/**
* @brief USBH_LL_Init
* Initialize the Low Level portion of the Host driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_Init(USBH_HandleTypeDef *phost)
{
if(phost->id == 0)
{
/* Set the LL Driver parameters */
hhcd_FS.Instance = USB_OTG_FS;
hhcd_FS.Init.Host_channels = 11;
hhcd_FS.Init.dma_enable = 0;
hhcd_FS.Init.low_power_enable = 0;
hhcd_FS.Init.phy_itface = HCD_PHY_EMBEDDED;
hhcd_FS.Init.Sof_enable = 0;
hhcd_FS.Init.speed = HCD_SPEED_FULL;
hhcd_FS.Init.vbus_sensing_enable = 0;
hhcd_FS.Init.lpm_enable = 0;
/* Link the driver to the stack */
hhcd_FS.pData = phost;
phost->pData = &hhcd_FS;
/* Initialize the LL Driver */
HAL_HCD_Init(&hhcd_FS);
}
else /*phost->id == 1*/
{
/* Set the LL driver parameters */
hhcd_HS.Instance = USB_OTG_HS;
hhcd_HS.Init.Host_channels = 11;
hhcd_HS.Init.dma_enable = 1;
hhcd_HS.Init.low_power_enable = 0;
#ifdef USE_USB_HS_IN_FS
hhcd_HS.Init.phy_itface = HCD_PHY_EMBEDDED;
#else
hhcd_HS.Init.phy_itface = HCD_PHY_ULPI;
#endif
hhcd_HS.Init.Sof_enable = 0;
hhcd_HS.Init.speed = HCD_SPEED_HIGH;
hhcd_HS.Init.vbus_sensing_enable = 0;
hhcd_HS.Init.use_external_vbus = 1;
hhcd_HS.Init.lpm_enable = 0;
/* Link the driver to the stack */
hhcd_HS.pData = phost;
phost->pData = &hhcd_HS;
/* Initialize the LL driver */
HAL_HCD_Init(&hhcd_HS);
}
USBH_LL_SetTimer (phost, HAL_HCD_GetCurrentFrame(&hhcd_HS));
USBH_LL_SetTimer (phost, HAL_HCD_GetCurrentFrame(&hhcd_FS));
return USBH_OK;
}
/**
* @brief Initializes the Low Level portion of the Host driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_Init(USBH_HandleTypeDef *phost)
{
#ifdef USE_USB_FS
/* Set the LL Driver parameters */
hhcd.Instance = USB_OTG_FS;
hhcd.Init.Host_channels = 11;
hhcd.Init.dma_enable = 0;
hhcd.Init.low_power_enable = 0;
hhcd.Init.phy_itface = HCD_PHY_EMBEDDED;
hhcd.Init.Sof_enable = 0;
hhcd.Init.speed = HCD_SPEED_FULL;
hhcd.Init.vbus_sensing_enable = 0;
hhcd.Init.lpm_enable = 0;
/* Link the driver to the stack */
hhcd.pData = phost;
phost->pData = &hhcd;
/* Initialize the LL Driver */
HAL_HCD_Init(&hhcd);
#endif
USBH_LL_SetTimer (phost, HAL_HCD_GetCurrentFrame(&hhcd));
return USBH_OK;
}
/**
* @brief Initializes the Low Level portion of the Host driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_Init(USBH_HandleTypeDef *phost)
{
/*Set LL Driver parameters */
hhcd.Instance = USB_OTG_HS;
hhcd.Init.Host_channels = 11;
hhcd.Init.dma_enable = 1;
hhcd.Init.low_power_enable = 0;
hhcd.Init.phy_itface = HCD_PHY_EMBEDDED;
hhcd.Init.Sof_enable = 0;
hhcd.Init.speed = HCD_SPEED_HIGH;
hhcd.Init.vbus_sensing_enable = 0;
hhcd.Init.use_external_vbus = 1;
/* Link The driver to the stack */
hhcd.pData = phost;
phost->pData = &hhcd;
/*Initialize LL Driver */
if (HAL_HCD_Init(&hhcd) != HAL_OK)
{
return USBH_FAIL;
}
USBH_LL_SetTimer (phost, HAL_HCD_GetCurrentFrame(&hhcd));
return USBH_OK;
}
/**
* @brief USBH_LL_Init
* Initialize the Low Level portion of the Host driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_Init(USBH_HandleTypeDef *phost) {
/* Change Systick prioity */
//HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
RCC->AHB1ENR |= RCC_AHB1ENR_OTGHSEN;
RCC->AHB1LPENR |= RCC_AHB1LPENR_OTGHSLPEN;
/*Set LL Driver parameters */
hHCD.Instance = USB_OTG_HS;
hHCD.Init.Host_channels = 11;
hHCD.Init.dma_enable = 0;
hHCD.Init.low_power_enable = 0;
hHCD.Init.phy_itface = HCD_PHY_EMBEDDED;
hHCD.Init.Sof_enable = 0;
hHCD.Init.speed = HCD_SPEED_FULL;
hHCD.Init.vbus_sensing_enable = 0;
/* Link The driver to the stack */
hHCD.pData = phost;
phost->pData = &hHCD;
/*Initialize LL Driver */
HAL_HCD_Init(&hHCD);
// USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD;
USBH_LL_SetTimer(phost, HAL_HCD_GetCurrentFrame(&hHCD));
return USBH_OK;
}
/**
* @brief USBH_LL_Init
* Initialize the Low Level portion of the Host driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_Init (USBH_HandleTypeDef *phost)
{
/* Init USB_IP */
if (phost->id == HOST_HS) {
/* Link The driver to the stack */
hhcd_USB_OTG_HS.pData = phost;
phost->pData = &hhcd_USB_OTG_HS;
hhcd_USB_OTG_HS.Instance = USB_OTG_HS;
hhcd_USB_OTG_HS.Init.dev_endpoints = 6;
hhcd_USB_OTG_HS.Init.Host_channels = 12;
hhcd_USB_OTG_HS.Init.speed = HCD_SPEED_FULL;
hhcd_USB_OTG_HS.Init.dma_enable = DISABLE;
hhcd_USB_OTG_HS.Init.phy_itface = USB_OTG_EMBEDDED_PHY;
hhcd_USB_OTG_HS.Init.Sof_enable = DISABLE;
hhcd_USB_OTG_HS.Init.low_power_enable = DISABLE;
hhcd_USB_OTG_HS.Init.vbus_sensing_enable = DISABLE;
hhcd_USB_OTG_HS.Init.use_external_vbus = DISABLE;
if (HAL_HCD_Init(&hhcd_USB_OTG_HS) != HAL_OK)
{
Error_Handler();
}
USBH_LL_SetTimer (phost, HAL_HCD_GetCurrentFrame(&hhcd_USB_OTG_HS));
}
return USBH_OK;
}
/**
* @brief Initializes the Low Level portion of the Host driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_Init(USBH_HandleTypeDef *phost)
{
#ifdef USE_USB_FS
/* Set the LL driver parameters */
hhcd.Instance = USB_OTG_FS;
hhcd.Init.Host_channels = 11;
hhcd.Init.dma_enable = 0;
hhcd.Init.low_power_enable = 0;
hhcd.Init.phy_itface = HCD_PHY_EMBEDDED;
hhcd.Init.Sof_enable = 0;
/* Link the driver to the stack */
hhcd.pData = phost;
phost->pData = &hhcd;
/* Initialize the LL Driver */
HAL_HCD_Init(&hhcd);
#endif
#ifdef USE_USB_HS
/* Set the LL driver parameters */
hhcd.Instance = USB_OTG_HS;
hhcd.Init.Host_channels = 11;
hhcd.Init.dma_enable = 0;
hhcd.Init.low_power_enable = 0;
#ifdef USE_USB_HS_IN_FS
hhcd.Init.phy_itface = HCD_PHY_EMBEDDED;
#else
hhcd.Init.phy_itface = HCD_PHY_ULPI;
#endif
hhcd.Init.Sof_enable = 0;
hhcd.Init.speed = HCD_SPEED_HIGH;
hhcd.Init.use_external_vbus = 1;
/* Link the driver to the stack */
hhcd.pData = phost;
phost->pData = &hhcd;
/* Initialize the LL driver */
HAL_HCD_Init(&hhcd);
#endif /*USE_USB_HS*/
USBH_LL_SetTimer(phost, HAL_HCD_GetCurrentFrame(&hhcd));
return USBH_OK;
}
/**
* @brief Initializes the Low Level portion of the Host driver.
* @param phost: Host handle
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_LL_Init(USBH_HandleTypeDef *phost)
{
/* Set the LL driver parameters */
handleHCD.Instance = USB_OTG_FS;
handleHCD.Init.speed = HCD_SPEED_FULL;
handleHCD.Init.Host_channels = 11;
handleHCD.Init.dma_enable = 0;
handleHCD.Init.low_power_enable = 0;
handleHCD.Init.phy_itface = HCD_PHY_EMBEDDED;
handleHCD.Init.Sof_enable = 0;
handleHCD.Init.vbus_sensing_enable = 0;
handleHCD.Init.use_external_vbus = 0;
/* Link the driver to the stack */
handleHCD.pData = phost;
phost->pData = &handleHCD;
/* Initialize the LL driver */
HAL_HCD_Init(&handleHCD);
USBH_LL_SetTimer(phost, HAL_HCD_GetCurrentFrame(&handleHCD));
return USBH_OK;
}
