/**************************************************************************************
** Main device loop. We check for capture progress here
***************************************************************************************/
void RadioSim::TimerHit()
{
long timeleft;
if (isConnected() == false)
return; // No need to reset timer if we are not connected anymore
if (InCapture)
{
timeleft = CalcTimeLeft();
if(timeleft < 0.1)
{
/* We're done capturing */
LOG_INFO("Capture done, downloading data...");
grabData();
InCapture = false;
timeleft = 0.0;
}
// This is an over simplified timing method, check DetectorSimulator and rtlsdrDetector for better timing checks
PrimaryDetector.setCaptureLeft(timeleft);
}
double value = (DetectorCoordsN[0].value + (360.0 / SIDEREAL_DAY) * POLLMS / 1000.0);
if (value >= FOV_DEG)
value -= FOV_DEG;
Ra = value;
DetectorCoordsN[0].value = Ra;
IDSetNumber(&DetectorCoordsNP, nullptr);
SetTimer(POLLMS);
return;
}
/**************************************************************************************
** Main device loop. We check for exposure progress
***************************************************************************************/
void FFMVCCD::TimerHit()
{
long timeleft;
if(isConnected() == false) {
return; // No need to reset timer if we are not connected anymore
}
if (InExposure) {
timeleft=CalcTimeLeft();
// Less than a 0.1 second away from exposure completion
// This is an over simplified timing method, check CCDSimulator and ffmvCCD for better timing checks
if (timeleft < 0.1) {
/* We're done exposing */
IDMessage(getDeviceName(), "Exposure done, downloading image...");
// Set exposure left to zero
PrimaryCCD.setExposureLeft(0);
// We're no longer exposing...
InExposure = false;
/* grab and save image */
grabImage();
} else {
// Just update time left in client
PrimaryCCD.setExposureLeft(timeleft);
}
}
SetTimer(POLLMS);
return;
}
bool RollOff::getFullClosedLimitSwitch()
{
double timeleft = CalcTimeLeft(MotionStart);
if (timeleft <= 0)
{
fullClosedLimitSwitch = ISS_ON;
return true;
}
else
return false;
}
void FocusMaster::TimerHit()
{
if (!isConnected())
return;
//uint32_t currentTicks = 0;
if (FocusTimerNP.s == IPS_BUSY)
{
float remaining = CalcTimeLeft(focusMoveStart, focusMoveRequest);
if (remaining <= 0)
{
FocusTimerNP.s = IPS_OK;
FocusTimerN[0].value = 0;
AbortFocuser();
}
else
FocusTimerN[0].value = remaining * 1000.0;
IDSetNumber(&FocusTimerNP, nullptr);
}
#if 0
bool rc = getPosition(¤tTicks);
if (rc)
FocusAbsPosN[0].value = currentTicks;
if (FocusAbsPosNP.s == IPS_BUSY || FocusRelPosNP.s == IPS_BUSY)
{
if (targetPosition == FocusAbsPosN[0].value)
{
if (FocusRelPosNP.s == IPS_BUSY)
{
FocusRelPosNP.s = IPS_OK;
IDSetNumber(&FocusRelPosNP, nullptr);
}
FocusAbsPosNP.s = IPS_OK;
LOG_DEBUG("Focuser reached target position.");
}
}
IDSetNumber(&FocusAbsPosNP, nullptr);
#endif
SetTimer(POLLMS);
}
/*******************************************************************************
** Main device loop. We check for exposure progress
*******************************************************************************/
void DSICCD::TimerHit()
{
long timeleft;
if(isConnected() == false) {
return; // No need to reset timer if we are not connected anymore
}
if (InExposure) {
timeleft=CalcTimeLeft();
/* Exposure control has been changed to ensure stable operation
for short exposures as well as for long exposures (gs) */
if (!dsi->ExposureInProgress())
{
/* We're done exposing */
DEBUG(INDI::Logger::DBG_SESSION,
"Exposure done, downloading image...");
// Set exposure left to zero
PrimaryCCD.setExposureLeft(0);
// We're no longer exposing...
InExposure = false;
/* grab and save image */
grabImage();
/* update temperature as measured after exposure (gs)
Attention: no continous temperature update, we always diplay
temperature for last exposure (interesting for matching darks) */
if (dsi->hasTempSensor())
{
CCDTempN[0].value = dsi->ccdTemp();
IDSetNumber(&CCDTempNP, NULL);
}
}
else
{
// Just update time left in client
PrimaryCCD.setExposureLeft(timeleft);
}
}
SetTimer(POLLMS);
return;
}
/**************************************************************************************
** Main device loop. We check for capture progress here
***************************************************************************************/
void RadioSim::TimerHit()
{
long timeleft;
if (isConnected() == false)
return; // No need to reset timer if we are not connected anymore
if (InCapture)
{
timeleft = CalcTimeLeft();
if(timeleft < 0.1)
{
/* We're done capturing */
LOG_INFO("Capture done, downloading data...");
timeleft = 0.0;
grabData();
}
// This is an over simplified timing method, check DetectorSimulator and rtlsdrDetector for better timing checks
PrimaryDetector.setCaptureLeft(timeleft);
}
SetTimer(POLLMS);
return;
}
/**************************************************************************************
** Main device loop. We check for exposure and temperature progress here
***************************************************************************************/
void INovaCCD::TimerHit()
{
long timeleft;
if(isConnected() == false)
return; // No need to reset timer if we are not connected anymore
if (InExposure)
{
timeleft = CalcTimeLeft();
// Less than a 0.1 second away from exposure completion
// This is an over simplified timing method, check CCDSimulator and inova for better timing checks
if(timeleft >= 0.0)
{
// Just update time left in client
PrimaryCCD.setExposureLeft(timeleft);
}
else
{
/* We're done exposing */
LOG_INFO("Exposure done, downloading image...");
RawData = (unsigned char*)iNovaSDK_GrabFrame();
if(RawData != nullptr)
{
// We're no longer exposing...
InExposure = false;
grabImage();
}
}
}
SetTimer(POLLMS);
return;
}
void GPhotoCCD::TimerHit()
{
long timeleft=1e6;
int timerID=-1;
if (isConnected() == false)
return;
if (livePreviewSP.s == IPS_BUSY)
{
bool rc = capturePreview();
if (rc)
timerID = SetTimer(STREAMPOLLMS);
else
{
livePreviewSP.s = IPS_ALERT;
DEBUG(INDI::Logger::DBG_ERROR, "Error capturing preview.");
livePreviewS[0].s = ISS_OFF;
livePreviewS[1].s = ISS_ON;
IDSetSwitch(&livePreviewSP, NULL);
}
}
if (FocusTimerNP.s == IPS_BUSY)
{
char errMsg[MAXRBUF];
if ( gphoto_manual_focus(gphotodrv, focusSpeed, errMsg) != GP_OK)
{
DEBUGF(INDI::Logger::DBG_ERROR, "Focusing failed: %s", errMsg);
FocusTimerNP.s = IPS_ALERT;
FocusTimerN[0].value = 0 ;
}
else
{
FocusTimerN[0].value -= FOCUS_TIMER;
if (FocusTimerN[0].value <= 0)
{
FocusTimerN[0].value = 0;
FocusTimerNP.s = IPS_OK;
}
else if (timerID == -1)
timerID = SetTimer(FOCUS_TIMER);
}
IDSetNumber(&FocusTimerNP, NULL);
}
if (InExposure)
{
timeleft = CalcTimeLeft();
if (timeleft < 1.0)
{
if (timeleft > 0.25 && timerID == -1)
{
// a quarter of a second or more
// just set a tighter timer
timerID = SetTimer(250);
}
else
{
if (timeleft > 0.07 && timerID == -1)
{
// use an even tighter timer
timerID = SetTimer(50);
}
else
{
// it's real close now, so spin on it
while (!sim && timeleft > 0)
{
int slv;
slv = 100000 * timeleft;
usleep(slv);
}
PrimaryCCD.setExposureLeft(0);
InExposure = false;
/* grab and save image */
bool rc = grabImage();
if (rc == false)
{
PrimaryCCD.setExposureFailed();
}
}
}
}
else
{
DEBUGF(INDI::Logger::DBG_DEBUG, "Capture in progress. Time left %ld", timeleft);
if (timerID == -1)
SetTimer(POLLMS);
}
PrimaryCCD.setExposureLeft(timeleft);
}
}
void QSICCD::TimerHit()
{
long timeleft;
double ccdTemp;
double coolerPower;
if(isConnected() == false)
return; // No need to reset timer if we are not connected anymore
if (InExposure)
{
bool imageReady;
timeleft=CalcTimeLeft(ExpStart, ExposureRequest);
if (timeleft < 1)
{
QSICam.get_ImageReady(&imageReady);
while (!imageReady)
{
usleep(100);
QSICam.get_ImageReady(&imageReady);
}
/* We're done exposing */
DEBUG(INDI::Logger::DBG_SESSION, "Exposure done, downloading image...");
PrimaryCCD.setExposureLeft(0);
InExposure = false;
/* grab and save image */
grabImage();
}
else
{
DEBUGF(INDI::Logger::DBG_DEBUG, "Image not ready, time left %ld\n", timeleft);
PrimaryCCD.setExposureLeft(timeleft);
}
}
switch (TemperatureNP.s)
{
case IPS_IDLE:
case IPS_OK:
try
{
QSICam.get_CCDTemperature(&ccdTemp);
} catch (std::runtime_error err)
{
TemperatureNP.s = IPS_IDLE;
DEBUGF(INDI::Logger::DBG_ERROR, "get_CCDTemperature() failed. %s.", err.what());
IDSetNumber(&TemperatureNP, NULL);
return;
}
if (fabs(TemperatureN[0].value - ccdTemp) >= TEMP_THRESHOLD)
{
TemperatureN[0].value = ccdTemp;
IDSetNumber(&TemperatureNP, NULL);
}
break;
case IPS_BUSY:
try
{
QSICam.get_CCDTemperature(&TemperatureN[0].value);
} catch (std::runtime_error err)
{
TemperatureNP.s = IPS_ALERT;
DEBUGF(INDI::Logger::DBG_ERROR, "get_CCDTemperature() failed. %s.", err.what());
IDSetNumber(&TemperatureNP, NULL);
return;
}
if (fabs(TemperatureN[0].value - targetTemperature) <= TEMP_THRESHOLD)
TemperatureNP.s = IPS_OK;
IDSetNumber(&TemperatureNP, NULL);
break;
case IPS_ALERT:
break;
}
switch (CoolerNP.s)
{
case IPS_IDLE:
case IPS_OK:
try
{
QSICam.get_CoolerPower(&coolerPower);
} catch (std::runtime_error err)
{
CoolerNP.s = IPS_IDLE;
DEBUGF(INDI::Logger::DBG_ERROR, "get_CoolerPower() failed. %s.", err.what());
IDSetNumber(&CoolerNP, NULL);
return;
}
if (CoolerN[0].value != coolerPower)
{
CoolerN[0].value = coolerPower;
IDSetNumber(&CoolerNP, NULL);
}
if (coolerPower > 0)
CoolerNP.s = IPS_BUSY;
break;
case IPS_BUSY:
try
{
QSICam.get_CoolerPower(&coolerPower);
} catch (std::runtime_error err)
{
CoolerNP.s = IPS_ALERT;
DEBUGF(INDI::Logger::DBG_ERROR, "get_CoolerPower() failed. %s.", err.what());
IDSetNumber(&CoolerNP, NULL);
return;
}
if (coolerPower == 0)
CoolerNP.s = IPS_IDLE;
CoolerN[0].value = coolerPower;
IDSetNumber(&CoolerNP, NULL);
break;
case IPS_ALERT:
break;
}
SetTimer(POLLMS);
return;
}
void FishCampCCD::TimerHit()
{
int timerHitID = -1, state = -1, rc = -1;
float timeleft;
double ccdTemp;
if (!isConnected())
return; // No need to reset timer if we are not connected anymore
if (InExposure)
{
timeleft = CalcTimeLeft();
if (timeleft < 1.0)
{
if (timeleft > 0.25)
{
// a quarter of a second or more
// just set a tighter timer
timerHitID = SetTimer(250);
}
else
{
if (timeleft > 0.07)
{
// use an even tighter timer
timerHitID = SetTimer(50);
}
else
{
// it's real close now, so spin on it
// We have to wait till the camera is ready to download
bool ready = false;
int slv;
slv = fabs(100000 * timeleft); //0.05s (50000 us) is checked every 5000 us or so
while (!sim && !ready)
{
state = fcUsb_cmd_getState(cameraNum);
if (state == 0)
ready = true;
else
usleep(slv);
}
/* We're done exposing */
LOG_DEBUG("Exposure done, downloading image...");
PrimaryCCD.setExposureLeft(0);
InExposure = false;
/* grab and save image */
grabImage();
}
}
}
else
{
LOGF_DEBUG("Image not yet ready. With time left %ld\n", timeleft);
PrimaryCCD.setExposureLeft(timeleft);
}
}
switch (TemperatureNP.s)
{
case IPS_IDLE:
case IPS_OK:
rc = fcUsb_cmd_getTemperature(cameraNum);
LOGF_DEBUG("fcUsb_cmd_getTemperature returns %d", rc);
ccdTemp = rc / 100.0;
LOGF_DEBUG("Temperature %g", ccdTemp);
if (fabs(TemperatureN[0].value - ccdTemp) >= TEMP_THRESHOLD)
{
TemperatureN[0].value = ccdTemp;
IDSetNumber(&TemperatureNP, nullptr);
}
break;
case IPS_BUSY:
if (sim)
{
TemperatureN[0].value = TemperatureRequest;
}
else
{
rc = fcUsb_cmd_getTemperature(cameraNum);
LOGF_DEBUG("fcUsb_cmd_getTemperature returns %d", rc);
TemperatureN[0].value = rc / 100.0;
}
// If we're within threshold, let's make it BUSY ---> OK
if (fabs(TemperatureRequest - TemperatureN[0].value) <= TEMP_THRESHOLD)
TemperatureNP.s = IPS_OK;
IDSetNumber(&TemperatureNP, nullptr);
break;
case IPS_ALERT:
break;
}
switch (CoolerNP.s)
{
case IPS_OK:
CoolerN[0].value = fcUsb_cmd_getTECPowerLevel(cameraNum);
IDSetNumber(&CoolerNP, nullptr);
LOGF_DEBUG("Cooler power level %g %", CoolerN[0].value);
break;
default:
break;
}
if (timerHitID == -1)
SetTimer(POLLMS);
return;
}
/**************************************************************************************
** Main device loop. We check for exposure and temperature progress here
***************************************************************************************/
void SimpleDetector::TimerHit()
{
long timeleft;
if (!isConnected())
return; // No need to reset timer if we are not connected anymore
if (InCapture)
{
timeleft = CalcTimeLeft();
// Less than a 0.1 second away from exposure completion
// This is an over simplified timing method, check DetectorSimulator and simpleDetector for better timing checks
if (timeleft < 0.1)
{
/* We're done exposing */
IDMessage(getDeviceName(), "Capture done, downloading image...");
// Set exposure left to zero
PrimaryDetector.setCaptureLeft(0);
// We're no longer exposing...
InCapture = false;
/* grab and save image */
grabFrame();
}
else
// Just update time left in client
PrimaryDetector.setCaptureLeft(timeleft);
}
// TemperatureNP is defined in INDI::Detector
switch (TemperatureNP.s)
{
case IPS_IDLE:
case IPS_OK:
break;
case IPS_BUSY:
/* If target temperature is higher, then increase current Detector temperature */
if (currentDetectorTemperature < TemperatureRequest)
currentDetectorTemperature++;
/* If target temperature is lower, then decrese current Detector temperature */
else if (currentDetectorTemperature > TemperatureRequest)
currentDetectorTemperature--;
/* If they're equal, stop updating */
else
{
TemperatureNP.s = IPS_OK;
IDSetNumber(&TemperatureNP, "Target temperature reached.");
break;
}
IDSetNumber(&TemperatureNP, nullptr);
break;
case IPS_ALERT:
break;
}
SetTimer(POLLMS);
}
void CCDSim::TimerHit()
{
int nexttimer=1000;
if(isConnected() == false) return; // No need to reset timer if we are not connected anymore
if(InExposure)
{
if (AbortPrimaryFrame)
{
InExposure = false;
AbortPrimaryFrame = false;
}
else
{
float timeleft;
timeleft=CalcTimeLeft(ExpStart,ExposureRequest);
//IDLog("CCD Exposure left: %g - Requset: %g\n", timeleft, ExposureRequest);
if (timeleft < 0)
timeleft = 0;
PrimaryCCD.setExposureLeft(timeleft);
if(timeleft < 1.0)
{
if(timeleft <= 0.001)
{
InExposure=false;
ExposureComplete(&PrimaryCCD);
} else
{
nexttimer=timeleft*1000; // set a shorter timer
}
}
}
}
if(InGuideExposure)
{
float timeleft;
timeleft=CalcTimeLeft(GuideExpStart,GuideExposureRequest);
//IDLog("GUIDE Exposure left: %g - Requset: %g\n", timeleft, GuideExposureRequest);
if (timeleft < 0)
timeleft = 0;
//ImageExposureN[0].value = timeleft;
//IDSetNumber(ImageExposureNP, NULL);
GuideCCD.setExposureLeft(timeleft);
if(timeleft < 1.0)
{
if(timeleft <= 0.001)
{
InGuideExposure=false;
if(!AbortGuideFrame)
{
//IDLog("Sending guider frame\n");
ExposureComplete(&GuideCCD);
if(InGuideExposure)
{ // the call to complete triggered another exposure
timeleft=CalcTimeLeft(GuideExpStart,GuideExposureRequest);
if(timeleft <1.0)
{
nexttimer=timeleft*1000;
}
}
} else
{
IDLog("Not sending guide frame cuz of abort\n");
}
AbortGuideFrame=false;
} else
{
nexttimer=timeleft*1000; // set a shorter timer
}
}
}
SetTimer(nexttimer);
return;
}
void FishCampCCD::TimerHit()
{
int timerHitID = -1, state = -1, rc = -1;
long timeleft;
double ccdTemp;
if (isConnected() == false)
return; // No need to reset timer if we are not connected anymore
if (InExposure)
{
timeleft = CalcTimeLeft();
if (timeleft < 1.0)
{
if (timeleft > 0.25)
{
// a quarter of a second or more
// just set a tighter timer
timerHitID = SetTimer(250);
}
else
{
if (timeleft > 0.07)
{
// use an even tighter timer
timerHitID = SetTimer(50);
}
else
{
// it's real close now, so spin on it
while (!sim && timeleft > 0)
{
state = fcUsb_cmd_getState(cameraNum);
if (state == 0)
timeleft = 0;
int slv;
slv = 100000 * timeleft;
usleep(slv);
}
/* We're done exposing */
DEBUG(INDI::Logger::DBG_DEBUG, "Exposure done, downloading image...");
PrimaryCCD.setExposureLeft(0);
InExposure = false;
/* grab and save image */
grabImage();
}
}
}
else
{
DEBUGF(INDI::Logger::DBG_DEBUG, "Image not yet ready. With time left %ld\n", timeleft);
}
PrimaryCCD.setExposureLeft(timeleft);
}
switch (TemperatureNP.s)
{
case IPS_IDLE:
case IPS_OK:
rc = fcUsb_cmd_getTemperature(cameraNum);
DEBUGF(INDI::Logger::DBG_DEBUG, "fcUsb_cmd_getTemperature returns %d", rc);
ccdTemp = rc / 100.0;
DEBUGF(INDI::Logger::DBG_DEBUG, "Temperature %g", ccdTemp);
if (fabs(TemperatureN[0].value - ccdTemp) >= TEMP_THRESHOLD)
{
TemperatureN[0].value = ccdTemp;
IDSetNumber(&TemperatureNP, NULL);
}
break;
case IPS_BUSY:
if (sim)
{
TemperatureN[0].value = TemperatureRequest;
}
else
{
rc = fcUsb_cmd_getTemperature(cameraNum);
DEBUGF(INDI::Logger::DBG_DEBUG, "fcUsb_cmd_getTemperature returns %d", rc);
TemperatureN[0].value = rc / 100.0;
}
// If we're within threshold, let's make it BUSY ---> OK
if (fabs(TemperatureRequest - TemperatureN[0].value) <= TEMP_THRESHOLD)
TemperatureNP.s = IPS_OK;
IDSetNumber(&TemperatureNP, NULL);
break;
case IPS_ALERT:
break;
}
switch (CoolerNP.s)
{
case IPS_OK:
CoolerN[0].value = fcUsb_cmd_getTECPowerLevel(cameraNum);
IDSetNumber(&CoolerNP, NULL);
DEBUGF(INDI::Logger::DBG_DEBUG, "Cooler power level %g %", CoolerN[0].value);
break;
default:
break;
}
if (timerHitID == -1)
SetTimer(POLLMS);
return;
}