static void
pfr_glyph_end( PFR_Glyph glyph )
{
/* close current contour if any */
pfr_glyph_close_contour( glyph );
/* merge the current glyph into the stack */
FT_GlyphLoader_Add( glyph->loader );
}
cf2_outline_close( CF2_Outline outline )
{
CFF_Decoder* decoder = outline->decoder;
FT_ASSERT( decoder );
cff_builder_close_contour( &decoder->builder );
FT_GlyphLoader_Add( decoder->builder.loader );
}
static FT_Error
af_loader_load_g( AF_Loader loader,
AF_Scaler scaler,
FT_UInt glyph_index,
FT_Int32 load_flags,
FT_UInt depth )
{
FT_Error error;
FT_Face face = loader->face;
FT_GlyphLoader gloader = loader->gloader;
AF_ScriptMetrics metrics = loader->metrics;
AF_GlyphHints hints = &loader->hints;
FT_GlyphSlot slot = face->glyph;
FT_Slot_Internal internal = slot->internal;
FT_Int32 flags;
flags = load_flags | FT_LOAD_LINEAR_DESIGN;
error = FT_Load_Glyph( face, glyph_index, flags );
if ( error )
goto Exit;
loader->transformed = internal->glyph_transformed;
if ( loader->transformed )
{
FT_Matrix inverse;
loader->trans_matrix = internal->glyph_matrix;
loader->trans_delta = internal->glyph_delta;
inverse = loader->trans_matrix;
FT_Matrix_Invert( &inverse );
FT_Vector_Transform( &loader->trans_delta, &inverse );
}
switch ( slot->format )
{
case FT_GLYPH_FORMAT_OUTLINE:
/* translate the loaded glyph when an internal transform is needed */
if ( loader->transformed )
FT_Outline_Translate( &slot->outline,
loader->trans_delta.x,
loader->trans_delta.y );
/* copy the outline points in the loader's current */
/* extra points which are used to keep original glyph coordinates */
error = FT_GLYPHLOADER_CHECK_POINTS( gloader,
slot->outline.n_points + 4,
slot->outline.n_contours );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.outline.points,
slot->outline.points,
slot->outline.n_points );
FT_ARRAY_COPY( gloader->current.outline.contours,
slot->outline.contours,
slot->outline.n_contours );
FT_ARRAY_COPY( gloader->current.outline.tags,
slot->outline.tags,
slot->outline.n_points );
gloader->current.outline.n_points = slot->outline.n_points;
gloader->current.outline.n_contours = slot->outline.n_contours;
/* compute original horizontal phantom points (and ignore */
/* vertical ones) */
loader->pp1.x = hints->x_delta;
loader->pp1.y = hints->y_delta;
loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance,
hints->x_scale ) + hints->x_delta;
loader->pp2.y = hints->y_delta;
/* be sure to check for spacing glyphs */
if ( slot->outline.n_points == 0 )
goto Hint_Metrics;
/* now load the slot image into the auto-outline and run the */
/* automatic hinting process */
if ( metrics->clazz->script_hints_apply )
metrics->clazz->script_hints_apply( hints,
&gloader->current.outline,
metrics );
/* we now need to adjust the metrics according to the change in */
/* width/positioning that occurred during the hinting process */
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT )
{
FT_Pos old_rsb, old_lsb, new_lsb;
FT_Pos pp1x_uh, pp2x_uh;
AF_AxisHints axis = &hints->axis[AF_DIMENSION_HORZ];
AF_Edge edge1 = axis->edges; /* leftmost edge */
AF_Edge edge2 = edge1 +
axis->num_edges - 1; /* rightmost edge */
if ( axis->num_edges > 1 && AF_HINTS_DO_ADVANCE( hints ) )
{
old_rsb = loader->pp2.x - edge2->opos;
old_lsb = edge1->opos;
new_lsb = edge1->pos;
/* remember unhinted values to later account */
/* for rounding errors */
pp1x_uh = new_lsb - old_lsb;
pp2x_uh = edge2->pos + old_rsb;
/* prefer too much space over too little space */
/* for very small sizes */
if ( old_lsb < 24 )
pp1x_uh -= 8;
if ( old_rsb < 24 )
pp2x_uh += 8;
loader->pp1.x = FT_PIX_ROUND( pp1x_uh );
loader->pp2.x = FT_PIX_ROUND( pp2x_uh );
if ( loader->pp1.x >= new_lsb && old_lsb > 0 )
loader->pp1.x -= 64;
if ( loader->pp2.x <= edge2->pos && old_rsb > 0 )
loader->pp2.x += 64;
slot->lsb_delta = loader->pp1.x - pp1x_uh;
slot->rsb_delta = loader->pp2.x - pp2x_uh;
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x );
loader->pp2.x = FT_PIX_ROUND( pp2x );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
}
else
{
FT_Pos pp1x = loader->pp1.x;
FT_Pos pp2x = loader->pp2.x;
loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta );
loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta );
slot->lsb_delta = loader->pp1.x - pp1x;
slot->rsb_delta = loader->pp2.x - pp2x;
}
/* good, we simply add the glyph to our loader's base */
FT_GlyphLoader_Add( gloader );
break;
case FT_GLYPH_FORMAT_COMPOSITE:
{
FT_UInt nn, num_subglyphs = slot->num_subglyphs;
FT_UInt num_base_subgs, start_point;
FT_SubGlyph subglyph;
start_point = gloader->base.outline.n_points;
/* first of all, copy the subglyph descriptors in the glyph loader */
error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.subglyphs,
slot->subglyphs,
num_subglyphs );
gloader->current.num_subglyphs = num_subglyphs;
num_base_subgs = gloader->base.num_subglyphs;
/* now read each subglyph independently */
for ( nn = 0; nn < num_subglyphs; nn++ )
{
FT_Vector pp1, pp2;
FT_Pos x, y;
FT_UInt num_points, num_new_points, num_base_points;
/* gloader.current.subglyphs can change during glyph loading due */
/* to re-allocation -- we must recompute the current subglyph on */
/* each iteration */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
pp1 = loader->pp1;
pp2 = loader->pp2;
num_base_points = gloader->base.outline.n_points;
error = af_loader_load_g( loader, scaler, subglyph->index,
load_flags, depth + 1 );
if ( error )
goto Exit;
/* recompute subglyph pointer */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
if ( subglyph->flags & FT_SUBGLYPH_FLAG_USE_MY_METRICS )
{
pp1 = loader->pp1;
pp2 = loader->pp2;
}
else
{
loader->pp1 = pp1;
loader->pp2 = pp2;
}
num_points = gloader->base.outline.n_points;
num_new_points = num_points - num_base_points;
/* now perform the transformation required for this subglyph */
if ( subglyph->flags & ( FT_SUBGLYPH_FLAG_SCALE |
FT_SUBGLYPH_FLAG_XY_SCALE |
FT_SUBGLYPH_FLAG_2X2 ) )
{
FT_Vector* cur = gloader->base.outline.points +
num_base_points;
FT_Vector* limit = cur + num_new_points;
for ( ; cur < limit; cur++ )
FT_Vector_Transform( cur, &subglyph->transform );
}
/* apply offset */
if ( !( subglyph->flags & FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ) )
{
FT_Int k = subglyph->arg1;
FT_UInt l = subglyph->arg2;
FT_Vector* p1;
FT_Vector* p2;
if ( start_point + k >= num_base_points ||
l >= (FT_UInt)num_new_points )
{
error = AF_Err_Invalid_Composite;
goto Exit;
}
l += num_base_points;
/* for now, only use the current point coordinates; */
/* we eventually may consider another approach */
p1 = gloader->base.outline.points + start_point + k;
p2 = gloader->base.outline.points + start_point + l;
x = p1->x - p2->x;
y = p1->y - p2->y;
}
else
{
x = FT_MulFix( subglyph->arg1, hints->x_scale ) + hints->x_delta;
y = FT_MulFix( subglyph->arg2, hints->y_scale ) + hints->y_delta;
x = FT_PIX_ROUND( x );
y = FT_PIX_ROUND( y );
}
{
FT_Outline dummy = gloader->base.outline;
dummy.points += num_base_points;
dummy.n_points = (short)num_new_points;
FT_Outline_Translate( &dummy, x, y );
}
}
}
break;
default:
/* we don't support other formats (yet?) */
error = AF_Err_Unimplemented_Feature;
}
Hint_Metrics:
if ( depth == 0 )
{
FT_BBox bbox;
FT_Vector vvector;
vvector.x = slot->metrics.vertBearingX - slot->metrics.horiBearingX;
vvector.y = slot->metrics.vertBearingY - slot->metrics.horiBearingY;
vvector.x = FT_MulFix( vvector.x, metrics->scaler.x_scale );
vvector.y = FT_MulFix( vvector.y, metrics->scaler.y_scale );
/* transform the hinted outline if needed */
if ( loader->transformed )
{
FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix );
FT_Vector_Transform( &vvector, &loader->trans_matrix );
}
#if 1
/* we must translate our final outline by -pp1.x and compute */
/* the new metrics */
if ( loader->pp1.x )
FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 );
#endif
FT_Outline_Get_CBox( &gloader->base.outline, &bbox );
bbox.xMin = FT_PIX_FLOOR( bbox.xMin );
bbox.yMin = FT_PIX_FLOOR( bbox.yMin );
bbox.xMax = FT_PIX_CEIL( bbox.xMax );
bbox.yMax = FT_PIX_CEIL( bbox.yMax );
slot->metrics.width = bbox.xMax - bbox.xMin;
slot->metrics.height = bbox.yMax - bbox.yMin;
slot->metrics.horiBearingX = bbox.xMin;
slot->metrics.horiBearingY = bbox.yMax;
slot->metrics.vertBearingX = FT_PIX_FLOOR( bbox.xMin + vvector.x );
slot->metrics.vertBearingY = FT_PIX_FLOOR( bbox.yMax + vvector.y );
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width; ditto for */
/* digits if all have the same advance width */
#if 0
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
x_scale );
#else
if ( scaler->render_mode != FT_RENDER_MODE_LIGHT &&
( FT_IS_FIXED_WIDTH( slot->face ) ||
( af_face_globals_is_digit( loader->globals, glyph_index ) &&
metrics->digits_have_same_width ) ) )
{
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
metrics->scaler.x_scale );
/* Set delta values to 0. Otherwise code that uses them is */
/* going to ruin the fixed advance width. */
slot->lsb_delta = 0;
slot->rsb_delta = 0;
}
else
{
/* non-spacing glyphs must stay as-is */
if ( slot->metrics.horiAdvance )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
}
#endif
slot->metrics.vertAdvance = FT_MulFix( slot->metrics.vertAdvance,
metrics->scaler.y_scale );
slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance );
slot->metrics.vertAdvance = FT_PIX_ROUND( slot->metrics.vertAdvance );
/* now copy outline into glyph slot */
FT_GlyphLoader_Rewind( internal->loader );
error = FT_GlyphLoader_CopyPoints( internal->loader, gloader );
if ( error )
goto Exit;
/* reassign all outline fields except flags to protect them */
slot->outline.n_contours = internal->loader->base.outline.n_contours;
slot->outline.n_points = internal->loader->base.outline.n_points;
slot->outline.points = internal->loader->base.outline.points;
slot->outline.tags = internal->loader->base.outline.tags;
slot->outline.contours = internal->loader->base.outline.contours;
slot->format = FT_GLYPH_FORMAT_OUTLINE;
}
Exit:
return error;
}
t1_decoder_parse_charstrings( T1_Decoder decoder,
FT_Byte* charstring_base,
FT_UInt charstring_len )
{
FT_Error error;
T1_Decoder_Zone zone;
FT_Byte* ip;
FT_Byte* limit;
T1_Builder builder = &decoder->builder;
FT_Pos x, y, orig_x, orig_y;
T1_Hints_Funcs hinter;
/* we don't want to touch the source code -- use macro trick */
#define start_point t1_builder_start_point
#define check_points t1_builder_check_points
#define add_point t1_builder_add_point
#define add_point1 t1_builder_add_point1
#define add_contour t1_builder_add_contour
#define close_contour t1_builder_close_contour
/* First of all, initialize the decoder */
decoder->top = decoder->stack;
decoder->zone = decoder->zones;
zone = decoder->zones;
builder->parse_state = T1_Parse_Start;
hinter = (T1_Hints_Funcs)builder->hints_funcs;
zone->base = charstring_base;
limit = zone->limit = charstring_base + charstring_len;
ip = zone->cursor = zone->base;
error = PSaux_Err_Ok;
x = orig_x = builder->pos_x;
y = orig_y = builder->pos_y;
/* begin hints recording session, if any */
if ( hinter )
hinter->open( hinter->hints );
/* now, execute loop */
while ( ip < limit )
{
FT_Long* top = decoder->top;
T1_Operator op = op_none;
FT_Long value = 0;
/*********************************************************************/
/* */
/* Decode operator or operand */
/* */
/* */
/* first of all, decompress operator or value */
switch ( *ip++ )
{
case 1:
op = op_hstem;
break;
case 3:
op = op_vstem;
break;
case 4:
op = op_vmoveto;
break;
case 5:
op = op_rlineto;
break;
case 6:
op = op_hlineto;
break;
case 7:
op = op_vlineto;
break;
case 8:
op = op_rrcurveto;
break;
case 9:
op = op_closepath;
break;
case 10:
op = op_callsubr;
break;
case 11:
op = op_return;
break;
case 13:
op = op_hsbw;
break;
case 14:
op = op_endchar;
break;
case 15: /* undocumented, obsolete operator */
op = op_none;
break;
case 21:
op = op_rmoveto;
break;
case 22:
op = op_hmoveto;
break;
case 30:
op = op_vhcurveto;
break;
case 31:
op = op_hvcurveto;
break;
case 12:
if ( ip > limit )
{
FT_ERROR(( "t1_decoder_parse_charstrings: "
"invalid escape (12+EOF)\n" ));
goto Syntax_Error;
}
switch ( *ip++ )
{
case 0:
op = op_dotsection;
break;
case 1:
op = op_vstem3;
break;
case 2:
op = op_hstem3;
break;
case 6:
op = op_seac;
break;
case 7:
op = op_sbw;
break;
case 12:
op = op_div;
break;
case 16:
op = op_callothersubr;
break;
case 17:
op = op_pop;
break;
case 33:
op = op_setcurrentpoint;
break;
default:
FT_ERROR(( "t1_decoder_parse_charstrings: "
"invalid escape (12+%d)\n",
ip[-1] ));
goto Syntax_Error;
}
break;
case 255: /* four bytes integer */
if ( ip + 4 > limit )
{
FT_ERROR(( "t1_decoder_parse_charstrings: "
"unexpected EOF in integer\n" ));
goto Syntax_Error;
}
value = (FT_Int32)( ((FT_Long)ip[0] << 24) |
((FT_Long)ip[1] << 16) |
((FT_Long)ip[2] << 8 ) |
ip[3] );
ip += 4;
break;
default:
if ( ip[-1] >= 32 )
{
if ( ip[-1] < 247 )
value = (FT_Long)ip[-1] - 139;
else
{
if ( ++ip > limit )
{
FT_ERROR(( "t1_decoder_parse_charstrings: " ));
FT_ERROR(( "unexpected EOF in integer\n" ));
goto Syntax_Error;
}
if ( ip[-2] < 251 )
value = ( ( (FT_Long)ip[-2] - 247 ) << 8 ) + ip[-1] + 108;
else
value = -( ( ( (FT_Long)ip[-2] - 251 ) << 8 ) + ip[-1] + 108 );
}
}
else
{
FT_ERROR(( "t1_decoder_parse_charstrings: "
"invalid byte (%d)\n", ip[-1] ));
goto Syntax_Error;
}
}
/*********************************************************************/
/* */
/* Push value on stack, or process operator */
/* */
/* */
if ( op == op_none )
{
if ( top - decoder->stack >= T1_MAX_CHARSTRINGS_OPERANDS )
{
FT_ERROR(( "t1_decoder_parse_charstrings: stack overflow!\n" ));
goto Syntax_Error;
}
FT_TRACE4(( " %ld", value ));
*top++ = value;
decoder->top = top;
}
else if ( op == op_callothersubr ) /* callothersubr */
{
FT_TRACE4(( " callothersubr" ));
if ( top - decoder->stack < 2 )
goto Stack_Underflow;
top -= 2;
switch ( (FT_Int)top[1] )
{
case 1: /* start flex feature */
if ( top[0] != 0 )
goto Unexpected_OtherSubr;
decoder->flex_state = 1;
decoder->num_flex_vectors = 0;
if ( start_point( builder, x, y ) ||
check_points( builder, 6 ) )
goto Fail;
break;
case 2: /* add flex vectors */
{
FT_Int idx;
if ( top[0] != 0 )
goto Unexpected_OtherSubr;
/* note that we should not add a point for index 0; */
/* this will move our current position to the flex */
/* point without adding any point to the outline */
idx = decoder->num_flex_vectors++;
if ( idx > 0 && idx < 7 )
add_point( builder,
x,
y,
(FT_Byte)( idx == 3 || idx == 6 ) );
}
break;
case 0: /* end flex feature */
if ( top[0] != 3 )
goto Unexpected_OtherSubr;
if ( decoder->flex_state == 0 ||
decoder->num_flex_vectors != 7 )
{
FT_ERROR(( "t1_decoder_parse_charstrings: "
"unexpected flex end\n" ));
goto Syntax_Error;
}
/* now consume the remaining `pop pop setcurpoint' */
if ( ip + 6 > limit ||
ip[0] != 12 || ip[1] != 17 || /* pop */
ip[2] != 12 || ip[3] != 17 || /* pop */
ip[4] != 12 || ip[5] != 33 ) /* setcurpoint */
{
FT_ERROR(( "t1_decoder_parse_charstrings: "
"invalid flex charstring\n" ));
goto Syntax_Error;
}
ip += 6;
decoder->flex_state = 0;
break;
case 3: /* change hints */
if ( top[0] != 1 )
goto Unexpected_OtherSubr;
/* eat the following `pop' */
if ( ip + 2 > limit )
{
FT_ERROR(( "t1_decoder_parse_charstrings: "
"invalid escape (12+%d)\n", ip[-1] ));
goto Syntax_Error;
}
if ( ip[0] != 12 || ip[1] != 17 )
{
FT_ERROR(( "t1_decoder_parse_charstrings: " ));
FT_ERROR(( "`pop' expected, found (%d %d)\n", ip[0], ip[1] ));
goto Syntax_Error;
}
ip += 2;
if ( hinter )
hinter->reset( hinter->hints, builder->current->n_points );
break;
case 12:
case 13:
/* counter control hints, clear stack */
top = decoder->stack;
break;
case 14:
case 15:
case 16:
case 17:
case 18: /* multiple masters */
{
PS_Blend blend = decoder->blend;
FT_UInt num_points, nn, mm;
FT_Long* delta;
FT_Long* values;
if ( !blend )
{
FT_ERROR(( "t1_decoder_parse_charstrings: " ));
FT_ERROR(( "unexpected multiple masters operator!\n" ));
goto Syntax_Error;
}
num_points = (FT_UInt)top[1] - 13 + ( top[1] == 18 );
if ( top[0] != (FT_Int)( num_points * blend->num_designs ) )
{
FT_ERROR(( "t1_decoder_parse_charstrings: " ));
FT_ERROR(( "incorrect number of mm arguments\n" ));
goto Syntax_Error;
}
top -= blend->num_designs * num_points;
if ( top < decoder->stack )
goto Stack_Underflow;
/* we want to compute: */
/* */
/* a0*w0 + a1*w1 + ... + ak*wk */
/* */
/* but we only have the a0, a1-a0, a2-a0, .. ak-a0 */
/* however, given that w0 + w1 + ... + wk == 1, we can */
/* rewrite it easily as: */
/* */
/* a0 + (a1-a0)*w1 + (a2-a0)*w2 + .. + (ak-a0)*wk */
/* */
/* where k == num_designs-1 */
/* */
/* I guess that's why it's written in this `compact' */
/* form. */
/* */
delta = top + num_points;
values = top;
for ( nn = 0; nn < num_points; nn++ )
{
FT_Long tmp = values[0];
for ( mm = 1; mm < blend->num_designs; mm++ )
tmp += FT_MulFix( *delta++, blend->weight_vector[mm] );
*values++ = tmp;
}
/* note that `top' will be incremented later by calls to `pop' */
break;
}
default:
Unexpected_OtherSubr:
FT_ERROR(( "t1_decoder_parse_charstrings: "
"invalid othersubr [%d %d]!\n", top[0], top[1] ));
goto Syntax_Error;
}
decoder->top = top;
}
else /* general operator */
{
FT_Int num_args = t1_args_count[op];
if ( top - decoder->stack < num_args )
goto Stack_Underflow;
top -= num_args;
switch ( op )
{
case op_endchar:
FT_TRACE4(( " endchar" ));
close_contour( builder );
/* close hints recording session */
if ( hinter )
{
if (hinter->close( hinter->hints, builder->current->n_points ))
goto Syntax_Error;
/* apply hints to the loaded glyph outline now */
hinter->apply( hinter->hints,
builder->current,
(PSH_Globals) builder->hints_globals,
decoder->hint_mode );
}
/* add current outline to the glyph slot */
FT_GlyphLoader_Add( builder->loader );
/* return now! */
FT_TRACE4(( "\n\n" ));
return PSaux_Err_Ok;
case op_hsbw:
FT_TRACE4(( " hsbw" ));
builder->parse_state = T1_Parse_Have_Width;
builder->left_bearing.x += top[0];
builder->advance.x = top[1];
builder->advance.y = 0;
orig_x = builder->last.x = x = builder->pos_x + top[0];
orig_y = builder->last.y = y = builder->pos_y;
FT_UNUSED( orig_y );
/* the `metrics_only' indicates that we only want to compute */
/* the glyph's metrics (lsb + advance width), not load the */
/* rest of it; so exit immediately */
if ( builder->metrics_only )
return PSaux_Err_Ok;
break;
case op_seac:
/* return immediately after the processing */
return t1operator_seac( decoder, top[0], top[1], top[2],
(FT_Int)top[3], (FT_Int)top[4] );
case op_sbw:
FT_TRACE4(( " sbw" ));
builder->parse_state = T1_Parse_Have_Width;
builder->left_bearing.x += top[0];
builder->left_bearing.y += top[1];
builder->advance.x = top[2];
builder->advance.y = top[3];
builder->last.x = x = builder->pos_x + top[0];
builder->last.y = y = builder->pos_y + top[1];
/* the `metrics_only' indicates that we only want to compute */
/* the glyph's metrics (lsb + advance width), not load the */
/* rest of it; so exit immediately */
if ( builder->metrics_only )
return PSaux_Err_Ok;
break;
case op_closepath:
FT_TRACE4(( " closepath" ));
close_contour( builder );
if ( !( builder->parse_state == T1_Parse_Have_Path ||
builder->parse_state == T1_Parse_Have_Moveto ) )
goto Syntax_Error;
builder->parse_state = T1_Parse_Have_Width;
break;
case op_hlineto:
FT_TRACE4(( " hlineto" ));
if ( start_point( builder, x, y ) )
goto Fail;
x += top[0];
goto Add_Line;
case op_hmoveto:
FT_TRACE4(( " hmoveto" ));
x += top[0];
if ( !decoder->flex_state )
{
if ( builder->parse_state == T1_Parse_Start )
goto Syntax_Error;
builder->parse_state = T1_Parse_Have_Moveto;
}
break;
case op_hvcurveto:
FT_TRACE4(( " hvcurveto" ));
if ( start_point( builder, x, y ) ||
check_points( builder, 3 ) )
goto Fail;
x += top[0];
add_point( builder, x, y, 0 );
x += top[1];
y += top[2];
add_point( builder, x, y, 0 );
y += top[3];
add_point( builder, x, y, 1 );
break;
case op_rlineto:
FT_TRACE4(( " rlineto" ));
if ( start_point( builder, x, y ) )
goto Fail;
x += top[0];
y += top[1];
Add_Line:
if ( add_point1( builder, x, y ) )
goto Fail;
break;
case op_rmoveto:
FT_TRACE4(( " rmoveto" ));
x += top[0];
y += top[1];
if ( !decoder->flex_state )
{
if ( builder->parse_state == T1_Parse_Start )
goto Syntax_Error;
builder->parse_state = T1_Parse_Have_Moveto;
}
break;
case op_rrcurveto:
FT_TRACE4(( " rcurveto" ));
if ( start_point( builder, x, y ) ||
check_points( builder, 3 ) )
goto Fail;
x += top[0];
y += top[1];
add_point( builder, x, y, 0 );
x += top[2];
y += top[3];
add_point( builder, x, y, 0 );
x += top[4];
y += top[5];
add_point( builder, x, y, 1 );
break;
case op_vhcurveto:
FT_TRACE4(( " vhcurveto" ));
if ( start_point( builder, x, y ) ||
check_points( builder, 3 ) )
goto Fail;
y += top[0];
add_point( builder, x, y, 0 );
x += top[1];
y += top[2];
add_point( builder, x, y, 0 );
x += top[3];
add_point( builder, x, y, 1 );
break;
case op_vlineto:
FT_TRACE4(( " vlineto" ));
if ( start_point( builder, x, y ) )
goto Fail;
y += top[0];
goto Add_Line;
case op_vmoveto:
FT_TRACE4(( " vmoveto" ));
y += top[0];
if ( !decoder->flex_state )
{
if ( builder->parse_state == T1_Parse_Start )
goto Syntax_Error;
builder->parse_state = T1_Parse_Have_Moveto;
}
break;
case op_div:
FT_TRACE4(( " div" ));
if ( top[1] )
{
*top = top[0] / top[1];
++top;
}
else
{
FT_ERROR(( "t1_decoder_parse_charstrings: division by 0\n" ));
goto Syntax_Error;
}
break;
case op_callsubr:
{
FT_Int idx;
FT_TRACE4(( " callsubr" ));
idx = (FT_Int)top[0];
if ( idx < 0 || idx >= (FT_Int)decoder->num_subrs )
{
FT_ERROR(( "t1_decoder_parse_charstrings: "
"invalid subrs index\n" ));
goto Syntax_Error;
}
if ( zone - decoder->zones >= T1_MAX_SUBRS_CALLS )
{
FT_ERROR(( "t1_decoder_parse_charstrings: "
"too many nested subrs\n" ));
goto Syntax_Error;
}
zone->cursor = ip; /* save current instruction pointer */
zone++;
/* The Type 1 driver stores subroutines without the seed bytes. */
/* The CID driver stores subroutines with seed bytes. This */
/* case is taken care of when decoder->subrs_len == 0. */
zone->base = decoder->subrs[idx];
if ( decoder->subrs_len )
zone->limit = zone->base + decoder->subrs_len[idx];
else
{
/* We are using subroutines from a CID font. We must adjust */
/* for the seed bytes. */
zone->base += ( decoder->lenIV >= 0 ? decoder->lenIV : 0 );
zone->limit = decoder->subrs[idx + 1];
}
zone->cursor = zone->base;
if ( !zone->base )
{
FT_ERROR(( "t1_decoder_parse_charstrings: "
"invoking empty subrs!\n" ));
goto Syntax_Error;
}
decoder->zone = zone;
ip = zone->base;
limit = zone->limit;
break;
}
case op_pop:
FT_TRACE4(( " pop" ));
/* theoretically, the arguments are already on the stack */
top++;
break;
case op_return:
FT_TRACE4(( " return" ));
if ( zone <= decoder->zones )
{
FT_ERROR(( "t1_decoder_parse_charstrings: unexpected return\n" ));
goto Syntax_Error;
}
zone--;
ip = zone->cursor;
limit = zone->limit;
decoder->zone = zone;
break;
case op_dotsection:
FT_TRACE4(( " dotsection" ));
break;
case op_hstem:
FT_TRACE4(( " hstem" ));
/* record horizontal hint */
if ( hinter )
{
/* top[0] += builder->left_bearing.y; */
hinter->stem( hinter->hints, 1, top );
}
break;
case op_hstem3:
FT_TRACE4(( " hstem3" ));
/* record horizontal counter-controlled hints */
if ( hinter )
hinter->stem3( hinter->hints, 1, top );
break;
case op_vstem:
FT_TRACE4(( " vstem" ));
/* record vertical hint */
if ( hinter )
{
top[0] += orig_x;
hinter->stem( hinter->hints, 0, top );
}
break;
case op_vstem3:
FT_TRACE4(( " vstem3" ));
/* record vertical counter-controlled hints */
if ( hinter )
{
FT_Pos dx = orig_x;
top[0] += dx;
top[2] += dx;
top[4] += dx;
hinter->stem3( hinter->hints, 0, top );
}
break;
case op_setcurrentpoint:
FT_TRACE4(( " setcurrentpoint" ));
FT_ERROR(( "t1_decoder_parse_charstrings: " ));
FT_ERROR(( "unexpected `setcurrentpoint'\n" ));
goto Syntax_Error;
default:
FT_ERROR(( "t1_decoder_parse_charstrings: "
"unhandled opcode %d\n", op ));
goto Syntax_Error;
}
decoder->top = top;
} /* general operator processing */
} /* while ip < limit */
FT_TRACE4(( "..end..\n\n" ));
Fail:
return error;
Syntax_Error:
return PSaux_Err_Syntax_Error;
Stack_Underflow:
return PSaux_Err_Stack_Underflow;
}
static FT_Error
af_loader_load_g( AF_Loader loader,
AF_Scaler scaler,
FT_UInt glyph_index,
FT_Int32 load_flags,
FT_UInt depth )
{
FT_Error error = 0;
FT_Face face = loader->face;
FT_GlyphLoader gloader = loader->gloader;
AF_ScriptMetrics metrics = loader->metrics;
AF_GlyphHints hints = &loader->hints;
FT_GlyphSlot slot = face->glyph;
FT_Slot_Internal internal = slot->internal;
error = FT_Load_Glyph( face, glyph_index, load_flags );
if ( error )
goto Exit;
loader->transformed = internal->glyph_transformed;
if ( loader->transformed )
{
FT_Matrix inverse;
loader->trans_matrix = internal->glyph_matrix;
loader->trans_delta = internal->glyph_delta;
inverse = loader->trans_matrix;
FT_Matrix_Invert( &inverse );
FT_Vector_Transform( &loader->trans_delta, &inverse );
}
/* set linear metrics */
slot->linearHoriAdvance = slot->metrics.horiAdvance;
slot->linearVertAdvance = slot->metrics.vertAdvance;
switch ( slot->format )
{
case FT_GLYPH_FORMAT_OUTLINE:
/* translate the loaded glyph when an internal transform
* is needed
*/
if ( loader->transformed )
FT_Outline_Translate( &slot->outline,
loader->trans_delta.x,
loader->trans_delta.y );
/* copy the outline points in the loader's current */
/* extra points which is used to keep original glyph coordinates */
error = FT_GlyphLoader_CheckPoints( gloader,
slot->outline.n_points + 4,
slot->outline.n_contours );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.outline.points,
slot->outline.points,
slot->outline.n_points );
FT_ARRAY_COPY( gloader->current.extra_points,
slot->outline.points,
slot->outline.n_points );
FT_ARRAY_COPY( gloader->current.outline.contours,
slot->outline.contours,
slot->outline.n_contours );
FT_ARRAY_COPY( gloader->current.outline.tags,
slot->outline.tags,
slot->outline.n_points );
gloader->current.outline.n_points = slot->outline.n_points;
gloader->current.outline.n_contours = slot->outline.n_contours;
/* compute original horizontal phantom points (and ignore */
/* vertical ones) */
loader->pp1.x = hints->x_delta;
loader->pp1.y = hints->y_delta;
loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance,
hints->x_scale ) + hints->x_delta;
loader->pp2.y = hints->y_delta;
/* be sure to check for spacing glyphs */
if ( slot->outline.n_points == 0 )
goto Hint_Metrics;
/* now load the slot image into the auto-outline and run the */
/* automatic hinting process */
metrics->clazz->script_hints_apply( hints,
&gloader->current.outline,
metrics );
/* we now need to hint the metrics according to the change in */
/* width/positioning that occured during the hinting process */
{
FT_Pos old_advance, old_rsb, old_lsb, new_lsb;
FT_Pos pp1x_uh, pp2x_uh;
AF_AxisHints axis = &hints->axis[ AF_DIMENSION_HORZ ];
AF_Edge edge1 = axis->edges; /* leftmost edge */
AF_Edge edge2 = edge1 +
axis->num_edges - 1; /* rightmost edge */
if ( edge2 > edge1 )
{
old_advance = loader->pp2.x;
old_rsb = old_advance - edge2->opos;
old_lsb = edge1->opos;
new_lsb = edge1->pos;
/* remember unhinted values to later account */
/* for rounding errors */
pp1x_uh = new_lsb - old_lsb;
pp2x_uh = edge2->pos + old_rsb;
/* prefer too much space over too little space */
/* for very small sizes */
if ( old_lsb < 24 )
pp1x_uh -= 5;
if ( old_rsb < 24 )
pp2x_uh += 5;
loader->pp1.x = FT_PIX_ROUND( pp1x_uh );
loader->pp2.x = FT_PIX_ROUND( pp2x_uh );
slot->lsb_delta = loader->pp1.x - pp1x_uh;
slot->rsb_delta = loader->pp2.x - pp2x_uh;
#if 0
/* try to fix certain bad advance computations */
if ( loader->pp2.x + loader->pp1.x == edge2->pos && old_rsb > 4 )
loader->pp2.x += 64;
#endif
}
else
{
loader->pp1.x = FT_PIX_ROUND( loader->pp1.x );
loader->pp2.x = FT_PIX_ROUND( loader->pp2.x );
}
}
/* good, we simply add the glyph to our loader's base */
FT_GlyphLoader_Add( gloader );
break;
case FT_GLYPH_FORMAT_COMPOSITE:
{
FT_UInt nn, num_subglyphs = slot->num_subglyphs;
FT_UInt num_base_subgs, start_point;
FT_SubGlyph subglyph;
start_point = gloader->base.outline.n_points;
/* first of all, copy the subglyph descriptors in the glyph loader */
error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs );
if ( error )
goto Exit;
FT_ARRAY_COPY( gloader->current.subglyphs,
slot->subglyphs,
num_subglyphs );
gloader->current.num_subglyphs = num_subglyphs;
num_base_subgs = gloader->base.num_subglyphs;
/* now, read each subglyph independently */
for ( nn = 0; nn < num_subglyphs; nn++ )
{
FT_Vector pp1, pp2;
FT_Pos x, y;
FT_UInt num_points, num_new_points, num_base_points;
/* gloader.current.subglyphs can change during glyph loading due */
/* to re-allocation -- we must recompute the current subglyph on */
/* each iteration */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
pp1 = loader->pp1;
pp2 = loader->pp2;
num_base_points = gloader->base.outline.n_points;
error = af_loader_load_g( loader, scaler, subglyph->index,
load_flags, depth + 1 );
if ( error )
goto Exit;
/* recompute subglyph pointer */
subglyph = gloader->base.subglyphs + num_base_subgs + nn;
if ( subglyph->flags & FT_SUBGLYPH_FLAG_USE_MY_METRICS )
{
pp1 = loader->pp1;
pp2 = loader->pp2;
}
else
{
loader->pp1 = pp1;
loader->pp2 = pp2;
}
num_points = gloader->base.outline.n_points;
num_new_points = num_points - num_base_points;
/* now perform the transform required for this subglyph */
if ( subglyph->flags & ( FT_SUBGLYPH_FLAG_SCALE |
FT_SUBGLYPH_FLAG_XY_SCALE |
FT_SUBGLYPH_FLAG_2X2 ) )
{
FT_Vector* cur = gloader->base.outline.points +
num_base_points;
FT_Vector* org = gloader->base.extra_points +
num_base_points;
FT_Vector* limit = cur + num_new_points;
for ( ; cur < limit; cur++, org++ )
{
FT_Vector_Transform( cur, &subglyph->transform );
FT_Vector_Transform( org, &subglyph->transform );
}
}
/* apply offset */
if ( !( subglyph->flags & FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ) )
{
FT_Int k = subglyph->arg1;
FT_UInt l = subglyph->arg2;
FT_Vector* p1;
FT_Vector* p2;
if ( start_point + k >= num_base_points ||
l >= (FT_UInt)num_new_points )
{
error = FT_Err_Invalid_Composite;
goto Exit;
}
l += num_base_points;
/* for now, only use the current point coordinates; */
/* we may consider another approach in the near future */
p1 = gloader->base.outline.points + start_point + k;
p2 = gloader->base.outline.points + start_point + l;
x = p1->x - p2->x;
y = p1->y - p2->y;
}
else
{
x = FT_MulFix( subglyph->arg1, hints->x_scale ) + hints->x_delta;
y = FT_MulFix( subglyph->arg2, hints->y_scale ) + hints->y_delta;
x = FT_PIX_ROUND(x);
y = FT_PIX_ROUND(y);
}
{
FT_Outline dummy = gloader->base.outline;
dummy.points += num_base_points;
dummy.n_points = (short)num_new_points;
FT_Outline_Translate( &dummy, x, y );
}
}
}
break;
default:
/* we don't support other formats (yet?) */
error = FT_Err_Unimplemented_Feature;
}
Hint_Metrics:
if ( depth == 0 )
{
FT_BBox bbox;
/* transform the hinted outline if needed */
if ( loader->transformed )
FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix );
/* we must translate our final outline by -pp1.x and compute */
/* the new metrics */
if ( loader->pp1.x )
FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 );
FT_Outline_Get_CBox( &gloader->base.outline, &bbox );
bbox.xMin = FT_PIX_FLOOR( bbox.xMin );
bbox.yMin = FT_PIX_FLOOR( bbox.yMin );
bbox.xMax = FT_PIX_CEIL( bbox.xMax );
bbox.yMax = FT_PIX_CEIL( bbox.yMax );
slot->metrics.width = bbox.xMax - bbox.xMin;
slot->metrics.height = bbox.yMax - bbox.yMin;
slot->metrics.horiBearingX = bbox.xMin;
slot->metrics.horiBearingY = bbox.yMax;
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width */
#if 0
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
x_scale );
#else
/* for mono-width fonts (like Andale, Courier, etc.) we need */
/* to keep the original rounded advance width */
if ( !FT_IS_FIXED_WIDTH( slot->face ) )
slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
else
slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance,
metrics->scaler.x_scale );
#endif
slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance );
/* now copy outline into glyph slot */
FT_GlyphLoader_Rewind( internal->loader );
error = FT_GlyphLoader_CopyPoints( internal->loader, gloader );
if ( error )
goto Exit;
slot->outline = internal->loader->base.outline;
slot->format = FT_GLYPH_FORMAT_OUTLINE;
}
#ifdef DEBUG_HINTER
af_debug_hinter = hinter;
#endif
Exit:
return error;
}