VOS_UINT32 OM_AcpuEstablishReq(APP_OM_MSG_EX_STRU *pstAppToOmMsg,
VOS_UINT16 usReturnPrimId)
{
VOS_UINT32 ulRet;
#if (FEATURE_ON == FEATURE_CBT_LOG)
VOS_UINT32 ulState;
ulState = g_ulAcpuOMSwitchOnOff;
#endif
VOS_MemSet(&g_stAcpuTraceEventConfig, 0, sizeof(OM_TRACE_EVENT_CONFIG_PS_STRU));
VOS_MemSet(g_astOmPrintfOutPutLev, 0, OM_PRINTF_MODULE_MAX_NUM*sizeof(LOG_LEVEL_EN));
VOS_MemSet(g_aulLogPrintLevPsTable, 0, LOG_PS_MODULE_MAX_NUM*sizeof(LOG_LEVEL_EN));
VOS_MemSet(g_aulLogPrintLevDrvTable, 0, LOG_DRV_MODULE_MAX_NUM*sizeof(LOG_LEVEL_EN));
/* 先断开链路 */
g_ulAcpuOMSwitchOnOff = OM_STATE_IDLE;
#if(FEATURE_ON == FEATURE_SOCP_ON_DEMAND)
OM_AcpuSocpVoteInfoAdd(OM_SOCPVOTE_CALLBEGIN);
DRV_SOCP_VOTE(SOCP_VOTE_GU_OM_APP, SOCP_VOTE_FOR_WAKE);
OM_AcpuSocpVoteInfoAdd(OM_SOCPVOTE_CALLEND);
#endif
/* 以兼容校准工具，建链成功回复状态字0x02 */
ulRet = 0x02;
/* 给工具回复建链成功状态 */
OM_AcpuSendResult(OM_QUERY_FUNC, ulRet, usReturnPrimId);
/* 激活链路 */
g_ulAcpuOMSwitchOnOff = OM_STATE_ACTIVE;
#if (FEATURE_ON == FEATURE_CBT_LOG)
if ((OM_STATE_ACTIVE == ulState) && (OM_CBT_LOG_ENABLE_FLAG == g_ulCBTLogEnable))
{
return VOS_OK;
}
#endif
/* 通知CCPU链路状态 */
if(VOS_OK != GU_OamSndPcMsgToCcpu((VOS_UINT8*)pstAppToOmMsg, sizeof(APP_OM_MSG_EX_STRU)))
{
/* 打印错误 */
LogPrint("OM_AcpuEstablishReq: The ICC UDI Write is Error.\n");
}
return VOS_OK;
}
VOS_UINT32 OM_AcpuCnfEstablishProc(APP_OM_MSG_EX_STRU *pstAppToOmMsg,
VOS_UINT16 usReturnPrimId)
{
VOS_UINT32 ulRet;
#ifdef SCM_SNCHECK
g_stSnCheck.ulCount = 0;
g_ulSnErrCount = 0;
#endif
VOS_MemSet(&g_stAcpuTraceEventConfig, 0, sizeof(OM_TRACE_EVENT_CONFIG_PS_STRU));
VOS_MemSet(g_astOmPrintfOutPutLev, 0, OM_PRINTF_MODULE_MAX_NUM*sizeof(LOG_LEVEL_EN));
VOS_MemSet(g_aulLogPrintLevPsTable, 0, LOG_PS_MODULE_MAX_NUM*sizeof(LOG_LEVEL_EN));
VOS_MemSet(g_aulLogPrintLevDrvTable, 0, LOG_DRV_MODULE_MAX_NUM*sizeof(LOG_LEVEL_EN));
/* 先断开链路 */
g_stAcpuCnfCtrlInfo.ulOMSwitchOnOff = OM_STATE_IDLE;
/* OM建链后投票禁止睡眠 */
#if(FEATURE_ON == FEATURE_SOCP_ON_DEMAND)
OM_AcpuSocpVoteInfoAdd(OM_SOCPVOTE_CALLBEGIN);
DRV_SOCP_VOTE(SOCP_VOTE_GU_OM_APP, SOCP_VOTE_FOR_WAKE);
OM_AcpuSocpVoteInfoAdd(OM_SOCPVOTE_CALLEND);
#endif
/* 以兼容校准工具，建链成功回复状态字0x02 */
ulRet = 0x02;
g_ulAcpuEstRcvCnt++;
/* 给工具回复建链成功状态 */
OM_AcpuSendResultChannel(OM_LOGIC_CHANNEL_CNF, OM_QUERY_FUNC, ulRet, usReturnPrimId);
/* 激活链路 */
g_stAcpuCnfCtrlInfo.ulOMSwitchOnOff = OM_STATE_ACTIVE;
/* 通知CCPU链路状态 */
if(VOS_OK != GU_OamSndPcMsgToCcpu(&g_stAcpuCnfCtrlInfo,(VOS_UINT8*)pstAppToOmMsg, sizeof(APP_OM_MSG_EX_STRU)))
{
/* 打印错误 */
}
return VOS_OK;
}
VOS_UINT32 PPM_LogPortSwitch(VOS_UINT32 ulPhyPort, VOS_BOOL ulEffect)
{
CPM_PHY_PORT_ENUM_UINT32 enPhyCfgPort;
CPM_PHY_PORT_ENUM_UINT32 enPhyIndPort;
VOS_ULONG ulLockLevel;
VOS_BOOL ulSndMsg;
if ((CPM_OM_PORT_TYPE_USB != ulPhyPort) && (CPM_OM_PORT_TYPE_VCOM != ulPhyPort))
{
vos_printf("\r\n PPM_LogPortSwitch: enPhyPort is error.port %d\n", ulPhyPort);
g_stPpmPortSwitchInfo.ulPortTypeErr++;
return VOS_ERR;
}
/* 切换的端口与当前端口一致不切换 */
if (ulPhyPort == g_stPortCfg.enPortNum)
{
DRV_SOCP_VOTE(SOCP_VOTE_PPM_RCV, SOCP_VOTE_FOR_WAKE);
/* 切换到VCOM输出时在LOG延迟写入开启情况下需要重新设置SOCP的超时中断 */
if (CPM_OM_PORT_TYPE_VCOM == g_stPortCfg.enPortNum)
{
(VOS_VOID)DRV_SOCP_SET_TIMEOUT(SOCP_TIMEOUT_TRF, 0);
}
/* 为了规避USB输出时开启了延时写入无法连接工具,切换到USB输出时需要重新设置SOCP的超时中断到默认值 */
if (CPM_OM_PORT_TYPE_USB == g_stPortCfg.enPortNum)
{
(VOS_VOID)DRV_SOCP_SET_TIMEOUT(SOCP_TIMEOUT_TRF, 0x17);
}
DRV_SOCP_VOTE(SOCP_VOTE_PPM_RCV, SOCP_VOTE_FOR_SLEEP);
return VOS_OK;
}
g_stPpmPortSwitchInfo.ulStartSlice = OM_GetSlice();
enPhyCfgPort = CPM_QueryPhyPort(CPM_OM_CFG_COMM);
enPhyIndPort = CPM_QueryPhyPort(CPM_OM_IND_COMM);
ulSndMsg = VOS_FALSE;
VOS_SpinLockIntLock(&g_stPpmPortSwitchSpinLock, ulLockLevel);
/* 切换到VCOM输出 */
if (CPM_OM_PORT_TYPE_VCOM == ulPhyPort)
{
/* 当前是USB输出 */
if ((CPM_CFG_PORT == enPhyCfgPort) && (CPM_IND_PORT == enPhyIndPort))
{
/* 需要断开连接 */
ulSndMsg = VOS_TRUE;
CPM_DisconnectPorts(CPM_CFG_PORT, CPM_OM_CFG_COMM);
CPM_DisconnectPorts(CPM_IND_PORT, CPM_OM_IND_COMM);
}
/* 当前OM走VCOM上报 */
CPM_ConnectPorts(CPM_VCOM_CFG_PORT, CPM_OM_CFG_COMM);
CPM_ConnectPorts(CPM_VCOM_IND_PORT, CPM_OM_IND_COMM);
g_stPortCfg.enPortNum = CPM_OM_PORT_TYPE_VCOM;
}
/* 切换到USB输出 */
else
{
/* 当前是VCOM输出 */
if ((CPM_VCOM_CFG_PORT == enPhyCfgPort) && (CPM_VCOM_IND_PORT == enPhyIndPort))
{
/* 断开连接 */
ulSndMsg = VOS_TRUE;
CPM_DisconnectPorts(CPM_VCOM_CFG_PORT, CPM_OM_CFG_COMM);
CPM_DisconnectPorts(CPM_VCOM_IND_PORT, CPM_OM_IND_COMM);
}
/* OM走USB上报 */
CPM_ConnectPorts(CPM_CFG_PORT, CPM_OM_CFG_COMM);
CPM_ConnectPorts(CPM_IND_PORT, CPM_OM_IND_COMM);
g_stPortCfg.enPortNum = CPM_OM_PORT_TYPE_USB;
}
VOS_SpinUnlockIntUnlock(&g_stPpmPortSwitchSpinLock, ulLockLevel);
if (VOS_TRUE == ulSndMsg)
{
PPM_DisconnectAllPort(OM_LOGIC_CHANNEL_CNF);
}
DRV_SOCP_VOTE(SOCP_VOTE_PPM_RCV, SOCP_VOTE_FOR_WAKE);
/* 切换到VCOM输出时在LOG延迟写入开启情况下需要重新设置SOCP的超时中断 */
if (CPM_OM_PORT_TYPE_VCOM == g_stPortCfg.enPortNum)
{
(VOS_VOID)DRV_SOCP_SET_TIMEOUT(SOCP_TIMEOUT_TRF, 0);
}
/* 为了规避USB输出时开启了延时写入无法连接工具,切换到USB输出时需要重新设置SOCP的超时中断到默认值 */
if (CPM_OM_PORT_TYPE_USB == g_stPortCfg.enPortNum)
{
(VOS_VOID)DRV_SOCP_SET_TIMEOUT(SOCP_TIMEOUT_TRF, 0x17);
}
DRV_SOCP_VOTE(SOCP_VOTE_PPM_RCV, SOCP_VOTE_FOR_SLEEP);
g_stPpmPortSwitchInfo.ulSwitchSucc++;
g_stPpmPortSwitchInfo.ulEndSlice = OM_GetSlice();
if (VOS_TRUE == ulEffect)
{
if (VOS_OK != NV_Write(en_NV_Item_Om_Port_Type, &g_stPortCfg, sizeof(OM_CHANNLE_PORT_CFG_STRU)))
{
vos_printf("\r\n PPM_LogPortSwitch: NV_Write fail\n");
}
}
return VOS_OK;
}