// Function to configure IOMUXC for i2c1 module.
void i2c1_iomux_config(void)
{
// Config i2c1.I2C1_SCL to pad EIM_DATA21(H20)
// HW_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA21_WR(0x00000016);
// HW_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_WR(0x0001F8B0);
// HW_IOMUXC_I2C1_SCL_IN_SELECT_INPUT_WR(0x00000000);
// Mux Register:
// IOMUXC_SW_MUX_CTL_PAD_EIM_DATA21(0x020E00A4)
// SION [4] - Software Input On Field Reset: DISABLED
// Force the selected mux mode Input path no matter of MUX_MODE functionality.
// DISABLED (0) - Input Path is determined by functionality of the selected mux mode (regular).
// ENABLED (1) - Force input path of pad.
// MUX_MODE [2:0] - MUX Mode Select Field Reset: ALT5
// Select iomux modes to be used for pad.
// ALT0 (0) - Select instance: eim signal: EIM_DATA21
// ALT1 (1) - Select instance: ecspi4 signal: ECSPI4_SCLK
// ALT2 (2) - Select instance: ipu1 signal: IPU1_DI0_PIN17
// ALT3 (3) - Select instance: ipu2 signal: IPU2_CSI1_DATA11
// ALT4 (4) - Select instance: usb signal: USB_OTG_OC
// ALT5 (5) - Select instance: gpio3 signal: GPIO3_IO21
// ALT6 (6) - Select instance: i2c1 signal: I2C1_SCL
// ALT7 (7) - Select instance: spdif signal: SPDIF_IN
HW_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA21_WR(
BF_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA21_SION_V(ENABLED) |
BF_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA21_MUX_MODE_V(ALT6));
// Pad Control Register:
// IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21(0x020E03B8)
// HYS [16] - Hysteresis Enable Field Reset: ENABLED
// DISABLED (0) - CMOS input
// ENABLED (1) - Schmitt trigger input
// PUS [15:14] - Pull Up / Down Config. Field Reset: 100K_OHM_PU
// 100K_OHM_PD (0) - 100K Ohm Pull Down
// 47K_OHM_PU (1) - 47K Ohm Pull Up
// 100K_OHM_PU (2) - 100K Ohm Pull Up
// 22K_OHM_PU (3) - 22K Ohm Pull Up
// PUE [13] - Pull / Keep Select Field Reset: PULL
// KEEP (0) - Keeper Enabled
// PULL (1) - Pull Enabled
// PKE [12] - Pull / Keep Enable Field Reset: ENABLED
// DISABLED (0) - Pull/Keeper Disabled
// ENABLED (1) - Pull/Keeper Enabled
// ODE [11] - Open Drain Enable Field Reset: DISABLED
// Enables open drain of the pin.
// DISABLED (0) - Output is CMOS.
// ENABLED (1) - Output is Open Drain.
// SPEED [7:6] - Speed Field Reset: 100MHZ
// TBD (0) - TBD
// 50MHZ (1) - Low (50 MHz)
// 100MHZ (2) - Medium (100 MHz)
// 200MHZ (3) - Maximum (200 MHz)
// DSE [5:3] - Drive Strength Field Reset: 40_OHM
// HIZ (0) - HI-Z
// 240_OHM (1) - 240 Ohm
// 120_OHM (2) - 120 Ohm
// 80_OHM (3) - 80 Ohm
// 60_OHM (4) - 60 Ohm
// 48_OHM (5) - 48 Ohm
// 40_OHM (6) - 40 Ohm
// 34_OHM (7) - 34 Ohm
// SRE [0] - Slew Rate Field Reset: SLOW
// Slew rate control.
// SLOW (0) - Slow Slew Rate
// FAST (1) - Fast Slew Rate
HW_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_WR(
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_HYS_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_PUS_V(22K_OHM_PU) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_PUE_V(PULL) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_PKE_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_ODE_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_SPEED_V(100MHZ) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_DSE_V(40_OHM) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_SRE_V(SLOW));
// Pad EIM_DATA21 is involved in Daisy Chain.
// Input Select Register:
// IOMUXC_I2C1_SCL_IN_SELECT_INPUT(0x020E0898)
// DAISY [0] - MUX Mode Select Field Reset: EIM_DATA21_ALT6
// Selecting Pads Involved in Daisy Chain.
// EIM_DATA21_ALT6 (0) - Select signal i2c1 I2C1_SCL as input from pad EIM_DATA21(ALT6).
// CSI0_DATA09_ALT4 (1) - Select signal i2c1 I2C1_SCL as input from pad CSI0_DATA09(ALT4).
HW_IOMUXC_I2C1_SCL_IN_SELECT_INPUT_WR(
BF_IOMUXC_I2C1_SCL_IN_SELECT_INPUT_DAISY_V(EIM_DATA21_ALT6));
// Config i2c1.I2C1_SDA to pad EIM_DATA28(G23)
// HW_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA28_WR(0x00000011);
// HW_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA28_WR(0x0001F8B0);
// HW_IOMUXC_I2C1_SDA_IN_SELECT_INPUT_WR(0x00000000);
// Mux Register:
// IOMUXC_SW_MUX_CTL_PAD_EIM_DATA28(0x020E00C4)
// SION [4] - Software Input On Field Reset: DISABLED
// Force the selected mux mode Input path no matter of MUX_MODE functionality.
// DISABLED (0) - Input Path is determined by functionality of the selected mux mode (regular).
// ENABLED (1) - Force input path of pad.
// MUX_MODE [2:0] - MUX Mode Select Field Reset: ALT5
// Select iomux modes to be used for pad.
// ALT0 (0) - Select instance: eim signal: EIM_DATA28
// ALT1 (1) - Select instance: i2c1 signal: I2C1_SDA
// ALT2 (2) - Select instance: ecspi4 signal: ECSPI4_MOSI
// ALT3 (3) - Select instance: ipu2 signal: IPU2_CSI1_DATA12
// ALT4 (4) - Select instance: uart2 signal: UART2_CTS_B
// ALT5 (5) - Select instance: gpio3 signal: GPIO3_IO28
// ALT6 (6) - Select instance: ipu1 signal: IPU1_EXT_TRIG
// ALT7 (7) - Select instance: ipu1 signal: IPU1_DI0_PIN13
HW_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA28_WR(
BF_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA28_SION_V(ENABLED) |
BF_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA28_MUX_MODE_V(ALT1));
// Pad Control Register:
// IOMUXC_SW_PAD_CTL_PAD_EIM_DATA28(0x020E03D8)
// HYS [16] - Hysteresis Enable Field Reset: ENABLED
// DISABLED (0) - CMOS input
// ENABLED (1) - Schmitt trigger input
// PUS [15:14] - Pull Up / Down Config. Field Reset: 100K_OHM_PU
// 100K_OHM_PD (0) - 100K Ohm Pull Down
// 47K_OHM_PU (1) - 47K Ohm Pull Up
// 100K_OHM_PU (2) - 100K Ohm Pull Up
// 22K_OHM_PU (3) - 22K Ohm Pull Up
// PUE [13] - Pull / Keep Select Field Reset: PULL
// KEEP (0) - Keeper Enabled
// PULL (1) - Pull Enabled
// PKE [12] - Pull / Keep Enable Field Reset: ENABLED
// DISABLED (0) - Pull/Keeper Disabled
// ENABLED (1) - Pull/Keeper Enabled
// ODE [11] - Open Drain Enable Field Reset: DISABLED
// Enables open drain of the pin.
// DISABLED (0) - Output is CMOS.
// ENABLED (1) - Output is Open Drain.
// SPEED [7:6] - Speed Field Reset: 100MHZ
// TBD (0) - TBD
// 50MHZ (1) - Low (50 MHz)
// 100MHZ (2) - Medium (100 MHz)
// 200MHZ (3) - Maximum (200 MHz)
// DSE [5:3] - Drive Strength Field Reset: 40_OHM
// HIZ (0) - HI-Z
// 240_OHM (1) - 240 Ohm
// 120_OHM (2) - 120 Ohm
// 80_OHM (3) - 80 Ohm
// 60_OHM (4) - 60 Ohm
// 48_OHM (5) - 48 Ohm
// 40_OHM (6) - 40 Ohm
// 34_OHM (7) - 34 Ohm
// SRE [0] - Slew Rate Field Reset: SLOW
// Slew rate control.
// SLOW (0) - Slow Slew Rate
// FAST (1) - Fast Slew Rate
HW_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA28_WR(
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA28_HYS_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA28_PUS_V(22K_OHM_PU) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA28_PUE_V(PULL) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA28_PKE_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA28_ODE_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA28_SPEED_V(100MHZ) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA28_DSE_V(40_OHM) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA28_SRE_V(SLOW));
// Pad EIM_DATA28 is involved in Daisy Chain.
// Input Select Register:
// IOMUXC_I2C1_SDA_IN_SELECT_INPUT(0x020E089C)
// DAISY [0] - MUX Mode Select Field Reset: EIM_DATA28_ALT1
// Selecting Pads Involved in Daisy Chain.
// EIM_DATA28_ALT1 (0) - Select signal i2c1 I2C1_SDA as input from pad EIM_DATA28(ALT1).
// CSI0_DATA08_ALT4 (1) - Select signal i2c1 I2C1_SDA as input from pad CSI0_DATA08(ALT4).
HW_IOMUXC_I2C1_SDA_IN_SELECT_INPUT_WR(
BF_IOMUXC_I2C1_SDA_IN_SELECT_INPUT_DAISY_V(EIM_DATA28_ALT1));
}
// Function to configure IOMUXC for usb module.
void usb_iomux_config(void)
{
// Config usb.USB_OTG_ID to pad GPIO01(T4)
// HW_IOMUXC_SW_MUX_CTL_PAD_GPIO01_WR(0x00000003);
// HW_IOMUXC_SW_PAD_CTL_PAD_GPIO01_WR(0x0001B0B0);
// HW_IOMUXC_ANALOG_USB_OTG_ID_SELECT_INPUT_WR(0x00000000);
// Mux Register:
// IOMUXC_SW_MUX_CTL_PAD_GPIO01(0x020E0210)
// SION [4] - Software Input On Field Reset: DISABLED
// Force the selected mux mode Input path no matter of MUX_MODE functionality.
// DISABLED (0) - Input Path is determined by functionality of the selected mux mode (regular).
// ENABLED (1) - Force input path of pad.
// MUX_MODE [2:0] - MUX Mode Select Field Reset: ALT5
// Select iomux modes to be used for pad.
// ALT0 (0) - Select instance: esai signal: ESAI_RX_CLK
// ALT1 (1) - Select instance: wdog2 signal: WDOG2_B
// ALT2 (2) - Select instance: kpp signal: KEY_ROW5
// ALT3 (3) - Select instance: usb signal: USB_OTG_ID
// ALT4 (4) - Select instance: pwm2 signal: PWM2_OUT
// ALT5 (5) - Select instance: gpio1 signal: GPIO1_IO01
// ALT6 (6) - Select instance: usdhc1 signal: SD1_CD_B
HW_IOMUXC_SW_MUX_CTL_PAD_GPIO01_WR(
BF_IOMUXC_SW_MUX_CTL_PAD_GPIO01_SION_V(DISABLED) |
BF_IOMUXC_SW_MUX_CTL_PAD_GPIO01_MUX_MODE_V(ALT3));
// Pad Control Register:
// IOMUXC_SW_PAD_CTL_PAD_GPIO01(0x020E05E0)
// HYS [16] - Hysteresis Enable Field Reset: ENABLED
// DISABLED (0) - CMOS input
// ENABLED (1) - Schmitt trigger input
// PUS [15:14] - Pull Up / Down Config. Field Reset: 100K_OHM_PU
// 100K_OHM_PD (0) - 100K Ohm Pull Down
// 47K_OHM_PU (1) - 47K Ohm Pull Up
// 100K_OHM_PU (2) - 100K Ohm Pull Up
// 22K_OHM_PU (3) - 22K Ohm Pull Up
// PUE [13] - Pull / Keep Select Field Reset: PULL
// KEEP (0) - Keeper Enabled
// PULL (1) - Pull Enabled
// PKE [12] - Pull / Keep Enable Field Reset: ENABLED
// DISABLED (0) - Pull/Keeper Disabled
// ENABLED (1) - Pull/Keeper Enabled
// ODE [11] - Open Drain Enable Field Reset: DISABLED
// Enables open drain of the pin.
// DISABLED (0) - Output is CMOS.
// ENABLED (1) - Output is Open Drain.
// SPEED [7:6] - Speed Field Reset: 100MHZ
// RESERVED0 (0) - Reserved
// 50MHZ (1) - Low (50 MHz)
// 100MHZ (2) - Medium (100 MHz)
// 200MHZ (3) - Maximum (200 MHz)
// DSE [5:3] - Drive Strength Field Reset: 40_OHM
// HIZ (0) - HI-Z
// 240_OHM (1) - 240 Ohm
// 120_OHM (2) - 120 Ohm
// 80_OHM (3) - 80 Ohm
// 60_OHM (4) - 60 Ohm
// 48_OHM (5) - 48 Ohm
// 40_OHM (6) - 40 Ohm
// 34_OHM (7) - 34 Ohm
// SRE [0] - Slew Rate Field Reset: SLOW
// Slew rate control.
// SLOW (0) - Slow Slew Rate
// FAST (1) - Fast Slew Rate
HW_IOMUXC_SW_PAD_CTL_PAD_GPIO01_WR(
BF_IOMUXC_SW_PAD_CTL_PAD_GPIO01_HYS_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_GPIO01_PUS_V(100K_OHM_PU) |
BF_IOMUXC_SW_PAD_CTL_PAD_GPIO01_PUE_V(PULL) |
BF_IOMUXC_SW_PAD_CTL_PAD_GPIO01_PKE_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_GPIO01_ODE_V(DISABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_GPIO01_SPEED_V(100MHZ) |
BF_IOMUXC_SW_PAD_CTL_PAD_GPIO01_DSE_V(40_OHM) |
BF_IOMUXC_SW_PAD_CTL_PAD_GPIO01_SRE_V(SLOW));
// Pad GPIO01 is involved in Daisy Chain.
// Input Select Register:
// IOMUXC_ANALOG_USB_OTG_ID_SELECT_INPUT(0x020E0790)
// DAISY [0] - MUX Mode Select Field Reset: ENET_RX_ER_ALT0
// Selecting Pads Involved in Daisy Chain.
// ENET_RX_ER_ALT0 (0) - Select signal usb USB_OTG_ID as input from pad ENET_RX_ER(ALT0).
// GPIO01_ALT3 (1) - Select signal usb USB_OTG_ID as input from pad GPIO01(ALT3).
HW_IOMUXC_ANALOG_USB_OTG_ID_SELECT_INPUT_WR(
BF_IOMUXC_ANALOG_USB_OTG_ID_SELECT_INPUT_DAISY_V(ENET_RX_ER_ALT0));
// Config usb.USB_OTG_OC to pad EIM_DATA21(H20)
// HW_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA21_WR(0x00000004);
// HW_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_WR(0x0001B0B0);
// HW_IOMUXC_USB_OTG_OC_SELECT_INPUT_WR(0x00000000);
// Mux Register:
// IOMUXC_SW_MUX_CTL_PAD_EIM_DATA21(0x020E0158)
// SION [4] - Software Input On Field Reset: DISABLED
// Force the selected mux mode Input path no matter of MUX_MODE functionality.
// DISABLED (0) - Input Path is determined by functionality of the selected mux mode (regular).
// ENABLED (1) - Force input path of pad.
// MUX_MODE [2:0] - MUX Mode Select Field Reset: ALT5
// Select iomux modes to be used for pad.
// ALT0 (0) - Select instance: eim signal: EIM_DATA21
// ALT1 (1) - Select instance: ecspi4 signal: ECSPI4_SCLK
// ALT2 (2) - Select instance: ipu1 signal: IPU1_DI0_PIN17
// ALT3 (3) - Select instance: ipu1 signal: IPU1_CSI1_DATA11
// ALT4 (4) - Select instance: usb signal: USB_OTG_OC
// ALT5 (5) - Select instance: gpio3 signal: GPIO3_IO21
// ALT6 (6) - Select instance: i2c1 signal: I2C1_SCL
// ALT7 (7) - Select instance: spdif signal: SPDIF_IN
HW_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA21_WR(
BF_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA21_SION_V(DISABLED) |
BF_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA21_MUX_MODE_V(ALT4));
// Pad Control Register:
// IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21(0x020E0528)
// HYS [16] - Hysteresis Enable Field Reset: ENABLED
// DISABLED (0) - CMOS input
// ENABLED (1) - Schmitt trigger input
// PUS [15:14] - Pull Up / Down Config. Field Reset: 100K_OHM_PU
// 100K_OHM_PD (0) - 100K Ohm Pull Down
// 47K_OHM_PU (1) - 47K Ohm Pull Up
// 100K_OHM_PU (2) - 100K Ohm Pull Up
// 22K_OHM_PU (3) - 22K Ohm Pull Up
// PUE [13] - Pull / Keep Select Field Reset: PULL
// KEEP (0) - Keeper Enabled
// PULL (1) - Pull Enabled
// PKE [12] - Pull / Keep Enable Field Reset: ENABLED
// DISABLED (0) - Pull/Keeper Disabled
// ENABLED (1) - Pull/Keeper Enabled
// ODE [11] - Open Drain Enable Field Reset: DISABLED
// Enables open drain of the pin.
// DISABLED (0) - Output is CMOS.
// ENABLED (1) - Output is Open Drain.
// SPEED [7:6] - Speed Field Reset: 100MHZ
// RESERVED0 (0) - Reserved
// 50MHZ (1) - Low (50 MHz)
// 100MHZ (2) - Medium (100 MHz)
// 200MHZ (3) - Maximum (200 MHz)
// DSE [5:3] - Drive Strength Field Reset: 40_OHM
// HIZ (0) - HI-Z
// 240_OHM (1) - 240 Ohm
// 120_OHM (2) - 120 Ohm
// 80_OHM (3) - 80 Ohm
// 60_OHM (4) - 60 Ohm
// 48_OHM (5) - 48 Ohm
// 40_OHM (6) - 40 Ohm
// 34_OHM (7) - 34 Ohm
// SRE [0] - Slew Rate Field Reset: SLOW
// Slew rate control.
// SLOW (0) - Slow Slew Rate
// FAST (1) - Fast Slew Rate
HW_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_WR(
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_HYS_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_PUS_V(100K_OHM_PU) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_PUE_V(PULL) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_PKE_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_ODE_V(DISABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_SPEED_V(100MHZ) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_DSE_V(40_OHM) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA21_SRE_V(SLOW));
// Pad EIM_DATA21 is involved in Daisy Chain.
// Input Select Register:
// IOMUXC_USB_OTG_OC_SELECT_INPUT(0x020E0920)
// DAISY [0] - MUX Mode Select Field Reset: EIM_DATA21_ALT4
// Selecting Pads Involved in Daisy Chain.
// EIM_DATA21_ALT4 (0) - Select signal usb USB_OTG_OC as input from pad EIM_DATA21(ALT4).
// KEY_COL4_ALT2 (1) - Select signal usb USB_OTG_OC as input from pad KEY_COL4(ALT2).
HW_IOMUXC_USB_OTG_OC_SELECT_INPUT_WR(
BF_IOMUXC_USB_OTG_OC_SELECT_INPUT_DAISY_V(EIM_DATA21_ALT4));
// Config usb.USB_OTG_PWR to pad EIM_DATA22(E23)
// HW_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA22_WR(0x00000004);
// HW_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA22_WR(0x0001B0B0);
// Mux Register:
// IOMUXC_SW_MUX_CTL_PAD_EIM_DATA22(0x020E015C)
// SION [4] - Software Input On Field Reset: DISABLED
// Force the selected mux mode Input path no matter of MUX_MODE functionality.
// DISABLED (0) - Input Path is determined by functionality of the selected mux mode (regular).
// ENABLED (1) - Force input path of pad.
// MUX_MODE [3:0] - MUX Mode Select Field Reset: ALT5
// Select iomux modes to be used for pad.
// ALT0 (0) - Select instance: eim signal: EIM_DATA22
// ALT1 (1) - Select instance: ecspi4 signal: ECSPI4_MISO
// ALT2 (2) - Select instance: ipu1 signal: IPU1_DI0_PIN01
// ALT3 (3) - Select instance: ipu1 signal: IPU1_CSI1_DATA10
// ALT4 (4) - Select instance: usb signal: USB_OTG_PWR
// ALT5 (5) - Select instance: gpio3 signal: GPIO3_IO22
// ALT6 (6) - Select instance: spdif signal: SPDIF_OUT
// ALT8 (8) - Select instance: epdc signal: EPDC_SDCE6
HW_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA22_WR(
BF_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA22_SION_V(DISABLED) |
BF_IOMUXC_SW_MUX_CTL_PAD_EIM_DATA22_MUX_MODE_V(ALT4));
// Pad Control Register:
// IOMUXC_SW_PAD_CTL_PAD_EIM_DATA22(0x020E052C)
// HYS [16] - Hysteresis Enable Field Reset: ENABLED
// DISABLED (0) - CMOS input
// ENABLED (1) - Schmitt trigger input
// PUS [15:14] - Pull Up / Down Config. Field Reset: 100K_OHM_PD
// 100K_OHM_PD (0) - 100K Ohm Pull Down
// 47K_OHM_PU (1) - 47K Ohm Pull Up
// 100K_OHM_PU (2) - 100K Ohm Pull Up
// 22K_OHM_PU (3) - 22K Ohm Pull Up
// PUE [13] - Pull / Keep Select Field Reset: PULL
// KEEP (0) - Keeper Enabled
// PULL (1) - Pull Enabled
// PKE [12] - Pull / Keep Enable Field Reset: ENABLED
// DISABLED (0) - Pull/Keeper Disabled
// ENABLED (1) - Pull/Keeper Enabled
// ODE [11] - Open Drain Enable Field Reset: DISABLED
// Enables open drain of the pin.
// DISABLED (0) - Output is CMOS.
// ENABLED (1) - Output is Open Drain.
// SPEED [7:6] - Speed Field Reset: 100MHZ
// RESERVED0 (0) - Reserved
// 50MHZ (1) - Low (50 MHz)
// 100MHZ (2) - Medium (100 MHz)
// 200MHZ (3) - Maximum (200 MHz)
// DSE [5:3] - Drive Strength Field Reset: 40_OHM
// HIZ (0) - HI-Z
// 240_OHM (1) - 240 Ohm
// 120_OHM (2) - 120 Ohm
// 80_OHM (3) - 80 Ohm
// 60_OHM (4) - 60 Ohm
// 48_OHM (5) - 48 Ohm
// 40_OHM (6) - 40 Ohm
// 34_OHM (7) - 34 Ohm
// SRE [0] - Slew Rate Field Reset: SLOW
// Slew rate control.
// SLOW (0) - Slow Slew Rate
// FAST (1) - Fast Slew Rate
HW_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA22_WR(
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA22_HYS_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA22_PUS_V(100K_OHM_PU) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA22_PUE_V(PULL) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA22_PKE_V(ENABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA22_ODE_V(DISABLED) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA22_SPEED_V(100MHZ) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA22_DSE_V(40_OHM) |
BF_IOMUXC_SW_PAD_CTL_PAD_EIM_DATA22_SRE_V(SLOW));
}
