/*******************************************************************************
* Code for BOARD_BootClockRUN configuration
******************************************************************************/
void BOARD_BootClockRUN(void)
{
/* Setup the reference oscillator. */
BOARD_RfOscInit();
/* Set the system clock dividers in SIM to safe value. */
CLOCK_SetSimSafeDivs();
/* Enable RTC oscillator. */
CLOCK_CONFIG_EnableRtcOsc(RTC_OSC_CAP_LOAD_0PF);
/* Initializes OSC0 according to Ref OSC needs. */
BOARD_InitOsc0();
/* Set MCG to FEE mode. */
CLOCK_BootToFeeMode(mcgConfig_BOARD_BootClockRUN.oscsel,
mcgConfig_BOARD_BootClockRUN.frdiv,
mcgConfig_BOARD_BootClockRUN.dmx32,
mcgConfig_BOARD_BootClockRUN.drs,
CLOCK_CONFIG_FllStableDelay);
/* Configure the Internal Reference clock (MCGIRCLK). */
CLOCK_SetInternalRefClkConfig(mcgConfig_BOARD_BootClockRUN.irclkEnableMode,
mcgConfig_BOARD_BootClockRUN.ircs,
mcgConfig_BOARD_BootClockRUN.fcrdiv);
/* Set the clock configuration in SIM module. */
CLOCK_SetSimConfig(&simConfig_BOARD_BootClockRUN);
/* Configure RTC clock. */
CLOCK_CONFIG_SetRtcClock();
/* Set SystemCoreClock variable. */
SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
/* Set LPUART0 clock source. */
CLOCK_SetLpuartClock(SIM_LPUART_CLK_SEL_OSCERCLK_CLK);
/* Set TPM clock source. */
CLOCK_SetTpmClock(SIM_TPM_CLK_SEL_OSCERCLK_CLK);
}
void APP_BootToFeeExample(void)
{
/* Boot to Fee mode */
CLOCK_BootToFeeMode(kMCG_OscselOsc, g_frdivValue, kMCG_Dmx32Default, kMCG_DrsLow, APP_FllStableDelay);
assert(kMCG_ModeFEE == CLOCK_GetMode());
}
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!Configuration
name: BOARD_BootClockVLPR
outputs:
- {id: Bus_clock.outFreq, value: 800 kHz}
- {id: Core_clock.outFreq, value: 4 MHz}
- {id: Flash_clock.outFreq, value: 800 kHz}
- {id: LPO_clock.outFreq, value: 1 kHz}
- {id: MCGIRCLK.outFreq, value: 4 MHz}
- {id: System_clock.outFreq, value: 4 MHz}
settings:
- {id: MCGMode, value: BLPI}
- {id: powerMode, value: VLPR}
- {id: MCG.CLKS.sel, value: MCG.IRCS}
- {id: MCG.FCRDIV.scale, value: '1'}
- {id: MCG.IRCS.sel, value: MCG.FCRDIV}
- {id: MCG_C1_IRCLKEN_CFG, value: Enabled}
- {id: SIM.OUTDIV4.scale, value: '5'}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
void BOARD_BootClockVLPR(void)
{
const sim_clock_config_t simConfig = {
.er32kSrc = 0U, .clkdiv1 = 0x00040000U,
};
/* ERR010224 */
RSIM->RF_OSC_CTRL |= RSIM_RF_OSC_CTRL_RADIO_EXT_OSC_OVRD_EN_MASK; /* Prevent XTAL_OUT_EN from generating XTAL_OUT request */
CLOCK_SetSimSafeDivs();
CLOCK_BootToBlpiMode(0U, kMCG_IrcFast, kMCG_IrclkEnable);
CLOCK_SetSimConfig(&simConfig);
SystemCoreClock = 4000000U;
SMC_SetPowerModeProtection(SMC, kSMC_AllowPowerModeAll);
SMC_SetPowerModeVlpr(SMC);
while (SMC_GetPowerModeState(SMC) != kSMC_PowerStateVlpr)
{
}
}
/*******************************************************************************
********************** Configuration BOARD_BootClockRUN ***********************
******************************************************************************/
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!Configuration
name: BOARD_BootClockRUN
called_from_default_init: true
outputs:
- {id: Bus_clock.outFreq, value: 20 MHz}
- {id: Core_clock.outFreq, value: 40 MHz}
- {id: Flash_clock.outFreq, value: 20 MHz}
- {id: LPO_clock.outFreq, value: 1 kHz}
- {id: MCGFLLCLK.outFreq, value: 40 MHz}
- {id: MCGIRCLK.outFreq, value: 32.768 kHz}
- {id: OSCERCLK.outFreq, value: 32 MHz}
- {id: System_clock.outFreq, value: 40 MHz}
settings:
- {id: MCGMode, value: FEE}
- {id: MCG.FCRDIV.scale, value: '1'}
- {id: MCG.FLL_mul.scale, value: '1280'}
- {id: MCG.FRDIV.scale, value: '1024'}
- {id: MCG.IREFS.sel, value: MCG.FRDIV}
- {id: MCG_C1_IRCLKEN_CFG, value: Enabled}
- {id: MCG_C2_RANGE0_FRDIV_CFG, value: Very_high}
- {id: MCG_C2_RANGE_CFG, value: Very_high}
- {id: RTC_CR_OSCE_CFG, value: Oscillator_enabled}
sources:
- {id: REFOSC.OSC.outFreq, value: 32 MHz, enabled: true}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
void BOARD_BootClockRUN(void)
{
const sim_clock_config_t simConfig = {
.er32kSrc = 0U, .clkdiv1 = 0x00010000U,
};
BOARD_RfOscInit();
CLOCK_SetSimSafeDivs();
BOARD_InitOsc0();
CLOCK_BootToFeeMode(kMCG_OscselOsc, 5U, kMCG_Dmx32Default, kMCG_DrsMid, CLOCK_SYS_FllStableDelay);
CLOCK_SetInternalRefClkConfig(kMCG_IrclkEnable, kMCG_IrcSlow, 0U);
CLOCK_SetSimConfig(&simConfig);
SystemCoreClock = 40000000U;
}
void BOARD_RfOscInit(void)
{
uint32_t temp, tempTrim;
uint8_t revId;
/* Obtain REV ID from SIM */
temp = SIM->SDID;
revId = (uint8_t)((temp & SIM_SDID_REVID_MASK) >> SIM_SDID_REVID_SHIFT);
if(0 == revId)
{
tempTrim = RSIM->ANA_TRIM;
RSIM->ANA_TRIM |= RSIM_ANA_TRIM_BB_LDO_XO_TRIM_MASK; /* Set max trim for BB LDO for XO */
}/* Workaround for Rev 1.0 XTAL startup and ADC analog diagnostics circuitry */
/* Turn on clocks for the XCVR */
/* Enable RF OSC in RSIM and wait for ready */
temp = RSIM->CONTROL;
temp &= ~RSIM_CONTROL_RF_OSC_EN_MASK;
RSIM->CONTROL = temp | RSIM_CONTROL_RF_OSC_EN(1);
/* ERR010224 */
RSIM->RF_OSC_CTRL |= RSIM_RF_OSC_CTRL_RADIO_EXT_OSC_OVRD_EN_MASK; /* Prevent XTAL_OUT_EN from generating XTAL_OUT request */
while((RSIM->CONTROL & RSIM_CONTROL_RF_OSC_READY_MASK) == 0); /* Wait for RF_OSC_READY */
if(0 == revId)
{
SIM->SCGC5 |= SIM_SCGC5_PHYDIG_MASK;
XCVR_TSM->OVRD0 |= XCVR_TSM_OVRD0_BB_LDO_ADCDAC_EN_OVRD_EN_MASK | XCVR_TSM_OVRD0_BB_LDO_ADCDAC_EN_OVRD_MASK; /* Force ADC DAC LDO on to prevent BGAP failure */
RSIM->ANA_TRIM = tempTrim; /* Reset LDO trim settings */
}/* Workaround for Rev 1.0 XTAL startup and ADC analog diagnostics circuitry */
}
void BOARD_InitOsc0(void)
{
const osc_config_t oscConfig = {
.freq = BOARD_XTAL0_CLK_HZ, .workMode = kOSC_ModeExt,
};
CLOCK_InitOsc0(&oscConfig);
/* Passing the XTAL0 frequency to clock driver. */
CLOCK_SetXtal0Freq(BOARD_XTAL0_CLK_HZ);
}
