static void CopyParamCallback(void * context, const char *ParamName, m64p_type ParamType)
{
SCopySection *pCpyContext = (SCopySection *) context;
int paramInt;
float paramFloat;
char paramString[1024];
// handle the parameter copy depending upon type
switch (ParamType)
{
case M64TYPE_INT:
case M64TYPE_BOOL:
if (ConfigGetParameter(pCpyContext->pSrc, ParamName, ParamType, ¶mInt, sizeof(int)) == M64ERR_SUCCESS)
ConfigSetParameter(pCpyContext->pDst, ParamName, ParamType, ¶mInt);
break;
case M64TYPE_FLOAT:
if (ConfigGetParameter(pCpyContext->pSrc, ParamName, ParamType, ¶mFloat, sizeof(float)) == M64ERR_SUCCESS)
ConfigSetParameter(pCpyContext->pDst, ParamName, ParamType, ¶mFloat);
break;
case M64TYPE_STRING:
if (ConfigGetParameter(pCpyContext->pSrc, ParamName, ParamType, paramString, 1024) == M64ERR_SUCCESS)
ConfigSetParameter(pCpyContext->pDst, ParamName, ParamType, paramString);
break;
default:
// this should never happen
DebugMessage(M64MSG_ERROR, "Unknown source parameter type %i in copy callback", (int) ParamType);
return;
}
}
int main_set_core_defaults(void)
{
float fConfigParamsVersion;
int bSaveConfig = 0, bUpgrade = 0;
if (ConfigGetParameter(g_CoreConfig, "Version", M64TYPE_FLOAT, &fConfigParamsVersion, sizeof(float)) != M64ERR_SUCCESS)
{
DebugMessage(M64MSG_WARNING, "No version number in 'Core' config section. Setting defaults.");
ConfigDeleteSection("Core");
ConfigOpenSection("Core", &g_CoreConfig);
bSaveConfig = 1;
}
else if (((int) fConfigParamsVersion) != ((int) CONFIG_PARAM_VERSION))
{
DebugMessage(M64MSG_WARNING, "Incompatible version %.2f in 'Core' config section: current is %.2f. Setting defaults.", fConfigParamsVersion, (float) CONFIG_PARAM_VERSION);
ConfigDeleteSection("Core");
ConfigOpenSection("Core", &g_CoreConfig);
bSaveConfig = 1;
}
else if ((CONFIG_PARAM_VERSION - fConfigParamsVersion) >= 0.0001f)
{
float fVersion = (float) CONFIG_PARAM_VERSION;
ConfigSetParameter(g_CoreConfig, "Version", M64TYPE_FLOAT, &fVersion);
DebugMessage(M64MSG_INFO, "Updating parameter set version in 'Core' config section to %.2f", fVersion);
bUpgrade = 1;
bSaveConfig = 1;
}
/* parameters controlling the operation of the core */
ConfigSetDefaultFloat(g_CoreConfig, "Version", (float) CONFIG_PARAM_VERSION, "Mupen64Plus Core config parameter set version number. Please don't change this version number.");
ConfigSetDefaultBool(g_CoreConfig, "OnScreenDisplay", 1, "Draw on-screen display if True, otherwise don't draw OSD");
#if defined(DYNAREC)
ConfigSetDefaultInt(g_CoreConfig, "R4300Emulator", 2, "Use Pure Interpreter if 0, Cached Interpreter if 1, or Dynamic Recompiler if 2 or more");
#else
ConfigSetDefaultInt(g_CoreConfig, "R4300Emulator", 1, "Use Pure Interpreter if 0, Cached Interpreter if 1, or Dynamic Recompiler if 2 or more");
#endif
ConfigSetDefaultBool(g_CoreConfig, "NoCompiledJump", 0, "Disable compiled jump commands in dynamic recompiler (should be set to False) ");
ConfigSetDefaultBool(g_CoreConfig, "DisableExtraMem", 0, "Disable 4MB expansion RAM pack. May be necessary for some games");
ConfigSetDefaultBool(g_CoreConfig, "EnableDebugger", 0, "Activate the R4300 debugger when ROM execution begins, if core was built with Debugger support");
ConfigSetDefaultInt(g_CoreConfig, "CountPerOp", 0, "Force number of cycles per emulated instruction.");
ConfigSetDefaultBool(g_CoreConfig, "DelaySI", 1, "Delay interrupt after DMA SI read/write");
if (bSaveConfig)
ConfigSaveSection("Core");
return 1;
}
static int load_controller_config(const char *SectionName, int i, int bIsAutoconfig)
{
m64p_handle pConfig;
char input_str[256], value1_str[16], value2_str[16];
const char *config_ptr;
int j;
/* Open the configuration section for this controller */
if (ConfigOpenSection(SectionName, &pConfig) != M64ERR_SUCCESS)
{
DebugMessage(M64MSG_ERROR, "Couldn't open config section '%s'", SectionName);
return 0;
}
/* Check version number, and if it doesn't match: delete the config section and return with error */
if (!bIsAutoconfig)
{
float fVersion = 0.0f;
if (ConfigGetParameter(pConfig, "version", M64TYPE_FLOAT, &fVersion, sizeof(float)) != M64ERR_SUCCESS)
{
ConfigDeleteSection(SectionName);
return -1;
}
if (((int) fVersion) != ((int) CONFIG_VERSION))
{
DebugMessage(M64MSG_WARNING, "Incompatible version %.2f in config section '%s': current is %.2f. Clearing.", fVersion, SectionName, (float) CONFIG_VERSION);
ConfigDeleteSection(SectionName);
return -1;
}
}
/* check for the required parameters */
if (ConfigGetParameter(pConfig, "plugged", M64TYPE_BOOL, &controller[i].control->Present, sizeof(int)) != M64ERR_SUCCESS)
return -1;
if (ConfigGetParameter(pConfig, "plugin", M64TYPE_INT, &controller[i].control->Plugin, sizeof(int)) != M64ERR_SUCCESS)
return -1;
if (ConfigGetParameter(pConfig, "device", M64TYPE_INT, &controller[i].device, sizeof(int)) != M64ERR_SUCCESS)
return -1;
/* Name validation only applies to stored configurations (not auto-configs) */
if (!bIsAutoconfig)
{
char device_name[256];
if (ConfigGetParameter(pConfig, "name", M64TYPE_STRING, device_name, 256) != M64ERR_SUCCESS)
device_name[0] = 0;
if (controller[i].device == DEVICE_NOT_JOYSTICK)
{
/* do not load automatically generated keyboard config that was stored to disk (prefer any joysticks attached) */
if (strcmp(device_name, "AutoKeyboard") == 0)
return -2;
}
else if (controller[i].device >= 0 && device_name[0] != 0)
{
/* check that the SDL device name matches the name stored in the config section */
const char *sdl_name = get_sdl_joystick_name(controller[i].device);
if (sdl_name == NULL || strncmp(device_name, sdl_name, 255) != 0)
{
DebugMessage(M64MSG_WARNING, "N64 Controller #%i: SDL joystick name '%s' doesn't match stored configuration name '%s'", i + 1, sdl_name, device_name);
return -3;
}
}
}
/* then do the optional parameters */
ConfigGetParameter(pConfig, "mouse", M64TYPE_BOOL, &controller[i].mouse, sizeof(int));
if (ConfigGetParameter(pConfig, "MouseSensitivity", M64TYPE_STRING, input_str, 256) == M64ERR_SUCCESS)
{
if (sscanf(input_str, "%f,%f", &controller[i].mouse_sens[0], &controller[i].mouse_sens[1]) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in MouseSensitivity parameter for controller %i", i + 1);
}
if (ConfigGetParameter(pConfig, "AnalogDeadzone", M64TYPE_STRING, input_str, 256) == M64ERR_SUCCESS)
{
if (sscanf(input_str, "%i,%i", &controller[i].axis_deadzone[0], &controller[i].axis_deadzone[1]) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in AnalogDeadzone parameter for controller %i", i + 1);
}
if (ConfigGetParameter(pConfig, "AnalogPeak", M64TYPE_STRING, input_str, 256) == M64ERR_SUCCESS)
{
if (sscanf(input_str, "%i,%i", &controller[i].axis_peak[0], &controller[i].axis_peak[1]) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in AnalogPeak parameter for controller %i", i + 1);
}
/* load configuration for all the digital buttons */
for (j = 0; j < X_AXIS; j++)
{
if (ConfigGetParameter(pConfig, button_names[j], M64TYPE_STRING, input_str, 256) != M64ERR_SUCCESS)
{
DebugMessage(M64MSG_WARNING, "missing config key '%s' for controller %i button %i", button_names[j], i+1, j);
continue;
}
if ((config_ptr = strstr(input_str, "key")) != NULL)
if (sscanf(config_ptr, "key(%i)", (int *) &controller[i].button[j].key) != 1)
DebugMessage(M64MSG_WARNING, "parsing error in key() parameter of button '%s' for controller %i", button_names[j], i + 1);
if ((config_ptr = strstr(input_str, "button")) != NULL)
if (sscanf(config_ptr, "button(%i)", &controller[i].button[j].button) != 1)
DebugMessage(M64MSG_WARNING, "parsing error in button() parameter of button '%s' for controller %i", button_names[j], i + 1);
if ((config_ptr = strstr(input_str, "axis")) != NULL)
{
char chAxisDir;
if (sscanf(config_ptr, "axis(%d%c,%d", &controller[i].button[j].axis, &chAxisDir, &controller[i].button[j].axis_deadzone) != 3 &&
sscanf(config_ptr, "axis(%i%c", &controller[i].button[j].axis, &chAxisDir) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in axis() parameter of button '%s' for controller %i", button_names[j], i + 1);
controller[i].button[j].axis_dir = (chAxisDir == '+' ? 1 : (chAxisDir == '-' ? -1 : 0));
}
if ((config_ptr = strstr(input_str, "hat")) != NULL)
{
char *lastchar = NULL;
if (sscanf(config_ptr, "hat(%i %15s", &controller[i].button[j].hat, value1_str) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in hat() parameter of button '%s' for controller %i", button_names[j], i + 1);
value1_str[15] = 0;
/* chop off the last character of value1_str if it is the closing parenthesis */
lastchar = &value1_str[strlen(value1_str) - 1];
if (lastchar > value1_str && *lastchar == ')') *lastchar = 0;
controller[i].button[j].hat_pos = get_hat_pos_by_name(value1_str);
}
if ((config_ptr = strstr(input_str, "mouse")) != NULL)
if (sscanf(config_ptr, "mouse(%i)", &controller[i].button[j].mouse) != 1)
DebugMessage(M64MSG_WARNING, "parsing error in mouse() parameter of button '%s' for controller %i", button_names[j], i + 1);
}
/* load configuration for the 2 analog joystick axes */
for (j = X_AXIS; j <= Y_AXIS; j++)
{
int axis_idx = j - X_AXIS;
if (ConfigGetParameter(pConfig, button_names[j], M64TYPE_STRING, input_str, 256) != M64ERR_SUCCESS)
{
DebugMessage(M64MSG_WARNING, "missing config key '%s' for controller %i axis %i", button_names[j], i+1, axis_idx);
continue;
}
if ((config_ptr = strstr(input_str, "key")) != NULL)
if (sscanf(config_ptr, "key(%i,%i)", (int *) &controller[i].axis[axis_idx].key_a, (int *) &controller[i].axis[axis_idx].key_b) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in key() parameter of axis '%s' for controller %i", button_names[j], i + 1);
if ((config_ptr = strstr(input_str, "button")) != NULL)
if (sscanf(config_ptr, "button(%i,%i)", &controller[i].axis[axis_idx].button_a, &controller[i].axis[axis_idx].button_b) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in button() parameter of axis '%s' for controller %i", button_names[j], i + 1);
if ((config_ptr = strstr(input_str, "axis")) != NULL)
{
char chAxisDir1, chAxisDir2;
if (sscanf(config_ptr, "axis(%i%c,%i%c)", &controller[i].axis[axis_idx].axis_a, &chAxisDir1,
&controller[i].axis[axis_idx].axis_b, &chAxisDir2) != 4)
DebugMessage(M64MSG_WARNING, "parsing error in axis() parameter of axis '%s' for controller %i", button_names[j], i + 1);
controller[i].axis[axis_idx].axis_dir_a = (chAxisDir1 == '+' ? 1 : (chAxisDir1 == '-' ? -1 : 0));
controller[i].axis[axis_idx].axis_dir_b = (chAxisDir2 == '+' ? 1 : (chAxisDir2 == '-' ? -1 : 0));
}
if ((config_ptr = strstr(input_str, "hat")) != NULL)
{
char *lastchar = NULL;
if (sscanf(config_ptr, "hat(%i %15s %15s", &controller[i].axis[axis_idx].hat, value1_str, value2_str) != 3)
DebugMessage(M64MSG_WARNING, "parsing error in hat() parameter of axis '%s' for controller %i", button_names[j], i + 1);
value1_str[15] = value2_str[15] = 0;
/* chop off the last character of value2_str if it is the closing parenthesis */
lastchar = &value2_str[strlen(value2_str) - 1];
if (lastchar > value2_str && *lastchar == ')') *lastchar = 0;
controller[i].axis[axis_idx].hat_pos_a = get_hat_pos_by_name(value1_str);
controller[i].axis[axis_idx].hat_pos_b = get_hat_pos_by_name(value2_str);
}
}
return 1;
}
int event_set_core_defaults(void)
{
float fConfigParamsVersion;
int bSaveConfig = 0;
if (ConfigOpenSection("CoreEvents", &l_CoreEventsConfig) != M64ERR_SUCCESS || l_CoreEventsConfig == NULL)
{
DebugMessage(M64MSG_ERROR, "Failed to open CoreEvents config section.");
return 0; /* fail */
}
if (ConfigGetParameter(l_CoreEventsConfig, "Version", M64TYPE_FLOAT, &fConfigParamsVersion, sizeof(float)) != M64ERR_SUCCESS)
{
DebugMessage(M64MSG_WARNING, "No version number in 'CoreEvents' config section. Setting defaults.");
ConfigDeleteSection("CoreEvents");
ConfigOpenSection("CoreEvents", &l_CoreEventsConfig);
bSaveConfig = 1;
}
else if (((int) fConfigParamsVersion) != ((int) CONFIG_PARAM_VERSION))
{
DebugMessage(M64MSG_WARNING, "Incompatible version %.2f in 'CoreEvents' config section: current is %.2f. Setting defaults.", fConfigParamsVersion, (float) CONFIG_PARAM_VERSION);
ConfigDeleteSection("CoreEvents");
ConfigOpenSection("CoreEvents", &l_CoreEventsConfig);
bSaveConfig = 1;
}
else if ((CONFIG_PARAM_VERSION - fConfigParamsVersion) >= 0.0001f)
{
/* handle upgrades */
float fVersion = CONFIG_PARAM_VERSION;
ConfigSetParameter(l_CoreEventsConfig, "Version", M64TYPE_FLOAT, &fVersion);
DebugMessage(M64MSG_INFO, "Updating parameter set version in 'CoreEvents' config section to %.2f", fVersion);
bSaveConfig = 1;
}
ConfigSetDefaultFloat(l_CoreEventsConfig, "Version", CONFIG_PARAM_VERSION, "Mupen64Plus CoreEvents config parameter set version number. Please don't change this version number.");
/* Keyboard presses mapped to core functions */
ConfigSetDefaultInt(l_CoreEventsConfig, kbdStop, sdl_native2keysym(SDL_SCANCODE_ESCAPE), "SDL keysym for stopping the emulator");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdFullscreen, sdl_native2keysym(SDL_NUM_SCANCODES), "SDL keysym for switching between fullscreen/windowed modes");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdSave, sdl_native2keysym(SDL_SCANCODE_F5), "SDL keysym for saving the emulator state");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdLoad, sdl_native2keysym(SDL_SCANCODE_F7), "SDL keysym for loading the emulator state");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdIncrement, sdl_native2keysym(SDL_SCANCODE_UNKNOWN), "SDL keysym for advancing the save state slot");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdReset, sdl_native2keysym(SDL_SCANCODE_F9), "SDL keysym for resetting the emulator");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdSpeeddown, sdl_native2keysym(SDL_SCANCODE_F10), "SDL keysym for slowing down the emulator");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdSpeedup, sdl_native2keysym(SDL_SCANCODE_F11), "SDL keysym for speeding up the emulator");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdScreenshot, sdl_native2keysym(SDL_SCANCODE_F12), "SDL keysym for taking a screenshot");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdPause, sdl_native2keysym(SDL_SCANCODE_P), "SDL keysym for pausing the emulator");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdMute, sdl_native2keysym(SDL_SCANCODE_M), "SDL keysym for muting/unmuting the sound");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdIncrease, sdl_native2keysym(SDL_SCANCODE_RIGHTBRACKET),"SDL keysym for increasing the volume");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdDecrease, sdl_native2keysym(SDL_SCANCODE_LEFTBRACKET), "SDL keysym for decreasing the volume");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdForward, sdl_native2keysym(SDL_SCANCODE_F), "SDL keysym for temporarily going really fast");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdAdvance, sdl_native2keysym(SDL_SCANCODE_SLASH), "SDL keysym for advancing by one frame when paused");
ConfigSetDefaultInt(l_CoreEventsConfig, kbdGameshark, sdl_native2keysym(SDL_SCANCODE_G), "SDL keysym for pressing the game shark button");
/* Joystick events mapped to core functions */
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joyStop], "", "Joystick event string for stopping the emulator");
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joyFullscreen], "", "Joystick event string for switching between fullscreen/windowed modes");
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joySave], "", "Joystick event string for saving the emulator state");
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joyLoad], "", "Joystick event string for loading the emulator state");
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joyIncrement], "", "Joystick event string for advancing the save state slot");
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joyScreenshot], "", "Joystick event string for taking a screenshot");
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joyPause], "", "Joystick event string for pausing the emulator");
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joyMute], "", "Joystick event string for muting/unmuting the sound");
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joyIncrease], "", "Joystick event string for increasing the volume");
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joyDecrease], "", "Joystick event string for decreasing the volume");
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joyForward], "", "Joystick event string for fast-forward");
ConfigSetDefaultString(l_CoreEventsConfig, JoyCmdName[joyGameshark], "", "Joystick event string for pressing the game shark button");
if (bSaveConfig)
ConfigSaveSection("CoreEvents");
return 1;
}
void load_configuration(int bPreConfig)
{
char SectionName[32];
int joy_plugged = 0;
int n64CtrlIdx, sdlCtrlIdx, j;
int sdlNumDevUsed = 0;
int sdlDevicesUsed[4];
eModeType OrigControlMode[4], ControlMode[4];
int ControlDevice[4];
char DeviceName[4][256];
int ActiveControllers = 0;
int sdlNumJoysticks = get_sdl_num_joysticks();
float fVersion = 0.0f;
const char *sdl_name;
int ControllersFound = 0;
/* tell user how many SDL joysticks are available */
if (!bPreConfig)
DebugMessage(M64MSG_INFO, "%i SDL joysticks were found.", sdlNumJoysticks);
/* loop through 4 N64 controllers, initializing and validating special section parameters */
for (n64CtrlIdx=0; n64CtrlIdx < 4; n64CtrlIdx++)
{
m64p_handle pConfig;
/* reset the controller configuration */
clear_controller(n64CtrlIdx);
/* Open the configuration section for this controller */
sprintf(SectionName, "Input-SDL-Control%i", n64CtrlIdx + 1);
if (ConfigOpenSection(SectionName, &pConfig) != M64ERR_SUCCESS)
{
// this should never happen
DebugMessage(M64MSG_ERROR, "Couldn't open config section '%s'. Aborting...", SectionName);
return;
}
/* Check version number, and if it doesn't match: delete the config section */
fVersion = 0.0f;
if (ConfigGetParameter(pConfig, "version", M64TYPE_FLOAT, &fVersion, sizeof(float)) != M64ERR_SUCCESS || ((int) fVersion) != ((int) CONFIG_VERSION))
{
DebugMessage(M64MSG_WARNING, "Missing or incompatible config section '%s'. Clearing.", SectionName);
ConfigDeleteSection(SectionName);
// set local controller default parameters
OrigControlMode[n64CtrlIdx] = ControlMode[n64CtrlIdx] = E_MODE_FULL_AUTO;
ControlDevice[n64CtrlIdx] = DEVICE_NO_JOYSTICK;
DeviceName[n64CtrlIdx][0] = 0;
// write blank config for GUI front-ends
init_controller_config(n64CtrlIdx, "", E_MODE_FULL_AUTO);
// save it to the file too
ConfigSaveSection(SectionName);
}
else
{
if (ConfigGetParameter(pConfig, "mode", M64TYPE_INT, &OrigControlMode[n64CtrlIdx], sizeof(int)) != M64ERR_SUCCESS ||
(int) OrigControlMode[n64CtrlIdx] < 0 || (int) OrigControlMode[n64CtrlIdx] > 2)
{
if (!bPreConfig)
DebugMessage(M64MSG_WARNING, "Missing or invalid 'mode' parameter in config section '%s'. Setting to 2 (Fully Auto)", SectionName);
OrigControlMode[n64CtrlIdx] = E_MODE_FULL_AUTO;
}
ControlMode[n64CtrlIdx] = OrigControlMode[n64CtrlIdx];
if (ConfigGetParameter(pConfig, "device", M64TYPE_INT, &ControlDevice[n64CtrlIdx], sizeof(int)) != M64ERR_SUCCESS)
{
if (!bPreConfig)
DebugMessage(M64MSG_WARNING, "Missing 'device' parameter in config section '%s'. Setting to -1 (No joystick)", SectionName);
ControlDevice[n64CtrlIdx] = DEVICE_NO_JOYSTICK;
}
if (ConfigGetParameter(pConfig, "name", M64TYPE_STRING, DeviceName[n64CtrlIdx], 256) != M64ERR_SUCCESS)
{
DeviceName[n64CtrlIdx][0] = 0;
}
}
}
/* loop through 4 N64 controllers and set up those in Fully Manual mode */
for (n64CtrlIdx=0; n64CtrlIdx < 4; n64CtrlIdx++)
{
if (ControlMode[n64CtrlIdx] != E_MODE_MANUAL)
continue;
/* load the stored configuration (disregard any errors) */
sprintf(SectionName, "Input-SDL-Control%i", n64CtrlIdx + 1);
load_controller_config(SectionName, n64CtrlIdx, ControlDevice[n64CtrlIdx]);
/* if this config uses an SDL joystick, mark it as used */
if (ControlDevice[n64CtrlIdx] == DEVICE_NO_JOYSTICK)
{
if (!bPreConfig)
DebugMessage(M64MSG_INFO, "N64 Controller #%i: Using manual config with no SDL joystick (keyboard/mouse only)", n64CtrlIdx+1);
}
else
{
sdlDevicesUsed[sdlNumDevUsed++] = ControlDevice[n64CtrlIdx];
if (!bPreConfig)
DebugMessage(M64MSG_INFO, "N64 Controller #%i: Using manual config for SDL joystick %i", n64CtrlIdx+1, ControlDevice[n64CtrlIdx]);
}
ActiveControllers++;
}
/* now loop through again, setting up those in Named Auto mode */
for (n64CtrlIdx=0; n64CtrlIdx < 4; n64CtrlIdx++)
{
if (ControlMode[n64CtrlIdx] != E_MODE_NAMED_AUTO)
continue;
/* if name is empty, then use full auto mode instead */
if (DeviceName[n64CtrlIdx][0] == 0)
{
ControlMode[n64CtrlIdx] = E_MODE_FULL_AUTO;
continue;
}
sprintf(SectionName, "Input-SDL-Control%i", n64CtrlIdx + 1);
/* if user is looking for a keyboard, set that up */
if (strcasecmp(DeviceName[n64CtrlIdx], "Keyboard") == 0)
{
auto_set_defaults(DEVICE_NO_JOYSTICK, "Keyboard");
if (load_controller_config("AutoConfig0", n64CtrlIdx, DEVICE_NO_JOYSTICK) > 0)
{
if (!bPreConfig)
DebugMessage(M64MSG_INFO, "N64 Controller #%i: Using auto-config for keyboard", n64CtrlIdx+1);
/* copy the auto-config settings to the controller config section */
auto_copy_inputconfig("AutoConfig0", SectionName, "Keyboard");
ActiveControllers++;
ConfigSaveSection(SectionName);
}
else
{
DebugMessage(M64MSG_ERROR, "Autoconfig keyboard setup invalid");
}
ConfigDeleteSection("AutoConfig0");
continue;
}
/* search for an unused SDL device with the matching name */
for (sdlCtrlIdx=0; sdlCtrlIdx < sdlNumJoysticks; sdlCtrlIdx++)
{
/* check if this one is in use */
int deviceAlreadyUsed = 0;
for (j = 0; j < sdlNumDevUsed; j++)
{
if (sdlDevicesUsed[j] == sdlCtrlIdx)
deviceAlreadyUsed = 1;
}
if (deviceAlreadyUsed)
continue;
/* check if the name matches */
sdl_name = get_sdl_joystick_name(sdlCtrlIdx);
if (sdl_name != NULL && strncmp(DeviceName[n64CtrlIdx], sdl_name, 255) == 0)
{
/* set up one or more controllers for this SDL device, if present in InputAutoConfig.ini */
int ControllersFound = setup_auto_controllers(bPreConfig, n64CtrlIdx, sdlCtrlIdx, sdl_name, ControlMode, OrigControlMode, DeviceName);
if (ControllersFound == 0)
{
// error: no auto-config found for this SDL device
DebugMessage(M64MSG_ERROR, "No auto-config found for joystick named '%s' in InputAutoConfig.ini", sdl_name);
// mark this device as being used just so we don't complain about it again
sdlDevicesUsed[sdlNumDevUsed++] = sdlCtrlIdx;
// quit looking for SDL joysticks which match the name, because there's no valid autoconfig for that name.
// this controller will be unused; skip to the next one
break;
}
/* mark this sdl device as used */
sdlDevicesUsed[sdlNumDevUsed++] = sdlCtrlIdx;
ActiveControllers += ControllersFound;
break;
}
}
/* if we didn't find a match for this joystick name, then set the controller to fully auto */
if (sdlCtrlIdx == sdlNumJoysticks)
{
if (!bPreConfig)
DebugMessage(M64MSG_WARNING, "N64 Controller #%i: No SDL joystick found matching name '%s'. Using full auto mode.", n64CtrlIdx+1, DeviceName[n64CtrlIdx]);
ControlMode[n64CtrlIdx] = E_MODE_FULL_AUTO;
}
}
/* Final loop through N64 controllers, setting up those in Full Auto mode */
for (n64CtrlIdx=0; n64CtrlIdx < 4; n64CtrlIdx++)
{
if (ControlMode[n64CtrlIdx] != E_MODE_FULL_AUTO)
continue;
sprintf(SectionName, "Input-SDL-Control%i", n64CtrlIdx + 1);
/* search for an unused SDL device */
for (sdlCtrlIdx=0; sdlCtrlIdx < sdlNumJoysticks; sdlCtrlIdx++)
{
/* check if this one is in use */
int deviceAlreadyUsed = 0;
for (j = 0; j < sdlNumDevUsed; j++)
{
if (sdlDevicesUsed[j] == sdlCtrlIdx)
deviceAlreadyUsed = 1;
}
if (deviceAlreadyUsed)
continue;
/* set up one or more controllers for this SDL device, if present in InputAutoConfig.ini */
sdl_name = get_sdl_joystick_name(sdlCtrlIdx);
ControllersFound = setup_auto_controllers(bPreConfig, n64CtrlIdx, sdlCtrlIdx, sdl_name, ControlMode, OrigControlMode, DeviceName);
if (!bPreConfig && ControllersFound == 0)
{
// error: no auto-config found for this SDL device
DebugMessage(M64MSG_ERROR, "No auto-config found for joystick named '%s' in InputAutoConfig.ini", sdl_name);
// mark this device as being used just so we don't complain about it again
sdlDevicesUsed[sdlNumDevUsed++] = sdlCtrlIdx;
// keep trying more SDL devices to see if we can auto-config one for this N64 controller
continue;
}
/* mark this sdl device as used */
sdlDevicesUsed[sdlNumDevUsed++] = sdlCtrlIdx;
ActiveControllers += ControllersFound;
break;
}
/* if this N64 controller was not activated, set device to -1 */
if (sdlCtrlIdx == sdlNumJoysticks)
{
m64p_handle section;
if (ConfigOpenSection(SectionName, §ion) == M64ERR_SUCCESS)
{
const int iNoDevice = -1;
ConfigSetParameter(section, "device", M64TYPE_INT, &iNoDevice);
if (OrigControlMode[n64CtrlIdx] == E_MODE_FULL_AUTO)
ConfigSetParameter(section, "name", M64TYPE_STRING, "");
ConfigSaveSection(SectionName);
}
}
}
/* fallback to keyboard if no controllers were configured */
if (ActiveControllers == 0)
{
if (!bPreConfig)
DebugMessage(M64MSG_INFO, "N64 Controller #1: Forcing default keyboard configuration");
auto_set_defaults(DEVICE_NO_JOYSTICK, "Keyboard");
if (load_controller_config("AutoConfig0", 0, DEVICE_NO_JOYSTICK) > 0)
{
/* copy the auto-config settings to the controller config section */
if (OrigControlMode[0] == E_MODE_FULL_AUTO)
auto_copy_inputconfig("AutoConfig0", "Input-SDL-Control1", "Keyboard");
else
auto_copy_inputconfig("AutoConfig0", "Input-SDL-Control1", NULL); // don't overwrite 'name' parameter
ActiveControllers++;
ConfigSaveSection("Input-SDL-Control1");
}
else
{
DebugMessage(M64MSG_ERROR, "Autoconfig keyboard setup invalid");
}
ConfigDeleteSection("AutoConfig0");
}
/* see how many joysticks are plugged in */
joy_plugged = 0;
for (j = 0; j < 4; j++)
{
if (controller[j].control->Present)
joy_plugged++;
}
/* print out summary info message */
if (!bPreConfig)
{
if (joy_plugged > 0)
{
DebugMessage(M64MSG_INFO, "%i controller(s) found, %i plugged in and usable in the emulator", ActiveControllers, joy_plugged);
}
else
{
if (ActiveControllers == 0)
DebugMessage(M64MSG_WARNING, "No joysticks/controllers found");
else
DebugMessage(M64MSG_WARNING, "%i controllers found, but none were 'plugged in'", ActiveControllers);
}
}
}
static int load_controller_config(const char *SectionName, int i, int sdlDeviceIdx)
{
m64p_handle pConfig;
char input_str[256], value1_str[NUM_BUTTONS], value2_str[NUM_BUTTONS];
const char *config_ptr;
int j;
/* Open the configuration section for this controller */
if (ConfigOpenSection(SectionName, &pConfig) != M64ERR_SUCCESS)
{
DebugMessage(M64MSG_ERROR, "Couldn't open config section '%s'", SectionName);
return 0;
}
/* set SDL device number */
controller[i].device = sdlDeviceIdx;
/* throw warnings if 'plugged' or 'plugin' are missing */
if (ConfigGetParameter(pConfig, "plugged", M64TYPE_BOOL, &controller[i].control->Present, sizeof(int)) != M64ERR_SUCCESS)
{
DebugMessage(M64MSG_WARNING, "missing 'plugged' parameter from config section %s. Setting to 1 (true).", SectionName);
controller[i].control->Present = 1;
}
if (ConfigGetParameter(pConfig, "plugin", M64TYPE_INT, &controller[i].control->Plugin, sizeof(int)) != M64ERR_SUCCESS)
{
DebugMessage(M64MSG_WARNING, "missing 'plugin' parameter from config section %s. Setting to 1 (none).", SectionName);
controller[i].control->Plugin = PLUGIN_NONE;
}
/* load optional parameters */
ConfigGetParameter(pConfig, "mouse", M64TYPE_BOOL, &controller[i].mouse, sizeof(int));
if (ConfigGetParameter(pConfig, "MouseSensitivity", M64TYPE_STRING, input_str, 256) == M64ERR_SUCCESS)
{
if (sscanf(input_str, "%f,%f", &controller[i].mouse_sens[0], &controller[i].mouse_sens[1]) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in MouseSensitivity parameter for controller %i", i + 1);
}
if (ConfigGetParameter(pConfig, "AnalogDeadzone", M64TYPE_STRING, input_str, 256) == M64ERR_SUCCESS)
{
if (sscanf(input_str, "%i,%i", &controller[i].axis_deadzone[0], &controller[i].axis_deadzone[1]) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in AnalogDeadzone parameter for controller %i", i + 1);
}
if (ConfigGetParameter(pConfig, "AnalogPeak", M64TYPE_STRING, input_str, 256) == M64ERR_SUCCESS)
{
if (sscanf(input_str, "%i,%i", &controller[i].axis_peak[0], &controller[i].axis_peak[1]) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in AnalogPeak parameter for controller %i", i + 1);
}
/* load configuration for all the digital buttons */
for (j = 0; j < X_AXIS; j++)
{
if (ConfigGetParameter(pConfig, button_names[j], M64TYPE_STRING, input_str, 256) != M64ERR_SUCCESS)
{
DebugMessage(M64MSG_WARNING, "missing config key '%s' for controller %i button %i", button_names[j], i+1, j);
continue;
}
if ((config_ptr = strstr(input_str, "key")) != NULL)
if (sscanf(config_ptr, "key(%i)", (int *) &controller[i].button[j].key) != 1)
DebugMessage(M64MSG_WARNING, "parsing error in key() parameter of button '%s' for controller %i", button_names[j], i + 1);
if ((config_ptr = strstr(input_str, "button")) != NULL)
if (sscanf(config_ptr, "button(%i)", &controller[i].button[j].button) != 1)
DebugMessage(M64MSG_WARNING, "parsing error in button() parameter of button '%s' for controller %i", button_names[j], i + 1);
if ((config_ptr = strstr(input_str, "axis")) != NULL)
{
char chAxisDir;
if (sscanf(config_ptr, "axis(%d%c,%d", &controller[i].button[j].axis, &chAxisDir, &controller[i].button[j].axis_deadzone) != 3 &&
sscanf(config_ptr, "axis(%i%c", &controller[i].button[j].axis, &chAxisDir) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in axis() parameter of button '%s' for controller %i", button_names[j], i + 1);
controller[i].button[j].axis_dir = (chAxisDir == '+' ? 1 : (chAxisDir == '-' ? -1 : 0));
}
if ((config_ptr = strstr(input_str, "hat")) != NULL)
{
char *lastchar = NULL;
if (sscanf(config_ptr, "hat(%i %15s", &controller[i].button[j].hat, value1_str) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in hat() parameter of button '%s' for controller %i", button_names[j], i + 1);
value1_str[15] = 0;
/* chop off the last character of value1_str if it is the closing parenthesis */
lastchar = &value1_str[strlen(value1_str) - 1];
if (lastchar > value1_str && *lastchar == ')') *lastchar = 0;
controller[i].button[j].hat_pos = get_hat_pos_by_name(value1_str);
}
if ((config_ptr = strstr(input_str, "mouse")) != NULL) {
// check for mouse_pseudo button first
if ((config_ptr = strstr(input_str, "mouse_up")) != NULL) {controller[i].button[j].mouse_up=1; controller[i].mouse_up=1;}
else if ((config_ptr = strstr(input_str, "mouse_down")) != NULL) {controller[i].button[j].mouse_down=1; controller[i].mouse_down=1;}
else if ((config_ptr = strstr(input_str, "mouse_left")) != NULL) {controller[i].button[j].mouse_left=1; controller[i].mouse_left=1;}
else if ((config_ptr = strstr(input_str, "mouse_right")) != NULL) {controller[i].button[j].mouse_right=1; controller[i].mouse_right=1;}
else if (sscanf(config_ptr, "mouse(%i)", &controller[i].button[j].mouse) != 1)
DebugMessage(M64MSG_WARNING, "parsing error in mouse() parameter of button '%s' for controller %i", button_names[j], i + 1);
}
}
/* load configuration for the 2 analog joystick axes */
for (j = X_AXIS; j <= Y_AXIS; j++)
{
int axis_idx = j - X_AXIS;
if (ConfigGetParameter(pConfig, button_names[j], M64TYPE_STRING, input_str, 256) != M64ERR_SUCCESS)
{
DebugMessage(M64MSG_WARNING, "missing config key '%s' for controller %i axis %i", button_names[j], i+1, axis_idx);
continue;
}
if ((config_ptr = strstr(input_str, "key")) != NULL)
if (sscanf(config_ptr, "key(%i,%i)", (int *) &controller[i].axis[axis_idx].key_a, (int *) &controller[i].axis[axis_idx].key_b) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in key() parameter of axis '%s' for controller %i", button_names[j], i + 1);
if ((config_ptr = strstr(input_str, "button")) != NULL)
if (sscanf(config_ptr, "button(%i,%i)", &controller[i].axis[axis_idx].button_a, &controller[i].axis[axis_idx].button_b) != 2)
DebugMessage(M64MSG_WARNING, "parsing error in button() parameter of axis '%s' for controller %i", button_names[j], i + 1);
if ((config_ptr = strstr(input_str, "axis")) != NULL)
{
char chAxisDir1, chAxisDir2;
if (sscanf(config_ptr, "axis(%i%c,%i%c)", &controller[i].axis[axis_idx].axis_a, &chAxisDir1,
&controller[i].axis[axis_idx].axis_b, &chAxisDir2) != 4)
DebugMessage(M64MSG_WARNING, "parsing error in axis() parameter of axis '%s' for controller %i", button_names[j], i + 1);
controller[i].axis[axis_idx].axis_dir_a = (chAxisDir1 == '+' ? 1 : (chAxisDir1 == '-' ? -1 : 0));
controller[i].axis[axis_idx].axis_dir_b = (chAxisDir2 == '+' ? 1 : (chAxisDir2 == '-' ? -1 : 0));
}
if ((config_ptr = strstr(input_str, "hat")) != NULL)
{
char *lastchar = NULL;
if (sscanf(config_ptr, "hat(%i %15s %15s", &controller[i].axis[axis_idx].hat, value1_str, value2_str) != 3)
DebugMessage(M64MSG_WARNING, "parsing error in hat() parameter of axis '%s' for controller %i", button_names[j], i + 1);
value1_str[15] = value2_str[15] = 0;
/* chop off the last character of value2_str if it is the closing parenthesis */
lastchar = &value2_str[strlen(value2_str) - 1];
if (lastchar > value2_str && *lastchar == ')') *lastchar = 0;
controller[i].axis[axis_idx].hat_pos_a = get_hat_pos_by_name(value1_str);
controller[i].axis[axis_idx].hat_pos_b = get_hat_pos_by_name(value2_str);
}
}
return 1;
}
