/**
* @brief 使用esp8266模块和EDP协议向ONENET平台发送开发板四个LED指示灯的实时状态，并通过平台或者开发板按键控制LED。
**/
int main(void)
{
//SystemInit();
LED_Init(); //LED指示灯初始化函数
KEY_Init(); //按键初始化函数
USART1_Init(); //USART1串口初始化函数
USART2_Init(); //USART2串口初始化函数
while(1)
{
LED_Switch(LED_ON,LED_R|LED_G|LED_Y|LED_B); //点亮开发板四个指示灯，表示程序进入主流程
ESP8266_Init(); //ESP8266初始化
ESP8266_DevLink(DEVICEID,APIKEY,20); //和平台建立设备连接
LED_Switch(LED_OFF,LED_R|LED_G|LED_Y|LED_B); //熄灭开发板四个指示灯，表示程序完成设备连接，进入数据发送循环
while(1)
{
if(!(ESP8266_CheckStatus(30))) //检测ESP8266模块连接状态
{
ESP8266_SendDat(); //向平台发送数据
}
else
{
break;
}
}
}
}
int main(void)
{
USART1_Init();
USART2_Init();
mDelay(1000);
Hal_I2C_Init();
/*初始化8266，并连接CWJAP配置的AP，与MQTT_CIPSTART配置的服务器建立TCP连接*/
ESP8266_Init((int8_t *)MQTT_CIPSTART, (int8_t *)CWJAP);
/*进入MQTT协议测试主循环*/
MQTT_Loop();
}
int main(void)
{
uint16_t temp, humi; //温湿度
char HTTP_Buf[400]; //HTTP报文缓存区
char tempStr[5]; //字符串格式温度
char humiStr[5]; //字符串格式湿度
int len;
USART1_Config(); //USART1作为调试串口
USART2_Config(); //USART2用于连接ESP8266模块
Hal_I2C_Init(); //I2C初始化，用于连接温湿度传感器
ESP8266_Init(); //ESP8266初始化
printf("ESP8266 init over\r\n");
//SHT20_loop(); //
while(1)
{
/* 获取温湿度 */
SHT2x_MeasureHM(SHT20_Measurement_T_HM, &temp);
mDelay(500);
SHT2x_MeasureHM(SHT20_Measurement_RH_HM, &humi);
/* 转化为字符串形式 */
sprintf(tempStr, "%d", temp);
sprintf(humiStr, "%d", humi);
//printf("%s %s\r\n", tempStr, humiStr);
USART2_Clear();
len = HTTP_PostPkt(HTTP_Buf, API_KEY, DEV_ID, "temp", tempStr); //HTTP组包
USART2_Write(USART2, (unsigned char *)(HTTP_Buf), len); //报文发送
printf("send HTTP msg:\r\n%s\r\n", HTTP_Buf);
mDelay(1000);
printf("rcv response:\r\n%s\r\n", usart2_rcv_buf);
USART2_Clear();
len = HTTP_PostPkt(HTTP_Buf, API_KEY, DEV_ID, "humi", humiStr); //HTTP组包
USART2_Write(USART2, (unsigned char *)(HTTP_Buf), len); //报文发送
printf("send HTTP msg:\r\n%s\r\n", HTTP_Buf);
mDelay(1000);
printf("rcv response:\r\n%s\r\n", usart2_rcv_buf);
mDelay(5000);
}
}
int main() {
u16 PM25Val;
short temperature;
SysTick_Init();
pc1.baud(115200);
ESP8266_Init();
while(1){
PM25Val=GP2Y1010auGetPM25();
pc1.printf("Dust Value is: %d ug/m3\r\n",PM25Val);
ESP8266_Ds18b20UpdateLeWei50(PM25Val);
}
pc1.printf("Start DS18B20 Init ...");
while(DS18B20_Init())
{
wait_ms(1000);
pc1.printf("DS18B20 Init Ing...");
}
while(1){
temperature=DS18B20_Get_Temp();
pc1.printf("Get Temperature : %.1f\n",temperature/10.0);
wait_ms(1000);
}
}
int main(void) {
/* Init system */
TM_RCC_InitSystem();
/* Init HAL layer */
HAL_Init();
/* Init leds */
TM_DISCO_LedInit();
/* Init button */
TM_DISCO_ButtonInit();
/* Init delay */
TM_DELAY_Init();
/* Init debug USART */
TM_USART_Init(USART2, TM_USART_PinsPack_1, 921600);
/* Display message */
printf("ESP8266 AT commands parser\r\n");
/* Init ESP module */
while (ESP8266_Init(&ESP8266, 115200) != ESP_OK) {
printf("Problems with initializing module!\r\n");
}
/* Set mode to STA+AP */
while (ESP8266_SetMode(&ESP8266, ESP8266_Mode_STA_AP) != ESP_OK);
/* Enable server on port 80 */
while (ESP8266_ServerEnable(&ESP8266, 80) != ESP_OK);
/* Module is connected OK */
printf("Initialization finished!\r\n");
/* Disconnect from wifi if connected */
ESP8266_WifiDisconnect(&ESP8266);
#if ESP8266_USE_APSEARCH
/* Get a list of all stations */
ESP8266_ListWifiStations(&ESP8266);
#endif
/* Wait till finishes */
ESP8266_WaitReady(&ESP8266);
/* Connect to wifi and save settings */
ESP8266_WifiConnect(&ESP8266, "YOUR SSID", "SSID PASSWORD");
/* Wait till finish */
ESP8266_WaitReady(&ESP8266);
/* Get connected devices */
ESP8266_WifiGetConnected(&ESP8266);
while (1) {
/* Update ESP module */
ESP8266_Update(&ESP8266);
/* Check for button */
if (TM_DISCO_ButtonOnPressed()) {
/* Starting with connection to web */
while (ESP8266_StartClientConnection(&ESP8266, "stm32f4_discovery", "stm32f4-discovery.com", 80, NULL));
}
}
}
int main(void){
char* lab_greeting = "Smart \"Mirror\"!";
DisableInterrupts();
PLL_Init(Bus80MHz);
Output_Init(); // UART0 only used for debugging
ST7735_Output_Init();
PortF_Init();
PortE_Init();
printf("\n\r-----------\n\rSystem starting...\n\r");
ESP8266_Init(115200); // connect to access point, set up as client
ESP8266_GetVersionNumber();
while(1){
if(last_mode != mode){
refresh =1;
last_mode = mode;
memset(ResponseJson, 0, SERVER_RESPONSE_SIZE * sizeof(ResponseJson[0]));
}
if(mode==0&&refresh){
refresh = 0;
ST7735_FillScreen(0);
ST7735_DrawString(0,0, lab_greeting, ST7735_WHITE);
ST7735_DrawString(0,1, "MODE: WEATHER", ST7735_GREEN);
ESP8266_GetStatus();
if(ESP8266_MakeTCPConnection("kylepolansky.dyndns.org")){ // open socket in server
LED_GreenOn();
ESP8266_SendTCP(Fetch_Kyle);
}
ESP8266_CloseTCPConnection();
ParseWeather(ResponseJson);
printf("START RESPONSE\n");
printf(ResponseJson);
printf("STOP RESPONSE\n");
}
else if(mode==1&&refresh){
refresh = 0;
ST7735_FillScreen(0);
ST7735_DrawString(0,0, lab_greeting, ST7735_WHITE);
ST7735_DrawString(0,1, "MODE: TIME", ST7735_GREEN);
ESP8266_GetStatus();
if(ESP8266_MakeTCPConnection("kylepolansky.dyndns.org")){ // open socket in server
LED_GreenOn();
ESP8266_SendTCP(Fetch_Kyle);
}
ESP8266_CloseTCPConnection();
ParseTime(ResponseJson);
printf("START RESPONSE\n");
printf(ResponseJson);
printf("STOP RESPONSE\n");
}
else if(mode==2&&refresh){
refresh = 0;
ST7735_FillScreen(0);
ST7735_DrawString(0,0, lab_greeting, ST7735_WHITE);
ST7735_DrawString(0,1, "MODE: REMINDERS", ST7735_GREEN);
ESP8266_GetStatus();
if(ESP8266_MakeTCPConnection("kylepolansky.dyndns.org")){ // open socket in server
LED_GreenOn();
ESP8266_SendTCP(Fetch_Kyle);
}
ESP8266_CloseTCPConnection();
ParseReminders(ResponseJson);
printf("START RESPONSE\n");
printf(ResponseJson);
printf("STOP RESPONSE\n");
}
else if(mode==3&&refresh){
refresh = 0;
ST7735_FillScreen(0);
ST7735_DrawString(0,0, lab_greeting, ST7735_WHITE);
ST7735_DrawString(0,1, "MODE: NEWS", ST7735_GREEN);
ESP8266_GetStatus();
if(ESP8266_MakeTCPConnection("kylepolansky.dyndns.org")){ // open socket in server
LED_GreenOn();
ESP8266_SendTCP(Fetch_Kyle);
}
ESP8266_CloseTCPConnection();
ParseHeadline(ResponseJson);
printf("START RESPONSE\n");
printf(ResponseJson);
printf("STOP RESPONSE\n");
}
else if(mode==4&&refresh){
refresh = 0;
ST7735_FillScreen(0);
ST7735_DrawString(0,0, lab_greeting, ST7735_WHITE);
ST7735_DrawString(0,1, "MODE: STOCK", ST7735_GREEN);
ESP8266_GetStatus();
if(ESP8266_MakeTCPConnection("kylepolansky.dyndns.org")){ // open socket in server
LED_GreenOn();
ESP8266_SendTCP(Fetch_Kyle);
}
ESP8266_CloseTCPConnection();
ParseStock(ResponseJson);
printf("START RESPONSE\n");
printf(ResponseJson);
printf("STOP RESPONSE\n");
}
}
}
