static int ss801u_flush(struct file *file, fl_owner_t id)
{
usb_ss801u *dev;
int res;
printk(KERN_INFO "Patrick-> ss801u_flush start\n");
dev = (usb_ss801u *)file->private_data;
if (dev == NULL)
return -ENODEV;
/* wait for io to stop */
mutex_lock(&dev->io_mutex);
/* ss801u_draw_down(dev); */
/* read out errors, leave subsequent opens a clean slate */
spin_lock_irq(&dev->err_lock);
res = dev->errors ? (dev->errors == -EPIPE ? -EPIPE : -EIO) : 0;
dev->errors = 0;
spin_unlock_irq(&dev->err_lock);
mutex_unlock(&dev->io_mutex);
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=flush= res %d", res);
printk(KERN_INFO "Patrick-> ss801u_flush finish\n");
return res;
}
static int ss801u_release(struct inode *inode, struct file *file)
{
usb_ss801u *dev;
printk(KERN_INFO "Patrick-> ss801u_release start\n");
dev = (usb_ss801u *)file->private_data;
if (dev == NULL)
return -ENODEV;
/* allow the device to be autosuspended */
mutex_lock(&dev->io_mutex);
/* usb_autopm_put_interface(dev->interface); */
if (!--dev->open_count && dev->interface) {
/* usb_autopm_disable(dev->interface); */
/* usb_autopm_put_interface(dev->interface); */
ss801u_fasync(-1, file, 0);
}
mutex_unlock(&dev->io_mutex);
/* decrement the count on our device */
kref_put(&dev->kref, ss801u_delete);
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=RELEEASE=\r\n");
printk(KERN_INFO "Patrick-> ss801u_release finish\n");
return 0;
}
static int ss801u_fasync(int fd, struct file *filp, int mode)
{
usb_ss801u *dev = (usb_ss801u *)filp->private_data;
int iret = 0;
printk(KERN_INFO "Patrick-> ss801u_fasync start\n");
/* sprintf(g_dbgbuf, "=fasync=\r\n"); */
/* ----- release async signal pipe */
if (-1 == fd && 0 == mode) {
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "\r\n=FASYNC= relase \r\n");
iret = fasync_helper(fd, filp, mode, &dev->async_suspend);
iret = fasync_helper(fd, filp, mode, &dev->async_resume);
iret = fasync_helper(fd, filp, mode, &dev->async_disconnect);
dev->async_suspend = dev->async_resume = dev->async_disconnect = NULL;
} else if (0 != mode) { /* ----- create async signal pipe */
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "\r\n=FASYNC= type ? %d \r\n", dev->sig_type);
switch (dev->sig_type) {
case SIG_SUSPEND:
if (!dev->async_suspend) {
iret = fasync_helper(fd, filp, mode, &dev->async_suspend);
dev->sig_type = SIG_UNKNOW;
}
break;
case SIG_RESUME:
if (!dev->async_resume) {
iret = fasync_helper(fd, filp, mode, &dev->async_resume);
dev->sig_type = SIG_UNKNOW;
}
break;
case SIG_DISCONNECT:
if (!dev->async_disconnect) {
iret = fasync_helper(fd, filp, mode, &dev->async_disconnect);
dev->sig_type = SIG_UNKNOW;
}
break;
case SIG_UNKNOW:
default:
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=FASYNC= type unknow \r\n");
break;
}
}
printk(KERN_INFO "Patrick-> ss801u_fasync finish\n");
return iret;
}
int Egis_Reset_device(usb_ss801u *dev)
{
int lock, ret;
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "\r\n=RESET_DEVICE=\r\n");
lock = usb_lock_device_for_reset(dev->udev, dev->interface);
if (lock < 0) {
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=RESET_DEVICE= locking device failed: %d\r\n", lock);
return lock;
}
ret = usb_reset_device(dev->udev);
if (ret < 0)
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=RESET_DEVICE= reset device failed: %d\r\n", ret);
if (lock)
usb_unlock_device(dev->udev);
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "\r\n=RESET_DEVICE= Finish\r\n");
return ret;
}
static ssize_t ss801u_read(struct file *file, char *buffer, size_t count, loff_t *ppos)
{
usb_ss801u *dev;
int retval = 0;
int bytes_read;
char *kbuf;
printk(KERN_INFO "Patrick-> ss801u_read start\n");
dev = (usb_ss801u *)file->private_data;
mutex_lock(&dev->io_mutex);
/*----- To NOT go to suspend ----- */
usb_autopm_get_interface(dev->interface);
if (!dev->interface) { /* disconnect() was called */
retval = -ENODEV;
goto exit;
}
/* --------------- CASE1 : only return driver version ----------------------- */
/* -------------------------------------------------------------------------- */
if (dev->bReadTwice) {
dev->bReadTwice = false;
goto exit;
}
kbuf = kzalloc(count, GFP_KERNEL);
if (!kbuf)
goto exit;
sprintf(kbuf, "%s v%s\r\n", NAME_EGISDRIVER, dev->version.vstring);
bytes_read = strlen(kbuf);
if (copy_to_user(buffer, kbuf, bytes_read)) {
retval = 0;
} else {
retval = count;
ppos += bytes_read;
dev->bReadTwice = true;
}
kfree(kbuf);
/*/
//----------------------- CASE2 : bulk read --------------------------------//
//----------------------- ---------------------------------------------------//
//----- do a blocking bulk read to get data from the device -----/
retval = usb_bulk_msg(
dev->udev,
usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr),
dev->bulk_in_buffer,
min(dev->bulk_in_size, count),
&bytes_read, 10000
);
//----- if the read was successful, copy the data to userspace -----//
if (!retval) {
if (copy_to_user(buffer, dev->bulk_in_buffer , bytes_read))
retval = -EFAULT;
else
retval = bytes_read;
} else {
Egis_Reset_device(dev);
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=READ= fail %d\r\n", retval);
}
//*/
exit:
/* ----- Auto suspend ----- */
usb_autopm_put_interface(dev->interface);
mutex_unlock(&dev->io_mutex);
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "READ bytes %d\r\n", retval);
printk(KERN_INFO "Patrick-> ss801u_read finish\n");
return retval;
}
static int ss801u_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
usb_ss801u *dev;
int argerr = 0;
int retval = 0;
u32 tmp;
unsigned n_ioc = 0;
struct spi_ioc_transfer *ioc = NULL;
printk(KERN_INFO "Patrick-> ss801u_ioctl start\n");
dev = (usb_ss801u *)file->private_data;
pr_debug("ioctl Start!!\n");
/* ================================ Check input cmd and arg ======================================== */
/* ================================================================================================= */
/* ---- Check control code ---- */
if (EGIS_IOCTL_MAXNR <= _IOC_NR(cmd))
return -ENOTTY;
/* ================================== Switch control code ========================================== */
/* ================================================================================================= */
mutex_lock(&dev->io_mutex);
if (!dev->interface) { /* disconnect() was called */
retval = -ENODEV;
goto exit;
}
/* ----- Avoid suspend ----- */
usb_autopm_get_interface(dev->interface);
/* ---- Check argument buffer ---- */
if (_IOC_READ & _IOC_DIR(cmd)) {
/* access_ok : 1 means success */
/* VERIFY_WRITE : A buffer that SDK reads means drivers should write it. */
argerr = !access_ok(VERIFY_WRITE, (void __user *)arg, _IOC_SIZE(cmd));
}
if (_IOC_WRITE & _IOC_DIR(cmd))
argerr = !access_ok(VERIFY_READ, (void __user *)arg, _IOC_SIZE(cmd));
if (argerr)
return -EINVAL;
if (SPI_IOC_MAGIC == _IOC_TYPE(cmd)) {
tmp = _IOC_SIZE(cmd);
if ((tmp % sizeof(struct spi_ioc_transfer)) != 0) {
retval = -EINVAL;
goto done;
}
n_ioc = tmp / sizeof(struct spi_ioc_transfer);
pr_debug("%s->%s: Got %d spi_ioc_transfer Packages\n", __FILE__, __func__, n_ioc);
if (n_ioc == 0)
goto done;
/* copy into scratch area */
ioc = kmalloc(tmp, GFP_KERNEL);
if (!ioc) {
retval = -ENOMEM;
goto done;
}
if (__copy_from_user(ioc, (void __user *)arg, tmp)) {
kfree(ioc);
retval = -EFAULT;
goto done;
}
switch (ioc->opcode) {
case JADE_REGISTER_MASSREAD:
printk(KERN_INFO "Patrick-> JADE_REGISTER_MASSREAD start\n");
if (ioc->rx_buf) {
if (!access_ok(VERIFY_WRITE, (u8 __user *) (uintptr_t) ioc->rx_buf, ioc->len)) {
pr_debug("!access_ok on JADE_REGISTER_MASSREAD!!");
retval = -EACCES;
goto done;
}
}
retval = ES603_IO_Bulk_Read(dev, ioc, n_ioc);
printk(KERN_INFO "Patrick-> JADE_REGISTER_MASSREAD finish\n");
break;
case JADE_REGISTER_MASSWRITE:
printk(KERN_INFO "Patrick-> JADE_REGISTER_MASSWRITE start\n");
retval = ES603_IO_Bulk_Write(dev, ioc, n_ioc);
printk(KERN_INFO "Patrick-> JADE_REGISTER_MASSWRITE finish\n");
break;
case JADE_GET_ONE_IMG:
printk(KERN_INFO "Patrick-> JADE_GET_ONE_IMG start\n");
retval = es603_io_bulk_get_image(dev, ioc, n_ioc);
printk(KERN_INFO "Patrick-> JADE_GET_ONE_IMG finish\n");
break;
case JADE_GET_FULL_IMAGE2:
printk(KERN_INFO "Patrick-> JADE_GET_FULL_IMAGE2 start\n");
retval = es603_io_bulk_get_full_image(dev, ioc, n_ioc);
printk(KERN_INFO "Patrick-> JADE_GET_FULL_IMAGE2 finish\n");
break;
default:
retval = -EFAULT;
}
done:
kfree(ioc);
} else if (EGIS_IOCTL_MAGIC == _IOC_TYPE(cmd)) {
switch (cmd) {
/* -------------------- ss801u SCSI CMD XFER ---------------------- */
/* ---------------------------------------------------------------- */
case EGIS_IOCTL_SCSI_READ:
{
retval = Egis_IO_SCSI_Read(dev, arg);
break;
}
case EGIS_IOCTL_SCSI_WRITE:
{
retval = Egis_IO_SCSI_Write(dev, arg);
break;
}
case EGIS_IOCTL_SET_NORMALMODE_REG:
{
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=ioctl=EGIS_IOCTL_SET_NORMALMODE_REG ");
if (copy_from_user((void *)&dev->normalCBW, (void *)arg, CBW_SIZE)) {
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=ioctl=EGIS_IOCTL_SET_NORMALMODE_REG copy from user fail\r\n");
retval = -EFAULT; break;
}
break;
}
case EGIS_IOCTL_SET_CONTACTMODE_REG:
{
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=ioctl=EGIS_IOCTL_SET_CONTACTMODE_REG ");
if (copy_from_user(&dev->contactCBW, (void *)arg, CBW_SIZE)) {
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=ioctl=EGIS_IOCTL_SET_CONTACTMODE_REG copy from user fail\r\n");
retval = -EFAULT; break;
}
break;
}
/* -------------------- JADE USB BASIC XFER ----------------------- */
/* ---------------------------------------------------------------- */
case EGIS_IOCTL_BULK_READ:
{
retval = Egis_IO_Bulk_Read(dev, arg);
break;
}
case EGIS_IOCTL_BULK_WRITE:
{
retval = Egis_IO_Bulk_Write(dev, arg);
break;
}
case EGIS_IOCTL_CTRLXFER_READ:
{
retval = Egis_IO_CtrlXfer(dev, arg, Ctrl_IN);
break;
}
case EGIS_IOCTL_CTRLXFER_WRITE:
{
retval = Egis_IO_CtrlXfer(dev, arg, Ctrl_OUT);
break;
}
/*---------------------- Helper function ------------------------- */
/*---------------------------------------------------------------- */
case EGIS_IOCTL_ENTER_SUSPEND:
dev->udev->autosuspend_delay = 0;
break;
case EGIS_IOCTL_RESET_DEVICE:
retval = Egis_IO_Reset_Device(dev);
break;
case EGIS_IOCTL_CREATE_SIGNAL:
dev->sig_type = arg;
break;
/* -------------------- Alternative Setting ----------------------- */
/* ---------------------------------------------------------------- */
case EGIS_IOCTL_SET_AUTOSUSPEND_TIME:
dev->idle_delay_time = arg;
dev->udev->autosuspend_delay = dev->idle_delay_time*HZ;
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=ioctl= idle-delay time %d \r\n", dev->idle_delay_time);
break;
/* ------------------------- Information -------------------------- */
/* ---------------------------------------------------------------- */
case EGIS_IOCTL_GET_VERSION:
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=ioctl= EGIS_IOCTL_GET_VERSION %s\r\n", dev->version.vstring);
if (copy_to_user((void *)arg, &dev->version, sizeof(FPDriver_Version))) {
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=ioctl= EGIS_IOCTL_GET_VERSION copy to user fail\r\n");
retval = -EFAULT; break;
}
break;
/* ------------------------ Debug usage --------------------------- */
/* ---------------------------------------------------------------- */
case EGIS_IOCTL_ENABLE_DBG_MSG:
dev->bPrintDbgMsg = arg;
break;
/* ------------------------ FOR TEST ------------------------------ */
/* ---------------------------------------------------------------- */
case EGIS_IOCTL_TS_SIGNAL:
if (dev->async_resume) {
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=ioctl= kill_fasync resume!!\r\n");
kill_fasync(&dev->async_resume, SIGIO, POLL_IN);
}
if (dev->async_suspend) {
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=ioctl= kill_fasync suspend !!\r\n");
kill_fasync(&dev->async_suspend, SIGIO, POLL_IN);
}
break;
case EGIS_IOCTL_TS_SWITCH_AUTOSUSPEND:
arg ? usb_enable_autosuspend(dev->udev):usb_disable_autosuspend(dev->udev);
break;
case EGIS_IOCTL_TS_SWITCH_RMWAKEUP:
dev->udev->do_remote_wakeup = arg;
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=ioctl= do_remote_wakeup %d \r\n",
dev->udev->do_remote_wakeup);
break;
default :
retval = -ENOTTY;
break;
}
} else {
retval = -ENOTTY;
}
exit:
/* ----- Auto suspend ----- */
usb_autopm_put_interface(dev->interface);
mutex_unlock(&dev->io_mutex);
printk(KERN_INFO "Patrick-> ss801u_ioctl finish\n");
return retval;
}
int Egis_BulkXfer(
usb_ss801u *dev,
trans_dir dir,
void* Data,
int DataSize,
int* pActualSize,
int Timeout
)
{
int retval = -1;
int iActualRWSize;
bool bRestore=false;
//Wayne for test
// dev->bPrintDbgMsg = true;
// pr_debug("%s:%d bulk In endpoint = %d Out endpoint = %d\n", __FUNCTION__, __LINE__, dev->bulk_in_endpointAddr, dev->bulk_out_endpointAddr);
if (!dev->udev)
{
pr_debug("dev->udev = NULL\n");
}
else
{
pr_debug("dev->udev->state = %d dev->udev->speed = %d\n", dev->udev->state, dev->udev->speed);
}
// for (i = 0; i < DataSize; i++)
// {
// pr_debug("%2x ", (u8)Data[i]);
// }
// pr_debug("\n");
mutex_lock(&dev->Bulk_Mutex);
//----- if EPROTO happens, we will call clear feature and re-send again
do{
EgisMsg(dev->bPrintDbgMsg, KERN_ERR,"Do usb_bulk_msg\n");
retval = usb_bulk_msg(
dev->udev,
(dir_in == dir) ?
usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr) :
usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr),
Data,
DataSize,
&iActualRWSize,
Timeout
);
// show data
// EgisMsg(dev->bPrintDbgMsg, KERN_ERR,"following are data block of bulk transfer:\r\n");
// int iLoopIndex = 0;
// unsigned char *pData = Data;
// for(iLoopIndex = 0; iLoopIndex<DataSize; iLoopIndex++)
// {
// EgisMsg(dev->bPrintDbgMsg, KERN_ERR,"%2x", pData[iLoopIndex]);
// }
// EgisMsg(dev->bPrintDbgMsg, KERN_ERR,"\r\ndata block finish\r\n");
if(EGIS_FAIL(retval)){
//----- if error == EPROTO && not be restored --> clear halt
if(EOVERFLOW == retval)
{
EgisMsg(dev->bPrintDbgMsg, KERN_ERR,"=Egis_BulkXfer= bulk transfer error, EOVERFLOW, data size = %d"
, DataSize);
}
if(EPROTO == retval && !bRestore){
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=Egis_BulkXfer= bulk xfer fail clear feature\r\n");
retval = usb_clear_halt(dev->udev, (dir_in == dir) ?
usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr) :
usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr)
);
bRestore = true;
}
//----- this if include "else" above and check clear halt fail
if(EGIS_FAIL(retval)){
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=Egis_BulkXfer= bulk xfer fail %d\r\n", retval);
break;
}
}
else{
//----- if xfer is success, set bRestore=false to leave while loop
bRestore = false;
}
}while(EGIS_SUCCESS(retval) && bRestore);
memcpy(pActualSize, &iActualRWSize, sizeof(int));
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=Egis_BulkXfer= bulk xfer actual data size: %d\r\n", iActualRWSize);
mutex_unlock(&dev->Bulk_Mutex);
//----- If xfer fails, reset device.
if(EGIS_FAIL(retval)){
Egis_Reset_device(dev);
}
//Wayne for test
dev->bPrintDbgMsg = false;
return retval;
}
int Egis_SndSCSICmd(usb_ss801u *dev, // device infomation
PCBW_Form CBW, // CBW
char* data, size_t datasize, trans_dir dir, // data infomation
unsigned char* CSW, // CSW
unsigned long timeout
)
{
int retval=0;
int bytes_read;
unsigned char tmpCSW[CSW_SIZE];
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=Egis_sndSCSIcmd= Start\r\n");
mutex_lock(&dev->SCSI_mutex);
//================================== CBW =========================================//
//================================================================================//
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=Egis_sndSCSIcmd= send CBW using bulk transfer\r\n");
retval = Egis_BulkXfer(
dev,
dir_out,
CBW,
CBW_SIZE,
&bytes_read,
timeout
);
if(EGIS_FAIL(retval)){
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=Egis_sndSCSIcmd= snd CBW fail %d\r\n", retval);
goto SCSI_EXIT;
}
//================================== DATA ========================================//
//================================================================================//
EgisMsg(dev->bPrintDbgMsg, KERN_INFO,
"=Egis_sndSCSIcmd= send or get data block using bulk transfer, data size is:%u\r\n", datasize);
if(0 < datasize){
retval = Egis_BulkXfer(
dev,
dir,
data,
datasize,
&bytes_read,
timeout
);
/*EgisMsg(dev->bPrintDbgMsg, KERN_ERR,"following are data block:\r\n");
int iLoopIndex = 0;
for(iLoopIndex = 0; iLoopIndex<datasize; iLoopIndex++)
{
EgisMsg(dev->bPrintDbgMsg, KERN_ERR,"%d", data[iLoopIndex]);
}
EgisMsg(dev->bPrintDbgMsg, KERN_ERR,"\r\ndata block finish\r\n");*/
if(EGIS_FAIL(retval)){
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=Egis_sndSCSIcmd= data xfer fail %d\r\n", retval);
goto SCSI_EXIT;
}
}
else
{
EgisMsg(dev->bPrintDbgMsg, KERN_ERR,"=Egis_sndSCSIcmd= data size <= 0\r\n");
}
//================================== CSW =========================================//
//================================================================================//
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=Egis_sndSCSIcmd= read CSW using bulk transfer\r\n");
retval = Egis_BulkXfer(
dev,
dir_in,
tmpCSW,
CSW_SIZE,
&bytes_read,
timeout
);
if(EGIS_FAIL(retval)){
EgisMsg(dev->bPrintDbgMsg, KERN_ERR, "=Egis_sndSCSIcmd= rcv CSW fail %d\r\n", retval);
goto SCSI_EXIT;
}
else{
if(CSW){
memcpy(CSW, tmpCSW, CSW_SIZE);
}
}
SCSI_EXIT:
mutex_unlock(&dev->SCSI_mutex);
EgisMsg(dev->bPrintDbgMsg, KERN_INFO, "=Egis_sndSCSIcmd= END\r\n");
return retval;
}
