C++ (Cpp) FSMC_BCR Examples

Example #1

File: setup.c Project: Jokymon/barebox

static int nhk8815_devices_init(void)
{
	writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
	writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);

	/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
	writel(0x0000305b, FSMC_BCR(1));
	writel(0x00033f33, FSMC_BTR(1));

	add_generic_device("smc91c111", DEVICE_ID_DYNAMIC, NULL, 0x34000300, 16,
			   IORESOURCE_MEM, NULL);

	platform_device_register(&nhk8815_nand_device);

	armlinux_set_architecture(MACH_TYPE_NOMADIK);
	armlinux_set_bootparams((void *)(0x00000100));

	devfs_add_partition("nand0", 0x0000000, 0x040000, DEVFS_PARTITION_FIXED, "xloader_raw");
	devfs_add_partition("nand0", 0x0040000, 0x080000, DEVFS_PARTITION_FIXED, "meminit_raw");
	devfs_add_partition("nand0", 0x0080000, 0x200000, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", 0x7FE0000, 0x020000, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");

	return 0;
}

Example #2

File: setup.c Project: ray650128/barebox-sh4-nextvod

static int nhk8815_devices_init(void)
{
	st8815_add_device_sdram(64 * 1024 *1024);

	writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
	writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);

	/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
	writel(0x0000305b, FSMC_BCR(1));
	writel(0x00033f33, FSMC_BTR(1));

	register_device(&nhk8815_network_dev);

	register_device(&nhk8815_nand_device);

	armlinux_set_architecture(MACH_TYPE_NOMADIK);
	armlinux_set_bootparams((void *)(0x00000100));

	devfs_add_partition("nand0", 0x0000000, 0x040000, PARTITION_FIXED, "xloader_raw");
	devfs_add_partition("nand0", 0x0040000, 0x080000, PARTITION_FIXED, "meminit_raw");
	devfs_add_partition("nand0", 0x0080000, 0x200000, PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", 0x7FE0000, 0x020000, PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");

	return 0;
}

Example #3

File: board-nhk8815.c Project: ClarkChen633/am335x-linux

static void __init nhk8815_onenand_init(void)
{
#ifdef CONFIG_MTD_ONENAND
       /* Set up SMCS0 for OneNand */
	writel(0x000030db, FSMC_BCR(0));
	writel(0x02100551, FSMC_BTR(0));
#endif
}