int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count)
{
if (!dev || !dev->netdev) {
IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__);
return -1;
}
if (!dev->irlap) {
IRDA_WARNING("%s - too early: %p / %zd!\n",
__FUNCTION__, cp, count);
return -1;
}
if (cp==NULL) {
/* error already at lower level receive
* just update stats and set media busy
*/
irda_device_set_media_busy(dev->netdev, TRUE);
dev->stats.rx_dropped++;
IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __FUNCTION__, count);
return 0;
}
/* Read the characters into the buffer */
if (likely(atomic_read(&dev->enable_rx))) {
while (count--)
/* Unwrap and destuff one byte */
async_unwrap_char(dev->netdev, &dev->stats,
&dev->rx_buff, *cp++);
} else {
while (count--) {
/* rx not enabled: save the raw bytes and never
* trigger any netif_rx. The received bytes are flushed
* later when we re-enable rx but might be read meanwhile
* by the dongle driver.
*/
dev->rx_buff.data[dev->rx_buff.len++] = *cp++;
/* What should we do when the buffer is full? */
if (unlikely(dev->rx_buff.len == dev->rx_buff.truesize))
dev->rx_buff.len = 0;
}
}
return 0;
}
static int girbil_reset(struct sir_dev *dev)
{
unsigned state = dev->fsm.substate;
unsigned delay = 0;
u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
int ret = 0;
IRDA_DEBUG(2, "%s()\n", __func__);
switch (state) {
case SIRDEV_STATE_DONGLE_RESET:
/* Reset dongle */
sirdev_set_dtr_rts(dev, TRUE, FALSE);
/* Sleep at least 5 ms */
delay = 20;
state = GIRBIL_STATE_WAIT1_RESET;
break;
case GIRBIL_STATE_WAIT1_RESET:
/* Set DTR and clear RTS to enter command mode */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
delay = 20;
state = GIRBIL_STATE_WAIT2_RESET;
break;
case GIRBIL_STATE_WAIT2_RESET:
/* Write control byte */
sirdev_raw_write(dev, &control, 1);
delay = 20;
state = GIRBIL_STATE_WAIT3_RESET;
break;
case GIRBIL_STATE_WAIT3_RESET:
/* Go back to normal mode */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
dev->speed = 9600;
break;
default:
IRDA_ERROR("%s(), undefined state %d\n", __func__, state);
ret = -1;
break;
}
dev->fsm.substate = state;
return (delay > 0) ? delay : ret;
}
static int girbil_open(struct sir_dev *dev)
{
struct qos_info *qos = &dev->qos;
IRDA_DEBUG(2, "%s()\n", __func__);
/* Power on dongle */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
qos->min_turn_time.bits = 0x03;
irda_qos_bits_to_value(qos);
/* irda thread waits 50 msec for power settling */
return 0;
}
/*
Power on:
(0) Clear RTS and DTR for 1 second
(1) Set RTS and DTR for 1 second
(2) 9600 bps now
Note: assume RTS, DTR are clear before
*/
static void ma600_open(dongle_t *self, struct qos_info *qos)
{
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400
|IR_57600|IR_115200;
qos->min_turn_time.bits = 0x01; /* Needs at least 1 ms */
irda_qos_bits_to_value(qos);
//self->set_dtr_rts(self->dev, FALSE, FALSE);
// should wait 1 second
self->set_dtr_rts(self->dev, TRUE, TRUE);
// should wait 1 second
MOD_INC_USE_COUNT;
}
static int girbil_open(struct sir_dev *dev)
{
struct qos_info *qos = &dev->qos;
IRDA_DEBUG(2, "%s()\n", __func__);
sirdev_set_dtr_rts(dev, TRUE, TRUE);
qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
qos->min_turn_time.bits = 0x03;
irda_qos_bits_to_value(qos);
return 0;
}
static int girbil_reset(struct sir_dev *dev)
{
unsigned state = dev->fsm.substate;
unsigned delay = 0;
u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
int ret = 0;
IRDA_DEBUG(2, "%s()\n", __func__);
switch (state) {
case SIRDEV_STATE_DONGLE_RESET:
sirdev_set_dtr_rts(dev, TRUE, FALSE);
delay = 20;
state = GIRBIL_STATE_WAIT1_RESET;
break;
case GIRBIL_STATE_WAIT1_RESET:
sirdev_set_dtr_rts(dev, FALSE, TRUE);
delay = 20;
state = GIRBIL_STATE_WAIT2_RESET;
break;
case GIRBIL_STATE_WAIT2_RESET:
sirdev_raw_write(dev, &control, 1);
delay = 20;
state = GIRBIL_STATE_WAIT3_RESET;
break;
case GIRBIL_STATE_WAIT3_RESET:
sirdev_set_dtr_rts(dev, TRUE, TRUE);
dev->speed = 9600;
break;
default:
IRDA_ERROR("%s(), undefined state %d\n", __func__, state);
ret = -1;
break;
}
dev->fsm.substate = state;
return (delay > 0) ? delay : ret;
}
/*
* Function iriap_open (void)
*
* Opens an instance of the IrIAP layer, and registers with IrLMP
*/
struct iriap_cb *iriap_open(__u8 slsap_sel, int mode, void *priv,
CONFIRM_CALLBACK callback)
{
struct iriap_cb *self;
IRDA_DEBUG(2, "%s()\n", __func__);
self = kzalloc(sizeof(*self), GFP_ATOMIC);
if (!self) {
IRDA_WARNING("%s: Unable to kmalloc!\n", __func__);
return NULL;
}
/*
* Initialize instance
*/
self->magic = IAS_MAGIC;
self->mode = mode;
if (mode == IAS_CLIENT) {
if (iriap_register_lsap(self, slsap_sel, mode)) {
kfree(self);
return NULL;
}
}
self->confirm = callback;
self->priv = priv;
/* iriap_getvaluebyclass_request() will construct packets before
* we connect, so this must have a sane value... Jean II */
self->max_header_size = LMP_MAX_HEADER;
init_timer(&self->watchdog_timer);
hashbin_insert(iriap, (irda_queue_t *) self, (long) self, NULL);
/* Initialize state machines */
iriap_next_client_state(self, S_DISCONNECT);
iriap_next_call_state(self, S_MAKE_CALL);
iriap_next_server_state(self, R_DISCONNECT);
iriap_next_r_connect_state(self, R_WAITING);
return self;
}
/*
* Function ircomm_ttp_connect_request (self, userdata)
*
*
*
*/
int ircomm_ttp_connect_request(struct ircomm_cb *self,
struct sk_buff *userdata,
struct ircomm_info *info)
{
int ret = 0;
IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
/* Don't forget to refcount it - should be NULL anyway */
if(userdata)
skb_get(userdata);
ret = irttp_connect_request(self->tsap, info->dlsap_sel,
info->saddr, info->daddr, NULL,
TTP_SAR_DISABLE, userdata);
return ret;
}
/*
* Function irlan_eth_open (dev)
*
* Network device has been opened by user
*
*/
static int irlan_eth_open(struct net_device *dev)
{
struct irlan_cb *self = netdev_priv(dev);
IRDA_DEBUG(2, "%s()\n", __func__ );
/* Ready to play! */
netif_stop_queue(dev); /* Wait until data link is ready */
/* We are now open, so time to do some work */
self->disconnect_reason = 0;
irlan_client_wakeup(self, self->saddr, self->daddr);
/* Make sure we have a hardware address before we return,
so DHCP clients gets happy */
return wait_event_interruptible(self->open_wait,
!self->tsap_data->connected);
}
/*
* Function ircomm_tty_tiocmget (tty)
*
*
*
*/
int ircomm_tty_tiocmget(struct tty_struct *tty)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
unsigned int result;
IRDA_DEBUG(2, "%s()\n", __func__ );
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
result = ((self->settings.dte & IRCOMM_RTS) ? TIOCM_RTS : 0)
| ((self->settings.dte & IRCOMM_DTR) ? TIOCM_DTR : 0)
| ((self->settings.dce & IRCOMM_CD) ? TIOCM_CAR : 0)
| ((self->settings.dce & IRCOMM_RI) ? TIOCM_RNG : 0)
| ((self->settings.dce & IRCOMM_DSR) ? TIOCM_DSR : 0)
| ((self->settings.dce & IRCOMM_CTS) ? TIOCM_CTS : 0);
return result;
}
int ma600_reset(struct sir_dev *dev)
{
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
/* Reset the dongle : set DTR low for 10 ms */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(msecs_to_jiffies(10));
/* Go back to normal mode */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(msecs_to_jiffies(10));
dev->speed = 9600; /* That's the dongle-default */
return 0;
}
static int litelink_open(struct sir_dev *dev)
{
struct qos_info *qos = &dev->qos;
IRDA_DEBUG(2, "%s()\n", __func__);
/* Power up dongle */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
/* Set the speeds we can accept */
qos->baud_rate.bits &= IR_115200|IR_57600|IR_38400|IR_19200|IR_9600;
qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
irda_qos_bits_to_value(qos);
/* irda thread waits 50 msec for power settling */
return 0;
}
/*
* Function ircomm_tty_set_termios (tty, old_termios)
*
* This routine allows the tty driver to be notified when device's
* termios settings have changed. Note that a well-designed tty driver
* should be prepared to accept the case where old == NULL, and try to
* do something rational.
*/
void ircomm_tty_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
unsigned int cflag = tty->termios->c_cflag;
IRDA_DEBUG(2, "%s()\n", __func__ );
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(tty->termios->c_iflag) ==
RELEVANT_IFLAG(old_termios->c_iflag)))
{
return;
}
ircomm_tty_change_speed(self);
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) &&
!(cflag & CBAUD)) {
self->settings.dte &= ~(IRCOMM_DTR|IRCOMM_RTS);
ircomm_param_request(self, IRCOMM_DTE, TRUE);
}
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
(cflag & CBAUD)) {
self->settings.dte |= IRCOMM_DTR;
if (!(tty->termios->c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
self->settings.dte |= IRCOMM_RTS;
}
ircomm_param_request(self, IRCOMM_DTE, TRUE);
}
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS))
{
tty->hw_stopped = 0;
ircomm_tty_start(tty);
}
}
static int old_belkin_open(struct sir_dev *dev)
{
struct qos_info *qos = &dev->qos;
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
/* Power on dongle */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
/* Not too fast, please... */
qos->baud_rate.bits &= IR_9600;
/* Needs at least 10 ms (totally wild guess, can do probably better) */
qos->min_turn_time.bits = 0x01;
irda_qos_bits_to_value(qos);
/* irda thread waits 50 msec for power settling */
return 0;
}
/*
Power on:
(0) Clear RTS and DTR for 1 second
(1) Set RTS and DTR for 1 second
(2) 9600 bps now
Note: assume RTS, DTR are clear before
*/
static int ma600_open(struct sir_dev *dev)
{
struct qos_info *qos = &dev->qos;
IRDA_DEBUG(2, "%s()\n", __func__);
sirdev_set_dtr_rts(dev, TRUE, TRUE);
/* Explicitly set the speeds we can accept */
qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400
|IR_57600|IR_115200;
/* Hm, 0x01 means 10ms - for >= 1ms we would need 0x07 */
qos->min_turn_time.bits = 0x01; /* Needs at least 1 ms */
irda_qos_bits_to_value(qos);
/* irda thread waits 50 msec for power settling */
return 0;
}
/*
* Function irda_device_is_receiving (dev)
*
* Check if the device driver is currently receiving data
*
*/
int irda_device_is_receiving(struct net_device *dev)
{
struct if_irda_req req;
int ret;
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
if (!dev->do_ioctl) {
IRDA_ERROR("%s: do_ioctl not impl. by device driver\n",
__FUNCTION__);
return -1;
}
ret = dev->do_ioctl(dev, (struct ifreq *) &req, SIOCGRECEIVING);
if (ret < 0)
return ret;
return req.ifr_receiving;
}
static irda_queue_t *dequeue_first(irda_queue_t **queue)
{
irda_queue_t *ret;
IRDA_DEBUG( 4, "dequeue_first()\n");
ret = *queue;
if ( *queue == NULL ) {
} else if ( (*queue)->q_next == *queue ) {
*queue = NULL;
} else {
(*queue)->q_prev->q_next = (*queue)->q_next;
(*queue)->q_next->q_prev = (*queue)->q_prev;
*queue = (*queue)->q_next;
}
return ret;
}
static int tekram_reset(struct sir_dev *dev)
{
IRDA_DEBUG(2, "%s()\n", __func__);
sirdev_set_dtr_rts(dev, FALSE, TRUE);
msleep(1);
sirdev_set_dtr_rts(dev, TRUE, TRUE);
udelay(75);
dev->speed = 9600;
return 0;
}
static int tekram_reset(struct sir_dev *dev)
{
IRDA_DEBUG(2, "%s()\n", __func__);
/* Clear DTR, Set RTS */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
/* Should sleep 1 ms */
msleep(1);
/* Set DTR, Set RTS */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
/* Wait at least 50 us */
udelay(75);
dev->speed = 9600;
return 0;
}
/*
* Function irlap_queue_xmit (self, skb)
*
* A little wrapper for dev_queue_xmit, so we can insert some common
* code into it.
*/
void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb)
{
/* Some common init stuff */
skb->dev = self->netdev;
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
skb->protocol = htons(ETH_P_IRDA);
skb->priority = TC_PRIO_BESTEFFORT;
irlap_insert_info(self, skb);
if (unlikely(self->mode & IRDA_MODE_MONITOR)) {
IRDA_DEBUG(3, "%s(): %s is in monitor mode\n", __func__,
self->netdev->name);
dev_kfree_skb(skb);
return;
}
dev_queue_xmit(skb);
}
static irda_queue_t *dequeue_general(irda_queue_t **queue, irda_queue_t* element)
{
irda_queue_t *ret;
IRDA_DEBUG( 4, "dequeue_general()\n");
ret = *queue;
if ( *queue == NULL ) {
} else if ( (*queue)->q_next == *queue ) {
*queue = NULL;
} else {
element->q_prev->q_next = element->q_next;
element->q_next->q_prev = element->q_prev;
if ( (*queue) == element)
(*queue) = element->q_next;
}
return ret;
}
static int tekram_reset(struct sir_dev *dev)
{
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
/* Clear DTR, Set RTS */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
/* Should sleep 1 ms */
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(MSECS_TO_JIFFIES(1));
/* Set DTR, Set RTS */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
/* Wait at least 50 us */
udelay(75);
dev->speed = 9600;
return 0;
}
static int mcp2120_reset(struct sir_dev *dev)
{
unsigned state = dev->fsm.substate;
unsigned delay = 0;
int ret = 0;
IRDA_DEBUG(2, "%s()\n", __func__);
switch (state) {
case SIRDEV_STATE_DONGLE_RESET:
;
/* Reset dongle by setting RTS*/
sirdev_set_dtr_rts(dev, TRUE, TRUE);
state = MCP2120_STATE_WAIT1_RESET;
delay = 50;
break;
case MCP2120_STATE_WAIT1_RESET:
;
/* clear RTS and wait for at least 30 ms. */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
state = MCP2120_STATE_WAIT2_RESET;
delay = 50;
break;
case MCP2120_STATE_WAIT2_RESET:
;
/* Go back to normal mode */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
break;
default:
IRDA_ERROR("%s(), undefined state %d\n", __func__, state);
ret = -EINVAL;
break;
}
dev->fsm.substate = state;
return (delay > 0) ? delay : ret;
}
/*
* Function actisys_change_speed (task)
*
* Change speed of the ACTiSYS IR-220L and IR-220L+ type IrDA dongles.
* To cycle through the available baud rates, pulse RTS low for a few us.
*
* First, we reset the dongle to always start from a known state.
* Then, we cycle through the speeds by pulsing RTS low and then up.
* The dongle allow us to pulse quite fast, se we can set speed in one go,
* which is must faster ( < 100 us) and less complex than what is found
* in some other dongle drivers...
* Note that even if the new speed is the same as the current speed,
* we reassert the speed. This make sure that things are all right,
* and it's fast anyway...
* By the way, this function will work for both type of dongles,
* because the additional speed is at the end of the sequence...
*/
static int actisys_change_speed(struct sir_dev *dev, unsigned speed)
{
int ret = 0;
int i = 0;
IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__,
speed, dev->speed);
/* dongle was already resetted from irda_request state machine,
* we are in known state (dongle default)
*/
/*
* Now, we can set the speed requested. Send RTS pulses until we
* reach the target speed
*/
for (i = 0; i < MAX_SPEEDS; i++) {
if (speed == baud_rates[i]) {
dev->speed = speed;
break;
}
/* Set RTS low for 10 us */
sirdev_set_dtr_rts(dev, TRUE, FALSE);
udelay(MIN_DELAY);
/* Set RTS high for 10 us */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
udelay(MIN_DELAY);
}
/* Check if life is sweet... */
if (i >= MAX_SPEEDS) {
actisys_reset(dev);
ret = -EINVAL; /* This should not happen */
}
/* Basta lavoro, on se casse d'ici... */
return ret;
}
int ircomm_lmp_disconnect_request(struct ircomm_cb *self,
struct sk_buff *userdata,
struct ircomm_info *info)
{
struct sk_buff *skb;
int ret;
IRDA_DEBUG(0, __FUNCTION__ "()\n");
if (!userdata) {
skb = dev_alloc_skb(64);
if (!skb)
return -ENOMEM;
/* Reserve space for MUX and LAP header */
skb_reserve(skb, LMP_MAX_HEADER);
userdata = skb;
}
ret = irlmp_disconnect_request(self->lsap, userdata);
return ret;
}
static int ircomm_state_idle(struct ircomm_cb *self, IRCOMM_EVENT event,
struct sk_buff *skb, struct ircomm_info *info)
{
int ret = 0;
switch (event) {
case IRCOMM_CONNECT_REQUEST:
ircomm_next_state(self, IRCOMM_WAITI);
ret = self->issue.connect_request(self, skb, info);
break;
case IRCOMM_TTP_CONNECT_INDICATION:
case IRCOMM_LMP_CONNECT_INDICATION:
ircomm_next_state(self, IRCOMM_WAITR);
ircomm_connect_indication(self, skb, info);
break;
default:
IRDA_DEBUG(4, "%s(), unknown event: %s\n", __func__ ,
ircomm_event[event]);
ret = -EINVAL;
}
return ret;
}
/*
* Function irlan_eth_close (dev)
*
* Stop the ether network device, his function will usually be called by
* ifconfig down. We should now disconnect the link, We start the
* close timer, so that the instance will be removed if we are unable
* to discover the remote device after the disconnect.
*/
static int irlan_eth_close(struct net_device *dev)
{
struct irlan_cb *self = netdev_priv(dev);
IRDA_DEBUG(2, "%s()\n", __func__ );
/* Stop device */
netif_stop_queue(dev);
irlan_close_data_channel(self);
irlan_close_tsaps(self);
irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL);
irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL);
/* Remove frames queued on the control channel */
skb_queue_purge(&self->client.txq);
self->client.tx_busy = 0;
return 0;
}
/*
* Function irlmp_init (void)
*
* Create (allocate) the main IrLMP structure
*
*/
int __init irlmp_init(void)
{
IRDA_DEBUG(1, "%s()\n", __func__);
/* Initialize the irlmp structure. */
irlmp = kzalloc( sizeof(struct irlmp_cb), GFP_KERNEL);
if (irlmp == NULL)
return -ENOMEM;
irlmp->magic = LMP_MAGIC;
irlmp->clients = hashbin_new(HB_LOCK);
irlmp->services = hashbin_new(HB_LOCK);
irlmp->links = hashbin_new(HB_LOCK);
irlmp->unconnected_lsaps = hashbin_new(HB_LOCK);
irlmp->cachelog = hashbin_new(HB_NOLOCK);
if ((irlmp->clients == NULL) ||
(irlmp->services == NULL) ||
(irlmp->links == NULL) ||
(irlmp->unconnected_lsaps == NULL) ||
(irlmp->cachelog == NULL)) {
return -ENOMEM;
}
spin_lock_init(&irlmp->cachelog->hb_spinlock);
irlmp->last_lsap_sel = 0x0f; /* Reserved 0x00-0x0f */
strcpy(sysctl_devname, "Linux");
init_timer(&irlmp->discovery_timer);
/* Do discovery every 3 seconds, conditionally */
if (sysctl_discovery)
irlmp_start_discovery_timer(irlmp,
sysctl_discovery_timeout*HZ);
return 0;
}
/*
* Function iriap_open (void)
*
* Opens an instance of the IrIAP layer, and registers with IrLMP
*/
struct iriap_cb *iriap_open(__u8 slsap_sel, int mode, void *priv,
CONFIRM_CALLBACK callback)
{
struct iriap_cb *self;
IRDA_DEBUG(2, __FUNCTION__ "()\n");
self = kmalloc(sizeof(struct iriap_cb), GFP_ATOMIC);
if (!self) {
WARNING(__FUNCTION__ "(), Unable to kmalloc!\n");
return NULL;
}
/*
* Initialize instance
*/
memset(self, 0, sizeof(struct iriap_cb));
self->magic = IAS_MAGIC;
self->mode = mode;
if (mode == IAS_CLIENT)
iriap_register_lsap(self, slsap_sel, mode);
self->confirm = callback;
self->priv = priv;
init_timer(&self->watchdog_timer);
hashbin_insert(iriap, (irda_queue_t *) self, (int) self, NULL);
/* Initialize state machines */
iriap_next_client_state(self, S_DISCONNECT);
iriap_next_call_state(self, S_MAKE_CALL);
iriap_next_server_state(self, R_DISCONNECT);
iriap_next_r_connect_state(self, R_WAITING);
return self;
}
/*
* Function ias_new_object (name, id)
*
* Create a new IAS object
*
*/
struct ias_object *irias_new_object( char *name, int id)
{
struct ias_object *obj;
IRDA_DEBUG( 4, "%s()\n", __func__);
obj = kzalloc(sizeof(struct ias_object), GFP_ATOMIC);
if (obj == NULL) {
IRDA_WARNING("%s(), Unable to allocate object!\n",
__func__);
return NULL;
}
obj->magic = IAS_OBJECT_MAGIC;
obj->name = kstrndup(name, IAS_MAX_CLASSNAME, GFP_ATOMIC);
if (!obj->name) {
IRDA_WARNING("%s(), Unable to allocate name!\n",
__func__);
kfree(obj);
return NULL;
}
obj->id = id;
/* Locking notes : the attrib spinlock has lower precendence
* than the objects spinlock. Never grap the objects spinlock
* while holding any attrib spinlock (risk of deadlock). Jean II */
obj->attribs = hashbin_new(HB_LOCK);
if (obj->attribs == NULL) {
IRDA_WARNING("%s(), Unable to allocate attribs!\n",
__func__);
kfree(obj->name);
kfree(obj);
return NULL;
}
return obj;
}
