C++ (Cpp) DownloadMPFS Examples

Example #1

File: UARTConfig.c Project: logic-fault/ethernet-QEL

void DoUARTConfig(void)
{
    BYTE response[MAX_USER_RESPONSE_LEN];
    IP_ADDR tempIPValue;
    IP_ADDR *destIPValue;
	WORD_VAL wvTemp;
    BOOL bQuit = FALSE;

	while(!bQuit)
	{
		// Display the menu
	    putrsUART("\r\n\r\n\rMicrochip TCP/IP Config Application ("TCPIP_STACK_VERSION", " __DATE__ ")\r\n\r\n");
	    putrsUART("\t1: Change serial number:\t\t");
		wvTemp.v[1] = AppConfig.MyMACAddr.v[4];
		wvTemp.v[0] = AppConfig.MyMACAddr.v[5];
		uitoa(wvTemp.Val, response);
		putsUART((char *)response);
		putrsUART("\r\n\t2: Change host name:\t\t\t");
		putsUART((char *)AppConfig.NetBIOSName);
	    putrsUART("\r\n\t3: Change static IP address:\t\t");
	    DisplayIPValue(AppConfig.MyIPAddr);
	    putrsUART("\r\n\t4: Change static gateway address:\t");
	    DisplayIPValue(AppConfig.MyGateway);
	    putrsUART("\r\n\t5: Change static subnet mask:\t\t");
	    DisplayIPValue(AppConfig.MyMask);
		putrsUART("\r\n\t6: Change static primary DNS server:\t");
	    DisplayIPValue(AppConfig.PrimaryDNSServer);
		putrsUART("\r\n\t7: Change static secondary DNS server:\t");
	    DisplayIPValue(AppConfig.SecondaryDNSServer);
	    putrsUART("\r\n\t8: ");
		putrsUART((ROM char*)(AppConfig.Flags.bIsDHCPEnabled ? "Dis" : "En"));
		putrsUART("able DHCP & IP Gleaning:\t\tDHCP is currently ");
		putrsUART((ROM char*)(AppConfig.Flags.bIsDHCPEnabled ? "enabled" : "disabled"));
	    putrsUART("\r\n\t9: Download MPFS image.");
	    putrsUART("\r\n\t0: Save & Quit.");
	    putrsUART("\r\nEnter a menu choice: ");
	
	
		// Wait for the user to press a key
	    while(!DataRdyUART());
	
		putrsUART((ROM char*)"\r\n");
	
		// Execute the user selection
	    switch(ReadUART())
	    {
		    case '1':
				putrsUART("New setting: ");
				if(ReadStringUART(response, sizeof(response)))
				{
					wvTemp.Val = atoi((char*)response);
			        AppConfig.MyMACAddr.v[4] = wvTemp.v[1];
		    	    AppConfig.MyMACAddr.v[5] = wvTemp.v[0];
				}
		        break;
		
			case '2':
				putrsUART("New setting: ");
		        ReadStringUART(response, sizeof(response) > sizeof(AppConfig.NetBIOSName) ? sizeof(AppConfig.NetBIOSName) : sizeof(response));
				if(response[0] != '\0')
				{
					memcpy(AppConfig.NetBIOSName, (void*)response, sizeof(AppConfig.NetBIOSName));
			        FormatNetBIOSName(AppConfig.NetBIOSName);
				}
				break;
		
		    case '3':
		        destIPValue = &AppConfig.MyIPAddr;
		        goto ReadIPConfig;
		
		    case '4':
		        destIPValue = &AppConfig.MyGateway;
		        goto ReadIPConfig;
		
		    case '5':
		        destIPValue = &AppConfig.MyMask;
		        goto ReadIPConfig;
		
		    case '6':
		        destIPValue = &AppConfig.PrimaryDNSServer;
		        goto ReadIPConfig;
	
			case '7':
		        destIPValue = &AppConfig.SecondaryDNSServer;
		        goto ReadIPConfig;
		
ReadIPConfig:
				putrsUART("New setting: ");
		        ReadStringUART(response, sizeof(response));
		
		        if(StringToIPAddress(response, &tempIPValue))
		            destIPValue->Val = tempIPValue.Val;
				else
		            putrsUART("Invalid input.\r\n");

		        break;
		
		
		    case '8':
		        AppConfig.Flags.bIsDHCPEnabled = !AppConfig.Flags.bIsDHCPEnabled;
		        break;
		
		    case '9':
				#if (defined(MPFS_USE_EEPROM)|| defined(MPFS_USE_SPI_FLASH)) && defined(STACK_USE_MPFS2)
		        	DownloadMPFS();
				#endif
		        break;
		
		    case '0':
			    bQuit = TRUE;
				#if defined(EEPROM_CS_TRIS) || defined(SPIFLASH_CS_TRIS)
		        	SaveAppConfig(&AppConfig);
					putrsUART("Settings saved.\r\n");
				#else
					putrsUART("External EEPROM/Flash not present -- settings will be lost at reset.\r\n");
				#endif
		        break;
		}
	}
}

Example #2

File: vscptest.c Project: dbortolini/vscp_firmware

void ExecuteMenuChoice(MENU_CMD choice)
{
    char response[MAX_USER_RESPONSE_LEN];
    IP_ADDR tempIPValue;
    IP_ADDR *destIPValue;

    serPutByte('\r');
    serPutByte('\n');
    serPutRomString(menuCommandPrompt[choice-'0'-1]);

    switch(choice)
    {
    case MENU_CMD_SERIAL_NUMBER:
        itoa(AppConfig.SerialNumber.Val, response);
        serPutString((BYTE*)response);
        serPutByte(')');
        serPutByte(':');
        serPutByte(' ');

        if ( USARTGetString(response, sizeof(response)) )
        {
            AppConfig.SerialNumber.Val = atoi(response);

            AppConfig.MyMACAddr.v[4] = AppConfig.SerialNumber.v[1];
            AppConfig.MyMACAddr.v[5] = AppConfig.SerialNumber.v[0];
        }
        else
            goto HandleInvalidInput;

        break;

    case MENU_CMD_IP_ADDRESS:
        destIPValue = &AppConfig.MyIPAddr;
        goto ReadIPConfig;

    case MENU_CMD_GATEWAY_ADDRESS:
        destIPValue = &AppConfig.MyGateway;
        goto ReadIPConfig;

    case MENU_CMD_SUBNET_MASK:
        destIPValue = &AppConfig.MyMask;

    ReadIPConfig:
        DisplayIPValue(destIPValue, FALSE);
        serPutByte(')');
        serPutByte(':');
        serPutByte(' ');

        USARTGetString(response, sizeof(response));

        if ( !StringToIPAddress(response, &tempIPValue) )
        {
HandleInvalidInput:
            serPutRomString(InvalidInputMsg);
            while( !serIsGetReady() );
            serGetByte();
        }
        else
        {
            destIPValue->Val = tempIPValue.Val;
        }
        break;


    case MENU_CMD_ENABLE_AUTO_CONFIG:
        AppConfig.Flags.bIsDHCPEnabled = TRUE;
        break;

    case MENU_CMD_DISABLE_AUTO_CONFIG:
        AppConfig.Flags.bIsDHCPEnabled = FALSE;
        break;

    case MENU_CMD_DOWNLOAD_MPFS:
#if defined(MPFS_USE_EEPROM)
        DownloadMPFS();
#endif
        break;

    case MENU_CMD_QUIT:
#if defined(MPFS_USE_EEPROM)
        appcfgSave();
#endif
        break;
    }
}