/**
* This sets up the receive Descriptor queue in ring or chain mode.
* This function is tightly coupled to the platform and operating system
* Device is interested only after the descriptors are setup. Therefore this function
* is not included in the device driver API. This function should be treated as an
* example code to design the descriptor structures in ring mode or chain mode.
* This function depends on the pcidev structure for allocation of consistent dma-able memory in
* case of linux.
* This limitation is due to the fact that linux uses pci structure to allocate a dmable memory
* - Allocates the memory for the descriptors.
* - Initialize the Busy and Next descriptors indices to 0(Indicating first descriptor).
* - Initialize the Busy and Next descriptors to first descriptor address.
* - Initialize the last descriptor with the endof ring in case of ring mode.
* - Initialize the descriptors in chain mode.
* @param[in] pointer to synopGMACdevice.
* @param[in] pointer to pci_device structure.
* @param[in] number of descriptor expected in rx descriptor queue.
* @param[in] whether descriptors to be created in RING mode or CHAIN mode.
* \return 0 upon success. Error code upon failure.
* \note This function fails if allocation fails for required number of descriptors in Ring mode,
* but in chain mode
* function returns -ESYNOPGMACNOMEM in the process of descriptor chain creation. once returned from
* this function
* user should for gmacdev->RxDescCount to see how many descriptors are there in the chain. Should
* continue further
* only if the number of descriptors in the chain meets the requirements
*/
s32 synopGMAC_setup_rx_desc_queue(synopGMACdevice * gmacdev,u32 no_of_desc, u32 desc_mode)
{
s32 i;
DmaDesc * bf1;
DmaDesc *first_desc = NULL;
dma_addr_t dma_addr;
gmacdev->RxDescCount = 0;
first_desc =(DmaDesc *)plat_alloc_consistent_dmaable_memory (gmacdev, sizeof(DmaDesc) * no_of_desc, &dma_addr);
if(first_desc == NULL){
rt_kprintf("Error in Rx Descriptor Memory allocation in Ring mode\n");
return -ESYNOPGMACNOMEM;
}
DEBUG_MES("rx_first_desc_addr = %p\n", first_desc);
DEBUG_MES("dmaadr = %p\n", dma_addr);
gmacdev->RxDescCount = no_of_desc;
gmacdev->RxDesc = (DmaDesc *)first_desc;
gmacdev->RxDescDma = dma_addr;
for(i =0; i < gmacdev->RxDescCount; i++){
synopGMAC_rx_desc_init_ring(gmacdev->RxDesc + i, i == gmacdev->RxDescCount-1);
}
gmacdev->RxNext = 0;
gmacdev->RxBusy = 0;
gmacdev->RxNextDesc = gmacdev->RxDesc;
gmacdev->RxBusyDesc = gmacdev->RxDesc;
gmacdev->BusyRxDesc = 0;
return -ESYNOPGMACNOERR;
}
static int rtl88e1111_config_init(synopGMACdevice *gmacdev)
{
int retval, err;
u16 data;
DEBUG_MES("in %s\n", __FUNCTION__);
synopGMAC_read_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x14,&data);
data = data | 0x82;
err = synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x14,data);
synopGMAC_read_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x00,&data);
data = data | 0x8000;
err = synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x00,data);
#if SYNOP_PHY_LOOPBACK
synopGMAC_read_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x14,&data);
data = data | 0x70;
data = data & 0xffdf;
err = synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x14,data);
data = 0x8000;
err = synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x00,data);
data = 0x5140;
err = synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x00,data);
#endif
if (err < 0)
return err;
return 0;
}
/**
* This sets up the transmit Descriptor queue in ring or chain mode.
* This function is tightly coupled to the platform and operating system
* Device is interested only after the descriptors are setup. Therefore this function
* is not included in the device driver API. This function should be treated as an
* example code to design the descriptor structures for ring mode or chain mode.
* This function depends on the pcidev structure for allocation consistent dma-able memory in case
* of linux.
* This limitation is due to the fact that linux uses pci structure to allocate a dmable memory
* - Allocates the memory for the descriptors.
* - Initialize the Busy and Next descriptors indices to 0(Indicating first descriptor).
* - Initialize the Busy and Next descriptors to first descriptor address.
* - Initialize the last descriptor with the endof ring in case of ring mode.
* - Initialize the descriptors in chain mode.
* @param[in] pointer to synopGMACdevice.
* @param[in] pointer to pci_device structure.
* @param[in] number of descriptor expected in tx descriptor queue.
* @param[in] whether descriptors to be created in RING mode or CHAIN mode.
* \return 0 upon success. Error code upon failure.
* \note This function fails if allocation fails for required number of descriptors in Ring mode,
* but in chain mode
* function returns -ESYNOPGMACNOMEM in the process of descriptor chain creation. once returned from
* this function
* user should for gmacdev->TxDescCount to see how many descriptors are there in the chain. Should
* continue further
* only if the number of descriptors in the chain meets the requirements
*/
s32 synopGMAC_setup_tx_desc_queue(synopGMACdevice *gmacdev, u32 no_of_desc, u32 desc_mode)
{
s32 i;
DmaDesc *bf1;
DmaDesc *first_desc = NULL;
dma_addr_t dma_addr;
gmacdev->TxDescCount = 0;
first_desc = (DmaDesc *)plat_alloc_consistent_dmaable_memory(gmacdev, sizeof(DmaDesc) * no_of_desc, &dma_addr);
if (first_desc == NULL)
{
rt_kprintf("Error in Tx Descriptors memory allocation\n");
return -ESYNOPGMACNOMEM;
}
DEBUG_MES("tx_first_desc_addr = %p\n", first_desc);
DEBUG_MES("dmaadr = %p\n", dma_addr);
gmacdev->TxDescCount = no_of_desc;
gmacdev->TxDesc = first_desc;
gmacdev->TxDescDma = dma_addr;
for (i = 0; i < gmacdev->TxDescCount; i++)
{
synopGMAC_tx_desc_init_ring(gmacdev->TxDesc + i, i == gmacdev->TxDescCount - 1);
#if SYNOP_TOP_DEBUG
rt_kprintf("\n%02d %08x \n", i, (unsigned int)(gmacdev->TxDesc + i));
rt_kprintf("%08x ", (unsigned int)((gmacdev->TxDesc + i))->status);
rt_kprintf("%08x ", (unsigned int)((gmacdev->TxDesc + i)->length));
rt_kprintf("%08x ", (unsigned int)((gmacdev->TxDesc + i)->buffer1));
rt_kprintf("%08x ", (unsigned int)((gmacdev->TxDesc + i)->buffer2));
rt_kprintf("%08x ", (unsigned int)((gmacdev->TxDesc + i)->data1));
rt_kprintf("%08x ", (unsigned int)((gmacdev->TxDesc + i)->data2));
rt_kprintf("%08x ", (unsigned int)((gmacdev->TxDesc + i)->dummy1));
rt_kprintf("%08x ", (unsigned int)((gmacdev->TxDesc + i)->dummy2));
#endif
}
gmacdev->TxNext = 0;
gmacdev->TxBusy = 0;
gmacdev->TxNextDesc = gmacdev->TxDesc;
gmacdev->TxBusyDesc = gmacdev->TxDesc;
gmacdev->BusyTxDesc = 0;
return -ESYNOPGMACNOERR;
}
void eth_rx_irq(int irqno,void *param)
{
struct rt_eth_dev *dev = ð_dev;
struct synopGMACNetworkAdapter *adapter = dev->priv;
//DEBUG_MES("in irq!!\n");
#ifdef RT_USING_GMAC_INT_MODE
int i ;
for(i = 0; i < 7200; i++)
;
#endif /*RT_USING_GMAC_INT_MODE*/
synopGMACdevice * gmacdev = (synopGMACdevice *)adapter->synopGMACdev;
u32 interrupt,dma_status_reg;
s32 status;
u32 dma_addr;
//rt_kprintf("irq i = %d\n", i++);
dma_status_reg = synopGMACReadReg(gmacdev->DmaBase, DmaStatus);
if(dma_status_reg == 0)
{
rt_kprintf("dma_status ==0 \n");
return;
}
//rt_kprintf("dma_status_reg is 0x%x\n", dma_status_reg);
u32 gmacstatus;
synopGMAC_disable_interrupt_all(gmacdev);
gmacstatus = synopGMACReadReg(gmacdev->MacBase,GmacStatus);
if(dma_status_reg & GmacPmtIntr){
rt_kprintf("%s:: Interrupt due to PMT module\n",__FUNCTION__);
//synopGMAC_linux_powerup_mac(gmacdev);
}
if(dma_status_reg & GmacMmcIntr){
rt_kprintf("%s:: Interrupt due to MMC module\n",__FUNCTION__);
DEBUG_MES("%s:: synopGMAC_rx_int_status = %08x\n",__FUNCTION__,synopGMAC_read_mmc_rx_int_status(gmacdev));
DEBUG_MES("%s:: synopGMAC_tx_int_status = %08x\n",__FUNCTION__,synopGMAC_read_mmc_tx_int_status(gmacdev));
}
if(dma_status_reg & GmacLineIntfIntr){
rt_kprintf("%s:: Interrupt due to GMAC LINE module\n",__FUNCTION__);
}
interrupt = synopGMAC_get_interrupt_type(gmacdev);
//rt_kprintf("%s:Interrupts to be handled: 0x%08x\n",__FUNCTION__,interrupt);
if(interrupt & synopGMACDmaError){
u8 mac_addr0[6];
rt_kprintf("%s::Fatal Bus Error Inetrrupt Seen\n",__FUNCTION__);
memcpy(mac_addr0,dev->dev_addr,6);
synopGMAC_disable_dma_tx(gmacdev);
synopGMAC_disable_dma_rx(gmacdev);
synopGMAC_take_desc_ownership_tx(gmacdev);
synopGMAC_take_desc_ownership_rx(gmacdev);
synopGMAC_init_tx_rx_desc_queue(gmacdev);
synopGMAC_reset(gmacdev);
synopGMAC_set_mac_addr(gmacdev,GmacAddr0High,GmacAddr0Low, mac_addr0);
synopGMAC_dma_bus_mode_init(gmacdev,DmaFixedBurstEnable| DmaBurstLength8 | DmaDescriptorSkip2 );
synopGMAC_dma_control_init(gmacdev,DmaStoreAndForward);
synopGMAC_init_rx_desc_base(gmacdev);
synopGMAC_init_tx_desc_base(gmacdev);
synopGMAC_mac_init(gmacdev);
synopGMAC_enable_dma_rx(gmacdev);
synopGMAC_enable_dma_tx(gmacdev);
}
if(interrupt & synopGMACDmaRxNormal){
//DEBUG_MES("%s:: Rx Normal \n", __FUNCTION__);
//synop_handle_received_data(netdev);
eth_device_ready(ð_dev.parent);
}
if(interrupt & synopGMACDmaRxAbnormal){
//rt_kprintf("%s::Abnormal Rx Interrupt Seen\n",__FUNCTION__);
if(GMAC_Power_down == 0){
adapter->synopGMACNetStats.rx_over_errors++;
synopGMACWriteReg(gmacdev->DmaBase, DmaStatus ,0x80);
synopGMAC_resume_dma_rx(gmacdev);
}
}
if(interrupt & synopGMACDmaRxStopped){
rt_kprintf("%s::Receiver stopped seeing Rx interrupts\n",__FUNCTION__); //Receiver gone in to stopped state
}
if(interrupt & synopGMACDmaTxNormal){
DEBUG_MES("%s::Finished Normal Transmission \n",__FUNCTION__);
// synop_handle_transmit_over(netdev);
}
if(interrupt & synopGMACDmaTxAbnormal){
rt_kprintf("%s::Abnormal Tx Interrupt Seen\n",__FUNCTION__);
}
if(interrupt & synopGMACDmaTxStopped){
TR("%s::Transmitter stopped sending the packets\n",__FUNCTION__);
if(GMAC_Power_down == 0){ // If Mac is not in powerdown
synopGMAC_disable_dma_tx(gmacdev);
synopGMAC_take_desc_ownership_tx(gmacdev);
synopGMAC_enable_dma_tx(gmacdev);
// netif_wake_queue(netdev);
TR("%s::Transmission Resumed\n",__FUNCTION__);
}
}
/* Enable the interrrupt before returning from ISR*/
synopGMAC_enable_interrupt(gmacdev,DmaIntEnable);
return;
}
struct pbuf *rt_eth_rx(rt_device_t device)
{
DEBUG_MES("%s : \n", __FUNCTION__);
struct rt_eth_dev *dev = ð_dev;
struct synopGMACNetworkAdapter *adapter;
synopGMACdevice * gmacdev;
// struct PmonInet * pinetdev;
s32 desc_index;
int i;
char * ptr;
u32 bf1;
u32 data1;
u32 data2;
u32 len;
u32 status;
u32 dma_addr1;
u32 dma_addr2;
struct pbuf *pbuf = RT_NULL;
rt_sem_take(&sem_lock, RT_WAITING_FOREVER);
adapter = (struct synopGMACNetworkAdapter *) dev->priv;
if(adapter == NULL){
rt_kprintf("%S : Unknown Device !!\n", __FUNCTION__);
return NULL;
}
gmacdev = (synopGMACdevice *) adapter->synopGMACdev;
if(gmacdev == NULL){
rt_kprintf("%s : GMAC device structure is missing\n", __FUNCTION__);
return NULL;
}
/*Handle the Receive Descriptors*/
// do{
desc_index = synopGMAC_get_rx_qptr(gmacdev, &status,&dma_addr1,NULL, &data1,&dma_addr2,NULL,&data2);
if(desc_index >= 0 && data1 != 0){
DEBUG_MES("Received Data at Rx Descriptor %d for skb 0x%08x whose status is %08x\n",desc_index,dma_addr1,status);
if(synopGMAC_is_rx_desc_valid(status)||SYNOP_PHY_LOOPBACK)
{
pbuf = pbuf_alloc(PBUF_LINK, MAX_ETHERNET_PAYLOAD, PBUF_RAM);
if(pbuf == 0) rt_kprintf("===error in pbuf_alloc\n");
dma_addr1 = plat_dma_map_single(gmacdev,(void*)data1,RX_BUF_SIZE);
len = synopGMAC_get_rx_desc_frame_length(status); //Not interested in Ethernet CRC bytes
rt_memcpy( pbuf->payload, (char *)data1, len);
DEBUG_MES("==get pkg len: %d\n",len);
}
else
{
rt_kprintf("s: %08x\n",status);
adapter->synopGMACNetStats.rx_errors++;
adapter->synopGMACNetStats.collisions += synopGMAC_is_rx_frame_collision(status);
adapter->synopGMACNetStats.rx_crc_errors += synopGMAC_is_rx_crc(status);
adapter->synopGMACNetStats.rx_frame_errors += synopGMAC_is_frame_dribbling_errors(status);
adapter->synopGMACNetStats.rx_length_errors += synopGMAC_is_rx_frame_length_errors(status);
}
desc_index = synopGMAC_set_rx_qptr(gmacdev,dma_addr1, RX_BUF_SIZE, (u32)data1,0,0,0);
if(desc_index < 0){
#if SYNOP_RX_DEBUG
rt_kprintf("Cannot set Rx Descriptor for data1 %08x\n",(u32)data1);
#endif
plat_free_memory((void *)data1);
}
}
// }while(desc_index >= 0);
rt_sem_release(&sem_lock);
DEBUG_MES("%s : before return \n", __FUNCTION__);
return pbuf;
}
rt_err_t rt_eth_tx(rt_device_t device, struct pbuf* p)
{
/* lock eth device */
rt_sem_take(&sem_lock, RT_WAITING_FOREVER);
DEBUG_MES("in %s\n", __FUNCTION__);
s32 status;
u32 pbuf;
u64 dma_addr;
u32 offload_needed = 0;
u32 index;
DmaDesc * dpr;
struct rt_eth_dev *dev = (struct rt_eth_dev *) device;
struct synopGMACNetworkAdapter *adapter;
synopGMACdevice * gmacdev;
adapter = (struct synopGMACNetworkAdapter *) dev->priv;
if(adapter == NULL)
return -1;
gmacdev = (synopGMACdevice *) adapter->synopGMACdev;
if(gmacdev == NULL)
return -1;
if(!synopGMAC_is_desc_owned_by_dma(gmacdev->TxNextDesc))
{
pbuf = (u32)plat_alloc_memory(p->len);
//pbuf = (u32)pbuf_alloc(PBUF_LINK, p->len, PBUF_RAM);
if(pbuf == 0)
{
rt_kprintf("===error in alloc bf1\n");
return -1;
}
DEBUG_MES("p->len = %d\n", p->len);
memcpy((void *)pbuf, p->payload, p->len);
dma_addr = plat_dma_map_single(gmacdev,(void*)pbuf,p->len);
status = synopGMAC_set_tx_qptr(gmacdev,dma_addr,p->len,pbuf,0,0,0,offload_needed,&index,dpr);
if(status < 0){
rt_kprintf("%s No More Free Tx Descriptors\n",__FUNCTION__);
plat_free_memory((void *)pbuf);
return -16;
}
}
synopGMAC_resume_dma_tx(gmacdev);
s32 desc_index;
u32 data1, data2;
u32 dma_addr1, dma_addr2;
u32 length1, length2;
#ifdef ENH_DESC_8W
u32 ext_status;
u16 time_stamp_higher;
u32 time_stamp_high;
u32 time_stamp_low;
#endif
do {
#ifdef ENH_DESC_8W
desc_index = synopGMAC_get_tx_qptr(gmacdev, &status, &dma_addr1, &length1, &data1, &dma_addr2, &length2, &data2,&ext_status,&time_stamp_high,&time_stamp_low);
synopGMAC_TS_read_timestamp_higher_val(gmacdev, &time_stamp_higher);
#else
desc_index = synopGMAC_get_tx_qptr(gmacdev, &status, &dma_addr1, &length1, &data1, &dma_addr2, &length2, &data2);
#endif
if(desc_index >= 0 && data1 != 0){
#ifdef IPC_OFFLOAD
if(synopGMAC_is_tx_ipv4header_checksum_error(gmacdev, status)){
rt_kprintf("Harware Failed to Insert IPV4 Header Checksum\n");
}
if(synopGMAC_is_tx_payload_checksum_error(gmacdev, status)){
rt_kprintf("Harware Failed to Insert Payload Checksum\n");
}
#endif
plat_free_memory((void *)(data1)); //sw: data1 = buffer1
if(synopGMAC_is_desc_valid(status)){
adapter->synopGMACNetStats.tx_bytes += length1;
adapter->synopGMACNetStats.tx_packets++;
}
else {
adapter->synopGMACNetStats.tx_errors++;
adapter->synopGMACNetStats.tx_aborted_errors += synopGMAC_is_tx_aborted(status);
adapter->synopGMACNetStats.tx_carrier_errors += synopGMAC_is_tx_carrier_error(status);
}
} adapter->synopGMACNetStats.collisions += synopGMAC_get_tx_collision_count(status);
} while(desc_index >= 0);
/* unlock eth device */
rt_sem_release(&sem_lock);
// rt_kprintf("output %d bytes\n", p->len);
u32 test_data;
test_data = synopGMACReadReg(gmacdev->DmaBase, DmaStatus);
return RT_EOK;
}
static rt_err_t eth_init(rt_device_t device )
{
struct eth_device *eth_device = (struct eth_device *)device;
RT_ASSERT(eth_device != RT_NULL);
s32 ijk;
s32 status = 0;
u64 dma_addr;
u32 Mac_changed = 0;
struct pbuf *pbuf;
u8 macaddr[6] = DEFAULT_MAC_ADDRESS;
struct rt_eth_dev *dev = ð_dev;
struct synopGMACNetworkAdapter *adapter = dev->priv;
synopGMACdevice * gmacdev = (synopGMACdevice *)adapter->synopGMACdev;
synopGMAC_reset(gmacdev);
synopGMAC_attach(gmacdev,(regbase + MACBASE),(regbase + DMABASE), DEFAULT_PHY_BASE, macaddr);
synopGMAC_read_version(gmacdev);
synopGMAC_set_mdc_clk_div(gmacdev,GmiiCsrClk3);
gmacdev->ClockDivMdc = synopGMAC_get_mdc_clk_div(gmacdev);
init_phy(adapter->synopGMACdev);
rt_kprintf("tx desc_queue\n");
synopGMAC_setup_tx_desc_queue(gmacdev,TRANSMIT_DESC_SIZE, RINGMODE);
synopGMAC_init_tx_desc_base(gmacdev);
rt_kprintf("rx desc_queue\n");
synopGMAC_setup_rx_desc_queue(gmacdev,RECEIVE_DESC_SIZE, RINGMODE);
synopGMAC_init_rx_desc_base(gmacdev);
DEBUG_MES("DmaRxBaseAddr = %08x\n",synopGMACReadReg(gmacdev->DmaBase,DmaRxBaseAddr));
// u32 dmaRx_Base_addr = synopGMACReadReg(gmacdev->DmaBase,DmaRxBaseAddr);
// rt_kprintf("first_desc_addr = 0x%x\n", dmaRx_Base_addr);
#ifdef ENH_DESC_8W
synopGMAC_dma_bus_mode_init(gmacdev, DmaBurstLength32 | DmaDescriptorSkip2 | DmaDescriptor8Words );
#else
//synopGMAC_dma_bus_mode_init(gmacdev, DmaBurstLength4 | DmaDescriptorSkip1);
synopGMAC_dma_bus_mode_init(gmacdev, DmaBurstLength4 | DmaDescriptorSkip2);
#endif
synopGMAC_dma_control_init(gmacdev,DmaStoreAndForward |DmaTxSecondFrame|DmaRxThreshCtrl128);
status = synopGMAC_check_phy_init(adapter);
synopGMAC_mac_init(gmacdev);
synopGMAC_pause_control(gmacdev);
#ifdef IPC_OFFLOAD
synopGMAC_enable_rx_chksum_offload(gmacdev);
synopGMAC_rx_tcpip_chksum_drop_enable(gmacdev);
#endif
u32 skb;
do{
skb = (u32)plat_alloc_memory(RX_BUF_SIZE); //should skb aligned here?
if(skb == RT_NULL){
rt_kprintf("ERROR in skb buffer allocation\n");
break;
}
dma_addr = plat_dma_map_single(gmacdev,(void *)skb,RX_BUF_SIZE); //获取 skb 的 dma 地址
status = synopGMAC_set_rx_qptr(gmacdev,dma_addr,RX_BUF_SIZE,(u32)skb,0,0,0);
if(status < 0)
{
rt_kprintf("status < 0!!\n");
plat_free_memory((void *)skb);
}
}while(status >= 0 && (status < (RECEIVE_DESC_SIZE - 1)));
synopGMAC_clear_interrupt(gmacdev);
synopGMAC_disable_mmc_tx_interrupt(gmacdev, 0xFFFFFFFF);
synopGMAC_disable_mmc_rx_interrupt(gmacdev, 0xFFFFFFFF);
synopGMAC_disable_mmc_ipc_rx_interrupt(gmacdev, 0xFFFFFFFF);
// synopGMAC_disable_interrupt_all(gmacdev);
synopGMAC_enable_interrupt(gmacdev, DmaIntEnable);
synopGMAC_enable_dma_rx(gmacdev);
synopGMAC_enable_dma_tx(gmacdev);
plat_delay(DEFAULT_LOOP_VARIABLE);
synopGMAC_check_phy_init(adapter);
synopGMAC_mac_init(gmacdev);
rt_timer_init(&dev->link_timer, "link_timer",
synopGMAC_linux_cable_unplug_function,
(void *)adapter,
RT_TICK_PER_SECOND,
RT_TIMER_FLAG_PERIODIC);
rt_timer_start(&dev->link_timer);
#ifdef RT_USING_GMAC_INT_MODE
/* installl isr */
DEBUG_MES("%s\n", __FUNCTION__);
rt_hw_interrupt_install(LS1C_MAC_IRQ, eth_rx_irq, RT_NULL, "e0_isr");
rt_hw_interrupt_umask(LS1C_MAC_IRQ);
#else
rt_timer_init(&dev->rx_poll_timer, "rx_poll_timer",
eth_rx_irq,
(void *)adapter,
1,
RT_TIMER_FLAG_PERIODIC);
rt_timer_start(&dev->rx_poll_timer);
#endif /*RT_USING_GMAC_INT_MODE*/
rt_kprintf("eth_inited!\n");
return RT_EOK;
}
