static int
slugled_tmr(void *arg)
{
struct clockframe *cf = arg;
uint32_t reg, bit;
int is;
if (CLKF_INTR(cf) || sched_curcpu_runnable_p() ||
(curlwp != NULL && curlwp != curcpu()->ci_data.cpu_idlelwp))
bit = LEDBITS_STATUS;
else
bit = 0;
is = disable_interrupts(I32_bit);
reg = GPIO_CONF_READ_4(ixp425_softc, IXP425_GPIO_GPOUTR);
reg &= ~LEDBITS_STATUS;
GPIO_CONF_WRITE_4(ixp425_softc, IXP425_GPIO_GPOUTR, reg | bit);
restore_interrupts(is);
return (1);
}
/*
* Statistics clock. Grab profile sample, and if divider reaches 0,
* do process and kernel statistics.
*/
void
statclock(struct clockframe *frame)
{
#ifdef GPROF
struct gmonparam *g;
u_long i;
#endif
struct cpu_info *ci = curcpu();
struct schedstate_percpu *spc = &ci->ci_schedstate;
struct proc *p = curproc;
struct process *pr;
/*
* Notice changes in divisor frequency, and adjust clock
* frequency accordingly.
*/
if (spc->spc_psdiv != psdiv) {
spc->spc_psdiv = psdiv;
spc->spc_pscnt = psdiv;
if (psdiv == 1) {
setstatclockrate(stathz);
} else {
setstatclockrate(profhz);
}
}
if (CLKF_USERMODE(frame)) {
pr = p->p_p;
if (pr->ps_flags & PS_PROFIL)
addupc_intr(p, CLKF_PC(frame));
if (--spc->spc_pscnt > 0)
return;
/*
* Came from user mode; CPU was in user state.
* If this process is being profiled record the tick.
*/
p->p_uticks++;
if (pr->ps_nice > NZERO)
spc->spc_cp_time[CP_NICE]++;
else
spc->spc_cp_time[CP_USER]++;
} else {
#ifdef GPROF
/*
* Kernel statistics are just like addupc_intr, only easier.
*/
g = ci->ci_gmon;
if (g != NULL && g->state == GMON_PROF_ON) {
i = CLKF_PC(frame) - g->lowpc;
if (i < g->textsize) {
i /= HISTFRACTION * sizeof(*g->kcount);
g->kcount[i]++;
}
}
#endif
#if defined(PROC_PC)
if (p != NULL && p->p_p->ps_flags & PS_PROFIL)
addupc_intr(p, PROC_PC(p));
#endif
if (--spc->spc_pscnt > 0)
return;
/*
* Came from kernel mode, so we were:
* - handling an interrupt,
* - doing syscall or trap work on behalf of the current
* user process, or
* - spinning in the idle loop.
* Whichever it is, charge the time as appropriate.
* Note that we charge interrupts to the current process,
* regardless of whether they are ``for'' that process,
* so that we know how much of its real time was spent
* in ``non-process'' (i.e., interrupt) work.
*/
if (CLKF_INTR(frame)) {
if (p != NULL)
p->p_iticks++;
spc->spc_cp_time[CP_INTR]++;
} else if (p != NULL && p != spc->spc_idleproc) {
p->p_sticks++;
spc->spc_cp_time[CP_SYS]++;
} else
spc->spc_cp_time[CP_IDLE]++;
}
spc->spc_pscnt = psdiv;
if (p != NULL) {
p->p_cpticks++;
/*
* If no schedclock is provided, call it here at ~~12-25 Hz;
* ~~16 Hz is best
*/
if (schedhz == 0) {
if ((++curcpu()->ci_schedstate.spc_schedticks & 3) ==
0)
schedclock(p);
}
}
}
/*
* Statistics clock. Grab profile sample, and if divider reaches 0,
* do process and kernel statistics.
*/
void
statclock(struct clockframe *frame)
{
#ifdef GPROF
struct gmonparam *g;
intptr_t i;
#endif
struct cpu_info *ci = curcpu();
struct schedstate_percpu *spc = &ci->ci_schedstate;
struct proc *p;
struct lwp *l;
/*
* Notice changes in divisor frequency, and adjust clock
* frequency accordingly.
*/
if (spc->spc_psdiv != psdiv) {
spc->spc_psdiv = psdiv;
spc->spc_pscnt = psdiv;
if (psdiv == 1) {
setstatclockrate(stathz);
} else {
setstatclockrate(profhz);
}
}
l = ci->ci_data.cpu_onproc;
if ((l->l_flag & LW_IDLE) != 0) {
/*
* don't account idle lwps as swapper.
*/
p = NULL;
} else {
p = l->l_proc;
mutex_spin_enter(&p->p_stmutex);
}
if (CLKF_USERMODE(frame)) {
if ((p->p_stflag & PST_PROFIL) && profsrc == PROFSRC_CLOCK)
addupc_intr(l, CLKF_PC(frame));
if (--spc->spc_pscnt > 0) {
mutex_spin_exit(&p->p_stmutex);
return;
}
/*
* Came from user mode; CPU was in user state.
* If this process is being profiled record the tick.
*/
p->p_uticks++;
if (p->p_nice > NZERO)
spc->spc_cp_time[CP_NICE]++;
else
spc->spc_cp_time[CP_USER]++;
} else {
#ifdef GPROF
/*
* Kernel statistics are just like addupc_intr, only easier.
*/
g = &_gmonparam;
if (profsrc == PROFSRC_CLOCK && g->state == GMON_PROF_ON) {
i = CLKF_PC(frame) - g->lowpc;
if (i < g->textsize) {
i /= HISTFRACTION * sizeof(*g->kcount);
g->kcount[i]++;
}
}
#endif
#ifdef LWP_PC
if (p != NULL && profsrc == PROFSRC_CLOCK &&
(p->p_stflag & PST_PROFIL)) {
addupc_intr(l, LWP_PC(l));
}
#endif
if (--spc->spc_pscnt > 0) {
if (p != NULL)
mutex_spin_exit(&p->p_stmutex);
return;
}
/*
* Came from kernel mode, so we were:
* - handling an interrupt,
* - doing syscall or trap work on behalf of the current
* user process, or
* - spinning in the idle loop.
* Whichever it is, charge the time as appropriate.
* Note that we charge interrupts to the current process,
* regardless of whether they are ``for'' that process,
* so that we know how much of its real time was spent
* in ``non-process'' (i.e., interrupt) work.
*/
if (CLKF_INTR(frame) || (curlwp->l_pflag & LP_INTR) != 0) {
if (p != NULL) {
p->p_iticks++;
}
spc->spc_cp_time[CP_INTR]++;
} else if (p != NULL) {
p->p_sticks++;
spc->spc_cp_time[CP_SYS]++;
} else {
spc->spc_cp_time[CP_IDLE]++;
}
}
spc->spc_pscnt = psdiv;
if (p != NULL) {
atomic_inc_uint(&l->l_cpticks);
mutex_spin_exit(&p->p_stmutex);
}
}
