/**
* @brief Returns the last stored variable data, if found,
* which correspond to the passed virtual address
* @param Address: Variable virtual address
* @param Data: Pointer to data variable
* @retval Success or error status:
* - EEPROM_OK: if variable was found
* - EEPROM_BAD_ADDRESS: if the variable was not found
* - EEPROM_NO_VALID_PAGE: if no valid page was found.
*/
uint16 EEPROMClass::read(uint16 Address, uint16 *Data)
{
uint32 pageBase, pageEnd;
// Set default data (empty EEPROM)
*Data = EEPROM_DEFAULT_DATA;
if (Status == EEPROM_NOT_INIT)
if (init() != EEPROM_OK)
return Status;
// Get active Page for read operation
pageBase = EE_FindValidPage();
if (pageBase == 0)
return EEPROM_NO_VALID_PAGE;
// Get the valid Page end Address
pageEnd = pageBase + ((uint32)(PageSize - 2));
// Check each active page address starting from end
for (pageBase += 6; pageEnd >= pageBase; pageEnd -= 4)
if ((*(__io uint16*)pageEnd) == Address) // Compare the read address with the virtual address
{
*Data = (*(__io uint16*)(pageEnd - 2)); // Get content of Address-2 which is variable value
return EEPROM_OK;
}
// Return ReadStatus value: (0: variable exist, 1: variable doesn't exist)
return EEPROM_BAD_ADDRESS;
}
/*******************************************************************************
* Function Name : EE_VerifyPageFullWriteVariable
* Description : Verify if active page is full and Writes variable in EEPROM.
* Input : - VirtAddress: 16 bit virtual address of the variable
* - Data: 16 bit data to be written as variable value
* Output : None
* Return : - Success or error status:
* - FLASH_COMPLETE: on success
* - PAGE_FULL: if valid page is full
* - NO_VALID_PAGE: if no valid page was found
* - Flash error code: on write Flash error
*******************************************************************************/
u16 EE_VerifyPageFullWriteVariable(u16 VirtAddress, u16 Data)
{
FLASH_Status FlashStatus = FLASH_COMPLETE;
u16 ValidPage = PAGE0;
u32 Address = 0x08010000, PageEndAddress = 0x080107FF;
/* Get valid Page for write operation */
ValidPage = EE_FindValidPage(WRITE_IN_VALID_PAGE);
/* Check if there is no valid page */
if (ValidPage == NO_VALID_PAGE)
{
return NO_VALID_PAGE;
}
/* Get the valid Page start Address */
Address = (u32)(EEPROM_START_ADDRESS + (u32)(ValidPage * PAGE_SIZE));
/* Get the valid Page end Address */
PageEndAddress = (u32)((EEPROM_START_ADDRESS - 2) + (u32)((1 + ValidPage) * PAGE_SIZE));
/* Check each active page address starting from beginning */
while (Address < PageEndAddress)
{
/* Verify each time if Address and Address+2 contents are equal to Data and VirtAddress respectively */
if (((*(vu16*)Address) == Data) && ((*(vu16*)(Address + 2)) == VirtAddress))
{
return FLASH_COMPLETE;
}
/* Verify if Address and Address+2 contents are 0xFFFFFFFF */
if ((*(vu32*)Address) == 0xFFFFFFFF)
{
/* Set variable data */
FlashStatus = FLASH_ProgramHalfWord(Address, Data);
/* If program operation was failed, a Flash error code is returned */
if (FlashStatus != FLASH_COMPLETE)
{
return FlashStatus;
}
/* Set variable virtual address */
FlashStatus = FLASH_ProgramHalfWord(Address + 2, VirtAddress);
/* Return program operation status */
return FlashStatus;
}
else
{
/* Next address location */
Address = Address + 4;
}
}
/* Return PAGE_FULL in case the valid page is full */
return PAGE_FULL;
}
/**
* @brief Verify if active page is full and Writes variable in EEPROM.
* @param VirtAddress: 16 bit virtual address of the variable
* @param Data: 16 bit data to be written as variable value
* @retval Success or error status:
* - FLASH_COMPLETE: on success
* - PAGE_FULL: if valid page is full
* - NO_VALID_PAGE: if no valid page was found
* - Flash error code: on write Flash error
*/
static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data)
{
FLASH_Status FlashStatus = FLASH_COMPLETE;
uint16_t ValidPage = PAGE0;
uint32_t Address = EEPROM_START_ADDRESS, PageEndAddress = EEPROM_START_ADDRESS+PAGE_SIZE-1;
/* Get valid Page for write operation */
ValidPage = EE_FindValidPage(WRITE_IN_VALID_PAGE);
/* Check if there is no valid page */
if (ValidPage == NO_VALID_PAGE)
{
return NO_VALID_PAGE;
}
//FLASH_Unlock();
/* Get the valid Page start Address */
Address = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE));
/* Get the valid Page end Address */
PageEndAddress = (uint32_t)((EEPROM_START_ADDRESS - 2) + (uint32_t)((1 + ValidPage) * PAGE_SIZE));
/* Check each active page address starting from begining */
while (Address < PageEndAddress)
{
/* Verify if Address and Address+2 contents are 0xFFFFFFFF */
if ((*(__IO uint32_t*)Address) == 0xFFFFFFFF)
{
/* Set variable data */
FlashStatus = FLASH_ProgramHalfWord(Address, Data);
/* If program operation was failed, a Flash error code is returned */
if (FlashStatus != FLASH_COMPLETE)
{
//FLASH_Lock();
return FlashStatus;
}
/* Set variable virtual address */
FlashStatus = FLASH_ProgramHalfWord(Address + 2, VirtAddress);
/* Return program operation status */
//FLASH_Lock();
return FlashStatus;
}
else
{
/* Next address location */
Address = Address + 4;
}
}
//FLASH_Lock();
/* Return PAGE_FULL in case the valid page is full */
return PAGE_FULL;
}
/**
* @brief Return number of variable
* @retval Number of variables
*/
uint16 EEPROMClass::count(uint16 *Count)
{
if (Status == EEPROM_NOT_INIT)
if (init() != EEPROM_OK)
return Status;
// Get valid Page for write operation
uint32 pageBase = EE_FindValidPage();
if (pageBase == 0)
return EEPROM_NO_VALID_PAGE; // No valid page, return max. numbers
*Count = EE_GetVariablesCount(pageBase, 0xFFFF);
return EEPROM_OK;
}
/**
* @brief Returns the last stored variable data, if found, which correspond to
* the passed virtual address
* @param VirtAddress: Variable virtual address
* @param Data: Global variable contains the read variable value
* @retval Success or error status:
* - 0: if variable was found
* - 1: if the variable was not found
* - NO_VALID_PAGE: if no valid page was found.
*/
uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data)
{
uint16_t ValidPage = PAGE0;
uint16_t AddressValue = 0x5555, ReadStatus = 1;
uint32_t Address = 0x08010000, PageStartAddress = 0x08010000;
/* Get active Page for read operation */
ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE);
/* Check if there is no valid page */
if (ValidPage == NO_VALID_PAGE)
{
return NO_VALID_PAGE;
}
/* Get the valid Page start Address */
PageStartAddress = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE));
/* Get the valid Page end Address */
//Address = (uint32_t)((EEPROM_START_ADDRESS - 2) + (uint32_t)((1 + ValidPage) * PAGE_SIZE));
Address=CurWrAddress-2;
/* Check each active page address starting from end */
while (Address > (PageStartAddress + 2))
{
/* Get the current location content to be compared with virtual address */
AddressValue = (*(__IO uint16_t*)Address);
/* Compare the read address with the virtual address */
if (AddressValue == VirtAddress)
{
/* Get content of Address-2 which is variable value */
*Data = (*(__IO uint16_t*)(Address - 2));
/* In case variable value is read, reset ReadStatus flag */
ReadStatus = 0;
break;
}
else
{
/* Next address location */
Address = Address - 4;
}
}
/* Return ReadStatus value: (0: variable exist, 1: variable doesn't exist) */
return ReadStatus;
}
/**
* @brief Verify if active page is full and Writes variable in EEPROM.
* @param VirtAddress: 16 bit virtual address of the variable
* @param Data: 16 bit data to be written as variable value
* @retval Success or error status:
* - FLASH_COMPLETE: on success
* - PAGE_FULL: if valid page is full
* - NO_VALID_PAGE: if no valid page was found
* - Flash error code: on write Flash error
*/
static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data)
{
HAL_StatusTypeDef flashstatus = HAL_OK;
uint16_t validpage = PAGE0;
uint32_t address = EEPROM_START_ADDRESS, pageendaddress = EEPROM_START_ADDRESS+PAGE_SIZE;
/* Get valid Page for write operation */
validpage = EE_FindValidPage(WRITE_IN_VALID_PAGE);
/* Check if there is no valid page */
if (validpage == NO_VALID_PAGE)
{
return NO_VALID_PAGE;
}
/* Get the valid Page start address */
address = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(validpage * PAGE_SIZE));
/* Get the valid Page end address */
pageendaddress = (uint32_t)((EEPROM_START_ADDRESS - 1) + (uint32_t)((validpage + 1) * PAGE_SIZE));
/* Check each active page address starting from begining */
while (address < pageendaddress)
{
/* Verify if address and address+2 contents are 0xFFFFFFFF */
if ((*(__IO uint32_t*)address) == 0xFFFFFFFF)
{
/* Set variable data */
flashstatus = HAL_FLASH_Program(FLASH_TYPEPROGRAM_HALFWORD, address, Data);
/* If program operation was failed, a Flash error code is returned */
if (flashstatus != HAL_OK)
{
return flashstatus;
}
/* Set variable virtual address */
flashstatus = HAL_FLASH_Program(FLASH_TYPEPROGRAM_HALFWORD, address + 2, VirtAddress);
/* Return program operation status */
return flashstatus;
}
else
{
/* Next address location */
address = address + 4;
}
}
/* Return PAGE_FULL in case the valid page is full */
return PAGE_FULL;
}
/**
* @brief Returns the erase counter for current page
* @param Data: Global variable contains the read variable value
* @retval Success or error status:
* - EEPROM_OK: if erases counter return.
* - EEPROM_NO_VALID_PAGE: if no valid page was found.
*/
uint16 EEPROMClass::erases(uint16 *Erases)
{
uint32 pageBase;
if (Status != EEPROM_OK)
if (init() != EEPROM_OK)
return Status;
// Get active Page for read operation
pageBase = EE_FindValidPage();
if (pageBase == 0)
return EEPROM_NO_VALID_PAGE;
*Erases = (*(__io uint16*)pageBase+2);
return EEPROM_OK;
}
//初始化写地址，减少每次读写时查询时间
uint16_t InitCurrWrAddress(void)
{
FLASH_Status FlashStatus = FLASH_COMPLETE;
uint16_t ValidPage = PAGE0;
//uint32_t Address;
uint32_t PageEndAddress;
/* Get valid Page for write operation */
ValidPage = EE_FindValidPage(WRITE_IN_VALID_PAGE);
/* Check if there is no valid page */
if (ValidPage == NO_VALID_PAGE)
{
CurWrAddress = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE));
return NO_VALID_PAGE;
}
/* Get the valid Page start Address */
//Address = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE));
CurWrAddress = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE));
/* Get the valid Page end Address */
PageEndAddress = (uint32_t)((EEPROM_START_ADDRESS - 2) + (uint32_t)((1 + ValidPage) * PAGE_SIZE));
/* Check each active page address starting from begining */
while (CurWrAddress < PageEndAddress)
{
/* Verify if Address and Address+2 contents are 0xFFFFFFFF */
if ((*(__IO uint32_t*)CurWrAddress) == 0xFFFFFFFF)
{
/* Set variable virtual address */
FlashStatus = FLASH_COMPLETE;
/* Return program operation status */
return FlashStatus;
}
else
{
/* Next address location */
CurWrAddress = CurWrAddress + 4;
}
}
/* Return PAGE_FULL in case the valid page is full */
return PAGE_FULL;
}
/**
* @brief Transfers last updated variables data from the full Page to
* an empty one.
* @param VirtAddress: 16 bit virtual address of the variable
* @param Data: 16 bit data to be written as variable value
* @retval Success or error status:
* - FLASH_COMPLETE: on success
* - PAGE_FULL: if valid page is full
* - NO_VALID_PAGE: if no valid page was found
* - Flash error code: on write Flash error
*/
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data)
{
FLASH_Status FlashStatus = FLASH_COMPLETE;
uint32_t NewPageAddress = 0x00000000, OldPageAddress = 0x00000000;
uint16_t ValidPage = PAGE0, VarIdx = 0;
uint16_t EepromStatus = 0, ReadStatus = 0;
/* Get active Page for read operation */
ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE);
if(ValidPage == PAGE1) { /* Page1 valid */
/* New page address where variable will be moved to */
NewPageAddress = PAGE0_BASE_ADDRESS;
/* Old page address where variable will be taken from */
OldPageAddress = PAGE1_BASE_ADDRESS;
} else if(ValidPage == PAGE0) { /* Page0 valid */
/* New page address where variable will be moved to */
NewPageAddress = PAGE1_BASE_ADDRESS;
/* Old page address where variable will be taken from */
OldPageAddress = PAGE0_BASE_ADDRESS;
} else {
return NO_VALID_PAGE; /* No valid Page */
}
/* Set the new Page status to RECEIVE_DATA status */
FlashStatus = FLASH_ProgramHalfWord(NewPageAddress, RECEIVE_DATA);
/* If program operation was failed, a Flash error code is returned */
if(FlashStatus != FLASH_COMPLETE) {
return FlashStatus;
}
/* Write the variable passed as parameter in the new active page */
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddress, Data);
/* If program operation was failed, a Flash error code is returned */
if(EepromStatus != FLASH_COMPLETE) {
return EepromStatus;
}
/* Transfer process: transfer variables from old to the new active page */
for(VarIdx = 0; VarIdx < NumbOfVar; VarIdx++) {
if(VirtAddVarTab[VarIdx] != VirtAddress) { /* Check each variable except the one passed as parameter */
/* Read the other last variable updates */
ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
/* In case variable corresponding to the virtual address was found */
if(ReadStatus != 0x1) {
/* Transfer the variable to the new active page */
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
/* If program operation was failed, a Flash error code is returned */
if(EepromStatus != FLASH_COMPLETE) {
return EepromStatus;
}
}
}
}
/* Erase the old Page: Set old Page status to ERASED status */
FlashStatus = FLASH_ErasePage(OldPageAddress);
/* If erase operation was failed, a Flash error code is returned */
if(FlashStatus != FLASH_COMPLETE) {
return FlashStatus;
}
/* Set new Page status to VALID_PAGE status */
FlashStatus = FLASH_ProgramHalfWord(NewPageAddress, VALID_PAGE);
/* If program operation was failed, a Flash error code is returned */
if(FlashStatus != FLASH_COMPLETE) {
return FlashStatus;
}
/* Return last operation flash status */
return FlashStatus;
}
/**
* @brief Transfers last updated variables data from the full Page to
* an empty one.
* @param VirtAddress: 16 bit virtual address of the variable
* @param Data: 16 bit data to be written as variable value
* @retval Success or error status:
* - FLASH_COMPLETE: on success
* - PAGE_FULL: if valid page is full
* - NO_VALID_PAGE: if no valid page was found
* - Flash error code: on write Flash error
*/
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data)
{
FLASH_Status FlashStatus = FLASH_COMPLETE;
uint32_t NewPageAddress = 0x080103FF, OldPageAddress = 0x08010000;
uint16_t ValidPage = PAGE0, VarIdx = 0;
uint16_t EepromStatus = 0;
/* Get active Page for read operation */
ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE);
if (ValidPage == PAGE1) /* Page1 valid */
{
/* New page address where variable will be moved to */
NewPageAddress = PAGE0_BASE_ADDRESS;
/* Old page address where variable will be taken from */
OldPageAddress = PAGE1_BASE_ADDRESS;
}
else if (ValidPage == PAGE0) /* Page0 valid */
{
/* New page address where variable will be moved to */
NewPageAddress = PAGE1_BASE_ADDRESS;
/* Old page address where variable will be taken from */
OldPageAddress = PAGE0_BASE_ADDRESS;
}
else
{
return NO_VALID_PAGE; /* No valid Page */
}
/* Set the new Page status to RECEIVE_DATA status */
FlashStatus = FLASH_ProgramHalfWord(NewPageAddress, RECEIVE_DATA);
/* If program operation was failed, a Flash error code is returned */
if (FlashStatus != FLASH_COMPLETE)
{
return FlashStatus;
}
/* Write the variable passed as parameter in the new active page */
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddress, Data);
/* If program operation was failed, a Flash error code is returned */
if (EepromStatus != FLASH_COMPLETE)
{
return EepromStatus;
}
/* First transfer the contiguous region of addresses */
for (VarIdx = 0; VarIdx < EE_MAX_CONTIGUOUS; VarIdx++)
{
/* Check each variable except the one passed as parameter */
if (VarIdx != VirtAddress)
{
EepromStatus = EE_TransferVariable(VarIdx, NewPageAddress);
if (EepromStatus != FLASH_COMPLETE)
return EepromStatus;
}
}
/* Then the individual addresses in the address table */
for (VarIdx = 0; VarIdx < EE_NUM_ADDR; VarIdx++)
{
if (ee_addr_table[VarIdx] != VirtAddress)
{
EepromStatus = EE_TransferVariable(ee_addr_table[VarIdx], NewPageAddress);
if (EepromStatus != FLASH_COMPLETE)
return EepromStatus;
}
}
/* Erase the old Page: Set old Page status to ERASED status */
FlashStatus = FLASH_ErasePage(OldPageAddress);
/* If erase operation was failed, a Flash error code is returned */
if (FlashStatus != FLASH_COMPLETE)
{
return FlashStatus;
}
/* Set new Page status to VALID_PAGE status */
FlashStatus = FLASH_ProgramHalfWord(NewPageAddress, VALID_PAGE);
/* If program operation was failed, a Flash error code is returned */
if (FlashStatus != FLASH_COMPLETE)
{
return FlashStatus;
}
/* Return last operation flash status */
return FlashStatus;
}
/**
* @brief Transfers last updated variables data from the full Page to
* an empty one.
* @param VirtAddress: 16 bit virtual address of the variable
* @param Data: 16 bit data to be written as variable value
* @retval Success or error status:
* - FLASH_COMPLETE: on success
* - PAGE_FULL: if valid page is full
* - NO_VALID_PAGE: if no valid page was found
* - Flash error code: on write Flash error
*/
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data)
{
FLASH_Status FlashStatus = FLASH_COMPLETE;
uint32_t NewPageAddress = PAGE1_BASE_ADDRESS, OldPageAddress = PAGE0_BASE_ADDRESS;
uint16_t ValidPage = PAGE0, VarIdx = 0;
uint16_t EepromStatus = 0, ReadStatus = 0;
/* Get active Page for read operation */
ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE);
if (ValidPage == PAGE1) /* Page1 valid */
{
/* New page address where variable will be moved to */
NewPageAddress = PAGE0_BASE_ADDRESS;
/* Old page address where variable will be taken from */
OldPageAddress = PAGE1_BASE_ADDRESS;
}
else if (ValidPage == PAGE0) /* Page0 valid */
{
/* New page address where variable will be moved to */
NewPageAddress = PAGE1_BASE_ADDRESS;
/* Old page address where variable will be taken from */
OldPageAddress = PAGE0_BASE_ADDRESS;
}
else
{
return NO_VALID_PAGE; /* No valid Page */
}
//FLASH_Unlock();
/* Set the new Page status to RECEIVE_DATA status */
FlashStatus = FLASH_ProgramHalfWord(NewPageAddress, RECEIVE_DATA);
/* If program operation was failed, a Flash error code is returned */
if (FlashStatus != FLASH_COMPLETE)
{
//FLASH_Lock();
return FlashStatus;
}
/* Write the variable passed as parameter in the new active page */
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddress, Data);
/* If program operation was failed, a Flash error code is returned */
if (EepromStatus != FLASH_COMPLETE)
{
//FLASH_Lock();
return EepromStatus;
}
/* Transfer process: transfer variables from old to the new active page */
for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++)
{
if (VirtAddVarTab[VarIdx] != VirtAddress) /* Check each variable except the one passed as parameter */
{
/* Read the other last variable updates */
ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
/* In case variable corresponding to the virtual address was found */
if (ReadStatus != 0x1)
{
/* Transfer the variable to the new active page */
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
/* If program operation was failed, a Flash error code is returned */
if (EepromStatus != FLASH_COMPLETE)
{
//FLASH_Lock();
return EepromStatus;
}
}
}
}
/* Erase the old Page: Set old Page status to ERASED status */
FlashStatus = eraseHelper(OldPageAddress);
/* If erase operation was failed, a Flash error code is returned */
if (FlashStatus != FLASH_COMPLETE)
{
//FLASH_Lock();
return FlashStatus;
}
/* Set new Page status to VALID_PAGE status */
FlashStatus = FLASH_ProgramHalfWord(NewPageAddress, VALID_PAGE);
/* If program operation was failed, a Flash error code is returned */
if (FlashStatus != FLASH_COMPLETE)
{
//FLASH_Lock();
return FlashStatus;
}
// FIX from https://my.st.com/public/STe2ecommunities/mcu/Lists/cortex_mx_stm32/Flat.aspx?RootFolder=%2Fpublic%2FSTe2ecommunities%2Fmcu%2FLists%2Fcortex_mx_stm32%2FEEPROM%20emulation%20in%20STM32F4x%20family&FolderCTID=0x01200200770978C69A1141439FE559EB459D7580009C4E14902C3CDE46A77F0FFD06506F5B¤tviews=272
// /* Flush the caches by setting the DCRST and ICRST bits in the FLASH_CR register. Note: The I/D cache should be flushed only when it is disabled (I/DCEN = 0).*/
// FLASH->ACR &= ~(FLASH_ACR_ICEN |FLASH_ACR_DCEN);
// FLASH->ACR = (FLASH_ACR_ICRST |FLASH_ACR_DCRST);
// /* Now restore ( Enable I/D caches, clear the DCRST and ICRST bits */
// FLASH->ACR = (FLASH_ACR_ICEN |FLASH_ACR_DCEN);
// FLASH->ACR = ~(FLASH_ACR_ICRST |FLASH_ACR_DCRST);
//FLASH_Lock();
/* Return last operation flash status */
return FlashStatus;
}
/**
* @brief Transfers last updated variables data from the full Page to
* an empty one.
* @param VirtAddress: 16 bit virtual address of the variable
* @param Data: 16 bit data to be written as variable value
* @retval Success or error status:
* - FLASH_COMPLETE: on success
* - PAGE_FULL: if valid page is full
* - NO_VALID_PAGE: if no valid page was found
* - Flash error code: on write Flash error
*/
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data)
{
HAL_StatusTypeDef FlashStatus = HAL_OK;
uint32_t NewPageAddress = EEPROM_START_ADDRESS;
uint16_t OldPageId=0;
uint16_t ValidPage = PAGE0, VarIdx = 0;
uint16_t EepromStatus = 0, ReadStatus = 0;
uint32_t SectorError = 0;
FLASH_EraseInitTypeDef pEraseInit;
/* Get active Page for read operation */
ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE);
if (ValidPage == PAGE1) /* Page1 valid */
{
/* New page address where variable will be moved to */
NewPageAddress = PAGE0_BASE_ADDRESS;
/* Old page ID where variable will be taken from */
OldPageId = PAGE1_ID;
}
else if (ValidPage == PAGE0) /* Page0 valid */
{
/* New page address where variable will be moved to */
NewPageAddress = PAGE1_BASE_ADDRESS;
/* Old page ID where variable will be taken from */
OldPageId = PAGE0_ID;
}
else
{
return NO_VALID_PAGE; /* No valid Page */
}
/* Set the new Page status to RECEIVE_DATA status */
FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, NewPageAddress, RECEIVE_DATA);
/* If program operation was failed, a Flash error code is returned */
if (FlashStatus != HAL_OK)
{
return FlashStatus;
}
/* Write the variable passed as parameter in the new active page */
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddress, Data);
/* If program operation was failed, a Flash error code is returned */
if (EepromStatus != HAL_OK)
{
return EepromStatus;
}
/* Transfer process: transfer variables from old to the new active page */
for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++)
{
if (VirtAddVarTab[VarIdx] != VirtAddress) /* Check each variable except the one passed as parameter */
{
/* Read the other last variable updates */
ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
/* In case variable corresponding to the virtual address was found */
if (ReadStatus != 0x1)
{
/* Transfer the variable to the new active page */
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
/* If program operation was failed, a Flash error code is returned */
if (EepromStatus != HAL_OK)
{
return EepromStatus;
}
}
}
}
pEraseInit.TypeErase = TYPEERASE_SECTORS;
pEraseInit.Sector = OldPageId;
pEraseInit.NbSectors = 1;
pEraseInit.VoltageRange = VOLTAGE_RANGE;
/* Erase the old Page: Set old Page status to ERASED status */
FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError);
/* If erase operation was failed, a Flash error code is returned */
if (FlashStatus != HAL_OK)
{
return FlashStatus;
}
/* Set new Page status to VALID_PAGE status */
FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, NewPageAddress, VALID_PAGE);
/* If program operation was failed, a Flash error code is returned */
if (FlashStatus != HAL_OK)
{
return FlashStatus;
}
/* Return last operation flash status */
return FlashStatus;
}
/**
* @brief Verify if active page is full and Writes variable in EEPROM.
* @param Address: 16 bit virtual address of the variable
* @param Data: 16 bit data to be written as variable value
* @retval Success or error status:
* - FLASH_COMPLETE: on success
* - EEPROM_PAGE_FULL: if valid page is full (need page transfer)
* - EEPROM_NO_VALID_PAGE: if no valid page was found
* - EEPROM_OUT_SIZE: if EEPROM size exceeded
* - Flash error code: on write Flash error
*/
uint16 EEPROMClass::EE_VerifyPageFullWriteVariable(uint16 Address, uint16 Data)
{
FLASH_Status FlashStatus;
uint32 idx, pageBase, pageEnd, newPage;
uint16 count;
// Get valid Page for write operation
pageBase = EE_FindValidPage();
if (pageBase == 0)
return EEPROM_NO_VALID_PAGE;
// Get the valid Page end Address
pageEnd = pageBase + PageSize; // Set end of page
for (idx = pageEnd - 2; idx > pageBase; idx -= 4)
{
if ((*(__io uint16*)idx) == Address) // Find last value for address
{
count = (*(__io uint16*)(idx - 2)); // Read last data
if (count == Data)
return EEPROM_OK;
if (count == 0xFFFF)
{
FlashStatus = FLASH_ProgramHalfWord(idx - 2, Data); // Set variable data
if (FlashStatus == FLASH_COMPLETE)
return EEPROM_OK;
}
break;
}
}
// Check each active page address starting from begining
for (idx = pageBase + 4; idx < pageEnd; idx += 4)
if ((*(__io uint32*)idx) == 0xFFFFFFFF) // Verify if element
{ // contents are 0xFFFFFFFF
FlashStatus = FLASH_ProgramHalfWord(idx, Data); // Set variable data
if (FlashStatus != FLASH_COMPLETE)
return FlashStatus;
FlashStatus = FLASH_ProgramHalfWord(idx + 2, Address); // Set variable virtual address
if (FlashStatus != FLASH_COMPLETE)
return FlashStatus;
return EEPROM_OK;
}
// Empty slot not found, need page transfer
// Calculate unique variables in page
count = EE_GetVariablesCount(pageBase, Address) + 1;
if (count >= (PageSize / 4 - 1))
return EEPROM_OUT_SIZE;
if (pageBase == PageBase1)
newPage = PageBase0; // New page address where variable will be moved to
else
newPage = PageBase1;
// Set the new Page status to RECEIVE_DATA status
FlashStatus = FLASH_ProgramHalfWord(newPage, EEPROM_RECEIVE_DATA);
if (FlashStatus != FLASH_COMPLETE)
return FlashStatus;
// Write the variable passed as parameter in the new active page
FlashStatus = FLASH_ProgramHalfWord(newPage + 4, Data);
if (FlashStatus != FLASH_COMPLETE)
return FlashStatus;
FlashStatus = FLASH_ProgramHalfWord(newPage + 6, Address);
if (FlashStatus != FLASH_COMPLETE)
return FlashStatus;
return EE_PageTransfer(newPage, pageBase, Address);
}
/**
* @brief Transfers last updated variables data from the full Page to
* an empty one.
* @param VirtAddress: 16 bit virtual address of the variable
* @param Data: 16 bit data to be written as variable value
* @retval Success or error status:
* - FLASH_COMPLETE: on success
* - PAGE_FULL: if valid page is full
* - NO_VALID_PAGE: if no valid page was found
* - Flash error code: on write Flash error
*/
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data)
{
HAL_StatusTypeDef flashstatus = HAL_OK;
uint32_t newpageaddress = EEPROM_START_ADDRESS;
uint32_t oldpageid = 0;
uint16_t validpage = PAGE0, varidx = 0;
uint16_t eepromstatus = 0, readstatus = 0;
uint32_t page_error = 0;
FLASH_EraseInitTypeDef s_eraseinit;
/* Get active Page for read operation */
validpage = EE_FindValidPage(READ_FROM_VALID_PAGE);
if (validpage == PAGE1) /* Page1 valid */
{
/* New page address where variable will be moved to */
newpageaddress = PAGE0_BASE_ADDRESS;
/* Old page ID where variable will be taken from */
oldpageid = PAGE1_ID;
}
else if (validpage == PAGE0) /* Page0 valid */
{
/* New page address where variable will be moved to */
newpageaddress = PAGE1_BASE_ADDRESS;
/* Old page ID where variable will be taken from */
oldpageid = PAGE0_ID;
}
else
{
return NO_VALID_PAGE; /* No valid Page */
}
/* Set the new Page status to RECEIVE_DATA status */
flashstatus = HAL_FLASH_Program(FLASH_TYPEPROGRAM_HALFWORD, newpageaddress, RECEIVE_DATA);
/* If program operation was failed, a Flash error code is returned */
if (flashstatus != HAL_OK)
{
return flashstatus;
}
/* Write the variable passed as parameter in the new active page */
eepromstatus = EE_VerifyPageFullWriteVariable(VirtAddress, Data);
/* If program operation was failed, a Flash error code is returned */
if (eepromstatus != HAL_OK)
{
return eepromstatus;
}
/* Transfer process: transfer variables from old to the new active page */
for (varidx = 0; varidx < NB_OF_VAR; varidx++)
{
if (VirtAddVarTab[varidx] != VirtAddress) /* Check each variable except the one passed as parameter */
{
/* Read the other last variable updates */
readstatus = EE_ReadVariable(VirtAddVarTab[varidx], &DataVar);
/* In case variable corresponding to the virtual address was found */
if (readstatus != 0x1)
{
/* Transfer the variable to the new active page */
eepromstatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[varidx], DataVar);
/* If program operation was failed, a Flash error code is returned */
if (eepromstatus != HAL_OK)
{
return eepromstatus;
}
}
}
}
s_eraseinit.TypeErase = FLASH_TYPEERASE_PAGES;
s_eraseinit.PageAddress = oldpageid;
s_eraseinit.NbPages = 1;
/* Erase the old Page: Set old Page status to ERASED status */
flashstatus = HAL_FLASHEx_Erase(&s_eraseinit, &page_error);
/* If erase operation was failed, a Flash error code is returned */
if (flashstatus != HAL_OK)
{
return flashstatus;
}
/* Set new Page status to VALID_PAGE status */
flashstatus = HAL_FLASH_Program(FLASH_TYPEPROGRAM_HALFWORD, newpageaddress, VALID_PAGE);
/* If program operation was failed, a Flash error code is returned */
if (flashstatus != HAL_OK)
{
return flashstatus;
}
/* Return last operation flash status */
return flashstatus;
}
