static void fa_printopt()
{
FA_PRINT("NOTE: configuration is below\n");
FA_PRINT("NOTE: inputfile = %s\n", opt_inputfile);
FA_PRINT("NOTE: outputfile= %s\n", opt_outputfile);
FA_PRINT("NOTE: framelen = %d\n", opt_framelen);
}
static void fa_printopt()
{
FA_PRINT("NOTE: configuration is below\n");
FA_PRINT("NOTE: inputfile = %s\n", opt_inputfile);
FA_PRINT("NOTE: video outputfile= %s\n", opt_video_outputfile);
FA_PRINT("NOTE: audio outputfile= %s\n", opt_audio_outputfile);
}
static void fa_printopt()
{
FA_PRINT("NOTE: configuration is below\n");
FA_PRINT("NOTE: inputfile = %s\n", opt_inputfile);
FA_PRINT("NOTE: outputfile= %s\n", opt_outputfile);
FA_PRINT("NOTE: bitrate = %d kbps\n", opt_bitrate);
FA_PRINT("NOTE: speed lev = %d\n", opt_speedlevel);
}
/**
* @brief: check the input value valid, should check the valid scope
*
* @return: 0 if success, -1 if error
*/
static int fa_checkopt(int argc)
{
/*
if(argc < 5) {
FA_PRINT_ERR("FAIL: input and output file should input\n");
return -1;
}
*/
if(strlen(opt_inputfile) == 0 || strlen(opt_outputfile) == 0) {
FA_PRINT_ERR("FAIL: input and output file should input\n");
return -1;
}
if(opt_framelen > 8192) {
FA_PRINT_ERR("FAIL: the frame length is too large, should <= 8192\n");
return -1;
}
if(opt_fftwintype < HAMMING || opt_fftwintype > KAISER) {
FA_PRINT_ERR("FAIL: fft window type wrong, only 0,1,2,3 active\n");
return -1;
}
if(opt_mdctwintype < MDCT_SINE || opt_mdctwintype > MDCT_KBD) {
FA_PRINT_ERR("FAIL: mdct window type wrong, only 0,1 active\n");
return -1;
}
FA_PRINT("SUCC: check option ok\n");
return 0;
}
/**
* @brief: check the input value valid, should check the valid scope
*
* @return: 0 if success, -1 if error
*/
static int fa_checkopt(int argc)
{
if(argc < 2) {
FA_PRINT("%s\n", default_set);
return 0;
}
/*this is just example*/
if(opt_samplerate > 48000) {
FA_PRINT_ERR("FAIL: the samplerate is not right\n");
return -1;
}
FA_PRINT("SUCC: check option ok\n");
return 0;
}
static void fa_printopt()
{
FA_PRINT("NOTE: configuration is below\n");
FA_PRINT("NOTE: inputfile = %s\n", opt_inputfile);
FA_PRINT("NOTE: outputfile= %s\n", opt_outputfile);
FA_PRINT("NOTE: overlap = %d\n", opt_overlap);
FA_PRINT("NOTE: framelen = %d\n", opt_framelen);
FA_PRINT("NOTE: wintype = %d\n", opt_fftwintype);
FA_PRINT(" (0:hamming; 1:blackman; 2:kaiser)\n");
}
static void fa_printopt()
{
FA_PRINT("NOTE: configuration is below\n");
FA_PRINT("NOTE: verbose : %u\n", opt_verbose);
FA_PRINT("NOTE: fast : %u\n", opt_fast);
FA_PRINT("NOTE: bitrate : %u\n", opt_bitrate);
FA_PRINT("NOTE: samplerate: %u\n", opt_samplerate);
FA_PRINT("NOTE: switch1 : %u\n", opt_switch1);
FA_PRINT("NOTE: switch2 : %u\n", opt_switch2);
}
/**
* @brief: check the input value valid, should check the valid scope
*
* @return: 0 if success, -1 if error
*/
static int fa_checkopt(int argc)
{
if(argc < 5) {
FA_PRINT_ERR("FAIL: input and output file should input\n");
return -1;
}
if(strlen(opt_inputfile) == 0 || strlen(opt_outputfile) == 0) {
FA_PRINT_ERR("FAIL: input and output file should input\n");
return -1;
}
if(opt_framelen > 8192) {
FA_PRINT_ERR("FAIL: the frame length is too large, should <= 8192\n");
return -1;
}
if(opt_winlen > 2048) {
FA_PRINT_ERR("FAIL: the window length is too large, should <= 2048\n");
return -1;
}
if(opt_wintype < HAMMING || opt_wintype > KAISER) {
FA_PRINT_ERR("FAIL: window type wrong, only 0,1,2 active\n");
return -1;
}
if(opt_fc <= 0 || opt_fc >=1) {
FA_PRINT_ERR("FAIL: cutoff freqency should be in (0,1)\n");
return -1;
}
if(opt_fc1 <= 0 || opt_fc1 >=1) {
FA_PRINT_ERR("FAIL: cutoff start freqency should be in (0,1)\n");
return -1;
}
if(opt_fc2 <= 0 || opt_fc2 >=1) {
FA_PRINT_ERR("FAIL: cutoff stop freqency should be in (0,1)\n");
return -1;
}
if(opt_fc1 >= opt_fc2) {
FA_PRINT_ERR("FAIL: cutoff start freqency should < stop freqency\n");
return -1;
}
FA_PRINT("SUCC: check option ok\n");
return 0;
}
/**
* @brief: check the input value valid, should check the valid scope
*
* @return: 0 if success, -1 if error
*/
static int fa_checkopt(int argc)
{
if(argc < 3) {
FA_PRINT_ERR("FAIL: input and output file should input\n");
return -1;
}
if (strlen(opt_outputfile) == 0) {
char tmp[256];
char *t = strrchr(opt_inputfile, '.');
int l = t ? strlen(opt_inputfile) - strlen(t) : strlen(opt_inputfile);
memset(tmp, 0, 256);
memset(opt_outputfile, 0, 256);
strncpy(tmp, opt_inputfile, l);
sprintf(opt_outputfile, "%s.aac", tmp);
}
if(strlen(opt_inputfile) == 0 || strlen(opt_outputfile) == 0) {
FA_PRINT_ERR("FAIL: input and output file should input\n");
return -1;
}
/*
if(opt_bitrate > 256 || opt_bitrate < 32) {
FA_PRINT_ERR("FAIL: the bitrate is too large or too short, should be in [32000, 256000]\n");
return -1;
}
*/
if(opt_speedlevel > 6 || opt_speedlevel < 1) {
FA_PRINT_ERR("FAIL: out of range, should be in [1,6]\n");
return -1;
}
if(opt_bandwidth > 20 || opt_bandwidth < 5) {
FA_PRINT_ERR("FAIL: out of range, should be in [5,20] kHz\n");
return -1;
}
FA_PRINT("SUCC: check option ok\n");
return 0;
}
/**
* @brief: check the input value valid, should check the valid scope
*
* @return: 0 if success, -1 if error
*/
static int fa_checkopt(int argc)
{
if(argc < 5) {
FA_PRINT_ERR("FAIL: input and output file should input\n");
return -1;
}
if(strlen(opt_inputfile) == 0 || strlen(opt_outputfile) == 0) {
FA_PRINT_ERR("FAIL: input and output file should input\n");
return -1;
}
if(opt_framelen > 8192) {
FA_PRINT_ERR("FAIL: the frame length is too large\n");
return -1;
}
FA_PRINT("SUCC: check option ok\n");
return 0;
}
int main(int argc, char *argv[])
{
int ret;
FA_PRINT_INIT(FA_PRINT_ENABLE,
FA_PRINT_FILE_ENABLE,FA_PRINT_STDOUT_ENABLE,FA_PRINT_STDERR_ENABLE,
/*FA_PRINT_FILE_DISABLE,FA_PRINT_STDOUT_ENABLE,FA_PRINT_STDERR_ENABLE,*/
FA_PRINT_PID_ENABLE,
"/tmp", "testlog", "TS");
ret = fa_parseopt(argc, argv);
if(ret)
FA_PRINT_ERR("FAIL: now doing the abnormal things\n");
else
FA_PRINT("SUCC: now doing the normal thing\n");
FA_PRINT_DBG("TEST: now test debug info\n");
FA_PRINT_UNINIT();
return 0;
}
/**
* @brief: check the input value valid, should check the valid scope
*
* @return: 0 if success, -1 if error
*/
static int fa_checkopt(int argc)
{
if(argc < 5) {
FA_PRINT_ERR("FAIL: input and output file should input\n");
return -1;
}
if(strlen(opt_inputfile) == 0) {
FA_PRINT_ERR("FAIL: input and output file should input\n");
return -1;
}
if(strlen(opt_video_outputfile) == 0 && strlen(opt_audio_outputfile) == 0) {
FA_PRINT_ERR("FAIL: input and output file should input\n");
return -1;
}
FA_PRINT("SUCC: check option ok\n");
return 0;
}
static int udpsrv_open(fa_trans_t *trans, char *hostname, int port)
{
struct addrinfo hints, *cur_ai;
udpsrv_context_t *s = NULL;
int ret;
char portstr[10];
int fd = -1;
int tmp;
if (port <= 0 || port >= 65536) {
FA_PRINT("FAIL: %s , [err at: %s-%d]\n", FA_ERR_NETWORK_PORTNO, __FILE__, __LINE__);
return -1; //port is not correct
}
s = fa_malloc(sizeof(udpsrv_context_t));
if (!s) {
FA_PRINT("FAIL: %s , [err at: %s-%d]\n", FA_ERR_SYS_NOMEM, __FILE__, __LINE__);
return -1;
}
memset(&hints, 0, sizeof(hints));
hints.ai_family = AF_UNSPEC;
hints.ai_socktype = SOCK_DGRAM;
snprintf(portstr, sizeof(portstr), "%d", port);
ret = getaddrinfo(hostname, portstr, &hints, &(s->ai)); //cvt the hostname to the address(support ipv6)
if (ret) {
FA_PRINT("FAIL: %s , [err at: %s-%d]\n", FA_ERR_SYS_IO, __FILE__, __LINE__);
goto fail;
}
cur_ai = s->ai;
fd = socket(cur_ai->ai_family, cur_ai->ai_socktype, cur_ai->ai_protocol);
if (fd < 0)
goto fail;
tmp = 1;
setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &tmp, sizeof(tmp));
if (bind (fd, cur_ai->ai_addr, cur_ai->ai_addrlen) < 0) {
char bindmsg[32];
/*snprintf(bindmsg, sizeof(bindmsg), "bind(port %d)", ntohs(cur_ai->ai_addr->sin_port));*/
snprintf(bindmsg, sizeof(bindmsg), "bind fail");
// perror (bindmsg);
FA_PRINT("FAIL: %s , [err at: %s-%d]\n", bindmsg, __FILE__, __LINE__);
closesocket(fd);
return -1;
}
#ifdef UDP_USE_BLOCK
fa_socket_nonblock(fd, 0);
#else
fa_socket_nonblock(fd, 1);
#endif
s->fd = fd;
trans->priv_data = s;
return 0;
fail:
FA_PRINT("FAIL: %s , [err at: %s-%d]\n", FA_ERR_SYS_IO, __FILE__, __LINE__);
if (fd >= 0)
closesocket(fd);
if (s) {
if (s->ai)
freeaddrinfo(s->ai);
fa_free(s);
}
return -1;
}
/**
* @brief: parse the command line
* this is the simple template which will be used by falab projects
*
* @param:argc
* @param:argv[]
*
* @return: 0 if success, -1 if error(input value maybe not right)
*/
int fa_parseopt(int argc, char *argv[])
{
int ret;
const char *die_msg = NULL;
while (1) {
static char * const short_options = "hHLi:o:l:t:";
static struct option long_options[] =
{
{ "help" , 0, 0, 'h'},
{ "long-help" , 0, 0, 'H'},
{ "license" , 0, 0, 'L'},
{ "input" , 1, 0, 'i'},
{ "output" , 1, 0, 'o'},
{ "framelen" , 1, 0, 'l'},
{ "wintype" , 1, 0, 't'},
{ "winlen" , 1, 0, OPT_WINLEN},
{ "firtype" , 1, 0, OPT_FIRTYPE},
{ "cutoff" , 1, 0, OPT_CUTOFF},
{ "cutoff1" , 1, 0, OPT_CUTOFF1},
{ "cutoff2" , 1, 0, OPT_CUTOFF2},
{0 , 0, 0, 0},
};
int c = -1;
int option_index = 0;
c = getopt_long(argc, argv,
short_options, long_options, &option_index);
if (c == -1) {
break;
}
if (!c) {
die_msg = usage;
break;
}
switch (c) {
case 'h': {
die_msg = short_help;
break;
}
case 'H': {
die_msg = long_help;
break;
}
case 'L': {
die_msg = license;
break;
}
case 'i': {
if (sscanf(optarg, "%s", opt_inputfile) > 0) {
FA_PRINT("SUCC: inputfile is %s\n", opt_inputfile);
}else {
FA_PRINT_ERR("FAIL: no inputfile\n");
}
break;
}
case 'o': {
if (sscanf(optarg, "%s", opt_outputfile) > 0) {
FA_PRINT("SUCC: outputfile is %s\n", opt_outputfile);
}else {
FA_PRINT_ERR("FAIL: no outputfile\n");
}
break;
}
case 'l': {
unsigned int i;
if (sscanf(optarg, "%u", &i) > 0) {
opt_framelen = i;
FA_PRINT("SUCC: set frame length = %u\n", opt_framelen);
}
break;
}
case 't': {
unsigned int i;
if (sscanf(optarg, "%u", &i) > 0) {
opt_wintype = i;
FA_PRINT("SUCC: set win type = %u\n", opt_wintype);
}
break;
}
case OPT_WINLEN: {
unsigned int i;
if (sscanf(optarg, "%u", &i) > 0) {
opt_winlen = i;
FA_PRINT("SUCC: set window length = %u\n", opt_winlen);
}
break;
}
case OPT_FIRTYPE: {
unsigned int i;
if (sscanf(optarg, "%u", &i) > 0) {
opt_firtype = i;
FA_PRINT("SUCC: set fir type = %u\n", opt_firtype);
}
break;
}
case OPT_CUTOFF: {
float i;
if (sscanf(optarg, "%f", &i) > 0) {
opt_fc = i;
FA_PRINT("SUCC: set fir cutoff freqency = %f\n", opt_fc);
}
break;
}
case OPT_CUTOFF1:{
float i;
if (sscanf(optarg, "%f", &i) > 0) {
opt_fc1 = i;
FA_PRINT("SUCC: set fir cutoff start freqency = %f\n", opt_fc1);
}
break;
}
case OPT_CUTOFF2:{
float i;
if (sscanf(optarg, "%f", &i) > 0) {
opt_fc2 = i;
FA_PRINT("SUCC: set fir cutoff stop freqency = %f\n", opt_fc2);
}
break;
}
case '?':
default:
die_msg = usage;
break;
}
}
if(die_msg) {
FA_PRINT("%s\n", die_msg);
goto fail;
}
/*check the input validity*/
ret = fa_checkopt(argc);
if(ret) {
die_msg = usage;
FA_PRINT("%s\n", die_msg);
goto fail;
}
/*print the settings*/
fa_printopt();
return 0;
fail:
return -1;
}
static void fa_printopt()
{
FA_PRINT("NOTE: configuration is below\n");
FA_PRINT("NOTE: inputfile = %s\n", opt_inputfile);
FA_PRINT("NOTE: outputfile= %s\n", opt_outputfile);
FA_PRINT("NOTE: framelen = %d\n", opt_framelen);
FA_PRINT("NOTE: window len= %d\n", opt_winlen);
FA_PRINT("NOTE: wintype = %d\n", opt_wintype);
FA_PRINT(" (0:hamming; 1:blackman; 2:kaiser)\n");
FA_PRINT("NOTE: firtype = %d\n", opt_firtype);
FA_PRINT(" (0:lpf; 1:hpf; 2:bandpass; 3:bandstop)\n");
FA_PRINT("NOTE: cutoff = %f\n", opt_fc);
FA_PRINT("NOTE: cutoff1 = %f\n", opt_fc1);
FA_PRINT("NOTE: cutoff2 = %f\n", opt_fc2);
}
/**
* @brief: parse the command line
* this is the simple template which will be used by falab projects
*
* @param:argc
* @param:argv[]
*
* @return: 0 if success, -1 if error(input value maybe not right)
*/
int fa_parseopt(int argc, char *argv[])
{
int ret;
const char *die_msg = NULL;
while (1) {
static char * const short_options = "hHLi:o:l:";
static struct option long_options[] =
{
{ "help" , 0, 0, 'h'},
{ "long-help" , 0, 0, 'H'},
{ "license" , 0, 0, 'L'},
{ "input" , 1, 0, 'i'},
{ "output" , 1, 0, 'o'},
{ "framelen" , 1, 0, 'l'},
{0 , 0, 0, 0},
};
int c = -1;
int option_index = 0;
c = getopt_long(argc, argv,
short_options, long_options, &option_index);
if (c == -1) {
break;
}
if (!c) {
die_msg = usage;
break;
}
switch (c) {
case 'h': {
die_msg = short_help;
break;
}
case 'H': {
die_msg = long_help;
break;
}
case 'L': {
die_msg = license;
break;
}
case 'i': {
if (sscanf(optarg, "%s", opt_inputfile) > 0) {
FA_PRINT("SUCC: inputfile is %s\n", opt_inputfile);
}else {
FA_PRINT_ERR("FAIL: no inputfile\n");
}
break;
}
case 'o': {
if (sscanf(optarg, "%s", opt_outputfile) > 0) {
FA_PRINT("SUCC: outputfile is %s\n", opt_outputfile);
}else {
FA_PRINT_ERR("FAIL: no outputfile\n");
}
break;
}
case 'l': {
unsigned int i;
if (sscanf(optarg, "%u", &i) > 0) {
opt_framelen = i;
FA_PRINT("SUCC: set frame length = %u\n", opt_framelen);
}
break;
}
case '?':
default:
die_msg = usage;
break;
}
}
if(die_msg) {
FA_PRINT("%s\n", die_msg);
goto fail;
}
/*check the input validity*/
ret = fa_checkopt(argc);
if(ret) {
die_msg = usage;
FA_PRINT("%s\n", die_msg);
goto fail;
}
/*print the settings*/
fa_printopt();
return 0;
fail:
return -1;
}
/**
* @brief: parse the command line
* this is the simple template which will be used by falab projects
*
* @param:argc
* @param:argv[]
*
* @return: 0 if success, -1 if error(input value maybe not right)
*/
int fa_parseopt(int argc, char *argv[])
{
int ret;
const char *die_msg = NULL;
while (1) {
static char * const short_options = "hHLli:v:a:";
static struct option long_options[] =
{
{ "help" , 0, 0, 'h'},
{ "help" , 0, 0, 'H'},
{ "license" , 0, 0, 'L'},
{ "license" , 0, 0, 'l'},
{ "input" , 1, 0, 'i'},
{ "video output" , 1, 0, 'v'},
{ "audio output" , 1, 0, 'a'},
{0 , 0, 0, 0},
};
int c = -1;
int option_index = 0;
c = getopt_long(argc, argv, short_options, long_options, &option_index);
if (c == -1) {
break;
}
if (!c) {
die_msg = usage;
break;
}
switch (c) {
case 'h': {
die_msg = help;
break;
}
case 'H': {
die_msg = help;
break;
}
case 'L': {
die_msg = license;
break;
}
case 'l': {
die_msg = license;
break;
}
case 'i': {
if (sscanf(optarg, "%s", opt_inputfile) > 0) {
FA_PRINT("SUCC: inputfile is %s\n", opt_inputfile);
} else {
FA_PRINT_ERR("FAIL: no inputfile\n");
}
break;
}
case 'v': {
if (sscanf(optarg, "%s", opt_video_outputfile) > 0) {
FA_PRINT("SUCC: video outputfile is %s\n", opt_video_outputfile);
} else {
FA_PRINT_ERR("FAIL: no video outputfile\n");
}
break;
}
case 'a': {
if (sscanf(optarg, "%s", opt_audio_outputfile) > 0) {
FA_PRINT("SUCC: audio outputfile is %s\n", opt_audio_outputfile);
} else {
FA_PRINT_ERR("FAIL: no audio outputfile\n");
}
break;
}
case '?':
default:
die_msg = usage;
break;
}
}
if(die_msg) {
FA_PRINT("%s\n", die_msg);
goto fail;
}
/*check the input validity*/
ret = fa_checkopt(argc);
if(ret) {
die_msg = usage;
FA_PRINT("%s\n", die_msg);
goto fail;
}
/*print the settings*/
fa_printopt();
return 0;
fail:
return -1;
}
/**
* @brief: parse the command line
* this is the simple template which will be used by falab projects
*
* @param:argc
* @param:argv[]
*
* @return: 0 if success, -1 if error(input value maybe not right)
*/
int fa_parseopt(int argc, char *argv[])
{
int ret;
const char *die_msg = NULL;
while (1) {
static char * const short_options = "hHLvfb:R:";
static struct option long_options[] =
{
{ "help" , 0, 0, 'h'},
{ "long-help" , 0, 0, 'H'},
{ "license" , 0, 0, 'L'},
{ "verbose" , 0, 0, 'v'},
{ "fast" , 0, 0, 'f'},
{ "bitrate" , 1, 0, 'b'}, // need 1 argument
{ "samplerate" , 1, 0, 'R'}, // need 1 argument
{ "switch1" , 0, 0, SWITCH1_FLAG}, // --switch1 will return SWIATCH1_FLAG
{ "switch2" , 1, 0, SWITCH2_FLAG}, // --switch2 will return SWIATCH2_FLAG
{0 , 0, 0, 0},
};
int c = -1;
int option_index = 0;
c = getopt_long(argc, argv,
short_options, long_options, &option_index);
if (c == -1) {
break;
}
if (!c) {
die_msg = usage;
break;
}
switch (c) {
case 'h': {
die_msg = short_help;
break;
}
case 'H': {
die_msg = long_help;
break;
}
case 'L': {
die_msg = license;
break;
}
case 'v': {
opt_verbose = 1;
FA_PRINT("SUCC: verbose mode active\n");
break;
}
case 'f': {
opt_fast = 1;
FA_PRINT("SUCC: fast mode active\n");
break;
}
case 'b': {
unsigned int i;
if (sscanf(optarg, "%u", &i) > 0) {
opt_bitrate = 1000 * i;
FA_PRINT("SUCC: set bitrate=%u\n", opt_bitrate);
}else {
opt_bitrate = 0;
FA_PRINT("WARN: bitrate not set\n");
}
break;
}
case 'R': {
unsigned int i;
if (sscanf(optarg, "%u", &i) > 0) {
opt_samplerate = i;
FA_PRINT("SUCC: set samplerate=%u\n", opt_samplerate);
}else {
opt_samplerate = 0;
FA_PRINT("WARN: samplerate not set\n");
}
break;
}
case SWITCH1_FLAG:{
opt_switch1 = 1;
FA_PRINT("SUCC: switch1 set, default = 1 \n");
break;
}
case SWITCH2_FLAG:{
unsigned int i;
if (sscanf(optarg, "%d", &i) > 0) {
opt_switch2 = i;
FA_PRINT("SUCC: set switch2=%d\n", opt_switch2);
}else {
opt_switch2 = 0;
FA_PRINT("WARN: switch2 not set\n");
}
break;
}
case '?':
default:
die_msg = usage;
break;
}
}
if(die_msg) {
FA_PRINT("%s\n", die_msg);
goto fail;
}
/*check the input validity*/
ret = fa_checkopt(argc);
if(ret) {
die_msg = usage;
goto fail;
}
/*print the settings*/
fa_printopt();
return 0;
fail:
return -1;
}
int main()
{
fa_trans_t *trans;
int port;
char hostname[1024];
int recv_len;
int real_recv_len;
char buf[TRANS_BUF_SIZE];
#ifdef USE_LOGFILE
#ifdef WIN32
FA_PRINT_INIT(FA_PRINT_ENABLE,
FA_PRINT_FILE_ENABLE,FA_PRINT_STDOUT_ENABLE,FA_PRINT_STDERR_ENABLE,
FA_PRINT_PID_ENABLE,
".\\log_udpsrv\\", "udpsrvlog", "UDPSRV", 10);
#else
FA_PRINT_INIT(FA_PRINT_ENABLE,
FA_PRINT_FILE_ENABLE,FA_PRINT_STDOUT_ENABLE,FA_PRINT_STDERR_ENABLE,
FA_PRINT_PID_ENABLE,
"./log_udpsrv/", "udpsrvlog", "UDPSRV", 10);
#endif
#endif
if (fa_network_init()) {
FA_PRINT("FAIL: %s , [err at: %s-%d]\n", FA_ERR_SYS_IO, __FILE__, __LINE__);
return -1;
}
#ifdef __GNUC__
fa_sigpipe_init(NULL);
#endif
strcpy(hostname, "192.168.20.82");
/*strcpy(hostname, "192.168.20.38");*/
port = 1984;
/*create trans unit*/
trans = fa_create_trans(fa_create_trans_udpsrv, fa_destroy_trans_udpsrv);
/*try to open trans*/
if(trans->open(trans,hostname,port)<0) {
printf("open fail\n");
return -1;
}
recv_len = TRANS_BUF_SIZE;
while(1) {
char buf1[128];
real_recv_len = trans->recv(trans, buf, recv_len);
if (real_recv_len == -2)
printf("recv time out, continue try \n");
else {
printf("-->want %d, recv %d bytes\n", recv_len, real_recv_len);
#if 1
sprintf(buf1, "recv %d bytes\n", real_recv_len);
trans->send(trans, buf1, strlen(buf1));
#endif
}
if(real_recv_len< 0) {
printf("recv fail\n");
continue;
}
}
fa_network_close();
return 0;
}
