C++ (Cpp) CEC_PINMUX Examples

Example #1

File: board-x3-pinmux_rev_e.c Project: JoinTheRealms/CopyCat-Kernel-P880

#endif
//                                
	//DEFAULT_PINMUX(SPI1_MISO,       SPI1,            PULL_DOWN, TRISTATE,   INPUT),
	DEFAULT_PINMUX(SPI1_MISO,       RSVD3,             NORMAL, NORMAL,   OUTPUT), 		//SENSOR_LDO_EN (MPU6050, AMI306 - VDD, THEMAL, CURRENT IC)	
	DEFAULT_PINMUX(PEX_L0_PRSNT_N,  PCIE,            NORMAL,    TRISTATE,   INPUT),
	DEFAULT_PINMUX(PEX_L0_RST_N,    PCIE,            NORMAL,    TRISTATE,   OUTPUT),
	DEFAULT_PINMUX(PEX_L0_CLKREQ_N, PCIE,            NORMAL,    TRISTATE,   INPUT),
	DEFAULT_PINMUX(PEX_WAKE_N,      PCIE,            NORMAL,    TRISTATE,   INPUT),
	DEFAULT_PINMUX(PEX_L1_PRSNT_N,  PCIE,            NORMAL,    NORMAL,     INPUT),
	DEFAULT_PINMUX(PEX_L1_RST_N,    PCIE,            NORMAL,    NORMAL,     OUTPUT),
	DEFAULT_PINMUX(PEX_L1_CLKREQ_N, PCIE,            NORMAL,    NORMAL,     INPUT),
	DEFAULT_PINMUX(PEX_L2_PRSNT_N,  PCIE,            NORMAL,    TRISTATE,   INPUT),
	DEFAULT_PINMUX(PEX_L2_RST_N,    PCIE,            NORMAL,    TRISTATE,   INPUT),
	DEFAULT_PINMUX(PEX_L2_CLKREQ_N, PCIE,            NORMAL,    TRISTATE,   INPUT),
//	DEFAULT_PINMUX(HDMI_CEC,        CEC,             NORMAL,    NORMAL,     INPUT),
	CEC_PINMUX(HDMI_CEC,            CEC,             NORMAL,    TRISTATE,   OUTPUT, DEFAULT, DISABLE),
	DEFAULT_PINMUX(HDMI_INT,        RSVD0,           NORMAL,    TRISTATE,   INPUT),

	/* Gpios */
	/* SDMMC1 CD gpio */
	DEFAULT_PINMUX(GMI_IORDY,       RSVD1,             PULL_UP,    NORMAL,     INPUT),//                                              
	/* SDMMC1 WP gpio */
	DEFAULT_PINMUX(VI_D11,          RSVD1,           PULL_UP,    NORMAL,     INPUT),

	/* Power rails GPIO */
	VI_PINMUX(VI_D6,           VI,              NORMAL,    NORMAL,     OUTPUT, DISABLE, DISABLE),
	VI_PINMUX(VI_D8,           SDMMC2,          NORMAL,    NORMAL,     INPUT,  DISABLE, DISABLE),
	VI_PINMUX(VI_D9,           SDMMC2,          NORMAL,    NORMAL,     INPUT,  DISABLE, DISABLE),
	VI_PINMUX(VI_PCLK,         RSVD1,           PULL_UP,   TRISTATE,   INPUT,  DISABLE, ENABLE),
	VI_PINMUX(VI_HSYNC,        RSVD1,           NORMAL,    NORMAL,     INPUT,  DISABLE, DISABLE),
	VI_PINMUX(VI_VSYNC,        RSVD1,           NORMAL,    NORMAL,     INPUT,  DISABLE, DISABLE),

Example #2

File: board-pluto-pinmux.c Project: Packmaan7144/kernel_nvidia_s8515

    DEFAULT_PINMUX(GMI_AD12,    GMI,     NORMAL,    NORMAL,    OUTPUT),
    DEFAULT_PINMUX(GMI_AD13,    GMI,     NORMAL,    NORMAL,    OUTPUT),
    DEFAULT_PINMUX(GMI_AD14,    GMI,     NORMAL,    NORMAL,    OUTPUT),
    DEFAULT_PINMUX(GMI_AD8,     GMI,     NORMAL,    NORMAL,    OUTPUT),
    DEFAULT_PINMUX(GMI_ADV_N,   GMI,     NORMAL,    NORMAL,    INPUT),
    DEFAULT_PINMUX(GMI_CLK,     GMI,     NORMAL,    NORMAL,    OUTPUT),
    DEFAULT_PINMUX(GMI_CS0_N,   GMI,     NORMAL,    NORMAL,    INPUT),
    DEFAULT_PINMUX(GMI_CS3_N,   GMI,     NORMAL,    NORMAL,    OUTPUT),
    DEFAULT_PINMUX(GMI_CS4_N,   GMI,     NORMAL,    NORMAL,    INPUT),
    DEFAULT_PINMUX(GMI_CS7_N,   GMI,     NORMAL,    NORMAL,    INPUT),
    DEFAULT_PINMUX(GMI_IORDY,   GMI,     NORMAL,    NORMAL,    INPUT),
    DEFAULT_PINMUX(GMI_RST_N,   GMI,     NORMAL,    NORMAL,    INPUT),

    /* VDDIO_HV_AP */
    DEFAULT_PINMUX(OWR,  OWR,  NORMAL, TRISTATE, INPUT),
    CEC_PINMUX(HDMI_CEC, CEC,  NORMAL, TRISTATE, INPUT, DISABLE, ENABLE),
    I2C_PINMUX(DDC_SCL,  I2C4, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT),
    I2C_PINMUX(DDC_SDA,  I2C4, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT),
    USB_PINMUX(USB_VBUS_EN0, RSVD3, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE),
};
#endif

/* THIS IS FOR EXPERIMENTAL OR WORKAROUND PURPOSES. ANYTHING INSIDE THIS TABLE
 * SHOULD BE CONSIDERED TO BE PUSHED TO PINMUX SPREADSHEET FOR CONSISTENCY
 */
static __initdata struct tegra_pingroup_config manual_config_pinmux[] = {
};

static void __init pluto_gpio_init_configure(void)
{
    int len;