C++ (Cpp) EDMA_CTLR_CHAN Examples

Example #1

File: devices-tnetv107x.c Project: Jackeagle/android_kernel_sony_c2305

static struct resource mmc0_resources[] = {
	{ /* Memory mapped registers */
		.start	= TNETV107X_SDIO0_BASE,
		.end	= TNETV107X_SDIO0_BASE + 0x0ff,
		.flags	= IORESOURCE_MEM
	},
	{ /* MMC interrupt */
		.start	= IRQ_TNETV107X_MMC0,
		.flags	= IORESOURCE_IRQ
	},
	{ /* SDIO interrupt */
		.start	= IRQ_TNETV107X_SDIO0,
		.flags	= IORESOURCE_IRQ
	},
	{ /* DMA RX */
		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_RX),
		.flags	= IORESOURCE_DMA
	},
	{ /* DMA TX */
		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_TX),
		.flags	= IORESOURCE_DMA
	},
};

static struct resource mmc1_resources[] = {
	{ /* Memory mapped registers */
		.start	= TNETV107X_SDIO1_BASE,
		.end	= TNETV107X_SDIO1_BASE + 0x0ff,
		.flags	= IORESOURCE_MEM
	},
	{ /* MMC interrupt */

Example #2

File: devices-da8xx.c Project: 123456798wil/kernel_dell_streak7

	return platform_device_register(&da8xx_lcdc_device);
}

static struct resource da8xx_mmcsd0_resources[] = {
	{		/* registers */
		.start	= DA8XX_MMCSD0_BASE,
		.end	= DA8XX_MMCSD0_BASE + SZ_4K - 1,
		.flags	= IORESOURCE_MEM,
	},
	{		/* interrupt */
		.start	= IRQ_DA8XX_MMCSDINT0,
		.end	= IRQ_DA8XX_MMCSDINT0,
		.flags	= IORESOURCE_IRQ,
	},
	{		/* DMA RX */
		.start	= EDMA_CTLR_CHAN(0, 16),
		.end	= EDMA_CTLR_CHAN(0, 16),
		.flags	= IORESOURCE_DMA,
	},
	{		/* DMA TX */
		.start	= EDMA_CTLR_CHAN(0, 17),
		.end	= EDMA_CTLR_CHAN(0, 17),
		.flags	= IORESOURCE_DMA,
	},
};

static struct platform_device da8xx_mmcsd0_device = {
	.name		= "davinci_mmc",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(da8xx_mmcsd0_resources),
	.resource	= da8xx_mmcsd0_resources,

Example #3

File: devices.c Project: cake654326/xpenology

		.start = DAVINCI_MMCSD0_BASE,
		.end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
		.flags = IORESOURCE_MEM,
	},
	/* IRQs:  MMC/SD, then SDIO */
	{
		.start = IRQ_MMCINT,
		.flags = IORESOURCE_IRQ,
	}, {
		/* different on dm355 */
		.start = IRQ_SDIOINT,
		.flags = IORESOURCE_IRQ,
	},
	/* DMA channels: RX, then TX */
	{
		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT),
		.flags = IORESOURCE_DMA,
	}, {
		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT),
		.flags = IORESOURCE_DMA,
	},
};

static struct platform_device davinci_mmcsd0_device = {
	.name = "dm6441-mmc",
	.id = 0,
	.dev = {
		.dma_mask = &mmcsd0_dma_mask,
		.coherent_dma_mask = DMA_BIT_MASK(32),
	},
	.num_resources = ARRAY_SIZE(mmcsd0_resources),

Example #4

File: devices-da8xx.c Project: Klaus-schwarzkopf/linux-davinci-sensortherm

	return platform_device_register(&da8xx_lcdc_device);
}

static struct resource da8xx_mmcsd0_resources[] = {
	{		/* registers */
		.start	= DA8XX_MMCSD0_BASE,
		.end	= DA8XX_MMCSD0_BASE + SZ_4K - 1,
		.flags	= IORESOURCE_MEM,
	},
	{		/* interrupt */
		.start	= IRQ_DA8XX_MMCSDINT0,
		.end	= IRQ_DA8XX_MMCSDINT0,
		.flags	= IORESOURCE_IRQ,
	},
	{		/* DMA RX */
		.start	= EDMA_CTLR_CHAN(0, 16),
		.end	= EDMA_CTLR_CHAN(0, 16),
		.flags	= IORESOURCE_DMA,
	},
	{		/* DMA TX */
		.start	= EDMA_CTLR_CHAN(0, 17),
		.end	= EDMA_CTLR_CHAN(0, 17),
		.flags	= IORESOURCE_DMA,
	},
};

static struct platform_device da8xx_mmcsd0_device = {
	.name		= "davinci_mmc",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(da8xx_mmcsd0_resources),
	.resource	= da8xx_mmcsd0_resources,