/*
==========================================================================
Description:
Process the received ProbeRequest from clients
Parameters:
Elem - msg containing the ProbeReq frame
==========================================================================
*/
VOID APPeerProbeReqAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
UCHAR Addr2[MAC_ADDR_LEN];
CHAR Ssid[MAX_LEN_OF_SSID];
UCHAR SsidLen;
HEADER_802_11 ProbeRspHdr;
NDIS_STATUS NStatus;
PUCHAR pOutBuffer = NULL;
ULONG FrameLen = 0, TmpLen;
LARGE_INTEGER FakeTimestamp;
UCHAR DsLen = 1;
UCHAR ErpIeLen = 1;
UCHAR apidx = 0, PhyMode, SupRateLen;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
BOOLEAN bRequestRssi=FALSE;
#ifdef WSC_AP_SUPPORT
UCHAR Addr3[MAC_ADDR_LEN];
PFRAME_802_11 pFrame = (PFRAME_802_11)Elem->Msg;
COPY_MAC_ADDR(Addr3, pFrame->Hdr.Addr3);
#endif /* WSC_AP_SUPPORT */
#ifdef WDS_SUPPORT
/* if in bridge mode, no need to reply probe req. */
if (pAd->WdsTab.Mode == WDS_BRIDGE_MODE)
return;
#endif /* WDS_SUPPORT */
if (! PeerProbeReqSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, Ssid, &SsidLen, &bRequestRssi))
return;
for(apidx=0; apidx<pAd->ApCfg.BssidNum; apidx++)
{
RSNIe = IE_WPA;
if ((pAd->ApCfg.MBSSID[apidx].MSSIDDev != NULL) &&
!(RTMP_OS_NETDEV_STATE_RUNNING(pAd->ApCfg.MBSSID[apidx].MSSIDDev)))
{
/* the interface is down, so we can not send probe response */
continue;
}
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (((SsidLen == 0) && (! pAd->ApCfg.MBSSID[apidx].bHideSsid)) ||
#ifdef WSC_AP_SUPPORT
/* buffalo WPS testbed STA send ProbrRequest ssid length = 32 and ssid are not AP , but DA are AP. for WPS test send ProbeResponse */
((SsidLen == 32) && MAC_ADDR_EQUAL(Addr3, pAd->ApCfg.MBSSID[apidx].Bssid) && (pAd->ApCfg.MBSSID[apidx].bHideSsid == 0)) ||
#endif /* WSC_AP_SUPPORT */
((SsidLen == pAd->ApCfg.MBSSID[apidx].SsidLen) && NdisEqualMemory(Ssid, pAd->ApCfg.MBSSID[apidx].Ssid, (ULONG) SsidLen)))
;
else
continue; /* check next BSS */
#ifdef RT_CFG80211_SUPPORT
if (pAd->Cfg80211RegisterProbeReqFrame)
{
UINT32 freq;
MAP_CHANNEL_ID_TO_KHZ(Elem->Channel, freq);
freq /= 1000;
CFG80211OS_RxMgmt(pAd->ApCfg.MBSSID[apidx].MSSIDDev, freq, (PUCHAR)Elem->Msg, Elem->MsgLen);
}
#endif /* RT_CFG80211_SUPPORT */
#ifdef BAND_STEERING
BND_STRG_CHECK_CONNECTION_REQ( pAd,
NULL,
Addr2,
Elem->MsgType,
Elem->Rssi0,
Elem->Rssi1,
Elem->Rssi2,
NULL);
#endif /* BAND_STEERING */
/* allocate and send out ProbeRsp frame */
NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
if (NStatus != NDIS_STATUS_SUCCESS)
return;
MgtMacHeaderInit(pAd, &ProbeRspHdr, SUBTYPE_PROBE_RSP, 0, Addr2,
pAd->ApCfg.MBSSID[apidx].Bssid);
if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA) ||
(pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2) ||
(pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
#ifdef WAPI_SUPPORT
else if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWAICERT) ||
(pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWAIPSK))
RSNIe = IE_WAPI;
#endif /* WAPI_SUPPORT */
{
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pOutBuffer, &FrameLen,
sizeof(HEADER_802_11), &ProbeRspHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &pAd->ApCfg.MBSSID[apidx].SsidLen,
pAd->ApCfg.MBSSID[apidx].SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
}
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &ErpIe,
1, &ErpIeLen,
1, &pAd->ApCfg.ErpIeContent,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(pAd->ApCfg.MBSSID[apidx].DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, AddHtLen, NewExtLen;
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.bExtChannelSwitchAnnouncement && (pAd->CommonCfg.Channel > 14))
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE), &HtExtChannelSwitchIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* A_BAND_SUPPORT */
HtLen = sizeof(pAd->CommonCfg.HtCapability);
AddHtLen = sizeof(pAd->CommonCfg.AddHTInfo);
NewExtLen = 1;
/*New extension channel offset IE is included in Beacon, Probe Rsp or channel Switch Announcement Frame */
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
sizeof(HT_CAPABILITY_IE), &pAd->CommonCfg.HtCapability,
1, &AddHtInfoIe,
1, &AddHtLen,
sizeof(ADD_HT_INFO_IE), &pAd->CommonCfg.AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = cpu2le16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pAd->CommonCfg.AddHTInfo, AddHtLen);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &AddHtLen,
AddHtLen, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
#endif /* DOT11_N_SUPPORT */
/* Append RSN_IE when WPA OR WPAPSK, */
if (pAd->ApCfg.MBSSID[apidx].AuthMode < Ndis802_11AuthModeWPA)
; /* enough information */
else if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &RSNIe,
1, &pAd->ApCfg.MBSSID[apidx].RSNIE_Len[0],
pAd->ApCfg.MBSSID[apidx].RSNIE_Len[0], pAd->ApCfg.MBSSID[apidx].RSN_IE[0],
1, &RSNIe2,
1, &pAd->ApCfg.MBSSID[apidx].RSNIE_Len[1],
pAd->ApCfg.MBSSID[apidx].RSNIE_Len[1], pAd->ApCfg.MBSSID[apidx].RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else
{
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &RSNIe,
1, &pAd->ApCfg.MBSSID[apidx].RSNIE_Len[0],
pAd->ApCfg.MBSSID[apidx].RSNIE_Len[0], pAd->ApCfg.MBSSID[apidx].RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add WMM IE here */
if (pAd->ApCfg.MBSSID[apidx].bWmmCapable)
{
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &pAd->ApCfg.MBSSID[apidx].UapsdInfo);
#endif /* UAPSD_SUPPORT */
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(pAd->ApCfg.BssEdcaParm.Aifsn[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->FlgQloadEnable != 0)
{
FrameLen += QBSS_LoadElementAppend(pAd, pOutBuffer+FrameLen);
}
#endif /* AP_QLOAD_SUPPORT */
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen2=0;
UCHAR *TmpFrame = NULL;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
ULONG TmpLen = 0;
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE */
if (WMODE_CAP_N(PhyMode) &&
(pAd->CommonCfg.Channel <= 14) &&
(pAd->ApCfg.MBSSID[apidx].DesiredHtPhyInfo.bHtEnable) &&
(pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pAd->CommonCfg.Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pAd->CommonCfg.Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pAd->CommonCfg.Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pAd->CommonCfg.Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pAd->CommonCfg.Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pAd->CommonCfg.Dot11OBssScanActivityThre);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen;
EXT_CAP_INFO_ELEMENT extCapInfo;
UCHAR extInfoLen;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pAd->CommonCfg.Channel <= 14) &&
(pAd->ApCfg.MBSSID[apidx].DesiredHtPhyInfo.bHtEnable) &&
(pAd->CommonCfg.bBssCoexEnable == TRUE))
{
extCapInfo.BssCoexistMgmtSupport = 1;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
/*
add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back
Byte0.b3=1 for rssi-feedback
*/
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pAd->CommonCfg.bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pAd->CommonCfg.bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
#ifdef RSSI_FEEDBACK
if (bRequestRssi == TRUE)
{
MAC_TABLE_ENTRY *pEntry=NULL;
DBGPRINT(RT_DEBUG_ERROR, ("SYNC - Send PROBE_RSP to %02x:%02x:%02x:%02x:%02x:%02x...\n",
PRINT_MAC(Addr2)));
RalinkSpecificIe[5] |= 0x8;
pEntry = MacTableLookup(pAd, Addr2);
if (pEntry != NULL)
{
RalinkSpecificIe[6] = (UCHAR)pEntry->RssiSample.AvgRssi0;
RalinkSpecificIe[7] = (UCHAR)pEntry->RssiSample.AvgRssi1;
RalinkSpecificIe[8] = (UCHAR)pEntry->RssiSample.AvgRssi2;
}
}
#endif /* RSSI_FEEDBACK */
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef A_BAND_SUPPORT
/* add Channel switch announcement IE */
if ((pAd->CommonCfg.Channel > 14)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
UCHAR CSAIe=IE_CHANNEL_SWITCH_ANNOUNCEMENT;
UCHAR CSALen=3;
UCHAR CSAMode=1;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &CSAIe,
1, &CSALen,
1, &CSAMode,
1, &pAd->CommonCfg.Channel,
1, &pAd->Dot11_H.CSCount,
END_OF_ARGS);
FrameLen += TmpLen;
#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE), &HtExtChannelSwitchIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11_N_SUPPORT */
}
#endif /* A_BAND_SUPPORT */
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen2=0;
UCHAR TmpFrame[256];
UCHAR CountryIe = IE_COUNTRY;
UCHAR MaxTxPower=16;
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include
a Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (pAd->CommonCfg.Channel > 14 && pAd->CommonCfg.bIEEE80211H == TRUE)
{
/* prepare power constraint IE */
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
3, PowerConstraintIE,
END_OF_ARGS);
FrameLen += TmpLen;
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
ULONG TmpLen;
UINT8 vht_txpwr_env_ie = IE_VHT_TXPWR_ENV;
UINT8 ie_len;
VHT_TXPWR_ENV_IE txpwr_env;
ie_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &vht_txpwr_env_ie,
1, &ie_len,
ie_len, &txpwr_env,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11_VHT_AC */
}
#endif /* A_BAND_SUPPORT */
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
/* prepare channel information */
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
}/* Country IE - */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(pAd->ApCfg.MBSSID[apidx].DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, AddHtLen;/*, NewExtLen; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
HtLen = sizeof(pAd->CommonCfg.HtCapability);
AddHtLen = sizeof(pAd->CommonCfg.AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pAd->CommonCfg.HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = cpu2le16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = AddHtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
AddHtLen, &pAd->CommonCfg.AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pAd->CommonCfg.AddHTInfo, AddHtLen);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
AddHtLen, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) &&
(pAd->CommonCfg.Channel > 14)) {
FrameLen += build_vht_ies(pAd, (UCHAR *)(pOutBuffer+FrameLen), SUBTYPE_PROBE_RSP, pAd->CommonCfg.vht_max_mcs_cap);
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
#ifdef WSC_AP_SUPPORT
/* for windows 7 logo test */
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif /* DOT1X_SUPPORT */
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen1 = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pOutBuffer+FrameLen, &TempLen1,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen1;
}
/* add Simple Config Information Element */
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode > WSC_DISABLE) && (pAd->ApCfg.MBSSID[apidx].WscIEProbeResp.ValueLen))
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pOutBuffer+FrameLen, &WscTmpLen,
pAd->ApCfg.MBSSID[apidx].WscIEProbeResp.ValueLen, pAd->ApCfg.MBSSID[apidx].WscIEProbeResp.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
#endif /* WSC_AP_SUPPORT */
#ifdef RT_CFG80211_SUPPORT
if (pAd->ApCfg.MBSSID[apidx].ProbRespExtraIeLen != 0)
{
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
pAd->ApCfg.MBSSID[apidx].ProbRespExtraIeLen, &pAd->ApCfg.MBSSID[apidx].ProbRespExtraIe[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* RT_CFG80211_SUPPORT */
/* 802.11n 11.1.3.2.2 active scanning. sending probe response with MCS rate is */
MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
MlmeFreeMemory(pAd, pOutBuffer);
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pAd->ApCfg.MBSSID[apidx].Bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Update the BEACON frame in the shared memory. Because TIM IE is variable
length. other IEs after TIM has to shift and total frame length may change
for each BEACON period.
Output:
pAd->ApCfg.MBSSID[apidx].CapabilityInfo
pAd->ApCfg.ErpIeContent
==========================================================================
*/
VOID APUpdateBeaconFrame(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR *pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
ULONG FrameLen = pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon;
ULONG UpdatePos = pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
UCHAR ID_1B, TimFirst, TimLast, *pTim;
MULTISSID_STRUCT *pMbss;
COMMON_CONFIG *pComCfg;
UCHAR PhyMode;
BOOLEAN bHasWpsIE = FALSE;
UINT i;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
pMbss = &pAd->ApCfg.MBSSID[apidx];
pComCfg = &pAd->CommonCfg;
PhyMode = pMbss->PhyMode;
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
/*
step 1 - update BEACON's Capability
*/
ptr = pBeaconFrame + pMbss->CapabilityInfoLocationInBeacon;
*ptr = (UCHAR)(pMbss->CapabilityInfo & 0x00ff);
*(ptr+1) = (UCHAR)((pMbss->CapabilityInfo & 0xff00) >> 8);
/*
step 2 - update TIM IE
TODO: enlarge TIM bitmap to support up to 64 STAs
TODO: re-measure if RT2600 TBTT interrupt happens faster than BEACON sent out time
*/
ptr = pBeaconFrame + pMbss->TimIELocationInBeacon;
*ptr = IE_TIM;
*(ptr + 2) = pAd->ApCfg.DtimCount;
*(ptr + 3) = pAd->ApCfg.DtimPeriod;
/* find the smallest AID (PS mode) */
TimFirst = 0; /* record first TIM byte != 0x00 */
TimLast = 0; /* record last TIM byte != 0x00 */
pTim = pMbss->TimBitmaps;
for(ID_1B=0; ID_1B<WLAN_MAX_NUM_OF_TIM; ID_1B++)
{
/* get the TIM indicating PS packets for 8 stations */
UCHAR tim_1B = pTim[ID_1B];
if (ID_1B == 0)
tim_1B &= 0xfe; /* skip bit0 bc/mc */
if (tim_1B == 0)
continue; /* find next 1B */
if (TimFirst == 0)
TimFirst = ID_1B;
TimLast = ID_1B;
}
/* fill TIM content to beacon buffer */
if (TimFirst & 0x01)
TimFirst --; /* find the even offset byte */
*(ptr + 1) = 3+(TimLast-TimFirst+1); /* TIM IE length */
*(ptr + 4) = TimFirst;
for(i=TimFirst; i<=TimLast; i++)
*(ptr + 5 + i - TimFirst) = pTim[i];
/* bit0 means backlogged mcast/bcast */
if (pAd->ApCfg.DtimCount == 0)
*(ptr + 4) |= (pMbss->TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] & 0x01);
/* adjust BEACON length according to the new TIM */
FrameLen += (2 + *(ptr+1));
#ifdef HOSTAPD_SUPPORT
if ( pAd->ApCfg.MBSSID[apidx].HostapdWPS && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen))
bHasWpsIE = TRUE;
#endif
#ifdef WSC_AP_SUPPORT
/* add Simple Config Information Element */
if (((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode >= 1) && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen)))
{
bHasWpsIE = TRUE;
}
#endif /* WSC_AP_SUPPORT */
if (bHasWpsIE)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen, pAd->ApCfg.MBSSID[apidx].WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
#ifdef WSC_AP_SUPPORT
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif /* DOT1X_SUPPORT */
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http:msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif /* WSC_AP_SUPPORT */
/* Update ERP */
if ((pComCfg->ExtRateLen) && (PhyMode != WMODE_B))
{
/* fill ERP IE */
ptr = (UCHAR *)pBeaconFrame + FrameLen; /* pTxD->DataByteCnt; */
*ptr = IE_ERP;
*(ptr + 1) = 1;
*(ptr + 2) = pAd->ApCfg.ErpIeContent;
FrameLen += 3;
}
#ifdef A_BAND_SUPPORT
/* fill up Channel Switch Announcement Element */
if ((pComCfg->Channel > 14)
&& (pComCfg->bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
ptr = pBeaconFrame + FrameLen;
*ptr = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
*(ptr + 1) = 3;
*(ptr + 2) = 1;
*(ptr + 3) = pComCfg->Channel;
*(ptr + 4) = (pAd->Dot11_H.CSPeriod - pAd->Dot11_H.CSCount - 1);
ptr += 5;
FrameLen += 5;
#ifdef DOT11_N_SUPPORT
/* Extended Channel Switch Announcement Element */
if (pComCfg->bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
NdisMoveMemory(ptr, &HtExtChannelSwitchIe, sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE));
ptr += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
FrameLen += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
}
#endif /* DOT11_N_SUPPORT */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* step 5. Update HT. Since some fields might change in the same BSS. */
if (WMODE_CAP_N(PhyMode) && (pMbss->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2; // no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &pComCfg->HtCapability,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
#ifdef DOT11N_DRAFT3
/*
P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE
*/
if ((pComCfg->Channel <= 14) &&
(pComCfg->HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pComCfg->Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pComCfg->Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pComCfg->Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pComCfg->Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pComCfg->Dot11OBssScanActivityThre);
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11N_DRAFT3 */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) && (pComCfg->Channel > 14))
{
int _len = build_vht_ies(pAd, (UCHAR *)(pBeaconFrame+FrameLen), SUBTYPE_BEACON);
FrameLen += _len;
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
#if defined(DOT11N_DRAFT3) || defined(DOT11V_WNM_SUPPORT)
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen, infoPos;
PUCHAR pInfo;
UCHAR extInfoLen;
BOOLEAN bNeedAppendExtIE = FALSE;
EXT_CAP_INFO_ELEMENT extCapInfo;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pComCfg->Channel <= 14) &&
(pMbss->DesiredHtPhyInfo.bHtEnable) &&
(pComCfg->bBssCoexEnable == TRUE)
)
{
extCapInfo.BssCoexistMgmtSupport = 1;
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
pInfo = (PUCHAR)(&extCapInfo);
for (infoPos = 0; infoPos < extInfoLen; infoPos++)
{
if (pInfo[infoPos] != 0)
{
bNeedAppendExtIE = TRUE;
break;
}
}
if (bNeedAppendExtIE == TRUE)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* defined(DOT11N_DRAFT3) || defined(DOT11V_WNM_SUPPORT) */
if ((pMbss->AuthMode == Ndis802_11AuthModeWPA) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((pMbss->AuthMode == Ndis802_11AuthModeWPA2) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
#ifdef WAPI_SUPPORT
else if ((pMbss->AuthMode == Ndis802_11AuthModeWAICERT) ||
(pMbss->AuthMode == Ndis802_11AuthModeWAIPSK))
RSNIe = IE_WAPI;
#endif /* WAPI_SUPPORT */
/* Append RSN_IE when WPA OR WPAPSK, */
if ((pMbss->AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
1, &RSNIe2,
1, &pMbss->RSNIE_Len[1],
pMbss->RSNIE_Len[1], pMbss->RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else if (pMbss->AuthMode >= Ndis802_11AuthModeWPA)
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add WMM IE here */
if (pMbss->bWmmCapable)
{
ULONG TmpLen;
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
UINT8 AIFSN[4];
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &pMbss->UapsdInfo);
#endif /* UAPSD_SUPPORT */
NdisMoveMemory(AIFSN, pAd->ApCfg.BssEdcaParm.Aifsn, sizeof(AIFSN));
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(AIFSN[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->FlgQloadEnable != 0)
{
FrameLen += QBSS_LoadElementAppend(pAd, pBeaconFrame+FrameLen);
}
#endif /* AP_QLOAD_SUPPORT */
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include a
Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (((pComCfg->Channel > 14) && pComCfg->bIEEE80211H == TRUE)
)
{
ULONG TmpLen;
UINT8 PwrConstraintIE = IE_POWER_CONSTRAINT;
UINT8 PwrConstraintLen = 1;
UINT8 PwrConstraint = pComCfg->PwrConstraint;
/* prepare power constraint IE */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &PwrConstraintIE,
1, &PwrConstraintLen,
1, &PwrConstraint,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(pMbss->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2;*/ /* no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pComCfg->HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = HtLen1 + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
/* add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back */
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pComCfg->bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pComCfg->bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pComCfg->bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* step 6. Since FrameLen may change, update TXWI. */
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.Channel > 14) {
BeaconTransmit.field.MODE = MODE_OFDM;
BeaconTransmit.field.MCS = MCS_RATE_6;
}
#endif /* A_BAND_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, 0xff,
FrameLen, PID_MGMT, QID_MGMT, 0, IFS_HTTXOP, FALSE, &BeaconTransmit);
/* step 7. move BEACON TXWI and frame content to on-chip memory */
RT28xx_UpdateBeaconToAsic(pAd, apidx, FrameLen, UpdatePos);
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(
IN PRTMP_ADAPTER pAd,
IN INT apidx)
{
UCHAR DsLen = 1, SsidLen;//, TimLen = 4,
//BitmapControl = 0, VirtualBitmap = 0, EmptySsidLen = 0, SsidLen;
// UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue;
HTTRANSMIT_SETTING BeaconTransmit; // MGMT frame PHY rate setting when operatin at Ht rate.
UCHAR PhyMode, SupRateLen;
#ifdef SPECIFIC_BCN_BUF_SUPPORT
unsigned long irqFlag = 0;
#endif // SPECIFIC_BCN_BUF_SUPPORT //
BOOLEAN bHasWpsIE = FALSE;
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR, pAd->ApCfg.MBSSID[apidx].Bssid);
// for update framelen to TxWI later.
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == PHY_11B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != PHY_11B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
// add country IE, power constraint IE
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR TmpFrame[256];
UCHAR CountryIe = IE_COUNTRY;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
// prepare channel information
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif // EXT_BUILD_CHANNEL_LIST //
// need to do the padding bit check, and concatenate it
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
}
#ifdef DOT11_N_SUPPORT
// AP Channel Report
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
// 802.11n D2.0 Annex J
// USA
// regulatory class 32, channel set 1~7
// regulatory class 33, channel set 5-11
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; //sizeof(rclass32);
if (PhyMode == PHY_11BGN_MIXED)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif // DOT11_N_SUPPORT //
#ifdef WSC_AP_SUPPORT
// add Simple Config Information Element
if (((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode >= 1) && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen)))
{
bHasWpsIE = TRUE;
}
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif // DOT1X_SUPPORT //
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif // WSC_AP_SUPPORT //
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
//
// step 6. move BEACON TXD and frame content to on-chip memory
//
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(ptr, TYPE_TXWI);
#endif
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (higher 8KB shared memory)
*/
if (pAd->BcnCB.bHighShareMemSupport == 1)
RTMP_MAC_SHR_MSEL_LOCK(pAd, HIGHER_SHRMEM, irqFlag);
#endif // SPECIFIC_BCN_BUF_SUPPORT //
for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + i, longValue);
ptr += 4;
}
// update BEACON frame content. start right after the 16-byte TXWI field.
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWI_SIZE + i, longValue);
ptr += 4;
}
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (lower 16KB shared memory)
*/
if (pAd->BcnCB.bHighShareMemSupport == 1)
RTMP_MAC_SHR_MSEL_UNLOCK(pAd, LOWER_SHRMEM, irqFlag);
#endif // SPECIFIC_BCN_BUF_SUPPORT //
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Process the received ProbeRequest from clients
Parameters:
Elem - msg containing the ProbeReq frame
==========================================================================
*/
VOID APPeerProbeReqAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
UCHAR Addr2[MAC_ADDR_LEN];
CHAR Ssid[MAX_LEN_OF_SSID];
UCHAR SsidLen; //, Rates[MAX_LEN_OF_SUPPORTED_RATES], RatesLen;
HEADER_802_11 ProbeRspHdr;
NDIS_STATUS NStatus;
PUCHAR pOutBuffer = NULL;
ULONG FrameLen = 0, TmpLen;
LARGE_INTEGER FakeTimestamp;
UCHAR DsLen = 1;//, IbssLen = 2, TimLen=1,
//BitmapControl=0, VirtualBitmap=0;
UCHAR ErpIeLen = 1;
UCHAR apidx = 0;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;//, RSN_Len=22;
BOOLEAN bRequestRssi=FALSE;
#ifdef WSC_AP_SUPPORT
UCHAR Addr3[MAC_ADDR_LEN];
PFRAME_802_11 pFrame = (PFRAME_802_11)Elem->Msg;
COPY_MAC_ADDR(Addr3, pFrame->Hdr.Addr3);
#endif // WSC_AP_SUPPORT //
#ifdef WDS_SUPPORT
// if in bridge mode, no need to reply probe req.
if (pAd->WdsTab.Mode == WDS_BRIDGE_MODE)
return;
#endif // WDS_SUPPORT //
if (! PeerProbeReqSanity(pAd, Elem->Msg, Elem->MsgLen, Addr2, Ssid, &SsidLen, &bRequestRssi))
return;
for(apidx=0; apidx<pAd->ApCfg.BssidNum; apidx++)
{
RSNIe = IE_WPA;
if ((pAd->ApCfg.MBSSID[apidx].MSSIDDev != NULL) &&
!(RTMP_OS_NETDEV_STATE_RUNNING(pAd->ApCfg.MBSSID[apidx].MSSIDDev)))
{
/* the interface is down, so we can not send probe response */
continue;
} /* End of if */
if (((SsidLen == 0) && (! pAd->ApCfg.MBSSID[apidx].bHideSsid)) ||
#ifdef WSC_AP_SUPPORT
/* buffalo WPS testbed STA send ProbrRequest ssid length = 32 and ssid are not AP , but DA are AP. for WPS test send ProbeResponse */
((SsidLen == 32) && MAC_ADDR_EQUAL(Addr3, pAd->ApCfg.MBSSID[apidx].Bssid) && (pAd->ApCfg.MBSSID[apidx].bHideSsid == 0)) ||
#endif // WSC_AP_SUPPORT //
((SsidLen == pAd->ApCfg.MBSSID[apidx].SsidLen) && NdisEqualMemory(Ssid, pAd->ApCfg.MBSSID[apidx].Ssid, (ULONG) SsidLen)))
;
else
continue; /* check next BSS */
// allocate and send out ProbeRsp frame
NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
if (NStatus != NDIS_STATUS_SUCCESS)
return;
MgtMacHeaderInit(pAd, &ProbeRspHdr, SUBTYPE_PROBE_RSP, 0, Addr2, pAd->ApCfg.MBSSID[apidx].Bssid);
if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA) ||
(pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2) ||
(pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
#ifdef WAPI_SUPPORT
else if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWAICERT) ||
(pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWAIPSK))
RSNIe = IE_WAPI;
#endif // WAPI_SUPPORT //
MakeOutgoingFrame(pOutBuffer, &FrameLen,
sizeof(HEADER_802_11), &ProbeRspHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &pAd->ApCfg.MBSSID[apidx].SsidLen,
pAd->ApCfg.MBSSID[apidx].SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &pAd->CommonCfg.SupRateLen,
pAd->CommonCfg.SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if (pAd->CommonCfg.ExtRateLen)
{
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &ErpIe,
1, &ErpIeLen,
1, &pAd->ApCfg.ErpIeContent,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef A_BAND_SUPPORT
// add Channel switch announcement IE
if ((pAd->CommonCfg.Channel > 14)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->CommonCfg.RadarDetect.RDMode == RD_SWITCHING_MODE))
{
UCHAR CSAIe=IE_CHANNEL_SWITCH_ANNOUNCEMENT;
UCHAR CSALen=3;
UCHAR CSAMode=1;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &CSAIe,
1, &CSALen,
1, &CSAMode,
1, &pAd->CommonCfg.Channel,
1, &pAd->CommonCfg.RadarDetect.CSCount,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif // A_BAND_SUPPORT //
#ifdef DOT11_N_SUPPORT
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
(pAd->ApCfg.MBSSID[apidx].DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, AddHtLen, NewExtLen;
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.bExtChannelSwitchAnnouncement && (pAd->CommonCfg.Channel > 14))
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE), &HtExtChannelSwitchIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif // A_BAND_SUPPORT //
HtLen = sizeof(pAd->CommonCfg.HtCapability);
AddHtLen = sizeof(pAd->CommonCfg.AddHTInfo);
NewExtLen = 1;
//New extension channel offset IE is included in Beacon, Probe Rsp or channel Switch Announcement Frame
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
sizeof(HT_CAPABILITY_IE), &pAd->CommonCfg.HtCapability,
1, &AddHtInfoIe,
1, &AddHtLen,
sizeof(ADD_HT_INFO_IE), &pAd->CommonCfg.AddHTInfo,
1, &NewExtChanIe,
1, &NewExtLen,
sizeof(NEW_EXT_CHAN_IE), &pAd->CommonCfg.NewExtChanOffset,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = cpu2le16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif // UNALIGNMENT_SUPPORT //
NdisMoveMemory(&addHTInfoTmp, &pAd->CommonCfg.AddHTInfo, AddHtLen);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &AddHtLen,
AddHtLen, &addHTInfoTmp,
1, &NewExtChanIe,
1, &NewExtLen,
sizeof(NEW_EXT_CHAN_IE), &pAd->CommonCfg.NewExtChanOffset,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
#endif // DOT11_N_SUPPORT //
// Append RSN_IE when WPA OR WPAPSK,
if (pAd->ApCfg.MBSSID[apidx].AuthMode < Ndis802_11AuthModeWPA)
; // enough information
else if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &RSNIe,
1, &pAd->ApCfg.MBSSID[apidx].RSNIE_Len[0],
pAd->ApCfg.MBSSID[apidx].RSNIE_Len[0], pAd->ApCfg.MBSSID[apidx].RSN_IE[0],
1, &RSNIe2,
1, &pAd->ApCfg.MBSSID[apidx].RSNIE_Len[1],
pAd->ApCfg.MBSSID[apidx].RSNIE_Len[1], pAd->ApCfg.MBSSID[apidx].RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else
{
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &RSNIe,
1, &pAd->ApCfg.MBSSID[apidx].RSNIE_Len[0],
pAd->ApCfg.MBSSID[apidx].RSNIE_Len[0], pAd->ApCfg.MBSSID[apidx].RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
// add WMM IE here
if (pAd->ApCfg.MBSSID[apidx].bWmmCapable)
{
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_AP_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], pAd);
#endif // UAPSD_AP_SUPPORT //
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + // b5-6 is ACI
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + // b4 is ACM
(pAd->ApCfg.BssEdcaParm.Aifsn[i] & 0x0f); // b0-3 is AIFSN
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + // b5-8 is CWMAX
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); // b0-3 is CWMIN
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); // low byte of TXOP
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); // high byte of TXOP
}
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->FlgQloadEnable != 0)
{
FrameLen += QBSS_LoadElementAppend(pAd, pOutBuffer+FrameLen);
}
#endif // AP_QLOAD_SUPPORT //
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx))
{
// add country IE, power constraint IE
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR TmpFrame[256];
UCHAR CountryIe = IE_COUNTRY;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
// prepare channel information
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif // EXT_BUILD_CHANNEL_LIST //
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx)
&& (pAd->CommonCfg.RegulatoryClass[0] != 0))
{
TmpLen2 = 0;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
RguClass_BuildBcnChList(pAd, TmpFrame, &TmpLen2);
}
#endif // DOT11K_RRM_SUPPORT //
// need to do the padding bit check, and concatenate it
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pOutBuffer+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pOutBuffer+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
}
InsertTpcReportIE(pAd, pOutBuffer+FrameLen, &FrameLen,
RTMP_GetTxPwr(pAd, pAd->CommonCfg.MlmeTransmit), 0);
RRM_InsertRRMEnCapIE(pAd, pOutBuffer+FrameLen, &FrameLen, apidx);
}
{
INT loop;
for (loop=0; loop<MAX_NUM_OF_REGULATORY_CLASS; loop++)
{
if (pAd->CommonCfg.RegulatoryClass[loop] == 0)
break;
InsertChannelRepIE(pAd, pOutBuffer+FrameLen, &FrameLen,
(PSTRING)pAd->CommonCfg.CountryCode,
pAd->CommonCfg.RegulatoryClass[loop]);
}
}
/* Insert BSS AC Access Delay IE. */
RRM_InsertBssACDelayIE(pAd, pOutBuffer+FrameLen, &FrameLen);
/* Insert BSS Available Access Capacity IE. */
RRM_InsertBssAvailableACIE(pAd, pOutBuffer+FrameLen, &FrameLen);
#endif // DOT11K_RRM_SUPPORT //
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
// P802.11n_D3.03
// 7.3.2.60 Overlapping BSS Scan Parameters IE
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
(pAd->ApCfg.MBSSID[apidx].DesiredHtPhyInfo.bHtEnable) &&
(pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pAd->CommonCfg.Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pAd->CommonCfg.Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pAd->CommonCfg.Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pAd->CommonCfg.Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pAd->CommonCfg.Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pAd->CommonCfg.Dot11OBssScanActivityThre);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
// 7.3.2.27 Extended Capabilities IE
{
ULONG TmpLen;
EXT_CAP_INFO_ELEMENT extCapInfo;
UCHAR extInfoLen;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
// P802.11n_D1.10
// HT Information Exchange Support
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pAd->CommonCfg.Channel <= 14) &&
(pAd->ApCfg.MBSSID[apidx].DesiredHtPhyInfo.bHtEnable) &&
(pAd->CommonCfg.bBssCoexEnable == TRUE))
{
extCapInfo.BssCoexistMgmtSupport = 1;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif // DOT11N_DRAFT3 //
#endif // DOT11_N_SUPPORT //
/*
add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back
Byte0.b3=1 for rssi-feedback
*/
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pAd->CommonCfg.bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pAd->CommonCfg.bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif // DOT11_N_SUPPORT //
#ifdef RSSI_FEEDBACK
if (bRequestRssi == TRUE)
{
MAC_TABLE_ENTRY *pEntry=NULL;
DBGPRINT(RT_DEBUG_ERROR, ("SYNC - Send PROBE_RSP to %02x:%02x:%02x:%02x:%02x:%02x...\n", Addr2[0],Addr2[1],Addr2[2],Addr2[3],Addr2[4],Addr2[5] ));
RalinkSpecificIe[5] |= 0x8;
pEntry = MacTableLookup(pAd, Addr2);
if (pEntry != NULL)
{
RalinkSpecificIe[6] = (UCHAR)pEntry->RssiSample.AvgRssi0;
RalinkSpecificIe[7] = (UCHAR)pEntry->RssiSample.AvgRssi1;
RalinkSpecificIe[8] = (UCHAR)pEntry->RssiSample.AvgRssi2;
}
}
#endif // RSSI_FEEDBACK //
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef A_BAND_SUPPORT
// add Channel switch announcement IE
if ((pAd->CommonCfg.Channel > 14)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->CommonCfg.RadarDetect.RDMode == RD_SWITCHING_MODE))
{
UCHAR CSAIe=IE_CHANNEL_SWITCH_ANNOUNCEMENT;
UCHAR CSALen=3;
UCHAR CSAMode=1;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &CSAIe,
1, &CSALen,
1, &CSAMode,
1, &pAd->CommonCfg.Channel,
1, &pAd->CommonCfg.RadarDetect.CSCount,
END_OF_ARGS);
FrameLen += TmpLen;
#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE), &HtExtChannelSwitchIe,
END_OF_ARGS);
}
#endif // DOT11_N_SUPPORT //
FrameLen += TmpLen;
}
#endif // A_BAND_SUPPORT //
// add country IE, power constraint IE
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen2=0;
UCHAR TmpFrame[256];
UCHAR CountryIe = IE_COUNTRY;
UCHAR MaxTxPower=16;
#ifdef A_BAND_SUPPORT
// Only 802.11a APs that comply with 802.11h are required to include a Power Constrint Element(IE=32)
// in beacons and probe response frames
if (pAd->CommonCfg.Channel > 14 && pAd->CommonCfg.bIEEE80211H == TRUE)
{
// prepare power constraint IE
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
3, PowerConstraintIE,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif // A_BAND_SUPPORT //
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
// prepare channel information
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
// need to do the padding bit check, and concatenate it
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
}// Country IE -
#ifdef DOT11_N_SUPPORT
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
(pAd->ApCfg.MBSSID[apidx].DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, AddHtLen;//, NewExtLen;
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
HtLen = sizeof(pAd->CommonCfg.HtCapability);
AddHtLen = sizeof(pAd->CommonCfg.AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pAd->CommonCfg.HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = cpu2le16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif // UNALIGNMENT_SUPPORT //
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = AddHtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
AddHtLen, &pAd->CommonCfg.AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pAd->CommonCfg.AddHTInfo, AddHtLen);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
AddHtLen, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
}
#endif // DOT11_N_SUPPORT //
#ifdef WSC_AP_SUPPORT
/* for windows 7 logo test */
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif // DOT1X_SUPPORT //
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen1 = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pOutBuffer+FrameLen, &TempLen1,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen1;
}
// add Simple Config Information Element
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode > WSC_DISABLE) && (pAd->ApCfg.MBSSID[apidx].WscIEProbeResp.ValueLen))
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pOutBuffer+FrameLen, &WscTmpLen,
pAd->ApCfg.MBSSID[apidx].WscIEProbeResp.ValueLen, pAd->ApCfg.MBSSID[apidx].WscIEProbeResp.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
#endif // WSC_AP_SUPPORT //
#ifdef DOT11R_FT_SUPPORT
/* The Mobility Domain information element (MDIE) is present in Probe-
** Request frame when dot11FastBssTransitionEnable is set to true. */
if (pAd->ApCfg.MBSSID[apidx].FtCfg.FtCapFlag.Dot11rFtEnable)
{
PFT_CFG pFtCfg = &pAd->ApCfg.MBSSID[apidx].FtCfg;
FT_CAP_AND_POLICY FtCap;
FtCap.field.FtOverDs = pFtCfg->FtCapFlag.FtOverDs;
FtCap.field.RsrReqCap = pFtCfg->FtCapFlag.RsrReqCap;
FT_InsertMdIE(pAd, pOutBuffer + FrameLen, &FrameLen,
pFtCfg->FtMdId, FtCap);
}
#endif // DOT11R_FT_SUPPORT //
// 802.11n 11.1.3.2.2 active scanning. sending probe response with MCS rate is
MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
MlmeFreeMemory(pAd, pOutBuffer);
}
VOID RRM_EnqueueLinkMeasureReq(
IN PRTMP_ADAPTER pAd,
IN UINT8 Aid,
IN UINT8 apidx)
{
UINT8 DialogToken = RandomByte(pAd);
HEADER_802_11 ActHdr;
PUCHAR pOutBuffer = NULL;
NDIS_STATUS NStatus;
ULONG FrameLen;
PMAC_TABLE_ENTRY pEntry;
if ((apidx >= pAd->ApCfg.BssidNum)
|| (Aid >= MAX_LEN_OF_MAC_TABLE))
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Invalid STA. apidx=%d Aid=%d\n",
__FUNCTION__, apidx, Aid));
return;
}
NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer); /* Get an unused nonpaged memory */
if(NStatus != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_TRACE, ("%s() allocate memory failed \n", __FUNCTION__));
return;
}
pEntry = &pAd->MacTab.Content[Aid];
/* build action frame header. */
MgtMacHeaderInit(pAd, &ActHdr, SUBTYPE_ACTION, 0, pEntry->Addr,
pAd->ApCfg.MBSSID[apidx].wdev.if_addr,
pAd->ApCfg.MBSSID[apidx].wdev.bssid);
NdisMoveMemory(pOutBuffer, (PCHAR)&ActHdr, sizeof(HEADER_802_11));
FrameLen = sizeof(HEADER_802_11);
InsertActField(pAd, (pOutBuffer + FrameLen), &FrameLen,
CATEGORY_RM, RRM_LNK_MEASURE_REQ);
/* fill Dialog Token */
InsertDialogToken(pAd, (pOutBuffer + FrameLen), &FrameLen, DialogToken);
/* fill Tx Power Used field */
{
ULONG TempLen;
UINT8 TxPwr = RTMP_GetTxPwr(pAd, pAd->CommonCfg.MlmeTransmit);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TempLen,
1, &TxPwr,
END_OF_ARGS);
FrameLen += TempLen;
}
/* fill Max Tx Power field */
{
ULONG TempLen;
UINT8 MaxTxPwr = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TempLen,
1, &MaxTxPwr,
END_OF_ARGS);
FrameLen += TempLen;
}
MeasureReqInsert(pAd, DialogToken);
MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
if (pOutBuffer)
MlmeFreeMemory(pAd, pOutBuffer);
return;
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
PhyMode = pMbss->wdev.PhyMode;
if (pMbss->bHideSsid)
SsidLen = 0;
else
SsidLen = pMbss->SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pMbss->wdev.if_addr,
pMbss->wdev.bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pMbss->CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pMbss->Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
BeaconTransmit.word = 0;
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pMbss->BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
pMbss->TimIELocationInBeacon = (UCHAR)FrameLen;
pMbss->CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Update the BEACON frame in the shared memory. Because TIM IE is variable
length. other IEs after TIM has to shift and total frame length may change
for each BEACON period.
Output:
pAd->ApCfg.MBSSID[apidx].CapabilityInfo
pAd->ApCfg.ErpIeContent
==========================================================================
*/
VOID APUpdateBeaconFrame(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR *pBeaconFrame;
UCHAR *ptr;
ULONG FrameLen;
ULONG UpdatePos;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
UCHAR ID_1B, TimFirst, TimLast, *pTim;
MULTISSID_STRUCT *pMbss;
COMMON_CONFIG *pComCfg;
UCHAR PhyMode;
BOOLEAN bHasWpsIE = FALSE;
UINT i;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
struct wifi_dev *wdev;
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
pComCfg = &pAd->CommonCfg;
pMbss = &pAd->ApCfg.MBSSID[apidx];
wdev = &pMbss->wdev;
pBeaconFrame = (UCHAR *)&pMbss->BeaconBuf[0];
FrameLen = UpdatePos = pMbss->TimIELocationInBeacon;
PhyMode = wdev->PhyMode;
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
/*
step 1 - update BEACON's Capability
*/
ptr = pBeaconFrame + pMbss->CapabilityInfoLocationInBeacon;
*ptr = (UCHAR)(pMbss->CapabilityInfo & 0x00ff);
*(ptr+1) = (UCHAR)((pMbss->CapabilityInfo & 0xff00) >> 8);
/*
step 2 - update TIM IE
TODO: enlarge TIM bitmap to support up to 64 STAs
TODO: re-measure if RT2600 TBTT interrupt happens faster than BEACON sent out time
*/
ptr = pBeaconFrame + pMbss->TimIELocationInBeacon;
*ptr = IE_TIM;
*(ptr + 2) = pAd->ApCfg.DtimCount;
*(ptr + 3) = pAd->ApCfg.DtimPeriod;
/* find the smallest AID (PS mode) */
TimFirst = 0; /* record first TIM byte != 0x00 */
TimLast = 0; /* record last TIM byte != 0x00 */
pTim = pMbss->TimBitmaps;
for(ID_1B=0; ID_1B<WLAN_MAX_NUM_OF_TIM; ID_1B++)
{
/* get the TIM indicating PS packets for 8 stations */
UCHAR tim_1B = pTim[ID_1B];
if (ID_1B == 0)
tim_1B &= 0xfe; /* skip bit0 bc/mc */
if (tim_1B == 0)
continue; /* find next 1B */
if (TimFirst == 0)
TimFirst = ID_1B;
TimLast = ID_1B;
}
/* fill TIM content to beacon buffer */
if (TimFirst & 0x01)
TimFirst --; /* find the even offset byte */
*(ptr + 1) = 3+(TimLast-TimFirst+1); /* TIM IE length */
*(ptr + 4) = TimFirst;
for(i=TimFirst; i<=TimLast; i++)
*(ptr + 5 + i - TimFirst) = pTim[i];
/* bit0 means backlogged mcast/bcast */
if (pAd->ApCfg.DtimCount == 0)
*(ptr + 4) |= (pMbss->TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] & 0x01);
/* adjust BEACON length according to the new TIM */
FrameLen += (2 + *(ptr+1));
/* move RSN IE from below to here for Ralink Win7 v3.0.0.61 version parse beacon issue. */
/* sync the order with BRCM's AP. */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA) ||
(wdev->AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((wdev->AuthMode == Ndis802_11AuthModeWPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
/* Append RSN_IE when WPA OR WPAPSK, */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
1, &RSNIe2,
1, &pMbss->RSNIE_Len[1],
pMbss->RSNIE_Len[1], pMbss->RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else if (wdev->AuthMode >= Ndis802_11AuthModeWPA)
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef HOSTAPD_SUPPORT
if (pMbss->HostapdWPS && (pMbss->WscIEBeacon.ValueLen))
bHasWpsIE = TRUE;
#endif
if (bHasWpsIE)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pMbss->WscIEBeacon.ValueLen, pMbss->WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
/* Update ERP */
if ((pComCfg->ExtRateLen) && (PhyMode != WMODE_B))
{
/* fill ERP IE */
ptr = (UCHAR *)pBeaconFrame + FrameLen; /* pTxD->DataByteCnt; */
*ptr = IE_ERP;
*(ptr + 1) = 1;
*(ptr + 2) = pAd->ApCfg.ErpIeContent;
FrameLen += 3;
}
#ifdef A_BAND_SUPPORT
/* fill up Channel Switch Announcement Element */
if ((pComCfg->Channel > 14)
&& (pComCfg->bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
ptr = pBeaconFrame + FrameLen;
*ptr = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
*(ptr + 1) = 3;
*(ptr + 2) = 1;
*(ptr + 3) = pComCfg->Channel;
*(ptr + 4) = (pAd->Dot11_H.CSPeriod - pAd->Dot11_H.CSCount - 1);
ptr += 5;
FrameLen += 5;
#ifdef DOT11_N_SUPPORT
/* Extended Channel Switch Announcement Element */
if (pComCfg->bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
NdisMoveMemory(ptr, &HtExtChannelSwitchIe, sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE));
ptr += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
FrameLen += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
}
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
INT tp_len, wb_len = 0;
UCHAR *ch_sw_wrapper;
VHT_TXPWR_ENV_IE txpwr_env;
*ptr = IE_CH_SWITCH_WRAPPER;
ch_sw_wrapper = (UCHAR *)(ptr + 1); // reserve for length
ptr += 2; // skip len
if (pComCfg->RegTransmitSetting.field.BW == BW_40) {
WIDE_BW_CH_SWITCH_ELEMENT wb_info;
*ptr = IE_WIDE_BW_CH_SWITCH;
*(ptr + 1) = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
ptr += 2;
NdisZeroMemory(&wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
if (pComCfg->vht_bw == VHT_BW_2040)
wb_info.new_ch_width = 0;
else
wb_info.new_ch_width = 1;
if (pComCfg->vht_bw == VHT_BW_80) {
wb_info.center_freq_1 = vht_cent_ch_freq(pAd, pComCfg->Channel);
wb_info.center_freq_2 = 0;
}
NdisMoveMemory(ptr, &wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
wb_len = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
ptr += wb_len;
wb_len += 2;
}
*ptr = IE_VHT_TXPWR_ENV;
NdisZeroMemory(&txpwr_env, sizeof(VHT_TXPWR_ENV_IE));
tp_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
*(ptr + 1) = tp_len;
ptr += 2;
NdisMoveMemory(ptr, &txpwr_env, tp_len);
ptr += tp_len;
tp_len += 2;
*ch_sw_wrapper = wb_len + tp_len;
FrameLen += (2 + wb_len + tp_len);
}
#endif /* DOT11_VHT_AC */
#endif /* DOT11_N_SUPPORT */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* step 5. Update HT. Since some fields might change in the same BSS. */
if (WMODE_CAP_N(PhyMode) && (wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2; // no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &pComCfg->HtCapability,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
#ifdef DOT11N_DRAFT3
/*
P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE
*/
if ((pComCfg->Channel <= 14) &&
(pComCfg->HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pComCfg->Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pComCfg->Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pComCfg->Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pComCfg->Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pComCfg->Dot11OBssScanActivityThre);
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11N_DRAFT3 */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) && (pComCfg->Channel > 14))
{
int _len = build_vht_ies(pAd, (UCHAR *)(pBeaconFrame+FrameLen), SUBTYPE_BEACON);
FrameLen += _len;
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen, infoPos;
PUCHAR pInfo;
UCHAR extInfoLen;
BOOLEAN bNeedAppendExtIE = FALSE;
EXT_CAP_INFO_ELEMENT extCapInfo;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pComCfg->Channel <= 14) &&
(pMbss->wdev.DesiredHtPhyInfo.bHtEnable) &&
(pComCfg->bBssCoexEnable == TRUE)
)
{
extCapInfo.BssCoexistMgmtSupport = 1;
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) &&
(pAd->CommonCfg.Channel > 14))
extCapInfo.operating_mode_notification = 1;
#endif /* DOT11_VHT_AC */
pInfo = (PUCHAR)(&extCapInfo);
for (infoPos = 0; infoPos < extInfoLen; infoPos++)
{
if (pInfo[infoPos] != 0)
{
bNeedAppendExtIE = TRUE;
break;
}
}
if (bNeedAppendExtIE == TRUE)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#ifdef WFA_VHT_PF
if (pAd->force_vht_op_mode == TRUE)
{
ULONG TmpLen;
UCHAR operating_ie = IE_OPERATING_MODE_NOTIFY, operating_len = 1;
OPERATING_MODE operating_mode;
operating_mode.rx_nss_type = 0;
operating_mode.rx_nss = (pAd->vht_pf_op_ss - 1);
operating_mode.ch_width = pAd->vht_pf_op_bw;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &operating_ie,
1, &operating_len,
1, &operating_mode,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* WFA_VHT_PF */
/* add WMM IE here */
if (pMbss->wdev.bWmmCapable)
{
ULONG TmpLen;
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
UINT8 AIFSN[4];
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &pMbss->UapsdInfo);
#endif /* UAPSD_SUPPORT */
NdisMoveMemory(AIFSN, pAd->ApCfg.BssEdcaParm.Aifsn, sizeof(AIFSN));
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(AIFSN[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->phy_ctrl.FlgQloadEnable != 0)
FrameLen += QBSS_LoadElementAppend(pAd, pBeaconFrame+FrameLen);
#endif /* AP_QLOAD_SUPPORT */
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include a
Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (((pComCfg->Channel > 14) && pComCfg->bIEEE80211H == TRUE)
)
{
ULONG TmpLen;
UINT8 PwrConstraintIE = IE_POWER_CONSTRAINT;
UINT8 PwrConstraintLen = 1;
UINT8 PwrConstraint = pComCfg->PwrConstraint;
/* prepare power constraint IE */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &PwrConstraintIE,
1, &PwrConstraintLen,
1, &PwrConstraint,
END_OF_ARGS);
FrameLen += TmpLen;
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
ULONG TmpLen;
UINT8 vht_txpwr_env_ie = IE_VHT_TXPWR_ENV;
UINT8 ie_len;
VHT_TXPWR_ENV_IE txpwr_env;
ie_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &vht_txpwr_env_ie,
1, &ie_len,
ie_len, &txpwr_env,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11_VHT_AC */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pComCfg->HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = HtLen1 + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
/* add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back */
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pComCfg->bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pComCfg->bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pComCfg->bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (pComCfg->b256QAM_2G && WMODE_2G_ONLY(pComCfg->PhyMode))
RalinkSpecificIe[5] |= 0x8;
#endif /* DOT11_VHT_AC */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* step 6. Since FrameLen may change, update TXWI. */
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.Channel > 14) {
BeaconTransmit.field.MODE = MODE_OFDM;
BeaconTransmit.field.MCS = MCS_RATE_6;
}
#endif /* A_BAND_SUPPORT */
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, RESERVED_WCID,
FrameLen, PID_MGMT, 0 /*QID_MGMT*/, 0, IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/* step 7. move BEACON TXWI and frame content to on-chip memory */
RT28xx_UpdateBeaconToAsic(pAd, apidx, FrameLen, UpdatePos);
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(
IN PRTMP_ADAPTER pAd,
IN INT apidx)
{
UCHAR DsLen = 1, SsidLen;/*, TimLen = 4, */
/*BitmapControl = 0, VirtualBitmap = 0, EmptySsidLen = 0, SsidLen; */
/* UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2; */
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue;
HTTRANSMIT_SETTING BeaconTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
#ifdef SPECIFIC_BCN_BUF_SUPPORT
unsigned long irqFlag = 0;
#endif /* SPECIFIC_BCN_BUF_SUPPORT */
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
#ifdef P2P_SUPPORT
pAd->ApCfg.MBSSID[apidx].Bssid,
#endif /* P2P_SUPPORT */
pAd->ApCfg.MBSSID[apidx].Bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == PHY_11B)
SupRateLen = 4;
#ifdef P2P_SUPPORT
if (P2P_GO_ON(pAd))
{
UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR SupRateIe = IE_SUPP_RATES;
UCHAR SupRateLen = 0;
SupRate[0] = 0x8C; /* 6 mbps, in units of 0.5 Mbps, basic rate */
SupRate[1] = 0x12; /* 9 mbps, in units of 0.5 Mbps */
SupRate[2] = 0x98; /* 12 mbps, in units of 0.5 Mbps, basic rate */
SupRate[3] = 0x24; /* 18 mbps, in units of 0.5 Mbps */
SupRate[4] = 0xb0; /* 24 mbps, in units of 0.5 Mbps, basic rate */
SupRate[5] = 0x48; /* 36 mbps, in units of 0.5 Mbps */
SupRate[6] = 0x60; /* 48 mbps, in units of 0.5 Mbps */
SupRate[7] = 0x6c; /* 54 mbps, in units of 0.5 Mbps */
SupRateLen = 8;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, &SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
}
else
#endif /* P2P_SUPPORT */
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != PHY_11B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
/* UCHAR TmpFrame[256]; */
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/* 802.11n D2.0 Annex J */
/* USA */
/* regulatory class 32, channel set 1~7 */
/* regulatory class 33, channel set 5-11 */
UCHAR rclass32[]= {32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]= {33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == PHY_11BGN_MIXED)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
/* */
/* step 6. move BEACON TXD and frame content to on-chip memory */
/* */
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(ptr, TYPE_TXWI);
#endif
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (higher 8KB shared memory)
*/
RTMP_MAC_SHR_MSEL_LOCK(pAd, HIGHER_SHRMEM, irqFlag);
#endif /* SPECIFIC_BCN_BUF_SUPPORT */
for (i=0; i<TXWI_SIZE; i+=4) /* 16-byte TXWI field */
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + i, longValue);
ptr += 4;
}
/* update BEACON frame content. start right after the 16-byte TXWI field. */
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWI_SIZE + i, longValue);
ptr += 4;
}
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (lower 16KB shared memory)
*/
RTMP_MAC_SHR_MSEL_UNLOCK(pAd, LOWER_SHRMEM, irqFlag);
#endif /* SPECIFIC_BCN_BUF_SUPPORT */
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
BSS_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
UCHAR *pBeaconFrame, *tmac_info;
#if defined(DOT11_N_SUPPORT) && defined(DOT11K_RRM_SUPPORT)
UINT i;
#endif
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at HT rate. */
UCHAR PhyMode, SupRateLen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
UINT8 tx_hw_hdr_len = pAd->chipCap.tx_hw_hdr_len;
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
if (pMbss->bcn_buf.BeaconPkt == NULL) {
DBGPRINT(RT_DEBUG_ERROR, ("%s():Invalid BeaconPkt for MBSS[%d]\n",
__FUNCTION__, apidx));
return;
}
#ifdef MT_MAC
if (pAd->chipCap.hif_type == HIF_MT) {
return;
//Carter, 20140306 for MT7603, merge MakeAllBeacon into UpdateAllBeacon
}
#endif
tmac_info = (UCHAR *)GET_OS_PKT_DATAPTR(pMbss->bcn_buf.BeaconPkt);
if (pAd->chipCap.hif_type == HIF_MT)
{
pBeaconFrame = (UCHAR *)(tmac_info + tx_hw_hdr_len);
}
else
{
pBeaconFrame = (UCHAR *)(tmac_info + TXWISize);
}
PhyMode = pMbss->wdev.PhyMode;
SsidLen = (pMbss->bHideSsid) ? 0 : pMbss->SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON,
0, BROADCAST_ADDR,
pMbss->wdev.if_addr,
pMbss->wdev.bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pMbss->CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pMbss->Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
BeaconTransmit.word = 0;
write_tmac_info_beacon(pAd, apidx, tmac_info, &BeaconTransmit, FrameLen);
/* step 6. move BEACON TXD and frame content to on-chip memory */
asic_write_bcn_buf(pAd,
tmac_info, TXWISize,
pBeaconFrame, FrameLen,
pAd->BeaconOffset[pMbss->bcn_buf.BcnBufIdx]);
pMbss->TimIELocationInBeacon = (UCHAR)FrameLen;
pMbss->bcn_buf.cap_ie_pos = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
//pMbss->bcn_buf.bcn_state = BCN_TX_IDLE;
//+++Add by shiang for debug
//---Add by shiang for debug
}
/*
==========================================================================
Description:
Update the BEACON frame in the shared memory. Because TIM IE is variable
length. other IEs after TIM has to shift and total frame length may change
for each BEACON period.
Output:
pAd->ApCfg.MBSSID[apidx].CapabilityInfo
pAd->ApCfg.ErpIeContent
==========================================================================
*/
VOID APUpdateBeaconFrame(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR *pBeaconFrame, *tmac_info;
UCHAR *ptr;
ULONG FrameLen;
ULONG UpdatePos = 0;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
UCHAR ID_1B, TimFirst, TimLast, *pTim;
BSS_STRUCT *pMbss;
COMMON_CONFIG *pComCfg;
BOOLEAN bHasWpsIE = FALSE;
UINT i;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
struct wifi_dev *wdev;
UCHAR tx_hw_hdr_len = pAd->chipCap.tx_hw_hdr_len;
UINT8 TXWISize = pAd->chipCap.TXWISize;
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
UCHAR PhyMode = 0, SupRateLen;
pComCfg = &pAd->CommonCfg;
pMbss = &pAd->ApCfg.MBSSID[apidx];
wdev = &pMbss->wdev;
if (!pMbss || !pMbss->bcn_buf.BeaconPkt)
return;
tmac_info = (UCHAR *)GET_OS_PKT_DATAPTR(pMbss->bcn_buf.BeaconPkt);
if (pAd->chipCap.hif_type == HIF_MT)
{
pBeaconFrame = (UCHAR *)(tmac_info + tx_hw_hdr_len);
}
else
{
pBeaconFrame = (UCHAR *)(tmac_info + TXWISize);
}
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
#ifdef CONFIG_FPGA_MODE
if (pAd->fpga_ctl.fpga_on & 0x1) {
if (pAd->fpga_ctl.tx_kick_cnt == 0)
return;
}
#ifdef MT_MAC
if (pAd->fpga_ctl.no_bcn) {
DBGPRINT(RT_DEBUG_OFF, ("%s():Bcn Tx is blocked!\n", __FUNCTION__));
return;
}
#endif /* MT_MAC */
#endif /* CONFIG_FPGA_MODE */
#ifdef MT_MAC
if (pAd->chipCap.hif_type == HIF_MT) {
BOOLEAN is_pretbtt_int = FALSE;
#ifdef RTMP_PCI_SUPPORT
USHORT FreeNum = GET_BCNRING_FREENO(pAd);
if (FreeNum <= 0) {
DBGPRINT(RT_DEBUG_ERROR, ("%s()=>BSS%d:BcnRing FreeNum is not enough!\n",
__FUNCTION__, apidx));
return;
}
#endif /* RTMP_PCI_SUPPORT */
if (pMbss->bcn_buf.bcn_state != BCN_TX_IDLE) {
#ifdef RTMP_PCI_SUPPORT
APCheckBcnQHandler(pAd, apidx, &is_pretbtt_int);
#endif /* RTMP_PCI_SUPPORT */
if (is_pretbtt_int == FALSE)
return;
}
PhyMode = pMbss->wdev.PhyMode;
SsidLen = (pMbss->bHideSsid) ? 0 : pMbss->SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON,
0, BROADCAST_ADDR,
pMbss->wdev.if_addr,
pMbss->wdev.bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pMbss->CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pMbss->Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
BeaconTransmit.word = 0;
//write_tmac_info_beacon(pAd, apidx, tmac_info, &BeaconTransmit, FrameLen);
pMbss->TimIELocationInBeacon = (UCHAR)FrameLen;
pMbss->bcn_buf.cap_ie_pos = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
FrameLen = UpdatePos = pMbss->TimIELocationInBeacon;
PhyMode = wdev->PhyMode;
}
#endif /* MT_MAC */
/*
step 1 - update BEACON's Capability
*/
ptr = pBeaconFrame + pMbss->bcn_buf.cap_ie_pos;
//prevent little/big endian issue. and let asic_write_bcn_buf() handle it.
*(UINT16 *)ptr = pMbss->CapabilityInfo;
/*
step 2 - update TIM IE
TODO: enlarge TIM bitmap to support up to 64 STAs
TODO: re-measure if RT2600 TBTT interrupt happens faster than BEACON sent out time
*/
ptr = pBeaconFrame + pMbss->TimIELocationInBeacon;
*ptr = IE_TIM;
*(ptr + 2) = pAd->ApCfg.DtimCount;
*(ptr + 3) = pAd->ApCfg.DtimPeriod;
/* find the smallest AID (PS mode) */
TimFirst = 0; /* record first TIM byte != 0x00 */
TimLast = 0; /* record last TIM byte != 0x00 */
pTim = pMbss->TimBitmaps;
for(ID_1B=0; ID_1B<WLAN_MAX_NUM_OF_TIM; ID_1B++)
{
/* get the TIM indicating PS packets for 8 stations */
UCHAR tim_1B = pTim[ID_1B];
if (ID_1B == 0)
tim_1B &= 0xfe; /* skip bit0 bc/mc */
if (tim_1B == 0)
continue; /* find next 1B */
if (TimFirst == 0)
TimFirst = ID_1B;
TimLast = ID_1B;
}
/* fill TIM content to beacon buffer */
if (TimFirst & 0x01)
TimFirst --; /* find the even offset byte */
*(ptr + 1) = 3+(TimLast-TimFirst+1); /* TIM IE length */
*(ptr + 4) = TimFirst;
for(i=TimFirst; i<=TimLast; i++)
*(ptr + 5 + i - TimFirst) = pTim[i];
/* bit0 means backlogged mcast/bcast */
if (pAd->ApCfg.DtimCount == 0)
*(ptr + 4) |= (pMbss->TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] & 0x01);
/* adjust BEACON length according to the new TIM */
FrameLen += (2 + *(ptr+1));
/* move RSN IE from below to here for Ralink Win7 v3.0.0.61 version parse beacon issue. */
/* sync the order with BRCM's AP. */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA) ||
(wdev->AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((wdev->AuthMode == Ndis802_11AuthModeWPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
#ifdef WAPI_SUPPORT
else if ((wdev->AuthMode == Ndis802_11AuthModeWAICERT) ||
(wdev->AuthMode == Ndis802_11AuthModeWAIPSK))
RSNIe = IE_WAPI;
#endif /* WAPI_SUPPORT */
/* Append RSN_IE when WPA OR WPAPSK, */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
1, &RSNIe2,
1, &pMbss->RSNIE_Len[1],
pMbss->RSNIE_Len[1], pMbss->RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else if (wdev->AuthMode >= Ndis802_11AuthModeWPA)
{
ULONG TmpLen;
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#ifdef HOSTAPD_SUPPORT
if (pMbss->HostapdWPS && (pMbss->WscIEBeacon.ValueLen))
bHasWpsIE = TRUE;
#endif
#ifdef WSC_AP_SUPPORT
/* add Simple Config Information Element */
if (((pMbss->WscControl.WscConfMode >= 1) && (pMbss->WscIEBeacon.ValueLen)))
bHasWpsIE = TRUE;
#endif /* WSC_AP_SUPPORT */
if (bHasWpsIE)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pMbss->WscIEBeacon.ValueLen, pMbss->WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
#ifdef WSC_AP_SUPPORT
if ((pMbss->WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pMbss->wdev.IEEE8021X == FALSE) &&
#endif /* DOT1X_SUPPORT */
(pMbss->wdev.WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http:msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif /* WSC_AP_SUPPORT */
/* Update ERP */
if ((pComCfg->ExtRateLen) && (PhyMode != WMODE_B))
{
/* fill ERP IE */
ptr = (UCHAR *)pBeaconFrame + FrameLen; /* pTxD->DataByteCnt; */
*ptr = IE_ERP;
*(ptr + 1) = 1;
*(ptr + 2) = pAd->ApCfg.ErpIeContent;
FrameLen += 3;
}
#ifdef A_BAND_SUPPORT
/* fill up Channel Switch Announcement Element */
if ((pComCfg->Channel > 14)
&& (pComCfg->bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
ptr = pBeaconFrame + FrameLen;
*ptr = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
*(ptr + 1) = 3;
*(ptr + 2) = 1;
*(ptr + 3) = pComCfg->Channel;
*(ptr + 4) = (pAd->Dot11_H.CSPeriod - pAd->Dot11_H.CSCount - 1);
ptr += 5;
FrameLen += 5;
#ifdef DOT11_N_SUPPORT
/* Extended Channel Switch Announcement Element */
if (pComCfg->bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
NdisMoveMemory(ptr, &HtExtChannelSwitchIe, sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE));
ptr += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
FrameLen += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
}
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
INT tp_len, wb_len = 0;
UCHAR *ch_sw_wrapper;
VHT_TXPWR_ENV_IE txpwr_env;
*ptr = IE_CH_SWITCH_WRAPPER;
ch_sw_wrapper = (UCHAR *)(ptr + 1); // reserve for length
ptr += 2; // skip len
if (pComCfg->RegTransmitSetting.field.BW == BW_40) {
WIDE_BW_CH_SWITCH_ELEMENT wb_info;
*ptr = IE_WIDE_BW_CH_SWITCH;
*(ptr + 1) = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
ptr += 2;
NdisZeroMemory(&wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
if (pComCfg->vht_bw == VHT_BW_2040)
wb_info.new_ch_width = 0;
else
wb_info.new_ch_width = 1;
if (pComCfg->vht_bw == VHT_BW_80) {
wb_info.center_freq_1 = vht_cent_ch_freq(pAd, pComCfg->Channel);
wb_info.center_freq_2 = 0;
}
NdisMoveMemory(ptr, &wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
wb_len = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
ptr += wb_len;
wb_len += 2;
}
*ptr = IE_VHT_TXPWR_ENV;
NdisZeroMemory(&txpwr_env, sizeof(VHT_TXPWR_ENV_IE));
tp_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
*(ptr + 1) = tp_len;
ptr += 2;
NdisMoveMemory(ptr, &txpwr_env, tp_len);
ptr += tp_len;
tp_len += 2;
*ch_sw_wrapper = wb_len + tp_len;
FrameLen += (2 + wb_len + tp_len);
}
#endif /* DOT11_VHT_AC */
#endif /* DOT11_N_SUPPORT */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* step 5. Update HT. Since some fields might change in the same BSS. */
if (WMODE_CAP_N(PhyMode) && (wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
HT_CAPABILITY_IE HtCapabilityTmp;
#ifdef RT_BIG_ENDIAN
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2; // no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
#ifndef RT_BIG_ENDIAN
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
HtCapabilityTmp.HtCapInfo.ChannelWidth = pComCfg->AddHTInfo.AddHtInfo.RecomWidth;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
HtCapabilityTmp.HtCapInfo.ChannelWidth = pComCfg->AddHTInfo.AddHtInfo.RecomWidth;
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
#ifdef DOT11N_DRAFT3
/*
P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE
*/
if ((pComCfg->Channel <= 14) &&
(pComCfg->HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pComCfg->Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pComCfg->Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pComCfg->Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pComCfg->Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pComCfg->Dot11OBssScanActivityThre);
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11N_DRAFT3 */
#ifdef CONFIG_HOTSPOT
if (pMbss->HotSpotCtrl.HotSpotEnable)
{
ULONG TmpLen;
/* Indication element */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
pMbss->HotSpotCtrl.HSIndicationIELen,
pMbss->HotSpotCtrl.HSIndicationIE, END_OF_ARGS);
FrameLen += TmpLen;
/* Interworking element */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
pMbss->HotSpotCtrl.InterWorkingIELen,
pMbss->HotSpotCtrl.InterWorkingIE, END_OF_ARGS);
FrameLen += TmpLen;
/* Advertisement Protocol element */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
pMbss->HotSpotCtrl.AdvertisementProtoIELen,
pMbss->HotSpotCtrl.AdvertisementProtoIE, END_OF_ARGS);
FrameLen += TmpLen;
/* Roaming Consortium element */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
pMbss->HotSpotCtrl.RoamingConsortiumIELen,
pMbss->HotSpotCtrl.RoamingConsortiumIE, END_OF_ARGS);
FrameLen += TmpLen;
/* P2P element */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
pMbss->HotSpotCtrl.P2PIELen,
pMbss->HotSpotCtrl.P2PIE, END_OF_ARGS);
FrameLen += TmpLen;
}
#endif
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) && (pComCfg->Channel > 14))
{
int _len = build_vht_ies(pAd, (UCHAR *)(pBeaconFrame+FrameLen), SUBTYPE_BEACON);
FrameLen += _len;
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen, infoPos;
PUCHAR pInfo;
UCHAR extInfoLen;
BOOLEAN bNeedAppendExtIE = FALSE;
EXT_CAP_INFO_ELEMENT extCapInfo;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pComCfg->Channel <= 14) &&
(pMbss->wdev.DesiredHtPhyInfo.bHtEnable) &&
(pComCfg->bBssCoexEnable == TRUE)
)
{
extCapInfo.BssCoexistMgmtSupport = 1;
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
#ifdef CONFIG_DOT11V_WNM
if (pMbss->WNMCtrl.ProxyARPEnable)
extCapInfo.proxy_arp = 1;
#endif /* CONFIG_DOT11V_WNM */
#ifdef CONFIG_HOTSPOT
if (pMbss->HotSpotCtrl.HotSpotEnable)
extCapInfo.interworking = 1;
#endif /* CONFIG_HOTSPOT */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) &&
(pAd->CommonCfg.Channel > 14))
extCapInfo.operating_mode_notification = 1;
#endif /* DOT11_VHT_AC */
pInfo = (PUCHAR)(&extCapInfo);
for (infoPos = 0; infoPos < extInfoLen; infoPos++)
{
if (pInfo[infoPos] != 0)
{
bNeedAppendExtIE = TRUE;
break;
}
}
if (bNeedAppendExtIE == TRUE)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#ifdef WFA_VHT_PF
if (pAd->force_vht_op_mode == TRUE)
{
ULONG TmpLen;
UCHAR operating_ie = IE_OPERATING_MODE_NOTIFY, operating_len = 1;
OPERATING_MODE operating_mode;
operating_mode.rx_nss_type = 0;
operating_mode.rx_nss = (pAd->vht_pf_op_ss - 1);
operating_mode.ch_width = pAd->vht_pf_op_bw;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &operating_ie,
1, &operating_len,
1, &operating_mode,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* WFA_VHT_PF */
/* add WMM IE here */
if (pMbss->wdev.bWmmCapable)
{
ULONG TmpLen;
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
UINT8 AIFSN[4];
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &pMbss->wdev.UapsdInfo);
#endif /* UAPSD_SUPPORT */
NdisMoveMemory(AIFSN, pAd->ApCfg.BssEdcaParm.Aifsn, sizeof(AIFSN));
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(AIFSN[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->phy_ctrl.FlgQloadEnable != 0)
{
FrameLen += QBSS_LoadElementAppend(pAd, pBeaconFrame+FrameLen);
}
#endif /* AP_QLOAD_SUPPORT */
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include a
Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (((pComCfg->Channel > 14) && pComCfg->bIEEE80211H == TRUE)
)
{
ULONG TmpLen;
UINT8 PwrConstraintIE = IE_POWER_CONSTRAINT;
UINT8 PwrConstraintLen = 1;
UINT8 PwrConstraint = pComCfg->PwrConstraint;
/* prepare power constraint IE */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &PwrConstraintIE,
1, &PwrConstraintLen,
1, &PwrConstraint,
END_OF_ARGS);
FrameLen += TmpLen;
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
ULONG TmpLen;
UINT8 vht_txpwr_env_ie = IE_VHT_TXPWR_ENV;
UINT8 ie_len;
VHT_TXPWR_ENV_IE txpwr_env;
ie_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &vht_txpwr_env_ie,
1, &ie_len,
ie_len, &txpwr_env,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11_VHT_AC */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pComCfg->HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = HtLen1 + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
/* add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back */
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pComCfg->bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pComCfg->bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pComCfg->bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* step 6. Since FrameLen may change, update TXWI. */
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.Channel > 14) {
BeaconTransmit.field.MODE = MODE_OFDM;
BeaconTransmit.field.MCS = MCS_RATE_6;
}
#endif /* A_BAND_SUPPORT */
write_tmac_info_beacon(pAd, apidx, tmac_info, &BeaconTransmit, FrameLen);
/* step 6. move BEACON TXD and frame content to on-chip memory */
asic_write_bcn_buf(pAd,
tmac_info, TXWISize,
pBeaconFrame, FrameLen,
pAd->BeaconOffset[pMbss->bcn_buf.BcnBufIdx]);
#if defined(MT7603_FPGA) || defined(MT7628_FPGA)
// TODO: shiang-7603, we use different way to update beacon packet!
if (0)//IS_MT7603(pAd))
{
hex_dump("Beacon_TMAC_INFO", (UCHAR *)tmac_info, tx_hw_hdr_len);
dump_tmac_info(pAd, tmac_info);
hex_dump("BeaconFrame", pBeaconFrame, FrameLen);
}
#endif /* MT7603_FPGA */
/* step 7. move BEACON TXWI and frame content to on-chip memory */
RT28xx_UpdateBeaconToAsic(pAd, apidx, FrameLen, UpdatePos);
{
UINT32 Lowpart, Highpart;
AsicGetTsfTime(pAd, &Highpart, &Lowpart);
pMbss->WriteBcnDoneTime[pMbss->timer_loop] = Lowpart;
}
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#if defined(DOT11_N_SUPPORT) && defined(DOT11K_RRM_SUPPORT)
UINT i;
#endif /* defined(DOT11_N_SUPPORT) && defined(DOT11K_RRM_SUPPORT) */
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
PhyMode = pMbss->wdev.PhyMode;
if (pMbss->bHideSsid)
SsidLen = 0;
else
SsidLen = pMbss->SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pMbss->wdev.if_addr,
pMbss->wdev.bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pMbss->CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pMbss->Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx)
&& (pAd->CommonCfg.RegulatoryClass[0] != 0))
{
TmpLen2 = 0;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
RguClass_BuildBcnChList(pAd, TmpFrame, &TmpLen2);
}
#endif /* DOT11K_RRM_SUPPORT */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx))
{
InsertTpcReportIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
RTMP_GetTxPwr(pAd, pAd->CommonCfg.MlmeTransmit), 0);
RRM_InsertRRMEnCapIE(pAd, pBeaconFrame+FrameLen, &FrameLen, apidx);
}
#endif /* DOT11K_RRM_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
#ifdef DOT11K_RRM_SUPPORT
for (i=0; i<MAX_NUM_OF_REGULATORY_CLASS; i++)
{
if (pAd->CommonCfg.RegulatoryClass[i] == 0)
break;
InsertChannelRepIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
(PSTRING)pAd->CommonCfg.CountryCode,
pAd->CommonCfg.RegulatoryClass[i]);
}
#else
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11R_FT_SUPPORT
/* The Mobility Domain information element (MDIE) is present in Beacon
** frame when dot11FastBssTransitionEnable is set to true. */
if (pAd->ApCfg.MBSSID[apidx].FtCfg.FtCapFlag.Dot11rFtEnable)
{
PFT_CFG pFtCfg = &pAd->ApCfg.MBSSID[apidx].FtCfg;
FT_CAP_AND_POLICY FtCap;
NdisZeroMemory(&FtCap, sizeof(FT_CAP_AND_POLICY));
FtCap.field.FtOverDs = pFtCfg->FtCapFlag.FtOverDs;
FtCap.field.RsrReqCap = pFtCfg->FtCapFlag.RsrReqCap;
FT_InsertMdIE(pAd, pBeaconFrame + FrameLen, &FrameLen,
pFtCfg->FtMdId, FtCap);
}
#endif /* DOT11R_FT_SUPPORT */
BeaconTransmit.word = 0;
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
updateAllBeacon(pAd, apidx, FrameLen);
pMbss->TimIELocationInBeacon = (UCHAR)FrameLen;
pMbss->CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
void updateAllBeacon(RTMP_ADAPTER *pAd, INT apidx, ULONG FrameLen)
{
UCHAR *ptr = NULL;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
UINT32 longValue, reg_base;
UINT i = 0;
UINT8 TXWISize = pAd->chipCap.TXWISize;
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pMbss->BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(
IN PRTMP_ADAPTER pAd,
IN INT apidx)
{
UCHAR DsLen = 1, SsidLen;//, TimLen = 4,
//BitmapControl = 0, VirtualBitmap = 0, EmptySsidLen = 0, SsidLen;
// UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit; // MGMT frame PHY rate setting when operatin at Ht rate.
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR, pAd->ApCfg.MBSSID[apidx].Bssid);
// for update framelen to TxWI later.
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &pAd->CommonCfg.SupRateLen,
pAd->CommonCfg.SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if (pAd->CommonCfg.ExtRateLen)
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
// add country IE, power constraint IE
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR TmpFrame[256];
UCHAR CountryIe = IE_COUNTRY;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
// prepare channel information
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif // EXT_BUILD_CHANNEL_LIST //
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx)
&& (pAd->CommonCfg.RegulatoryClass[0] != 0))
{
TmpLen2 = 0;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
RguClass_BuildBcnChList(pAd, TmpFrame, &TmpLen2);
}
#endif // DOT11K_RRM_SUPPORT //
// need to do the padding bit check, and concatenate it
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
}
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx))
{
InsertTpcReportIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
RTMP_GetTxPwr(pAd, pAd->CommonCfg.MlmeTransmit), 0);
RRM_InsertRRMEnCapIE(pAd, pBeaconFrame+FrameLen, &FrameLen, apidx);
}
#endif // DOT11K_RRM_SUPPORT //
#ifdef DOT11_N_SUPPORT
// AP Channel Report
#ifdef DOT11K_RRM_SUPPORT
for (i=0; i<MAX_NUM_OF_REGULATORY_CLASS; i++)
{
if (pAd->CommonCfg.RegulatoryClass[i] == 0)
break;
InsertChannelRepIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
(PSTRING)pAd->CommonCfg.CountryCode,
pAd->CommonCfg.RegulatoryClass[i]);
}
#else
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
// 802.11n D2.0 Annex J
// USA
// regulatory class 32, channel set 1~7
// regulatory class 33, channel set 5-11
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; //sizeof(rclass32);
if (pAd->CommonCfg.PhyMode == PHY_11BGN_MIXED)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif
#endif // DOT11_N_SUPPORT //
#ifdef WSC_AP_SUPPORT
// add Simple Config Information Element
if (((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode >= 1) && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen))
#ifdef HOSTAPD_SUPPORT
|| pAd->ApCfg.HostapdWPS
#endif
)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen, pAd->ApCfg.MBSSID[apidx].WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif // DOT1X_SUPPORT //
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif // WSC_AP_SUPPORT //
#ifdef DOT11R_FT_SUPPORT
/* The Mobility Domain information element (MDIE) is present in Beacon
** frame when dot11FastBssTransitionEnable is set to true. */
if (pAd->ApCfg.MBSSID[apidx].FtCfg.FtCapFlag.Dot11rFtEnable)
{
PFT_CFG pFtCfg = &pAd->ApCfg.MBSSID[apidx].FtCfg;
FT_CAP_AND_POLICY FtCap;
NdisZeroMemory(&FtCap, sizeof(FT_CAP_AND_POLICY));
FtCap.field.FtOverDs = pFtCfg->FtCapFlag.FtOverDs;
FtCap.field.RsrReqCap = pFtCfg->FtCapFlag.RsrReqCap;
FT_InsertMdIE(pAd, pBeaconFrame + FrameLen, &FrameLen,
pFtCfg->FtMdId, FtCap);
}
#endif // DOT11R_FT_SUPPORT //
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
#ifdef RT3593
/*
Shared memory access selection (higher 8KB shared memory)
*/
RTMP_RF33_SHARED_MEM_SELECT(pAd);
#endif // RT3593 //
//
// step 6. move BEACON TXD and frame content to on-chip memory
//
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx];
for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, reg_base + i, longValue);
ptr += 4;
}
// update BEACON frame content. start right after the 16-byte TXWI field.
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWI_SIZE;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, reg_base + i, longValue);
ptr += 4;
}
#ifdef RT3593
/*
Set the beacon offset (higher 8KB shared memory)
Shared memory access selection (lower 8KB shared memory)
*/
RTMP_RF33_SHARED_MEM_DESELECT(pAd);
#endif // RT3593 //
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Process the received ProbeRequest from clients
Parameters:
Elem - msg containing the ProbeReq frame
==========================================================================
*/
VOID APPeerProbeReqAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
PEER_PROBE_REQ_PARAM ProbeReqParam;
HEADER_802_11 ProbeRspHdr;
NDIS_STATUS NStatus;
PUCHAR pOutBuffer = NULL;
ULONG FrameLen = 0, TmpLen;
LARGE_INTEGER FakeTimestamp;
UCHAR DsLen = 1;
UCHAR ErpIeLen = 1;
UCHAR apidx = 0, PhyMode, SupRateLen;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
MULTISSID_STRUCT *mbss;
struct wifi_dev *wdev;
CHAR rssi = 0, idx = 0;
if (! PeerProbeReqSanity(pAd, Elem->Msg, Elem->MsgLen, &ProbeReqParam))
return;
for(apidx=0; apidx<pAd->ApCfg.BssidNum; apidx++)
{
mbss = &pAd->ApCfg.MBSSID[apidx];
wdev = &mbss->wdev;
RSNIe = IE_WPA;
if ((wdev->if_dev == NULL) || ((wdev->if_dev != NULL) &&
!(RTMP_OS_NETDEV_STATE_RUNNING(wdev->if_dev))))
{
/* the interface is down, so we can not send probe response */
continue;
}
PhyMode = wdev->PhyMode;
if ( ((((ProbeReqParam.SsidLen == 0) && (!mbss->bHideSsid)) ||
((ProbeReqParam.SsidLen == mbss->SsidLen) && NdisEqualMemory(ProbeReqParam.Ssid, mbss->Ssid, (ULONG) ProbeReqParam.SsidLen)))
)
)
;
else
continue; /* check next BSS */
rssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, (CHAR)Elem->Rssi0, RSSI_0),
ConvertToRssi(pAd, (CHAR)Elem->Rssi1, RSSI_1),
ConvertToRssi(pAd, (CHAR)Elem->Rssi2, RSSI_2));
if ((mbss->ProbeRspRssiThreshold != 0) && (rssi < mbss->ProbeRspRssiThreshold))
{
DBGPRINT(RT_DEBUG_INFO, ("%s: PROBE_RSP Threshold = %d , PROBE RSSI = %d\n",
wdev->if_dev->name, mbss->ProbeRspRssiThreshold, rssi));
continue;
}
/* allocate and send out ProbeRsp frame */
NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);
if (NStatus != NDIS_STATUS_SUCCESS)
return;
MgtMacHeaderInit(pAd, &ProbeRspHdr, SUBTYPE_PROBE_RSP, 0, ProbeReqParam.Addr2,
wdev->if_addr, wdev->bssid);
if ((wdev->AuthMode == Ndis802_11AuthModeWPA) || (wdev->AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((wdev->AuthMode == Ndis802_11AuthModeWPA2) ||(wdev->AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
{
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pOutBuffer, &FrameLen,
sizeof(HEADER_802_11), &ProbeRspHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &mbss->CapabilityInfo,
1, &SsidIe,
1, &mbss->SsidLen,
mbss->SsidLen, mbss->Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
}
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &ErpIe,
1, &ErpIeLen,
1, &pAd->ApCfg.ErpIeContent,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef A_BAND_SUPPORT
/* add Channel switch announcement IE */
if ((pAd->CommonCfg.Channel > 14)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
UCHAR CSAIe=IE_CHANNEL_SWITCH_ANNOUNCEMENT;
UCHAR CSALen=3;
UCHAR CSAMode=1;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &CSAIe,
1, &CSALen,
1, &CSAMode,
1, &pAd->CommonCfg.Channel,
1, &pAd->Dot11_H.CSCount,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, AddHtLen, NewExtLen;
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
/* YF@20120419: Fix IOT Issue with Atheros STA on Windows 7 When IEEE80211H flag turn on. */
HtLen = sizeof(pAd->CommonCfg.HtCapability);
AddHtLen = sizeof(pAd->CommonCfg.AddHTInfo);
NewExtLen = 1;
/*New extension channel offset IE is included in Beacon, Probe Rsp or channel Switch Announcement Frame */
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
sizeof(HT_CAPABILITY_IE), &pAd->CommonCfg.HtCapability,
1, &AddHtInfoIe,
1, &AddHtLen,
sizeof(ADD_HT_INFO_IE), &pAd->CommonCfg.AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = cpu2le16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pAd->CommonCfg.AddHTInfo, AddHtLen);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &AddHtLen,
AddHtLen, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
#endif /* DOT11_N_SUPPORT */
/* Append RSN_IE when WPA OR WPAPSK, */
if (wdev->AuthMode < Ndis802_11AuthModeWPA)
; /* enough information */
else if ((wdev->AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &RSNIe,
1, &mbss->RSNIE_Len[0],
mbss->RSNIE_Len[0], mbss->RSN_IE[0],
1, &RSNIe2,
1, &mbss->RSNIE_Len[1],
mbss->RSNIE_Len[1], mbss->RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else
{
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &RSNIe,
1, &mbss->RSNIE_Len[0],
mbss->RSNIE_Len[0], mbss->RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
/* Extended Capabilities IE */
{
ULONG TmpLen;
EXT_CAP_INFO_ELEMENT extCapInfo;
UCHAR extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D1.10, HT Information Exchange Support */
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pAd->CommonCfg.Channel <= 14) &&
(pAd->ApCfg.MBSSID[apidx].wdev.DesiredHtPhyInfo.bHtEnable) &&
(pAd->CommonCfg.bBssCoexEnable == TRUE))
{
extCapInfo.BssCoexistMgmtSupport = 1;
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->phy_ctrl.FlgQloadEnable != 0)
{
FrameLen += QBSS_LoadElementAppend(pAd, pOutBuffer+FrameLen);
}
#endif /* AP_QLOAD_SUPPORT */
/* add WMM IE here */
if (mbss->wdev.bWmmCapable)
{
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &mbss->UapsdInfo);
#endif /* UAPSD_SUPPORT */
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(pAd->ApCfg.BssEdcaParm.Aifsn[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE */
if (WMODE_CAP_N(PhyMode) &&
(pAd->CommonCfg.Channel <= 14) &&
(wdev->DesiredHtPhyInfo.bHtEnable) &&
(pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pAd->CommonCfg.Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pAd->CommonCfg.Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pAd->CommonCfg.Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pAd->CommonCfg.Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pAd->CommonCfg.Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pAd->CommonCfg.Dot11OBssScanActivityThre);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen;
EXT_CAP_INFO_ELEMENT extCapInfo;
UCHAR extInfoLen;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pAd->CommonCfg.Channel <= 14) &&
(pAd->ApCfg.MBSSID[apidx].wdev.DesiredHtPhyInfo.bHtEnable) &&
(pAd->CommonCfg.bBssCoexEnable == TRUE))
{
extCapInfo.BssCoexistMgmtSupport = 1;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen2=0;
UCHAR TmpFrame[256];
UCHAR CountryIe = IE_COUNTRY;
UCHAR MaxTxPower=16;
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include
a Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (pAd->CommonCfg.Channel > 14 && pAd->CommonCfg.bIEEE80211H == TRUE)
{
/* prepare power constraint IE */
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
3, PowerConstraintIE,
END_OF_ARGS);
FrameLen += TmpLen;
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
ULONG TmpLen;
UINT8 vht_txpwr_env_ie = IE_VHT_TXPWR_ENV;
UINT8 ie_len;
VHT_TXPWR_ENV_IE txpwr_env;
ie_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &vht_txpwr_env_ie,
1, &ie_len,
ie_len, &txpwr_env,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11_VHT_AC */
}
#endif /* A_BAND_SUPPORT */
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
/* prepare channel information */
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
}/* Country IE - */
#ifdef A_BAND_SUPPORT
/* add Channel switch announcement IE */
if ((pAd->CommonCfg.Channel > 14)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
UCHAR CSAIe=IE_CHANNEL_SWITCH_ANNOUNCEMENT;
UCHAR CSALen=3;
UCHAR CSAMode=1;
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
1, &CSAIe,
1, &CSALen,
1, &CSAMode,
1, &pAd->CommonCfg.Channel,
1, &pAd->Dot11_H.CSCount,
END_OF_ARGS);
FrameLen += TmpLen;
#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE), &HtExtChannelSwitchIe,
END_OF_ARGS);
}
#endif /* DOT11_N_SUPPORT */
FrameLen += TmpLen;
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, AddHtLen;/*, NewExtLen; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
HtLen = sizeof(pAd->CommonCfg.HtCapability);
AddHtLen = sizeof(pAd->CommonCfg.AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pAd->CommonCfg.HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = cpu2le16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = AddHtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
AddHtLen, &pAd->CommonCfg.AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pAd->CommonCfg.AddHTInfo, AddHtLen);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pOutBuffer + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
AddHtLen, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) &&
(pAd->CommonCfg.Channel > 14)) {
FrameLen += build_vht_ies(pAd, (UCHAR *)(pOutBuffer+FrameLen), SUBTYPE_PROBE_RSP);
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
/*
add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back
Byte0.b3=1 for rssi-feedback
*/
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pAd->CommonCfg.bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pAd->CommonCfg.bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (pAd->CommonCfg.b256QAM_2G && WMODE_2G_ONLY(pAd->CommonCfg.PhyMode))
RalinkSpecificIe[5] |= 0x8;
#endif /* DOT11_VHT_AC */
#ifdef RSSI_FEEDBACK
if (ProbeReqParam.bRequestRssi == TRUE)
{
MAC_TABLE_ENTRY *pEntry=NULL;
DBGPRINT(RT_DEBUG_ERROR, ("SYNC - Send PROBE_RSP to %02x:%02x:%02x:%02x:%02x:%02x...\n",
PRINT_MAC(Addr2)));
RalinkSpecificIe[5] |= 0x8;
pEntry = MacTableLookup(pAd, Addr2);
if (pEntry != NULL)
{
RalinkSpecificIe[6] = (UCHAR)pEntry->RssiSample.AvgRssi0;
RalinkSpecificIe[7] = (UCHAR)pEntry->RssiSample.AvgRssi1;
RalinkSpecificIe[8] = (UCHAR)pEntry->RssiSample.AvgRssi2;
}
}
#endif /* RSSI_FEEDBACK */
MakeOutgoingFrame(pOutBuffer+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* 802.11n 11.1.3.2.2 active scanning. sending probe response with MCS rate is */
for (idx = 0; idx < mbss->ProbeRspTimes; idx++)
MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
MlmeFreeMemory(pAd, pOutBuffer);
}