPPORT */
#endif /* DOT11Z_TDLS_SUPPORT */
	}
#endif /* CONFIG_STA_SUPPORT */

	/* clear MAC table */
	/* TODO: do not clear spin lock, such as fLastChangeAccordingMfbLock */
	NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE));

	/* release all timers */
	RTMPusecDelay(2000);
	RTMP_TimerListRelease(pAd);

#ifdef RTMP_TIMER_TASK_SUPPORT
	NdisFreeSpinLock(&pAd->TimerQLock);
#endif /* RTMP_TIMER_TASK_SUPPORT */
}


VOID RTMPInfClose(
	IN VOID				*pAdSrc)
{
	PRTMP_ADAPTER	pAd = (PRTMP_ADAPTER)pAdSrc;


#ifdef CONFIG_AP_SUPPORT
	pAd->ApCfg.MBSSID[MAIN_MBSSID].bBcnSntReq = FALSE;

	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
		/* kick out all STAs behind the bss.*/
		MbssKickOutStas(pAd, MAIN_MBSSID, REASON_DISASSOC_INACTIVE);
	}

#ifdef RT_CFG80211_SUPPORT

#else
	APMakeAllBssBeacon(pAd);
	APUpdateAllBeaconFrame(pAd);
#endif /* RT_CFG80211_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */



#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
#ifdef PROFILE_STORE
		WriteDatThread(pAd);
		RTMPusecDelay(1000);
#endif /* PROFILE_STORE */
#ifdef QOS_DLS_SUPPORT
		/* send DLS-TEAR_DOWN message, */
		if (pAd->CommonCfg.bDLSCapable)
		{
			UCHAR i;

			/* tear down local dls table entry*/
			for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
			{
				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
				{
					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
					pAd->StaCfg.DLSEntry[i].Status	= DLS_NONE;
					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
				}
			}

			/* tear down peer dls table entry*/
			for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
			{
				if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
				{
					RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
					pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
					pAd->StaCfg.DLSEntry[i].Valid	= FALSE;
				}
			}
			RTMP_MLME_HANDLER(pAd);
		}
#endif /* QOS_DLS_SUPPORT */

		if (INFRA_ON(pAd) &&
#if defined(WOW_SUPPORT) && defined(RTMP_MAC_USB) && defined(WOW_IFDOWN_SUPPORT) /* In WOW state, can't issue disassociation reqeust */
			pAd->WOW_Cfg.bEnable == FALSE &&
#endif /* WOW_SUPPORT */
			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
		{
			MLME_DISASSOC_REQ_STRUCT	DisReq;
			MLME_QUEUE_ELEM *MsgElem;/* = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);*/
    
			os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM));
			if (MsgElem)
			{
			COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
			DisReq.Reason =  REASON_DEAUTH_STA_LEAVING;

			MsgElem->Machine = ASSOC_STATE_MACHINE;
			MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
			MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
			NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));

			/* Prevent to connect AP again in STAMlmePeriodicExec*/
			pAd->MlmeAux.AutoReconnectSsidLen= 32;
			NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);

			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
			MlmeDisassocReqAction(pAd, MsgElem);
/*			kfree(MsgElem);*/
			os_free_mem(NULL, MsgElem);
			}
			
			RTMPusecDelay(1000);
		}

#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
		/* send wireless event to wpa_supplicant for infroming interface down.*/
		RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */

		if (pAd->StaCfg.pWpsProbeReqIe)
		{
/*			kfree(pAd->StaCfg.pWpsProbeReqIe);*/
			os_free_mem(NULL, pAd->StaCfg.pWpsProbeReqIe);
			pAd->StaCfg.pWpsProbeReqIe = NULL;
			pAd->StaCfg.WpsProbeReqIeLen = 0;
		}

		if (pAd->StaCfg.pWpaAssocIe)
		{
/*			kfree(pAd->StaCfg.pWpaAssocIe);*/
			os_free_mem(NULL, pAd->StaCfg.pWpaAssocIe);
			pAd->StaCfg.pWpaAssocIe = NULL;
			pAd->StaCfg.WpaAssocIeLen = 0;
		}
#endif /* WPA_SUPPLICANT_SUPPORT */


	}
#endif /* CONFIG_STA_SUPPORT */
}




PNET_DEV RtmpPhyNetDevMainCreate(
	IN VOID				*pAdSrc)
{
	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
	PNET_DEV pDevNew;
	UINT32 MC_RowID = 0, IoctlIF = 0;


	pAd = pAd;

#ifdef MULTIPLE_CARD_SUPPORT
	MC_RowID = pAd->MC_RowID;
#endif /* MULTIPLE_CARD_SUPPORT */
#ifdef HOSTAPD_SUPPORT
	IoctlIF = pAd->IoctlIF;
#endif /* HOSTAPD_SUPPORT */

	pDevNew = RtmpOSNetDevCreate((INT32)MC_RowID, (UINT32 *)&IoctlIF,
					INT_MAIN, 0, sizeof(PRTMP_ADAPTER), INF_MAIN_DEV_NAME);

#ifdef HOSTAPD_SUPPORT
	pAd->IoctlIF = IoctlIF;
#endif /* HOSTAPD_SUPPORT */

	return pDevNew;
}
Example #2
0
/*
========================================================================
Routine Description:
    Close raxx interface.

Arguments:
	*net_dev			the raxx interface pointer

Return Value:
    0					Open OK
	otherwise			Open Fail

Note:
	1. if open fail, kernel will not call the close function.
	2. Free memory for
		(1) Mlme Memory Handler:		MlmeHalt()
		(2) TX & RX:					RTMPFreeTxRxRingMemory()
		(3) BA Reordering: 				ba_reordering_resource_release()
========================================================================
*/
int rt28xx_close(IN PNET_DEV dev)
{
	struct net_device * net_dev = (struct net_device *)dev;
    RTMP_ADAPTER	*pAd = NULL;
	BOOLEAN 		Cancelled;
	UINT32			i = 0;

	GET_PAD_FROM_NET_DEV(pAd, net_dev);	

	DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));

#ifdef CONFIG_AP_SUPPORT
#ifdef BG_FT_SUPPORT
	BG_FTPH_Remove();
#endif // BG_FT_SUPPORT //
#endif // CONFIG_AP_SUPPORT //

	Cancelled = FALSE;
	// Sanity check for pAd
	if (pAd == NULL)
		return 0; // close ok

	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);

#ifdef WMM_ACM_SUPPORT
	/* must call first */
	ACMP_Release(pAd);
#endif // WMM_ACM_SUPPORT //


#ifdef WDS_SUPPORT
	WdsDown(pAd);
#endif // WDS_SUPPORT //

	mdelay(20); /* wait for disconnect requests transmitted */

	for (i = 0 ; i < NUM_OF_TX_RING; i++)
	{
		while (pAd->DeQueueRunning[i] == TRUE)
		{
			DBGPRINT(RT_DEBUG_TRACE, ("Waiting for TxQueue[%d] done..........\n", i));
			RTMPusecDelay(1000);
		}
	}
	

#ifdef CONFIG_AP_SUPPORT

	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{

#ifdef DOT11N_DRAFT3
		if (pAd->CommonCfg.Bss2040CoexistFlag & BSS_2040_COEXIST_TIMER_FIRED)
		{
			RTMPCancelTimer(&pAd->CommonCfg.Bss2040CoexistTimer, &Cancelled);
			pAd->CommonCfg.Bss2040CoexistFlag  = 0;
		}
#endif // DOT11N_DRAFT3 //

		// PeriodicTimer already been canceled by MlmeHalt() API.
		//RTMPCancelTimer(&pAd->PeriodicTimer,	&Cancelled);
	}
#endif // CONFIG_AP_SUPPORT //

	// Stop Mlme state machine
	MlmeHalt(pAd);
	
	// Close net tasklets
	RtmpNetTaskExit(pAd);



#ifdef CONFIG_AP_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
#ifdef MAT_SUPPORT
		MATEngineExit(pAd);
#endif // MAT_SUPPORT //

#ifdef CLIENT_WDS
		CliWds_ProxyTabDestory(pAd);
#endif // CLIENT_WDS //
		// Shutdown Access Point function, release all related resources 
		APShutdown(pAd);

#ifdef AUTO_CH_SELECT_ENHANCE
		// Free BssTab & ChannelInfo tabbles.
		AutoChBssTableDestroy(pAd);
		ChannelInfoDestroy(pAd);
#endif // AUTO_CH_SELECT_ENHANCE //
	}
#endif // CONFIG_AP_SUPPORT //

	MeasureReqTabExit(pAd);
	TpcReqTabExit(pAd);

#ifdef WSC_INCLUDED
#ifdef CONFIG_AP_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
		INT ap_idx;
		for (ap_idx = 0; ap_idx < pAd->ApCfg.BssidNum; ap_idx++)
		{
			PWSC_CTRL	pWpsCtrl = &pAd->ApCfg.MBSSID[ap_idx].WscControl;
			WscStop(pAd, FALSE, pWpsCtrl);
		}
#ifdef APCLI_SUPPORT
		WscStop(pAd, TRUE, &pAd->ApCfg.ApCliTab[BSS0].WscControl);
#endif // APCLI_SUPPORT //
	}
#endif // CONFIG_AP_SUPPORT //

#ifdef OLD_DH_KEY
#ifdef CONFIG_AP_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	    	WSC_VFREE_KEY_MEM(pAd->ApCfg.MBSSID[0].WscControl.pPubKeyMem, pAd->ApCfg.MBSSID[0].WscControl.pSecKeyMem);
#endif // CONFIG_AP_SUPPORT //
#endif // OLD_DH_KEY //

	/* WSC hardware push button function 0811 */
	WSC_HDR_BTN_Stop(pAd);
#endif // WSC_INCLUDED //

	// Close kernel threads
	RtmpMgmtTaskExit(pAd);

#ifdef RTMP_MAC_PCI
	{
			BOOLEAN brc;
			//	ULONG			Value;

			if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
			{
				RTMP_ASIC_INTERRUPT_DISABLE(pAd);
			}

			// Receive packets to clear DMA index after disable interrupt. 
			//RTMPHandleRxDoneInterrupt(pAd);
			// put to radio off to save power when driver unload.  After radiooff, can't write /read register.  So need to finish all 
			// register access before Radio off.


			brc=RT28xxPciAsicRadioOff(pAd, RTMP_HALT, 0);

//In  solution 3 of 3090F, the bPCIclkOff will be set to TRUE after calling RT28xxPciAsicRadioOff
#ifdef PCIE_PS_SUPPORT
			pAd->bPCIclkOff = FALSE;    
#endif // PCIE_PS_SUPPORT //

			if (brc==FALSE)
			{
				DBGPRINT(RT_DEBUG_ERROR,("%s call RT28xxPciAsicRadioOff fail !!\n", __FUNCTION__)); 
			}
	}
	

/*
	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
	{
		RTMP_ASIC_INTERRUPT_DISABLE(pAd);
	}

	// Disable Rx, register value supposed will remain after reset
	NICIssueReset(pAd);
*/
#endif // RTMP_MAC_PCI //

	// Free IRQ
	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
	{
#ifdef RTMP_MAC_PCI
		// Deregister interrupt function
		RtmpOSIRQRelease(net_dev);
#endif // RTMP_MAC_PCI //
		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
	}

#ifdef RESOURCE_PRE_ALLOC
	RTMPResetTxRxRingMemory(pAd);
#else
	// Free Ring or USB buffers
	RTMPFreeTxRxRingMemory(pAd);
#endif // RESOURCE_PRE_ALLOC //

	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);

#ifdef DOT11_N_SUPPORT
	// Free BA reorder resource
	ba_reordering_resource_release(pAd);
#endif // DOT11_N_SUPPORT //
	

	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);

/*+++Modify by woody to solve the bulk fail+++*/

#ifdef VENDOR_FEATURE2_SUPPORT
	printk("Number of Packet Allocated = %d\n", pAd->NumOfPktAlloc);
	printk("Number of Packet Freed = %d\n", pAd->NumOfPktFree);
#endif // VENDOR_FEATURE2_SUPPORT //

	/* clear MAC table */
	/* TODO: do not clear spin lock, such as fLastChangeAccordingMfbLock */
	NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE));

	/* release all timers */
	RTMPusecDelay(2000);
	RTMP_TimerListRelease(pAd);

	DBGPRINT(RT_DEBUG_TRACE, ("<=== rt28xx_close\n"));
	return 0; // close ok
} /* End of rt28xx_close */
Example #3
0
VOID RTMPDrvClose(
	IN VOID				*pAdSrc,
	IN VOID				*net_dev)
{
	PRTMP_ADAPTER	pAd = (PRTMP_ADAPTER)pAdSrc;
	BOOLEAN 		Cancelled;
	UINT32			i = 0;


	Cancelled = FALSE;

#ifdef CONFIG_AP_SUPPORT
#ifdef BG_FT_SUPPORT
	BG_FTPH_Remove();
#endif /* BG_FT_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */

#ifdef RTMP_RBUS_SUPPORT
#ifdef RT3XXX_ANTENNA_DIVERSITY_SUPPORT
	RT3XXX_AntDiversity_Fini(pAd);
#endif /* RT3XXX_ANTENNA_DIVERSITY_SUPPORT */
#endif /* RTMP_RBUS_SUPPORT */

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
#ifdef PCIE_PS_SUPPORT
		RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE);
#endif /* PCIE_PS_SUPPORT */

		/* If dirver doesn't wake up firmware here,*/
		/* NICLoadFirmware will hang forever when interface is up again.*/
		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
        {      
		    AsicForceWakeup(pAd, TRUE);
        }


#ifdef RTMP_MAC_PCI
		pAd->bPCIclkOff = FALSE;    
#endif /* RTMP_MAC_PCI */
	}
#endif /* CONFIG_STA_SUPPORT */

	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);



#ifdef WDS_SUPPORT
	WdsDown(pAd);
#endif /* WDS_SUPPORT */

	for (i = 0 ; i < NUM_OF_TX_RING; i++)
	{
		while (pAd->DeQueueRunning[i] == TRUE)
		{
			DBGPRINT(RT_DEBUG_TRACE, ("Waiting for TxQueue[%d] done..........\n", i));
			RTMPusecDelay(1000);
		}
	}
	

#ifdef CONFIG_AP_SUPPORT

	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{

#ifdef DOT11N_DRAFT3
		if (pAd->CommonCfg.Bss2040CoexistFlag & BSS_2040_COEXIST_TIMER_FIRED)
		{
			RTMPCancelTimer(&pAd->CommonCfg.Bss2040CoexistTimer, &Cancelled);
			pAd->CommonCfg.Bss2040CoexistFlag  = 0;
		}
#endif /* DOT11N_DRAFT3 */

		/* PeriodicTimer already been canceled by MlmeHalt() API.*/
		/*RTMPCancelTimer(&pAd->PeriodicTimer,	&Cancelled);*/
	}
#endif /* CONFIG_AP_SUPPORT */

	/* Stop Mlme state machine*/
	MlmeHalt(pAd);
	
	/* Close net tasklets*/
	RtmpNetTaskExit(pAd);


#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		MacTableReset(pAd);
#ifdef MAT_SUPPORT
		MATEngineExit(pAd);
#endif /* MAT_SUPPORT */
#ifdef LED_CONTROL_SUPPORT
		RTMPSetLED(pAd, LED_LINK_DOWN);
#endif /* LED_CONTROL_SUPPORT */

		MlmeRadioOff(pAd);
	}
#endif /* CONFIG_STA_SUPPORT */

#ifdef CONFIG_AP_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
#ifdef MAT_SUPPORT
		MATEngineExit(pAd);
#endif /* MAT_SUPPORT */

#ifdef CLIENT_WDS
		CliWds_ProxyTabDestory(pAd);
#endif /* CLIENT_WDS */
		/* Shutdown Access Point function, release all related resources */
		APShutdown(pAd);

/*#ifdef AUTO_CH_SELECT_ENHANCE*/
		/* Free BssTab & ChannelInfo tabbles.*/
		AutoChBssTableDestroy(pAd);
		ChannelInfoDestroy(pAd);
/*#endif  AUTO_CH_SELECT_ENHANCE */
	}
#endif /* CONFIG_AP_SUPPORT */

	MeasureReqTabExit(pAd);
	TpcReqTabExit(pAd);

#ifdef LED_CONTROL_SUPPORT
	RTMPExitLEDMode(pAd);
#endif // LED_CONTROL_SUPPORT


	/* Close kernel threads*/
	RtmpMgmtTaskExit(pAd);

#ifdef RTMP_MAC_PCI
	{
#ifdef RTMP_PCI_SUPPORT
			BOOLEAN brc;
#endif /* RTMP_PCI_SUPPORT */

			if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
			{
				RTMP_ASIC_INTERRUPT_DISABLE(pAd);
			}

			/* Receive packets to clear DMA index after disable interrupt. */
			/*RTMPHandleRxDoneInterrupt(pAd);*/
			/* put to radio off to save power when driver unload.  After radiooff, can't write /read register.  So need to finish all */
			/* register access before Radio off.*/

#ifdef RTMP_PCI_SUPPORT
			brc=RT28xxPciAsicRadioOff(pAd, RTMP_HALT, 0);

/*In  solution 3 of 3090F, the bPCIclkOff will be set to TRUE after calling RT28xxPciAsicRadioOff*/
#ifdef PCIE_PS_SUPPORT
			pAd->bPCIclkOff = FALSE;    
#endif /* PCIE_PS_SUPPORT */

			if (brc==FALSE)
			{
				DBGPRINT(RT_DEBUG_ERROR,("%s call RT28xxPciAsicRadioOff fail !!\n", __FUNCTION__)); 
			}
#endif /* RTMP_PCI_SUPPORT */
	}
	

#endif /* RTMP_MAC_PCI */

	/* Free IRQ*/
	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
	{
#ifdef RTMP_MAC_PCI
		/* Deregister interrupt function*/
		RTMP_OS_IRQ_RELEASE(pAd, net_dev);
#endif /* RTMP_MAC_PCI */
		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
	}

	/* Free Ring or USB buffers*/
#ifdef RESOURCE_PRE_ALLOC
	RTMPResetTxRxRingMemory(pAd);
#else
	/* Free Ring or USB buffers*/
	RTMPFreeTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */

	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);

#ifdef DOT11_N_SUPPORT
	/* Free BA reorder resource*/
	ba_reordering_resource_release(pAd);
#endif /* DOT11_N_SUPPORT */

	UserCfgExit(pAd); /* must after ba_reordering_resource_release */

#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */

	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);

/*+++Modify by woody to solve the bulk fail+++*/
#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
	}
#endif /* CONFIG_STA_SUPPORT */

	/* clear MAC table */
	/* TODO: do not clear spin lock, such as fLastChangeAccordingMfbLock */
	NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE));

	/* release all timers */
	RTMPusecDelay(2000);
	RTMP_TimerListRelease(pAd);
}