/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_MULTIBUF_Config(NUM_BUFFERS);
//
// Set display driver and color conversion for 1st layer
//
GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS);
}
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
//
// Set user palette data (only required if no fixed palette is used)
//
#if defined(PALETTE)
LCD_SetLUTEx(0, PALETTE);
#endif
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_DEVICE * pDevice;
GUI_PORT_API PortAPI = {0};
CONFIG_FLEXCOLOR Config = {0};
#if (NUM_BUFFERS > 1)
GUI_MULTIBUF_Config(NUM_BUFFERS);
#endif
//
// Set display driver and color conversion for 1st layer
//
pDevice = GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Common display driver configuration
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS * NUM_VSCREENS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS * NUM_VSCREENS);
}
//
// Configuration of GUIDRV_FLEX_COLOR
//
//
// Select hardware interface
//
GUIDRV_FlexColor_SetReadFunc66712_B16(pDevice, GUIDRV_FLEXCOLOR_READ_FUNC_II);
//
// Set controller and operation mode
//
PortAPI.pfWrite16_A0 = LCD_X_Write0_16;
PortAPI.pfWrite16_A1 = LCD_X_Write1_16;
PortAPI.pfWriteM16_A1 = LCD_X_WriteM1_16;
PortAPI.pfReadM16_A1 = LCD_X_ReadM1_16;
GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66712, GUIDRV_FLEXCOLOR_M16C0B16);
//
// Orientation and offset of SEG/COM lines
//
Config.Orientation = DISPLAY_ORIENTATION;
Config.RegEntryMode = 0;
GUIDRV_FlexColor_Config(pDevice, &Config);
#if (USE_TOUCH == 1)
//
// Set orientation of touch screen
//
GUI_TOUCH_SetOrientation(DISPLAY_ORIENTATION);
//
// Calibrate touch screen
//
GUI_TOUCH_Calibrate(GUI_COORD_X, 0, WIDTH - 1, TOUCH_LEFT, TOUCH_RIGHT);
GUI_TOUCH_Calibrate(GUI_COORD_Y, 0, HEIGHT - 1, TOUCH_TOP, TOUCH_BOTTOM);
#endif
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
/********************************************************************************************************/
{
lcd_info.fd = open("/dev/fb0", O_RDWR, 0666);
if (lcd_info.fd < 0) {
GUI_X_ErrorOut("emWin failed to open framebuffer device: \"/dev/fb0\", serious error\n");
/*
* TODO: 出错处理
*/
}
ioctl(lcd_info.fd, FBIOGET_VSCREENINFO, &lcd_info.var);
ioctl(lcd_info.fd, FBIOGET_FSCREENINFO, &lcd_info.fix);
/*
* TODO: 这两个值的设置
*/
COLOR_CONVERSION = GUICC_M565;
DISPLAY_DRIVER = GUIDRV_LIN_16;
}
/********************************************************************************************************/
//
// At first initialize use of multiple buffers on demand
//
#if (NUM_BUFFERS > 1)
GUI_MULTIBUF_Config(NUM_BUFFERS);
#endif
//
// Set display driver and color conversion for 1st layer
//
GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_VIRT, XSIZE_VIRT);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_VIRT, YSIZE_VIRT);
}
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
//
// Set user palette data (only required if no fixed palette is used)
//
#if defined(PALETTE)
LCD_SetLUTEx(0, PALETTE);
#endif
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_MULTIBUF_Config(NUM_BUFFERS);
//
// Set display driver and color conversion for 1st layer
//
guiDevice = GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS);
}
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
#ifdef LCD_DEVFUNC_CONTRADDR
if(guiDevice)
{ void (* pSetControllerAddress) (GUI_DEVICE *, uint32_t reg, uint32_t data);
/* now let's take function for setting controller address */
pSetControllerAddress = (void (*) (GUI_DEVICE *, uint32_t, uint32_t))guiDevice->pDeviceAPI->pfGetDevFunc(&guiDevice, LCD_DEVFUNC_CONTRADDR);
/* and configure addresses - for writing register and data */
pSetControllerAddress(guiDevice, BC_SSD2119_BASE, BC_SSD2119_BASE + 2);
}
#endif
/* example how to disable default controller initialization function */
#ifdef removeit_LCD_DEVFUNC_INITIALIZE
if(guiDevice)
{ void (* pSetFunc) (GUI_DEVICE *, int, void (*)(void));
/* now let's take function for changing functions in driver */
pSetFunc = (void (*) (GUI_DEVICE *, int, void (*)(void)))guiDevice->pDeviceAPI->pfGetDevFunc(&guiDevice, LCD_DEVFUNC_SETFUNC);
/* and replace initialization function. It is possible to remove */
/* initialization function by giving null instead of new function pointer */
pSetFunc(guiDevice, LCD_DEVFUNC_INITIALIZE, (void (*)(void))yourInitFunction);
}
#endif
//
// Set user palette data (only required if no fixed palette is used)
//
#if defined(PALETTE)
LCD_SetLUTEx(0, PALETTE);
#endif
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
GUI_DEVICE * pDevice;
CONFIG_S1D13781 Config;
#ifndef WIN32
GUI_PORT_API PortAPI = {0};
#endif
//
// Initialize multibuffering
//
GUI_MULTIBUF_Config(NUM_BUFFERS);
//
// Setup port routines
//
#ifndef WIN32
PortAPI.pfWriteM8_A1 = _WriteM8_A1;
PortAPI.pfReadM8_A1 = _ReadM8_A1;
PortAPI.pfSetCS = _SetCS;
#endif
//
// Set display driver and color conversion for 1st layer
//
pDevice = GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0); {
//
// Common display driver configuration
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS);
}
//
// Driver configuration
//
#ifndef WIN32
GUIDRV_S1D13781_SetBusSPI(pDevice, &PortAPI);
#endif
Config.BufferOffset = 0;
Config.WriteBufferSize = 320 + 5;
Config.UseLayer = 0;
Config.WaitUntilVNDP = 1;
GUIDRV_S1D13781_Config(pDevice, &Config);
}
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
//
// Initialize multibuffering
//
GUI_MULTIBUF_Config(NUM_BUFFERS);
//
// Set display driver and color conversion for 1st layer
//
GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration
//
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx (0, VXSIZE_PHYS, VYSIZE_PHYS);
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
//
// Set user palette data (only required if no fixed palette is used)
//
#if defined(PALETTE)
LCD_SetLUTEx(0, PALETTE);
#endif
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
//
// At first initialize use of multiple buffers on demand
//
#if (NUM_BUFFERS > 1)
GUI_MULTIBUF_Config(NUM_BUFFERS);
#endif
//
// Set display driver and color conversion for 1st layer
//
GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
//
// Display driver configuration, required for Lin-driver
//
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, YSIZE_PHYS, XSIZE_PHYS);
LCD_SetVSizeEx(0, YSIZE_PHYS * NUM_VSCREENS, XSIZE_PHYS);
} else {
LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
LCD_SetVSizeEx(0, XSIZE_PHYS, YSIZE_PHYS * NUM_VSCREENS);
}
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR);
//
// Set user palette data (only required if no fixed palette is used)
//
#if defined(PALETTE)
LCD_SetLUTEx(0, PALETTE);
#endif
//
// Set custom functions for several operations to optimize native processes
//
// LCD_SetDevFunc(0, LCD_DEVFUNC_COPYBUFFER, (void(*)(void))CUSTOM_LCD_CopyBuffer);
// LCD_SetDevFunc(0, LCD_DEVFUNC_COPYRECT, (void(*)(void))CUSTOM_LCD_CopyRect);
// LCD_SetDevFunc(0, LCD_DEVFUNC_FILLRECT, (void(*)(void))CUSTOM_LCD_FillRect);
// LCD_SetDevFunc(0, LCD_DEVFUNC_DRAWBMP_8BPP, (void(*)(void))CUSTOM_LCD_DrawBitmap8bpp);
// LCD_SetDevFunc(0, LCD_DEVFUNC_DRAWBMP_16BPP, (void(*)(void))CUSTOM_LCD_DrawBitmap16bpp);
}
/*********************************************************************
*
* LCD_X_Config
*
* Purpose:
* Called during the initialization process in order to set up the
* display driver configuration.
*
*/
void LCD_X_Config(void) {
/* Enable triple buffering */
GUI_MULTIBUF_Config(NUM_BUFFERS);
/* Set display driver and color conversion */
GUI_DEVICE_CreateAndLink(GUIDRV_LIN_16, GUICC_M565, 0, 0);
/* Set custom callback function for frame copy operation */
LCD_SetDevFunc(0, LCD_DEVFUNC_COPYBUFFER, (void (*)())copyBuffer);
/* Display driver configuration, required for Lin-driver */
if (LCD_GetSwapXY()) {
LCD_SetSizeEx (0, LCD_HEIGHT, LCD_WIDTH);
LCD_SetVSizeEx(0, LCD_HEIGHT, LCD_WIDTH);
} else {
LCD_SetSizeEx (0, LCD_WIDTH, LCD_HEIGHT);
LCD_SetVSizeEx(0, LCD_WIDTH, LCD_HEIGHT);
}
/* Point video memory to start of PSRAM, drawing will start at frame 0 */
LCD_SetVRAMAddrEx(0, (void *)VRAM_ADDR_START);
}
