void CPolyLine::RemoveContour( int icont )
{
Undraw();
int istart = GetContourStart( icont );
int iend = GetContourEnd( icont );
if( icont == 0 && GetNumContours() == 1 )
{
// remove the only contour
ASSERT(0);
}
else if( icont == GetNumContours()-1 )
{
// remove last contour
corner.SetSize( GetContourStart(icont) );
side_style.SetSize( GetContourStart(icont) );
m_ncorners -= iend - istart + 1;
}
else
{
// remove closed contour
for( int ic=iend; ic>=istart; ic-- )
{
corner.RemoveAt( ic );
side_style.RemoveAt( ic );
m_ncorners--;
}
}
Draw();
}
// delete corner and adjust arrays
//
void CPolyLine::DeleteCorner( int ic, BOOL bDraw )
{
Undraw();
int icont = GetContour( ic );
int istart = GetContourStart( icont );
int iend = GetContourEnd( icont );
BOOL bClosed = icont < GetNumContours()-1 || GetClosed();
if( !bClosed )
{
// open contour, must be last contour
corner.RemoveAt( ic );
if( ic != istart )
side_style.RemoveAt( ic-1 );
m_ncorners--;
}
else
{
// closed contour
corner.RemoveAt( ic );
side_style.RemoveAt( ic );
if( ic == iend )
corner[ic-1].end_contour = TRUE;
m_ncorners--;
}
if( bClosed && GetContourSize(icont) < 3 )
{
// delete the entire contour
RemoveContour( icont );
}
if( bDraw )
Draw();
}
void CPolyLine::RemoveContour( int icont )
/******************************************/
/**
* Function RemoveContour
* @param icont = contour number to remove
* remove a contour only if there is more than 1 contour
*/
{
UnHatch();
int istart = GetContourStart( icont );
int iend = GetContourEnd( icont );
int polycount = GetContoursCount();
if( icont == 0 && polycount == 1 )
{
// remove the only contour
wxASSERT( 0 );
}
else
{
// remove closed contour
for( int ic = iend; ic>=istart; ic-- )
{
m_CornersList.DeleteCorner( ic );
}
}
Hatch();
}
// test to see if a point is inside polyline
//
bool CPolyLine::TestPointInside( int px, int py )
{
if( !GetClosed() )
{
wxASSERT( 0 );
}
// Test all polygons.
// Since the first is the main outline, and other are holes,
// if the tested point is inside only one contour, it is inside the whole polygon
// (in fact inside the main outline, and outside all holes).
// if inside 2 contours (the main outline + an hole), it is outside the poly.
int polycount = GetContoursCount();
bool inside = false;
for( int icont = 0; icont < polycount; icont++ )
{
int istart = GetContourStart( icont );
int iend = GetContourEnd( icont );
// test point inside the current polygon
if( TestPointInsidePolygon( m_CornersList, istart, iend, px, py ) )
inside = not inside;
}
return inside;
}
// start dragging new corner to be inserted into side, make side and hatching invisible
//
void CPolyLine::StartDraggingToInsertCorner( CDC * pDC, int ic, int x, int y, int crosshair )
{
if( !m_dlist )
ASSERT(0);
int icont = GetContour( ic );
int istart = GetContourStart( icont );
int iend = GetContourEnd( icont );
int post_c;
if( ic == iend )
post_c = istart;
else
post_c = ic + 1;
int xi = corner[ic].x;
int yi = corner[ic].y;
int xf = corner[post_c].x;
int yf = corner[post_c].y;
m_dlist->StartDraggingLineVertex( pDC, x, y, xi, yi, xf, yf,
LAY_SELECTION, LAY_SELECTION, 1, 1, DSS_STRAIGHT, DSS_STRAIGHT,
0, 0, 0, 0, crosshair );
m_dlist->CancelHighLight();
m_dlist->Set_visible( dl_side[ic], 0 );
for( int ih=0; ih<m_nhatch; ih++ )
m_dlist->Set_visible( dl_hatch[ih], 0 );
}
// Test for intersection of sides
//
int CPolyLine::TestIntersection( CPolyLine * poly )
{
if( !GetClosed() )
ASSERT(0);
if( !poly->GetClosed() )
ASSERT(0);
for( int ic=0; ic<GetNumContours(); ic++ )
{
int istart = GetContourStart(ic);
int iend = GetContourEnd(ic);
for( int is=istart; is<=iend; is++ )
{
int xi = GetX(is);
int yi = GetY(is);
int xf, yf;
if( is < GetContourEnd(ic) )
{
xf = GetX(is+1);
yf = GetY(is+1);
}
else
{
xf = GetX(istart);
yf = GetY(istart);
}
int style = GetSideStyle(is);
for( int ic2=0; ic2<poly->GetNumContours(); ic2++ )
{
int istart2 = poly->GetContourStart(ic2);
int iend2 = poly->GetContourEnd(ic2);
for( int is2=istart2; is2<=iend2; is2++ )
{
int xi2 = poly->GetX(is2);
int yi2 = poly->GetY(is2);
int xf2, yf2;
if( is2 < poly->GetContourEnd(ic2) )
{
xf2 = poly->GetX(is2+1);
yf2 = poly->GetY(is2+1);
}
else
{
xf2 = poly->GetX(istart2);
yf2 = poly->GetY(istart2);
}
int style2 = poly->GetSideStyle(is2);
// test for intersection between side and side2
}
}
}
}
return 0;
}
/*
* Function Distance
* Calculates the distance between a segment and a polygon (with holes):
* param aStart is the starting point of the segment.
* param aEnd is the ending point of the segment.
* param aWidth is the width of the segment.
* return distance between the segment and outline.
* 0 if segment intersects or is inside
*/
int CPolyLine::Distance( wxPoint aStart, wxPoint aEnd, int aWidth )
{
// We calculate the min dist between the segment and each outline segment
// However, if the segment to test is inside the outline, and does not cross
// any edge, it can be seen outside the polygon.
// Therefore test if a segment end is inside ( testing only one end is enough )
if( TestPointInside( aStart.x, aStart.y ) )
return 0;
int distance = INT_MAX;
int polycount = GetContoursCount();
for( int icont = 0; icont < polycount; icont++ )
{
int ic_start = GetContourStart( icont );
int ic_end = GetContourEnd( icont );
// now test spacing between area outline and segment
for( int ic2 = ic_start; ic2 <= ic_end; ic2++ )
{
int bx1 = GetX( ic2 );
int by1 = GetY( ic2 );
int bx2, by2;
if( ic2 == ic_end )
{
bx2 = GetX( ic_start );
by2 = GetY( ic_start );
}
else
{
bx2 = GetX( ic2 + 1 );
by2 = GetY( ic2 + 1 );
}
int d = GetClearanceBetweenSegments( bx1, by1, bx2, by2, 0,
aStart.x, aStart.y, aEnd.x, aEnd.y,
aWidth,
1, // min clearance, should be > 0
NULL, NULL );
if( distance > d )
distance = d;
if( distance <= 0 )
return 0;
}
}
return distance;
}
CRect CPolyLine::GetCornerBounds( int icont )
{
CRect r;
r.left = r.bottom = INT_MAX;
r.right = r.top = INT_MIN;
int istart = GetContourStart( icont );
int iend = GetContourEnd( icont );
for( int i=istart; i<=iend; i++ )
{
r.left = min( r.left, corner[i].x );
r.right = max( r.right, corner[i].x );
r.bottom = min( r.bottom, corner[i].y );
r.top = max( r.top, corner[i].y );
}
return r;
}
/*
* Function Distance
* Calculates the distance between a point and polygon (with holes):
* param aPoint is the coordinate of the point.
* return distance between the point and outline.
* 0 if the point is inside
*/
int CPolyLine::Distance( const wxPoint& aPoint )
{
// We calculate the dist between the point and each outline segment
// If the point is inside the outline, the dist is 0.
if( TestPointInside( aPoint.x, aPoint.y ) )
return 0;
int distance = INT_MAX;
int polycount = GetContoursCount();
for( int icont = 0; icont < polycount; icont++ )
{
int ic_start = GetContourStart( icont );
int ic_end = GetContourEnd( icont );
// now test spacing between area outline and segment
for( int ic2 = ic_start; ic2 <= ic_end; ic2++ )
{
int bx1 = GetX( ic2 );
int by1 = GetY( ic2 );
int bx2, by2;
if( ic2 == ic_end )
{
bx2 = GetX( ic_start );
by2 = GetY( ic_start );
}
else
{
bx2 = GetX( ic2 + 1 );
by2 = GetY( ic2 + 1 );
}
int d = KiROUND( GetPointToLineSegmentDistance( aPoint.x, aPoint.y,
bx1, by1, bx2, by2 ) );
if( distance > d )
distance = d;
if( distance <= 0 )
return 0;
}
}
return distance;
}
const EDA_RECT CPolyLine::GetBoundingBox( int icont )
{
int xmin = INT_MAX;
int ymin = INT_MAX;
int xmax = INT_MIN;
int ymax = INT_MIN;
int istart = GetContourStart( icont );
int iend = GetContourEnd( icont );
for( int i = istart; i<=iend; i++ )
{
xmin = std::min( xmin, m_CornersList[i].x );
xmax = std::max( xmax, m_CornersList[i].x );
ymin = std::min( ymin, m_CornersList[i].y );
ymax = std::max( ymax, m_CornersList[i].y );
}
EDA_RECT r;
r.SetOrigin( wxPoint( xmin, ymin ) );
r.SetEnd( wxPoint( xmax, ymax ) );
return r;
}
// start dragging corner to new position, make adjacent sides and hatching invisible
//
void CPolyLine::StartDraggingToMoveCorner( CDC * pDC, int ic, int x, int y, int crosshair )
{
if( !m_dlist )
ASSERT(0);
// see if corner is the first or last corner of an open contour
int icont = GetContour( ic );
int istart = GetContourStart( icont );
int iend = GetContourEnd( icont );
if( !GetClosed()
&& icont == GetNumContours() - 1
&& (ic == istart || ic == iend) )
{
// yes
int style, xi, yi, iside;
if( ic == istart )
{
// first corner
iside = ic;
xi = GetX( ic+1 );
yi = GetY( ic+1 );
style = GetSideStyle( iside );
// reverse arc since we are drawing from corner 1 to 0
if( style == CPolyLine::ARC_CW )
style = CPolyLine::ARC_CCW;
else if( style == CPolyLine::ARC_CCW )
style = CPolyLine::ARC_CW;
}
else
{
// last corner
iside = ic - 1;
xi = GetX( ic-1 );
yi = GetY( ic-1);
style = GetSideStyle( iside );
}
m_dlist->StartDraggingArc( pDC, style, GetX(ic), GetY(ic), xi, yi, LAY_SELECTION, 1, crosshair );
m_dlist->CancelHighLight();
m_dlist->Set_visible( dl_side[iside], 0 );
for( int ih=0; ih<m_nhatch; ih++ )
m_dlist->Set_visible( dl_hatch[ih], 0 );
}
else
{
// no
// get indexes for preceding and following corners
int pre_c, post_c;
int poly_side_style1, poly_side_style2;
int style1, style2;
if( ic == istart )
{
pre_c = iend;
post_c = istart+1;
poly_side_style1 = side_style[iend];
poly_side_style2 = side_style[istart];
}
else if( ic == iend )
{
// last side
pre_c = ic-1;
post_c = istart;
poly_side_style1 = side_style[ic-1];
poly_side_style2 = side_style[ic];
}
else
{
pre_c = ic-1;
post_c = ic+1;
poly_side_style1 = side_style[ic-1];
poly_side_style2 = side_style[ic];
}
if( poly_side_style1 == STRAIGHT )
style1 = DSS_STRAIGHT;
else if( poly_side_style1 == ARC_CW )
style1 = DSS_ARC_CW;
else if( poly_side_style1 == ARC_CCW )
style1 = DSS_ARC_CCW;
if( poly_side_style2 == STRAIGHT )
style2 = DSS_STRAIGHT;
else if( poly_side_style2 == ARC_CW )
style2 = DSS_ARC_CW;
else if( poly_side_style2 == ARC_CCW )
style2 = DSS_ARC_CCW;
int xi = corner[pre_c].x;
int yi = corner[pre_c].y;
int xf = corner[post_c].x;
int yf = corner[post_c].y;
m_dlist->StartDraggingLineVertex( pDC, x, y, xi, yi, xf, yf,
LAY_SELECTION, LAY_SELECTION, 1, 1, style1, style2,
0, 0, 0, 0, crosshair );
m_dlist->CancelHighLight();
m_dlist->Set_visible( dl_side[pre_c], 0 );
m_dlist->Set_visible( dl_side[ic], 0 );
for( int ih=0; ih<m_nhatch; ih++ )
m_dlist->Set_visible( dl_hatch[ih], 0 );
}
}
/**
* Function IsPolygonSelfIntersecting
* Test a CPolyLine for self-intersection of vertex (all contours).
*
* @return :
* false if no intersecting sides
* true if intersecting sides
* When a CPolyLine is self intersectic, it need to be normalized.
* (converted to non intersecting polygons)
*/
bool CPolyLine::IsPolygonSelfIntersecting()
{
// first, check for sides intersecting other sides
int n_cont = GetContoursCount();
// make bounding rect for each contour
std::vector<EDA_RECT> cr;
cr.reserve( n_cont );
for( int icont = 0; icont<n_cont; icont++ )
cr.push_back( GetBoundingBox( icont ) );
for( int icont = 0; icont<n_cont; icont++ )
{
int is_start = GetContourStart( icont );
int is_end = GetContourEnd( icont );
for( int is = is_start; is<=is_end; is++ )
{
int is_prev = is - 1;
if( is_prev < is_start )
is_prev = is_end;
int is_next = is + 1;
if( is_next > is_end )
is_next = is_start;
int x1i = GetX( is );
int y1i = GetY( is );
int x1f = GetX( is_next );
int y1f = GetY( is_next );
// check for intersection with any other sides
for( int icont2 = icont; icont2 < n_cont; icont2++ )
{
if( !cr[icont].Intersects( cr[icont2] ) )
{
// rectangles don't overlap, do nothing
}
else
{
int is2_start = GetContourStart( icont2 );
int is2_end = GetContourEnd( icont2 );
for( int is2 = is2_start; is2<=is2_end; is2++ )
{
int is2_prev = is2 - 1;
if( is2_prev < is2_start )
is2_prev = is2_end;
int is2_next = is2 + 1;
if( is2_next > is2_end )
is2_next = is2_start;
if( icont != icont2
|| ( is2 != is && is2 != is_prev && is2 != is_next &&
is != is2_prev && is != is2_next )
)
{
int x2i = GetX( is2 );
int y2i = GetY( is2 );
int x2f = GetX( is2_next );
int y2f = GetY( is2_next );
int ret = FindSegmentIntersections( x1i, y1i, x1f, y1f,
x2i, y2i, x2f, y2f );
if( ret )
{
// intersection between non-adjacent sides
return true;
}
}
}
}
}
}
}
return false;
}
CPolyLine* CPolyLine::Chamfer( unsigned int aDistance )
{
CPolyLine* newPoly = new CPolyLine;
if( !aDistance )
{
newPoly->Copy( this );
return newPoly;
}
int polycount = GetContoursCount();
for( int contour = 0; contour < polycount; contour++ )
{
unsigned int startIndex = GetContourStart( contour );
unsigned int endIndex = GetContourEnd( contour );
for( unsigned int index = startIndex; index <= endIndex; index++ )
{
int x1, y1, nx, ny;
long long xa, ya, xb, yb;
x1 = m_CornersList[index].x;
y1 = m_CornersList[index].y;
if( index == startIndex )
{
xa = m_CornersList[endIndex].x - x1;
ya = m_CornersList[endIndex].y - y1;
}
else
{
xa = m_CornersList[index - 1].x - x1;
ya = m_CornersList[index - 1].y - y1;
}
if( index == endIndex )
{
xb = m_CornersList[startIndex].x - x1;
yb = m_CornersList[startIndex].y - y1;
}
else
{
xb = m_CornersList[index + 1].x - x1;
yb = m_CornersList[index + 1].y - y1;
}
unsigned int lena = KiROUND( hypot( xa, ya ) );
unsigned int lenb = KiROUND( hypot( xb, yb ) );
unsigned int distance = aDistance;
// Chamfer one half of an edge at most
if( 0.5 * lena < distance )
distance = int( 0.5 * lena );
if( 0.5 * lenb < distance )
distance = int( 0.5 * lenb );
nx = KiROUND( (distance * xa) / hypot( xa, ya ) );
ny = KiROUND( (distance * ya) / hypot( xa, ya ) );
if( index == startIndex )
newPoly->Start( GetLayer(), x1 + nx, y1 + ny, GetHatchStyle() );
else
newPoly->AppendCorner( x1 + nx, y1 + ny );
nx = KiROUND( (distance * xb) / hypot( xb, yb ) );
ny = KiROUND( (distance * yb) / hypot( xb, yb ) );
newPoly->AppendCorner( x1 + nx, y1 + ny );
}
newPoly->CloseLastContour();
}
return newPoly;
}
// make a gpc_polygon for a closed polyline contour
// approximates arcs with multiple straight-line segments
// if icontour = -1, make polygon with all contours,
// combining intersecting contours if possible
// returns data on arcs in arc_array
//
int CPolyLine::MakeGpcPoly( int icontour, CArray<CArc> * arc_array )
{
if( m_gpc_poly->num_contours )
FreeGpcPoly();
if( !GetClosed() && (icontour == (GetNumContours()-1) || icontour == -1))
return 1; // error
// initialize m_gpc_poly
m_gpc_poly->num_contours = 0;
m_gpc_poly->hole = NULL;
m_gpc_poly->contour = NULL;
int n_arcs = 0;
int first_contour = icontour;
int last_contour = icontour;
if( icontour == -1 )
{
first_contour = 0;
last_contour = GetNumContours() - 1;
}
if( arc_array )
arc_array->SetSize(0);
int iarc = 0;
for( int icont=first_contour; icont<=last_contour; icont++ )
{
// make gpc_polygon for this contour
gpc_polygon * gpc = new gpc_polygon;
gpc->num_contours = 0;
gpc->hole = NULL;
gpc->contour = NULL;
// first, calculate number of vertices in contour
int n_vertices = 0;
int ic_st = GetContourStart(icont);
int ic_end = GetContourEnd(icont);
for( int ic=ic_st; ic<=ic_end; ic++ )
{
int style = side_style[ic];
int x1 = corner[ic].x;
int y1 = corner[ic].y;
int x2, y2;
if( ic < ic_end )
{
x2 = corner[ic+1].x;
y2 = corner[ic+1].y;
}
else
{
x2 = corner[ic_st].x;
y2 = corner[ic_st].y;
}
if( style == STRAIGHT )
n_vertices++;
else
{
// style is ARC_CW or ARC_CCW
int n; // number of steps for arcs
n = (abs(x2-x1)+abs(y2-y1))/(CArc::MAX_STEP);
n = max( n, CArc::MIN_STEPS ); // or at most 5 degrees of arc
n_vertices += n;
n_arcs++;
}
}
// now create gcp_vertex_list for this contour
gpc_vertex_list * g_v_list = new gpc_vertex_list;
g_v_list->vertex = (gpc_vertex*)calloc( sizeof(gpc_vertex), n_vertices );
g_v_list->num_vertices = n_vertices;
int ivtx = 0;
for( int ic=ic_st; ic<=ic_end; ic++ )
{
int style = side_style[ic];
int x1 = corner[ic].x;
int y1 = corner[ic].y;
int x2, y2;
if( ic < ic_end )
{
x2 = corner[ic+1].x;
y2 = corner[ic+1].y;
}
else
{
x2 = corner[ic_st].x;
y2 = corner[ic_st].y;
}
if( style == STRAIGHT )
{
g_v_list->vertex[ivtx].x = x1;
g_v_list->vertex[ivtx].y = y1;
ivtx++;
}
else
{
// style is arc_cw or arc_ccw
int n; // number of steps for arcs
n = (abs(x2-x1)+abs(y2-y1))/(CArc::MAX_STEP);
n = max( n, CArc::MIN_STEPS ); // or at most 5 degrees of arc
double xo, yo, theta1, theta2, a, b;
a = fabs( (double)(x1 - x2) );
b = fabs( (double)(y1 - y2) );
if( style == CPolyLine::ARC_CW )
{
// clockwise arc (ie.quadrant of ellipse)
int i=0, j=0;
if( x2 > x1 && y2 > y1 )
{
// first quadrant, draw second quadrant of ellipse
xo = x2;
yo = y1;
theta1 = pi;
theta2 = pi/2.0;
}
else if( x2 < x1 && y2 > y1 )
{
// second quadrant, draw third quadrant of ellipse
xo = x1;
yo = y2;
theta1 = 3.0*pi/2.0;
theta2 = pi;
}
else if( x2 < x1 && y2 < y1 )
{
// third quadrant, draw fourth quadrant of ellipse
xo = x2;
yo = y1;
theta1 = 2.0*pi;
theta2 = 3.0*pi/2.0;
}
else
{
xo = x1; // fourth quadrant, draw first quadrant of ellipse
yo = y2;
theta1 = pi/2.0;
theta2 = 0.0;
}
}
else
{
// counter-clockwise arc
int i=0, j=0;
if( x2 > x1 && y2 > y1 )
{
xo = x1; // first quadrant, draw fourth quadrant of ellipse
yo = y2;
theta1 = 3.0*pi/2.0;
theta2 = 2.0*pi;
}
else if( x2 < x1 && y2 > y1 )
{
xo = x2; // second quadrant
yo = y1;
theta1 = 0.0;
theta2 = pi/2.0;
}
else if( x2 < x1 && y2 < y1 )
{
xo = x1; // third quadrant
yo = y2;
theta1 = pi/2.0;
theta2 = pi;
}
else
{
xo = x2; // fourth quadrant
yo = y1;
theta1 = pi;
theta2 = 3.0*pi/2.0;
}
}
// now write steps for arc
if( arc_array )
{
arc_array->SetSize(iarc+1);
(*arc_array)[iarc].style = style;
(*arc_array)[iarc].n_steps = n;
(*arc_array)[iarc].xi = x1;
(*arc_array)[iarc].yi = y1;
(*arc_array)[iarc].xf = x2;
(*arc_array)[iarc].yf = y2;
iarc++;
}
for( int is=0; is<n; is++ )
{
double theta = theta1 + ((theta2-theta1)*(double)is)/n;
double x = xo + a*cos(theta);
double y = yo + b*sin(theta);
if( is == 0 )
{
x = x1;
y = y1;
}
g_v_list->vertex[ivtx].x = x;
g_v_list->vertex[ivtx].y = y;
ivtx++;
}
}
}
if( n_vertices != ivtx )
ASSERT(0);
// add vertex_list to gpc
gpc_add_contour( gpc, g_v_list, 0 );
// now clip m_gpc_poly with gpc, put new poly into result
gpc_polygon * result = new gpc_polygon;
if( icontour == -1 && icont != 0 )
gpc_polygon_clip( GPC_DIFF, m_gpc_poly, gpc, result ); // hole
else
gpc_polygon_clip( GPC_UNION, m_gpc_poly, gpc, result ); // outside
// now copy result to m_gpc_poly
gpc_free_polygon( m_gpc_poly );
delete m_gpc_poly;
m_gpc_poly = result;
gpc_free_polygon( gpc );
delete gpc;
free( g_v_list->vertex );
free( g_v_list );
}
return 0;
}
CPolyLine* CPolyLine::Fillet( unsigned int aRadius, unsigned int aSegments )
{
CPolyLine* newPoly = new CPolyLine;
if( !aRadius )
{
newPoly->Copy( this );
return newPoly;
}
int polycount = GetContoursCount();
for( int contour = 0; contour < polycount; contour++ )
{
unsigned int startIndex = GetContourStart( contour );
unsigned int endIndex = GetContourEnd( contour );
for( unsigned int index = startIndex; index <= endIndex; index++ )
{
int x1, y1; // Current vertex
long long xa, ya; // Previous vertex
long long xb, yb; // Next vertex
double nx, ny;
x1 = m_CornersList[index].x;
y1 = m_CornersList[index].y;
if( index == startIndex )
{
xa = m_CornersList[endIndex].x - x1;
ya = m_CornersList[endIndex].y - y1;
}
else
{
xa = m_CornersList[index - 1].x - x1;
ya = m_CornersList[index - 1].y - y1;
}
if( index == endIndex )
{
xb = m_CornersList[startIndex].x - x1;
yb = m_CornersList[startIndex].y - y1;
}
else
{
xb = m_CornersList[index + 1].x - x1;
yb = m_CornersList[index + 1].y - y1;
}
double lena = hypot( xa, ya );
double lenb = hypot( xb, yb );
double cosine = ( xa * xb + ya * yb ) / ( lena * lenb );
double radius = aRadius;
double denom = sqrt( 2.0 / ( 1 + cosine ) - 1 );
// Do nothing in case of parallel edges
if( std::isinf( denom ) )
continue;
// Limit rounding distance to one half of an edge
if( 0.5 * lena * denom < radius )
radius = 0.5 * lena * denom;
if( 0.5 * lenb * denom < radius )
radius = 0.5 * lenb * denom;
// Calculate fillet arc absolute center point (xc, yx)
double k = radius / sqrt( .5 * ( 1 - cosine ) );
double lenab = sqrt( ( xa / lena + xb / lenb ) * ( xa / lena + xb / lenb ) +
( ya / lena + yb / lenb ) * ( ya / lena + yb / lenb ) );
double xc = x1 + k * ( xa / lena + xb / lenb ) / lenab;
double yc = y1 + k * ( ya / lena + yb / lenb ) / lenab;
// Calculate arc start and end vectors
k = radius / sqrt( 2 / ( 1 + cosine ) - 1 );
double xs = x1 + k * xa / lena - xc;
double ys = y1 + k * ya / lena - yc;
double xe = x1 + k * xb / lenb - xc;
double ye = y1 + k * yb / lenb - yc;
// Cosine of arc angle
double argument = ( xs * xe + ys * ye ) / ( radius * radius );
if( argument < -1 ) // Just in case...
argument = -1;
else if( argument > 1 )
argument = 1;
double arcAngle = acos( argument );
// Calculate the number of segments
double tempSegments = (double) aSegments * ( arcAngle / ( 2 * M_PI ) );
if( tempSegments - (int) tempSegments > 0 )
tempSegments++;
unsigned int segments = (unsigned int) tempSegments;
double deltaAngle = arcAngle / segments;
double startAngle = atan2( -ys, xs );
// Flip arc for inner corners
if( xa * yb - ya * xb <= 0 )
deltaAngle *= -1;
nx = xc + xs;
ny = yc + ys;
if( index == startIndex )
newPoly->Start( GetLayer(), KiROUND( nx ), KiROUND( ny ), GetHatchStyle() );
else
newPoly->AppendCorner( KiROUND( nx ), KiROUND( ny ) );
for( unsigned int j = 0; j < segments; j++ )
{
nx = xc + cos( startAngle + (j + 1) * deltaAngle ) * radius;
ny = yc - sin( startAngle + (j + 1) * deltaAngle ) * radius;
newPoly->AppendCorner( KiROUND( nx ), KiROUND( ny ) );
}
}
newPoly->CloseLastContour();
}
return newPoly;
}
// test to see if a point is inside polyline contour
//
BOOL CPolyLine::TestPointInsideContour( int icont, int x, int y )
{
if( icont >= GetNumContours() )
return FALSE;
enum { MAXPTS = 100 };
if( !GetClosed() )
ASSERT(0);
// define line passing through (x,y), with slope = 2/3;
// get intersection points
double xx[MAXPTS], yy[MAXPTS];
double slope = (double)2.0/3.0;
double a = y - slope*x;
int nloops = 0;
int npts;
// make this a loop so if my homebrew algorithm screws up, we try it again
do
{
// now find all intersection points of line with polyline sides
npts = 0;
int istart = GetContourStart( icont );
int iend = GetContourEnd( icont );
for( int ic=istart; ic<=iend; ic++ )
{
double x, y, x2, y2;
int ok;
if( ic == istart )
ok = FindLineSegmentIntersection( a, slope,
corner[iend].x, corner[iend].y,
corner[istart].x, corner[istart].y,
side_style[m_ncorners-1],
&x, &y, &x2, &y2 );
else
ok = FindLineSegmentIntersection( a, slope,
corner[ic-1].x, corner[ic-1].y,
corner[ic].x, corner[ic].y,
side_style[ic-1],
&x, &y, &x2, &y2 );
if( ok )
{
xx[npts] = (int)x;
yy[npts] = (int)y;
npts++;
ASSERT( npts<MAXPTS ); // overflow
}
if( ok == 2 )
{
xx[npts] = (int)x2;
yy[npts] = (int)y2;
npts++;
ASSERT( npts<MAXPTS ); // overflow
}
}
nloops++;
a += PCBU_PER_MIL/100;
} while( npts%2 != 0 && nloops < 3 );
ASSERT( npts%2==0 ); // odd number of intersection points, error
// count intersection points to right of (x,y), if odd (x,y) is inside polyline
int ncount = 0;
for( int ip=0; ip<npts; ip++ )
{
if( xx[ip] == x && yy[ip] == y )
return FALSE; // (x,y) is on a side, call it outside
else if( xx[ip] > x )
ncount++;
}
if( ncount%2 )
return TRUE;
else
return FALSE;
}
int CPolyLine::GetContourSize( int icont )
{
return GetContourEnd(icont) - GetContourStart(icont) + 1;
}
