/* static */ int AIVehicle::GetRefitCapacity(VehicleID vehicle_id, CargoID cargo)
{
if (!IsValidVehicle(vehicle_id)) return -1;
if (!AICargo::IsValidCargo(cargo)) return -1;
CommandCost res = ::DoCommand(0, vehicle_id, cargo, DC_QUERY_COST, GetCmdRefitVeh(::Vehicle::Get(vehicle_id)));
return CmdSucceeded(res) ? _returned_refit_capacity : -1;
}
/**
* Builds and refits a replacement vehicle
* Important: The old vehicle is still in the original vehicle chain (used for determining the cargo when the old vehicle did not carry anything, but the new one does)
* @param old_veh A single (articulated/multiheaded) vehicle that shall be replaced.
* @param new_vehicle Returns the newly build and refittet vehicle
* @param part_of_chain The vehicle is part of a train
* @return cost or error
*/
static CommandCost BuildReplacementVehicle(Vehicle *old_veh, Vehicle **new_vehicle, bool part_of_chain)
{
*new_vehicle = NULL;
/* Shall the vehicle be replaced? */
const Company *c = Company::Get(_current_company);
EngineID e;
CommandCost cost = GetNewEngineType(old_veh, c, e);
if (cost.Failed()) return cost;
if (e == INVALID_ENGINE) return CommandCost(); // neither autoreplace is set, nor autorenew is triggered
/* Does it need to be refitted */
CargoID refit_cargo = GetNewCargoTypeForReplace(old_veh, e, part_of_chain);
if (refit_cargo == CT_INVALID) return CommandCost(); // incompatible cargoes
/* Build the new vehicle */
cost = DoCommand(old_veh->tile, e, 0, DC_EXEC | DC_AUTOREPLACE, GetCmdBuildVeh(old_veh));
if (cost.Failed()) return cost;
Vehicle *new_veh = Vehicle::Get(_new_vehicle_id);
*new_vehicle = new_veh;
/* Refit the vehicle if needed */
if (refit_cargo != CT_NO_REFIT) {
byte subtype = GetBestFittingSubType(old_veh, new_veh, refit_cargo);
cost.AddCost(DoCommand(0, new_veh->index, refit_cargo | (subtype << 8), DC_EXEC, GetCmdRefitVeh(new_veh)));
assert(cost.Succeeded()); // This should be ensured by GetNewCargoTypeForReplace()
}
/* Try to reverse the vehicle, but do not care if it fails as the new type might not be reversible */
if (new_veh->type == VEH_TRAIN && HasBit(Train::From(old_veh)->flags, VRF_REVERSE_DIRECTION)) {
DoCommand(0, new_veh->index, true, DC_EXEC, CMD_REVERSE_TRAIN_DIRECTION);
}
return cost;
}
/**
* Clone a vehicle. If it is a train, it will clone all the cars too
* @param tile tile of the depot where the cloned vehicle is build
* @param flags type of operation
* @param p1 the original vehicle's index
* @param p2 1 = shared orders, else copied orders
* @param text unused
* @return the cost of this operation or an error
*/
CommandCost CmdCloneVehicle(TileIndex tile, DoCommandFlag flags, uint32 p1, uint32 p2, const char *text)
{
CommandCost total_cost(EXPENSES_NEW_VEHICLES);
Vehicle *v = Vehicle::GetIfValid(p1);
if (v == NULL || !v->IsPrimaryVehicle()) return CMD_ERROR;
Vehicle *v_front = v;
Vehicle *w = NULL;
Vehicle *w_front = NULL;
Vehicle *w_rear = NULL;
/*
* v_front is the front engine in the original vehicle
* v is the car/vehicle of the original vehicle that is currently being copied
* w_front is the front engine of the cloned vehicle
* w is the car/vehicle currently being cloned
* w_rear is the rear end of the cloned train. It's used to add more cars and is only used by trains
*/
CommandCost ret = CheckOwnership(v->owner);
if (ret.Failed()) return ret;
if (v->type == VEH_TRAIN && (!v->IsFrontEngine() || Train::From(v)->crash_anim_pos >= 4400)) return CMD_ERROR;
/* check that we can allocate enough vehicles */
if (!(flags & DC_EXEC)) {
int veh_counter = 0;
do {
veh_counter++;
} while ((v = v->Next()) != NULL);
if (!Vehicle::CanAllocateItem(veh_counter)) {
return_cmd_error(STR_ERROR_TOO_MANY_VEHICLES_IN_GAME);
}
}
v = v_front;
do {
if (v->type == VEH_TRAIN && Train::From(v)->IsRearDualheaded()) {
/* we build the rear ends of multiheaded trains with the front ones */
continue;
}
/* In case we're building a multi headed vehicle and the maximum number of
* vehicles is almost reached (e.g. max trains - 1) not all vehicles would
* be cloned. When the non-primary engines were build they were seen as
* 'new' vehicles whereas they would immediately be joined with a primary
* engine. This caused the vehicle to be not build as 'the limit' had been
* reached, resulting in partially build vehicles and such. */
DoCommandFlag build_flags = flags;
if ((flags & DC_EXEC) && !v->IsPrimaryVehicle()) build_flags |= DC_AUTOREPLACE;
CommandCost cost = DoCommand(tile, v->engine_type | (1 << 16), 0, build_flags, GetCmdBuildVeh(v));
if (cost.Failed()) {
/* Can't build a part, then sell the stuff we already made; clear up the mess */
if (w_front != NULL) DoCommand(w_front->tile, w_front->index | (1 << 20), 0, flags, GetCmdSellVeh(w_front));
return cost;
}
total_cost.AddCost(cost);
if (flags & DC_EXEC) {
w = Vehicle::Get(_new_vehicle_id);
if (v->type == VEH_TRAIN && HasBit(Train::From(v)->flags, VRF_REVERSE_DIRECTION)) {
SetBit(Train::From(w)->flags, VRF_REVERSE_DIRECTION);
}
if (v->type == VEH_TRAIN && !v->IsFrontEngine()) {
/* this s a train car
* add this unit to the end of the train */
CommandCost result = DoCommand(0, w->index | 1 << 20, w_rear->index, flags, CMD_MOVE_RAIL_VEHICLE);
if (result.Failed()) {
/* The train can't be joined to make the same consist as the original.
* Sell what we already made (clean up) and return an error. */
DoCommand(w_front->tile, w_front->index | 1 << 20, 0, flags, GetCmdSellVeh(w_front));
DoCommand(w_front->tile, w->index | 1 << 20, 0, flags, GetCmdSellVeh(w));
return result; // return error and the message returned from CMD_MOVE_RAIL_VEHICLE
}
} else {
/* this is a front engine or not a train. */
w_front = w;
w->service_interval = v->service_interval;
w->SetServiceIntervalIsCustom(v->ServiceIntervalIsCustom());
w->SetServiceIntervalIsPercent(v->ServiceIntervalIsPercent());
}
w_rear = w; // trains needs to know the last car in the train, so they can add more in next loop
}
} while (v->type == VEH_TRAIN && (v = v->GetNextVehicle()) != NULL);
if ((flags & DC_EXEC) && v_front->type == VEH_TRAIN) {
/* for trains this needs to be the front engine due to the callback function */
_new_vehicle_id = w_front->index;
}
if (flags & DC_EXEC) {
/* Cloned vehicles belong to the same group */
DoCommand(0, v_front->group_id, w_front->index, flags, CMD_ADD_VEHICLE_GROUP);
}
/* Take care of refitting. */
w = w_front;
v = v_front;
/* Both building and refitting are influenced by newgrf callbacks, which
* makes it impossible to accurately estimate the cloning costs. In
* particular, it is possible for engines of the same type to be built with
* different numbers of articulated parts, so when refitting we have to
* loop over real vehicles first, and then the articulated parts of those
* vehicles in a different loop. */
do {
do {
if (flags & DC_EXEC) {
assert(w != NULL);
/* Find out what's the best sub type */
byte subtype = GetBestFittingSubType(v, w, v->cargo_type);
if (w->cargo_type != v->cargo_type || w->cargo_subtype != subtype) {
CommandCost cost = DoCommand(0, w->index, v->cargo_type | 1U << 7 | (subtype << 8), flags, GetCmdRefitVeh(v));
if (cost.Succeeded()) total_cost.AddCost(cost);
}
if (w->IsGroundVehicle() && w->HasArticulatedPart()) {
w = w->GetNextArticulatedPart();
} else {
break;
}
} else {
const Engine *e = v->GetEngine();
CargoID initial_cargo = (e->CanCarryCargo() ? e->GetDefaultCargoType() : (CargoID)CT_INVALID);
if (v->cargo_type != initial_cargo && initial_cargo != CT_INVALID) {
bool dummy;
total_cost.AddCost(GetRefitCost(NULL, v->engine_type, v->cargo_type, v->cargo_subtype, &dummy));
}
}
if (v->IsGroundVehicle() && v->HasArticulatedPart()) {
v = v->GetNextArticulatedPart();
} else {
break;
}
} while (v != NULL);
if ((flags & DC_EXEC) && v->type == VEH_TRAIN) w = w->GetNextVehicle();
} while (v->type == VEH_TRAIN && (v = v->GetNextVehicle()) != NULL);
if (flags & DC_EXEC) {
/*
* Set the orders of the vehicle. Cannot do it earlier as we need
* the vehicle refitted before doing this, otherwise the moved
* cargo types might not match (passenger vs non-passenger)
*/
DoCommand(0, w_front->index | (p2 & 1 ? CO_SHARE : CO_COPY) << 30, v_front->index, flags, CMD_CLONE_ORDER);
/* Now clone the vehicle's name, if it has one. */
if (v_front->name != NULL) CloneVehicleName(v_front, w_front);
}
/* Since we can't estimate the cost of cloning a vehicle accurately we must
* check whether the company has enough money manually. */
if (!CheckCompanyHasMoney(total_cost)) {
if (flags & DC_EXEC) {
/* The vehicle has already been bought, so now it must be sold again. */
DoCommand(w_front->tile, w_front->index | 1 << 20, 0, flags, GetCmdSellVeh(w_front));
}
return total_cost;
}
return total_cost;
}
/* static */ bool AIVehicle::RefitVehicle(VehicleID vehicle_id, CargoID cargo)
{
EnforcePrecondition(false, IsValidVehicle(vehicle_id) && AICargo::IsValidCargo(cargo));
return AIObject::DoCommand(0, vehicle_id, cargo, GetCmdRefitVeh(::Vehicle::Get(vehicle_id)));
}
