/**
Builds a HOB for a loaded PE32 module.
This function builds a HOB for a loaded PE32 module.
It can only be invoked during PEI phase;
for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
If ModuleName is NULL, then ASSERT().
If there is no additional space for HOB creation, then ASSERT().
@param ModuleName The GUID File Name of the module.
@param MemoryAllocationModule The 64 bit physical address of the module.
@param ModuleLength The length of the module in bytes.
@param EntryPoint The 64 bit physical address of the module's entry point.
**/
VOID
EFIAPI
GlueBuildModuleHob (
IN CONST EFI_GUID *ModuleName,
IN EFI_PHYSICAL_ADDRESS MemoryAllocationModule,
IN UINT64 ModuleLength,
IN EFI_PHYSICAL_ADDRESS EntryPoint
)
{
EFI_HOB_MEMORY_ALLOCATION_MODULE *Hob;
Hob = InternalPeiCreateHob (EFI_HOB_TYPE_MEMORY_ALLOCATION, (UINT16) sizeof (EFI_HOB_MEMORY_ALLOCATION_MODULE));
if (Hob == NULL) {
return;
}
CopyGuid (&(Hob->MemoryAllocationHeader.Name), &gEfiHobMemoryAllocModuleGuid);
Hob->MemoryAllocationHeader.MemoryBaseAddress = MemoryAllocationModule;
Hob->MemoryAllocationHeader.MemoryLength = ModuleLength;
Hob->MemoryAllocationHeader.MemoryType = EfiBootServicesCode;
//
// Zero the reserved space to match HOB spec
//
ZeroMem (Hob->MemoryAllocationHeader.Reserved, sizeof (Hob->MemoryAllocationHeader.Reserved));
CopyGuid (&Hob->ModuleName, ModuleName);
Hob->EntryPoint = EntryPoint;
}
/**
Builds a HOB for a loaded PE32 module.
This function builds a HOB for a loaded PE32 module.
It can only be invoked during PEI phase;
for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
If ModuleName is NULL, then ASSERT().
If there is no additional space for HOB creation, then ASSERT().
@param ModuleName The GUID File Name of the module.
@param MemoryAllocationModule The 64 bit physical address of the module.
@param ModuleLength The length of the module in bytes.
@param EntryPoint The 64 bit physical address of the module entry point.
**/
VOID
EFIAPI
BuildModuleHob (
IN CONST EFI_GUID *ModuleName,
IN EFI_PHYSICAL_ADDRESS MemoryAllocationModule,
IN UINT64 ModuleLength,
IN EFI_PHYSICAL_ADDRESS EntryPoint
)
{
EFI_HOB_MEMORY_ALLOCATION_MODULE *Hob;
ASSERT (((MemoryAllocationModule & (EFI_PAGE_SIZE - 1)) == 0) &&
((ModuleLength & (EFI_PAGE_SIZE - 1)) == 0));
Hob = CreateHob (EFI_HOB_TYPE_MEMORY_ALLOCATION, sizeof (EFI_HOB_MEMORY_ALLOCATION_MODULE));
CopyGuid (&(Hob->MemoryAllocationHeader.Name), &gEfiHobMemoryAllocModuleGuid);
Hob->MemoryAllocationHeader.MemoryBaseAddress = MemoryAllocationModule;
Hob->MemoryAllocationHeader.MemoryLength = ModuleLength;
Hob->MemoryAllocationHeader.MemoryType = EfiBootServicesCode;
//
// Zero the reserved space to match HOB spec
//
ZeroMem (Hob->MemoryAllocationHeader.Reserved, sizeof (Hob->MemoryAllocationHeader.Reserved));
CopyGuid (&Hob->ModuleName, ModuleName);
Hob->EntryPoint = EntryPoint;
}
EFI_STATUS
EFIAPI
InitializePlatformBootManagerLib (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_GUID *TerminalTypeGuid;
//
// Update UART device path nodes based on UART PCD settings
//
gPciUartDevicePath0.Uart.BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
gPciUartDevicePath0.Uart.DataBits = PcdGet8 (PcdUartDefaultDataBits);
gPciUartDevicePath0.Uart.Parity = PcdGet8 (PcdUartDefaultParity);
gPciUartDevicePath0.Uart.StopBits = PcdGet8 (PcdUartDefaultStopBits);
gPciUartDevicePath1.Uart.BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
gPciUartDevicePath1.Uart.DataBits = PcdGet8 (PcdUartDefaultDataBits);
gPciUartDevicePath1.Uart.Parity = PcdGet8 (PcdUartDefaultParity);
gPciUartDevicePath1.Uart.StopBits = PcdGet8 (PcdUartDefaultStopBits);
//
// Update Vendor device path nodes based on terminal type PCD settings
//
switch (PcdGet8 (PcdDefaultTerminalType)) {
case PCANSITYPE:
TerminalTypeGuid = &gEfiPcAnsiGuid;
break;
case VT100TYPE:
TerminalTypeGuid = &gEfiVT100Guid;
break;
case VT100PLUSTYPE:
TerminalTypeGuid = &gEfiVT100PlusGuid;
break;
case VTUTF8TYPE:
TerminalTypeGuid = &gEfiVTUTF8Guid;
break;
case TTYTERMTYPE:
TerminalTypeGuid = &gEfiTtyTermGuid;
break;
default:
TerminalTypeGuid = &gEfiPcAnsiGuid;
break;
}
CopyGuid (&gPciUartDevicePath0.TerminalType.Guid, TerminalTypeGuid);
CopyGuid (&gPciUartDevicePath1.TerminalType.Guid, TerminalTypeGuid);
return EFI_SUCCESS;
}
/**
Add an entry to the mDiscoveredList. Allocate memory to store the DriverEntry,
and initilize any state variables. Read the Depex from the FV and store it
in DriverEntry. Pre-process the Depex to set the Before and After state.
The Discovered list is never free'ed and contains booleans that represent the
other possible SMM driver states.
@param Fv Fv protocol, needed to read Depex info out of
FLASH.
@param FvHandle Handle for Fv, needed in the
EFI_SMM_DRIVER_ENTRY so that the PE image can be
read out of the FV at a later time.
@param DriverName Name of driver to add to mDiscoveredList.
@retval EFI_SUCCESS If driver was added to the mDiscoveredList.
@retval EFI_ALREADY_STARTED The driver has already been started. Only one
DriverName may be active in the system at any one
time.
**/
EFI_STATUS
SmmAddToDriverList (
IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv,
IN EFI_HANDLE FvHandle,
IN EFI_GUID *DriverName
)
{
EFI_SMM_DRIVER_ENTRY *DriverEntry;
//
// Create the Driver Entry for the list. ZeroPool initializes lots of variables to
// NULL or FALSE.
//
DriverEntry = AllocateZeroPool (sizeof (EFI_SMM_DRIVER_ENTRY));
ASSERT (DriverEntry != NULL);
DriverEntry->Signature = EFI_SMM_DRIVER_ENTRY_SIGNATURE;
CopyGuid (&DriverEntry->FileName, DriverName);
DriverEntry->FvHandle = FvHandle;
DriverEntry->Fv = Fv;
DriverEntry->FvFileDevicePath = SmmFvToDevicePath (Fv, FvHandle, DriverName);
SmmGetDepexSectionAndPreProccess (DriverEntry);
InsertTailList (&mDiscoveredList, &DriverEntry->Link);
gRequestDispatch = TRUE;
return EFI_SUCCESS;
}
/**
This function create a HII_THUNK_CONTEXT for the input UEFI HiiHandle
that is created when a package list registered by a module calling
EFI_HII_DATABASE_PROTOCOL.NewPackageList.
This function records the PackageListGuid of EFI_HII_PACKAGE_LIST_HEADER
into the TagGuid of the created HII_THUNK_CONTEXT.
@param UefiHiiHandle The UEFI HII Handle.
@return the new created Hii thunk context.
**/
HII_THUNK_CONTEXT *
CreateThunkContextForUefiHiiHandle (
IN EFI_HII_HANDLE UefiHiiHandle
)
{
EFI_STATUS Status;
EFI_GUID PackageGuid;
HII_THUNK_CONTEXT *ThunkContext;
ThunkContext = AllocateZeroPool (sizeof (*ThunkContext));
ASSERT (ThunkContext != NULL);
ThunkContext->Signature = HII_THUNK_CONTEXT_SIGNATURE;
Status = AllocateHiiHandle (&ThunkContext->FwHiiHandle);
if (EFI_ERROR (Status)) {
return NULL;
}
ThunkContext->UefiHiiHandle = UefiHiiHandle;
Status = ExtractGuidFromHiiHandle (UefiHiiHandle, &PackageGuid);
ASSERT_EFI_ERROR (Status);
CopyGuid(&ThunkContext->TagGuid, &PackageGuid);
return ThunkContext;
}
/**
Get FormSet GUID.
ASSERT if no FormSet Opcode is found.
@param Packages Form Framework Package.
@param FormSetGuid Return the FormSet Guid.
**/
VOID
GetFormSetGuid (
IN EFI_HII_PACKAGE_HEADER *Package,
OUT EFI_GUID *FormSetGuid
)
{
UINTN Offset;
EFI_IFR_OP_HEADER *OpCode;
EFI_IFR_FORM_SET *FormSet;
Offset = sizeof (EFI_HII_PACKAGE_HEADER);
while (Offset < Package->Length) {
OpCode = (EFI_IFR_OP_HEADER *)((UINT8 *) Package + Offset);
switch (OpCode->OpCode) {
case EFI_IFR_FORM_SET_OP:
FormSet = (EFI_IFR_FORM_SET *) OpCode;
CopyGuid (FormSetGuid, (EFI_GUID *)(VOID *)&FormSet->Guid);
return;
default:
break;
}
Offset += OpCode->Length;
}
//
// A proper IFR must have a formset opcode.
//
ASSERT (FALSE);
}
/**
Record capsule status variable and to local cache.
@param[in] CapsuleHeader The capsule image header
@param[in] CapsuleStatus The capsule process stauts
@retval EFI_SUCCESS The capsule status variable is recorded.
@retval EFI_OUT_OF_RESOURCES No resource to record the capsule status variable.
**/
EFI_STATUS
RecordCapsuleStatusVariable (
IN EFI_CAPSULE_HEADER *CapsuleHeader,
IN EFI_STATUS CapsuleStatus
)
{
EFI_CAPSULE_RESULT_VARIABLE_HEADER CapsuleResultVariable;
EFI_STATUS Status;
CapsuleResultVariable.VariableTotalSize = sizeof(CapsuleResultVariable);
CopyGuid (&CapsuleResultVariable.CapsuleGuid, &CapsuleHeader->CapsuleGuid);
ZeroMem(&CapsuleResultVariable.CapsuleProcessed, sizeof(CapsuleResultVariable.CapsuleProcessed));
gRT->GetTime(&CapsuleResultVariable.CapsuleProcessed, NULL);
CapsuleResultVariable.CapsuleStatus = CapsuleStatus;
//
// Save Local Cache
//
Status = WriteNewCapsuleResultVariableCache(&CapsuleResultVariable, sizeof(CapsuleResultVariable));
if ((CapsuleHeader->Flags & CAPSULE_FLAGS_PERSIST_ACROSS_RESET) != 0) {
Status = WriteNewCapsuleResultVariable(&CapsuleResultVariable, sizeof(CapsuleResultVariable));
}
return Status;
}
EFIAPI
GetAllSmmGaugeDataEx (VOID)
{
EFI_STATUS Status;
EFI_SMM_COMMUNICATE_HEADER *SmmCommBufferHeader;
SMM_PERF_COMMUNICATE_EX *SmmPerfCommData;
UINTN CommSize;
UINTN DataSize;
if (mGaugeDataEx != NULL) {
return mGaugeDataEx;
}
Status = GetCommunicationProtocol ();
if (EFI_ERROR (Status)) {
return NULL;
}
//
// Initialize communicate buffer
//
SmmCommBufferHeader = (EFI_SMM_COMMUNICATE_HEADER *)mSmmPerformanceBuffer;
SmmPerfCommData = (SMM_PERF_COMMUNICATE_EX *)SmmCommBufferHeader->Data;
ZeroMem((UINT8*)SmmPerfCommData, sizeof(SMM_PERF_COMMUNICATE_EX));
CopyGuid (&SmmCommBufferHeader->HeaderGuid, &gSmmPerformanceExProtocolGuid);
SmmCommBufferHeader->MessageLength = sizeof(SMM_PERF_COMMUNICATE_EX);
CommSize = SMM_PERFORMANCE_COMMUNICATION_BUFFER_SIZE;
//
// Get totol number of SMM gauge entries
//
SmmPerfCommData->Function = SMM_PERF_FUNCTION_GET_GAUGE_ENTRY_NUMBER;
Status = mSmmCommunication->Communicate (mSmmCommunication, mSmmPerformanceBuffer, &CommSize);
if (EFI_ERROR (Status) || EFI_ERROR (SmmPerfCommData->ReturnStatus) || SmmPerfCommData->NumberOfEntries == 0) {
return NULL;
}
mGaugeNumberOfEntriesEx = SmmPerfCommData->NumberOfEntries;
DataSize = mGaugeNumberOfEntriesEx * sizeof(GAUGE_DATA_ENTRY_EX);
mGaugeDataEx = AllocateZeroPool(DataSize);
ASSERT (mGaugeDataEx != NULL);
//
// Get all SMM gauge data
//
SmmPerfCommData->Function = SMM_PERF_FUNCTION_GET_GAUGE_DATA;
SmmPerfCommData->LogEntryKey = 0;
SmmPerfCommData->NumberOfEntries = mGaugeNumberOfEntriesEx;
SmmPerfCommData->GaugeDataEx = mGaugeDataEx;
Status = mSmmCommunication->Communicate (mSmmCommunication, mSmmPerformanceBuffer, &CommSize);
if (EFI_ERROR (Status) || EFI_ERROR (SmmPerfCommData->ReturnStatus)) {
FreePool (mGaugeDataEx);
mGaugeDataEx = NULL;
mGaugeNumberOfEntriesEx = 0;
}
return mGaugeDataEx;
}
EFIAPI
BuildGuidHob (
IN CONST EFI_GUID *Guid,
IN UINTN DataLength
)
{
EFI_HOB_GUID_TYPE *Hob;
//
// Make sure Guid is valid
//
ASSERT (Guid != NULL);
//
// Make sure that data length is not too long.
//
ASSERT (DataLength <= (0xffff - sizeof (EFI_HOB_GUID_TYPE)));
Hob = InternalPeiCreateHob (EFI_HOB_TYPE_GUID_EXTENSION, (UINT16) (sizeof (EFI_HOB_GUID_TYPE) + DataLength));
if (Hob == NULL) {
return Hob;
}
CopyGuid (&Hob->Name, Guid);
return Hob + 1;
}
/**
Builds a HOB for the Stack.
This function builds a HOB for the stack.
It can only be invoked during PEI phase;
for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
If there is no additional space for HOB creation, then ASSERT().
@param BaseAddress The 64 bit physical address of the Stack.
@param Length The length of the stack in bytes.
**/
VOID
EFIAPI
BuildStackHob (
IN EFI_PHYSICAL_ADDRESS BaseAddress,
IN UINT64 Length
)
{
EFI_HOB_MEMORY_ALLOCATION_STACK *Hob;
ASSERT (((BaseAddress & (EFI_PAGE_SIZE - 1)) == 0) &&
((Length & (EFI_PAGE_SIZE - 1)) == 0));
Hob = InternalPeiCreateHob (EFI_HOB_TYPE_MEMORY_ALLOCATION, (UINT16) sizeof (EFI_HOB_MEMORY_ALLOCATION_STACK));
if (Hob == NULL) {
return;
}
CopyGuid (&(Hob->AllocDescriptor.Name), &gEfiHobMemoryAllocStackGuid);
Hob->AllocDescriptor.MemoryBaseAddress = BaseAddress;
Hob->AllocDescriptor.MemoryLength = Length;
Hob->AllocDescriptor.MemoryType = EfiBootServicesData;
//
// Zero the reserved space to match HOB spec
//
ZeroMem (Hob->AllocDescriptor.Reserved, sizeof (Hob->AllocDescriptor.Reserved));
}
/**
Returns information about the random number generation implementation.
@param[in] This A pointer to the EFI_RNG_PROTOCOL
instance.
@param[in,out] RNGAlgorithmListSize On input, the size in bytes of
RNGAlgorithmList.
On output with a return code of
EFI_SUCCESS, the size in bytes of the
data returned in RNGAlgorithmList. On
output with a return code of
EFI_BUFFER_TOO_SMALL, the size of
RNGAlgorithmList required to obtain the
list.
@param[out] RNGAlgorithmList A caller-allocated memory buffer filled
by the driver with one EFI_RNG_ALGORITHM
element for each supported RNG algorithm.
The list must not change across multiple
calls to the same driver. The first
algorithm in the list is the default
algorithm for the driver.
@retval EFI_SUCCESS The RNG algorithm list was returned
successfully.
@retval EFI_UNSUPPORTED The services is not supported by this
driver.
@retval EFI_DEVICE_ERROR The list of algorithms could not be
retrieved due to a hardware or firmware
error.
@retval EFI_INVALID_PARAMETER One or more of the parameters are
incorrect.
@retval EFI_BUFFER_TOO_SMALL The buffer RNGAlgorithmList is too small
to hold the result.
**/
STATIC
EFI_STATUS
EFIAPI
VirtioRngGetInfo (
IN EFI_RNG_PROTOCOL *This,
IN OUT UINTN *RNGAlgorithmListSize,
OUT EFI_RNG_ALGORITHM *RNGAlgorithmList
)
{
if (This == NULL || RNGAlgorithmListSize == NULL) {
return EFI_INVALID_PARAMETER;
}
if (*RNGAlgorithmListSize < sizeof (EFI_RNG_ALGORITHM)) {
*RNGAlgorithmListSize = sizeof (EFI_RNG_ALGORITHM);
return EFI_BUFFER_TOO_SMALL;
}
if (RNGAlgorithmList == NULL) {
return EFI_INVALID_PARAMETER;
}
*RNGAlgorithmListSize = sizeof (EFI_RNG_ALGORITHM);
CopyGuid (RNGAlgorithmList, &gEfiRngAlgorithmRaw);
return EFI_SUCCESS;
}
/**
Initialize the communicate buffer using DataSize and Function number.
@param[out] CommunicateBuffer The communicate buffer. Caller should free it after use.
@param[out] DataPtr Points to the data in the communicate buffer. Caller should not free it.
@param[in] DataSize The payload size.
@param[in] Function The function number used to initialize the communicate header.
**/
VOID
InitCommunicateBuffer (
OUT VOID **CommunicateBuffer,
OUT VOID **DataPtr,
IN UINTN DataSize,
IN UINTN Function
)
{
EFI_SMM_COMMUNICATE_HEADER *SmmCommunicateHeader;
SMM_FTW_COMMUNICATE_FUNCTION_HEADER *SmmFtwFunctionHeader;
//
// The whole buffer size: SMM_COMMUNICATE_HEADER_SIZE + SMM_FTW_COMMUNICATE_HEADER_SIZE + DataSize.
//
SmmCommunicateHeader = AllocateZeroPool (DataSize + SMM_COMMUNICATE_HEADER_SIZE + SMM_FTW_COMMUNICATE_HEADER_SIZE);
ASSERT (SmmCommunicateHeader != NULL);
//
// Prepare data buffer.
//
CopyGuid (&SmmCommunicateHeader->HeaderGuid, &gEfiSmmFaultTolerantWriteProtocolGuid);
SmmCommunicateHeader->MessageLength = DataSize + SMM_FTW_COMMUNICATE_HEADER_SIZE;
SmmFtwFunctionHeader = (SMM_FTW_COMMUNICATE_FUNCTION_HEADER *) SmmCommunicateHeader->Data;
SmmFtwFunctionHeader->Function = Function;
*CommunicateBuffer = SmmCommunicateHeader;
if (DataPtr != NULL) {
*DataPtr = SmmFtwFunctionHeader->Data;
}
}
/**
Allocates space for the protocol to maintain information about writes.
Since writes must be completed in a fault-tolerant manner and multiple
writes require more resources to be successful, this function
enables the protocol to ensure that enough space exists to track
information about upcoming writes.
@param[in] This A pointer to the calling context.
@param[in] CallerId The GUID identifying the write.
@param[in] PrivateDataSize The size of the caller's private data that must be
recorded for each write.
@param[in] NumberOfWrites The number of fault tolerant block writes that will
need to occur.
@retval EFI_SUCCESS The function completed successfully
@retval EFI_ABORTED The function could not complete successfully.
@retval EFI_ACCESS_DENIED Not all allocated writes have been completed. All
writes must be completed or aborted before another
fault tolerant write can occur.
**/
EFI_STATUS
EFIAPI
FtwAllocate (
IN EFI_FAULT_TOLERANT_WRITE_PROTOCOL *This,
IN EFI_GUID *CallerId,
IN UINTN PrivateDataSize,
IN UINTN NumberOfWrites
)
{
EFI_STATUS Status;
UINTN PayloadSize;
EFI_SMM_COMMUNICATE_HEADER *SmmCommunicateHeader;
SMM_FTW_ALLOCATE_HEADER *SmmFtwAllocateHeader;
//
// Initialize the communicate buffer.
//
PayloadSize = sizeof (SMM_FTW_ALLOCATE_HEADER);
InitCommunicateBuffer ((VOID **)&SmmCommunicateHeader, (VOID **)&SmmFtwAllocateHeader, PayloadSize, FTW_FUNCTION_ALLOCATE);
CopyGuid (&SmmFtwAllocateHeader->CallerId, CallerId);
SmmFtwAllocateHeader->PrivateDataSize = PrivateDataSize;
SmmFtwAllocateHeader->NumberOfWrites = NumberOfWrites;
//
// Send data to SMM.
//
Status = SendCommunicateBuffer (SmmCommunicateHeader, PayloadSize);
if (!EFI_ERROR( Status)) {
mPrivateDataSize = PrivateDataSize;
}
FreePool (SmmCommunicateHeader);
return Status;
}
/**
Builds a HOB for the BSP store.
This function builds a HOB for BSP store.
It can only be invoked during PEI phase;
for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
If there is no additional space for HOB creation, then ASSERT().
@param BaseAddress The 64 bit physical address of the BSP.
@param Length The length of the BSP store in bytes.
@param MemoryType Type of memory allocated by this HOB.
**/
VOID
EFIAPI
BuildBspStoreHob (
IN EFI_PHYSICAL_ADDRESS BaseAddress,
IN UINT64 Length,
IN EFI_MEMORY_TYPE MemoryType
)
{
EFI_HOB_MEMORY_ALLOCATION_BSP_STORE *Hob;
Hob = InternalPeiCreateHob (EFI_HOB_TYPE_MEMORY_ALLOCATION, (UINT16) sizeof (EFI_HOB_MEMORY_ALLOCATION_BSP_STORE));
if (Hob == NULL) {
return;
}
CopyGuid (&(Hob->AllocDescriptor.Name), &gEfiHobMemoryAllocBspStoreGuid);
Hob->AllocDescriptor.MemoryBaseAddress = BaseAddress;
Hob->AllocDescriptor.MemoryLength = Length;
Hob->AllocDescriptor.MemoryType = MemoryType;
//
// Zero the reserved space to match HOB spec
//
ZeroMem (Hob->AllocDescriptor.Reserved, sizeof (Hob->AllocDescriptor.Reserved));
}
/**
Find the corressponding TAG GUID from a Framework HII Handle given.
@param Private The HII Thunk Module Private context.
@param FwHiiHandle The Framemwork HII Handle.
@param TagGuid The output of TAG GUID found.
@return NULL If Framework HII Handle is invalid.
@return The corresponding HII Thunk Context.
**/
EFI_STATUS
GetTagGuidByFwHiiHandle (
IN CONST HII_THUNK_PRIVATE_DATA *Private,
IN FRAMEWORK_EFI_HII_HANDLE FwHiiHandle,
OUT EFI_GUID *TagGuid
)
{
LIST_ENTRY *Link;
HII_THUNK_CONTEXT *ThunkContext;
ASSERT (TagGuid != NULL);
Link = GetFirstNode (&Private->ThunkContextListHead);
while (!IsNull (&Private->ThunkContextListHead, Link)) {
ThunkContext = HII_THUNK_CONTEXT_FROM_LINK (Link);
if (FwHiiHandle == ThunkContext->FwHiiHandle) {
CopyGuid (TagGuid, &ThunkContext->TagGuid);
return EFI_SUCCESS;
}
Link = GetNextNode (&Private->ThunkContextListHead, Link);
}
return EFI_NOT_FOUND;
}
/**
Registers handlers of type EXTRACT_GUIDED_SECTION_GET_INFO_HANDLER and EXTRACT_GUIDED_SECTION_DECODE_HANDLER
for a specific GUID section type.
Registers the handlers specified by GetInfoHandler and DecodeHandler with the GUID specified by SectionGuid.
If the GUID value specified by SectionGuid has already been registered, then return RETURN_ALREADY_STARTED.
If there are not enough resources available to register the handlers then RETURN_OUT_OF_RESOURCES is returned.
If SectionGuid is NULL, then ASSERT().
If GetInfoHandler is NULL, then ASSERT().
If DecodeHandler is NULL, then ASSERT().
@param[in] SectionGuid A pointer to the GUID associated with the the handlers
of the GUIDed section type being registered.
@param[in] GetInfoHandler The pointer to a function that examines a GUIDed section and returns the
size of the decoded buffer and the size of an optional scratch buffer
required to actually decode the data in a GUIDed section.
@param[in] DecodeHandler The pointer to a function that decodes a GUIDed section into a caller
allocated output buffer.
@retval RETURN_SUCCESS The handlers were registered.
@retval RETURN_OUT_OF_RESOURCES There are not enough resources available to register the handlers.
**/
RETURN_STATUS
EFIAPI
ExtractGuidedSectionRegisterHandlers (
IN CONST GUID *SectionGuid,
IN EXTRACT_GUIDED_SECTION_GET_INFO_HANDLER GetInfoHandler,
IN EXTRACT_GUIDED_SECTION_DECODE_HANDLER DecodeHandler
)
{
UINT32 Index;
RETURN_STATUS Status;
EXTRACT_GUIDED_SECTION_HANDLER_INFO *HandlerInfo;
//
// Check input paramter
//
ASSERT (SectionGuid != NULL);
ASSERT (GetInfoHandler != NULL);
ASSERT (DecodeHandler != NULL);
//
// Get the registered handler information
//
Status = GetExtractGuidedSectionHandlerInfo (&HandlerInfo);
if (RETURN_ERROR (Status)) {
return Status;
}
//
// Search the match registered GetInfo handler for the input guided section.
//
ASSERT (HandlerInfo != NULL);
for (Index = 0; Index < HandlerInfo->NumberOfExtractHandler; Index ++) {
if (CompareGuid (HandlerInfo->ExtractHandlerGuidTable + Index, SectionGuid)) {
//
// If the guided handler has been registered before, only update its handler.
//
HandlerInfo->ExtractDecodeHandlerTable [Index] = DecodeHandler;
HandlerInfo->ExtractGetInfoHandlerTable [Index] = GetInfoHandler;
return RETURN_SUCCESS;
}
}
//
// Check the global table is enough to contain new Handler.
//
if (HandlerInfo->NumberOfExtractHandler >= PcdGet32 (PcdMaximumGuidedExtractHandler)) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Register new Handler and guid value.
//
CopyGuid (HandlerInfo->ExtractHandlerGuidTable + HandlerInfo->NumberOfExtractHandler, SectionGuid);
HandlerInfo->ExtractDecodeHandlerTable [HandlerInfo->NumberOfExtractHandler] = DecodeHandler;
HandlerInfo->ExtractGetInfoHandlerTable [HandlerInfo->NumberOfExtractHandler++] = GetInfoHandler;
return RETURN_SUCCESS;
}
/**
Create entire FFS file.
@param FileHeader Starting Address of a Buffer that hold the FFS File image.
@param FfsFileBuffer The source buffer that contains the File Data.
@param BufferSize The length of FfsFileBuffer.
@param ActualFileSize Size of FFS file.
@param FileName The Guid of Ffs File.
@param FileType The type of the written Ffs File.
@param FileAttributes The attributes of the written Ffs File.
@retval EFI_INVALID_PARAMETER File type is not valid.
@retval EFI_SUCCESS FFS file is successfully created.
**/
EFI_STATUS
FvFillFfsFile (
OUT EFI_FFS_FILE_HEADER *FileHeader,
IN UINT8 *FfsFileBuffer,
IN UINTN BufferSize,
IN UINTN ActualFileSize,
IN EFI_GUID *FileName,
IN EFI_FV_FILETYPE FileType,
IN EFI_FV_FILE_ATTRIBUTES FileAttributes
)
{
EFI_FFS_FILE_ATTRIBUTES TmpFileAttribute;
EFI_FFS_FILE_HEADER *TmpFileHeader;
//
// File Type value 0x0E~0xE0 are reserved
//
if ((FileType > EFI_FV_FILETYPE_SMM_CORE) && (FileType < 0xE0)) {
return EFI_INVALID_PARAMETER;
}
TmpFileHeader = (EFI_FFS_FILE_HEADER *) FfsFileBuffer;
//
// First fill all fields ready in FfsFileBuffer
//
CopyGuid (&TmpFileHeader->Name, FileName);
TmpFileHeader->Type = FileType;
//
// Convert the FileAttributes to FFSFileAttributes
//
FvFileAttrib2FfsFileAttrib (FileAttributes, &TmpFileAttribute);
TmpFileHeader->Attributes = TmpFileAttribute;
if (ActualFileSize > 0x00FFFFFF) {
((EFI_FFS_FILE_HEADER2 *) FileHeader)->ExtendedSize = (UINT32) ActualFileSize;
*(UINT32 *) FileHeader->Size &= 0xFF000000;
FileHeader->Attributes |= FFS_ATTRIB_LARGE_FILE;
} else {
*(UINT32 *) FileHeader->Size &= 0xFF000000;
*(UINT32 *) FileHeader->Size |= ActualFileSize;
}
SetHeaderChecksum (TmpFileHeader);
SetFileChecksum (TmpFileHeader, ActualFileSize);
SetFileState (EFI_FILE_HEADER_CONSTRUCTION, TmpFileHeader);
SetFileState (EFI_FILE_HEADER_VALID, TmpFileHeader);
SetFileState (EFI_FILE_DATA_VALID, TmpFileHeader);
//
// Copy data from FfsFileBuffer to FileHeader(cache)
//
CopyMem (FileHeader, FfsFileBuffer, BufferSize);
return EFI_SUCCESS;
}
/**
Finds the protocol entry for the requested protocol.
The gProtocolDatabaseLock must be owned
@param Protocol The ID of the protocol
@param Create Create a new entry if not found
@return Protocol entry
**/
PROTOCOL_ENTRY *
CoreFindProtocolEntry (
IN EFI_GUID *Protocol,
IN BOOLEAN Create
)
{
LIST_ENTRY *Link;
PROTOCOL_ENTRY *Item;
PROTOCOL_ENTRY *ProtEntry;
ASSERT_LOCKED(&gProtocolDatabaseLock);
//
// Search the database for the matching GUID
//
ProtEntry = NULL;
for (Link = mProtocolDatabase.ForwardLink;
Link != &mProtocolDatabase;
Link = Link->ForwardLink) {
Item = CR(Link, PROTOCOL_ENTRY, AllEntries, PROTOCOL_ENTRY_SIGNATURE);
if (CompareGuid (&Item->ProtocolID, Protocol)) {
//
// This is the protocol entry
//
ProtEntry = Item;
break;
}
}
//
// If the protocol entry was not found and Create is TRUE, then
// allocate a new entry
//
if ((ProtEntry == NULL) && Create) {
ProtEntry = AllocatePool (sizeof(PROTOCOL_ENTRY));
if (ProtEntry != NULL) {
//
// Initialize new protocol entry structure
//
ProtEntry->Signature = PROTOCOL_ENTRY_SIGNATURE;
CopyGuid ((VOID *)&ProtEntry->ProtocolID, Protocol);
InitializeListHead (&ProtEntry->Protocols);
InitializeListHead (&ProtEntry->Notify);
//
// Add it to protocol database
//
InsertTailList (&mProtocolDatabase, &ProtEntry->AllEntries);
}
}
return ProtEntry;
}
/**
Builds a EFI_HOB_TYPE_FV2 HOB.
This function builds a EFI_HOB_TYPE_FV2 HOB.
It can only be invoked during PEI phase;
for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
If there is no additional space for HOB creation, then ASSERT().
@param BaseAddress The base address of the Firmware Volume.
@param Length The size of the Firmware Volume in bytes.
@param FvName The name of the Firmware Volume.
@param FileName The name of the file.
**/
VOID
EFIAPI
BuildFv2Hob (
IN EFI_PHYSICAL_ADDRESS BaseAddress,
IN UINT64 Length,
IN CONST EFI_GUID *FvName,
IN CONST EFI_GUID *FileName
)
{
EFI_HOB_FIRMWARE_VOLUME2 *Hob;
Hob = CreateHob (EFI_HOB_TYPE_FV2, sizeof (EFI_HOB_FIRMWARE_VOLUME2));
Hob->BaseAddress = BaseAddress;
Hob->Length = Length;
CopyGuid (&Hob->FvName, FvName);
CopyGuid (&Hob->FileName, FileName);
}
/**
Record FMP capsule status variable and to local cache.
@param[in] CapsuleHeader The capsule image header
@param[in] CapsuleStatus The capsule process stauts
@param[in] PayloadIndex FMP payload index
@param[in] ImageHeader FMP image header
@retval EFI_SUCCESS The capsule status variable is recorded.
@retval EFI_OUT_OF_RESOURCES No resource to record the capsule status variable.
**/
EFI_STATUS
RecordFmpCapsuleStatusVariable (
IN EFI_CAPSULE_HEADER *CapsuleHeader,
IN EFI_STATUS CapsuleStatus,
IN UINTN PayloadIndex,
IN EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER *ImageHeader
)
{
EFI_CAPSULE_RESULT_VARIABLE_HEADER *CapsuleResultVariableHeader;
EFI_CAPSULE_RESULT_VARIABLE_FMP *CapsuleResultVariableFmp;
EFI_STATUS Status;
UINT8 *CapsuleResultVariable;
UINT32 CapsuleResultVariableSize;
CapsuleResultVariable = NULL;
CapsuleResultVariableSize = sizeof(EFI_CAPSULE_RESULT_VARIABLE_HEADER) + sizeof(EFI_CAPSULE_RESULT_VARIABLE_FMP);
CapsuleResultVariable = AllocatePool (CapsuleResultVariableSize);
if (CapsuleResultVariable == NULL) {
return EFI_OUT_OF_RESOURCES;
}
CapsuleResultVariableHeader = (VOID *)CapsuleResultVariable;
CapsuleResultVariableHeader->VariableTotalSize = CapsuleResultVariableSize;
CopyGuid(&CapsuleResultVariableHeader->CapsuleGuid, &CapsuleHeader->CapsuleGuid);
ZeroMem(&CapsuleResultVariableHeader->CapsuleProcessed, sizeof(CapsuleResultVariableHeader->CapsuleProcessed));
gRT->GetTime(&CapsuleResultVariableHeader->CapsuleProcessed, NULL);
CapsuleResultVariableHeader->CapsuleStatus = CapsuleStatus;
CapsuleResultVariableFmp = (VOID *)(CapsuleResultVariable + sizeof(EFI_CAPSULE_RESULT_VARIABLE_HEADER));
CapsuleResultVariableFmp->Version = 0x1;
CapsuleResultVariableFmp->PayloadIndex = (UINT8)PayloadIndex;
CapsuleResultVariableFmp->UpdateImageIndex = ImageHeader->UpdateImageIndex;
CopyGuid (&CapsuleResultVariableFmp->UpdateImageTypeId, &ImageHeader->UpdateImageTypeId);
//
// Save Local Cache
//
Status = WriteNewCapsuleResultVariableCache(CapsuleResultVariable, CapsuleResultVariableSize);
if ((CapsuleHeader->Flags & CAPSULE_FLAGS_PERSIST_ACROSS_RESET) != 0) {
Status = WriteNewCapsuleResultVariable(CapsuleResultVariable, CapsuleResultVariableSize);
}
FreePool (CapsuleResultVariable);
return Status;
}
/**
Generate a Random GUID.
@param Guid On output, a Random GUID will be filled.
**/
VOID
GenerateRandomGuid (
OUT EFI_GUID * Guid
)
{
CopyGuid (Guid, &mGuidBase);
mGuidCount++;
*((UINT64 *) Guid) = *((UINT64 *) Guid) + mGuidCount;
}
/**
Do the platform init, can be customized by OEM/IBV
Possible things that can be done in PlatformBootManagerBeforeConsole:
> Update console variable: 1. include hot-plug devices;
> 2. Clear ConIn and add SOL for AMT
> Register new Driver#### or Boot####
> Register new Key####: e.g.: F12
> Signal ReadyToLock event
> Authentication action: 1. connect Auth devices;
> 2. Identify auto logon user.
**/
VOID
EFIAPI
PlatformBootManagerBeforeConsole (
VOID
)
{
//
// Signal EndOfDxe PI Event
//
EfiEventGroupSignal (&gEfiEndOfDxeEventGroupGuid);
//
// Locate the PCI root bridges and make the PCI bus driver connect each,
// non-recursively. This will produce a number of child handles with PciIo on
// them.
//
FilterAndProcess (&gEfiPciRootBridgeIoProtocolGuid, NULL, Connect);
//
// Find all display class PCI devices (using the handles from the previous
// step), and connect them non-recursively. This should produce a number of
// child handles with GOPs on them.
//
FilterAndProcess (&gEfiPciIoProtocolGuid, IsPciDisplay, Connect);
//
// Now add the device path of all handles with GOP on them to ConOut and
// ErrOut.
//
FilterAndProcess (&gEfiGraphicsOutputProtocolGuid, NULL, AddOutput);
//
// Add the hardcoded short-form USB keyboard device path to ConIn.
//
EfiBootManagerUpdateConsoleVariable (ConIn,
(EFI_DEVICE_PATH_PROTOCOL *)&mUsbKeyboard, NULL);
//
// Add the hardcoded serial console device path to ConIn, ConOut, ErrOut.
//
ASSERT (FixedPcdGet8 (PcdDefaultTerminalType) == 4);
CopyGuid (&mSerialConsole.TermType.Guid, &gEfiTtyTermGuid);
EfiBootManagerUpdateConsoleVariable (ConIn,
(EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole, NULL);
EfiBootManagerUpdateConsoleVariable (ConOut,
(EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole, NULL);
EfiBootManagerUpdateConsoleVariable (ErrOut,
(EFI_DEVICE_PATH_PROTOCOL *)&mSerialConsole, NULL);
//
// Register platform-specific boot options and keyboard shortcuts.
//
PlatformRegisterOptionsAndKeys ();
}
/**
This function creates hash interface hob.
@param Identifier Identifier to create hash interface hob.
@retval hash interface hob.
**/
HASH_INTERFACE_HOB *
InternalCreateHashInterfaceHob (
EFI_GUID *Identifier
)
{
HASH_INTERFACE_HOB LocalHashInterfaceHob;
ZeroMem (&LocalHashInterfaceHob, sizeof(LocalHashInterfaceHob));
CopyGuid (&LocalHashInterfaceHob.Identifier, Identifier);
return BuildGuidDataHob (&mHashLibPeiRouterGuid, &LocalHashInterfaceHob, sizeof(LocalHashInterfaceHob));
}
RETURN_STATUS
EFIAPI
ExtractGuidedSectionRegisterHandlers (
IN CONST GUID *SectionGuid,
IN EXTRACT_GUIDED_SECTION_GET_INFO_HANDLER GetInfoHandler,
IN EXTRACT_GUIDED_SECTION_DECODE_HANDLER DecodeHandler
)
{
PRE_PI_EXTRACT_GUIDED_SECTION_DATA *SavedData;
UINT32 Index;
//
// Check input paramter.
//
if (SectionGuid == NULL) {
return RETURN_INVALID_PARAMETER;
}
SavedData = GetSavedData();
//
// Search the match registered GetInfo handler for the input guided section.
//
for (Index = 0; Index < SavedData->NumberOfExtractHandler; Index ++) {
if (CompareGuid (&SavedData->ExtractHandlerGuidTable[Index], SectionGuid)) {
break;
}
}
//
// If the guided handler has been registered before, only update its handler.
//
if (Index < SavedData->NumberOfExtractHandler) {
SavedData->ExtractDecodeHandlerTable [Index] = DecodeHandler;
SavedData->ExtractGetInfoHandlerTable [Index] = GetInfoHandler;
return RETURN_SUCCESS;
}
//
// Check the global table is enough to contain new Handler.
//
if (SavedData->NumberOfExtractHandler >= PcdGet32 (PcdMaximumGuidedExtractHandler)) {
return RETURN_OUT_OF_RESOURCES;
}
//
// Register new Handler and guid value.
//
CopyGuid (&SavedData->ExtractHandlerGuidTable [SavedData->NumberOfExtractHandler], SectionGuid);
SavedData->ExtractDecodeHandlerTable [SavedData->NumberOfExtractHandler] = DecodeHandler;
SavedData->ExtractGetInfoHandlerTable [SavedData->NumberOfExtractHandler++] = GetInfoHandler;
return RETURN_SUCCESS;
}
/**
Builds a EFI_HOB_TYPE_FV2 HOB.
This function builds a EFI_HOB_TYPE_FV2 HOB.
It can only be invoked during PEI phase;
for DXE phase, it will ASSERT() since PEI HOB is read-only for DXE phase.
If there is no additional space for HOB creation, then ASSERT().
@param BaseAddress The base address of the Firmware Volume.
@param Length The size of the Firmware Volume in bytes.
@param FvName The name of the Firmware Volume.
@param FileName The name of the file.
**/
VOID
EFIAPI
BuildFv2Hob (
IN EFI_PHYSICAL_ADDRESS BaseAddress,
IN UINT64 Length,
IN CONST EFI_GUID *FvName,
IN CONST EFI_GUID *FileName
)
{
EFI_HOB_FIRMWARE_VOLUME2 *Hob;
Hob = InternalPeiCreateHob (EFI_HOB_TYPE_FV2, (UINT16) sizeof (EFI_HOB_FIRMWARE_VOLUME2));
if (Hob == NULL) {
return;
}
Hob->BaseAddress = BaseAddress;
Hob->Length = Length;
CopyGuid (&Hob->FvName, FvName);
CopyGuid (&Hob->FileName, FileName);
}
/**
The constructor function.
@retval EFI_SUCCESS The constructor successfully .
**/
EFI_STATUS
EFIAPI
EdkiiSystemCapsuleLibConstructor (
VOID
)
{
mImageFmpInfoSize = PcdGetSize(PcdEdkiiSystemFirmwareImageDescriptor);
mImageFmpInfo = AllocateCopyPool (mImageFmpInfoSize, PcdGetPtr(PcdEdkiiSystemFirmwareImageDescriptor));
ASSERT(mImageFmpInfo != NULL);
CopyGuid(&mEdkiiSystemFirmwareFileGuid, PcdGetPtr(PcdEdkiiSystemFirmwareFileGuid));
return EFI_SUCCESS;
}
/**
This function will save confidential information to lockbox.
@param Guid the guid to identify the confidential information
@param Buffer the address of the confidential information
@param Length the length of the confidential information
@retval RETURN_SUCCESS the information is saved successfully.
@retval RETURN_INVALID_PARAMETER the Guid is NULL, or Buffer is NULL, or
Length is 0
@retval RETURN_ALREADY_STARTED the requested GUID already exist.
@retval RETURN_OUT_OF_RESOURCES no enough resource to save the information.
@retval RETURN_ACCESS_DENIED it is too late to invoke this interface
@retval RETURN_NOT_STARTED it is too early to invoke this interface
@retval RETURN_UNSUPPORTED the service is not supported by
implementaion.
**/
RETURN_STATUS
EFIAPI
SaveLockBox (
IN GUID *Guid,
IN VOID *Buffer,
IN UINTN Length
)
{
LOCK_BOX_ENTRY *Header;
VOID *CopyBuffer;
DEBUG ((DEBUG_VERBOSE, "%a: Guid=%g Buffer=%p Length=0x%x\n", __FUNCTION__,
Guid, Buffer, (UINT32) Length));
if (Guid == NULL || Buffer == NULL || Length == 0) {
return RETURN_INVALID_PARAMETER;
}
if (Length > 0xFFFFFFFF) {
return RETURN_OUT_OF_RESOURCES;
}
Header = FindHeaderByGuid (Guid);
if (Header == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
if (Header->Size > 0) {
return RETURN_ALREADY_STARTED;
}
CopyBuffer = AllocateAcpiNvsPool (Length);
if (CopyBuffer == NULL) {
return RETURN_OUT_OF_RESOURCES;
}
//
// overwrite the current terminator header with new metadata
//
CopyGuid (&Header->Guid, Guid);
Header->OrigAddress = (UINTN) Buffer;
Header->CopyAddress = (UINTN) CopyBuffer;
Header->Size = (UINT32) Length;
Header->Attributes = 0;
//
// copy contents
//
CopyMem (CopyBuffer, Buffer, Length);
return RETURN_SUCCESS;
}
EFI_STATUS
MMCBuildDevicePath (
IN EFI_MMC_HOST_PROTOCOL *This,
IN EFI_DEVICE_PATH_PROTOCOL **DevicePath
)
{
EFI_DEVICE_PATH_PROTOCOL *NewDevicePathNode;
NewDevicePathNode = CreateDeviceNode(HARDWARE_DEVICE_PATH,HW_VENDOR_DP,sizeof(VENDOR_DEVICE_PATH));
CopyGuid(&((VENDOR_DEVICE_PATH*)NewDevicePathNode)->Guid,&mPL180MciDevicePathGuid);
*DevicePath = NewDevicePathNode;
return EFI_SUCCESS;
}
EFIAPI
MmCoreFindMmiEntry (
IN EFI_GUID *HandlerType,
IN BOOLEAN Create
)
{
LIST_ENTRY *Link;
MMI_ENTRY *Item;
MMI_ENTRY *MmiEntry;
//
// Search the MMI entry list for the matching GUID
//
MmiEntry = NULL;
for (Link = mMmiEntryList.ForwardLink;
Link != &mMmiEntryList;
Link = Link->ForwardLink) {
Item = CR (Link, MMI_ENTRY, AllEntries, MMI_ENTRY_SIGNATURE);
if (CompareGuid (&Item->HandlerType, HandlerType)) {
//
// This is the MMI entry
//
MmiEntry = Item;
break;
}
}
//
// If the protocol entry was not found and Create is TRUE, then
// allocate a new entry
//
if ((MmiEntry == NULL) && Create) {
MmiEntry = AllocatePool (sizeof (MMI_ENTRY));
if (MmiEntry != NULL) {
//
// Initialize new MMI entry structure
//
MmiEntry->Signature = MMI_ENTRY_SIGNATURE;
CopyGuid ((VOID *)&MmiEntry->HandlerType, HandlerType);
InitializeListHead (&MmiEntry->MmiHandlers);
//
// Add it to MMI entry list
//
InsertTailList (&mMmiEntryList, &MmiEntry->AllEntries);
}
}
return MmiEntry;
}
/**
This is a shorthand helper function to reset with a subtype so that
the caller doesn't have to bother with a function that has half a dozen
parameters.
This will generate a reset with status EFI_SUCCESS, a NULL string, and
no custom data. The subtype will be formatted in such a way that it can be
picked up by notification registrations and custom handlers.
NOTE: This call will fail if the architectural ResetSystem underpinnings
are not initialized. For DXE, you can add gEfiResetArchProtocolGuid
to your DEPEX.
@param[in] ResetSubtype GUID pointer for the reset subtype to be used.
**/
VOID
EFIAPI
ResetPlatformSpecificGuid (
IN CONST GUID *ResetSubtype
)
{
RESET_UTILITY_GUID_SPECIFIC_RESET_DATA ResetData;
ResetData.NullTerminator = CHAR_NULL;
CopyGuid (
(GUID *)((UINT8 *)&ResetData + OFFSET_OF (RESET_UTILITY_GUID_SPECIFIC_RESET_DATA, ResetSubtype)),
ResetSubtype
);
ResetPlatformSpecific (sizeof (ResetData), &ResetData);
}