bool SCH_LABEL::Load( LINE_READER& aLine, wxString& aErrorMsg )
{
char Name1[256];
char Name2[256];
char Name3[256];
int thickness = 0, size = 0, orient = 0;
Name1[0] = 0; Name2[0] = 0; Name3[0] = 0;
char* sline = (char*) aLine;
while( ( *sline != ' ' ) && *sline )
sline++;
// sline points the start of parameters
int ii = sscanf( sline, "%s %d %d %d %d %s %s %d", Name1, &m_Pos.x, &m_Pos.y,
&orient, &size, Name2, Name3, &thickness );
if( ii < 4 )
{
aErrorMsg.Printf( wxT( "Eeschema file label load error at line %d" ),
aLine.LineNumber() );
return false;
}
if( !aLine.ReadLine() )
{
aErrorMsg.Printf( wxT( "Eeschema file label load error atline %d" ),
aLine.LineNumber() );
return false;
}
if( size == 0 )
size = DEFAULT_SIZE_TEXT;
char* text = strtok( (char*) aLine, "\n\r" );
if( text == NULL )
{
aErrorMsg.Printf( wxT( "Eeschema file label load error at line %d" ),
aLine.LineNumber() );
return false;
}
m_Text = FROM_UTF8( text );
m_Size.x = m_Size.y = size;
SetOrientation( orient );
if( isdigit( Name3[0] ) )
{
thickness = atol( Name3 );
m_Bold = ( thickness != 0 );
m_Thickness = m_Bold ? GetPenSizeForBold( size ) : 0;
}
if( stricmp( Name2, "Italic" ) == 0 )
m_Italic = 1;
return true;
}
/**
* Function PLOTTER::Text
* same as DrawGraphicText, but plot graphic text insteed of draw it
* @param aPos = text position (according to aH_justify, aV_justify)
* @param aColor (COLOR4D) = text color
* @param aText = text to draw
* @param aOrient = angle in 0.1 degree
* @param aSize = text size (size.x or size.y can be < 0 for mirrored texts)
* @param aH_justify = horizontal justification (Left, center, right)
* @param aV_justify = vertical justification (bottom, center, top)
* @param aWidth = line width (pen width) (default = 0)
* if width < 0 : draw segments in sketch mode, width = abs(width)
* Use a value min(aSize.x, aSize.y) / 5 for a bold text
* @param aItalic = true to simulate an italic font
* @param aBold = true to use a bold font Useful only with default width value (aWidth = 0)
* @param aMultilineAllowed = true to plot text as multiline, otherwise single line
*/
void PLOTTER::Text( const wxPoint& aPos,
const COLOR4D aColor,
const wxString& aText,
double aOrient,
const wxSize& aSize,
enum EDA_TEXT_HJUSTIFY_T aH_justify,
enum EDA_TEXT_VJUSTIFY_T aV_justify,
int aWidth,
bool aItalic,
bool aBold,
bool aMultilineAllowed,
void* aData )
{
int textPensize = aWidth;
if( textPensize == 0 && aBold ) // Use default values if aWidth == 0
textPensize = GetPenSizeForBold( std::min( aSize.x, aSize.y ) );
if( textPensize >= 0 )
textPensize = Clamp_Text_PenSize( aWidth, aSize, aBold );
else
textPensize = -Clamp_Text_PenSize( -aWidth, aSize, aBold );
SetCurrentLineWidth( textPensize, aData );
SetColor( aColor );
DrawGraphicText( NULL, NULL, aPos, aColor, aText,
aOrient, aSize,
aH_justify, aV_justify,
textPensize, aItalic, aBold, NULL, this );
if( aWidth != textPensize )
SetCurrentLineWidth( aWidth, aData );
}
void DIALOG_LABEL_EDITOR::TextPropertiesAccept( wxCommandEvent& aEvent )
{
wxString text;
int value;
/* save old text in undo list if not already in edit */
/* or the label to be edited is part of a block */
if( m_CurrentText->GetFlags() == 0 ||
m_Parent->GetScreen()->m_BlockLocate.GetState() != STATE_NO_BLOCK )
m_Parent->SaveCopyInUndoList( m_CurrentText, UR_CHANGED );
m_Parent->GetCanvas()->RefreshDrawingRect( m_CurrentText->GetBoundingBox() );
text = m_textLabel->GetValue();
if( !text.IsEmpty() )
m_CurrentText->m_Text = text;
else if( !m_CurrentText->IsNew() )
{
DisplayError( this, _( "Empty Text!" ) );
return;
}
m_CurrentText->SetOrientation( m_TextOrient->GetSelection() );
text = m_TextSize->GetValue();
value = ReturnValueFromString( g_UserUnit, text );
m_CurrentText->m_Size.x = m_CurrentText->m_Size.y = value;
if( m_TextShape )
m_CurrentText->SetShape( m_TextShape->GetSelection() );
int style = m_TextStyle->GetSelection();
if( ( style & 1 ) )
m_CurrentText->m_Italic = 1;
else
m_CurrentText->m_Italic = 0;
if( ( style & 2 ) )
{
m_CurrentText->m_Bold = true;
m_CurrentText->m_Thickness = GetPenSizeForBold( m_CurrentText->m_Size.x );
}
else
{
m_CurrentText->m_Bold = false;
m_CurrentText->m_Thickness = 0;
}
m_Parent->OnModify();
/* Make the text size as new default size if it is a new text */
if( m_CurrentText->IsNew() )
m_Parent->SetDefaultLabelSize( m_CurrentText->m_Size.x );
m_Parent->GetCanvas()->RefreshDrawingRect( m_CurrentText->GetBoundingBox() );
m_Parent->GetCanvas()->MoveCursorToCrossHair();
EndModal( wxID_OK );
}
void DIALOG_LABEL_EDITOR::TextPropertiesAccept( wxCommandEvent& aEvent )
{
wxString text;
int value;
/* save old text in undo list if not already in edit */
/* or the label to be edited is part of a block */
if( m_CurrentText->GetFlags() == 0 ||
m_Parent->GetScreen()->m_BlockLocate.GetState() != STATE_NO_BLOCK )
m_Parent->SaveCopyInUndoList( m_CurrentText, UR_CHANGED );
m_Parent->GetCanvas()->RefreshDrawingRect( m_CurrentText->GetBoundingBox() );
text = m_textLabel->GetValue();
if( !text.IsEmpty() )
m_CurrentText->SetText( text );
else if( !m_CurrentText->IsNew() )
{
DisplayError( this, _( "Empty Text!" ) );
return;
}
m_CurrentText->SetOrientation( m_TextOrient->GetSelection() );
text = m_TextSize->GetValue();
value = ValueFromString( g_UserUnit, text );
m_CurrentText->SetSize( wxSize( value, value ) );
if( m_TextShape )
/// @todo move cast to widget
m_CurrentText->SetShape( static_cast<PINSHEETLABEL_SHAPE>( m_TextShape->GetSelection() ) );
int style = m_TextStyle->GetSelection();
m_CurrentText->SetItalic( ( style & 1 ) );
if( ( style & 2 ) )
{
m_CurrentText->SetBold( true );
m_CurrentText->SetThickness( GetPenSizeForBold( m_CurrentText->GetSize().x ) );
}
else
{
m_CurrentText->SetBold( false );
m_CurrentText->SetThickness( 0 );
}
m_Parent->OnModify();
// Make the text size the new default size ( if it is a new text ):
if( m_CurrentText->IsNew() )
SetDefaultTextSize( m_CurrentText->GetSize().x );
m_Parent->GetCanvas()->RefreshDrawingRect( m_CurrentText->GetBoundingBox() );
m_Parent->GetCanvas()->MoveCursorToCrossHair();
EndModal( wxID_OK );
}
void LIB_FIELD::drawGraphic( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aOffset,
EDA_COLOR_T aColor, GR_DRAWMODE aDrawMode, void* aData,
const TRANSFORM& aTransform )
{
wxPoint text_pos;
int color;
int linewidth = GetPenSize();
if( m_Bold )
linewidth = GetPenSizeForBold( m_Size.x );
else
linewidth = Clamp_Text_PenSize( linewidth, m_Size, m_Bold );
if( ( m_Attributs & TEXT_NO_VISIBLE ) && ( aColor < 0 ) )
{
color = GetInvisibleItemColor();
}
else if( IsSelected() && ( aColor < 0 ) )
{
color = GetItemSelectedColor();
}
else
{
color = aColor;
}
if( color < 0 )
color = GetDefaultColor();
text_pos = aTransform.TransformCoordinate( m_Pos ) + aOffset;
wxString text;
if( aData )
text = *(wxString*)aData;
else
text = m_Text;
GRSetDrawMode( aDC, aDrawMode );
EDA_RECT* clipbox = aPanel? aPanel->GetClipBox() : NULL;
DrawGraphicText( clipbox, aDC, text_pos, (EDA_COLOR_T) color, text, m_Orient, m_Size,
m_HJustify, m_VJustify, linewidth, m_Italic, m_Bold );
/* Set to one (1) to draw bounding box around field text to validate
* bounding box calculation. */
#if 0
EDA_RECT bBox = GetBoundingBox();
EDA_RECT grBox;
grBox.SetOrigin( aTransform.TransformCoordinate( bBox.GetOrigin() ) );
grBox.SetEnd( aTransform.TransformCoordinate( bBox.GetEnd() ) );
grBox.Move( aOffset );
GRRect( clipbox, aDC, grBox, 0, LIGHTMAGENTA );
#endif
}
/**
* Function DrawGraphicText
* Draw a graphic text (like module texts)
* @param aClipBox = the clipping rect, or NULL if no clipping
* @param aDC = the current Device Context. NULL if draw within a 3D GL Canvas
* @param aPos = text position (according to h_justify, v_justify)
* @param aColor (COLOR4D) = text color
* @param aText = text to draw
* @param aOrient = angle in 0.1 degree
* @param aSize = text size (size.x or size.y can be < 0 for mirrored texts)
* @param aH_justify = horizontal justification (Left, center, right)
* @param aV_justify = vertical justification (bottom, center, top)
* @param aWidth = line width (pen width) (use default width if aWidth = 0)
* if width < 0 : draw segments in sketch mode, width = abs(width)
* Use a value min(aSize.x, aSize.y) / 5 for a bold text
* @param aItalic = true to simulate an italic font
* @param aBold = true to use a bold font. Useful only with default width value (aWidth = 0)
* @param aCallback() = function called (if non null) to draw each segment.
* used to draw 3D texts or for plotting, NULL for normal drawings
* @param aPlotter = a pointer to a PLOTTER instance, when this function is used to plot
* the text. NULL to draw this text.
*/
void DrawGraphicText( EDA_RECT* aClipBox,
wxDC* aDC,
const wxPoint& aPos,
COLOR4D aColor,
const wxString& aText,
double aOrient,
const wxSize& aSize,
enum EDA_TEXT_HJUSTIFY_T aH_justify,
enum EDA_TEXT_VJUSTIFY_T aV_justify,
int aWidth,
bool aItalic,
bool aBold,
void (* aCallback)( int x0, int y0, int xf, int yf ),
PLOTTER* aPlotter )
{
bool fill_mode = true;
if( aWidth == 0 && aBold ) // Use default values if aWidth == 0
aWidth = GetPenSizeForBold( std::min( aSize.x, aSize.y ) );
if( aWidth < 0 )
{
aWidth = -aWidth;
fill_mode = false;
}
basic_gal.SetIsFill( fill_mode );
basic_gal.SetLineWidth( aWidth );
EDA_TEXT dummy;
dummy.SetItalic( aItalic );
dummy.SetBold( aBold );
dummy.SetHorizJustify( aH_justify );
dummy.SetVertJustify( aV_justify );
wxSize size = aSize;
dummy.SetMirrored( size.x < 0 );
if( size.x < 0 )
size.x = - size.x;
dummy.SetTextSize( size );
basic_gal.SetTextAttributes( &dummy );
basic_gal.SetPlotter( aPlotter );
basic_gal.SetCallback( aCallback );
basic_gal.m_DC = aDC;
basic_gal.m_Color = aColor;
basic_gal.SetClipBox( aClipBox );
basic_gal.StrokeText( aText, VECTOR2D( aPos ), aOrient * M_PI/1800 );
}
int SCH_FIELD::GetPenSize() const
{
int pensize = m_Thickness;
if( pensize == 0 ) // Use default values for pen size
{
if( m_Bold )
pensize = GetPenSizeForBold( m_Size.x );
else
pensize = GetDefaultLineThickness();
}
// Clip pen size for small texts:
pensize = Clamp_Text_PenSize( pensize, m_Size, m_Bold );
return pensize;
}
int LIB_TEXT::GetPenSize() const
{
int pensize = GetThickness();
if( pensize == 0 ) // Use default values for pen size
{
if( IsBold() )
pensize = GetPenSizeForBold( GetTextWidth() );
else
pensize = GetDefaultLineThickness();
}
// Clip pen size for small texts:
pensize = Clamp_Text_PenSize( pensize, GetTextSize(), IsBold() );
return pensize;
}
void SCH_FIELD::Draw( EDA_DRAW_PANEL* panel, wxDC* DC,
const wxPoint& offset, GR_DRAWMODE DrawMode, EDA_COLOR_T Color )
{
int orient;
EDA_COLOR_T color;
wxPoint textpos;
SCH_COMPONENT* parentComponent = (SCH_COMPONENT*) m_Parent;
int LineWidth = m_Thickness;
if( LineWidth == 0 ) // Use default values for pen size
{
if( m_Bold )
LineWidth = GetPenSizeForBold( m_Size.x );
else
LineWidth = GetDefaultLineThickness();
}
// Clip pen size for small texts:
LineWidth = Clamp_Text_PenSize( LineWidth, m_Size, m_Bold );
if( ((m_Attributs & TEXT_NO_VISIBLE) && !m_forceVisible) || IsVoid() )
return;
GRSetDrawMode( DC, DrawMode );
// Calculate the text orientation according to the component orientation.
orient = m_Orient;
if( parentComponent->GetTransform().y1 ) // Rotate component 90 degrees.
{
if( orient == TEXT_ORIENT_HORIZ )
orient = TEXT_ORIENT_VERT;
else
orient = TEXT_ORIENT_HORIZ;
}
/* Calculate the text justification, according to the component
* orientation/mirror this is a bit complicated due to cumulative
* calculations:
* - numerous cases (mirrored or not, rotation)
* - the DrawGraphicText function recalculate also H and H justifications
* according to the text orientation.
* - When a component is mirrored, the text is not mirrored and
* justifications are complicated to calculate
* so the more easily way is to use no justifications ( Centered text )
* and use GetBoundaryBox to know the text coordinate considered as centered
*/
EDA_RECT boundaryBox = GetBoundingBox();
textpos = boundaryBox.Centre();
if( m_forceVisible )
{
color = DARKGRAY;
}
else
{
if( m_id == REFERENCE )
color = ReturnLayerColor( LAYER_REFERENCEPART );
else if( m_id == VALUE )
color = ReturnLayerColor( LAYER_VALUEPART );
else
color = ReturnLayerColor( LAYER_FIELDS );
}
DrawGraphicText( panel, DC, textpos, color, GetText(), orient, m_Size,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
LineWidth, m_Italic, m_Bold );
/* Enable this to draw the bounding box around the text field to validate
* the bounding box calculations.
*/
#if 0
// Draw boundary box:
GRRect( panel->GetClipBox(), DC, boundaryBox, 0, BROWN );
// Draw the text anchor point
/* Calculate the text position, according to the component
* orientation/mirror */
textpos = m_Pos - parentComponent->GetPosition();
textpos = parentComponent->GetScreenCoord( textpos );
textpos += parentComponent->GetPosition();
const int len = 10;
GRLine( panel->GetClipBox(), DC,
textpos.x - len, textpos.y, textpos.x + len, textpos.y, 0, BLUE );
GRLine( panel->GetClipBox(), DC,
textpos.x, textpos.y - len, textpos.x, textpos.y + len, 0, BLUE );
#endif
}
void SCH_FIELD::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aOffset,
GR_DRAWMODE aDrawMode, COLOR4D aColor )
{
int orient;
COLOR4D color;
wxPoint textpos;
SCH_COMPONENT* parentComponent = (SCH_COMPONENT*) m_Parent;
int lineWidth = GetThickness();
if( lineWidth == 0 ) // Use default values for pen size
{
if( IsBold() )
lineWidth = GetPenSizeForBold( GetTextWidth() );
else
lineWidth = GetDefaultLineThickness();
}
// Clip pen size for small texts:
lineWidth = Clamp_Text_PenSize( lineWidth, GetTextSize(), IsBold() );
if( ( !IsVisible() && !m_forceVisible) || IsVoid() )
return;
GRSetDrawMode( aDC, aDrawMode );
// Calculate the text orientation according to the component orientation.
orient = GetTextAngle();
if( parentComponent->GetTransform().y1 ) // Rotate component 90 degrees.
{
if( orient == TEXT_ANGLE_HORIZ )
orient = TEXT_ANGLE_VERT;
else
orient = TEXT_ANGLE_HORIZ;
}
/* Calculate the text justification, according to the component
* orientation/mirror this is a bit complicated due to cumulative
* calculations:
* - numerous cases (mirrored or not, rotation)
* - the DrawGraphicText function recalculate also H and H justifications
* according to the text orientation.
* - When a component is mirrored, the text is not mirrored and
* justifications are complicated to calculate
* so the more easily way is to use no justifications ( Centered text )
* and use GetBoundaryBox to know the text coordinate considered as centered
*/
EDA_RECT boundaryBox = GetBoundingBox();
textpos = boundaryBox.Centre() + aOffset;
if( m_forceVisible )
{
color = COLOR4D( DARKGRAY );
}
else
{
if( m_id == REFERENCE )
color = GetLayerColor( LAYER_REFERENCEPART );
else if( m_id == VALUE )
color = GetLayerColor( LAYER_VALUEPART );
else
color = GetLayerColor( LAYER_FIELDS );
}
EDA_RECT* clipbox = aPanel ? aPanel->GetClipBox() : NULL;
DrawGraphicText( clipbox, aDC, textpos, color, GetFullyQualifiedText(), orient, GetTextSize(),
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
lineWidth, IsItalic(), IsBold() );
// While moving: don't loose visual contact to which component this label belongs.
if ( IsWireImage() )
{
const wxPoint origin = parentComponent->GetPosition();
textpos = GetTextPos() - origin;
textpos = parentComponent->GetScreenCoord( textpos );
textpos += parentComponent->GetPosition();
GRLine( clipbox, aDC, origin, textpos, 2, DARKGRAY );
}
/* Enable this to draw the bounding box around the text field to validate
* the bounding box calculations.
*/
#if 0
// Draw boundary box:
GRRect( aPanel->GetClipBox(), aDC, boundaryBox, 0, BROWN );
// Draw the text anchor point
/* Calculate the text position, according to the component
* orientation/mirror */
textpos = m_Pos - parentComponent->GetPosition();
textpos = parentComponent->GetScreenCoord( textpos );
textpos += parentComponent->GetPosition();
const int len = 10;
GRLine( clipbox, aDC,
textpos.x - len, textpos.y, textpos.x + len, textpos.y, 0, BLUE );
GRLine( clipbox, aDC,
textpos.x, textpos.y - len, textpos.x, textpos.y + len, 0, BLUE );
#endif
}
/**
* Function PlotGraphicText
* same as DrawGraphicText, but plot graphic text insteed of draw it
* @param aPos = text position (according to aH_justify, aV_justify)
* @param aColor (enum EDA_COLOR_T) = text color
* @param aText = text to draw
* @param aOrient = angle in 0.1 degree
* @param aSize = text size (size.x or size.y can be < 0 for mirrored texts)
* @param aH_justify = horizontal justification (Left, center, right)
* @param aV_justify = vertical justification (bottom, center, top)
* @param aWidth = line width (pen width) (default = 0)
* if width < 0 : draw segments in sketch mode, width = abs(width)
* Use a value min(aSize.x, aSize.y) / 5 for a bold text
* @param aItalic = true to simulate an italic font
* @param aBold = true to use a bold font Useful only with default width value (aWidth = 0)
* @param aMultilineAllowed = true to plot text as multiline, otherwise single line
*/
void PLOTTER::Text( const wxPoint& aPos,
enum EDA_COLOR_T aColor,
const wxString& aText,
double aOrient,
const wxSize& aSize,
enum EDA_TEXT_HJUSTIFY_T aH_justify,
enum EDA_TEXT_VJUSTIFY_T aV_justify,
int aWidth,
bool aItalic,
bool aBold,
bool aMultilineAllowed )
{
int textPensize = aWidth;
if( textPensize == 0 && aBold ) // Use default values if aWidth == 0
textPensize = GetPenSizeForBold( std::min( aSize.x, aSize.y ) );
if( textPensize >= 0 )
textPensize = Clamp_Text_PenSize( aWidth, aSize, aBold );
else
textPensize = -Clamp_Text_PenSize( -aWidth, aSize, aBold );
SetCurrentLineWidth( textPensize );
if( aColor >= 0 )
SetColor( aColor );
if( aMultilineAllowed )
{
// EDA_TEXT needs for calculations of the position of every
// line according to orientation and justifications
wxArrayString strings;
EDA_TEXT* multilineText = new EDA_TEXT( aText );
multilineText->SetSize( aSize );
multilineText->SetTextPosition( aPos );
multilineText->SetOrientation( aOrient );
multilineText->SetHorizJustify( aH_justify );
multilineText->SetVertJustify( aV_justify );
multilineText->SetThickness( aWidth );
multilineText->SetMultilineAllowed( aMultilineAllowed );
std::vector<wxPoint> positions;
wxStringSplit( aText, strings, '\n' );
positions.reserve( strings.Count() );
multilineText->GetPositionsOfLinesOfMultilineText(
positions, strings.Count() );
for( unsigned ii = 0; ii < strings.Count(); ii++ )
{
wxString& txt = strings.Item( ii );
DrawGraphicText( NULL, NULL, positions[ii], aColor, txt,
aOrient, aSize,
aH_justify, aV_justify,
textPensize, aItalic, aBold, NULL, this );
}
delete multilineText;
}
else
{
DrawGraphicText( NULL, NULL, aPos, aColor, aText,
aOrient, aSize,
aH_justify, aV_justify,
textPensize, aItalic, aBold, NULL, this );
}
if( aWidth != textPensize )
SetCurrentLineWidth( aWidth );
}
/**
* Function DrawGraphicText
* Draw a graphic text (like module texts)
* @param aClipBox = the clipping rect, or NULL if no clipping
* @param aDC = the current Device Context. NULL if draw within a 3D GL Canvas
* @param aPos = text position (according to h_justify, v_justify)
* @param aColor (enum EDA_COLOR_T) = text color
* @param aText = text to draw
* @param aOrient = angle in 0.1 degree
* @param aSize = text size (size.x or size.y can be < 0 for mirrored texts)
* @param aH_justify = horizontal justification (Left, center, right)
* @param aV_justify = vertical justification (bottom, center, top)
* @param aWidth = line width (pen width) (use default width if aWidth = 0)
* if width < 0 : draw segments in sketch mode, width = abs(width)
* Use a value min(aSize.x, aSize.y) / 5 for a bold text
* @param aItalic = true to simulate an italic font
* @param aBold = true to use a bold font. Useful only with default width value (aWidth = 0)
* @param aCallback() = function called (if non null) to draw each segment.
* used to draw 3D texts or for plotting, NULL for normal drawings
* @param aPlotter = a pointer to a PLOTTER instance, when this function is used to plot
* the text. NULL to draw this text.
*/
void DrawGraphicText( EDA_RECT* aClipBox,
wxDC* aDC,
const wxPoint& aPos,
EDA_COLOR_T aColor,
const wxString& aText,
double aOrient,
const wxSize& aSize,
enum EDA_TEXT_HJUSTIFY_T aH_justify,
enum EDA_TEXT_VJUSTIFY_T aV_justify,
int aWidth,
bool aItalic,
bool aBold,
void (* aCallback)( int x0, int y0, int xf, int yf ),
PLOTTER* aPlotter )
{
int AsciiCode;
int x0, y0;
int size_h, size_v;
unsigned ptr;
int dx, dy; // Draw coordinate for segments to draw. also used in some other calculation
wxPoint current_char_pos; // Draw coordinates for the current char
wxPoint overbar_pos; // Start point for the current overbar
int overbar_italic_comp; // Italic compensation for overbar
#define BUF_SIZE 100
wxPoint coord[BUF_SIZE + 1]; // Buffer coordinate used to draw polylines (one char shape)
bool sketch_mode = false;
bool italic_reverse = false; // true for mirrored texts with m_Size.x < 0
size_h = aSize.x; /* PLEASE NOTE: H is for HORIZONTAL not for HEIGHT */
size_v = aSize.y;
if( aWidth == 0 && aBold ) // Use default values if aWidth == 0
aWidth = GetPenSizeForBold( std::min( aSize.x, aSize.y ) );
if( aWidth < 0 )
{
aWidth = -aWidth;
sketch_mode = true;
}
#ifdef CLIP_PEN // made by draw and plot functions
aWidth = Clamp_Text_PenSize( aWidth, aSize, aBold );
#endif
if( size_h < 0 ) // text is mirrored using size.x < 0 (mirror / Y axis)
italic_reverse = true;
unsigned char_count = NegableTextLength( aText );
if( char_count == 0 )
return;
current_char_pos = aPos;
dx = GraphicTextWidth( aText, size_h, aItalic, aWidth );
dy = size_v;
/* Do not draw the text if out of draw area! */
if( aClipBox )
{
int xm, ym, ll, xc, yc;
ll = std::abs( dx );
xc = current_char_pos.x;
yc = current_char_pos.y;
x0 = aClipBox->GetX() - ll;
y0 = aClipBox->GetY() - ll;
xm = aClipBox->GetRight() + ll;
ym = aClipBox->GetBottom() + ll;
if( xc < x0 )
return;
if( yc < y0 )
return;
if( xc > xm )
return;
if( yc > ym )
return;
}
/* Compute the position of the first letter of the text
* this position is the position of the left bottom point of the letter
* this is the same as the text position only for a left and bottom justified text
* In others cases, this position must be calculated from the text position ans size
*/
switch( aH_justify )
{
case GR_TEXT_HJUSTIFY_CENTER:
current_char_pos.x -= dx / 2;
break;
case GR_TEXT_HJUSTIFY_RIGHT:
current_char_pos.x -= dx;
break;
case GR_TEXT_HJUSTIFY_LEFT:
break;
}
switch( aV_justify )
{
case GR_TEXT_VJUSTIFY_CENTER:
current_char_pos.y += dy / 2;
break;
case GR_TEXT_VJUSTIFY_TOP:
current_char_pos.y += dy;
break;
case GR_TEXT_VJUSTIFY_BOTTOM:
break;
}
// Note: if aPanel == NULL, we are using a GL Canvas that handle scaling
if( aSize.x == 0 )
return;
/* if a text size is too small, the text cannot be drawn, and it is drawn as a single
* graphic line */
if( aDC && ( aDC->LogicalToDeviceYRel( std::abs( aSize.y ) ) < MIN_DRAWABLE_TEXT_SIZE ))
{
// draw the text as a line always vertically centered
wxPoint end( current_char_pos.x + dx, current_char_pos.y );
RotatePoint( ¤t_char_pos, aPos, aOrient );
RotatePoint( &end, aPos, aOrient );
if( aPlotter )
{
aPlotter->MoveTo( current_char_pos );
aPlotter->FinishTo( end );
}
else if( aCallback )
{
aCallback( current_char_pos.x, current_char_pos.y, end.x, end.y );
}
else
GRLine( aClipBox, aDC,
current_char_pos.x, current_char_pos.y, end.x, end.y, aWidth, aColor );
return;
}
if( aItalic )
{
overbar_italic_comp = OverbarPositionY( size_v ) / 8;
if( italic_reverse )
{
overbar_italic_comp = -overbar_italic_comp;
}
}
else
{
overbar_italic_comp = 0;
}
int overbars = 0; // Number of '~' seen (except '~~')
ptr = 0; // ptr = text index
while( ptr < char_count )
{
if( aText[ptr + overbars] == '~' )
{
if( ptr + overbars + 1 < aText.length()
&& aText[ptr + overbars + 1] == '~' ) /* '~~' draw as '~' */
ptr++; // skip first '~' char and draw second
else
{
// Found an overbar, adjust the pointers
overbars++;
if( overbars & 1 ) // odd overbars count
{
// Starting the overbar
overbar_pos = current_char_pos;
overbar_pos.x += overbar_italic_comp;
overbar_pos.y -= OverbarPositionY( size_v );
RotatePoint( &overbar_pos, aPos, aOrient );
}
else
{
// Ending the overbar
coord[0] = overbar_pos;
overbar_pos = current_char_pos;
overbar_pos.x += overbar_italic_comp;
overbar_pos.y -= OverbarPositionY( size_v );
RotatePoint( &overbar_pos, aPos, aOrient );
coord[1] = overbar_pos;
// Plot the overbar segment
DrawGraphicTextPline( aClipBox, aDC, aColor, aWidth,
sketch_mode, 2, coord, aCallback, aPlotter );
}
continue; // Skip ~ processing
}
}
AsciiCode = aText.GetChar( ptr + overbars );
const char* ptcar = GetHersheyShapeDescription( AsciiCode );
// Get metrics
int xsta = *ptcar++ - 'R';
int xsto = *ptcar++ - 'R';
int point_count = 0;
bool endcar = false;
while( !endcar )
{
int hc1, hc2;
hc1 = *ptcar++;
if( hc1 )
{
hc2 = *ptcar++;
}
else
{
// End of character, insert a synthetic pen up:
hc1 = ' ';
hc2 = 'R';
endcar = true;
}
// Do the Hershey decode thing:
// coordinates values are coded as <value> + 'R'
hc1 -= 'R';
hc2 -= 'R';
// Pen up request
if( hc1 == -50 && hc2 == 0 )
{
if( point_count )
{
if( aWidth <= 1 )
aWidth = 0;
DrawGraphicTextPline( aClipBox, aDC, aColor, aWidth,
sketch_mode, point_count, coord,
aCallback, aPlotter );
}
point_count = 0;
}
else
{
wxPoint currpoint;
hc1 -= xsta; hc2 -= 10; // Align the midpoint
hc1 = KiROUND( hc1 * size_h * s_HersheyScaleFactor );
hc2 = KiROUND( hc2 * size_v * s_HersheyScaleFactor );
// To simulate an italic font,
// add a x offset depending on the y offset
if( aItalic )
hc1 -= KiROUND( italic_reverse ? -hc2 / 8.0 : hc2 / 8.0 );
currpoint.x = hc1 + current_char_pos.x;
currpoint.y = hc2 + current_char_pos.y;
RotatePoint( &currpoint, aPos, aOrient );
coord[point_count] = currpoint;
if( point_count < BUF_SIZE - 1 )
point_count++;
}
} // end draw 1 char
ptr++;
// Apply the advance width
current_char_pos.x += KiROUND( size_h * (xsto - xsta) * s_HersheyScaleFactor );
}
if( overbars % 2 )
{
// Close the last overbar
coord[0] = overbar_pos;
overbar_pos = current_char_pos;
overbar_pos.y -= OverbarPositionY( size_v );
RotatePoint( &overbar_pos, aPos, aOrient );
coord[1] = overbar_pos;
// Plot the overbar segment
DrawGraphicTextPline( aClipBox, aDC, aColor, aWidth,
sketch_mode, 2, coord, aCallback, aPlotter );
}
}
void EDA_DRAW_FRAME::TraceWorkSheet( wxDC* DC, BASE_SCREEN* screen, int line_width )
{
if( !m_showBorderAndTitleBlock )
return;
const PAGE_INFO& pageInfo = GetPageSettings();
wxSize pageSize = pageInfo.GetSizeMils();
int ii, jj, xg, yg, ipas, gxpas, gypas;
wxPoint pos;
int refx, refy;
EDA_Colors Color;
wxString Line;
Ki_WorkSheetData* WsItem;
int scale = m_internalUnits / 1000;
wxSize size( SIZETEXT * scale, SIZETEXT * scale );
#if defined(KICAD_GOST)
wxSize size2( SIZETEXT * scale * 2, SIZETEXT * scale * 2);
wxSize size3( SIZETEXT * scale * 3, SIZETEXT * scale * 3);
wxSize size1_5( SIZETEXT * scale * 1.5, SIZETEXT * scale * 1.5);
#endif
wxSize size_ref( SIZETEXT_REF * scale, SIZETEXT_REF * scale );
wxString msg;
int UpperLimit = VARIABLE_BLOCK_START_POSITION;
int width = line_width;
Color = RED;
// if not printing, draw the page limits:
if( !screen->m_IsPrinting && g_ShowPageLimits )
{
GRSetDrawMode( DC, GR_COPY );
GRRect( m_canvas->GetClipBox(), DC, 0, 0,
pageSize.x * scale, pageSize.y * scale, width,
g_DrawBgColor == WHITE ? LIGHTGRAY : DARKDARKGRAY );
}
GRSetDrawMode( DC, GR_COPY );
// Draw the border.
// Upper left corner
refx = pageInfo.GetLeftMarginMils();
refy = pageInfo.GetTopMarginMils();
// lower right corner
xg = pageSize.x - pageInfo.GetRightMarginMils();
yg = pageSize.y - pageInfo.GetBottomMarginMils();
#if defined(KICAD_GOST)
GRRect( m_canvas->GetClipBox(), DC, refx * scale, refy * scale,
xg * scale, yg * scale, width, Color );
#else
for( ii = 0; ii < 2; ii++ )
{
GRRect( m_canvas->GetClipBox(), DC, refx * scale, refy * scale,
xg * scale, yg * scale, width, Color );
refx += GRID_REF_W; refy += GRID_REF_W;
xg -= GRID_REF_W; yg -= GRID_REF_W;
}
#endif
// Draw the reference legends.
refx = pageInfo.GetLeftMarginMils();
#if defined(KICAD_GOST)
refy = pageSize.y - pageInfo.GetBottomMarginMils(); // Lower left corner
for( WsItem = &WS_Segm1_LU; WsItem != NULL; WsItem = WsItem->Pnext )
{
pos.x = ( refx - WsItem->m_Posx ) * scale;
pos.y = ( refy - WsItem->m_Posy ) * scale;
msg.Empty();
switch( WsItem->m_Type )
{
case WS_CADRE:
break;
case WS_PODPIS_LU:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_VERT, size,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_BOTTOM,
width, false, false );
break;
case WS_SEGMENT_LU:
xg = pageInfo.GetLeftMarginMils() - WsItem->m_Endx;
yg = pageSize.y - pageInfo.GetBottomMarginMils() - WsItem->m_Endy;
GRLine( m_canvas->GetClipBox(), DC, pos.x, pos.y,
xg * scale, yg * scale, width, Color );
break;
}
}
refy = pageInfo.GetBottomMarginMils(); // Left Top corner
for( WsItem = &WS_Segm1_LT; WsItem != NULL; WsItem = WsItem->Pnext )
{
pos.x = ( refx + WsItem->m_Posx ) * scale;
pos.y = ( refy + WsItem->m_Posy ) * scale;
msg.Empty();
switch( WsItem->m_Type )
{
case WS_SEGMENT_LT:
xg = pageInfo.GetLeftMarginMils() + WsItem->m_Endx;
yg = pageInfo.GetBottomMarginMils() + WsItem->m_Endy;
GRLine( m_canvas->GetClipBox(), DC, pos.x, pos.y,
xg * scale, yg * scale, width, Color );
break;
}
}
#else
// Upper left corner
refy = pageInfo.GetTopMarginMils();
// lower right corner
xg = pageSize.x - pageInfo.GetRightMarginMils();
yg = pageSize.y - pageInfo.GetBottomMarginMils();
ipas = ( xg - refx ) / PAS_REF;
gxpas = ( xg - refx ) / ipas;
for( ii = refx + gxpas, jj = 1; ipas > 0; ii += gxpas, jj++, ipas-- )
{
Line.Printf( wxT( "%d" ), jj );
if( ii < xg - PAS_REF / 2 )
{
GRLine( m_canvas->GetClipBox(), DC, ii * scale, refy * scale,
ii * scale, ( refy + GRID_REF_W ) * scale, width, Color );
}
DrawGraphicText( m_canvas, DC,
wxPoint( ( ii - gxpas / 2 ) * scale,
( refy + GRID_REF_W / 2 ) * scale ),
Color, Line, TEXT_ORIENT_HORIZ, size_ref,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
if( ii < xg - PAS_REF / 2 )
{
GRLine( m_canvas->GetClipBox(), DC, ii * scale, yg * scale,
ii * scale, ( yg - GRID_REF_W ) * scale, width, Color );
}
DrawGraphicText( m_canvas, DC,
wxPoint( ( ii - gxpas / 2 ) * scale,
( yg - GRID_REF_W / 2) * scale ),
Color, Line, TEXT_ORIENT_HORIZ, size_ref,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
}
ipas = ( yg - refy ) / PAS_REF;
gypas = ( yg - refy ) / ipas;
for( ii = refy + gypas, jj = 0; ipas > 0; ii += gypas, jj++, ipas-- )
{
if( jj < 26 )
Line.Printf( wxT( "%c" ), jj + 'A' );
else // I hope 52 identifiers are enought...
Line.Printf( wxT( "%c" ), 'a' + jj - 26 );
if( ii < yg - PAS_REF / 2 )
{
GRLine( m_canvas->GetClipBox(), DC, refx * scale, ii * scale,
( refx + GRID_REF_W ) * scale, ii * scale, width, Color );
}
DrawGraphicText( m_canvas, DC,
wxPoint( ( refx + GRID_REF_W / 2 ) * scale,
( ii - gypas / 2 ) * scale ),
Color, Line, TEXT_ORIENT_HORIZ, size_ref,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
if( ii < yg - PAS_REF / 2 )
{
GRLine( m_canvas->GetClipBox(), DC, xg * scale, ii * scale,
( xg - GRID_REF_W ) * scale, ii * scale, width, Color );
}
DrawGraphicText( m_canvas, DC,
wxPoint( ( xg - GRID_REF_W / 2 ) * scale,
( ii - gxpas / 2 ) * scale ),
Color, Line, TEXT_ORIENT_HORIZ, size_ref,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
}
#endif
#if defined(KICAD_GOST)
// lower right corner
refx = pageSize.x - pageInfo.GetRightMarginMils();
refy = pageSize.y - pageInfo.GetBottomMarginMils();
if( screen->m_ScreenNumber == 1 )
{
for( WsItem = &WS_Date; WsItem != NULL; WsItem = WsItem->Pnext )
{
pos.x = (refx - WsItem->m_Posx) * scale;
pos.y = (refy - WsItem->m_Posy) * scale;
msg.Empty();
switch( WsItem->m_Type )
{
case WS_DATE:
break;
case WS_REV:
break;
case WS_KICAD_VERSION:
break;
case WS_PODPIS:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
break;
case WS_SIZESHEET:
break;
case WS_IDENTSHEET:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
if( screen->m_NumberOfScreen > 1 )
msg << screen->m_ScreenNumber;
DrawGraphicText( m_canvas, DC, pos, Color, msg,
TEXT_ORIENT_HORIZ, size, GR_TEXT_HJUSTIFY_LEFT,
GR_TEXT_VJUSTIFY_CENTER, width, false, false );
break;
case WS_SHEETS:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg << screen->m_NumberOfScreen;
DrawGraphicText( m_canvas, DC, pos, Color, msg,
TEXT_ORIENT_HORIZ, size, GR_TEXT_HJUSTIFY_LEFT,
GR_TEXT_VJUSTIFY_CENTER, width, false, false );
break;
case WS_COMPANY_NAME:
msg = GetTitleBlock().GetCompany();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size1_5,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
width,
false, false );
}
break;
case WS_TITLE:
msg = GetTitleBlock().GetTitle();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size1_5,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
width,
false, false );
}
break;
case WS_COMMENT1:
msg = GetTitleBlock().GetComment1();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size3,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
width,
false, false );
pos.x = (pageInfo.GetLeftMarginMils() + 1260) * scale;
pos.y = (pageInfo.GetTopMarginMils() + 270) * scale;
DrawGraphicText( m_canvas, DC, pos, Color,
msg, 1800, size2,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
width,
false, false );
}
break;
case WS_COMMENT2:
msg = GetTitleBlock().GetComment2();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
}
break;
case WS_COMMENT3:
msg = GetTitleBlock().GetComment3();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
}
break;
case WS_COMMENT4:
msg = GetTitleBlock().GetComment4();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
}
break;
case WS_UPPER_SEGMENT:
case WS_LEFT_SEGMENT:
WS_MostUpperLine.m_Posy = WS_MostUpperLine.m_Endy =
WS_MostLeftLine.m_Posy = STAMP_OY;
pos.y = ( refy - WsItem->m_Posy ) * scale;
case WS_SEGMENT:
xg = pageSize.x -
pageInfo.GetRightMarginMils() - WsItem->m_Endx;
yg = pageSize.y -
pageInfo.GetBottomMarginMils() - WsItem->m_Endy;
GRLine( m_canvas->GetClipBox(), DC, pos.x, pos.y,
xg * scale, yg * scale, width, Color );
break;
}
}
}
else
{
for( WsItem = &WS_CADRE_D; WsItem != NULL; WsItem = WsItem->Pnext )
{
pos.x = ( refx - WsItem->m_Posx ) * scale;
pos.y = ( refy - WsItem->m_Posy ) * scale;
msg.Empty();
switch( WsItem->m_Type )
{
case WS_CADRE:
// Begin list number > 1
msg = GetTitleBlock().GetComment1();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size3,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
width,
false, false );
pos.x = (pageInfo.GetLeftMarginMils() + 1260) * scale;
pos.y = (pageInfo.GetTopMarginMils() + 270) * scale;
DrawGraphicText( m_canvas, DC, pos, Color,
msg, 1800, size2,
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
width,
false, false );
}
break;
case WS_PODPIS_D:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width,
false, false );
break;
case WS_IDENTSHEET_D:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg << screen->m_ScreenNumber;
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
break;
case WS_LEFT_SEGMENT_D:
pos.y = ( refy - WsItem->m_Posy ) * scale;
case WS_SEGMENT_D:
xg = pageSize.x -
pageInfo.GetRightMarginMils() - WsItem->m_Endx;
yg = pageSize.y -
pageInfo.GetBottomMarginMils() - WsItem->m_Endy;
GRLine( m_canvas->GetClipBox(), DC, pos.x, pos.y,
xg * scale, yg * scale, width, Color );
break;
}
}
}
#else
refx = pageSize.x - pageInfo.GetRightMarginMils() - GRID_REF_W;
refy = pageSize.y - pageInfo.GetBottomMarginMils() - GRID_REF_W;
for( WsItem = &WS_Date; WsItem != NULL; WsItem = WsItem->Pnext )
{
pos.x = (refx - WsItem->m_Posx) * scale;
pos.y = (refy - WsItem->m_Posy) * scale;
msg.Empty();
switch( WsItem->m_Type )
{
case WS_DATE:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg += GetTitleBlock().GetDate();
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, true );
break;
case WS_REV:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg += GetTitleBlock().GetRevision();
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
GetPenSizeForBold( MIN( size.x, size.y ) ),
false, true );
break;
case WS_KICAD_VERSION:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg += g_ProductName + wxGetApp().GetAppName();
msg += wxT( " " ) + GetBuildVersion();
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
break;
case WS_SIZESHEET:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg += pageInfo.GetType();
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
break;
case WS_IDENTSHEET:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg << screen->m_ScreenNumber << wxT( "/" ) << screen->m_NumberOfScreen;
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
break;
case WS_FILENAME:
{
wxString fname, fext;
wxFileName::SplitPath( screen->GetFileName(), (wxString*) NULL, &fname, &fext );
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg << fname << wxT( "." ) << fext;
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
}
break;
case WS_FULLSHEETNAME:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg += GetScreenDesc();
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
break;
case WS_COMPANY_NAME:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg += GetTitleBlock().GetCompany();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
GetPenSizeForBold( MIN( size.x, size.y ) ),
false, true );
UpperLimit = MAX( UpperLimit, WsItem->m_Posy + SIZETEXT );
}
break;
case WS_TITLE:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg += GetTitleBlock().GetTitle();
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
GetPenSizeForBold( MIN( size.x, size.y ) ),
false, true );
break;
case WS_COMMENT1:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg += GetTitleBlock().GetComment1();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
UpperLimit = MAX( UpperLimit, WsItem->m_Posy + SIZETEXT );
}
break;
case WS_COMMENT2:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg += GetTitleBlock().GetComment2();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
UpperLimit = MAX( UpperLimit, WsItem->m_Posy + SIZETEXT );
}
break;
case WS_COMMENT3:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg += GetTitleBlock().GetComment3();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
UpperLimit = MAX( UpperLimit, WsItem->m_Posy + SIZETEXT );
}
break;
case WS_COMMENT4:
if( WsItem->m_Legende )
msg = WsItem->m_Legende;
msg += GetTitleBlock().GetComment4();
if( !msg.IsEmpty() )
{
DrawGraphicText( m_canvas, DC, pos, Color,
msg, TEXT_ORIENT_HORIZ, size,
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
width, false, false );
UpperLimit = MAX( UpperLimit, WsItem->m_Posy + SIZETEXT );
}
break;
case WS_UPPER_SEGMENT:
if( UpperLimit == 0 )
break;
case WS_LEFT_SEGMENT:
WS_MostUpperLine.m_Posy =
WS_MostUpperLine.m_Endy =
WS_MostLeftLine.m_Posy = UpperLimit;
pos.y = (refy - WsItem->m_Posy) * scale;
case WS_SEGMENT:
xg = pageSize.x -
GRID_REF_W - pageInfo.GetRightMarginMils() - WsItem->m_Endx;
yg = pageSize.y -
GRID_REF_W - pageInfo.GetBottomMarginMils() - WsItem->m_Endy;
GRLine( m_canvas->GetClipBox(), DC, pos.x, pos.y,
xg * scale, yg * scale, width, Color );
break;
}
}
#endif
}
void WS_DRAW_ITEM_LIST::BuildWorkSheetGraphicList(
const PAGE_INFO& aPageInfo,
const TITLE_BLOCK& aTitleBlock,
COLOR4D aColor, COLOR4D aAltColor )
{
WORKSHEET_LAYOUT& pglayout = WORKSHEET_LAYOUT::GetTheInstance();
#define milsTomm (25.4/1000)
m_titleBlock = &aTitleBlock;
m_paperFormat = &aPageInfo.GetType();
wxPoint LTmargin( Mm2mils( pglayout.GetLeftMargin() ),
Mm2mils( pglayout.GetTopMargin() ) );
wxPoint RBmargin( Mm2mils( pglayout.GetRightMargin() ),
Mm2mils( pglayout.GetBottomMargin() ) );
SetMargins( LTmargin, RBmargin );
SetPageSize( aPageInfo.GetSizeMils() );
// Build the basic layout shape, if the layout list is empty
if( pglayout.GetCount() == 0 && !pglayout.VoidListAllowed() )
pglayout.SetPageLayout();
WORKSHEET_DATAITEM::m_WSunits2Iu = m_milsToIu / milsTomm;
WORKSHEET_DATAITEM::m_Color = aColor; // the default color to draw items
WORKSHEET_DATAITEM::m_AltColor = aAltColor; // an alternate color to draw items
// Left top corner position
DPOINT lt_corner;
lt_corner.x = pglayout.GetLeftMargin();
lt_corner.y = pglayout.GetTopMargin();
WORKSHEET_DATAITEM::m_LT_Corner = lt_corner;
// Right bottom corner position
DPOINT rb_corner;
rb_corner.x = (m_pageSize.x*milsTomm) - pglayout.GetRightMargin();
rb_corner.y = (m_pageSize.y*milsTomm) - pglayout.GetBottomMargin();
WORKSHEET_DATAITEM::m_RB_Corner = rb_corner;
WS_DRAW_ITEM_TEXT* gtext;
int pensize;
for( unsigned ii = 0; ; ii++ )
{
WORKSHEET_DATAITEM* wsItem = pglayout.GetItem( ii );
if( wsItem == NULL )
break;
// Generate it only if the page option allows this
if( wsItem->GetPage1Option() < 0 // Not on page 1
&& m_sheetNumber <= 1 )
continue;
if( wsItem->GetPage1Option() > 0 // Only on page 1
&& m_sheetNumber > 1 )
continue;
COLOR4D color = wsItem->GetItemColor();
pensize = wsItem->GetPenSizeUi();
switch( wsItem->GetType() )
{
case WORKSHEET_DATAITEM::WS_TEXT:
{
WORKSHEET_DATAITEM_TEXT * wsText = (WORKSHEET_DATAITEM_TEXT*)wsItem;
bool multilines = false;
if( wsText->m_SpecialMode )
wsText->m_FullText = wsText->m_TextBase;
else
{
wsText->m_FullText = BuildFullText( wsText->m_TextBase );
multilines = wsText->ReplaceAntiSlashSequence();
}
if( wsText->m_FullText.IsEmpty() )
break;
if( pensize == 0 )
pensize = m_penSize;
wsText->SetConstrainedTextSize();
wxSize textsize;
textsize.x = KiROUND( wsText->m_ConstrainedTextSize.x
* WORKSHEET_DATAITEM::m_WSunits2Iu );
textsize.y = KiROUND( wsText->m_ConstrainedTextSize.y
* WORKSHEET_DATAITEM::m_WSunits2Iu );
if( wsText->IsBold())
pensize = GetPenSizeForBold( std::min( textsize.x, textsize.y ) );
for( int jj = 0; jj < wsText->m_RepeatCount; jj++)
{
if( jj && ! wsText->IsInsidePage( jj ) )
continue;
gtext = new WS_DRAW_ITEM_TEXT( wsText, wsText->m_FullText,
wsText->GetStartPosUi( jj ),
textsize, pensize, color,
wsText->IsItalic(),
wsText->IsBold() );
Append( gtext );
gtext->SetMultilineAllowed( multilines );
wsText->TransfertSetupToGraphicText( gtext );
// Increment label for the next text
// (has no meaning for multiline texts)
if( wsText->m_RepeatCount > 1 && !multilines )
wsText->IncrementLabel( (jj+1)*wsText->m_IncrementLabel);
}
}
break;
case WORKSHEET_DATAITEM::WS_SEGMENT:
if( pensize == 0 )
pensize = m_penSize;
for( int jj = 0; jj < wsItem->m_RepeatCount; jj++ )
{
if( jj && ! wsItem->IsInsidePage( jj ) )
continue;
Append( new WS_DRAW_ITEM_LINE( wsItem, wsItem->GetStartPosUi( jj ),
wsItem->GetEndPosUi( jj ),
pensize, color ) );
}
break;
case WORKSHEET_DATAITEM::WS_RECT:
if( pensize == 0 )
pensize = m_penSize;
for( int jj = 0; jj < wsItem->m_RepeatCount; jj++ )
{
if( jj && ! wsItem->IsInsidePage( jj ) )
break;
Append( new WS_DRAW_ITEM_RECT( wsItem, wsItem->GetStartPosUi( jj ),
wsItem->GetEndPosUi( jj ),
pensize, color ) );
}
break;
case WORKSHEET_DATAITEM::WS_POLYPOLYGON:
{
WORKSHEET_DATAITEM_POLYPOLYGON * wspoly =
(WORKSHEET_DATAITEM_POLYPOLYGON*) wsItem;
for( int jj = 0; jj < wsItem->m_RepeatCount; jj++ )
{
if( jj && ! wsItem->IsInsidePage( jj ) )
continue;
for( int kk = 0; kk < wspoly->GetPolyCount(); kk++ )
{
const bool fill = true;
WS_DRAW_ITEM_POLYGON* poly = new WS_DRAW_ITEM_POLYGON( wspoly,
wspoly->GetStartPosUi( jj ),
fill, pensize, color );
Append( poly );
// Create polygon outline
unsigned ist = wspoly->GetPolyIndexStart( kk );
unsigned iend = wspoly->GetPolyIndexEnd( kk );
while( ist <= iend )
poly->m_Corners.push_back(
wspoly->GetCornerPositionUi( ist++, jj ) );
}
}
}
break;
case WORKSHEET_DATAITEM::WS_BITMAP:
((WORKSHEET_DATAITEM_BITMAP*)wsItem)->SetPixelScaleFactor();
for( int jj = 0; jj < wsItem->m_RepeatCount; jj++ )
{
if( jj && ! wsItem->IsInsidePage( jj ) )
continue;
Append( new WS_DRAW_ITEM_BITMAP( wsItem,
wsItem->GetStartPosUi( jj ) ) );
}
break;
}
}
}
bool SCH_TEXT::Load( LINE_READER& aLine, wxString& aErrorMsg )
{
char Name1[256];
char Name2[256];
char Name3[256];
int thickness = 0, size = 0, orient = 0;
Name1[0] = 0; Name2[0] = 0; Name3[0] = 0;
char* sline = (char*) aLine;
while( ( *sline != ' ' ) && *sline )
sline++;
// sline points the start of parameters
int ii = sscanf( sline, "%255s %d %d %d %d %255s %255s %d", Name1, &m_Pos.x, &m_Pos.y,
&orient, &size, Name2, Name3, &thickness );
if( ii < 4 )
{
aErrorMsg.Printf( wxT( "Eeschema file text load error at line %d" ),
aLine.LineNumber() );
return false;
}
if( !aLine.ReadLine() )
{
aErrorMsg.Printf( wxT( "Eeschema file text load error at line %d" ),
aLine.LineNumber() );
return false;
}
if( size == 0 )
size = GetDefaultTextSize();
char* text = strtok( (char*) aLine, "\n\r" );
if( text == NULL )
{
aErrorMsg.Printf( wxT( "Eeschema file text load error at line %d" ),
aLine.LineNumber() );
return false;
}
wxString val = FROM_UTF8( text );
for( ; ; )
{
int i = val.find( wxT( "\\n" ) );
if( i == wxNOT_FOUND )
break;
val.erase( i, 2 );
val.insert( i, wxT( "\n" ) );
}
m_Text = val;
m_Size.x = m_Size.y = size;
SetOrientation( orient );
if( isdigit( Name3[0] ) )
{
thickness = atol( Name3 );
m_Bold = ( thickness != 0 );
m_Thickness = m_Bold ? GetPenSizeForBold( size ) : 0;
}
if( strnicmp( Name2, "Italic", 6 ) == 0 )
m_Italic = 1;
return true;
}
bool SCH_HIERLABEL::Load( LINE_READER& aLine, wxString& aErrorMsg )
{
char Name1[256];
char Name2[256];
char Name3[256];
int thickness = 0, size = 0, orient = 0;
Name1[0] = 0; Name2[0] = 0; Name3[0] = 0;
char* sline = (char*) aLine;
while( (*sline != ' ' ) && *sline )
sline++;
// sline points the start of parameters
int ii = sscanf( sline, "%255s %d %d %d %d %255s %255s %d", Name1, &m_Pos.x, &m_Pos.y,
&orient, &size, Name2, Name3, &thickness );
if( ii < 4 )
{
aErrorMsg.Printf( wxT( "Eeschema file hierarchical label load error at line %d" ),
aLine.LineNumber() );
return false;
}
if( !aLine.ReadLine() )
{
aErrorMsg.Printf( wxT( "Eeschema file hierarchical label load error at line %d" ),
aLine.LineNumber() );
return false;
}
if( size == 0 )
size = GetDefaultTextSize();
char* text = strtok( (char*) aLine, "\n\r" );
if( text == NULL )
{
aErrorMsg.Printf( wxT( "Eeschema file hierarchical label load error at line %d" ),
aLine.LineNumber() );
return false;
}
m_Text = FROM_UTF8( text );
m_Size.x = m_Size.y = size;
SetOrientation( orient );
m_shape = NET_INPUT;
m_Bold = ( thickness != 0 );
m_Thickness = m_Bold ? GetPenSizeForBold( size ) : 0;
if( stricmp( Name2, SheetLabelType[NET_OUTPUT] ) == 0 )
m_shape = NET_OUTPUT;
if( stricmp( Name2, SheetLabelType[NET_BIDI] ) == 0 )
m_shape = NET_BIDI;
if( stricmp( Name2, SheetLabelType[NET_TRISTATE] ) == 0 )
m_shape = NET_TRISTATE;
if( stricmp( Name2, SheetLabelType[NET_UNSPECIFIED] ) == 0 )
m_shape = NET_UNSPECIFIED;
if( stricmp( Name3, "Italic" ) == 0 )
m_Italic = 1;
return true;
}
