C++ (Cpp) EXYNOS4_GPL2 Examples

Example #1

File: board-smdk4x12-usb.c Project: 253627764/GT-I9500

void __init exynos4_smdk4x12_usb_init(void)
{
#ifndef CONFIG_EXYNOS_USB_SWITCH
#if defined(CONFIG_USB_EHCI_S5P) || defined(CONFIG_USB_OHCI_EXYNOS)
	if (gpio_request_one(EXYNOS4_GPL2(0), GPIOF_OUT_INIT_HIGH,
		"UHOST_VBUSCTRL") < 0)
		printk(KERN_ERR "failed to request UHOST_VBUSCTRL\n");
	else
		gpio_free(EXYNOS4_GPL2(0));
#endif
#endif
	smdk4x12_ohci_init();
	smdk4x12_ehci_init();
	smdk4x12_hsotg_init();

	platform_add_devices(smdk4x12_usb_devices,
			ARRAY_SIZE(smdk4x12_usb_devices));
}

Example #2

File: setup-keypad.c Project: TOPEET-Develop/iTop4412_kernel_public_merge

void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
	/* Keypads can be of various combinations, Just making sure */
#if defined(CONFIG_CPU_TYPE_SCP_SUPPER) || defined(CONFIG_CPU_TYPE_POP_SUPPER) || defined(CONFIG_CPU_TYPE_POP2G_SUPPER)
	/* Set all the necessary GPX2 pins: KP_ROW[x] */
	s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 2,
					 S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);

	/*GPL2: KP_COL[x] */
	s3c_gpio_cfgrange_nopull(EXYNOS4_GPL2(0), 1, S3C_GPIO_SFN(3));
#elif  defined(CONFIG_CPU_TYPE_SCP_ELITE) || defined(CONFIG_CPU_TYPE_POP_ELITE) || defined(CONFIG_CPU_TYPE_POP2G_ELITE)
	//ROW_6
	s3c_gpio_cfgall_range(EXYNOS4_GPX2(6), 1,
                                         S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);

	//ROW_7
	s3c_gpio_cfgall_range(EXYNOS4_GPX2(7), 1,
                                         S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);

	//ROW_8
	s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), 1,
                                         S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);

	//ROW_13
	s3c_gpio_cfgall_range(EXYNOS4_GPX3(5), 1,
                                         S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);

	//COL_0
	s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(0), 1, S3C_GPIO_SFN(3));

	//COL_3
	s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(3), 1, S3C_GPIO_SFN(3));

	//COL_5
	s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(5), 1, S3C_GPIO_SFN(3));

	//COL_6
	s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(6), 1, S3C_GPIO_SFN(3));
#endif
}

Example #3

File: u1camera-gpio.c Project: 0x7678/SJKernel-gn2

	{EXYNOS4_GPK3(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},

	{EXYNOS4_GPL0(0), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4_GPL0(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL0(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL0(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4_GPL0(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4_GPL0(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL0(6), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4_GPL0(7), S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE},

	{EXYNOS4_GPL1(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL1(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL1(2), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},

	{EXYNOS4_GPL2(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(2), S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE},
	{EXYNOS4_GPL2(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4_GPL2(4), S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4_GPL2(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},
	{EXYNOS4_GPL2(6), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(7), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

	{EXYNOS4_GPY0(0), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(1), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(2), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(3), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(4), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(5), S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

Example #4

File: gpio-exynos4.c Project: Hackhao/tzos

		},
	}, {
		.base   = (S5P_VA_GPIO2 + 0xE0),
		.eint_offset = 0x1C,
		.group	= 21,
		.chip	= {
			.base	= EXYNOS4_GPL1(0),
			.ngpio	= EXYNOS4_GPIO_L1_NR,
			.label	= "GPL1",
		},
	}, {
		.base   = (S5P_VA_GPIO2 + 0x100),
		.eint_offset = 0x20,
		.group	= 22,
		.chip	= {
			.base	= EXYNOS4_GPL2(0),
			.ngpio	= EXYNOS4_GPIO_L2_NR,
			.label	= "GPL2",
		},
	}, {
		.base   = (S5P_VA_GPIO2 + 0x120),
		.config	= &gpio_cfg_noint,
		.chip	= {
			.base	= EXYNOS4_GPY0(0),
			.ngpio	= EXYNOS4_GPIO_Y0_NR,
			.label	= "GPY0",
		},
	}, {
		.base   = (S5P_VA_GPIO2 + 0x140),
		.config	= &gpio_cfg_noint,
		.chip	= {

Example #5

File: tab3-gpio.c Project: pileiba/s4zoomkernel

		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPF3(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPF3(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPF3(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */

	{EXYNOS4_GPL0(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* PS_ALS_SCL_1.8V */
	{EXYNOS4_GPL0(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* PS_ALS_SDA_1.8V */

#endif
#if defined(CONFIG_QC_MODEM)
	{EXYNOS4_GPL2(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* BUCK2_SEL */
	{EXYNOS4_GPL2(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* BUCK3_SEL */
#endif

	{EXYNOS4_GPX0(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* ACC_INT */
	{EXYNOS4_GPX0(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* NC */
	{EXYNOS4_GPX0(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* PS_ALS_INT */
	{EXYNOS4_GPX0(3), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* DET_3.5 */
	{EXYNOS4_GPX0(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_NONE, S5P_GPIO_DRVSTR_LV1}, /* DOCK_INT */

Example #6

File: itop4412_leds.c Project: TOPEET-Develop/iTop4412_kernel_public_merge

//#include "gps.h"
#include <linux/delay.h>

#define LEDS_DEBUG
#ifdef LEDS_DEBUG
#define DPRINTK(x...) printk("LEDS_CTL DEBUG:" x)
#else
#define DPRINTK(x...)
#endif

#define DRIVER_NAME "leds"


#if  defined(CONFIG_CPU_TYPE_SCP_ELITE) || defined(CONFIG_CPU_TYPE_POP_ELITE) || defined(CONFIG_CPU_TYPE_POP2G_ELITE)
static int led_gpios[] = {
	EXYNOS4_GPL2(0),
	EXYNOS4_GPK1(1),
};

#elif defined(CONFIG_CPU_TYPE_SCP_SUPPER) || defined(CONFIG_CPU_TYPE_POP_SUPPER) || defined(CONFIG_CPU_TYPE_POP2G_SUPPER)


static int led_gpios[] = {
#if defined(CONFIG_MTK_COMBO_COMM) || defined(CONFIG_MTK_COMBO_COMM_MODULE)
	EXYNOS4_GPC0(2),
#else
	EXYNOS4_GPX2(5),
#endif
	EXYNOS4_GPX0(1),
};

Example #7

File: p4note-gpio.c Project: 123good/ninphetamine3

	{EXYNOS4_GPL0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* PS_ALS_SDA_1.8V */
	{EXYNOS4_GPL0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC(IRDA_CONTROL) */
	{EXYNOS4_GPL0(4),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* HDMI_EN */
/*	{EXYNOS4_GPL0(5),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */
	{EXYNOS4_GPL0(6),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
/*	{EXYNOS4_GPL0(7),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */

#if defined(CONFIG_SEC_MODEM)
	{EXYNOS4_GPL1(0),  S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* PDA_ACTIVE */
#else
	{EXYNOS4_GPL1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
#endif
	{EXYNOS4_GPL1(1),  S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* 3M_nRST */
/*	{EXYNOS4_GPL1(2),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, */

	{EXYNOS4_GPL2(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4_GPL2(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
#if defined(CONFIG_MACH_C1) || defined(CONFIG_MACH_C1VZW)
	/* GLP2(4) CMC_CPU_RESET, hold high */
	{EXYNOS4_GPL2(4),  S3C_GPIO_SLP_OUT1, S3C_GPIO_PULL_NONE}, /* NC */
#else
	{EXYNOS4_GPL2(4),  S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* MOTOR_EN */
#endif
	{EXYNOS4_GPL2(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* CP_ON(NC) */
	{EXYNOS4_GPL2(6),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4_GPL2(7),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* UART_SEL */

	{EXYNOS4_GPY0(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4_GPY0(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},

Example #8

File: baffin-gpio.c Project: HAXTC/android_kernel_samsung_n7000

	{EXYNOS4_GPL0(3),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* GPIO_FM34_PWDN */
#elif defined(CONFIG_MACH_SUPERIOR_KOR_SKT)
	{EXYNOS4_GPL0(3),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* LINEOUT_EN */
#else
	{EXYNOS4_GPL0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
#endif
	{EXYNOS4_GPL0(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
/*	{EXYNOS4_GPL0(5),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */
	{EXYNOS4_GPL0(6),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, /* BT_EN */
/*	{EXYNOS4_GPL0(7),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */

	{EXYNOS4_GPL1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL1(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
/*	{EXYNOS4_GPL1(2),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, */

	{EXYNOS4_GPL2(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* GYRO_DE */
	{EXYNOS4_GPL2(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* GPS_nRST */
	{EXYNOS4_GPL2(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* GPS_EN */
	{EXYNOS4_GPL2(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(4),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},  /* CMC221_CPU_RST */
	{EXYNOS4_GPL2(5),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},  /* CMC_PMIC_PWRON */
	{EXYNOS4_GPL2(6),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, /* NFC_EN */
	{EXYNOS4_GPL2(7),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NFC_FIRMWARE */

#if defined(CONFIG_MACH_BAFFIN_KOR_LGT)
	{EXYNOS4_GPY0(0),  S3C_GPIO_SLP_OUT1, S3C_GPIO_PULL_NONE}, /* DPRAM_CSN */
	{EXYNOS4_GPY0(1),  S3C_GPIO_SLP_OUT1, S3C_GPIO_PULL_NONE}, /* VIA_DPRAM_CSN */
	{EXYNOS4_GPY0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(4),  S3C_GPIO_SLP_OUT1, S3C_GPIO_PULL_NONE}, /* DPRAM_REN */
	{EXYNOS4_GPY0(5),  S3C_GPIO_SLP_OUT1, S3C_GPIO_PULL_NONE}, /* DPRAM_WEN */

Example #9

File: gc1-gpio.c Project: Lukiqq/GT-I9100-Galaxian-ICS-Kernel

	{EXYNOS4_GPK3(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},

	{EXYNOS4_GPL0(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL0(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL0(3),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4_GPL0(4),  S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE},
/*	{EXYNOS4_GPL0(5),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */
	{EXYNOS4_GPL0(6),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
/*	{EXYNOS4_GPL0(7),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */

	{EXYNOS4_GPL1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL1(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
/*	{EXYNOS4_GPL1(2),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, */

	{EXYNOS4_GPL2(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4_GPL2(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4_GPL2(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(7),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

	{EXYNOS4_GPY0(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

Example #10

File: watch-gpio.c Project: Andro-Boy/Googy-Max2-Kernel

	{EXYNOS4_GPK3(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},

	{EXYNOS4_GPL0(0),  S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* USB_HUB_RST */
	{EXYNOS4_GPL0(1),  S3C_GPIO_SLP_INPUT,	S3C_GPIO_PULL_DOWN}, /* TOUCH_SCL */
	{EXYNOS4_GPL0(2),  S3C_GPIO_SLP_INPUT,	S3C_GPIO_PULL_DOWN}, /* TOUCH_SDA */
	{EXYNOS4_GPL0(3),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, /* POGO_VBATT_EN */
	{EXYNOS4_GPL0(4),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, /* POGO_VBUS_EN */
/*	{EXYNOS4_GPL0(5),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */
	{EXYNOS4_GPL0(6),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, /* BT_EN */
/*	{EXYNOS4_GPL0(7),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */

	{EXYNOS4_GPL1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* USB_HUB_SCL */
	{EXYNOS4_GPL1(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE}, /* USB_HUB_SDA */
/*	{EXYNOS4_GPL1(2),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, */

	{EXYNOS4_GPL2(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4_GPL2(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(4),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},  /* CMC221_CPU_RST */
	{EXYNOS4_GPL2(5),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},  /* CMC_PMIC_PWRON */
	{EXYNOS4_GPL2(6),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4_GPL2(7),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},

	{EXYNOS4_GPY0(0),  S3C_GPIO_SLP_OUT1, S3C_GPIO_PULL_NONE},  /* DPRAM_CSN */
	{EXYNOS4_GPY0(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPY0(4),  S3C_GPIO_SLP_OUT1, S3C_GPIO_PULL_NONE},  /* DPRAM_REN */
	{EXYNOS4_GPY0(5),  S3C_GPIO_SLP_OUT1, S3C_GPIO_PULL_NONE},  /* DPRAM_WEN */

Example #11

File: zest-gpio.c Project: LuckJC/Adam-Kernel-GS3

    {EXYNOS4_GPK3(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},

    {EXYNOS4_GPL0(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */  // ??
    {EXYNOS4_GPL0(1),  S3C_GPIO_SLP_INPUT,	S3C_GPIO_PULL_DOWN}, /* TOUCH_SCL */
    {EXYNOS4_GPL0(2),  S3C_GPIO_SLP_INPUT,	S3C_GPIO_PULL_DOWN}, /* TOUCH_SDA */
    {EXYNOS4_GPL0(3),  S3C_GPIO_SLP_INPUT,  S3C_GPIO_PULL_DOWN}, /* VPS_SOUND_EN */
    {EXYNOS4_GPL0(4),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* HDMI_EN */
    /*	{EXYNOS4_GPL0(5),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */
    {EXYNOS4_GPL0(6),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, /* BT_EN */
    /*	{EXYNOS4_GPL0(7),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */

    {EXYNOS4_GPL1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */  //??
    {EXYNOS4_GPL1(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */  //??
    /*	{EXYNOS4_GPL1(2),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, */

    {EXYNOS4_GPL2(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* GYRO_DE */
    {EXYNOS4_GPL2(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4_GPL2(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* GPS_EN */
    {EXYNOS4_GPL2(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* WLAN_WAKE */
    {EXYNOS4_GPL2(4),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},  /* CP_RESETn */
    {EXYNOS4_GPL2(5),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},  /* CP_PMIC_PWR_EN */
    {EXYNOS4_GPL2(6),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, /* NFC_EN */
    {EXYNOS4_GPL2(7),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NFC_FIRMWARE */

    {EXYNOS4_GPY0(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4_GPY0(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4_GPY0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4_GPY0(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4_GPY0(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
    {EXYNOS4_GPY0(5),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */

Example #12

File: kona-01-gpio.c Project: DirtyDroidX/Kernel_Kona_att

	{EXYNOS4_GPF0(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1},
	{EXYNOS4_GPF0(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1},

#if defined(CONFIG_QC_MODEM)
	{EXYNOS4_GPF3(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* BUCK2_SEL */
	{EXYNOS4_GPF3(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* BUCK3_SEL */
	{EXYNOS4_GPF3(2), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* BUCK4_SEL */
#endif

	{EXYNOS4_GPL2(4), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* MOTOR_EN -> NC */
	{EXYNOS4_GPL2(5), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* ACCESSORY_EN -> NC */
	{EXYNOS4_GPL2(6), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* UART_SEL -> NC */

	{EXYNOS4212_GPM4(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
			S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1},	/* ADC_I2C_SCL -> NC */
	{EXYNOS4212_GPM4(1), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
			S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1},	/* ADC_I2C_SDA -> NC */
	{EXYNOS4212_GPM4(6), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
			S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1},	/* USB_OTG_EN -> NC */

	{EXYNOS4_GPX0(0), S3C_GPIO_INPUT, S3C_GPIO_SETPIN_NONE,
		S3C_GPIO_PULL_DOWN, S5P_GPIO_DRVSTR_LV1}, /* ADC_INT */

Example #13

File: gc2pd-gpio.c Project: CyanideL/android_kernel_samsung_smdk4x12

	{EXYNOS4_GPK3(6),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_NONE},

	{EXYNOS4_GPL0(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL0(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL0(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL0(3),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
	{EXYNOS4_GPL0(4),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE}, /* HDMI_EN*/
/*	{EXYNOS4_GPL0(5),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */
	{EXYNOS4_GPL0(6),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE},
/*	{EXYNOS4_GPL0(7),  S3C_GPIO_SLP_OUT0,  S3C_GPIO_PULL_NONE}, */

	{EXYNOS4_GPL1(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL1(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
/*	{EXYNOS4_GPL1(2),  S3C_GPIO_SLP_PREV,  S3C_GPIO_PULL_NONE}, */

	{EXYNOS4_GPL2(0),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(1),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
	{EXYNOS4_GPL2(2),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
	{EXYNOS4_GPL2(3),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN}, /* NC */
#if defined(CONFIG_SEC_MODEM_GC2_ATT)
	{EXYNOS4_GPL2(4),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},
#else
	{EXYNOS4_GPL2(4),  S3C_GPIO_SLP_INPUT, S3C_GPIO_PULL_DOWN},
#endif
#if defined(CONFIG_MACH_GC1_USA_VZW) || defined(CONFIG_MACH_GC1_KOR_SKT) ||\
	defined(CONFIG_MACH_GC1_KOR_KT) || defined(CONFIG_MACH_GC1_KOR_LGT)
	/* AP2MDM_PON_RESET_N */
	{EXYNOS4_GPL2(5),  S3C_GPIO_SLP_PREV, S3C_GPIO_PULL_NONE},
#elif defined(CONFIG_SEC_MODEM_SP7160LTE)
	{EXYNOS4_GPL2(5),  S3C_GPIO_SLP_OUT0, S3C_GPIO_PULL_NONE}, /* GPIO_PHONE_ON */
#elif defined(CONFIG_SEC_MODEM_GC2_ATT) || defined(CONFIG_GC2PD_LTE_EUR_OPEN)