BOOL
PWR_PowerUp(DWORD pContext)
{
PWRBTN_INF((_T("[PWR] PWR_PowerUp(0x%08x)\r\n"), pContext));
// Do not Disable Interrupt for Power Bottun
// Also Do not Clear Pending.
// After Wake Up. Button Driver Should Get Interrupt
// and Set System Power State to Resume...
// Interrupt Disable
Button_pwrbtn_disable_interrupt();
//Button_rstbtn_disable_interrupt();
// Port Initialize as External Interrupt
Button_port_initialize();
// Interrupt Siganl Method and Filtering
Button_pwrbtn_set_interrupt_method(EINT_SIGNAL_RISE_EDGE);
Button_pwrbtn_set_filter_method(EINT_FILTER_DELAY, 0);
//Button_rstbtn_set_interrupt_method(EINT_SIGNAL_FALL_EDGE);
//Button_rstbtn_set_filter_method(EINT_FILTER_DELAY, 0);
// Clear Interrupt Pending
Button_pwrbtn_clear_interrupt_pending();
//Button_rstbtn_clear_interrupt_pending();
// Enable Interrupt
Button_pwrbtn_enable_interrupt();
//Button_rstbtn_enable_interrupt();
return TRUE;
}
BOOL
PWR_PowerDown(DWORD pContext)
{
PWRBTN_INF((_T("[PWR] PWR_PowerDown(0x%08x)\r\n"), pContext));
// Interrupt Disable and Clear Pending
Button_pwrbtn_disable_interrupt();
Button_pwrbtn_clear_interrupt_pending();
Button_rstbtn_disable_interrupt();
Button_rstbtn_clear_interrupt_pending();
return TRUE;
}
INT WINAPI PowerButtonThread(void)
{
DWORD nBtnCount = 0;
PWRBTN_INF((_T("[PWR:INF] ++PowerButtonThread()\r\n")));
while(!g_bExitThread)
{
WaitForSingleObject(g_hEventPowerBtn, INFINITE);
if(g_bExitThread)
{
break;
}
Button_pwrbtn_disable_interrupt(); // Mask EINT
Button_pwrbtn_clear_interrupt_pending(); // Clear Interrupt Pending
InterruptDone(g_dwSysIntrPowerBtn);
while(Button_pwrbtn_is_pushed())
{
// Wait for Button Released...
Sleep(10);
}
nBtnCount++;
PWRBTN_INF((_T("[PWR] Power Button Event [%d]\r\n"), nBtnCount));
//PowerPolicyNotify(PPN_POWERBUTTONPRESSED,0);
SetSystemPowerState(NULL, POWER_STATE_SUSPEND, POWER_FORCE);
Button_pwrbtn_enable_interrupt(); // UnMask EINT
}
PWRBTN_INF((_T("[PWR:INF] --PowerButtonThread()\r\n")));
return 0;
}
BOOL PWR_Deinit(DWORD pContext)
{
PWRBTN_MSG((_T("[PWR] ++PWR_Deinit(0x%08x)\r\n"), pContext));
g_bExitThread = TRUE;
if (g_hThreadPowerBtn) // Make Sure if thread is exist
{
Button_pwrbtn_disable_interrupt();
Button_pwrbtn_clear_interrupt_pending();
// Signal Thread to Finish
SetEvent(g_hEventPowerBtn);
// Wait for Thread to Finish
WaitForSingleObject(g_hThreadPowerBtn, INFINITE);
CloseHandle(g_hThreadPowerBtn);
g_hThreadPowerBtn = NULL;
}
if (g_hThreadResetBtn) // Make Sure if thread is exist
{
Button_rstbtn_disable_interrupt();
Button_rstbtn_clear_interrupt_pending();
// Signal Thread to Finish
SetEvent(g_hEventResetBtn);
// Wait for Thread to Finish
WaitForSingleObject(g_hThreadResetBtn, INFINITE);
CloseHandle(g_hThreadResetBtn);
g_hThreadResetBtn = NULL;
}
PWR_ReleaseResources();
PWRBTN_MSG((_T("[PWR] --PWR_Deinit()\r\n")));
return TRUE;
}
INT WINAPI PowerButtonThread(void)
{
DWORD nBtnCount = 0;
WCHAR state[1024] = {0};
LPWSTR pState = &state[0];
DWORD dwBufChars = (sizeof(state) / sizeof(state[0]));
DWORD dwStateFlags = 0;
DWORD dwErr;
PWRBTN_INF((_T("[PWR:INF] ++PowerButtonThread()\r\n")));
while(!g_bExitThread)
{
WaitForSingleObject(g_hEventPowerBtn, INFINITE);
if(g_bExitThread)
{
break;
}
Button_pwrbtn_disable_interrupt(); // Mask EINT
Button_pwrbtn_clear_interrupt_pending(); // Clear Interrupt Pending
dwErr = GetSystemPowerState(pState, dwBufChars, &dwStateFlags);
if (ERROR_SUCCESS != dwErr)
{
RETAILMSG(1, (TEXT("PMGET!GetSystemPowerState:ERROR:%d\n"), dwErr));
}
else
{
RETAILMSG(1, (TEXT("PMGET! System Power state is '%s', flags 0x%08x\n"), state, dwStateFlags));
}
InterruptDone(g_dwSysIntrPowerBtn);
#ifndef SLEEP_AGING_TEST
while(Button_pwrbtn_is_pushed())
{
// Wait for Button Released...
Sleep(10);
}
#endif
nBtnCount++;
PWRBTN_INF((_T("[PWR] Power Button Event [%d]\r\n"), nBtnCount));
//SetSystemPowerState(NULL, POWER_STATE_SUSPEND, POWER_FORCE);
//PowerPolicyNotify(PPN_POWERBUTTONPRESSED,0);
if ( wcscmp(state,TEXT("screenoff")) == 0 )
{
RETAILMSG(1,(TEXT("setsystempowerstate to ON from screen off\r\n")));
SetSystemPowerState( NULL, POWER_STATE_ON, POWER_FORCE );
}
else if ( wcscmp(state,TEXT("backlightoff")) == 0 )
{
#ifdef WPC
RETAILMSG(1,(TEXT("setsystempowerstate to ON from backlight off\r\n")));
SetSystemPowerState( NULL, POWER_STATE_ON, POWER_FORCE );
#endif
#ifdef SMARTFON
RETAILMSG(1,(TEXT("setsystempowerstate to IDLE from backlight off\r\n")));
SetSystemPowerState( TEXT("useridle"), POWER_STATE_IDLE, POWER_FORCE );
#endif
}
else
{
#ifdef WPC
//SetSystemPowerState( NULL, POWER_STATE_SUSPEND, POWER_FORCE );
PowerPolicyNotify(PPN_POWERBUTTONPRESSED,0);
#endif
#ifdef SMARTFON
RETAILMSG(1,(TEXT("setsystempowerstate to IDLE from on\r\n")));
SetSystemPowerState( TEXT("useridle"), POWER_STATE_IDLE, POWER_FORCE );
#endif
}
Button_pwrbtn_enable_interrupt(); // UnMask EINT
#ifdef SLEEP_AGING_TEST
Sleep(2000);
SetEvent(g_hEventPowerBtn);
#endif
}
PWRBTN_INF((_T("[PWR:INF] --PowerButtonThread()\r\n")));
return 0;
}
DWORD
PWR_Init(DWORD dwContext)
{
PWRBTN_MSG((_T("[PWR] ++PWR_Init(0x%08x)\r\n"), dwContext));
if (PWR_AllocResources() == FALSE)
{
PWRBTN_ERR((_T("[PWR:ERR] PWR_Init() : PWR_AllocResources() Failed \n\r")));
goto CleanUp;
}
Button_initialize_register_address((void *)g_pGPIOReg);
// Interrupt Disable and Clear Pending
Button_pwrbtn_disable_interrupt();
//Button_rstbtn_disable_interrupt();
// Initialize Port as External Interrupt
Button_port_initialize();
// Create Power Button Thread
g_hThreadPowerBtn = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) PowerButtonThread, NULL, 0, NULL);
if (g_hThreadPowerBtn == NULL )
{
PWRBTN_ERR((_T("[PWR:ERR] PWR_Init() : CreateThread() Power Button Failed \n\r")));
goto CleanUp;
}
// Create Reset Button Thread
// g_hThreadResetBtn = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) ResetButtonThread, NULL, 0, NULL);
// if (g_hThreadResetBtn == NULL )
// {
// PWRBTN_ERR((_T("[PWR:ERR] PWR_Init() : CreateThread() Reset Button Failed \n\r")));
// goto CleanUp;
// }
// Interrupt Siganl Method and Filtering
Button_pwrbtn_set_interrupt_method(EINT_SIGNAL_RISE_EDGE);
Button_pwrbtn_set_filter_method(EINT_FILTER_DELAY, 0);
//Button_rstbtn_set_interrupt_method(EINT_SIGNAL_FALL_EDGE);
//Button_rstbtn_set_filter_method(EINT_FILTER_DELAY, 0);
// Clear Interrupt Pending
Button_pwrbtn_clear_interrupt_pending();
//Button_rstbtn_clear_interrupt_pending();
// Enable Interrupt
Button_pwrbtn_enable_interrupt();
//Button_rstbtn_enable_interrupt();
PWRBTN_MSG((_T("[PWR] --PWR_Init()\r\n")));
return TRUE;
CleanUp:
PWRBTN_ERR((_T("[PWR:ERR] --PWR_Init() : Failed\r\n")));
PWR_Deinit(0);
return FALSE;
}
