static u32 exynos_usb_phy30_set_clock(struct platform_device *pdev,
enum usb_phy30_clk_type clk_type)
{
u32 reg, refclk;
switch (clk_type) {
case EXYNOS5250_REV0_CLK:
/* 100MHz diff pad clock */
reg = (EXYNOS_USB3_PHYCLKRST_REFCLKSEL(2) |
EXYNOS_USB3_PHYCLKRST_FSEL(0x27) |
EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(0x19) |
EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL(0x00));
break;
case DEFAULT_CLK:
default:
refclk = exynos_usb_phy_set_clock(pdev);
reg = EXYNOS_USB3_PHYCLKRST_REFCLKSEL(3) |
EXYNOS_USB3_PHYCLKRST_FSEL(refclk);
switch(refclk){
case EXYNOS5_CLKSEL_50M:
reg |= (EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(0x02) |
EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL(0x00));
break;
case EXYNOS5_CLKSEL_20M:
reg |= (EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(0x7d) |
EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL(0x00));
break;
case EXYNOS5_CLKSEL_19200K:
reg |= (EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(0x02) |
EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL(0x88));
break;
case EXYNOS5_CLKSEL_24M:
default:
reg |= (EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(0x68) |
EXYNOS_USB3_PHYCLKRST_SSC_REF_CLK_SEL(0x88));
break;
}
break;
}
return reg;
}
static int exynos5_usb_phy30_init(struct platform_device *pdev)
{
u32 reg;
exynos4_usb_phy_control(USB_PHY0, PHY_ENABLE);
/* Reset USB 3.0 PHY */
writel(0x087fffc0, EXYNOS_USB3_LINKSYSTEM);
writel(0x00000000, EXYNOS_USB3_PHYREG0);
writel(0x24d4e6e4, EXYNOS_USB3_PHYPARAM0);
writel(0x03fff815, EXYNOS_USB3_PHYPARAM1);
writel(0x00000000, EXYNOS_USB3_PHYBATCHG);
writel(0x00000000, EXYNOS_USB3_PHYRESUME);
/* REVISIT : Over-current pin is inactive on SMDK5250 */
if (soc_is_exynos5250())
writel((readl(EXYNOS_USB3_LINKPORT) & ~(0x3<<4)) |
(0x3<<2), EXYNOS_USB3_LINKPORT);
/* UTMI Power Control */
writel(EXYNOS_USB3_PHYUTMI_OTGDISABLE, EXYNOS_USB3_PHYUTMI);
/* Set 100MHz external clock */
reg = EXYNOS_USB3_PHYCLKRST_PORTRESET |
/* HS PLL uses ref_pad_clk{p,m} or ref_alt_clk_{p,m}
* as reference */
EXYNOS_USB3_PHYCLKRST_REFCLKSEL(2) |
/* Digital power supply in normal operating mode */
EXYNOS_USB3_PHYCLKRST_RETENABLEN |
/* 0x27-100MHz, 0x2a-24MHz, 0x31-20MHz, 0x38-19.2MHz */
EXYNOS_USB3_PHYCLKRST_FSEL(0x27) |
/* 0x19-100MHz, 0x68-24MHz, 0x7d-20Mhz */
EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(0x19) |
/* Enable ref clock for SS function */
EXYNOS_USB3_PHYCLKRST_REF_SSP_EN |
/* Enable spread spectrum */
EXYNOS_USB3_PHYCLKRST_SSC_EN;
writel(reg, EXYNOS_USB3_PHYCLKRST);
udelay(10);
reg &= ~(EXYNOS_USB3_PHYCLKRST_PORTRESET);
writel(reg, EXYNOS_USB3_PHYCLKRST);
return 0;
}
static int exynos5_usb_phy30_init(struct platform_device *pdev)
{
u32 reg;
bool use_ext_clk = true;
exynos_usb_phy_control(USB_PHY0, PHY_ENABLE);
/* Reset USB 3.0 PHY */
writel(0x00000000, EXYNOS_USB3_PHYREG0);
writel(0x24d4e6e4, EXYNOS_USB3_PHYPARAM0);
writel(0x03fff820, EXYNOS_USB3_PHYPARAM1);
writel(0x00000000, EXYNOS_USB3_PHYRESUME);
if (soc_is_exynos5250() && samsung_rev() < EXYNOS5250_REV_1_0) {
writel(0x087fffc0, EXYNOS_USB3_LINKSYSTEM);
writel(0x00000000, EXYNOS_USB3_PHYBATCHG);
/* Over-current pin is inactive on SMDK5250 rev 0.0 */
writel((readl(EXYNOS_USB3_LINKPORT) & ~(0x3<<4)) |
(0x3<<2), EXYNOS_USB3_LINKPORT);
} else {
writel(0x08000000, EXYNOS_USB3_LINKSYSTEM);
writel(0x00000004, EXYNOS_USB3_PHYBATCHG);
#ifdef CONFIG_USB_EXYNOS_SWITCH
writel(readl(EXYNOS_USB3_LINKPORT) |
(0xf<<2), EXYNOS_USB3_LINKPORT);
#endif
/* REVISIT :use externel clock 100MHz */
if (use_ext_clk)
writel(readl(EXYNOS_USB3_PHYPARAM0) | (0x1<<31),
EXYNOS_USB3_PHYPARAM0);
else
writel(readl(EXYNOS_USB3_PHYPARAM0) & ~(0x1<<31),
EXYNOS_USB3_PHYPARAM0);
}
/* UTMI Power Control */
writel(EXYNOS_USB3_PHYUTMI_OTGDISABLE, EXYNOS_USB3_PHYUTMI);
/* Set 100MHz external clock */
reg = EXYNOS_USB3_PHYCLKRST_PORTRESET |
/* HS PLL uses ref_pad_clk{p,m} or ref_alt_clk_{p,m}
* as reference */
EXYNOS_USB3_PHYCLKRST_REFCLKSEL(2) |
/* Digital power supply in normal operating mode */
EXYNOS_USB3_PHYCLKRST_RETENABLEN |
/* 0x27-100MHz, 0x2a-24MHz, 0x31-20MHz, 0x38-19.2MHz */
EXYNOS_USB3_PHYCLKRST_FSEL(0x27) |
/* 0x19-100MHz, 0x68-24MHz, 0x7d-20Mhz */
EXYNOS_USB3_PHYCLKRST_MPLL_MULTIPLIER(0x19) |
/* Enable ref clock for SS function */
EXYNOS_USB3_PHYCLKRST_REF_SSP_EN |
/* Enable spread spectrum */
EXYNOS_USB3_PHYCLKRST_SSC_EN;
if (!(soc_is_exynos5250() && samsung_rev() < EXYNOS5250_REV_1_0))
reg |= EXYNOS_USB3_PHYCLKRST_COMMONONN;
writel(reg, EXYNOS_USB3_PHYCLKRST);
udelay(10);
reg &= ~(EXYNOS_USB3_PHYCLKRST_PORTRESET);
writel(reg, EXYNOS_USB3_PHYCLKRST);
return 0;
}
