int test2(int argc, char **argv) {
OFXHOME *oh;
const OH_INSTITUTE_DATA *d;
GWEN_GUI *gui;
int rv;
rv=GWEN_Init();
if (rv) {
fprintf(stderr, "ERROR: Unable to init Gwen.\n");
exit(2);
}
GWEN_Logger_SetLevel(AQBANKING_LOGDOMAIN, GWEN_LoggerLevel_Info);
GWEN_Logger_SetLevel(AQOFXCONNECT_LOGDOMAIN, GWEN_LoggerLevel_Info);
GWEN_Logger_SetLevel(GWEN_LOGDOMAIN, GWEN_LoggerLevel_Debug);
gui=GWEN_Gui_CGui_new();
GWEN_Gui_SetGui(gui);
oh=OfxHome_new("/tmp/ofx");
d=OfxHome_GetData(oh, 542);
if (d==NULL) {
fprintf(stderr, "No data...\n");
return 2;
}
OfxHome_free(oh);
return 0;
}
int main(int argc, char **argv)
{
int errs=0;
GWEN_GUI *gui;
gui=GWEN_Gui_CGui_new();
GWEN_Gui_SetCheckCertFn(gui, checkCert);
GWEN_Gui_SetGui(gui);
if (check_db())
errs++;
#ifdef GWENHYWFAR_SKIP_NETWORK_CHECKS
fprintf(stderr, "Skipping all checks that assume available network connectivity\n"
"Run ./configure without --disable-network-checks to enable the skipped checks\n");
#else
if (check_syncio_tls())
errs++;
if (check_syncio_http())
errs++;
if (check_syncio_https())
errs++;
#endif
if (errs)
return 2;
return 0;
}
int test1(int argc, char **argv) {
GWEN_GUI *gui;
int rv;
GWEN_DIALOG *dlg;
rv=GWEN_Init();
if (rv) {
DBG_ERROR_ERR(0, rv);
return 2;
}
GWEN_Logger_SetLevel(0, GWEN_LoggerLevel_Info);
gtk_set_locale ();
gtk_init (&argc, &argv);
/* create GUI */
gui=Gtk2_Gui_new();
GWEN_Gui_SetGui(gui);
dlg=Dlg_Test1_new();
if (dlg==NULL) {
fprintf(stderr, "Could not create dialog.\n");
return 2;
}
rv=GWEN_Gui_ExecDialog(dlg, 0);
fprintf(stderr, "Result: %d\n", rv);
return 0;
}
static void
register_callbacks(GncGWENGui *gui)
{
GWEN_GUI *gwen_gui;
g_return_if_fail(gui && !gui->gwen_gui);
ENTER("gui=%p", gui);
gui->gwen_gui = gwen_gui = GWEN_Gui_new();
GWEN_Gui_SetMessageBoxFn(gwen_gui, messagebox_cb);
GWEN_Gui_SetInputBoxFn(gwen_gui, inputbox_cb);
GWEN_Gui_SetShowBoxFn(gwen_gui, showbox_cb);
GWEN_Gui_SetHideBoxFn(gwen_gui, hidebox_cb);
GWEN_Gui_SetProgressStartFn(gwen_gui, progress_start_cb);
GWEN_Gui_SetProgressAdvanceFn(gwen_gui, progress_advance_cb);
GWEN_Gui_SetProgressLogFn(gwen_gui, progress_log_cb);
GWEN_Gui_SetProgressEndFn(gwen_gui, progress_end_cb);
GWEN_Gui_SetGetPasswordFn(gwen_gui, getpassword_cb);
GWEN_Gui_SetSetPasswordStatusFn(gwen_gui, setpasswordstatus_cb);
GWEN_Gui_SetLogHookFn(gwen_gui, loghook_cb);
gui->builtin_checkcert = GWEN_Gui_SetCheckCertFn(gwen_gui, checkcert_cb);
GWEN_Gui_SetGui(gwen_gui);
SETDATA_GUI(gwen_gui, gui);
LEAVE(" ");
}
void
gnc_GWEN_Gui_shutdown(void)
{
GncGWENGui *gui = full_gui;
ENTER(" ");
if (log_gwen_gui)
{
GWEN_Gui_free(log_gwen_gui);
log_gwen_gui = NULL;
}
GWEN_Gui_SetGui(NULL);
if (!gui)
return;
gui->parent = NULL;
reset_dialog(gui);
if (gui->passwords)
g_hash_table_destroy(gui->passwords);
if (gui->showbox_hash)
g_hash_table_destroy(gui->showbox_hash);
if (gui->permanently_accepted_certs)
GWEN_DB_Group_free(gui->permanently_accepted_certs);
if (gui->accepted_certs)
g_hash_table_destroy(gui->accepted_certs);
gtk_widget_destroy(gui->dialog);
g_free(gui);
full_gui = NULL;
LEAVE(" ");
}
int test2(int argc, char **argv) {
int rv;
uint32_t id1;
uint32_t id2;
uint64_t i1;
uint64_t i2;
GWEN_GUI *gui;
gtk_set_locale ();
gtk_init (&argc, &argv);
gui=Gtk2_Gui_new();
GWEN_Gui_SetGui(gui);
id1=GWEN_Gui_ProgressStart(GWEN_GUI_PROGRESS_SHOW_LOG |
GWEN_GUI_PROGRESS_SHOW_ABORT |
GWEN_GUI_PROGRESS_KEEP_OPEN,
"Progress-Title",
"<html>"
"<p><b>This</b> is an example <i>text</i>..</p>"
"<p>As you can see <font color=red>colors</font> can "
"be used.</p>"
"</html>",
10,
0);
for (i1=1; i1<=10; i1++) {
char numbuf[128];
snprintf(numbuf, sizeof(numbuf)-1, "Step %d\n", (int)i1);
GWEN_Gui_ProgressLog(id1, GWEN_LoggerLevel_Notice, numbuf);
id2=GWEN_Gui_ProgressStart(GWEN_GUI_PROGRESS_SHOW_LOG |
GWEN_GUI_PROGRESS_DELAY |
GWEN_GUI_PROGRESS_SHOW_ABORT,
"2nd progress",
"Starting 2nd progress...",
10,
id1);
for (i2=1; i2<=10; i2++) {
sleep(1);
fprintf(stderr, "Advancing %d/%d\n", (int)i1, (int)i2);
rv=GWEN_Gui_ProgressAdvance(id2, i2);
if (rv==GWEN_ERROR_USER_ABORTED) {
fprintf(stderr, "Aborted by user (2)\n");
break;
}
}
GWEN_Gui_ProgressEnd(id2);
rv=GWEN_Gui_ProgressAdvance(id1, i1);
if (rv==GWEN_ERROR_USER_ABORTED) {
fprintf(stderr, "Aborted by user (1)\n");
break;
}
}
GWEN_Gui_ProgressEnd(id1);
return 0;
}
void gnc_GWEN_Gui_log_init(void)
{
if (!gwen_gui)
{
gwen_gui = Gtk2_Gui_new();
GWEN_Gui_SetGui(gwen_gui);
}
}
void gnc_GWEN_Gui_shutdown(void)
{
if (gwen_gui)
{
GWEN_Gui_free(gwen_gui);
gwen_gui = NULL;
GWEN_Gui_SetGui(NULL);
}
}
int AB_create(aqbanking_Account *acct = NULL) {
int rv = 0;
//Initialisierungen GWEN
if (acct == NULL) {
GWEN_Gui_SetGui(aqh->getCInterface());
} else {
GWEN_Gui_SetGui(acct->aqh->getCInterface());
}
// Initialisierungen AB
if (acct == NULL) {
ab = AB_Banking_new("python-aqbanking", 0, AB_BANKING_EXTENSION_NONE);
rv = AB_Banking_Init(ab);
} else {
acct->ab = AB_Banking_new("python-aqbanking", 0, AB_BANKING_EXTENSION_NONE);
rv = AB_Banking_Init(acct->ab);
}
if (rv) {
PyErr_SetObject(AqBankingInitializeError, PyUnicode_FromFormat("Could not initialize (%d).", rv));
return 2;
}
if (acct == NULL) {
rv = AB_Banking_OnlineInit(ab);
} else {
rv = AB_Banking_OnlineInit(acct->ab);
}
if (rv) {
PyErr_SetObject(AqBankingInitializeError, PyUnicode_FromFormat("Could not do online initialize (%d).", rv));
return 2;
}
//Setzen der Call-backs
/*GWEN_Gui_SetProgressLogFn(this->gui, zProgressLog);
GWEN_Gui_SetCheckCertFn(this->gui, zCheckCert);
GWEN_Gui_SetMessageBoxFn(this->gui, zMessageBox);
GWEN_Gui_SetGetPasswordFn(this->gui, zPasswordFn);*/
return 0;
}
void
gnc_GWEN_Gui_log_init(void)
{
if (!log_gwen_gui)
{
log_gwen_gui = GWEN_Gui_new();
/* Always use our own logging */
GWEN_Gui_SetLogHookFn(log_gwen_gui, loghook_cb);
/* Keep a reference so that the GWEN_GUI survives a GUI switch */
GWEN_Gui_Attach(log_gwen_gui);
}
GWEN_Gui_SetGui(log_gwen_gui);
}
void
gnc_GWEN_Gui_log_init(void)
{
if (!log_gwen_gui)
{
log_gwen_gui =
#ifdef USING_GWENHYWFAR_GTK2_GUI
Gtk2_Gui_new()
#else
GWEN_Gui_new()
#endif
;
/* Always use our own logging */
GWEN_Gui_SetLogHookFn(log_gwen_gui, loghook_cb);
/* Keep a reference so that the GWEN_GUI survives a GUI switch */
GWEN_Gui_Attach(log_gwen_gui);
}
GWEN_Gui_SetGui(log_gwen_gui);
}
int main(int argc, char **argv) {
GWEN_DB_NODE *db;
const char *cmd;
int rv;
AB_BANKING *ab;
GWEN_GUI *gui;
int nonInteractive=0;
int acceptValidCerts=0;
const char *pinFile;
const char *cfgDir;
const char *s;
const GWEN_ARGS args[]={
{
GWEN_ARGS_FLAGS_HAS_ARGUMENT, /* flags */
GWEN_ArgsType_Char, /* type */
"cfgdir", /* name */
0, /* minnum */
1, /* maxnum */
"D", /* short option */
"cfgdir", /* long option */
I18S("Specify the configuration folder"),
I18S("Specify the configuration folder")
},
{
0, /* flags */
GWEN_ArgsType_Int, /* type */
"nonInteractive", /* name */
0, /* minnum */
1, /* maxnum */
"n", /* short option */
"noninteractive", /* long option */
"Select non-interactive mode",/* short description */
"Select non-interactive mode.\n" /* long description */
"This automatically returns a confirmative answer to any non-critical\n"
"message."
},
{
0, /* flags */
GWEN_ArgsType_Int, /* type */
"acceptValidCerts", /* name */
0, /* minnum */
1, /* maxnum */
"A", /* short option */
"acceptvalidcerts", /* long option */
"Automatically accept all valid TLS certificate",
"Automatically accept all valid TLS certificate"
},
{
GWEN_ARGS_FLAGS_HAS_ARGUMENT, /* flags */
GWEN_ArgsType_Char, /* type */
"charset", /* name */
0, /* minnum */
1, /* maxnum */
0, /* short option */
"charset", /* long option */
"Specify the output character set", /* short description */
"Specify the output character set" /* long description */
},
{
GWEN_ARGS_FLAGS_HAS_ARGUMENT, /* flags */
GWEN_ArgsType_Char, /* type */
"pinfile", /* name */
0, /* minnum */
1, /* maxnum */
"P", /* short option */
"pinfile", /* long option */
"Specify the PIN file", /* short description */
"Specify the PIN file" /* long description */
},
{
GWEN_ARGS_FLAGS_HELP | GWEN_ARGS_FLAGS_LAST, /* flags */
GWEN_ArgsType_Int, /* type */
"help", /* name */
0, /* minnum */
0, /* maxnum */
"h", /* short option */
"help",
I18S("Show this help screen. For help on commands, "
"run aqbanking-cli <COMMAND> --help."),
I18S("Show this help screen. For help on commands, run aqbanking-cli <COMMAND> --help.")
}
};
rv=GWEN_Init();
if (rv) {
fprintf(stderr, "ERROR: Unable to init Gwen.\n");
exit(2);
}
GWEN_Logger_Open(0, "aqbanking-cli", 0,
GWEN_LoggerType_Console,
GWEN_LoggerFacility_User);
GWEN_Logger_SetLevel(0, GWEN_LoggerLevel_Warning);
rv=GWEN_I18N_BindTextDomain_Dir(PACKAGE, LOCALEDIR);
if (rv) {
DBG_ERROR(0, "Could not bind textdomain (%d)", rv);
}
else {
rv=GWEN_I18N_BindTextDomain_Codeset(PACKAGE, "UTF-8");
if (rv) {
DBG_ERROR(0, "Could not set codeset (%d)", rv);
}
}
db=GWEN_DB_Group_new("arguments");
rv=GWEN_Args_Check(argc, argv, 1,
GWEN_ARGS_MODE_ALLOW_FREEPARAM |
GWEN_ARGS_MODE_STOP_AT_FREEPARAM,
args,
db);
if (rv==GWEN_ARGS_RESULT_ERROR) {
fprintf(stderr, "ERROR: Could not parse arguments main\n");
GWEN_DB_Group_free(db);
return 1;
}
else if (rv==GWEN_ARGS_RESULT_HELP) {
GWEN_BUFFER *ubuf;
ubuf=GWEN_Buffer_new(0, 1024, 0, 1);
GWEN_Buffer_AppendString(ubuf, I18N("This is version "));
GWEN_Buffer_AppendString(ubuf, AQHBCI_VERSION_STRING "\n");
GWEN_Buffer_AppendString(ubuf,
I18N("Usage: "));
GWEN_Buffer_AppendString(ubuf, argv[0]);
GWEN_Buffer_AppendString(ubuf,
I18N(" [GLOBAL OPTIONS] COMMAND "
"[LOCAL OPTIONS]\n"));
GWEN_Buffer_AppendString(ubuf,
I18N("\nGlobal Options:\n"));
if (GWEN_Args_Usage(args, ubuf, GWEN_ArgsOutType_Txt)) {
fprintf(stderr, "ERROR: Could not create help string\n");
GWEN_DB_Group_free(db);
return 1;
}
GWEN_Buffer_AppendString(ubuf,
I18N("\nCommands:\n"));
cmdAddHelpStr(ubuf, "senddtazv",
I18N("Sends a DTAZV file to the bank"));
cmdAddHelpStr(ubuf, "listaccs",
I18N("Prints the list of accounts"));
cmdAddHelpStr(ubuf, "listbal",
I18N("Export balances from a context file."));
cmdAddHelpStr(ubuf, "listtrans",
I18N("Export transactions from a context file."));
cmdAddHelpStr(ubuf, "listtransfers",
I18N("Export transactions from a context file which match certain status."));
cmdAddHelpStr(ubuf, "request",
I18N("Requests transactions, balances, standing orders etc."));
cmdAddHelpStr(ubuf, "chkacc",
I18N("Check a combination of bank id and account number"));
cmdAddHelpStr(ubuf, "chkiban",
I18N("Check an IBAN"));
cmdAddHelpStr(ubuf, "import",
I18N("Import a file into an import context file"));
cmdAddHelpStr(ubuf, "transfer",
I18N("Issue a single transfer (data from command line)"));
cmdAddHelpStr(ubuf, "transfers",
I18N("Issue a number of transfers (data from a file)"));
cmdAddHelpStr(ubuf, "sepatransfer",
I18N("Issue a single SEPA transfer (data from command line)"));
cmdAddHelpStr(ubuf, "sepatransfers",
I18N("Issue a number of SEPA transfers (data from a file)"));
cmdAddHelpStr(ubuf, "debitnote",
I18N("Issue a single debit note (data from command line)"));
cmdAddHelpStr(ubuf, "debitnotes",
I18N("Issue a number of debit notes (data from a file)"));
cmdAddHelpStr(ubuf, "sepadebitnote",
I18N("Issue a single SEPA debit note (data from command line)"));
cmdAddHelpStr(ubuf, "sepaflashdebitnote",
I18N("Issue a single flash SEPA debit note COR1 (data from command line)"));
cmdAddHelpStr(ubuf, "sepadebitnotes",
I18N("Issue a number of SEPA debit notes (data from a file)"));
cmdAddHelpStr(ubuf, "addtrans",
I18N("Add a transfer to an existing import context file"));
cmdAddHelpStr(ubuf, "addsepadebitnote",
I18N("Add a SEPA debit note to an existing import context file"));
cmdAddHelpStr(ubuf, "sepasto",
I18N("Manage SEPA standing orders"));
cmdAddHelpStr(ubuf, "fillgaps",
I18N("Fill gaps in an import context file from configuration settings"));
cmdAddHelpStr(ubuf, "updateconf",
I18N("Update configuration from previous AqBanking versions"));
cmdAddHelpStr(ubuf, "listprofiles",
I18N("Print existing profiles"));
cmdAddHelpStr(ubuf, "versions",
I18N("Print the program and library versions"));
GWEN_Buffer_AppendString(ubuf, "\n");
fprintf(stderr, "%s\n", GWEN_Buffer_GetStart(ubuf));
GWEN_Buffer_free(ubuf);
GWEN_DB_Group_free(db);
return 0;
}
if (rv) {
argc-=rv-1;
argv+=rv-1;
}
nonInteractive=GWEN_DB_GetIntValue(db, "nonInteractive", 0, 0);
acceptValidCerts=GWEN_DB_GetIntValue(db, "acceptValidCerts", 0, 0);
cfgDir=GWEN_DB_GetCharValue(db, "cfgdir", 0, 0);
cmd=GWEN_DB_GetCharValue(db, "params", 0, 0);
if (!cmd) {
fprintf(stderr, "ERROR: Command needed.\n");
GWEN_DB_Group_free(db);
return 1;
}
gui=GWEN_Gui_CGui_new();
s=GWEN_DB_GetCharValue(db, "charset", 0, NULL);
if (s && *s)
GWEN_Gui_SetCharSet(gui, s);
if (nonInteractive)
GWEN_Gui_AddFlags(gui, GWEN_GUI_FLAGS_NONINTERACTIVE);
else
GWEN_Gui_SubFlags(gui, GWEN_GUI_FLAGS_NONINTERACTIVE);
if (acceptValidCerts)
GWEN_Gui_AddFlags(gui, GWEN_GUI_FLAGS_ACCEPTVALIDCERTS);
else
GWEN_Gui_SubFlags(gui, GWEN_GUI_FLAGS_ACCEPTVALIDCERTS);
pinFile=GWEN_DB_GetCharValue(db, "pinFile", 0, NULL);
if (pinFile) {
GWEN_DB_NODE *dbPins;
dbPins=GWEN_DB_Group_new("pins");
if (GWEN_DB_ReadFile(dbPins, pinFile,
GWEN_DB_FLAGS_DEFAULT |
GWEN_PATH_FLAGS_CREATE_GROUP)) {
fprintf(stderr, "Error reading pinfile \"%s\"\n", pinFile);
GWEN_DB_Group_free(dbPins);
GWEN_DB_Group_free(db);
return 2;
}
GWEN_Gui_SetPasswordDb(gui, dbPins, 1);
}
GWEN_Gui_SetGui(gui);
ab=AB_Banking_new("aqbanking-cli", cfgDir, 0);
AB_Gui_Extend(gui, ab);
if (strcasecmp(cmd, "senddtazv")==0) {
rv=sendDtazv(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "listaccs")==0) {
rv=listAccs(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "listbal")==0) {
rv=listBal(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "listtrans")==0) {
rv=listTrans(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "listtransfers")==0) {
rv=listTransfers(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "request")==0) {
rv=request(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "chkacc")==0) {
rv=chkAcc(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "chkiban")==0) {
rv=chkIban(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "import")==0) {
rv=import(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "transfer")==0) {
rv=transfer(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "transfers")==0) {
rv=transfers(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "sepatransfer")==0) {
rv=sepaTransfer(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "sepatransfers")==0) {
rv=sepaMultiJobs(ab, db, argc, argv, AQBANKING_TOOL_SEPA_TRANSFERS);
}
else if (strcasecmp(cmd, "debitnote")==0) {
rv=debitNote(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "debitnotes")==0) {
rv=debitNotes(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "sepadebitnote")==0) {
rv=sepaDebitNote(ab, db, argc, argv, 0);
}
else if (strcasecmp(cmd, "sepaFlashDebitNote")==0) {
rv=sepaDebitNote(ab, db, argc, argv, 1);
}
else if (strcasecmp(cmd, "sepadebitnotes")==0) {
rv=sepaMultiJobs(ab, db, argc, argv, AQBANKING_TOOL_SEPA_DEBITNOTES);
}
else if (strcasecmp(cmd, "addtrans")==0) {
rv=addTransaction(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "addsepadebitnote")==0) {
rv=addSepaDebitNote(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "sepasto")==0) {
rv=sepaRecurTransfer(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "fillgaps")==0) {
rv=fillGaps(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "updateconf")==0) {
rv=updateConf(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "listprofiles")==0) {
rv=listProfiles(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "versions")==0) {
rv=versions(ab, db, argc, argv);
}
else {
fprintf(stderr, "ERROR: Unknown command \"%s\".\n", cmd);
rv=1;
}
GWEN_DB_Group_free(db);
return rv;
}
int main(int argc, char **argv)
{
AB_BANKING *ab;
AB_ACCOUNT_SPEC_LIST *accs=NULL;
int rv;
GWEN_GUI *gui;
gui=GWEN_Gui_CGui_new();
GWEN_Gui_SetGui(gui);
ab=AB_Banking_new("tutorial2", 0, 0);
/* Initialize AqBanking */
rv=AB_Banking_Init(ab);
if (rv) {
fprintf(stderr, "Error on init (%d: %s)\n", rv, GWEN_Error_SimpleToString(rv));;
return 2;
}
fprintf(stderr, "AqBanking successfully initialized.\n");
/* Get a list of accounts which are known to AqBanking.
* We own the list returned, so in order to avoid memory
* leaks we need to free it afterwards.
*
* The rest of this tutorial shows how lists are generally used by
* AqBanking.
*/
rv=AB_Banking_GetAccountSpecList(ab, &accs);
if (rv<0) {
fprintf(stderr, "Unable to get the list of accounts (%d: %s)\n", rv, GWEN_Error_SimpleToString(rv));
return 3;
}
else {
AB_ACCOUNT_SPEC *as;
/* return the first entry of the account spec list */
as=AB_AccountSpec_List_First(accs);
while (as) {
fprintf(stderr,
"Account: %s %s (%s) [%s]\n",
AB_AccountSpec_GetBankCode(as),
AB_AccountSpec_GetAccountNumber(as),
AB_AccountSpec_GetAccountName(as),
/* every account is assigned to a backend (sometimes called provider)
* which actually performs online banking tasks. We get a pointer
* to that provider/backend with this call to show its name in our
* example.*/
AB_AccountSpec_GetBackendName(as));
/* return the next entry of the account spec list */
as=AB_AccountSpec_List_Next(as);
}
/* free the list to avoid memory leaks */
AB_AccountSpec_List_free(accs);
}
/* deinitialize AqBanking */
rv=AB_Banking_Fini(ab);
if (rv) {
fprintf(stderr, "ERROR: Error on deinit (%d)\n", rv);
return 3;
}
/* free AqBanking object */
AB_Banking_free(ab);
return 0;
}
int main(int argc, char **argv)
{
GWEN_GUI *gui;
AB_BANKING *ab;
AB_ACCOUNT_SPEC_LIST *accs=NULL;
AB_ACCOUNT_SPEC *as;
AB_IMEXPORTER_ACCOUNTINFO *ai;
gui=GWEN_Gui_CGui_new();
GWEN_Gui_SetGui(gui);
ab=AB_Banking_new("tutorial3", 0, 0);
AB_Banking_Init(ab);
fprintf(stderr, "AqBanking successfully initialized.\n");
/* get the list of known accounts */
AB_Banking_GetAccountSpecList(ab, &accs);
/* find a matching account within the given list */
as=AB_AccountSpec_List_FindFirst(accs,
"aqhbci", /* backendName */
"de", /* country */
"28*", /* bankId bank */
"*", /* accountNumber */
"*", /* subAccountId */
"*", /* iban */
"*", /* currency */
AB_AccountType_Unknown); /* ty */
if (as) {
AB_TRANSACTION_LIST2 *cmdList;
AB_TRANSACTION *t;
AB_IMEXPORTER_CONTEXT *ctx;
cmdList=AB_Transaction_List2_new();
t=AB_Transaction_new();
AB_Transaction_SetCommand(t, AB_Transaction_CommandGetTransactions);
AB_Transaction_SetUniqueAccountId(t, AB_AccountSpec_GetUniqueId(as));
AB_Transaction_List2_PushBack(cmdList, t);
ctx=AB_ImExporterContext_new();
AB_Banking_SendCommands(ab, cmdList, ctx);
ai=AB_ImExporterContext_GetFirstAccountInfo(ctx);
while (ai) {
const AB_TRANSACTION *t;
t=AB_ImExporterAccountInfo_GetFirstTransaction(ai, 0, 0);
while (t) {
const AB_VALUE *v;
v=AB_Transaction_GetValue(t);
if (v) {
const char *purpose;
purpose=AB_Transaction_GetPurpose(t);
fprintf(stderr, " %-32s (%.2f %s)\n",
purpose,
AB_Value_GetValueAsDouble(v),
AB_Value_GetCurrency(v));
}
t=AB_Transaction_List_Next(t);
} /* while transactions */
ai=AB_ImExporterAccountInfo_List_Next(ai);
} /* while ai */
AB_ImExporterContext_free(ctx);
} /* if (as) */
AB_Banking_Fini(ab);
AB_Banking_free(ab);
return 0;
}
int main(int argc, char **argv) {
int rv;
GWEN_DB_NODE *db;
const char *s;
LC_CLIENT *cl;
LC_CLIENT_RESULT res;
GWEN_GUI *gui;
int v;
gui=GWEN_Gui_CGui_new();
GWEN_Gui_SetGui(gui);
db=GWEN_DB_Group_new("arguments");
rv=GWEN_Args_Check(argc, argv, 1,
GWEN_ARGS_MODE_ALLOW_FREEPARAM,
prg_args,
db);
if (rv==GWEN_ARGS_RESULT_HELP) {
GWEN_BUFFER *ubuf;
ubuf=GWEN_Buffer_new(0, 256, 0, 1);
if (GWEN_Args_Usage(prg_args, ubuf, GWEN_ArgsOutType_Txt)) {
fprintf(stderr, "Could not generate usage string.\n");
GWEN_Buffer_free(ubuf);
return RETURNVALUE_PARAM;
}
usage(argv[0], GWEN_Buffer_GetStart(ubuf));
GWEN_Buffer_free(ubuf);
return 0;
}
if (rv<1) {
fprintf(stderr, "ERROR: Error in argument list (%d)\n", rv);
return RETURNVALUE_PARAM;
}
v=GWEN_DB_GetIntValue(db, "verbosity", 0, 0);
if (v<2)
GWEN_Gui_AddFlags(gui, GWEN_GUI_FLAGS_NONINTERACTIVE);
/* get command */
s=GWEN_DB_GetCharValue(db, "params", 0, 0);
if (!s) {
fprintf(stderr, "No command given.\n");
GWEN_DB_Group_free(db);
return RETURNVALUE_PARAM;
}
cl=LC_Client_new("kvkcard", PROGRAM_VERSION);
res=LC_Client_Init(cl);
if (res!=LC_Client_ResultOk) {
showError(0, res, "Init");
return RETURNVALUE_SETUP;
}
/* handle command */
if (strcasecmp(s, "read")==0) {
rv=kvkRead(cl, db);
}
else if (strcasecmp(s, "daemon")==0) {
fprintf(stderr, "KVK daemon no longer supported.\n");
return RETURNVALUE_SETUP;
}
else if (strcasecmp(s, "rdvd")==0) {
rv=rdvd(cl, db);
}
else if (strcasecmp(s, "rdpd")==0) {
rv=rdpd(cl, db);
}
else if (strcasecmp(s, "psvd")==0) {
rv=psvd(cl, db);
}
else {
fprintf(stderr, "Unknown command \"%s\"", s);
rv=RETURNVALUE_PARAM;
}
LC_Client_free(cl);
GWEN_DB_Group_free(db);
return 0;
}
int main(int argc, char **argv) {
GWEN_DB_NODE *db;
const char *cmd;
const char *pinFile;
int nonInteractive=0;
const char *s;
int rv;
AB_BANKING *ab;
GWEN_GUI *gui;
const GWEN_ARGS args[]={
{
GWEN_ARGS_FLAGS_HAS_ARGUMENT, /* flags */
GWEN_ArgsType_Char, /* type */
"cfgfile", /* name */
0, /* minnum */
1, /* maxnum */
"C", /* short option */
"cfgfile", /* long option */
"Specify the configuration file", /* short description */
"Specify the configuration file" /* long description */
},
{
GWEN_ARGS_FLAGS_HAS_ARGUMENT, /* flags */
GWEN_ArgsType_Char, /* type */
"pinfile", /* name */
0, /* minnum */
1, /* maxnum */
"P", /* short option */
"pinfile", /* long option */
"Specify the PIN file", /* short description */
"Specify the PIN file" /* long description */
},
{
0, /* flags */
GWEN_ArgsType_Int, /* type */
"nonInteractive", /* name */
0, /* minnum */
1, /* maxnum */
"n", /* short option */
"noninteractive", /* long option */
"Select non-interactive mode",/* short description */
"Select non-interactive mode.\n" /* long description */
"This automatically returns a confirmative answer to any non-critical\n"
"message."
},
{
0,
GWEN_ArgsType_Int,
"verbosity",
0,
10,
"v",
0,
"Increase the verbosity level",
"Increase the verbosity level"
},
{
GWEN_ARGS_FLAGS_HAS_ARGUMENT, /* flags */
GWEN_ArgsType_Char, /* type */
"charset", /* name */
0, /* minnum */
1, /* maxnum */
0, /* short option */
"charset", /* long option */
"Specify the output character set", /* short description */
"Specify the output character set" /* long description */
},
{
GWEN_ARGS_FLAGS_HELP | GWEN_ARGS_FLAGS_LAST, /* flags */
GWEN_ArgsType_Int, /* type */
"help", /* name */
0, /* minnum */
0, /* maxnum */
"h", /* short option */
"help", /* long option */
"Show this help screen", /* short description */
"Show this help screen" /* long description */
}
};
rv=GWEN_Init();
if (rv<0) {
fprintf(stderr, "ERROR: Unable to init GWEN (%d).\n", rv);
return 2;
}
GWEN_Logger_Open("aqpaypal-tool", "aqpaypal-tool", 0,
GWEN_LoggerType_Console,
GWEN_LoggerFacility_User);
GWEN_Logger_SetLevel("aqpaypal-tool", GWEN_LoggerLevel_Warning);
GWEN_Logger_SetLevel(0, GWEN_LoggerLevel_Warning);
db=GWEN_DB_Group_new("arguments");
rv=GWEN_Args_Check(argc, argv, 1,
GWEN_ARGS_MODE_ALLOW_FREEPARAM |
GWEN_ARGS_MODE_STOP_AT_FREEPARAM,
args,
db);
if (rv==GWEN_ARGS_RESULT_ERROR) {
fprintf(stderr, "ERROR: Could not parse arguments main\n");
return -1;
}
else if (rv==GWEN_ARGS_RESULT_HELP) {
GWEN_BUFFER *ubuf;
ubuf=GWEN_Buffer_new(0, 1024, 0, 1);
GWEN_Buffer_AppendString(ubuf,
I18N("Usage: "));
GWEN_Buffer_AppendString(ubuf, argv[0]);
GWEN_Buffer_AppendString(ubuf,
I18N(" [GLOBAL OPTIONS] COMMAND "
"[LOCAL OPTIONS]\n"));
GWEN_Buffer_AppendString(ubuf,
I18N("\nGlobal Options:\n"));
if (GWEN_Args_Usage(args, ubuf, GWEN_ArgsOutType_Txt)) {
fprintf(stderr, "ERROR: Could not create help string\n");
return 1;
}
GWEN_Buffer_AppendString(ubuf,
I18N("\nCommands:\n\n"));
GWEN_Buffer_AppendString(ubuf,
I18N(" listusers:\n"
" blurb "
"file\n\n"));
GWEN_Buffer_AppendString(ubuf,
I18N(" listaccounts:\n"
" blurb "
"file\n\n"));
GWEN_Buffer_AppendString(ubuf,
I18N(" adduser:\n"
" blurb "
"file\n\n"));
GWEN_Buffer_AppendString(ubuf,
I18N(" addaccount:\n"
" blurb "
"file\n\n"));
GWEN_Buffer_AppendString(ubuf,
I18N(" setsecret:\n"
" blurb "
"file\n\n"));
fprintf(stdout, "%s\n", GWEN_Buffer_GetStart(ubuf));
GWEN_Buffer_free(ubuf);
return 0;
}
if (rv) {
argc-=rv-1;
argv+=rv-1;
}
cmd=GWEN_DB_GetCharValue(db, "params", 0, 0);
if (!cmd) {
fprintf(stderr, "ERROR: Command needed.\n");
return 1;
}
gui=GWEN_Gui_CGui_new();
s=GWEN_DB_GetCharValue(db, "charset", 0, "ISO-8859-15");
GWEN_Gui_SetCharSet(gui, s);
nonInteractive=GWEN_DB_GetIntValue(db, "nonInteractive", 0, 0);
if (nonInteractive)
GWEN_Gui_AddFlags(gui, GWEN_GUI_FLAGS_NONINTERACTIVE);
else
GWEN_Gui_SubFlags(gui, GWEN_GUI_FLAGS_NONINTERACTIVE);
pinFile=GWEN_DB_GetCharValue(db, "pinFile", 0, NULL);
if (pinFile) {
GWEN_DB_NODE *dbPins;
dbPins=GWEN_DB_Group_new("pins");
if (GWEN_DB_ReadFile(dbPins, pinFile,
GWEN_DB_FLAGS_DEFAULT |
GWEN_PATH_FLAGS_CREATE_GROUP)) {
fprintf(stderr, "Error reading pinfile \"%s\"\n", pinFile);
return 2;
}
/* set argument "persistent" to one in non-interactive mode */
GWEN_Gui_CGui_SetPasswordDb(gui, dbPins, nonInteractive);
}
GWEN_Gui_SetGui(gui);
ab=AB_Banking_new("aqpaypal-tool",
GWEN_DB_GetCharValue(db, "cfgfile", 0, 0),
0);
AB_Gui_Extend(gui, ab);
if (strcasecmp(cmd, "listusers")==0) {
rv=listUsers(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "listaccounts")==0) {
rv=listAccounts(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "adduser")==0) {
rv=addUser(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "addaccount")==0) {
rv=addAccount(ab, db, argc, argv);
}
else if (strcasecmp(cmd, "setsecrets")==0) {
rv=setSecrets(ab, db, argc, argv);
}
else {
fprintf(stderr, "ERROR: Unknown command \"%s\".\n", cmd);
rv=1;
}
return rv;
}
int main(int argc, char **argv) {
AB_BANKING *ab;
int rv;
GWEN_GUI *gui;
gui=GWEN_Gui_CGui_new();
GWEN_Gui_SetGui(gui);
/* The first argument is the name of the application. This is needed for
* AqBanking to internally store some application-specific settings.
* This name may contain whatever characters you like, it is escaped
* internally before creating file paths or DB groups from it.
*
* The second argument is the folder in which the AqBanking settings are
* stored. You should in most cases provide NULL here which makes AqBanking
* choose the default path ($HOME/.aqbanking).
* If this folder doesn't exist it will be created as soon as AqBanking has
* something to store (in most cases when closing the application).
*/
ab=AB_Banking_new("tutorial1", 0, 0);
/* This function initializes AqBanking. It is only after successfull return
* from this function that any other AqBanking function may be used.
*/
rv=AB_Banking_Init(ab);
if (rv) {
fprintf(stderr, "Error on init (%d)\n", rv);
return 2;
}
/* Initialize the only banking part of AqBanking. This is needed to
* actually perform online banking actions (like retrieving account
* statements etc).
*/
rv=AB_Banking_OnlineInit(ab);
if (rv) {
fprintf(stderr, "Error on onlineinit (%d)\n", rv);
return 2;
}
fprintf(stderr, "AqBanking successfully initialized.\n");
/* deinit the online banking part of AqBanking */
rv=AB_Banking_OnlineFini(ab);
if (rv) {
fprintf(stderr, "ERROR: Error on deinit (%d)\n", rv);
return 3;
}
/* You must always call this function before exiting, because only then
* AqBanking's settings are written.
* After this function has been called no other function except
* AB_Banking_free() or AB_Banking_Init() may be called.
*/
rv=AB_Banking_Fini(ab);
if (rv) {
fprintf(stderr, "ERROR: Error on deinit (%d)\n", rv);
return 3;
}
/* The AqBanking instance you created at the beginning must always be
* destroyed using this function to avoid memory leaks.
*/
AB_Banking_free(ab);
return 0;
}
int main(int argc, char **argv) {
GWEN_DB_NODE *db;
const char *cmd;
int rv;
int err;
GWEN_GUI *gui;
const GWEN_ARGS args[]={
{
GWEN_ARGS_FLAGS_HELP | GWEN_ARGS_FLAGS_LAST, /* flags */
GWEN_ArgsType_Int, /* type */
"help", /* name */
0, /* minnum */
0, /* maxnum */
"h", /* short option */
"help", /* long option */
"Show this help screen", /* short description */
"Show this help screen" /* long description */
}
};
err=GWEN_Init();
if (err) {
fprintf(stderr, "Could not initialize Gwenhywfar.\n");
return 2;
}
gui=GWEN_Gui_CGui_new();
GWEN_Gui_SetGui(gui);
GWEN_Logger_Open(GSA_LOGDOMAIN, "gsa", 0,
GWEN_LoggerType_Console,
GWEN_LoggerFacility_User);
GWEN_Logger_SetLevel(GSA_LOGDOMAIN, GWEN_LoggerLevel_Warning);
GWEN_Logger_SetLevel(0, GWEN_LoggerLevel_Warning);
#ifdef GSA_IS_EXPERIMENTAL
fprintf(stderr, "\n");
fprintf(stderr, "\n");
fprintf(stderr, "=================== WARNING ===================\n");
fprintf(stderr, "This tool is still EXPERIMENTAL !!!\n");
fprintf(stderr, "Please DON'T USE it with your data files !\n");
fprintf(stderr, "===============================================\n");
fprintf(stderr, "\n");
fprintf(stderr, "\n");
#endif
db=GWEN_DB_Group_new("arguments");
rv=GWEN_Args_Check(argc, argv, 1,
GWEN_ARGS_MODE_ALLOW_FREEPARAM |
GWEN_ARGS_MODE_STOP_AT_FREEPARAM,
args,
db);
if (rv==GWEN_ARGS_RESULT_ERROR) {
fprintf(stderr, "ERROR: Could not parse arguments main\n");
return -1;
}
else if (rv==GWEN_ARGS_RESULT_HELP) {
GWEN_BUFFER *ubuf;
ubuf=GWEN_Buffer_new(0, 1024, 0, 1);
GWEN_Buffer_AppendString(ubuf,
I18N("GWEN's Simple Archiver"));
GWEN_Buffer_AppendString(ubuf,
" (Gwenhywfar v" GWENHYWFAR_VERSION_FULL_STRING ")\n");
GWEN_Buffer_AppendString(ubuf,
I18N("Usage: "));
GWEN_Buffer_AppendString(ubuf, argv[0]);
GWEN_Buffer_AppendString(ubuf,
I18N(" [GLOBAL OPTIONS] COMMAND "
"[LOCAL OPTIONS]\n"));
GWEN_Buffer_AppendString(ubuf,
I18N("\nGlobal Options:\n"));
if (GWEN_Args_Usage(args, ubuf, GWEN_ArgsOutType_Txt)) {
fprintf(stderr, "ERROR: Could not create help string\n");
return 1;
}
GWEN_Buffer_AppendString(ubuf,
I18N("\nCommands:\n\n"));
GWEN_Buffer_AppendString(ubuf,
I18N(" create:\n"
" This command creates an archive file"
"\n\n"));
GWEN_Buffer_AppendString(ubuf,
I18N(" add:\n"
" Add files and folders to an archive file\n\n"));
GWEN_Buffer_AppendString(ubuf,
I18N(" list:\n"
" List files and folders in an archive file\n\n"));
GWEN_Buffer_AppendString(ubuf,
I18N(" check:\n"
" Check integrity of files and folders in an archive file\n\n"));
fprintf(stderr, "%s\n", GWEN_Buffer_GetStart(ubuf));
GWEN_Buffer_free(ubuf);
return 0;
}
if (rv) {
argc-=rv-1;
argv+=rv-1;
}
cmd=GWEN_DB_GetCharValue(db, "params", 0, 0);
if (!cmd) {
fprintf(stderr, "ERROR: Command needed.\n");
return 1;
}
if (strcasecmp(cmd, "create")==0) {
rv=createArchive(db, argc, argv);
}
else if (strcasecmp(cmd, "add")==0) {
rv=add2Archive(db, argc, argv);
}
else if (strcasecmp(cmd, "list")==0) {
rv=listArchive(db, argc, argv);
}
else if (strcasecmp(cmd, "check")==0) {
rv=checkArchive(db, argc, argv);
}
else if (strcasecmp(cmd, "extract")==0) {
rv=extractArchive(db, argc, argv);
}
else if (strcasecmp(cmd, "sign")==0) {
rv=signArchive(db, argc, argv);
}
else if (strcasecmp(cmd, "verify")==0) {
rv=verifyArchive(db, argc, argv);
}
else if (strcasecmp(cmd, "mkkey")==0) {
rv=mkArchiveKey(db, argc, argv);
}
else if (strcasecmp(cmd, "rfi")==0) {
rv=releaseFillIn(db, argc, argv);
}
else {
fprintf(stderr, "ERROR: Unknown command \"%s\".\n", cmd);
rv=1;
}
err=GWEN_Fini();
if (err) {
fprintf(stderr,
"WARNING: Could not deinitialize Gwenhywfar.\n");
}
return rv;
}
int main(int argc, char **argv) {
AB_BANKING *ab;
AB_ACCOUNT_LIST2 *accs;
int rv;
GWEN_GUI *gui;
gui=GWEN_Gui_CGui_new();
GWEN_Gui_SetGui(gui);
ab=AB_Banking_new("tutorial2", 0, 0);
rv=AB_Banking_Init(ab);
if (rv) {
fprintf(stderr, "Error on init (%d)\n", rv);
return 2;
}
rv=AB_Banking_OnlineInit(ab);
if (rv) {
fprintf(stderr, "Error on onlineinit (%d)\n", rv);
return 2;
}
fprintf(stderr, "AqBanking successfully initialized.\n");
/* Get a list of accounts which are known to AqBanking.
* There are some pecularities about the list returned:
* The list itself is owned by the caller (who must call
* AB_Account_List2_free() as we do below), but the elements of that
* list (->the accounts) are still owned by AqBanking.
* Therefore you MUST NOT free any of the accounts within the list returned.
* This also rules out calling AB_Account_List2_freeAll() which not only
* frees the list itself but also frees all its elements.
*
* The rest of this tutorial shows how lists are generally used by
* AqBanking.
*/
accs=AB_Banking_GetAccounts(ab);
if (accs) {
AB_ACCOUNT_LIST2_ITERATOR *it;
/* List2's are traversed using iterators. An iterator is an object
* which points to a single element of a list.
* If the list is empty NULL is returned.
*/
it=AB_Account_List2_First(accs);
if (it) {
AB_ACCOUNT *a;
/* this function returns a pointer to the element of the list to
* which the iterator currently points to */
a=AB_Account_List2Iterator_Data(it);
while(a) {
AB_PROVIDER *pro;
/* every account is assigned to a backend (sometimes called provider)
* which actually performs online banking tasks. We get a pointer
* to that provider/backend with this call to show its name in our
* example.*/
pro=AB_Account_GetProvider(a);
fprintf(stderr,
"Account: %s (%s) %s (%s) [%s]\n",
AB_Account_GetBankCode(a),
AB_Account_GetBankName(a),
AB_Account_GetAccountNumber(a),
AB_Account_GetAccountName(a),
/* the name of the provider/backend as decribed above */
AB_Provider_GetName(pro));
/* this function lets the iterator advance to the next element in
* the list, so a following call to AB_Account_List2Iterator_Data()
* would return a pointer to the next element.
* This function also returns a pointer to the next element of the
* list. If there is no next element then NULL is returned. */
a=AB_Account_List2Iterator_Next(it);
}
/* the iterator must be freed after using it */
AB_Account_List2Iterator_free(it);
}
/* as discussed the list itself is only a container which has to be freed
* after use. This explicitly does not free any of the elements in that
* list, and it shouldn't because AqBanking still is the owner of the
* accounts */
AB_Account_List2_free(accs);
}
rv=AB_Banking_OnlineFini(ab);
if (rv) {
fprintf(stderr, "ERROR: Error on online deinit (%d)\n", rv);
return 3;
}
rv=AB_Banking_Fini(ab);
if (rv) {
fprintf(stderr, "ERROR: Error on deinit (%d)\n", rv);
return 3;
}
AB_Banking_free(ab);
return 0;
}
int test3(int argc, char **argv) {
#ifdef USE_GWENGUI_GTK2
GWEN_GUI *gui;
GWEN_DIALOG *dlg;
int rv;
AB_BANKING *ab;
rv=GWEN_Init();
if (rv) {
fprintf(stderr, "ERROR: Unable to init Gwen.\n");
exit(2);
}
GWEN_Logger_SetLevel(AQBANKING_LOGDOMAIN, GWEN_LoggerLevel_Info);
GWEN_Logger_SetLevel(AQOFXCONNECT_LOGDOMAIN, GWEN_LoggerLevel_Info);
GWEN_Logger_SetLevel(GWEN_LOGDOMAIN, GWEN_LoggerLevel_Debug);
gtk_init(&argc, &argv);
gui=Gtk2_Gui_new();
GWEN_Gui_SetGui(gui);
ab=AB_Banking_new("test-ofxhome", NULL, 0);
rv=AB_Banking_Init(ab);
if (rv<0){
fprintf(stderr, "Error on banking init: %d\n", rv);
exit(2);
}
AB_Gui_Extend(gui, ab);
dlg=OH_GetInstituteDialog_new("/tmp/ofx", NULL);
if (dlg==NULL) {
fprintf(stderr, "Could not create dialog\n");
exit(2);
}
rv=GWEN_Gui_ExecDialog(dlg, 0);
if (rv<=0){
fprintf(stderr, "Dialog was aborted/rejected\n");
}
else {
const OH_INSTITUTE_DATA *od;
fprintf(stderr, "Dialog accepted, all fine\n");
od=OH_GetInstituteDialog_GetSelectedInstitute(dlg);
if (od) {
fprintf(stderr, "- Id : %d\n", OH_InstituteData_GetId(od));
fprintf(stderr, "- Name: %s\n", OH_InstituteData_GetName(od));
fprintf(stderr, "- FID : %s\n", OH_InstituteData_GetFid(od));
fprintf(stderr, "- ORG : %s\n", OH_InstituteData_GetOrg(od));
fprintf(stderr, "- URL : %s\n", OH_InstituteData_GetUrl(od));
}
}
GWEN_Dialog_free(dlg);
AB_Gui_Unextend(gui);
rv=AB_Banking_Fini(ab);
if (rv<0){
fprintf(stderr, "Error on banking fini: %d\n", rv);
exit(2);
}
AB_Banking_free(ab);
GWEN_Gui_free(gui);
#endif
return 0;
}
int main(int argc, char **argv) {
int rv;
GWEN_DB_NODE *db;
const char *s;
LC_CLIENT *cl;
GWEN_LOGGER_LOGTYPE logType;
GWEN_LOGGER_LEVEL logLevel;
GWEN_GUI *gui;
gui=GWEN_Gui_CGui_new();
GWEN_Gui_SetGui(gui);
db=GWEN_DB_Group_new("arguments");
rv=GWEN_Args_Check(argc, argv, 1,
GWEN_ARGS_MODE_ALLOW_FREEPARAM,
prg_args,
db);
if (rv==GWEN_ARGS_RESULT_HELP) {
GWEN_BUFFER *ubuf;
ubuf=GWEN_Buffer_new(0, 256, 0, 1);
if (GWEN_Args_Usage(prg_args, ubuf, GWEN_ArgsOutType_Txt)) {
fprintf(stderr, "Could not generate usage string.\n");
GWEN_Buffer_free(ubuf);
return RETURNVALUE_PARAM;
}
fprintf(stdout,
I18N("General usage: %s COMMAND [OPTIONS]\n"
"Allowed Commands:\n"
" This tool accepts the following commands:\n"
" loaded\n"
" show the amount of money stored on the card\n"
" maxload\n"
" show the maximum amount to be stored on the card\n"
" maxxfer\n"
" show the maximum amount which can be transferred "
"in one session.\n"
"\n"
"Allowed Options:\n"),
argv[0]);
fprintf(stdout, "%s\n", GWEN_Buffer_GetStart(ubuf));
GWEN_Buffer_free(ubuf);
return 0;
}
if (rv<1) {
fprintf(stderr, "ERROR: Error in argument list (%d)\n", rv);
return RETURNVALUE_PARAM;
}
/* setup logging */
s=GWEN_DB_GetCharValue(db, "loglevel", 0, "warning");
logLevel=GWEN_Logger_Name2Level(s);
if (logLevel==GWEN_LoggerLevel_Unknown) {
fprintf(stderr, "ERROR: Unknown log level (%s)\n", s);
return RETURNVALUE_PARAM;
}
s=GWEN_DB_GetCharValue(db, "logtype", 0, "console");
logType=GWEN_Logger_Name2Logtype(s);
if (logType==GWEN_LoggerType_Unknown) {
fprintf(stderr, "ERROR: Unknown log type (%s)\n", s);
return RETURNVALUE_PARAM;
}
rv=GWEN_Logger_Open(LC_LOGDOMAIN,
"geldkarte3",
GWEN_DB_GetCharValue(db, "logfile", 0, "geldkarte3.log"),
logType,
GWEN_LoggerFacility_User);
if (rv) {
fprintf(stderr, "ERROR: Could not setup logging (%d).\n", rv);
return RETURNVALUE_SETUP;
}
GWEN_Logger_SetLevel(LC_LOGDOMAIN, logLevel);
/* get command */
s=GWEN_DB_GetCharValue(db, "params", 0, 0);
if (!s) {
fprintf(stderr, "No command given.\n");
GWEN_DB_Group_free(db);
return RETURNVALUE_PARAM;
}
cl=LC_Client_new("geldkarte", PROGRAM_VERSION);
if (LC_Client_Init(cl)) {
fprintf(stderr, "ERROR: Could not init libchipcard3.\n");
LC_Client_free(cl);
GWEN_DB_Group_free(db);
return RETURNVALUE_SETUP;
}
/* handle command */
if (strcasecmp(s, "loaded")==0) {
rv=loaded(cl, db);
}
else if (strcasecmp(s, "maxload")==0) {
rv=maxload(cl, db);
}
else if (strcasecmp(s, "maxxfer")==0) {
rv=maxxfer(cl, db);
}
else if (strcasecmp(s, "blogs")==0) {
rv=b_logs(cl, db);
}
else {
fprintf(stderr, "Unknown command \"%s\"", s);
rv=RETURNVALUE_PARAM;
}
LC_Client_free(cl);
GWEN_DB_Group_free(db);
return 0;
}
int main(int argc, char **argv) {
GWEN_DB_NODE *db;
const char *cmd;
int rv;
int err;
GWEN_GUI *gui;
const char *localedir;
GWEN_STRINGLIST *slist;
const GWEN_ARGS args[]={
{
GWEN_ARGS_FLAGS_HAS_ARGUMENT, /* flags */
GWEN_ArgsType_Char, /* type */
"cfgfile", /* name */
0, /* minnum */
1, /* maxnum */
"C", /* short option */
"cfgfile", /* long option */
"Specify the configuration file", /* short description */
"Specify the configuration file" /* long description */
},
{
0, /* flags */
GWEN_ArgsType_Int, /* type */
"forcePin", /* name */
0, /* minnum */
1, /* maxnum */
0, /* short option */
"forcepin", /* long option */
"force pin entry", /* short description */
"force pin entry even if the error counter is not zero"
},
{
GWEN_ARGS_FLAGS_HELP | GWEN_ARGS_FLAGS_LAST, /* flags */
GWEN_ArgsType_Int, /* type */
"help", /* name */
0, /* minnum */
0, /* maxnum */
"h", /* short option */
"help", /* long option */
"Show this help screen", /* short description */
"Show this help screen" /* long description */
}
};
err=GWEN_Init();
if (err) {
fprintf(stderr, "Could not initialize Gwenhywfar.\n");
return 2;
}
gui=GWEN_Gui_CGui_new();
GWEN_Gui_SetGui(gui);
slist =
GWEN_PathManager_GetPaths(GWEN_PM_LIBNAME, GWEN_PM_LOCALEDIR);
assert(GWEN_StringList_Count(slist) > 0);
localedir = GWEN_StringList_FirstString(slist);
#ifdef HAVE_I18N
setlocale(LC_ALL,"");
if (bindtextdomain(PACKAGE, localedir)==0)
fprintf(stderr, "Error binding locale\n");
#endif
GWEN_StringList_free(slist);
GWEN_Logger_Open(GCT_LOGDOMAIN, "gct-tool", 0,
GWEN_LoggerType_Console,
GWEN_LoggerFacility_User);
#ifdef DEBUG_GCT_TOOL
GWEN_Logger_SetLevel(GCT_LOGDOMAIN, GWEN_LoggerLevel_Info);
GWEN_Logger_SetLevel(GWEN_LOGDOMAIN, GWEN_LoggerLevel_Debug);
GWEN_Logger_SetLevel(0, GWEN_LoggerLevel_Info);
#else
GWEN_Logger_SetLevel(GCT_LOGDOMAIN, GWEN_LoggerLevel_Warning);
GWEN_Logger_SetLevel(GWEN_LOGDOMAIN, GWEN_LoggerLevel_Warning);
GWEN_Logger_SetLevel(0, GWEN_LoggerLevel_Warning);
#endif
#ifdef GCT_IS_EXPERIMENTAL
fprintf(stderr, "\n");
fprintf(stderr, "\n");
fprintf(stderr, "=================== WARNING ===================\n");
fprintf(stderr, "This tool is still EXPERIMENTAL !!!\n");
fprintf(stderr, "Please DON'T USE it with your daily key files !\n");
fprintf(stderr, "===============================================\n");
fprintf(stderr, "\n");
fprintf(stderr, "\n");
#endif
db=GWEN_DB_Group_new("arguments");
rv=GWEN_Args_Check(argc, argv, 1,
GWEN_ARGS_MODE_ALLOW_FREEPARAM |
GWEN_ARGS_MODE_STOP_AT_FREEPARAM,
args,
db);
if (rv==GWEN_ARGS_RESULT_ERROR) {
fprintf(stderr, "ERROR: Could not parse arguments main\n");
return -1;
}
else if (rv==GWEN_ARGS_RESULT_HELP) {
GWEN_BUFFER *ubuf;
ubuf=GWEN_Buffer_new(0, 1024, 0, 1);
GWEN_Buffer_AppendString(ubuf,
I18N("Usage: "));
GWEN_Buffer_AppendString(ubuf, argv[0]);
GWEN_Buffer_AppendString(ubuf,
I18N(" [GLOBAL OPTIONS] COMMAND "
"[LOCAL OPTIONS]\n"));
GWEN_Buffer_AppendString(ubuf,
I18N("\nGlobal Options:\n"));
if (GWEN_Args_Usage(args, ubuf, GWEN_ArgsOutType_Txt)) {
fprintf(stderr, "ERROR: Could not create help string\n");
return 1;
}
GWEN_Buffer_AppendString(ubuf,
I18N("\nCommands:\n\n"));
GWEN_Buffer_AppendString(ubuf,
I18N(" create:\n"
" This command creates a crypt token"
"\n\n"));
GWEN_Buffer_AppendString(ubuf,
I18N(" showuser:\n"
" Display user data stored on the "
"token\n\n"));
fprintf(stderr, "%s\n", GWEN_Buffer_GetStart(ubuf));
GWEN_Buffer_free(ubuf);
return 0;
}
if (rv) {
argc-=rv-1;
argv+=rv-1;
}
cmd=GWEN_DB_GetCharValue(db, "params", 0, 0);
if (!cmd) {
fprintf(stderr, "ERROR: Command needed.\n");
return 1;
}
if (strcasecmp(cmd, "sign1")==0) {
rv=signWithOld(db, argc, argv);
}
else if (strcasecmp(cmd, "sign2")==0) {
rv=signWithNew(db, argc, argv);
}
else if (strcasecmp(cmd, "crypt1")==0) {
rv=cryptWithOld(db, argc, argv);
}
else if (strcasecmp(cmd, "crypt2")==0) {
rv=cryptWithNew(db, argc, argv);
}
else if (strcasecmp(cmd, "crypt3")==0) {
rv=cryptWithNew2(db, argc, argv);
}
else {
fprintf(stderr, "ERROR: Unknown command \"%s\".\n", cmd);
rv=1;
}
err=GWEN_Fini();
if (err) {
fprintf(stderr,
"WARNING: Could not deinitialize Gwenhywfar.\n");
}
return rv;
}
