void LCDWrite(uint8_t data,uint8_t rs)
{
/** rs = 0 instruction else data */
if (rs)
LCD_RS_PORT = 1; /** DATA */
else
LCD_RS_PORT = 0; /** INSTRUCTION */
/** 4 MSB bits */
if(data & 0x80) LCD_DATA3_PORT = 1;
if(data & 0x40) LCD_DATA2_PORT = 1;
if(data & 0x20) LCD_DATA1_PORT = 1;
if(data & 0x10) LCD_DATA0_PORT = 1 ;
toggleE();
Cpu_Delay100US(10);
LCD_DATA0_PORT = 0;
LCD_DATA1_PORT = 0;
LCD_DATA2_PORT = 0;
LCD_DATA3_PORT = 0;
/** 4 LSB bits */
if(data & 0x08) LCD_DATA3_PORT = 1;
if(data & 0x04) LCD_DATA2_PORT = 1;
if(data & 0x02) LCD_DATA1_PORT = 1;
if(data & 0x01) LCD_DATA0_PORT = 1;
toggleE();
Cpu_Delay100US(10);
LCD_DATA0_PORT = 0;
LCD_DATA1_PORT = 0;
LCD_DATA2_PORT = 0;
LCD_DATA3_PORT = 0;
}
void toggleE()
{
Cpu_Delay100US(1);
LCD_E_PORT = 1;
Cpu_Delay100US(1);
LCD_E_PORT = 0;
}
void LED_BrillarV(int a, word b){
int i;
for(i=0 ; i < a ; i++){
LED_PrenderV();
Cpu_Delay100US(b);
LED_ApagarV();
Cpu_Delay100US(b);
}
}
/******************************************************************************
* Function: void Check_USBBus_Status(void)
* Input: None
* Output: None
* Overview: This function can be used to detect if the USB bus has attached
* on USB bus, we can use a GPIO, or KBI interrupt, it is disable here
*
*****************************************************************************/
void Check_USBBus_Status(void)
{
if(CTL_USBEN == 0) /* module off ? */
{
EPCTL0 = 0x0D;
INTSTAT = 0xBF;
CTL = 0x00;
INTENB = 0x00; /* disable USB interrupt*/
CTL_USBEN = 0x01; /* enable module */
USBCTL0 = UCFG_VAL; /* attach to USB bus*/
Usb_Device_State = ATTACHED_STATE;
}
if(Usb_Device_State == ATTACHED_STATE)
{
INTSTAT = 0xBF; /*clear USB interrupts*/
INTENB = 0xBF;
Cpu_Delay100US(10000);
}
if(Usb_Device_State == USB_ENTER_SUSPEND)
{
USB_Suspend();
}
}
void main(void)
{
/*** Processor Expert internal initialization. DON'T REMOVE THIS CODE!!! ***/
PE_low_level_init();
/*** End of Processor Expert internal initialization. ***/
nLoop = 0;
SCIcount=0;
AD1_Start();
Puls1_Enable();
Puls2_Enable();
TI1_DisableEvent();
Cpu_Delay100US(10000);
if(!AD_Flag)
{
calibrateSensor();
TI1_EnableEvent();
AD_Flag = 1;
}
//----------------------------------------------------------------
for(;;)
{
nLoop ++;
if(nLoop >= LOOP_TIME)
nLoop = 0;
else
continue;
//----------------------------------------------------------------
if((g_fGyroscopeAngleIntegral < 50.0) && (g_fGyroscopeAngleIntegral > -50.0)) //ж╠а╒еп╤о
standFlag = 1;
else if((g_fGyroscopeAngleIntegral >= 50.0) || (g_fGyroscopeAngleIntegral <= -50.0))
standFlag = 0;
//----------------------------------------------------------------
Cpu_Delay100US(100);
if(UartFlag == 1)
{
sendData();
UartFlag = 0;
}
receiveData();
}
}
void delay_ms(U16 period) //delay routine (milliseconds)
{
while (period != 0)
{
Cpu_Delay100US (10);
period--;
}
}
void HopperScanID(void){
uint8_t i=0,j=0;
CleanBufferInput();
cctalk.FlagReceiveData=0;
for(i=3,j=0;i<20;i++){
if(HopperSimplePoll(i)){
cctalk.HopperAddress[j]=i;
j++;
}
Cpu_Delay100US(500);
cctalk.FlagReceiveData=0;
}
Cpu_Delay100US(100);
//i=0;
if(cctalk.HopperAddress[0]){
CleanBufferInput();
cctalk.FlagReceiveData=0;
cctalk.Hopper1FlagStatus = DEVICE_OK;
(void)HopperReqSerialNumber(cctalk.HopperAddress[0],cctalk.Hopper1SerialNumber);
}
if(cctalk.HopperAddress[1]){
CleanBufferInput();
cctalk.FlagReceiveData=0;
cctalk.Hopper2FlagStatus = DEVICE_OK;
(void)HopperReqSerialNumber(cctalk.HopperAddress[1],cctalk.Hopper2SerialNumber);
}
if(cctalk.HopperAddress[2]){
CleanBufferInput();
cctalk.FlagReceiveData=0;
cctalk.Hopper3FlagStatus = DEVICE_OK;
(void)HopperReqSerialNumber(cctalk.HopperAddress[2],cctalk.Hopper3SerialNumber);
}
}
void D4DLCD_Delay_ms_Common(unsigned short period) //delay routine (milliseconds)
{
#ifdef MQX_CPU
_time_delay(period);
#else
while (period != 0)
{
Cpu_Delay100US (10);
period--;
}
#endif
}
void LCDWriteChar(uint8_t data)
{
/*
if (data=='\n')
{
if (g_nCurrentLine >= LCD_LINES - 1)
lcd_setline(0);
else
lcd_setline(g_nCurrentLine+1);
}
else
*/
LCDWrite(data,1);
Cpu_Delay100US(20);
}
error SD_Escribir(byte *direccion, dato buf[][tam_dato]){
UINT32 u32SD_Block; // Convertimos la direccion en una variable de 32 bits
byte tem;
SPI_Init();
u32SD_Block = direccion[0];
u32SD_Block <<= 8;
u32SD_Block |= direccion[1];
u32SD_Block <<= 8;
u32SD_Block |= direccion[2];
u32SD_Block <<= 8;
u32SD_Block |= direccion[3];
tem = SD_WriteSector(u32SD_Block, (UINT8 *) buf);
(void)Cpu_Delay100US(100);
ban_SDvacia=0;
return _ERR_OK;
}
void LCDInitialize()
{
/** Set data direction on all pins to output */
LCD_DATA0_DD = 1;
LCD_DATA1_DD = 1;
LCD_DATA2_DD = 1;
LCD_DATA3_DD = 1;
LCD_RS_DD = 1;
LCD_E_DD = 1;
/** Delay for LCD to power up */
Cpu_Delay100US(160);
/** Set RS LOW */
LCD_RS_PORT = 0;
LCD_E_PORT = 0;
/** Set output to 0x3*/
LCDCommand(0x3);
/** 5 ms wait */
Cpu_Delay100US(50);
/** Set output to 0x3 again*/
LCDCommand(0x3);
Cpu_Delay100US(50);
LCDCommand(0x3);
Cpu_Delay100US(2);
/** Write 0x2 enable 4 bit mode*/
LCDCommand(0x2);
Cpu_Delay100US(20);
/** Set to 4 bit mode, 2 lines */
LCDCommand(0x28);
Cpu_Delay100US(20);
LCDCommand(0x8);
LCDCommand(0x01);
Cpu_Delay100US(20);
LCDCommand(0x0C);
}
error SD_Leer(byte *direccion, dato lectura[][tam_dato]){
UINT32 u32SD_Block; // Convertimos la direccion en una variable de 32 bits
SPI_Init();
u32SD_Block = direccion[0];
u32SD_Block <<= 8;
u32SD_Block |= direccion[1];
u32SD_Block <<= 8;
u32SD_Block |= direccion[2];
u32SD_Block <<= 8;
u32SD_Block |= direccion[3];
(void) SD_CalculaDireccion(dir_lectura, lectura);
(void) SD_ReadSector(u32SD_Block,(UINT8 *) lectura);
(void)Cpu_Delay100US(100);
//ban_bufferTx=0;
return _ERR_OK;
}
void main(void)
{
/* Write your local variable definition here */
long t=sizeof(byte*);
++t;
--t;
++g;
--g;
g=t;
/*** Processor Expert internal initialization. DON'T REMOVE THIS CODE!!! ***/
PE_low_level_init();
/*** End of Processor Expert internal initialization. ***/
/* Write your code here */
AS1_SendChar('a');
for(;1;){AS1_SendChar('a');Cpu_Delay100US(1000); }
/*** Processor Expert end of main routine. DON'T MODIFY THIS CODE!!! ***/
for(;;){}
/*** Processor Expert end of main routine. DON'T WRITE CODE BELOW!!! ***/
} /*** End of main routine. DO NOT MODIFY THIS TEXT!!! ***/
/*****************************************************************************
* void main(void)
*
* Main application.
*
* In: n/a
*
* Out: n/a
*****************************************************************************/
void main(void)
{
UInt16 state;
char *temp_ptr;
extern word _vba;
uint8_t sw0, sw1;
INTC_VBA = ((word)&_vba) >> (21-INTC_VBA_BITS); /* Set Vector Base Address */
/*** Processor Expert internal initialization. DON'T REMOVE THIS CODE!!! ***/
PE_low_level_init();
/*** End of Processor Expert internal initialization. ***/
/*StartDelay = pmem_read((unsigned int *)BOOT_START_DELAY_PLACE) & 0x00FF;
if(!StartDelay) bootExit();
else bootTimerInit();*/
/* Write your code here */
GPIO_A_PER &= ~GPIO_A_PER_PE0_MASK; // set to GPIO mode
GPIO_A_PER &= ~GPIO_A_PER_PE1_MASK;
GPIO_A_DDR |= GPIO_A_DDR_DD0_MASK; // set as output
GPIO_A_DDR |= GPIO_A_DDR_DD1_MASK;
GPIO_A_DR &= ~GPIO_A_DR_D0_MASK; // set low
GPIO_A_DR &= ~GPIO_A_DR_D1_MASK;
Cpu_Delay100US(5000); // power-up delay
// Initialize R0,R1,M01, and N for circular buffer (including shadows)
asm {
swap shadows ;// Switch to shadow registers
moveu.w #(RX_DATA_SIZE-1),M01 ;// Set buffer size
moveu.w #rx_data,R0 ;// Set starting address
moveu.w #QSCI_STAT,R1 ;// Use R1 for SCI status register
moveu.w #0,N ;// N is unused
swap shadows ;// Switch back to normal registers
}
// with DEFCON 17, we used a timer to keep the badge in bootloader mode on power up for 10 seconds
// for DEFCON 18, the bootloader mode is only enabled if both buttons are held down on power up
// otherwise it jumps directly to the user application. no timer necessary, so that code is commented out
// check buttons
GPIO_C_PUR |= GPIO_C_PUR_PU0_MASK; // enable pull-up
GPIO_C_PUR |= GPIO_C_PUR_PU1_MASK;
GPIO_C_DDR &= ~GPIO_C_DDR_DD0_MASK; // set as input
GPIO_C_DDR &= ~GPIO_C_DDR_DD1_MASK;
GPIO_C_PER &= ~GPIO_C_PER_PE0_MASK; // set to GPIO mode
GPIO_C_PER &= ~GPIO_C_PER_PE1_MASK;
Cpu_Delay100US(1000); // setup delay
#define SW0_PIN_MASK ((byte)1) /* Pin mask */
#define SW1_PIN_MASK ((byte)2) /* Pin mask */
sw0 = !((bool)(getRegBits(GPIO_C_RAWDATA,SW0_PIN_MASK)));
sw1 = !((bool)(getRegBits(GPIO_C_RAWDATA,SW1_PIN_MASK)));
if (sw0 || sw1) // one or more buttons has been pressed
{
Cpu_Delay100US(1000); // give the user time to press both buttons (also serves as 100mS debounce)
sw0 = !((bool)(getRegBits(GPIO_C_RAWDATA,SW0_PIN_MASK)));
sw1 = !((bool)(getRegBits(GPIO_C_RAWDATA,SW1_PIN_MASK)));
}
if (sw0 && sw1) // if both buttons have been pressed, enter bootloader
{
// Turn on LEDs so the user knows we're here
GPIO_A_DR |= GPIO_A_DR_D0_MASK; // set high
GPIO_A_DR |= GPIO_A_DR_D1_MASK;
// Initialize globals
mem_init(rx_data, NULL, RX_DATA_SIZE);
data_out = data_in = rx_data;
state = INITIAL_STATE;
temp_ptr = rx_data;
// Disable protection
setReg(FM_PROT,BOOT_PROT_VALUE);
// Output banner
sci_tx(&StrCopyright[0]);
// Now it is safe to enable interrupts
Cpu_EnableInt();
do {
// State: Initial State
if (state == INITIAL_STATE) {
status = 0;
sci_tx(&StrWaitingSrec[0]);
sci_tx_char(XON);
state = WAIT_FOR_S;
}
if (data_in != temp_ptr) {
//Timer_Disable();
// State: Wait for Header "S"
if (state == WAIT_FOR_S) {
temp_ptr = data_out;
if (get_char(&temp_ptr) == 'S') { state = WAIT_FOR_0; }
else { get_char(&data_out); }
}
// State: Wait for Header "0"
else if (state == WAIT_FOR_0) {
if (get_char(&temp_ptr) == '0') { state = WAIT_FOR_EOL; }
else {
get_char(&data_out);
state = WAIT_FOR_S;
}
}
// State: Wait for EOL
else if (state == WAIT_FOR_EOL) {
if (get_char(&temp_ptr) == '\r') {
if (!(status & TX_XOFF)) {
sci_tx_char(XOFF);
status |= TX_XOFF;
}
srec_decode();
temp_ptr = data_out;
}
}
}
else {
if (status & TX_XOFF) {
sci_tx_char(XON);
status &= ~TX_XOFF;
}
}
// State: Error
if (status & DOWNLOAD_ERROR) {
sci_tx(StrErr);
sci_tx(int_to_string(status));
state = INITIAL_STATE;
sci_tx(StrNewLine);
}
//bootTimerCheck();
} while (status != DOWNLOAD_OK);
sci_tx(StrNewLine);
sci_tx(&StrLoaded[0]);
}
bootExit();
}
void LCDHome()
{
LCDWrite(1, 0);
Cpu_Delay100US(5);
}
void LCDClear()
{
LCDWrite(0, 0);
Cpu_Delay100US(5);
}
void TaskccTalk(void){
static uint8_t FlagTurnDevice=0;
static uint8_t counter_events_coin_saved=0,coin_first_time=0;
static uint8_t counter_events_bill_saved=0;
uint8_t num_event;
uint8_t string[6]={0};
uint16_t time;
uint8_t x;
(void)EEPROM_GetPage(EEPROM_AREA_START);
(void)EEPROM_GetBytePage(ADDR_SYSTEM_MODE,&cctalk.FlagPoll);
(void)EEPROM_GetBytePage(ADDR_BILL_MODE,&cctalk.BillFlagMode);
if(cctalk.FlagPoll==1){
if(!coin_first_time){
(void)CoinAcceptorReadBufferedCreditErrorCodes();
counter_events_coin_saved=cctalk.CoinBufferErrorCredit[0];
(void)BillReadBufferedBillEvents();
counter_events_bill_saved=cctalk.BillBufferEvents[0];
coin_first_time=1;
}else{
//========================================================================//
if(cctalk.CoinBufferErrorCredit[0]!=counter_events_coin_saved){
num_event=cctalk.CoinBufferErrorCredit[0]-counter_events_coin_saved;
if(num_event>=1 && cctalk.CoinBufferErrorCredit[1]){
(void)CoinAcceptorReqCoinID(cctalk.CoinBufferErrorCredit[1],string);
dataprintf("CI",2);
dataprintf(string,6);
dataprintf("\r\n",2);
}
if(num_event>=2 && cctalk.CoinBufferErrorCredit[3]){
(void)CoinAcceptorReqCoinID(cctalk.CoinBufferErrorCredit[3],string);
dataprintf("CI",2);
dataprintf(string,6);
dataprintf("\r\n",2);
}
if(num_event>=3 && cctalk.CoinBufferErrorCredit[5]){
(void)CoinAcceptorReqCoinID(cctalk.CoinBufferErrorCredit[5],string);
dataprintf("CI",2);
dataprintf(string,6);
dataprintf("\r\n",2);
}
if(num_event>=4 && cctalk.CoinBufferErrorCredit[7]){
(void)CoinAcceptorReqCoinID(cctalk.CoinBufferErrorCredit[7],string);
dataprintf("CI",2);
dataprintf(string,6);
dataprintf("\r\n",2);
}
if(num_event==5 && cctalk.CoinBufferErrorCredit[9]){
(void)CoinAcceptorReqCoinID(cctalk.CoinBufferErrorCredit[9],string);
dataprintf("CI",2);
dataprintf(string,6);
dataprintf("\r\n",2);
}
counter_events_coin_saved = cctalk.CoinBufferErrorCredit[0];
}
//===========================================================================//
if(cctalk.BillBufferEvents[0]!=counter_events_bill_saved){
num_event=cctalk.BillBufferEvents[0]-counter_events_bill_saved;
if(num_event>=1 && cctalk.BillBufferEvents[1]){
if(cctalk.BillFlagMode){
//stacker automatically
if(cctalk.BufferInput[2]){
//send to stacker
if(cctalk.BillBufferEvents[1]==255 && !cctalk.BillBufferEvents[1+2] && cctalk.BillBufferEvents[1+3]==20){
(void)BillReqBarcode(cctalk.BillBarcode);
}
(void)BillRouteBill(1,&x);//send to stacker
}else{
//bill stacked
if(cctalk.BillBufferEvents[1]==255){
dataprintf("BC",2);
dataprintf(cctalk.BillBarcode,18);
}else{
(void)BillReqBillTypeID(cctalk.BillBufferEvents[1],string);
dataprintf("BI",2);
dataprintf(string,6);
dataprintf("ST",2);
}
dataprintf("\r\n",2);
}
}else{
//escrow mode
(void)BillReqBillTypeID(cctalk.BillBufferEvents[1],string);
dataprintf("BI",2);
dataprintf(string,6);
if(cctalk.BillBufferEvents[2]){
//escrow
dataprintf("ES",2);
}else{
dataprintf("ST",2);
}
dataprintf("\r\n",2);
}
}
if(num_event>=2 && cctalk.BillBufferEvents[3]){
if(cctalk.BillFlagMode){
//stacker automatically
if(cctalk.BufferInput[4]){//bill in escrow
//send to stacker
if(cctalk.BillBufferEvents[3]==255 && !cctalk.BillBufferEvents[3+2] && cctalk.BillBufferEvents[3+3]==20){
(void)BillReqBarcode(cctalk.BillBarcode);
}
(void)BillRouteBill(1,&x);//send to stacker
}else{
//bill stacked
if(cctalk.BillBufferEvents[3]==255){
dataprintf("BC",2);
dataprintf(cctalk.BillBarcode,18);
}else{
(void)BillReqBillTypeID(cctalk.BillBufferEvents[3],string);
dataprintf("BI",2);
dataprintf(string,6);
dataprintf("ST",2);
}
dataprintf("\r\n",2);
}
}else{
//escrow mode
(void)BillReqBillTypeID(cctalk.BillBufferEvents[3],string);
dataprintf("BI",2);
dataprintf(string,6);
if(cctalk.BillBufferEvents[4]){
//escrow
dataprintf("ES",2);
}else{
dataprintf("ST",2);
}
dataprintf("\r\n",2);
}
}
if(num_event>=3 && cctalk.BillBufferEvents[5]){
if(cctalk.BillFlagMode){
//stacker automatically
if(cctalk.BufferInput[6]){
//send to stacker
if(cctalk.BillBufferEvents[5]==255 && !cctalk.BillBufferEvents[5+2] && cctalk.BillBufferEvents[5+3]==20){
(void)BillReqBarcode(cctalk.BillBarcode);
}
(void)BillRouteBill(1,&x);//send to stacker
}else{
//bill stacked
if(cctalk.BillBufferEvents[5]==255){
dataprintf("BC",2);
dataprintf(cctalk.BillBarcode,18);
}else{
(void)BillReqBillTypeID(cctalk.BillBufferEvents[5],string);
dataprintf("BI",2);
dataprintf(string,6);
dataprintf("ST",2);
}
dataprintf("\r\n",2);
}
}else{
//escrow mode
(void)BillReqBillTypeID(cctalk.BillBufferEvents[5],string);
dataprintf("BI",2);
dataprintf(string,6);
if(cctalk.BillBufferEvents[6]){
//escrow
dataprintf("ES",2);
}else{
dataprintf("ST",2);
}
dataprintf("\r\n",2);
}
}
if(num_event>=4 && cctalk.BillBufferEvents[7]){
if(cctalk.BillFlagMode){
//stacker automatically
if(cctalk.BufferInput[8]){
//send to stacker
if(cctalk.BillBufferEvents[7]==255 && !cctalk.BillBufferEvents[7+2] && cctalk.BillBufferEvents[7+3]==20){
(void)BillReqBarcode(cctalk.BillBarcode);
}
(void)BillRouteBill(1,&x);//send to stacker
}else{
//bill stacked
if(cctalk.BillBufferEvents[7]==255){
dataprintf("BC",2);
dataprintf(cctalk.BillBarcode,18);
}else{
(void)BillReqBillTypeID(cctalk.BillBufferEvents[7],string);
dataprintf("BI",2);
dataprintf(string,6);
dataprintf("ST",2);
}
dataprintf("\r\n",2);
}
}else{
//escrow mode
(void)BillReqBillTypeID(cctalk.BillBufferEvents[7],string);
dataprintf("BI",2);
dataprintf(string,6);
if(cctalk.BillBufferEvents[8]){
//escrow
dataprintf("ES",2);
}else{
dataprintf("ST",2);
}
dataprintf("\r\n",2);
}
}
if(num_event>=5 && cctalk.BillBufferEvents[9]){
if(cctalk.BillFlagMode){
//stacker automatically
if(cctalk.BufferInput[10]){
//send to stacker
if(cctalk.BillBufferEvents[9]==255){
(void)BillReqBarcode(cctalk.BillBarcode);
}
(void)BillRouteBill(1,&x);//send to stacker
}else{
//bill stacked
if(cctalk.BillBufferEvents[9]==255){
dataprintf("BC",2);
dataprintf(cctalk.BillBarcode,18);
}else{
(void)BillReqBillTypeID(cctalk.BillBufferEvents[9],string);
dataprintf("BI",2);
dataprintf(string,6);
dataprintf("ST",2);
}
dataprintf("\r\n",2);
}
}else{
//escrow mode
(void)BillReqBillTypeID(cctalk.BillBufferEvents[9],string);
dataprintf("BI",2);
dataprintf(string,6);
if(cctalk.BillBufferEvents[10]){
//escrow
dataprintf("ES",2);
}else{
dataprintf("ST",2);
}
dataprintf("\r\n",2);
}
}
counter_events_coin_saved = cctalk.CoinBufferErrorCredit[0];
}
}
}
if(cctalk.FlagStatus){
cctalk.FlagStatus=0;
switch(FlagTurnDevice){
/////////////////////////////////////////////////////////
case 0:
if(cctalk.CoinFlagStatus!=DEVICE_NO_RESPONSE){
cctalk.CoinFlagThere=1;
(void)CoinAcceptorReadBufferedCreditErrorCodes();
}else{
//init coin acceptor
cctalk.CoinFlagThere=0;
if(CoinAcceptorPoll()){
cctalk.CoinFlagStatus = DEVICE_OK;
Cpu_Delay100US(100);
//request manufacturer
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)CoinAcceptorReqManufacturerID();
Cpu_Delay100US(100);
//request product code
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)CoinAcceptorReqProductCode();
Cpu_Delay100US(100);
//request serial number
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)CoinAcceptorReqSerialNumber();
Cpu_Delay100US(100);
//request software revision
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)CoinAcceptorReqSoftwareVersion();
Cpu_Delay100US(100);
//request option flags
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)CoinAcceptorReqOptionFlags();
Cpu_Delay100US(100);
//modify inhibit status
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)CoinAcceptorModInhibitStatus(0xffff);
Cpu_Delay100US(100);
//modify master inhibit status
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)CoinAcceptorModMasterInhibitStatus(1);
Cpu_Delay100US(100);
}
}
FlagTurnDevice=1;
break;
////////////////////////////////////////////////////////
case 1:
if(cctalk.Hopper1FlagStatus!=DEVICE_NO_RESPONSE){
cctalk.Hopper1FlagThere=1;
if(cctalk.Hopper1FlagStatus == DEVICE_OK){
(void)HopperSimplePoll(3);
}
if(cctalk.Hopper1FlagStatus == DEVICE_PAYOUT){
if(HopperReqStatus(3,&cctalk.Hopper1CounterPay,&cctalk.Hopper1CoinsPendent,&cctalk.Hopper1CoinsPayOut,&cctalk.Hopper1UnPay)){
(void)FC_HOPPER_GetTimeMS(&time);
if((cctalk.Hopper1CoinsPayOut == cctalk.HopperCoinsToPay) && time>8500){
UTIL_Num8uToStr(string,3,cctalk.Hopper1CounterPay);
dataprintf("CTP",3);
dataprintf(string,3);
UTIL_Num8uToStr(string,3,cctalk.Hopper1CoinsPendent);
dataprintf("CPD",3);
dataprintf(string,3);
UTIL_Num8uToStr(string,3,cctalk.Hopper1CoinsPayOut);
dataprintf("CPY",3);
dataprintf(string,3);
UTIL_Num8uToStr(string,3,cctalk.Hopper1UnPay);
dataprintf("CUP",3);
dataprintf(string,3);
dataprintf("\r\n",2);
}
}
(void)HopperReqTestHopper(3,&cctalk.Hopper1Test);
}
}else{
cctalk.Hopper1FlagThere=0;
if(HopperSimplePoll(3)){
cctalk.HopperAddress[0]=3;
CleanBufferInput();
cctalk.FlagReceiveData=0;
cctalk.Hopper1FlagStatus = DEVICE_OK;
(void)HopperReqSerialNumber(3,cctalk.Hopper1SerialNumber);
}
}
FlagTurnDevice=2;
break;
/////////////////////////////////////////////////////////
case 2:
if(cctalk.Hopper2FlagStatus!=DEVICE_NO_RESPONSE){
cctalk.Hopper2FlagThere=1;
if(cctalk.Hopper2FlagStatus == DEVICE_OK){
(void)HopperSimplePoll(4);
}
if(cctalk.Hopper2FlagStatus == DEVICE_PAYOUT){
if(HopperReqStatus(4,&cctalk.Hopper2CounterPay,&cctalk.Hopper2CoinsPendent,&cctalk.Hopper2CoinsPayOut,&cctalk.Hopper2UnPay)){
(void)FC_HOPPER_GetTimeMS(&time);
if((cctalk.Hopper2CoinsPayOut == cctalk.HopperCoinsToPay) && time>8500){
UTIL_Num8uToStr(string,3,cctalk.Hopper2CounterPay);
dataprintf("CTP",3);
dataprintf(string,3);
UTIL_Num8uToStr(string,3,cctalk.Hopper2CoinsPendent);
dataprintf("CPD",3);
dataprintf(string,3);
UTIL_Num8uToStr(string,3,cctalk.Hopper2CoinsPayOut);
dataprintf("CPY",3);
dataprintf(string,3);
UTIL_Num8uToStr(string,3,cctalk.Hopper2UnPay);
dataprintf("CUP",3);
dataprintf(string,3);
dataprintf("\r\n",2);
}
}
(void)HopperReqTestHopper(4,&cctalk.Hopper2Test);
}
}else{
cctalk.Hopper2FlagThere=0;
if(HopperSimplePoll(4)){
cctalk.HopperAddress[1]=4;
CleanBufferInput();
cctalk.FlagReceiveData=0;
cctalk.Hopper2FlagStatus = DEVICE_OK;
(void)HopperReqSerialNumber(4,cctalk.Hopper2SerialNumber);
}
}
FlagTurnDevice=3;
break;
////////////////////////////////////////////////////////
case 3:
if(cctalk.Hopper3FlagStatus!=DEVICE_NO_RESPONSE){
cctalk.Hopper3FlagThere=1;
if(cctalk.Hopper3FlagStatus == DEVICE_OK){
(void)HopperSimplePoll(5);
}
if(cctalk.Hopper3FlagStatus == DEVICE_PAYOUT){
if(HopperReqStatus(5,&cctalk.Hopper3CounterPay,&cctalk.Hopper3CoinsPendent,&cctalk.Hopper3CoinsPayOut,&cctalk.Hopper3UnPay)){
(void)FC_HOPPER_GetTimeMS(&time);
if((cctalk.Hopper3CoinsPayOut == cctalk.HopperCoinsToPay) && time>8500){
UTIL_Num8uToStr(string,3,cctalk.Hopper3CounterPay);
dataprintf("CTP",3);
dataprintf(string,3);
UTIL_Num8uToStr(string,3,cctalk.Hopper3CoinsPendent);
dataprintf("CPD",3);
dataprintf(string,3);
UTIL_Num8uToStr(string,3,cctalk.Hopper3CoinsPayOut);
dataprintf("CPY",3);
dataprintf(string,3);
UTIL_Num8uToStr(string,3,cctalk.Hopper3UnPay);
dataprintf("CUP",3);
dataprintf(string,3);
dataprintf("\r\n",2);
}
}
(void)HopperReqTestHopper(5,&cctalk.Hopper3Test);
}
}else{
cctalk.Hopper3FlagThere=0;
if(HopperSimplePoll(5)){
cctalk.HopperAddress[2]=5;
CleanBufferInput();
cctalk.FlagReceiveData=0;
cctalk.Hopper3FlagStatus = DEVICE_OK;
(void)HopperReqSerialNumber(5,cctalk.Hopper3SerialNumber);
}
}
FlagTurnDevice=4;
break;
///////////////////////////////////////////////////
case 4:
if(cctalk.BillFlagStatus!=DEVICE_NO_RESPONSE){
cctalk.BillFlagThere=1;
(void)BillReadBufferedBillEvents();
}else{
cctalk.BillFlagThere=0;
if(BillPoll()){
cctalk.BillFlagStatus = DEVICE_OK;
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)BillReqProductCode();
Cpu_Delay100US(100);
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)BillReqManufacturerID();
Cpu_Delay100US(100);
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)BillReqSerialNumber();
Cpu_Delay100US(100);
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)BillModBillOperatingMode(3);
Cpu_Delay100US(100);
CleanBufferInput();
cctalk.FlagReceiveData=0;
(void)BillModMasterInhibitStatus(1);
}
}
FlagTurnDevice=0;
break;
}
}
}