void RunOSTests() {
// STUDENT: run any os-level tests here
int handle = 0;
char *file1 = "test1";
char mem[20000];
char mem_read[20000];
int start_byte = 0;
int num_bytes = 0;
int ct = 0;
char stuff = 'a';
int ct_err = 0;
// first, initialize the file system
if(DfsOpenFileSystem() == DFS_FAIL)
{
dbprintf('s', "ostests: failed to open file system.\n");
}
//make sure such file does not exist, if yes, error
if(DfsInodeFilenameExists(file1) != DFS_FAIL)
{
dbprintf('s', "Error: found unexisted file.\n");
}
// now create an inode for such file
handle = DfsInodeOpen(file1);
// now check if such file exists
printf("hello.\n");
if(DfsInodeFilenameExists(file1) != handle)
{
dbprintf('s', "Error: file inode did not create.\n");
}
// start to write bytes into memory
// first write something into the mem
for(ct = 0; ct < 512; ct++)
{
mem[ct] = stuff;
stuff = 'z' ? 'a' : (stuff + 1);
}
// now that mem is stuffed, we write part of it into file
num_bytes = 350; // write 350 bytes
start_byte = 0; // start from 25th byte
//////////////////////// ERROR HERE ///////////////////////
if(DfsInodeWriteBytes(handle, mem, start_byte, num_bytes) != num_bytes)
{
dbprintf('s', "dfs write: write 350 bytes failed.\n");
}
// now check if previous 25 bytes are empty and all stuff are written, read from 0, to 512
if(DfsInodeReadBytes(handle, mem_read, 0, 512) != num_bytes)
{
dbprintf('s', "dfs read: read 350 bytes failed.\n");
}
// now test if the read data is identicle to the written
// first test if first 25 are 0
for(ct = 0; ct < 25; ct++)
{
if(mem_read[ct] != 0)
{
ct_err++;
}
}
/* dbprintf('s', "Among the first 25 data, %d are not correct.\n", ct_err); */
printf("Among the first 25 data, %d are not correct.\n", ct_err);
// then test if next 350 bytes are what were written
ct_err = 0;
for(; ct < 375; ct++)
{
if(mem_read[ct] != mem[ct-25])
{
ct_err++;
}
}
/* dbprintf('s', "Among the next 350 bytes, %d are not correct.\n", ct_err); */
printf("Among the next 350 bytes, %d are not correct.\n", ct_err);
// last check if the remaining 138 bytes are null
ct_err = 0;
for(; ct < 512; ct++)
{
if(mem_read[ct] != 0)
{
ct_err++;
}
}
/* dbprintf('s', "Among the last 138 bytes, %d are not correct.\n", ct_err); */
printf("Among the last 138 bytes, %d are not correct.\n", ct_err);
// next test if we can over write into the file
// change the mem
stuff = '1';
for(ct = 0; ct < 1024; ct++)
{
mem[ct] = stuff;
stuff = '9' ? '1' : (stuff + 1);
}
// now write this into the previous
if(DfsInodeWriteBytes(handle, (void *)mem, 0, 1024) != num_bytes)
{
dbprintf('s', "dfs write: write 1024 bytes failed.\n");
}
// now check if previous 25 bytes are empty and all stuff are written, read from 0, to 512
if(DfsInodeReadBytes(handle, mem_read, 0, 1024) != num_bytes)
{
dbprintf('s', "dfs read: read 1024 bytes failed.\n");
}
ct_err = 0;
for(ct = 0; ct < 1024; ct++)
{
if(mem_read[ct] != mem[ct])
{
ct_err++;
}
}
/* dbprintf('s', "Among the first dfs block, %d are not correct.\n", ct_err); */
printf("Among the first dfs block, %d are not correct.\n", ct_err);
// we need to check if those data still there after closing file system
// now we test how it works when write more than one block
stuff = 'a';
for(ct = 0; ct < 1025; ct++)
{
mem[ct] = stuff;
stuff = 'z' ? 'a' : (stuff + 1);
}
// now write this into the previous
if(DfsInodeWriteBytes(handle, (void *)mem, 1024, 1025) != num_bytes)
{
dbprintf('s', "dfs write: write 1024 bytes failed.\n");
}
// now check if previous 25 bytes are empty and all stuff are written, read from 0, to 512
if(DfsInodeReadBytes(handle, mem_read, 1024, 1025) != num_bytes)
{
dbprintf('s', "dfs read: read 1024 bytes failed.\n");
}
ct_err = 0;
for(ct = 0; ct < 1025; ct++)
{
if(mem_read[ct] != mem[ct])
{
ct_err++;
}
}
/* dbprintf('s', "Among the second dfs block, %d are not correct.\n", ct_err); */
printf("Among the second dfs block, %d are not correct.\n", ct_err);
// check if in the third block, all are null except the first byte
if(DfsInodeReadBytes(handle, mem_read, 2048, 1024) != 1024)
{
dbprintf('s', "dfs read: third 1024 bytes failed.\n");
}
if(mem_read[0] == 0)
{
dbprintf('s', "Error: previous write was not right.\n");
}
for(ct = 1; ct < 1024; ct++)
{
if(mem_read[ct] != 0)
{
dbprintf('s', "Error: a byte is not written while it is not supposed to.\n");
break;
}
}
// now we write into enough bytes to create indirect table
stuff = 'A';
for(ct = 0; ct < 13313; ct++)
{
mem[ct] = stuff;
stuff = 'Z' ? 'A' : (stuff + 1);
}
// write till 5th indirect block, and one more extra byte in 6th
if(DfsInodeWriteBytes(handle, (void *)mem, 2048, 13313) != 13313)
{
dbprintf('s', "dfs write: write 13313 bytes failed.\n");
}
// we should check this by using block print
// close inode
if(DfsInodeDelete(handle) != DFS_SUCCESS)
{
dbprintf('s', "Error: inode delete fail.\n");
}
// close the file system
if(DfsCloseFileSystem() != DFS_SUCCESS)
{
dbprintf('s', "Error: file system close fail.\n");
}
printf("======================== ostests completed ===============================.\n");
}
int FileOpen(char *filename, char *mode){
int inode_handle;
int i;
if(dstrlen(filename) > FILE_MAX_FILENAME_LENGTH)
{
printf("FileOpen -- Filename is too large!\n");
return(FILE_FAIL);
}
if((dstrlen(mode) == 2) && (*mode == 'r') && (*(mode+1) == 'w'))
{
printf("RW MODE\n");
// get inode_handle (create if doesn't exist)
inode_handle = DfsInodeOpen(filename);
if(inode_handle == -1)
{
printf("FileOpen -- Unable to open file in read/write mode\n");
return(FILE_FAIL);
}
}
else if((dstrlen(mode) == 1) && (*mode == 'r'))
{
printf("R MODE\n");
// get inode_handle (create if doesn't exist)
inode_handle = DfsInodeOpen(filename);
if(inode_handle == -1)
{
printf("FileOpen -- Unable to open file in read mode\n");
return(FILE_FAIL);
}
}
else if((dstrlen(mode) == 1) && (*mode == 'w'))
{
printf("W MODE\n");
// check if exists
inode_handle = DfsInodeFilenameExists(filename);
if(inode_handle != -1) // if it exists, delete
{
dbprintf('F', "FileOpen -- Opening in W mode and file exists... deleting inode!\n");
if(DfsInodeDelete(inode_handle) == -1)
{
printf("FileOpen -- Unable to delete inode\n");
return(FILE_FAIL);
}
// TODO: invalidate all file descriptors corresponding to the deleted inode.
}
// then open
inode_handle = DfsInodeOpen(filename);
if(inode_handle == -1)
{
printf("FileOpen -- Unable to open file in read mode\n");
return(FILE_FAIL);
}
}
else
{
printf("FileOpen -- Invalid mode!\n");
return(FILE_FAIL);
}
// We now have an inode descriptor for a given file
// Find an available file descriptor to hold data
for(i=0; i<FILE_MAX_OPEN_FILES; i++)
{
if(fd_array[i].FD_Valid == 0)
{
// Populate file descriptor with appropriate data
dstrncpy ((char*)&fd_array[i].FD_FileName, filename, FILE_MAX_FILENAME_LENGTH);
fd_array[i].FD_InodeHandle = inode_handle;
fd_array[i].FD_CurrentPosition = 0;
fd_array[i].FD_EOF_Flag = 0;
if(dstrlen(mode) == 2)
fd_array[i].FD_Mode = FILE_READWRITE;
else if((dstrlen(mode) == 1) && (*mode == 'r'))
fd_array[i].FD_Mode = FILE_READ;
else
fd_array[i].FD_Mode = FILE_WRITE;
fd_array[i].FD_PID = GetCurrentPid();
// mark as valid, and return handle to file descriptor
fd_array[i].FD_Valid = 1;
dbprintf('F', "FileOpen -- Using file descriptor #%d for newly opened file\n", i);
return(i);
}
}
printf("FileOpen -- Unable to find an empty file descriptor!\n");
return(FILE_FAIL);
}
