bool FOOTPRINT_EDIT_FRAME::Clear_Pcb( bool aQuery )
{
if( GetBoard() == NULL )
return false;
if( aQuery && GetScreen()->IsModify() )
{
if( GetBoard()->m_Modules )
{
if( !IsOK( this,
_( "Current Footprint will be lost and this operation cannot be undone. Continue ?" ) ) )
return false;
}
}
// Clear undo and redo lists
GetScreen()->ClearUndoRedoList();
// Delete the current footprint
GetBoard()->m_Modules.DeleteAll();
// init pointeurs et variables
GetScreen()->GetFileName().Empty();
SetCurItem( NULL );
// preserve grid size accross call to InitDataPoints()
// wxRealPoint gridsize = GetScreen()->GetGridSize();
GetScreen()->InitDataPoints( GetPageSizeIU() );
// GetScreen()->SetGrid( gridsize );
Zoom_Automatique( false );
return true;
}
void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
LSET aPrintMaskLayer,
bool aPrintMirrorMode,
void * aData)
{
const GR_DRAWMODE drawmode = (GR_DRAWMODE) 0;
int defaultPenSize = Millimeter2iu( 0.2 );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
DISPLAY_OPTIONS save_opt;
PRINT_PARAMETERS * printParameters = (PRINT_PARAMETERS*) aData; // can be null
PRINT_PARAMETERS::DrillShapeOptT drillShapeOpt = PRINT_PARAMETERS::FULL_DRILL_SHAPE;
if( printParameters )
defaultPenSize = printParameters->m_PenDefaultSize;
save_opt = *displ_opts;
displ_opts->m_ContrastModeDisplay = false;
displ_opts->m_DisplayPadFill = true;
displ_opts->m_DisplayViaFill = true;
displ_opts->m_DisplayPadNum = false;
bool nctmp = GetBoard()->IsElementVisible(NO_CONNECTS_VISIBLE);
GetBoard()->SetElementVisibility(NO_CONNECTS_VISIBLE, false);
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdgeFill = FILLED;
displ_opts->m_DisplayModTextFill = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItemsFill = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
m_canvas->SetPrintMirrored( aPrintMirrorMode );
// Draw footprints, this is done at last in order to print the pad holes in
// white after the tracks and zones
int tmp = D_PAD::m_PadSketchModePenSize;
D_PAD::m_PadSketchModePenSize = defaultPenSize;
wxSize pageSizeIU = GetPageSizeIU() / 2;
wxPoint offset( pageSizeIU.x, pageSizeIU.y );
for( MODULE* module = GetBoard()->m_Modules; module; module = module->Next() )
{
module->Move( offset );
Print_Module( m_canvas, aDC, module, drawmode, aPrintMaskLayer, drillShapeOpt );
module->Move( -offset );
}
D_PAD::m_PadSketchModePenSize = tmp;
m_canvas->SetPrintMirrored( false );
*displ_opts = save_opt;
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, nctmp );
}
/**
* Function Clear_Pcb
* delete all and reinitialize the current board
* @param aQuery = true to prompt user for confirmation, false to initialize silently
*/
bool PCB_EDIT_FRAME::Clear_Pcb( bool aQuery )
{
if( GetBoard() == NULL )
return false;
if( aQuery )
{
if( GetBoard()->m_Drawings || GetBoard()->m_Modules
|| GetBoard()->m_Track || GetBoard()->m_Zone )
{
if( !IsOK( this,
_( "Current Board will be lost and this operation cannot be undone. Continue ?" ) ) )
return false;
}
}
// Clear undo and redo lists because we want a full deletion
GetScreen()->ClearUndoRedoList();
/* Items visibility flags will be set becuse a new board will be created.
* Grid and ratsnest can be left to their previous state
*/
bool showGrid = IsElementVisible( GRID_VISIBLE );
bool showRats = IsElementVisible( RATSNEST_VISIBLE );
// delete the old BOARD and create a new BOARD so that the default
// layer names are put into the BOARD.
SetBoard( new BOARD() );
SetElementVisibility( GRID_VISIBLE, showGrid );
SetElementVisibility( RATSNEST_VISIBLE, showRats );
SetCurItem( NULL );
// clear filename, to avoid overwriting an old file
GetScreen()->GetFileName().Empty();
// preserve grid size accross call to InitDataPoints()
// wxRealPoint gridsize = GetScreen()->GetGridSize();
GetScreen()->InitDataPoints( GetPageSizeIU() );
// GetScreen()->SetGrid( gridsize );
GetBoard()->ResetHighLight();
// Enable all layers (SetCopperLayerCount() will adjust the copper layers enabled)
GetBoard()->SetEnabledLayers( ALL_LAYERS );
// Default copper layers count set to 2: double layer board
GetBoard()->SetCopperLayerCount( 2 );
// Update display:
GetBoard()->SetVisibleLayers( ALL_LAYERS );
ReFillLayerWidget();
Zoom_Automatique( false );
return true;
}
EDA_RECT PCB_BASE_FRAME::GetBoardBoundingBox( bool aBoardEdgesOnly ) const
{
wxASSERT( m_Pcb );
EDA_RECT area = m_Pcb->ComputeBoundingBox( aBoardEdgesOnly );
if( area.GetWidth() == 0 && area.GetHeight() == 0 )
{
wxSize pageSize = GetPageSizeIU();
if( m_showBorderAndTitleBlock )
{
area.SetOrigin( 0, 0 );
area.SetEnd( pageSize.x, pageSize.y );
}
else
{
area.SetOrigin( -pageSize.x / 2, -pageSize.y / 2 );
area.SetEnd( pageSize.x / 2, pageSize.y / 2 );
}
}
return area;
}
bool PCB_EDIT_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, int aCtl )
{
// This is for python:
if( aFileSet.size() != 1 )
{
UTF8 msg = StrPrintf( "Pcbnew:%s() takes only a single filename", __func__ );
DisplayError( this, msg );
return false;
}
wxString fullFileName( aFileSet[0] );
// We insist on caller sending us an absolute path, if it does not, we say it's a bug.
wxASSERT_MSG( wxFileName( fullFileName ).IsAbsolute(), wxT( "Path is not absolute!" ) );
std::unique_ptr<wxSingleInstanceChecker> lockFile = ::LockFile( fullFileName );
if( !lockFile )
{
wxString msg = wxString::Format( _( "PCB file \"%s\" is already open." ), fullFileName );
DisplayError( this, msg );
return false;
}
if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() )
{
if( !HandleUnsavedChanges( this, _( "The current PCB has been modified. Save changes?" ),
[&]()->bool { return SavePcbFile( GetBoard()->GetFileName(), CREATE_BACKUP_FILE ); } ) )
{
return false;
}
}
// Release the lock file, until the new file is actually loaded
ReleaseFile();
wxFileName pro = fullFileName;
pro.SetExt( ProjectFileExtension );
bool is_new = !wxFileName::IsFileReadable( fullFileName );
// If its a non-existent schematic and caller thinks it exists
if( is_new && !( aCtl & KICTL_CREATE ) )
{
// notify user that fullFileName does not exist, ask if user wants to create it.
wxString ask = wxString::Format( _( "PCB \"%s\" does not exist. Do you wish to create it?" ),
fullFileName );
if( !IsOK( this, ask ) )
return false;
}
Clear_Pcb( false ); // pass false since we prompted above for a modified board
IO_MGR::PCB_FILE_T pluginType = plugin_type( fullFileName, aCtl );
bool converted = pluginType != IO_MGR::LEGACY && pluginType != IO_MGR::KICAD_SEXP;
if( !converted )
{
// PROJECT::SetProjectFullName() is an impactful function. It should only be
// called under carefully considered circumstances.
// The calling code should know not to ask me here to change projects unless
// it knows what consequences that will have on other KIFACEs running and using
// this same PROJECT. It can be very harmful if that calling code is stupid.
Prj().SetProjectFullName( pro.GetFullPath() );
// load project settings before BOARD
LoadProjectSettings();
}
if( is_new )
{
OnModify();
}
else
{
BOARD* loadedBoard = 0; // it will be set to non-NULL if loaded OK
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
// This will rename the file if there is an autosave and the user want to recover
CheckForAutoSaveFile( fullFileName );
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", GetPageSizeIU().x );
sprintf( ybuf, "%d", GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
#if USE_INSTRUMENTATION
// measure the time to load a BOARD.
unsigned startTime = GetRunningMicroSecs();
#endif
loadedBoard = pi->Load( fullFileName, NULL, &props );
#if USE_INSTRUMENTATION
unsigned stopTime = GetRunningMicroSecs();
printf( "PLUGIN::Load(): %u usecs\n", stopTime - startTime );
#endif
}
catch( const IO_ERROR& ioe )
{
if( ioe.Problem() != wxT( "CANCEL" ) )
{
wxString msg = wxString::Format( _( "Error loading board file:\n%s" ), fullFileName );
DisplayErrorMessage( this, msg, ioe.What() );
}
return false;
}
// 6.0 TODO: some settings didn't make it into the board file in 5.1 so as not to
// change the file format. For 5.1 we must copy them across from the config-initialized
// board.
BOARD_DESIGN_SETTINGS& bds = loadedBoard->m_designSettings;
BOARD_DESIGN_SETTINGS& configBds = GetBoard()->GetDesignSettings();
bds.m_RequireCourtyards = configBds.m_RequireCourtyards;
bds.m_ProhibitOverlappingCourtyards = configBds.m_ProhibitOverlappingCourtyards;
bds.m_HoleToHoleMin = configBds.m_HoleToHoleMin;
bds.m_LineThickness[LAYER_CLASS_OTHERS] = configBds.m_LineThickness[LAYER_CLASS_OTHERS];
bds.m_TextSize[LAYER_CLASS_OTHERS] = configBds.m_TextSize[LAYER_CLASS_OTHERS];
bds.m_TextThickness[LAYER_CLASS_OTHERS] = configBds.m_TextThickness[LAYER_CLASS_OTHERS];
std::copy( configBds.m_TextItalic, configBds.m_TextItalic + 4, bds.m_TextItalic );
std::copy( configBds.m_TextUpright, configBds.m_TextUpright + 4, bds.m_TextUpright );
bds.m_DiffPairDimensionsList = configBds.m_DiffPairDimensionsList;
bds.m_CopperEdgeClearance = configBds.m_CopperEdgeClearance;
SetBoard( loadedBoard );
// we should not ask PLUGINs to do these items:
loadedBoard->BuildListOfNets();
loadedBoard->SynchronizeNetsAndNetClasses();
// If this is a legacy board then we set the copper edge clearance to 1/2 the edge-cut
// line width (which was a legacy kludge for implementing edge clearances).
if( bds.m_CopperEdgeClearance == Millimeter2iu( LEGACY_COPPEREDGECLEARANCE ) )
bds.SetCopperEdgeClearance( inferLegacyEdgeClearance( loadedBoard ) );
if( loadedBoard->IsModified() )
OnModify();
else
GetScreen()->ClrModify();
if( pluginType == IO_MGR::LEGACY &&
loadedBoard->GetFileFormatVersionAtLoad() < LEGACY_BOARD_FILE_VERSION )
{
DisplayInfoMessage( this,
_( "This file was created by an older version of Pcbnew.\n"
"It will be stored in the new file format when you save this file again." ) );
}
}
{
wxFileName fn = fullFileName;
if( converted )
fn.SetExt( PcbFileExtension );
wxString fname = fn.GetFullPath();
fname.Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP );
GetBoard()->SetFileName( fname );
}
// Lock the file newly opened:
m_file_checker.reset( lockFile.release() );
if( !converted )
UpdateFileHistory( GetBoard()->GetFileName() );
// Rebuild the new pad list (for drc and ratsnet control ...)
GetBoard()->m_Status_Pcb = 0;
// Select netclass Default as current netclass (it always exists)
SetCurrentNetClass( NETCLASS::Default );
// Rebuild list of nets (full ratsnest rebuild)
Compile_Ratsnest( NULL, true );
GetBoard()->BuildConnectivity();
onBoardLoaded();
// Refresh the 3D view, if any
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
#if 0 && defined(DEBUG)
// Output the board object tree to stdout, but please run from command prompt:
GetBoard()->Show( 0, std::cout );
#endif
// from EDA_APPL which was first loaded BOARD only:
{
/* For an obscure reason the focus is lost after loading a board file
* when starting up the process.
* (seems due to the recreation of the layer manager after loading the file)
* Give focus to main window and Drawpanel
* must be done for these 2 windows (for an obscure reason ...)
* Linux specific
* This is more a workaround than a fix.
*/
SetFocus();
GetCanvas()->SetFocus();
}
return true;
}
bool PCB_EDIT_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, int aCtl )
{
// This is for python:
if( aFileSet.size() != 1 )
{
UTF8 msg = StrPrintf( "Pcbnew:%s() takes only a single filename", __func__ );
DisplayError( this, msg );
return false;
}
wxString fullFileName( aFileSet[0] );
// We insist on caller sending us an absolute path, if it does not, we say it's a bug.
wxASSERT_MSG( wxFileName( fullFileName ).IsAbsolute(),
wxT( "bug in single_top.cpp or project manager." ) );
if( !LockFile( fullFileName ) )
{
wxString msg = wxString::Format( _(
"PCB file '%s' is already open." ),
GetChars( fullFileName )
);
DisplayError( this, msg );
return false;
}
if( GetScreen()->IsModify() )
{
int response = YesNoCancelDialog( this, _(
"The current board has been modified. Do you wish to save the changes?" ),
wxEmptyString,
_( "Save and Load" ),
_( "Load Without Saving" )
);
if( response == wxID_CANCEL )
return false;
else if( response == wxID_YES )
SavePcbFile( GetBoard()->GetFileName(), CREATE_BACKUP_FILE );
else
{
// response == wxID_NO, fall thru
}
}
wxFileName pro = fullFileName;
pro.SetExt( ProjectFileExtension );
bool is_new = !wxFileName::IsFileReadable( fullFileName );
// If its a non-existent schematic and caller thinks it exists
if( is_new && !( aCtl & KICTL_CREATE ) )
{
// notify user that fullFileName does not exist, ask if user wants to create it.
wxString ask = wxString::Format( _(
"Board '%s' does not exist. Do you wish to create it?" ),
GetChars( fullFileName )
);
if( !IsOK( this, ask ) )
return false;
}
Clear_Pcb( false ); // pass false since we prompted above for a modified board
IO_MGR::PCB_FILE_T pluginType = plugin_type( fullFileName, aCtl );
bool converted = pluginType != IO_MGR::LEGACY && pluginType != IO_MGR::KICAD;
if( !converted )
{
// PROJECT::SetProjectFullName() is an impactful function. It should only be
// called under carefully considered circumstances.
// The calling code should know not to ask me here to change projects unless
// it knows what consequences that will have on other KIFACEs running and using
// this same PROJECT. It can be very harmful if that calling code is stupid.
Prj().SetProjectFullName( pro.GetFullPath() );
// load project settings before BOARD
LoadProjectSettings();
}
if( is_new )
{
OnModify();
}
else
{
BOARD* loadedBoard = 0; // it will be set to non-NULL if loaded OK
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", GetPageSizeIU().x );
sprintf( ybuf, "%d", GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
#if USE_INSTRUMENTATION
// measure the time to load a BOARD.
unsigned startTime = GetRunningMicroSecs();
#endif
loadedBoard = pi->Load( fullFileName, NULL, &props );
#if USE_INSTRUMENTATION
unsigned stopTime = GetRunningMicroSecs();
printf( "PLUGIN::Load(): %u usecs\n", stopTime - startTime );
#endif
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error loading board.\n%s" ),
GetChars( ioe.errorText )
);
DisplayError( this, msg );
return false;
}
SetBoard( loadedBoard );
// we should not ask PLUGINs to do these items:
loadedBoard->BuildListOfNets();
loadedBoard->SynchronizeNetsAndNetClasses();
SetStatusText( wxEmptyString );
BestZoom();
// update the layer names in the listbox
ReCreateLayerBox( false );
GetScreen()->ClrModify();
{
wxFileName fn = fullFileName;
CheckForAutoSaveFile( fullFileName, fn.GetExt() );
}
if( pluginType == IO_MGR::LEGACY &&
loadedBoard->GetFileFormatVersionAtLoad() < LEGACY_BOARD_FILE_VERSION )
{
DisplayInfoMessage( this,
_( "This file was created by an older version of Pcbnew.\n"
"It will be stored in the new file format when you save this file again." ) );
}
}
{
wxFileName fn = fullFileName;
if( converted )
fn.SetExt( PcbFileExtension );
wxString fname = fn.GetFullPath();
fname.Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP );
GetBoard()->SetFileName( fname );
}
UpdateTitle();
if( !converted )
UpdateFileHistory( GetBoard()->GetFileName() );
// Rebuild the new pad list (for drc and ratsnet control ...)
GetBoard()->m_Status_Pcb = 0;
// Update info shown by the horizontal toolbars
SetCurrentNetClass( NETCLASS::Default );
ReFillLayerWidget();
ReCreateLayerBox();
// upate the layer widget to match board visibility states, both layers and render columns.
syncLayerVisibilities();
syncLayerWidgetLayer();
syncRenderStates();
// Update the tracks / vias available sizes list:
ReCreateAuxiliaryToolbar();
// Update the RATSNEST items, which were not loaded at the time
// BOARD::SetVisibleElements() was called from within any PLUGIN.
// See case RATSNEST_VISIBLE: in BOARD::SetElementVisibility()
GetBoard()->SetVisibleElements( GetBoard()->GetVisibleElements() );
// Display the loaded board:
Zoom_Automatique( false );
// Compile ratsnest and displays net info
{
wxBusyCursor dummy; // Displays an Hourglass while building connectivity
Compile_Ratsnest( NULL, true );
GetBoard()->GetRatsnest()->ProcessBoard();
}
SetMsgPanel( GetBoard() );
// Refresh the 3D view, if any
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
#if 0 && defined(DEBUG)
// Output the board object tree to stdout, but please run from command prompt:
GetBoard()->Show( 0, std::cout );
#endif
// from EDA_APPL which was first loaded BOARD only:
{
/* For an obscure reason the focus is lost after loading a board file
* when starting up the process.
* (seems due to the recreation of the layer manager after loading the file)
* Give focus to main window and Drawpanel
* must be done for these 2 windows (for an obscure reason ...)
* Linux specific
* This is more a workaround than a fix.
*/
SetFocus();
GetCanvas()->SetFocus();
}
return true;
}
FOOTPRINT_VIEWER_FRAME::FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType ) :
PCB_BASE_FRAME( aKiway, aParent, aFrameType, _( "Footprint Library Browser" ),
wxDefaultPosition, wxDefaultSize,
aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL ?
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT :
KICAD_DEFAULT_DRAWFRAME_STYLE,
GetFootprintViewerFrameName() )
{
wxASSERT( aFrameType==FRAME_PCB_MODULE_VIEWER || aFrameType==FRAME_PCB_MODULE_VIEWER_MODAL );
if( aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL )
SetModal( true );
wxAcceleratorTable table( DIM( accels ), accels );
m_FrameName = GetFootprintViewerFrameName();
m_configPath = wxT( "FootprintViewer" );
m_showAxis = true; // true to draw axis.
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( modview_icon_xpm ) );
SetIcon( icon );
m_HotkeysZoomAndGridList = g_Module_Viewer_Hokeys_Descr;
m_libList = new wxListBox( this, ID_MODVIEW_LIB_LIST,
wxDefaultPosition, wxDefaultSize, 0, NULL, wxLB_HSCROLL );
m_footprintList = new wxListBox( this, ID_MODVIEW_FOOTPRINT_LIST,
wxDefaultPosition, wxDefaultSize, 0, NULL, wxLB_HSCROLL );
SetBoard( new BOARD() );
// Ensure all layers and items are visible:
GetBoard()->SetVisibleAlls();
SetScreen( new PCB_SCREEN( GetPageSizeIU() ) );
GetScreen()->m_Center = true; // Center coordinate origins on screen.
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateLibraryList();
UpdateTitle();
// If a footprint was previously loaded, reload it
if( getCurNickname().size() && getCurFootprintName().size() )
{
FPID id;
id.SetLibNickname( getCurNickname() );
id.SetFootprintName( getCurFootprintName() );
GetBoard()->Add( loadFootprint( id ) );
}
if( m_canvas )
m_canvas->SetAcceleratorTable( table );
m_auimgr.SetManagedWindow( this );
wxSize minsize(100,-1); // Min size of list boxes
// Main toolbar is initially docked at the top of the main window and dockable on any side.
// The close button is disable because the footprint viewer has no main menu to re-enable it.
// The tool bar will only be dockable on the top or bottom of the main frame window. This is
// most likely due to the fact that the other windows are not dockable and are preventing the
// tool bar from docking on the right and left.
wxAuiPaneInfo toolbarPaneInfo;
toolbarPaneInfo.Name( wxT( "m_mainToolBar" ) ).ToolbarPane().Top().CloseButton( false );
EDA_PANEINFO info;
info.InfoToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Manage main toolbar, top pane
m_auimgr.AddPane( m_mainToolBar, toolbarPaneInfo );
// Manage the list of libraries, left pane.
m_auimgr.AddPane( m_libList,
wxAuiPaneInfo( info ).Name( wxT( "m_libList" ) )
.Left().Row( 1 ).MinSize( minsize ) );
// Manage the list of footprints, center pane.
m_auimgr.AddPane( m_footprintList,
wxAuiPaneInfo( info ).Name( wxT( "m_footprintList" ) )
.Left().Row( 2 ).MinSize( minsize ) );
// Manage the draw panel, right pane.
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
// Manage the message panel, bottom pane.
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom() );
if( !m_perspective.IsEmpty() )
{
// Restore last saved sizes, pos and other params
// However m_mainToolBar size cannot be set to its last saved size
// because the actual size change depending on the way modview was called:
// the tool to export the current footprint exist or not.
// and the saved size is not always OK
// the trick is to get the default toolbar size, and set the size after
// calling LoadPerspective
wxSize tbsize = m_mainToolBar->GetSize();
m_auimgr.LoadPerspective( m_perspective, false );
m_auimgr.GetPane( m_mainToolBar ).BestSize( tbsize );
}
#if 0 // no.
// Set min size (overwrite params read in LoadPerspective(), if any)
m_auimgr.GetPane( m_libList ).MinSize( minsize );
m_auimgr.GetPane( m_footprintList ).MinSize( minsize );
#endif
// after changing something to the aui manager,
// call Update()() to reflect the changes
m_auimgr.Update();
// Now Drawpanel is sized, we can use BestZoom to show the component (if any)
#ifdef USE_WX_GRAPHICS_CONTEXT
GetScreen()->SetZoom( BestZoom() );
#else
Zoom_Automatique( false );
#endif
Show( true );
}
void EDA_DRAW_FRAME::AdjustScrollBars( const wxPoint& aCenterPositionIU )
{
BASE_SCREEN* screen = GetScreen();
if( !screen || !m_canvas )
return;
double scale = screen->GetScalingFactor();
wxLogTrace( traceScrollSettings, wxT( "Center Position = ( %d, %d ), scale = %.10g" ),
aCenterPositionIU.x, aCenterPositionIU.y, scale );
// Calculate the portion of the drawing that can be displayed in the
// client area at the current zoom level.
// visible viewport in device units ~ pixels
wxSize clientSizeDU = m_canvas->GetClientSize();
// Size of the client window in IU
DSIZE clientSizeIU( clientSizeDU.x / scale, clientSizeDU.y / scale );
// Full drawing or "page" rectangle in internal units
DBOX pageRectIU( wxPoint( 0, 0 ), wxSize( GetPageSizeIU().x, GetPageSizeIU().y ) );
// The upper left corner of the client rectangle in internal units.
double xIU = aCenterPositionIU.x - clientSizeIU.x / 2.0;
double yIU = aCenterPositionIU.y - clientSizeIU.y / 2.0;
// If drawn around the center, adjust the client rectangle accordingly.
if( screen->m_Center )
{
// half page offset.
xIU += pageRectIU.GetWidth() / 2.0;
yIU += pageRectIU.GetHeight() / 2.0;
}
DBOX clientRectIU( wxPoint( xIU, yIU ), wxSize( clientSizeIU.x, clientSizeIU.y ) );
wxPoint centerPositionIU;
// put "int" limits on the clientRect
if( clientRectIU.GetLeft() < VIRT_MIN )
clientRectIU.MoveLeftTo( VIRT_MIN );
if( clientRectIU.GetTop() < VIRT_MIN )
clientRectIU.MoveTopTo( VIRT_MIN );
if( clientRectIU.GetRight() > VIRT_MAX )
clientRectIU.MoveRightTo( VIRT_MAX );
if( clientRectIU.GetBottom() > VIRT_MAX )
clientRectIU.MoveBottomTo( VIRT_MAX );
centerPositionIU.x = KiROUND( clientRectIU.GetX() + clientRectIU.GetWidth() / 2 );
centerPositionIU.y = KiROUND( clientRectIU.GetY() + clientRectIU.GetHeight() / 2 );
if( screen->m_Center )
{
centerPositionIU.x -= KiROUND( pageRectIU.GetWidth() / 2.0 );
centerPositionIU.y -= KiROUND( pageRectIU.GetHeight() / 2.0 );
}
DSIZE virtualSizeIU;
if( pageRectIU.GetLeft() < clientRectIU.GetLeft() && pageRectIU.GetRight() > clientRectIU.GetRight() )
{
virtualSizeIU.x = pageRectIU.GetSize().x;
}
else
{
double pageCenterX = pageRectIU.GetX() + ( pageRectIU.GetWidth() / 2 );
double clientCenterX = clientRectIU.GetX() + ( clientRectIU.GetWidth() / 2 );
if( clientRectIU.GetWidth() > pageRectIU.GetWidth() )
{
if( pageCenterX > clientCenterX )
virtualSizeIU.x = ( pageCenterX - clientRectIU.GetLeft() ) * 2;
else if( pageCenterX < clientCenterX )
virtualSizeIU.x = ( clientRectIU.GetRight() - pageCenterX ) * 2;
else
virtualSizeIU.x = clientRectIU.GetWidth();
}
else
{
if( pageCenterX > clientCenterX )
virtualSizeIU.x = pageRectIU.GetWidth() + ( (pageRectIU.GetLeft() - clientRectIU.GetLeft() ) * 2 );
else if( pageCenterX < clientCenterX )
virtualSizeIU.x = pageRectIU.GetWidth() + ( (clientRectIU.GetRight() - pageRectIU.GetRight() ) * 2 );
else
virtualSizeIU.x = pageRectIU.GetWidth();
}
}
if( pageRectIU.GetTop() < clientRectIU.GetTop() && pageRectIU.GetBottom() > clientRectIU.GetBottom() )
{
virtualSizeIU.y = pageRectIU.GetSize().y;
}
else
{
double pageCenterY = pageRectIU.GetY() + ( pageRectIU.GetHeight() / 2 );
double clientCenterY = clientRectIU.GetY() + ( clientRectIU.GetHeight() / 2 );
if( clientRectIU.GetHeight() > pageRectIU.GetHeight() )
{
if( pageCenterY > clientCenterY )
virtualSizeIU.y = ( pageCenterY - clientRectIU.GetTop() ) * 2;
else if( pageCenterY < clientCenterY )
virtualSizeIU.y = ( clientRectIU.GetBottom() - pageCenterY ) * 2;
else
virtualSizeIU.y = clientRectIU.GetHeight();
}
else
{
if( pageCenterY > clientCenterY )
virtualSizeIU.y = pageRectIU.GetHeight() +
( ( pageRectIU.GetTop() - clientRectIU.GetTop() ) * 2 );
else if( pageCenterY < clientCenterY )
virtualSizeIU.y = pageRectIU.GetHeight() +
( ( clientRectIU.GetBottom() - pageRectIU.GetBottom() ) * 2 );
else
virtualSizeIU.y = pageRectIU.GetHeight();
}
}
// put "int" limits on the virtualSizeIU
virtualSizeIU.x = std::min( virtualSizeIU.x, MAX_AXIS );
virtualSizeIU.y = std::min( virtualSizeIU.y, MAX_AXIS );
if( screen->m_Center )
{
screen->m_DrawOrg.x = -KiROUND( virtualSizeIU.x / 2.0 );
screen->m_DrawOrg.y = -KiROUND( virtualSizeIU.y / 2.0 );
}
else
{
screen->m_DrawOrg.x = -KiROUND( ( virtualSizeIU.x - pageRectIU.GetWidth() ) / 2.0 );
screen->m_DrawOrg.y = -KiROUND( ( virtualSizeIU.y - pageRectIU.GetHeight() ) / 2.0 );
}
/* Always set scrollbar pixels per unit to 1 unless you want the zoom
* around cursor to jump around. This reported problem occurs when the
* zoom point is not on a pixel per unit increment. If you set the
* pixels per unit to 10, you have potential for the zoom point to
* jump around +/-5 pixels from the nearest grid point.
*/
screen->m_ScrollPixelsPerUnitX = screen->m_ScrollPixelsPerUnitY = 1;
// Number of scroll bar units for the given zoom level in device units.
double unitsX = virtualSizeIU.x * scale;
double unitsY = virtualSizeIU.y * scale;
// Calculate the scroll bar position in internal units to place the
// center position at the center of client rectangle.
SetScrollCenterPosition( centerPositionIU );
double posX = centerPositionIU.x - clientRectIU.GetWidth() / 2.0 - screen->m_DrawOrg.x;
double posY = centerPositionIU.y - clientRectIU.GetHeight() / 2.0 - screen->m_DrawOrg.y;
// Convert scroll bar position to device units.
posX = KiROUND( posX * scale );
posY = KiROUND( posY * scale );
if( posX < 0 )
{
wxLogTrace( traceScrollSettings, wxT( "Required scroll bar X position %.10g" ), posX );
posX = 0;
}
if( posX > unitsX )
{
wxLogTrace( traceScrollSettings, wxT( "Required scroll bar X position %.10g" ), posX );
posX = unitsX;
}
if( posY < 0 )
{
wxLogTrace( traceScrollSettings, wxT( "Required scroll bar Y position %.10g" ), posY );
posY = 0;
}
if( posY > unitsY )
{
wxLogTrace( traceScrollSettings, wxT( "Required scroll bar Y position %.10g" ), posY );
posY = unitsY;
}
screen->m_ScrollbarPos = wxPoint( KiROUND( posX ), KiROUND( posY ) );
screen->m_ScrollbarNumber = wxSize( KiROUND( unitsX ), KiROUND( unitsY ) );
wxLogTrace( traceScrollSettings,
wxT( "Drawing = (%.10g, %.10g), Client = (%.10g, %.10g), Offset = (%d, %d), SetScrollbars(%d, %d, %d, %d, %d, %d)" ),
virtualSizeIU.x, virtualSizeIU.y, clientSizeIU.x, clientSizeIU.y,
screen->m_DrawOrg.x, screen->m_DrawOrg.y,
screen->m_ScrollPixelsPerUnitX, screen->m_ScrollPixelsPerUnitY,
screen->m_ScrollbarNumber.x, screen->m_ScrollbarNumber.y,
screen->m_ScrollbarPos.x, screen->m_ScrollbarPos.y );
bool noRefresh = true;
m_canvas->SetScrollbars( screen->m_ScrollPixelsPerUnitX,
screen->m_ScrollPixelsPerUnitY,
screen->m_ScrollbarNumber.x,
screen->m_ScrollbarNumber.y,
screen->m_ScrollbarPos.x,
screen->m_ScrollbarPos.y, noRefresh );
}
FOOTPRINT_WIZARD_FRAME::FOOTPRINT_WIZARD_FRAME( KIWAY* aKiway,
wxWindow* aParent, FRAME_T aFrameType ) :
PCB_BASE_FRAME( aKiway, aParent, aFrameType, _( "Footprint Wizard" ),
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT,
FOOTPRINT_WIZARD_FRAME_NAME )
{
wxASSERT( aFrameType==FRAME_PCB_FOOTPRINT_WIZARD_MODAL );
if( aFrameType == FRAME_PCB_FOOTPRINT_WIZARD_MODAL )
SetModal( true );
wxAcceleratorTable table( ACCEL_TABLE_CNT, accels );
m_FrameName = FOOTPRINT_WIZARD_FRAME_NAME;
m_configPath = wxT( "FootprintWizard" );
m_showAxis = true; // true to draw axis.
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( module_wizard_xpm) );
SetIcon( icon );
m_HotkeysZoomAndGridList = g_Module_Viewer_Hokeys_Descr;
m_wizardName.Empty();
SetBoard( new BOARD() );
// Ensure all layers and items are visible:
GetBoard()->SetVisibleAlls();
SetScreen( new PCB_SCREEN( GetPageSizeIU() ) );
GetScreen()->m_Center = true; // Center coordinate origins on screen.
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
ReCreateHToolbar();
ReCreateVToolbar();
// Creates the parameter pages list
m_pageList = new wxListBox( this, ID_FOOTPRINT_WIZARD_PAGE_LIST,
wxDefaultPosition, wxDefaultSize,
0, NULL, wxLB_HSCROLL );
// Creates the The list of parameters for the current parameter page
m_parameterGrid = new wxGrid( this, ID_FOOTPRINT_WIZARD_PARAMETER_LIST );
m_parameterGrid->CreateGrid( 1, 3 );
// Columns
m_parameterGrid->SetColLabelValue( 0, _( "Parameter" ) );
m_parameterGrid->SetColLabelValue( 1, _( "Value" ) );
m_parameterGrid->SetColLabelValue( 2, _( "Units" ) );
m_parameterGrid->SetColLabelAlignment( wxALIGN_LEFT, wxALIGN_CENTRE );
m_parameterGrid->AutoSizeColumns();
ReCreatePageList();
DisplayWizardInfos();
if( m_canvas )
m_canvas->SetAcceleratorTable( table );
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiztb;
horiztb.HorizontalToolbarPane();
EDA_PANEINFO info;
info.InfoToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Manage main toolbal
m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiztb ).
Name( wxT ("m_mainToolBar" ) ).Top().Row( 0 ) );
// Manage the left window (list of parameter pages)
EDA_PANEINFO paneList;
paneList.InfoToolbarPane().Name( wxT( "m_pageList" ) ).Left().Row( 0 );
m_auimgr.AddPane( m_pageList, wxAuiPaneInfo( paneList ) );
// Manage the parameters grid editor for the current parameter page
EDA_PANEINFO panePrms;
panePrms.InfoToolbarPane().Name( wxT( "m_parameterGrid" ) ).Left().Row( 1 );
m_auimgr.AddPane( m_parameterGrid, wxAuiPaneInfo( panePrms ) );
// Manage the draw panel
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
// Manage the message panel
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(1) );
// Gives a min size and the last saved size to left windows
m_auimgr.GetPane( m_pageList ).MinSize( wxSize(60, -1 ) );
m_auimgr.GetPane( m_pageList ).BestSize( wxSize(m_pageListWidth, -1) );
m_auimgr.GetPane( m_parameterGrid ).MinSize( wxSize( 120, -1 ) );
m_auimgr.GetPane( m_parameterGrid ).BestSize( wxSize(m_parameterGridWidth, -1) );
m_auimgr.Update();
// Now Drawpanel is sized, we can use BestZoom to show the component (if any)
#ifdef USE_WX_GRAPHICS_CONTEXT
GetScreen()->SetZoom( BestZoom() );
#else
Zoom_Automatique( false );
#endif
Show( true );
this->SelectFootprintWizard();
}
bool PCB_EDIT_FRAME::AppendBoardFile( const wxString& aFullFileName, int aCtl )
{
IO_MGR::PCB_FILE_T pluginType = plugin_type( aFullFileName, aCtl );
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
// keep trace of existing items, in order to know what are the new items
// (for undo command for instance)
// Tracks are inserted, not append, so mark existing tracks to know what are
// the new tracks
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
track->SetFlags( FLAG0 );
// Other items are append to the item list, so keep trace to the
// last existing item is enough
MODULE* module = GetBoard()->m_Modules.GetLast();
BOARD_ITEM* drawing = GetBoard()->m_Drawings.GetLast();
int zonescount = GetBoard()->GetAreaCount();
// Keep also the count of copper layers, because we can happen boards
// with different copper layers counts,
// and the enabled layers
int initialCopperLayerCount = GetBoard()->GetCopperLayerCount();
LSET initialEnabledLayers = GetBoard()->GetEnabledLayers();
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", GetPageSizeIU().x );
sprintf( ybuf, "%d", GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
GetDesignSettings().m_NetClasses.Clear();
pi->Load( aFullFileName, GetBoard(), &props );
}
catch( const IO_ERROR& ioe )
{
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
track->ClearFlags( FLAG0 );
wxString msg = wxString::Format( _(
"Error loading board.\n%s" ),
GetChars( ioe.What() )
);
DisplayError( this, msg );
return false;
}
// Now prepare a block move command to place the new items, and
// prepare the undo command.
BLOCK_SELECTOR& blockmove = GetScreen()->m_BlockLocate;
HandleBlockBegin( NULL, BLOCK_PRESELECT_MOVE, wxPoint( 0, 0) );
PICKED_ITEMS_LIST& blockitemsList = blockmove.GetItems();
PICKED_ITEMS_LIST undoListPicker;
ITEM_PICKER picker( NULL, UR_NEW );
EDA_RECT bbox; // the new items bounding box, for block move
bool bboxInit = true; // true until the bounding box is initialized
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
{
if( track->GetFlags() & FLAG0 )
{
track->ClearFlags( FLAG0 );
continue;
}
track->SetFlags( IS_MOVED );
picker.SetItem( track );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = track->GetBoundingBox();
else
bbox.Merge( track->GetBoundingBox() );
bboxInit = false;
}
if( module )
module = module->Next();
else
module = GetBoard()->m_Modules;
for( ; module; module = module->Next() )
{
module->SetFlags( IS_MOVED );
picker.SetItem( module );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = module->GetBoundingBox();
else
bbox.Merge( module->GetBoundingBox() );
bboxInit = false;
}
if( drawing )
drawing = drawing->Next();
else
drawing = GetBoard()->m_Drawings;
for( ; drawing; drawing = drawing->Next() )
{
drawing->SetFlags( IS_MOVED );
picker.SetItem( drawing );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = drawing->GetBoundingBox();
else
bbox.Merge( drawing->GetBoundingBox() );
bboxInit = false;
}
for( ZONE_CONTAINER* zone = GetBoard()->GetArea( zonescount ); zone;
zone = GetBoard()->GetArea( zonescount ) )
{
zone->SetFlags( IS_MOVED );
picker.SetItem( zone );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
zonescount++;
if( bboxInit )
bbox = zone->GetBoundingBox();
else
bbox.Merge( zone->GetBoundingBox() );
bboxInit = false;
}
SaveCopyInUndoList( undoListPicker, UR_NEW );
// we should not ask PLUGINs to do these items:
int copperLayerCount = GetBoard()->GetCopperLayerCount();
if( copperLayerCount > initialCopperLayerCount )
GetBoard()->SetCopperLayerCount( copperLayerCount );
// Enable all used layers, and make them visible:
LSET enabledLayers = GetBoard()->GetEnabledLayers();
enabledLayers |= initialEnabledLayers;
GetBoard()->SetEnabledLayers( enabledLayers );
GetBoard()->SetVisibleLayers( enabledLayers );
ReCreateLayerBox();
ReFillLayerWidget();
if( IsGalCanvasActive() )
static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() )->SyncLayersVisibility( GetBoard() );
GetBoard()->BuildListOfNets();
GetBoard()->SynchronizeNetsAndNetClasses();
SetStatusText( wxEmptyString );
BestZoom();
// Finish block move command:
wxPoint cpos = GetNearestGridPosition( bbox.Centre() );
blockmove.SetOrigin( bbox.GetOrigin() );
blockmove.SetSize( bbox.GetSize() );
blockmove.SetLastCursorPosition( cpos );
HandleBlockEnd( NULL );
return true;
}
DISPLAY_FOOTPRINTS_FRAME::DISPLAY_FOOTPRINTS_FRAME( KIWAY* aKiway, CVPCB_MAINFRAME* aParent ) :
PCB_BASE_FRAME( aKiway, aParent, FRAME_CVPCB_DISPLAY, _( "Footprint Viewer" ),
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE, FOOTPRINTVIEWER_FRAME_NAME )
{
m_showAxis = true; // true to draw axis.
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_cvpcb_xpm ) );
SetIcon( icon );
SetBoard( new BOARD() );
SetScreen( new PCB_SCREEN( GetPageSizeIU() ) );
LoadSettings( config() );
// Initialize grid id to a default value if not found in config or incorrect:
if( !( GetScreen()->GridExists( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 ) ) )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_500 - ID_POPUP_GRID_LEVEL_1000;
GetScreen()->SetGrid( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 );
// Initialize some display options
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
displ_opts->m_DisplayPadIsol = false; // Pad clearance has no meaning here
// Track and via clearance has no meaning here.
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) );
if( m_drawToolBar ) // Currently, no vertical right toolbar.
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right() );
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DisplayFrame" ) ).CentrePane() );
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() );
m_auimgr.Update();
Show( true );
}
FOOTPRINT_VIEWER_FRAME::FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType ) :
PCB_BASE_FRAME( aKiway, aParent, aFrameType, _( "Footprint Library Browser" ),
wxDefaultPosition, wxDefaultSize,
aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL ?
#ifdef __WINDOWS__
KICAD_DEFAULT_DRAWFRAME_STYLE | wxSTAY_ON_TOP :
#else
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT :
#endif
KICAD_DEFAULT_DRAWFRAME_STYLE,
FOOTPRINT_VIEWER_FRAME_NAME )
{
wxASSERT( aFrameType==FRAME_PCB_MODULE_VIEWER || aFrameType==FRAME_PCB_MODULE_VIEWER_MODAL );
if( aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL )
SetModal( true );
m_configFrameName = FOOTPRINT_VIEWER_FRAME_NAME;
m_showAxis = true; // true to draw axis.
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( modview_icon_xpm ) );
SetIcon( icon );
m_hotkeysDescrList = g_Module_Viewer_Hokeys_Descr;
m_libList = new wxListBox( this, ID_MODVIEW_LIB_LIST,
wxDefaultPosition, wxDefaultSize, 0, NULL, wxLB_HSCROLL );
m_footprintList = new wxListBox( this, ID_MODVIEW_FOOTPRINT_LIST,
wxDefaultPosition, wxDefaultSize, 0, NULL, wxLB_HSCROLL );
SetBoard( new BOARD() );
// In viewer, the default net clearance is not known (it depends on the actual board).
// So we do not show the default clearance, by setting it to 0
// The footprint or pad specific clearance will be shown
GetBoard()->GetDesignSettings().GetDefault()->SetClearance(0);
// Ensure all layers and items are visible:
GetBoard()->SetVisibleAlls();
SetScreen( new PCB_SCREEN( GetPageSizeIU() ) );
GetScreen()->m_Center = true; // Center coordinate origins on screen.
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
// Menu bar is not mandatory: uncomment/comment the next line
// to add/remove the menubar
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateLibraryList();
UpdateTitle();
PCB_BASE_FRAME* parentFrame = static_cast<PCB_BASE_FRAME*>( Kiway().Player( FRAME_PCB, true ) );
// Create GAL canvas
PCB_DRAW_PANEL_GAL* drawPanel = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize,
parentFrame->GetGalCanvas()->GetBackend() );
SetGalCanvas( drawPanel );
// Create the manager and dispatcher & route draw panel events to the dispatcher
m_toolManager = new TOOL_MANAGER;
m_toolManager->SetEnvironment( GetBoard(), drawPanel->GetView(),
drawPanel->GetViewControls(), this );
m_toolDispatcher = new TOOL_DISPATCHER( m_toolManager );
drawPanel->SetEventDispatcher( m_toolDispatcher );
m_toolManager->RegisterTool( new PCBNEW_CONTROL );
m_toolManager->ResetTools( TOOL_BASE::RUN );
// If a footprint was previously loaded, reload it
if( getCurNickname().size() && getCurFootprintName().size() )
{
FPID id;
id.SetLibNickname( getCurNickname() );
id.SetFootprintName( getCurFootprintName() );
GetBoard()->Add( loadFootprint( id ) );
}
drawPanel->DisplayBoard( m_Pcb );
updateView();
m_auimgr.SetManagedWindow( this );
wxSize minsize(100,-1); // Min size of list boxes
// Main toolbar is initially docked at the top of the main window and dockable on any side.
// The close button is disable because the footprint viewer has no main menu to re-enable it.
// The tool bar will only be dockable on the top or bottom of the main frame window. This is
// most likely due to the fact that the other windows are not dockable and are preventing the
// tool bar from docking on the right and left.
wxAuiPaneInfo toolbarPaneInfo;
toolbarPaneInfo.Name( wxT( "m_mainToolBar" ) ).ToolbarPane().Top().CloseButton( false );
EDA_PANEINFO info;
info.InfoToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Manage main toolbar, top pane
m_auimgr.AddPane( m_mainToolBar, toolbarPaneInfo );
// Manage the list of libraries, left pane.
m_auimgr.AddPane( m_libList,
wxAuiPaneInfo( info ).Name( wxT( "m_libList" ) )
.Left().Row( 1 ).MinSize( minsize ) );
// Manage the list of footprints, center pane.
m_auimgr.AddPane( m_footprintList,
wxAuiPaneInfo( info ).Name( wxT( "m_footprintList" ) )
.Left().Row( 2 ).MinSize( minsize ) );
// Manage the draw panel, right pane.
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
m_auimgr.AddPane( (wxWindow*) GetGalCanvas(),
wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() );
// Manage the message panel, bottom pane.
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom() );
if( !m_perspective.IsEmpty() )
{
// Restore last saved sizes, pos and other params
// However m_mainToolBar size cannot be set to its last saved size
// because the actual size change depending on the way modview was called:
// the tool to export the current footprint exist or not.
// and the saved size is not always OK
// the trick is to get the default toolbar size, and set the size after
// calling LoadPerspective
wxSize tbsize = m_mainToolBar->GetSize();
m_auimgr.LoadPerspective( m_perspective, false );
m_auimgr.GetPane( m_mainToolBar ).BestSize( tbsize );
}
// after changing something to the aui manager,
// call Update()() to reflect the changes
m_auimgr.Update();
// Now Drawpanel is sized, we can use BestZoom to show the component (if any)
#ifdef USE_WX_GRAPHICS_CONTEXT
GetScreen()->SetZoom( BestZoom() );
#else
Zoom_Automatique( false );
#endif
UseGalCanvas( parentFrame->IsGalCanvasActive() );
if( !IsModal() ) // For modal mode, calling ShowModal() will show this frame
{
Raise(); // On some window managers, this is needed
Show( true );
}
}
FOOTPRINT_VIEWER_FRAME::~FOOTPRINT_VIEWER_FRAME()
{
if( m_Draw3DFrame )
m_Draw3DFrame->Destroy();
}
void FOOTPRINT_VIEWER_FRAME::OnCloseWindow( wxCloseEvent& Event )
{
DBG(printf( "%s:\n", __func__ );)
if( IsGalCanvasActive() )
bool PCB_BASE_FRAME::ExportToHpglFile( const wxString& aFullFileName, int aLayer,
EDA_DRAW_MODE_T aTraceMode )
{
wxSize boardSize;
wxPoint boardCenter;
bool center = false;
double scale;
wxPoint offset;
LOCALE_IO toggle;
FILE* output_file = wxFopen( aFullFileName, wxT( "wt" ) );
if( output_file == NULL )
{
return false;
}
// Compute pen_dim (from g_m_HPGLPenDiam in mils) in pcb units,
// with plot scale (if Scale is 2, pen diameter is always g_m_HPGLPenDiam
// so apparent pen diam is real pen diam / Scale
int pen_diam = wxRound( (g_PcbPlotOptions.m_HPGLPenDiam * U_PCB) /
g_PcbPlotOptions.m_PlotScale );
// compute pen_overlay (from g_m_HPGLPenOvr in mils) with plot scale
if( g_PcbPlotOptions.m_HPGLPenOvr < 0 )
g_PcbPlotOptions.m_HPGLPenOvr = 0;
if( g_PcbPlotOptions.m_HPGLPenOvr >= g_PcbPlotOptions.m_HPGLPenDiam )
g_PcbPlotOptions.m_HPGLPenOvr = g_PcbPlotOptions.m_HPGLPenDiam - 1;
int pen_overlay = wxRound( g_PcbPlotOptions.m_HPGLPenOvr * 10.0 /
g_PcbPlotOptions.m_PlotScale );
if( g_PcbPlotOptions.m_PlotScale != 1.0 || g_PcbPlotOptions.m_AutoScale )
{
// when scale != 1.0 we must calculate the position in page
// because actual position has no meaning
center = true;
}
wxSize pageSizeIU = GetPageSizeIU();
// Calculate the center of the PCB
EDA_RECT bbbox = GetBoardBoundingBox();
boardSize = bbbox.GetSize();
boardCenter = bbbox.Centre();
if( g_PcbPlotOptions.m_AutoScale ) // Optimum scale
{
// Fit to 80% of the page
double Xscale = ( ( pageSizeIU.x * 0.8 ) / boardSize.x );
double Yscale = ( ( pageSizeIU.y * 0.8 ) / boardSize.y );
scale = MIN( Xscale, Yscale );
}
else
{
scale = g_PcbPlotOptions.m_PlotScale;
}
// Calculate the page size offset.
if( center )
{
offset.x = wxRound( (double) boardCenter.x -
( (double) pageSizeIU.x / 2.0 ) / scale );
offset.y = wxRound( (double) boardCenter.y -
( (double) pageSizeIU.y / 2.0 ) / scale );
}
else
{
offset.x = 0;
offset.y = 0;
}
HPGL_PLOTTER* plotter = new HPGL_PLOTTER();
plotter->SetPageSettings( GetPageSettings() );
plotter->set_viewport( offset, scale, g_PcbPlotOptions.m_PlotMirror );
plotter->set_default_line_width( g_PcbPlotOptions.m_PlotLineWidth );
plotter->set_creator( wxT( "PCBNEW-HPGL" ) );
plotter->set_filename( aFullFileName );
plotter->set_pen_speed( g_PcbPlotOptions.m_HPGLPenSpeed );
plotter->set_pen_number( g_PcbPlotOptions.m_HPGLPenNum );
plotter->set_pen_overlap( pen_overlay );
plotter->set_pen_diameter( pen_diam );
plotter->start_plot( output_file );
// The worksheet is not significant with scale!=1... It is with paperscale!=1, anyway
if( g_PcbPlotOptions.m_PlotFrameRef && !center )
PlotWorkSheet( plotter, GetScreen() );
Plot_Layer( plotter, aLayer, aTraceMode );
plotter->end_plot();
delete plotter;
return true;
}
FOOTPRINT_WIZARD_FRAME::FOOTPRINT_WIZARD_FRAME( KIWAY* aKiway,
wxWindow* aParent, FRAME_T aFrameType ) :
PCB_BASE_FRAME( aKiway, aParent, aFrameType, _( "Footprint Wizard" ),
wxDefaultPosition, wxDefaultSize,
aParent ? KICAD_DEFAULT_DRAWFRAME_STYLE | MODAL_MODE_EXTRASTYLE
: KICAD_DEFAULT_DRAWFRAME_STYLE | wxSTAY_ON_TOP,
FOOTPRINT_WIZARD_FRAME_NAME )
{
wxASSERT( aFrameType == FRAME_PCB_FOOTPRINT_WIZARD_MODAL );
// This frame is always show modal:
SetModal( true );
m_messagesFrame = NULL; // This windows will be created the first time a wizard is loaded
m_showAxis = true; // true to draw axis.
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( module_wizard_xpm) );
SetIcon( icon );
m_hotkeysDescrList = g_Module_Viewer_Hokeys_Descr;
m_wizardName.Empty();
SetBoard( new BOARD() );
// Ensure all layers and items are visible:
GetBoard()->SetVisibleAlls();
SetScreen( new PCB_SCREEN( GetPageSizeIU() ) );
GetScreen()->m_Center = true; // Center coordinate origins on screen.
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
// Set some display options here, because the FOOTPRINT_WIZARD_FRAME
// does not have a config menu to do that:
DISPLAY_OPTIONS* disp_opts = (DISPLAY_OPTIONS*) GetDisplayOptions();
disp_opts->m_DisplayPadIsol = false;
disp_opts->m_DisplayPadNum = true;
GetBoard()->SetElementVisibility( PCB_VISIBLE(NO_CONNECTS_VISIBLE), false );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
ReCreateHToolbar();
ReCreateVToolbar();
// Creates the parameter pages list
m_pageList = new wxListBox( this, ID_FOOTPRINT_WIZARD_PAGE_LIST,
wxDefaultPosition, wxDefaultSize,
0, NULL, wxLB_HSCROLL );
// Creates the The list of parameters for the current parameter page
initParameterGrid();
ReCreatePageList();
DisplayWizardInfos();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiztb;
horiztb.HorizontalToolbarPane();
EDA_PANEINFO info;
info.InfoToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Manage main toolbal
m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiztb ).
Name( wxT ("m_mainToolBar" ) ).Top().Row( 0 ) );
// Manage the left window (list of parameter pages)
EDA_PANEINFO paneList;
paneList.InfoToolbarPane().Name( wxT( "m_pageList" ) ).Left().Row( 0 );
m_auimgr.AddPane( m_pageList, wxAuiPaneInfo( paneList ) );
// Manage the parameters grid editor for the current parameter page
EDA_PANEINFO panePrms;
panePrms.InfoToolbarPane().Name( wxT( "m_parameterGrid" ) ).Left().Row( 1 );
m_auimgr.AddPane( m_parameterGrid, wxAuiPaneInfo( panePrms ) );
// Manage the draw panel
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
// Manage the message panel
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(1) );
// Gives a min size and the last saved size to left windows
m_auimgr.GetPane( m_pageList ).MinSize( wxSize(60, -1 ) );
m_auimgr.GetPane( m_pageList ).BestSize( wxSize(m_pageListWidth, -1) );
m_auimgr.GetPane( m_parameterGrid ).MinSize( wxSize( 120, -1 ) );
m_auimgr.GetPane( m_parameterGrid ).BestSize( wxSize(m_parameterGridWidth, -1) );
m_auimgr.Update();
// Now Drawpanel is sized, we can use BestZoom to show the component (if any)
#ifdef USE_WX_GRAPHICS_CONTEXT
GetScreen()->SetZoom( BestZoom() );
#else
Zoom_Automatique( false );
#endif
// Do not Run a dialog here: on some Window Managers, it creates issues.
// Reason: the FOOTPRINT_WIZARD_FRAME is run as modal;
// It means the call to FOOTPRINT_WIZARD_FRAME::ShowModal will change the
// Event Loop Manager, and stop the one created by the dialog.
// It does not happen on all W.M., perhaps due to the way the order events are called
// SelectFootprintWizard();
}
void FOOTPRINT_EDIT_FRAME::PrintPage( wxDC* aDC,
LSET aPrintMaskLayer,
bool aPrintMirrorMode,
void * aData)
{
GR_DRAWMODE drawmode = GR_COPY;
int defaultPenSize = Millimeter2iu( 0.2 );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
DISPLAY_OPTIONS save_opt;
PRINT_PARAMETERS * printParameters = (PRINT_PARAMETERS*) aData; // can be null
PRINT_PARAMETERS::DrillShapeOptT drillShapeOpt = PRINT_PARAMETERS::FULL_DRILL_SHAPE;
if( printParameters )
defaultPenSize = printParameters->m_PenDefaultSize;
save_opt = *displ_opts;
displ_opts->m_ContrastModeDisplay = false;
displ_opts->m_DisplayPadFill = true;
displ_opts->m_DisplayViaFill = true;
displ_opts->m_DisplayPadNum = false;
bool nctmp = GetBoard()->IsElementVisible(NO_CONNECTS_VISIBLE);
GetBoard()->SetElementVisibility(NO_CONNECTS_VISIBLE, false);
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdgeFill = FILLED;
displ_opts->m_DisplayModTextFill = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItemsFill = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
m_canvas->SetPrintMirrored( aPrintMirrorMode );
// The OR mode is used in color mode, but be aware the background *must be
// BLACK. In the print page dialog, we first print in BLACK, and after
// reprint in color, on the black "local" background, in OR mode the black
// print is not made before, only a white page is printed
if( GetGRForceBlackPenState() == false )
drawmode = GR_OR;
// Draw footprints, this is done at last in order to print the pad holes in
// white after the tracks and zones
int tmp = D_PAD::m_PadSketchModePenSize;
D_PAD::m_PadSketchModePenSize = defaultPenSize;
wxSize pageSizeIU = GetPageSizeIU() / 2;
wxPoint offset( pageSizeIU.x, pageSizeIU.y );
for( MODULE* module = GetBoard()->m_Modules; module; module = module->Next() )
{
module->Move( offset );
Print_Module( m_canvas, aDC, module, drawmode, aPrintMaskLayer, drillShapeOpt );
module->Move( -offset );
}
D_PAD::m_PadSketchModePenSize = tmp;
m_canvas->SetPrintMirrored( false );
*displ_opts = save_opt;
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, nctmp );
}
