void
RtspMediaCodecReader::HandleResourceAllocated()
{
EnsureActive();
MediaCodecReader::HandleResourceAllocated();
mRtspResource->EnablePlayoutDelay();;
}
void
RtspMediaCodecReader::RequestVideoData(bool aSkipToNextKeyframe,
int64_t aTimeThreshold)
{
EnsureActive();
MediaCodecReader::RequestVideoData(aSkipToNextKeyframe, aTimeThreshold);
}
nsRefPtr<MediaDecoderReader::VideoDataPromise>
RtspMediaCodecReader::RequestVideoData(bool aSkipToNextKeyframe,
int64_t aTimeThreshold)
{
EnsureActive();
return MediaCodecReader::RequestVideoData(aSkipToNextKeyframe, aTimeThreshold);
}
bool MediaOmxReader::DecodeAudioData()
{
MOZ_ASSERT(OnTaskQueue());
EnsureActive();
MOZ_ASSERT(mStreamSource);
// This is the approximate byte position in the stream.
int64_t pos = mStreamSource->Tell();
// Read next frame
MPAPI::AudioFrame source;
if (!mOmxDecoder->ReadAudio(&source, mAudioSeekTimeUs)) {
return false;
}
mAudioSeekTimeUs = -1;
// Ignore empty buffer which stagefright media read will sporadically return
if (source.mSize == 0) {
return true;
}
uint32_t frames = source.mSize / (source.mAudioChannels *
sizeof(AudioDataValue));
typedef AudioCompactor::NativeCopy OmxCopy;
return mAudioCompactor.Push(pos,
source.mTimeUs,
source.mAudioSampleRate,
frames,
source.mAudioChannels,
OmxCopy(static_cast<uint8_t *>(source.mData),
source.mSize,
source.mAudioChannels));
}
nsRefPtr<MediaDecoderReader::SeekPromise>
MediaOmxReader::Seek(int64_t aTarget, int64_t aEndTime)
{
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
EnsureActive();
VideoFrameContainer* container = mDecoder->GetVideoFrameContainer();
if (container && container->GetImageContainer()) {
container->GetImageContainer()->ClearAllImagesExceptFront();
}
if (mHasAudio && mHasVideo) {
// The OMXDecoder seeks/demuxes audio and video streams separately. So if
// we seek both audio and video to aTarget, the audio stream can typically
// seek closer to the seek target, since typically every audio block is
// a sync point, whereas for video there are only keyframes once every few
// seconds. So if we have both audio and video, we must seek the video
// stream to the preceeding keyframe first, get the stream time, and then
// seek the audio stream to match the video stream's time. Otherwise, the
// audio and video streams won't be in sync after the seek.
mVideoSeekTimeUs = aTarget;
const VideoData* v = DecodeToFirstVideoData();
mAudioSeekTimeUs = v ? v->mTime : aTarget;
} else {
mAudioSeekTimeUs = mVideoSeekTimeUs = aTarget;
}
return SeekPromise::CreateAndResolve(mAudioSeekTimeUs, __func__);
}
nsRefPtr<MediaDecoderReader::SeekPromise>
MediaOmxReader::Seek(int64_t aTarget, int64_t aEndTime)
{
MOZ_ASSERT(OnTaskQueue());
EnsureActive();
nsRefPtr<SeekPromise> p = mSeekPromise.Ensure(__func__);
if (mHasAudio && mHasVideo) {
// The OMXDecoder seeks/demuxes audio and video streams separately. So if
// we seek both audio and video to aTarget, the audio stream can typically
// seek closer to the seek target, since typically every audio block is
// a sync point, whereas for video there are only keyframes once every few
// seconds. So if we have both audio and video, we must seek the video
// stream to the preceeding keyframe first, get the stream time, and then
// seek the audio stream to match the video stream's time. Otherwise, the
// audio and video streams won't be in sync after the seek.
mVideoSeekTimeUs = aTarget;
nsRefPtr<MediaOmxReader> self = this;
mSeekRequest.Begin(DecodeToFirstVideoData()->Then(OwnerThread(), __func__, [self] (VideoData* v) {
self->mSeekRequest.Complete();
self->mAudioSeekTimeUs = v->mTime;
self->mSeekPromise.Resolve(self->mAudioSeekTimeUs, __func__);
}, [self, aTarget] () {
self->mSeekRequest.Complete();
self->mAudioSeekTimeUs = aTarget;
self->mSeekPromise.Resolve(aTarget, __func__);
}));
} else {
mAudioSeekTimeUs = mVideoSeekTimeUs = aTarget;
mSeekPromise.Resolve(aTarget, __func__);
}
return p;
}
void
PathBuilderD2D::LineTo(const Point &aPoint)
{
EnsureActive(aPoint);
mSink->AddLine(D2DPoint(aPoint));
mCurrentPoint = aPoint;
}
void
PathBuilderD2D::Arc(const Point &aOrigin, Float aRadius, Float aStartAngle,
Float aEndAngle, bool aAntiClockwise)
{
if (aAntiClockwise && aStartAngle < aEndAngle) {
// D2D does things a little differently, and draws the arc by specifying an
// beginning and an end point. This means the circle will be the wrong way
// around if the start angle is smaller than the end angle. It might seem
// tempting to invert aAntiClockwise but that would change the sweeping
// direction of the arc to instead we exchange start/begin.
Float oldStart = aStartAngle;
aStartAngle = aEndAngle;
aEndAngle = oldStart;
}
// XXX - Workaround for now, D2D does not appear to do the desired thing when
// the angle sweeps a complete circle.
if (aEndAngle - aStartAngle >= 2 * M_PI) {
aEndAngle = Float(aStartAngle + M_PI * 1.9999);
} else if (aStartAngle - aEndAngle >= 2 * M_PI) {
aStartAngle = Float(aEndAngle + M_PI * 1.9999);
}
Point startPoint;
startPoint.x = aOrigin.x + aRadius * cos(aStartAngle);
startPoint.y = aOrigin.y + aRadius * sin(aStartAngle);
if (!mFigureActive) {
EnsureActive(startPoint);
} else {
mSink->AddLine(D2DPoint(startPoint));
}
Point endPoint;
endPoint.x = aOrigin.x + aRadius * cos(aEndAngle);
endPoint.y = aOrigin.y + aRadius * sin(aEndAngle);
D2D1_ARC_SIZE arcSize = D2D1_ARC_SIZE_SMALL;
if (aAntiClockwise) {
if (aStartAngle - aEndAngle > M_PI) {
arcSize = D2D1_ARC_SIZE_LARGE;
}
} else {
if (aEndAngle - aStartAngle > M_PI) {
arcSize = D2D1_ARC_SIZE_LARGE;
}
}
mSink->AddArc(D2D1::ArcSegment(D2DPoint(endPoint),
D2D1::SizeF(aRadius, aRadius),
0.0f,
aAntiClockwise ? D2D1_SWEEP_DIRECTION_COUNTER_CLOCKWISE :
D2D1_SWEEP_DIRECTION_CLOCKWISE,
arcSize));
mCurrentPoint = endPoint;
}
void
PathBuilderD2D::QuadraticBezierTo(const Point &aCP1,
const Point &aCP2)
{
EnsureActive(aCP1);
mSink->AddQuadraticBezier(D2D1::QuadraticBezierSegment(D2DPoint(aCP1),
D2DPoint(aCP2)));
mCurrentPoint = aCP2;
}
void
PathBuilderD2D::MoveTo(const Point &aPoint)
{
if (mFigureActive) {
mSink->EndFigure(D2D1_FIGURE_END_OPEN);
mFigureActive = false;
}
EnsureActive(aPoint);
mCurrentPoint = aPoint;
}
void
PathBuilderD2D::Close()
{
if (mFigureActive) {
mSink->EndFigure(D2D1_FIGURE_END_CLOSED);
mFigureActive = false;
EnsureActive(mBeginPoint);
}
}
void
PathBuilderD2D::BezierTo(const Point &aCP1,
const Point &aCP2,
const Point &aCP3)
{
EnsureActive(aCP1);
mSink->AddBezier(D2D1::BezierSegment(D2DPoint(aCP1),
D2DPoint(aCP2),
D2DPoint(aCP3)));
mCurrentPoint = aCP3;
}
nsRefPtr<MediaDecoderReader::MetadataPromise>
RtspMediaCodecReader::AsyncReadMetadata()
{
mRtspResource->DisablePlayoutDelay();
EnsureActive();
nsRefPtr<MediaDecoderReader::MetadataPromise> p =
MediaCodecReader::AsyncReadMetadata();
// Send a PAUSE to the RTSP server because the underlying media resource is
// not ready.
SetIdle();
return p;
}
nsresult
RtspMediaCodecReader::ReadMetadata(MediaInfo* aInfo,
MetadataTags** aTags)
{
mRtspResource->DisablePlayoutDelay();
EnsureActive();
nsresult rv = MediaCodecReader::ReadMetadata(aInfo, aTags);
SetIdle();
if (rv == NS_OK && !IsWaitingMediaResources()) {
mRtspResource->EnablePlayoutDelay();
}
return rv;
}
void MessageQueue::Post(MessageHandler *phandler, uint32 id,
MessageData *pdata, bool time_sensitive) {
if (fStop_)
return;
// Keep thread safe
// Add the message to the end of the queue
// Signal for the multiplexer to return
CritScope cs(&crit_);
EnsureActive();
Message msg;
msg.phandler = phandler;
msg.message_id = id;
msg.pdata = pdata;
if (time_sensitive) {
msg.ts_sensitive = Time() + kMaxMsgLatency;
}
msgq_.push_back(msg);
ss_->WakeUp();
}
void MessageQueue::DoDelayPost(int cmsDelay, uint32 tstamp,
MessageHandler *phandler, uint32 id, MessageData* pdata) {
if (fStop_)
return;
// Keep thread safe
// Add to the priority queue. Gets sorted soonest first.
// Signal for the multiplexer to return.
CritScope cs(&crit_);
EnsureActive();
Message msg;
msg.phandler = phandler;
msg.message_id = id;
msg.pdata = pdata;
DelayedMessage dmsg(cmsDelay, tstamp, dmsgq_next_num_, msg);
dmsgq_.push(dmsg);
// If this message queue processes 1 message every millisecond for 50 days,
// we will wrap this number. Even then, only messages with identical times
// will be misordered, and then only briefly. This is probably ok.
VERIFY(0 != ++dmsgq_next_num_);
ss_->WakeUp();
}
nsRefPtr<MediaDecoderReader::MetadataPromise>
MediaOmxReader::AsyncReadMetadata()
{
MOZ_ASSERT(OnTaskQueue());
EnsureActive();
// Initialize the internal OMX Decoder.
nsresult rv = InitOmxDecoder();
if (NS_FAILED(rv)) {
return MediaDecoderReader::MetadataPromise::CreateAndReject(
ReadMetadataFailureReason::METADATA_ERROR, __func__);
}
bool isMP3 = mDecoder->GetResource()->GetContentType().EqualsASCII(AUDIO_MP3);
if (isMP3) {
// When read sdcard's file on b2g platform at constructor,
// the mDecoder->GetResource()->GetLength() would return -1.
// Delay set the total duration on this function.
mMP3FrameParser.SetLength(mDecoder->GetResource()->GetLength());
ProcessCachedData(0);
}
nsRefPtr<MediaDecoderReader::MetadataPromise> p = mMetadataPromise.Ensure(__func__);
nsRefPtr<MediaOmxReader> self = this;
mMediaResourceRequest.Begin(mOmxDecoder->AllocateMediaResources()
->Then(OwnerThread(), __func__,
[self] (bool) -> void {
self->mMediaResourceRequest.Complete();
self->HandleResourceAllocated();
}, [self] (bool) -> void {
self->mMediaResourceRequest.Complete();
self->mMetadataPromise.Reject(ReadMetadataFailureReason::METADATA_ERROR, __func__);
}));
return p;
}
bool MediaOmxReader::DecodeVideoFrame(bool &aKeyframeSkip,
int64_t aTimeThreshold)
{
MOZ_ASSERT(OnTaskQueue());
EnsureActive();
// Record number of frames decoded and parsed. Automatically update the
// stats counters using the AutoNotifyDecoded stack-based class.
AbstractMediaDecoder::AutoNotifyDecoded a(mDecoder);
bool doSeek = mVideoSeekTimeUs != -1;
if (doSeek) {
aTimeThreshold = mVideoSeekTimeUs;
}
TimeStamp start = TimeStamp::Now();
// Read next frame. Don't let this loop run for too long.
while ((TimeStamp::Now() - start) < TimeDuration::FromSeconds(MAX_VIDEO_DECODE_SECONDS)) {
MPAPI::VideoFrame frame;
frame.mGraphicBuffer = nullptr;
frame.mShouldSkip = false;
if (!mOmxDecoder->ReadVideo(&frame, aTimeThreshold, aKeyframeSkip, doSeek)) {
return false;
}
doSeek = false;
mVideoSeekTimeUs = -1;
// Ignore empty buffer which stagefright media read will sporadically return
if (frame.mSize == 0 && !frame.mGraphicBuffer) {
continue;
}
a.mParsed++;
if (frame.mShouldSkip && mSkipCount < MAX_DROPPED_FRAMES) {
mSkipCount++;
continue;
}
mSkipCount = 0;
aKeyframeSkip = false;
IntRect picture = mPicture;
if (frame.Y.mWidth != mInitialFrame.width ||
frame.Y.mHeight != mInitialFrame.height) {
// Frame size is different from what the container reports. This is legal,
// and we will preserve the ratio of the crop rectangle as it
// was reported relative to the picture size reported by the container.
picture.x = (mPicture.x * frame.Y.mWidth) / mInitialFrame.width;
picture.y = (mPicture.y * frame.Y.mHeight) / mInitialFrame.height;
picture.width = (frame.Y.mWidth * mPicture.width) / mInitialFrame.width;
picture.height = (frame.Y.mHeight * mPicture.height) / mInitialFrame.height;
}
MOZ_ASSERT(mStreamSource);
// This is the approximate byte position in the stream.
int64_t pos = mStreamSource->Tell();
nsRefPtr<VideoData> v;
if (!frame.mGraphicBuffer) {
VideoData::YCbCrBuffer b;
b.mPlanes[0].mData = static_cast<uint8_t *>(frame.Y.mData);
b.mPlanes[0].mStride = frame.Y.mStride;
b.mPlanes[0].mHeight = frame.Y.mHeight;
b.mPlanes[0].mWidth = frame.Y.mWidth;
b.mPlanes[0].mOffset = frame.Y.mOffset;
b.mPlanes[0].mSkip = frame.Y.mSkip;
b.mPlanes[1].mData = static_cast<uint8_t *>(frame.Cb.mData);
b.mPlanes[1].mStride = frame.Cb.mStride;
b.mPlanes[1].mHeight = frame.Cb.mHeight;
b.mPlanes[1].mWidth = frame.Cb.mWidth;
b.mPlanes[1].mOffset = frame.Cb.mOffset;
b.mPlanes[1].mSkip = frame.Cb.mSkip;
b.mPlanes[2].mData = static_cast<uint8_t *>(frame.Cr.mData);
b.mPlanes[2].mStride = frame.Cr.mStride;
b.mPlanes[2].mHeight = frame.Cr.mHeight;
b.mPlanes[2].mWidth = frame.Cr.mWidth;
b.mPlanes[2].mOffset = frame.Cr.mOffset;
b.mPlanes[2].mSkip = frame.Cr.mSkip;
v = VideoData::Create(mInfo.mVideo,
mDecoder->GetImageContainer(),
pos,
frame.mTimeUs,
1, // We don't know the duration.
b,
frame.mKeyFrame,
-1,
picture);
} else {
v = VideoData::Create(mInfo.mVideo,
mDecoder->GetImageContainer(),
pos,
frame.mTimeUs,
1, // We don't know the duration.
frame.mGraphicBuffer,
frame.mKeyFrame,
-1,
picture);
}
if (!v) {
NS_WARNING("Unable to create VideoData");
return false;
}
a.mDecoded++;
NS_ASSERTION(a.mDecoded <= a.mParsed, "Expect to decode fewer frames than parsed in OMX decoder...");
mVideoQueue.Push(v);
break;
}
return true;
}
void MediaOmxReader::HandleResourceAllocated()
{
EnsureActive();
// After resources are available, set the metadata.
if (!mOmxDecoder->EnsureMetadata()) {
mMetadataPromise.Reject(ReadMetadataFailureReason::METADATA_ERROR, __func__);
return;
}
bool isMP3 = mDecoder->GetResource()->GetContentType().EqualsASCII(AUDIO_MP3);
if (isMP3 && mMP3FrameParser.IsMP3()) {
// Check if the MP3 frame parser found a duration.
mLastParserDuration = mMP3FrameParser.GetDuration();
}
if (mLastParserDuration >= 0) {
// Prefer the parser duration if we have it.
mInfo.mMetadataDuration = Some(TimeUnit::FromMicroseconds(mLastParserDuration));
} else {
// MP3 parser failed to find a duration.
// Set the total duration (the max of the audio and video track).
int64_t durationUs;
mOmxDecoder->GetDuration(&durationUs);
if (durationUs) {
mInfo.mMetadataDuration = Some(TimeUnit::FromMicroseconds(durationUs));
}
}
if (mOmxDecoder->HasVideo()) {
int32_t displayWidth, displayHeight, width, height;
mOmxDecoder->GetVideoParameters(&displayWidth, &displayHeight,
&width, &height);
nsIntRect pictureRect(0, 0, width, height);
// Validate the container-reported frame and pictureRect sizes. This ensures
// that our video frame creation code doesn't overflow.
nsIntSize displaySize(displayWidth, displayHeight);
nsIntSize frameSize(width, height);
if (!IsValidVideoRegion(frameSize, pictureRect, displaySize)) {
mMetadataPromise.Reject(ReadMetadataFailureReason::METADATA_ERROR, __func__);
return;
}
// Video track's frame sizes will not overflow. Activate the video track.
mHasVideo = true;
mInfo.mVideo.mDisplay = displaySize;
mPicture = pictureRect;
mInitialFrame = frameSize;
VideoFrameContainer* container = mDecoder->GetVideoFrameContainer();
if (container) {
container->ClearCurrentFrame(gfxIntSize(displaySize.width, displaySize.height));
}
}
if (mOmxDecoder->HasAudio()) {
int32_t numChannels, sampleRate;
mOmxDecoder->GetAudioParameters(&numChannels, &sampleRate);
mHasAudio = true;
mInfo.mAudio.mChannels = numChannels;
mInfo.mAudio.mRate = sampleRate;
}
nsRefPtr<MetadataHolder> metadata = new MetadataHolder();
metadata->mInfo = mInfo;
metadata->mTags = nullptr;
#ifdef MOZ_AUDIO_OFFLOAD
CheckAudioOffload();
#endif
mMetadataPromise.Resolve(metadata, __func__);
}
void
RtspMediaCodecReader::RequestAudioData()
{
EnsureActive();
MediaCodecReader::RequestAudioData();
}
nsRefPtr<MediaDecoderReader::AudioDataPromise>
RtspMediaCodecReader::RequestAudioData()
{
EnsureActive();
return MediaCodecReader::RequestAudioData();
}
void
PathBuilderD2D::Arc(const Point &aOrigin, Float aRadius, Float aStartAngle,
Float aEndAngle, bool aAntiClockwise)
{
if (aAntiClockwise && aStartAngle < aEndAngle) {
// D2D does things a little differently, and draws the arc by specifying an
// beginning and an end point. This means the circle will be the wrong way
// around if the start angle is smaller than the end angle. It might seem
// tempting to invert aAntiClockwise but that would change the sweeping
// direction of the arc so instead we exchange start/begin.
Float oldStart = aStartAngle;
aStartAngle = aEndAngle;
aEndAngle = oldStart;
}
// XXX - Workaround for now, D2D does not appear to do the desired thing when
// the angle sweeps a complete circle.
bool fullCircle = false;
if (aEndAngle - aStartAngle >= 2 * M_PI) {
fullCircle = true;
aEndAngle = Float(aStartAngle + M_PI * 1.9999);
} else if (aStartAngle - aEndAngle >= 2 * M_PI) {
fullCircle = true;
aStartAngle = Float(aEndAngle + M_PI * 1.9999);
}
Point startPoint;
startPoint.x = aOrigin.x + aRadius * cos(aStartAngle);
startPoint.y = aOrigin.y + aRadius * sin(aStartAngle);
if (!mFigureActive) {
EnsureActive(startPoint);
} else {
mSink->AddLine(D2DPoint(startPoint));
}
Point endPoint;
endPoint.x = aOrigin.x + aRadius * cosf(aEndAngle);
endPoint.y = aOrigin.y + aRadius * sinf(aEndAngle);
D2D1_ARC_SIZE arcSize = D2D1_ARC_SIZE_SMALL;
D2D1_SWEEP_DIRECTION direction =
aAntiClockwise ? D2D1_SWEEP_DIRECTION_COUNTER_CLOCKWISE :
D2D1_SWEEP_DIRECTION_CLOCKWISE;
// if startPoint and endPoint of our circle are too close there are D2D issues
// with drawing the circle as a single arc
const Float kEpsilon = 1e-5f;
if (!fullCircle ||
(std::abs(startPoint.x - endPoint.x) +
std::abs(startPoint.y - endPoint.y) > kEpsilon)) {
if (aAntiClockwise) {
if (aStartAngle - aEndAngle > M_PI) {
arcSize = D2D1_ARC_SIZE_LARGE;
}
} else {
if (aEndAngle - aStartAngle > M_PI) {
arcSize = D2D1_ARC_SIZE_LARGE;
}
}
mSink->AddArc(D2D1::ArcSegment(D2DPoint(endPoint),
D2D1::SizeF(aRadius, aRadius),
0.0f,
direction,
arcSize));
}
else {
// our first workaround attempt didn't work, so instead draw the circle as
// two half-circles
Float midAngle = aEndAngle > aStartAngle ?
Float(aStartAngle + M_PI) : Float(aEndAngle + M_PI);
Point midPoint;
midPoint.x = aOrigin.x + aRadius * cosf(midAngle);
midPoint.y = aOrigin.y + aRadius * sinf(midAngle);
mSink->AddArc(D2D1::ArcSegment(D2DPoint(midPoint),
D2D1::SizeF(aRadius, aRadius),
0.0f,
direction,
arcSize));
// if the adjusted endPoint computed above is used here and endPoint !=
// startPoint then this half of the circle won't render...
mSink->AddArc(D2D1::ArcSegment(D2DPoint(startPoint),
D2D1::SizeF(aRadius, aRadius),
0.0f,
direction,
arcSize));
}
mCurrentPoint = endPoint;
}
nsresult MediaOmxReader::ReadMetadata(MediaInfo* aInfo,
MetadataTags** aTags)
{
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
EnsureActive();
*aTags = nullptr;
// Initialize the internal OMX Decoder.
nsresult rv = InitOmxDecoder();
if (NS_FAILED(rv)) {
return rv;
}
if (!mOmxDecoder->TryLoad()) {
return NS_ERROR_FAILURE;
}
#ifdef MOZ_AUDIO_OFFLOAD
CheckAudioOffload();
#endif
if (IsWaitingMediaResources()) {
return NS_OK;
}
// Set the total duration (the max of the audio and video track).
int64_t durationUs;
mOmxDecoder->GetDuration(&durationUs);
if (durationUs) {
ReentrantMonitorAutoEnter mon(mDecoder->GetReentrantMonitor());
mDecoder->SetMediaDuration(durationUs);
}
if (mOmxDecoder->HasVideo()) {
int32_t displayWidth, displayHeight, width, height;
mOmxDecoder->GetVideoParameters(&displayWidth, &displayHeight,
&width, &height);
nsIntRect pictureRect(0, 0, width, height);
// Validate the container-reported frame and pictureRect sizes. This ensures
// that our video frame creation code doesn't overflow.
nsIntSize displaySize(displayWidth, displayHeight);
nsIntSize frameSize(width, height);
if (!IsValidVideoRegion(frameSize, pictureRect, displaySize)) {
return NS_ERROR_FAILURE;
}
// Video track's frame sizes will not overflow. Activate the video track.
mHasVideo = mInfo.mVideo.mHasVideo = true;
mInfo.mVideo.mDisplay = displaySize;
mPicture = pictureRect;
mInitialFrame = frameSize;
VideoFrameContainer* container = mDecoder->GetVideoFrameContainer();
if (container) {
container->SetCurrentFrame(gfxIntSize(displaySize.width, displaySize.height),
nullptr,
mozilla::TimeStamp::Now());
}
}
if (mOmxDecoder->HasAudio()) {
int32_t numChannels, sampleRate;
mOmxDecoder->GetAudioParameters(&numChannels, &sampleRate);
mHasAudio = mInfo.mAudio.mHasAudio = true;
mInfo.mAudio.mChannels = numChannels;
mInfo.mAudio.mRate = sampleRate;
}
*aInfo = mInfo;
return NS_OK;
}
nsresult MediaOmxReader::ReadMetadata(MediaInfo* aInfo,
MetadataTags** aTags)
{
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
EnsureActive();
*aTags = nullptr;
// Initialize the internal OMX Decoder.
nsresult rv = InitOmxDecoder();
if (NS_FAILED(rv)) {
return rv;
}
bool isMP3 = mDecoder->GetResource()->GetContentType().EqualsASCII(AUDIO_MP3);
if (isMP3) {
// When read sdcard's file on b2g platform at constructor,
// the mDecoder->GetResource()->GetLength() would return -1.
// Delay set the total duration on this function.
mMP3FrameParser.SetLength(mDecoder->GetResource()->GetLength());
ProcessCachedData(0, true);
}
if (!mOmxDecoder->AllocateMediaResources()) {
return NS_ERROR_FAILURE;
}
// Bug 1050667, both MediaDecoderStateMachine and MediaOmxReader
// relies on IsWaitingMediaResources() function. And the waiting state will be
// changed by binder thread, so we store the waiting state in a cache value to
// make them in consistent state.
UpdateIsWaitingMediaResources();
if (IsWaitingMediaResources()) {
return NS_OK;
}
// After resources are available, set the metadata.
if (!mOmxDecoder->EnsureMetadata()) {
return NS_ERROR_FAILURE;
}
if (isMP3 && mMP3FrameParser.IsMP3()) {
int64_t duration = mMP3FrameParser.GetDuration();
// The MP3FrameParser may reported a duration;
// return -1 if no frame has been parsed.
if (duration >= 0) {
ReentrantMonitorAutoEnter mon(mDecoder->GetReentrantMonitor());
mUseParserDuration = true;
mLastParserDuration = duration;
mDecoder->SetMediaDuration(mLastParserDuration);
}
} else {
// Set the total duration (the max of the audio and video track).
int64_t durationUs;
mOmxDecoder->GetDuration(&durationUs);
if (durationUs) {
ReentrantMonitorAutoEnter mon(mDecoder->GetReentrantMonitor());
mDecoder->SetMediaDuration(durationUs);
}
}
if (mOmxDecoder->HasVideo()) {
int32_t displayWidth, displayHeight, width, height;
mOmxDecoder->GetVideoParameters(&displayWidth, &displayHeight,
&width, &height);
nsIntRect pictureRect(0, 0, width, height);
// Validate the container-reported frame and pictureRect sizes. This ensures
// that our video frame creation code doesn't overflow.
nsIntSize displaySize(displayWidth, displayHeight);
nsIntSize frameSize(width, height);
if (!IsValidVideoRegion(frameSize, pictureRect, displaySize)) {
return NS_ERROR_FAILURE;
}
// Video track's frame sizes will not overflow. Activate the video track.
mHasVideo = mInfo.mVideo.mHasVideo = true;
mInfo.mVideo.mDisplay = displaySize;
mPicture = pictureRect;
mInitialFrame = frameSize;
VideoFrameContainer* container = mDecoder->GetVideoFrameContainer();
if (container) {
container->SetCurrentFrame(gfxIntSize(displaySize.width, displaySize.height),
nullptr,
mozilla::TimeStamp::Now());
}
}
if (mOmxDecoder->HasAudio()) {
int32_t numChannels, sampleRate;
mOmxDecoder->GetAudioParameters(&numChannels, &sampleRate);
mHasAudio = mInfo.mAudio.mHasAudio = true;
mInfo.mAudio.mChannels = numChannels;
mInfo.mAudio.mRate = sampleRate;
}
*aInfo = mInfo;
#ifdef MOZ_AUDIO_OFFLOAD
CheckAudioOffload();
#endif
return NS_OK;
}
