int LIB_EDIT_FRAME::BlockSelectItems( LIB_PART* aPart, BLOCK_SELECTOR* aBlock, int aUnit, int aConvert, bool aSyncPinEdit )
{
int itemCount = 0;
for( LIB_ITEM& item : aPart->GetDrawItems() )
{
item.ClearFlags( SELECTED );
if( ( item.GetUnit() && item.GetUnit() != aUnit )
|| ( item.GetConvert() && item.GetConvert() != aConvert ) )
{
if( item.Type() != LIB_PIN_T )
continue;
// Specific rules for pins:
// - do not select pins in other units when synchronized pin edit mode is disabled
// - do not select pins in other units when units are not interchangeable
// - in other cases verify if the pin belongs to the requested unit
if( !aSyncPinEdit || aPart->UnitsLocked()
|| ( item.GetConvert() && item.GetConvert() != aConvert ) )
continue;
}
if( item.Inside( *aBlock ) )
{
auto picker = ITEM_PICKER( &item );
aBlock->PushItem( picker );
item.SetFlags( SELECTED );
itemCount++;
}
}
return itemCount;
}
void SCH_EDIT_FRAME::EndSegment( wxDC* DC )
{
SCH_SCREEN* screen = GetScreen();
SCH_LINE* segment = (SCH_LINE*) screen->GetCurItem();
if( segment == NULL || segment->Type() != SCH_LINE_T || !segment->IsNew() )
return;
// Delete zero length segments and clear item flags.
SCH_ITEM* item = s_wires.begin();
while( item )
{
item->ClearFlags();
wxCHECK_RET( item->Type() == SCH_LINE_T, wxT( "Unexpected object type in wire list." ) );
segment = (SCH_LINE*) item;
item = item->Next();
if( segment->IsNull() )
delete s_wires.Remove( segment );
}
if( s_wires.GetCount() == 0 )
return;
// Get the last non-null wire (this is the last created segment).
SetRepeatItem( segment = (SCH_LINE*) s_wires.GetLast() );
screen->SetCurItem( NULL );
m_canvas->EndMouseCapture( -1, -1, wxEmptyString, false );
// store the terminal point of this last segment: a junction could be needed
// (the last wire could be merged/deleted/modified, and lost)
wxPoint endpoint = segment->GetEndPoint();
// store the starting point of this first segment: a junction could be needed
SCH_LINE* firstsegment = (SCH_LINE*) s_wires.GetFirst();
wxPoint startPoint = firstsegment->GetStartPoint();
// Save the old wires for the undo command
DLIST< SCH_ITEM > oldWires; // stores here the old wires
GetScreen()->ExtractWires( oldWires, true ); // Save them in oldWires list
// Put the snap shot of the previous wire, buses, and junctions in the undo/redo list.
PICKED_ITEMS_LIST oldItems;
oldItems.m_Status = UR_WIRE_IMAGE;
while( oldWires.GetCount() != 0 )
{
ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE );
oldItems.PushItem( picker );
}
SaveCopyInUndoList( oldItems, UR_WIRE_IMAGE );
// Remove segments backtracking over others
RemoveBacktracks( s_wires );
// Add the new wires
screen->Append( s_wires );
// Correct and remove segments that need to be merged.
screen->SchematicCleanUp();
// A junction could be needed to connect the end point of the last created segment.
if( screen->IsJunctionNeeded( endpoint ) )
screen->Append( AddJunction( DC, endpoint ) );
// A junction could be needed to connect the start point of the set of new created wires
if( screen->IsJunctionNeeded( startPoint ) )
screen->Append( AddJunction( DC, startPoint ) );
m_canvas->Refresh();
OnModify();
}
void SCH_EDIT_FRAME::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRedoCommand )
{
SCH_ITEM* item;
SCH_ITEM* alt_item;
// Exchange the current wires, buses, and junctions with the copy save by the last edit.
if( aList->m_Status == UR_WIRE_IMAGE )
{
DLIST< SCH_ITEM > oldWires;
// Prevent items from being deleted when the DLIST goes out of scope.
oldWires.SetOwnership( false );
// Remove all of the wires, buses, and junctions from the current screen.
GetScreen()->ExtractWires( oldWires, false );
// Copy the saved wires, buses, and junctions to the current screen.
for( unsigned int i = 0; i < aList->GetCount(); i++ )
GetScreen()->Append( (SCH_ITEM*) aList->GetPickedItem( i ) );
aList->ClearItemsList();
// Copy the previous wires, buses, and junctions to the picked item list for the
// redo operation.
while( oldWires.GetCount() != 0 )
{
ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE );
aList->PushItem( picker );
}
return;
}
// Undo in the reverse order of list creation: (this can allow stacked changes like the
// same item can be changes and deleted in the same complex command.
for( int ii = aList->GetCount() - 1; ii >= 0; ii-- )
{
item = (SCH_ITEM*) aList->GetPickedItem( ii );
wxASSERT( item );
item->ClearFlags();
SCH_ITEM* image = (SCH_ITEM*) aList->GetPickedItemLink( ii );
switch( aList->GetPickedItemStatus( ii ) )
{
case UR_CHANGED: /* Exchange old and new data for each item */
item->SwapData( image );
break;
case UR_NEW: /* new items are deleted */
aList->SetPickedItemStatus( UR_DELETED, ii );
GetScreen()->Remove( item );
break;
case UR_DELETED: /* deleted items are put in the draw item list, as new items */
aList->SetPickedItemStatus( UR_NEW, ii );
GetScreen()->Append( item );
break;
case UR_MOVED:
item->ClearFlags();
item->SetFlags( aList->GetPickerFlags( ii ) );
item->Move( aRedoCommand ? aList->m_TransformPoint : -aList->m_TransformPoint );
item->ClearFlags();
break;
case UR_MIRRORED_Y:
item->MirrorY( aList->m_TransformPoint.x );
break;
case UR_MIRRORED_X:
item->MirrorX( aList->m_TransformPoint.y );
break;
case UR_ROTATED:
// To undo a rotate 90 deg transform we must rotate 270 deg to undo
// and 90 deg to redo:
item->Rotate( aList->m_TransformPoint );
if( aRedoCommand )
break; // A only one rotate transform is OK
// Make 3 rotate 90 deg transforms is this is actually an undo command
item->Rotate( aList->m_TransformPoint );
item->Rotate( aList->m_TransformPoint );
break;
case UR_EXCHANGE_T:
alt_item = (SCH_ITEM*) aList->GetPickedItemLink( ii );
alt_item->SetNext( NULL );
alt_item->SetBack( NULL );
GetScreen()->Remove( item );
GetScreen()->Append( alt_item );
aList->SetPickedItem( alt_item, ii );
aList->SetPickedItemLink( item, ii );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Unknown undo/redo command %d" ),
aList->GetPickedItemStatus( ii ) ) );
break;
}
}
}
void SCH_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
pos = wxGetMousePosition();
pos.y += 20;
// If needed, stop the current command and deselect current tool
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_CANCEL_CURRENT_COMMAND:
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
case ID_POPUP_SCH_BEGIN_WIRE:
case ID_POPUP_SCH_BEGIN_BUS:
case ID_POPUP_END_LINE:
case ID_POPUP_SCH_SET_SHAPE_TEXT:
case ID_POPUP_SCH_CLEANUP_SHEET:
case ID_POPUP_SCH_END_SHEET:
case ID_POPUP_SCH_RESIZE_SHEET:
case ID_POPUP_IMPORT_GLABEL:
case ID_POPUP_SCH_INIT_CMP:
case ID_POPUP_SCH_DISPLAYDOC_CMP:
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_DRAG_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
case ID_POPUP_SCH_ENTER_SHEET:
case ID_POPUP_SCH_LEAVE_SHEET:
case ID_POPUP_SCH_ADD_JUNCTION:
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_GETINFO_MARKER:
/* At this point: Do nothing. these commands do not need to stop the
* current command (mainly a block command) or reset the current state
* They will be executed later, in next switch structure.
*/
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
// Stop the current command (if any) but keep the current tool
m_canvas->EndMouseCapture();
break;
default:
// Stop the current command and deselect the current tool
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
break;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
item = screen->GetCurItem(); // Can be modified by previous calls.
switch( id )
{
case ID_HIERARCHY:
InstallHierarchyFrame( &dc, pos );
SetRepeatItem( NULL );
break;
case wxID_CUT:
if( screen->m_BlockLocate.GetCommand() != BLOCK_MOVE )
break;
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetRepeatItem( NULL );
SetSheetNumberAndCount();
break;
case wxID_PASTE:
HandleBlockBegin( &dc, BLOCK_PASTE, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '/' );
break;
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '\\' );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
SetToolID( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString );
}
else
{
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
case ID_POPUP_END_LINE:
m_canvas->MoveCursorToCrossHair();
EndSegment( &dc );
break;
case ID_POPUP_SCH_BEGIN_WIRE:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_BEGIN_BUS:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_SET_SHAPE_TEXT:
// Not used
break;
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
m_canvas->MoveCursorToCrossHair();
DeleteConnection( id == ID_POPUP_SCH_DELETE_CONNECTION );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
m_canvas->Refresh();
break;
case ID_POPUP_SCH_BREAK_WIRE:
{
DLIST< SCH_ITEM > oldWires;
oldWires.SetOwnership( false ); // Prevent DLIST for deleting items in destructor.
m_canvas->MoveCursorToCrossHair();
screen->ExtractWires( oldWires, true );
screen->BreakSegment( GetCrossHairPosition() );
if( oldWires.GetCount() != 0 )
{
PICKED_ITEMS_LIST oldItems;
oldItems.m_Status = UR_WIRE_IMAGE;
while( oldWires.GetCount() != 0 )
{
ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE );
oldItems.PushItem( picker );
}
SaveCopyInUndoList( oldItems, UR_WIRE_IMAGE );
}
screen->TestDanglingEnds( m_canvas, &dc );
}
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
if( item == NULL )
break;
DeleteItem( item );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
SetSheetNumberAndCount();
OnModify();
break;
case ID_POPUP_SCH_END_SHEET:
m_canvas->MoveCursorToCrossHair();
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_RESIZE_SHEET:
ReSizeSheet( (SCH_SHEET*) item, &dc );
screen->TestDanglingEnds( m_canvas, &dc );
break;
case ID_POPUP_IMPORT_GLABEL:
if( item != NULL && item->Type() == SCH_SHEET_T )
screen->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, &dc ) );
break;
case ID_POPUP_SCH_CLEANUP_SHEET:
if( item != NULL && item->Type() == SCH_SHEET_T )
{
SCH_SHEET* sheet = (SCH_SHEET*) item;
if( !sheet->HasUndefinedPins() )
{
DisplayInfoMessage( this,
_( "There are no undefined labels in this sheet to clean up." ) );
return;
}
if( !IsOK( this, _( "Do you wish to cleanup this sheet?" ) ) )
return;
/* Save sheet in undo list before cleaning up unreferenced hierarchical labels. */
SaveCopyInUndoList( sheet, UR_CHANGED );
sheet->CleanupSheet();
OnModify();
m_canvas->RefreshDrawingRect( sheet->GetBoundingBox() );
}
break;
case ID_POPUP_SCH_INIT_CMP:
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
// Ensure the struct is a component (could be a struct of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
m_canvas->MoveCursorToCrossHair();
ConvertPart( (SCH_COMPONENT*) item, &dc );
}
break;
case ID_POPUP_SCH_DISPLAYDOC_CMP:
// Ensure the struct is a component (could be a piece of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
LIB_ALIAS* LibEntry;
LibEntry = CMP_LIBRARY::FindLibraryEntry( ( (SCH_COMPONENT*) item )->GetLibName() );
if( LibEntry && LibEntry->GetDocFileName() != wxEmptyString )
{
GetAssociatedDocument( this, LibEntry->GetDocFileName(),
&wxGetApp().GetLibraryPathList() );
}
}
break;
case ID_POPUP_SCH_ENTER_SHEET:
if( item && (item->Type() == SCH_SHEET_T) )
{
m_CurrentSheet->Push( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
break;
case ID_POPUP_SCH_LEAVE_SHEET:
m_CurrentSheet->Pop();
DisplayCurrentSheet();
break;
case wxID_COPY: // really this is a Save block for paste
screen->m_BlockLocate.SetCommand( BLOCK_SAVE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_PLACE_BLOCK:
m_canvas->SetAutoPanRequest( false );
m_canvas->MoveCursorToCrossHair();
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
screen->m_BlockLocate.SetCommand( BLOCK_ZOOM );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetSheetNumberAndCount();
break;
case ID_POPUP_COPY_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_COPY );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DRAG_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DRAG );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_SCH_ADD_JUNCTION:
m_canvas->MoveCursorToCrossHair();
screen->SetCurItem( AddJunction( &dc, GetCrossHairPosition(), true ) );
screen->TestDanglingEnds( m_canvas, &dc );
screen->SetCurItem( NULL );
break;
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_ADD_GLABEL:
screen->SetCurItem( CreateNewText( &dc, id == ID_POPUP_SCH_ADD_LABEL ?
LAYER_LOCLABEL : LAYER_GLOBLABEL ) );
item = screen->GetCurItem();
if( item )
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_GETINFO_MARKER:
if( item && item->Type() == SCH_MARKER_T )
( (SCH_MARKER*) item )->DisplayMarkerInfo( this );
break;
default: // Log error:
wxFAIL_MSG( wxString::Format( wxT( "Cannot process command event ID %d" ),
event.GetId() ) );
break;
}
// End switch ( id ) (Command execution)
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetRepeatItem( NULL );
}
void PCB_EDIT_FRAME::SaveCopyInUndoList( const PICKED_ITEMS_LIST& aItemsList,
UNDO_REDO_T aTypeCommand,
const wxPoint& aTransformPoint )
{
PICKED_ITEMS_LIST* commandToUndo = new PICKED_ITEMS_LIST();
commandToUndo->m_TransformPoint = aTransformPoint;
// First, filter unnecessary stuff from the list (i.e. for multiple pads / labels modified),
// take the first occurence of the module.
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
ITEM_PICKER picker = aItemsList.GetItemWrapper(ii);
BOARD_ITEM* item = (BOARD_ITEM*) aItemsList.GetPickedItem( ii );
// For texts belonging to modules, we need to save state of the parent module
if( item->Type() == PCB_MODULE_TEXT_T || item->Type() == PCB_PAD_T )
{
item = item->GetParent();
wxASSERT( item->Type() == PCB_MODULE_T );
if( item == NULL )
continue;
bool found = false;
for( unsigned j = 0; j < commandToUndo->GetCount(); j++ )
{
if( commandToUndo->GetPickedItem( j ) == item && commandToUndo->GetPickedItemStatus( j ) == UR_CHANGED )
{
found = true;
break;
}
}
if( !found )
commandToUndo->PushItem( ITEM_PICKER(item, UR_CHANGED ) );
else
continue;
} else {
commandToUndo->PushItem( picker );
}
}
for( unsigned ii = 0; ii < commandToUndo->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) commandToUndo->GetPickedItem( ii );
UNDO_REDO_T command = commandToUndo->GetPickedItemStatus( ii );
if( command == UR_UNSPECIFIED )
{
command = aTypeCommand;
commandToUndo->SetPickedItemStatus( command, ii );
}
wxASSERT( item );
switch( command )
{
case UR_CHANGED:
/* If needed, create a copy of item, and put in undo list
* in the picker, as link
* If this link is not null, the copy is already done
*/
if( commandToUndo->GetPickedItemLink( ii ) == NULL )
{
EDA_ITEM* cloned = item->Clone();
commandToUndo->SetPickedItemLink( cloned, ii );
}
break;
case UR_MOVED:
case UR_ROTATED:
case UR_ROTATED_CLOCKWISE:
case UR_FLIPPED:
case UR_NEW:
case UR_DELETED:
break;
default:
{
wxString msg;
msg.Printf( wxT( "SaveCopyInUndoList() error (unknown code %X)" ), command );
wxMessageBox( msg );
}
break;
}
}
if( commandToUndo->GetCount() )
{
/* Save the copy in undo list */
GetScreen()->PushCommandToUndoList( commandToUndo );
/* Clear redo list, because after a new command one cannot redo a command */
GetScreen()->ClearUndoORRedoList( GetScreen()->m_RedoList );
}
else // Should not occur
{
delete commandToUndo;
}
}
void PNS_ROUTER::CommitRouting( PNS_NODE* aNode )
{
PNS_NODE::ITEM_VECTOR removed, added;
aNode->GetUpdatedItems( removed, added );
for( unsigned int i = 0; i < removed.size(); i++ )
{
BOARD_CONNECTED_ITEM* parent = removed[i]->Parent();
if( parent )
{
m_view->Remove( parent );
m_board->Remove( parent );
m_undoBuffer.PushItem( ITEM_PICKER( parent, UR_DELETED ) );
}
}
for( PNS_ITEM* item : added )
{
BOARD_CONNECTED_ITEM* newBI = NULL;
switch( item->Kind() )
{
case PNS_ITEM::SEGMENT:
{
PNS_SEGMENT* seg = static_cast<PNS_SEGMENT*>( item );
TRACK* track = new TRACK( m_board );
const SEG& s = seg->Seg();
track->SetStart( wxPoint( s.A.x, s.A.y ) );
track->SetEnd( wxPoint( s.B.x, s.B.y ) );
track->SetWidth( seg->Width() );
track->SetLayer( ToLAYER_ID( seg->Layers().Start() ) );
track->SetNetCode( seg->Net() > 0 ? seg->Net() : 0 );
newBI = track;
break;
}
case PNS_ITEM::VIA:
{
VIA* via_board = new VIA( m_board );
PNS_VIA* via = static_cast<PNS_VIA*>( item );
via_board->SetPosition( wxPoint( via->Pos().x, via->Pos().y ) );
via_board->SetWidth( via->Diameter() );
via_board->SetDrill( via->Drill() );
via_board->SetNetCode( via->Net() > 0 ? via->Net() : 0 );
via_board->SetViaType( via->ViaType() ); // MUST be before SetLayerPair()
via_board->SetLayerPair( ToLAYER_ID( via->Layers().Start() ),
ToLAYER_ID( via->Layers().End() ) );
newBI = via_board;
break;
}
default:
break;
}
if( newBI )
{
item->SetParent( newBI );
newBI->ClearFlags();
m_view->Add( newBI );
m_board->Add( newBI );
m_undoBuffer.PushItem( ITEM_PICKER( newBI, UR_NEW ) );
newBI->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
m_board->GetRatsnest()->Recalculate();
m_world->Commit( aNode );
}
void BOARD_COMMIT::Push( const wxString& aMessage )
{
// Objects potentially interested in changes:
PICKED_ITEMS_LIST undoList;
KIGFX::VIEW* view = m_toolMgr->GetView();
BOARD* board = (BOARD*) m_toolMgr->GetModel();
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) m_toolMgr->GetEditFrame();
RN_DATA* ratsnest = board->GetRatsnest();
std::set<EDA_ITEM*> savedModules;
if( Empty() )
return;
for( COMMIT_LINE& ent : m_changes )
{
int changeType = ent.m_type & CHT_TYPE;
int changeFlags = ent.m_type & CHT_FLAGS;
BOARD_ITEM* boardItem = static_cast<BOARD_ITEM*>( ent.m_item );
// Module items need to be saved in the undo buffer before modification
if( m_editModules )
{
// Be sure that we are storing a module
if( ent.m_item->Type() != PCB_MODULE_T )
ent.m_item = ent.m_item->GetParent();
// We have not saved the module yet, so let's create an entry
if( savedModules.count( ent.m_item ) == 0 )
{
if( !ent.m_copy )
{
assert( changeType != CHT_MODIFY ); // too late to make a copy..
ent.m_copy = ent.m_item->Clone();
}
assert( ent.m_item->Type() == PCB_MODULE_T );
assert( ent.m_copy->Type() == PCB_MODULE_T );
ITEM_PICKER itemWrapper( ent.m_item, UR_CHANGED );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
frame->SaveCopyInUndoList( undoList, UR_CHANGED );
savedModules.insert( ent.m_item );
static_cast<MODULE*>( ent.m_item )->SetLastEditTime();
}
}
switch( changeType )
{
case CHT_ADD:
{
if( !m_editModules )
{
undoList.PushItem( ITEM_PICKER( boardItem, UR_NEW ) );
if( !( changeFlags & CHT_DONE ) )
board->Add( boardItem );
//ratsnest->Add( boardItem ); // TODO currently done by BOARD::Add()
if( boardItem->Type() == PCB_MODULE_T )
{
MODULE* mod = static_cast<MODULE*>( boardItem );
mod->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
}
}
else
{
// modules inside modules are not supported yet
assert( boardItem->Type() != PCB_MODULE_T );
if( !( changeFlags & CHT_DONE ) )
board->m_Modules->Add( boardItem );
}
view->Add( boardItem );
break;
}
case CHT_REMOVE:
{
if( !m_editModules )
{
undoList.PushItem( ITEM_PICKER( boardItem, UR_DELETED ) );
}
switch( boardItem->Type() )
{
// Module items
case PCB_PAD_T:
case PCB_MODULE_EDGE_T:
case PCB_MODULE_TEXT_T:
{
// Do not allow footprint text removal when not editing a module
if( !m_editModules )
break;
bool remove = true;
if( boardItem->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( boardItem );
switch( text->GetType() )
{
case TEXTE_MODULE::TEXT_is_REFERENCE:
//DisplayError( frame, _( "Cannot delete component reference." ) );
remove = false;
break;
case TEXTE_MODULE::TEXT_is_VALUE:
//DisplayError( frame, _( "Cannot delete component value." ) );
remove = false;
break;
case TEXTE_MODULE::TEXT_is_DIVERS: // suppress warnings
break;
default:
assert( false );
break;
}
}
if( remove )
{
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
{
MODULE* module = static_cast<MODULE*>( boardItem->GetParent() );
assert( module && module->Type() == PCB_MODULE_T );
module->Delete( boardItem );
}
board->m_Status_Pcb = 0; // it is done in the legacy view (ratsnest perhaps?)
}
break;
}
// Board items
case PCB_LINE_T: // a segment not on copper layers
case PCB_TEXT_T: // a text on a layer
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
case PCB_DIMENSION_T: // a dimension (graphic item)
case PCB_TARGET_T: // a target (graphic item)
case PCB_MARKER_T: // a marker used to show something
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
case PCB_ZONE_AREA_T:
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
board->Remove( boardItem );
//ratsnest->Remove( boardItem ); // currently done by BOARD::Remove()
break;
case PCB_MODULE_T:
{
// There are no modules inside a module yet
assert( !m_editModules );
MODULE* module = static_cast<MODULE*>( boardItem );
module->ClearFlags();
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
view->Remove( module );
if( !( changeFlags & CHT_DONE ) )
board->Remove( module );
// Clear flags to indicate, that the ratsnest, list of nets & pads are not valid anymore
board->m_Status_Pcb = 0;
}
break;
default: // other types do not need to (or should not) be handled
assert( false );
break;
}
break;
}
case CHT_MODIFY:
{
if( !m_editModules )
{
ITEM_PICKER itemWrapper( boardItem, UR_CHANGED );
assert( ent.m_copy );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
}
boardItem->ViewUpdate( KIGFX::VIEW_ITEM::ALL );
ratsnest->Update( boardItem );
break;
}
default:
assert( false );
break;
}
}
if( !m_editModules )
frame->SaveCopyInUndoList( undoList, UR_UNSPECIFIED );
frame->OnModify();
ratsnest->Recalculate();
clear();
}
/**
* When the component table dialog is closed,
* work out if we need to save any changed.
* If so, capture those changes and push them to the undo stack.
*/
bool DIALOG_BOM_EDITOR::TransferDataFromWindow()
{
if( m_bom->HaveFieldsChanged() )
{
/**
* As we may be saving changes across multiple sheets,
* we need to first determine which changes need to be made to which sheet.
* To this end, we perform the following:
* 1. Save the "path" of the currently displayed sheet
* 2. Create a MAP of <SheetPath:ChangeList> changes that need to be made
* 3. Push UNDO actions to appropriate sheets
* 4. Perform all the update actions
* 5. Reset the view to the current sheet
*/
auto currentSheet = m_parent->GetCurrentSheet();
//! Create a map of changes required for each sheet
std::map<wxString, SheetUndoList> undoSheetMap;
// List of components that have changed
auto changed = m_bom->GetChangedComponents();
ITEM_PICKER picker;
// Iterate through each of the components that were changed
for( auto ref : changed )
{
// Extract the SCH_COMPONENT* object
auto cmp = ref.GetComp();
wxString path = ref.GetSheetPath().Path();
// Push the component into the picker list
picker = ITEM_PICKER( cmp, UR_CHANGED );
picker.SetFlags( cmp->GetFlags() );
/*
* If there is not currently an undo list for the given sheet,
* create an empty one
*/
if( undoSheetMap.count( path ) == 0 )
{
SheetUndoList newList;
newList.path = ref.GetSheetPath();
undoSheetMap[path] = newList;
}
auto& pickerList = undoSheetMap[path];
pickerList.items.PushItem( picker );
}
// Iterate through each sheet that needs updating
for( auto it = undoSheetMap.begin(); it != undoSheetMap.end(); ++it )
{
auto undo = it->second;
m_parent->SetCurrentSheet( undo.path );
m_parent->SaveCopyInUndoList( undo.items, UR_CHANGED );
m_parent->OnModify();
}
// Make all component changes
m_bom->ApplyFieldChanges();
// Redraw the current sheet and mark as dirty
m_parent->Refresh();
m_parent->OnModify();
// Reset the view to where we left the user
m_parent->SetCurrentSheet(currentSheet);
}
return true;
}
