WSChannel* WSClientParser::CreateChannel(switch_core_session_t *session) {
	WSChannel *wsChannel = NULL;

	// 创建channel
//	switch_memory_pool_t *pool = switch_core_session_get_pool(session);
	wsChannel = (WSChannel *)switch_core_alloc(mpPool, sizeof(WSChannel));
	wsChannel->session = session;
	wsChannel->parser = this;
	wsChannel->uuid_str = switch_core_strdup(mpPool, switch_core_session_get_uuid(session));

	switch_log_printf(
			SWITCH_CHANNEL_UUID_LOG(this->GetUUID()),
			SWITCH_LOG_INFO,
			"WSClientParser::CreateChannel( "
			"this : %p, "
			"wsChannel : %p "
			") \n",
			this,
			wsChannel
			);

	if( InitChannel(wsChannel) ) {
		mpChannel = wsChannel;
	} else {
		DestroyChannel(wsChannel);
	}

	return wsChannel;
}
Example #2
0
int ClusterReceiver::open(void*)
{
	InitChannel();
	activate(THR_NEW_LWP,THR_NUM);

	return 0;
}
Example #3
0
struct ftlInfo *Initiation(struct ftlInfo *ftl){

	//struct parameter_value *parameters;

	printf("initiation start\n");

	LoadParameters(ftl);	
	InitChannel(ftl);
	InitDram(ftl);
	InitControl(ftl);
		
	return ftl;
}
Example #4
0
bool CGameWorld::initNet(TiXmlElement* pRoot)
{
	CORE("init:","initNet..");
	g_cfg.client_listen_ip = "localhost";
	g_cfg.client_listen_port = 0;//8888;
	g_cfg.unlogin_timeout = 60;
	g_cfg.local_login = true;
	g_cfg.c2r_interval = 500;
	g_cfg.r2c_interval = 250;
	g_cfg.cl_pre_buffer = 3;
	g_cfg.cl_max_buffer = 1;

	//read config
	CORE("init:","initNet read config..");
	if(!pRoot)
		return false;
	m_strListenIp="0.0.0.0";
	TiXmlElement* pEleCon = pRoot->FirstChildElement("ip");
	if (pEleCon)
	{
		m_strListenIp = pEleCon->GetText();
	}
	string strport="7200";
	TiXmlElement* pEleConPort = pRoot->FirstChildElement("port");
	if (pEleConPort)
	{
		strport = pEleConPort->GetText();
	}
	m_iListenPort = atol(strport.c_str());

	g_cfg.client_listen_ip = m_strListenIp;
	g_cfg.client_listen_port = m_iListenPort;
	//start listen
	CORE("init:","start listen(%s,%d)..",m_strListenIp.c_str(),m_iListenPort);
	if(!m_ClientListener.StartListen(m_strListenIp.c_str(),
		m_iListenPort,true))
	{
		CORE("¼àÌý¶Ë¿Úʧ°Ü: ","start listen ip=%s,port = %d",m_strListenIp.c_str(),m_iListenPort);
		return false;
	}
	else
	{
		CORE("¿ªÊ¼¼àÌý¶Ë¿Ú: ","start listen  ip=%s,port = %d",m_strListenIp.c_str(),m_iListenPort);
	}
	InitChannel();
	return true;
}
Example #5
0
int main(int argc, char **argv)
{
  float *Hydrograph = NULL;
  float ***MM5Input = NULL;
  float **PrecipLapseMap = NULL;
  float **PrismMap = NULL;
  unsigned char ***ShadowMap = NULL;
  float **SkyViewMap = NULL;
  float ***WindModel = NULL;
  int MaxStreamID, MaxRoadID;
  float SedDiams[NSEDSIZES];     /* Sediment particle diameters (mm) */
  clock_t start, finish1;
  double runtime = 0.0;
  int t = 0;
  float roadarea;
  time_t tloc;
  int flag;
  int i;
  int j;
  int x;						/* row counter */
  int y;						/* column counter */
  int shade_offset;				/* a fast way of handling arraay position given the number of mm5 input options */
  int NStats;					/* Number of meteorological stations */
  uchar ***MetWeights = NULL;	/* 3D array with weights for interpolating meteorological variables between the stations */

  int NGraphics;				/* number of graphics for X11 */
  int *which_graphics;			/* which graphics for X11 */
  char buffer[32];

  AGGREGATED Total = {			/* Total or average value of a  variable over the entire basin */
    {0.0, NULL, NULL, NULL, NULL, 0.0},												/* EVAPPIX */
    {0.0, 0.0, 0.0, 0.0, 0.0, NULL, NULL, 0.0, 0, 0.0},								/* PRECIPPIX */
    {{0.0, 0.0}, {0.0, 0.0}, {0.0, 0.0}, 0.0, 0.0, 0.0},							/* PIXRAD */
    {0.0, 0.0},																		/* RADCLASSPIX */
    {0.0, 0.0, 0, NULL, NULL, 0.0, 0, 0.0, 0.0, 0.0, 0.0, NULL, 
	NULL, NULL, NULL, NULL, NULL, 0.0},												/* ROADSTRUCT*/
    {0, 0, 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0},		/* SNOWPIX */
    {0, 0.0, NULL, NULL, NULL, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0,
     0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0},			/*SOILPIX */
    { 0.0, 0.0, 0.0, 0.0, 0.0},														/*SEDPIX */
    { 0.0, 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0},							/*FINEPIX */
    0.0, 0.0, 0.0, 0.0, 0.0, 0l, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0
  };
  CHANNEL ChannelData = {NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, 
  NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
  NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
  NULL, NULL, NULL, NULL};
  DUMPSTRUCT Dump;
  EVAPPIX **EvapMap = NULL;
  INPUTFILES InFiles;
  LAYER Soil;
  LAYER Veg;
  LISTPTR Input = NULL;			/* Linked list with input strings */
  MAPSIZE Map;					/* Size and location of model area */
  MAPSIZE Radar;				/* Size and location of area covered by precipitation radar */
  MAPSIZE MM5Map;				/* Size and location of area covered by MM5 input files */
  METLOCATION *Stat = NULL;
  OPTIONSTRUCT Options;			/* Structure with information which program options to follow */
  PIXMET LocalMet;				/* Meteorological conditions for current pixel */
  FINEPIX ***FineMap	= NULL;
  PRECIPPIX **PrecipMap = NULL;
  RADARPIX **RadarMap	= NULL;
  RADCLASSPIX **RadMap	= NULL;
  PIXRAD **RadiationMap = NULL;
  ROADSTRUCT **Network	= NULL;	/* 2D Array with channel information for each pixel */
  SNOWPIX **SnowMap		= NULL;
  MET_MAP_PIX **MetMap	= NULL;
  SNOWTABLE *SnowAlbedo = NULL;
  SOILPIX **SoilMap		= NULL;
  SEDPIX **SedMap		= NULL;
  SOILTABLE *SType	    = NULL;
  SEDTABLE *SedType		= NULL;
  SOLARGEOMETRY SolarGeo;		/* Geometry of Sun-Earth system (needed for INLINE radiation calculations */
  TIMESTRUCT Time;
  TOPOPIX **TopoMap = NULL;
  UNITHYDR **UnitHydrograph = NULL;
  UNITHYDRINFO HydrographInfo;	/* Information about unit hydrograph */
  VEGPIX **VegMap = NULL;
  VEGTABLE *VType = NULL;
  WATERBALANCE Mass =			/* parameter for mass balance calculations */
    { 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0,  
      0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 };

/*****************************************************************************
  Initialization Procedures 
*****************************************************************************/
  if (argc != 2) {
    fprintf(stderr, "\nUsage: %s inputfile\n\n", argv[0]);
    fprintf(stderr, "DHSVM uses two output streams: \n");
    fprintf(stderr, "Standard Out, for the majority of output \n");
    fprintf(stderr, "Standard Error, for the final mass balance \n");
    fprintf(stderr, "\nTo pipe output correctly to files: \n");
    fprintf(stderr, "(cmd > f1) >& f2 \n");
    fprintf(stderr, "where f1 is stdout_file and f2 is stderror_file\n");
    exit(EXIT_FAILURE);
  }

  sprintf(commandline, "%s %s", argv[0], argv[1]);
  printf("%s \n", commandline);
  fprintf(stderr, "%s \n", commandline);
  strcpy(InFiles.Const, argv[1]);

  printf("\nRunning DHSVM %s\n", version);
  printf("\nSTARTING INITIALIZATION PROCEDURES\n\n");

  /* Start recording time */
  start = clock();

  ReadInitFile(InFiles.Const, &Input);
  InitConstants(Input, &Options, &Map, &SolarGeo, &Time);

  InitFileIO(Options.FileFormat);
  InitTables(Time.NDaySteps, Input, &Options, &SType, &Soil, &VType, &Veg,
	     &SnowAlbedo);

  InitTerrainMaps(Input, &Options, &Map, &Soil, &TopoMap, &SoilMap, &VegMap);

  CheckOut(Options.CanopyRadAtt, Veg, Soil, VType, SType, &Map, TopoMap, 
	   VegMap, SoilMap);

  if (Options.HasNetwork)
    InitChannel(Input, &Map, Time.Dt, &ChannelData, SoilMap, &MaxStreamID, &MaxRoadID, &Options);
  else if (Options.Extent != POINT)
    InitUnitHydrograph(Input, &Map, TopoMap, &UnitHydrograph,
		       &Hydrograph, &HydrographInfo);
 
  InitNetwork(Map.NY, Map.NX, Map.DX, Map.DY, TopoMap, SoilMap, 
	      VegMap, VType, &Network, &ChannelData, Veg, &Options);

  InitMetSources(Input, &Options, &Map, Soil.MaxLayers, &Time,
		 &InFiles, &NStats, &Stat, &Radar, &MM5Map);

  /* the following piece of code is for the UW PRISM project */
  /* for real-time verification of SWE at Snotel sites */
  /* Other users, set OPTION.SNOTEL to FALSE, or use TRUE with caution */

  if (Options.Snotel == TRUE && Options.Outside == FALSE) {
    printf
      ("Warning: All met stations locations are being set to the vegetation class GLACIER\n");
    printf
      ("Warning: This requires that you have such a vegetation class in your vegetation table\n");
    printf("To disable this feature set Snotel OPTION to FALSE\n");
    for (i = 0; i < NStats; i++) {
      printf("veg type for station %d is %d ", i,
	     VegMap[Stat[i].Loc.N][Stat[i].Loc.E].Veg);
      for (j = 0; j < Veg.NTypes; j++) {
	    if (VType[j].Index == GLACIER) {
	      VegMap[Stat[i].Loc.N][Stat[i].Loc.E].Veg = j;
		  break;
		}
      }
      if (j == Veg.NTypes) {	/* glacier class not found */
	    ReportError("MainDHSVM", 62);
	  }
      printf("setting to glacier type (assumed bare class): %d\n", j);
    }
  }

  InitMetMaps(Time.NDaySteps, &Map, &Radar, &Options, InFiles.WindMapPath,
	      InFiles.PrecipLapseFile, &PrecipLapseMap, &PrismMap,
	      &ShadowMap, &SkyViewMap, &EvapMap, &PrecipMap,
	      &RadarMap, &RadMap, SoilMap, &Soil, VegMap, &Veg, TopoMap,
	      &MM5Input, &WindModel);

  InitInterpolationWeights(&Map, &Options, TopoMap, &MetWeights, Stat, NStats);

  InitDump(Input, &Options, &Map, Soil.MaxLayers, Veg.MaxLayers, Time.Dt,
	   TopoMap, &Dump, &NGraphics, &which_graphics);

  if (Options.HasNetwork == TRUE) {
    InitChannelDump(&Options, &ChannelData, Dump.Path);
    ReadChannelState(Dump.InitStatePath, &(Time.Start), ChannelData.streams);
  }

  InitSnowMap(&Map, &SnowMap);
  InitAggregated(Veg.MaxLayers, Soil.MaxLayers, &Total);

  InitModelState(&(Time.Start), &Map, &Options, PrecipMap, SnowMap, SoilMap,
		 Soil, SType, VegMap, Veg, VType, Dump.InitStatePath,
		 SnowAlbedo, TopoMap, Network, &HydrographInfo, Hydrograph);

  InitNewMonth(&Time, &Options, &Map, TopoMap, PrismMap, ShadowMap,
	       RadMap, &InFiles, Veg.NTypes, VType, NStats, Stat, 
	       Dump.InitStatePath);

  InitNewDay(Time.Current.JDay, &SolarGeo);

  if (NGraphics > 0) {
    printf("Initialzing X11 display and graphics \n");
    InitXGraphics(argc, argv, Map.NY, Map.NX, NGraphics, &MetMap);
  }

  shade_offset = FALSE;
  if (Options.Shading == TRUE)
    shade_offset = TRUE;

  /* Done with initialization, delete the list with input strings */
  DeleteList(Input);

  /*****************************************************************************
  Sediment Initialization Procedures 
  *****************************************************************************/
  if(Options.Sediment) {
     time (&tloc);
     srand (tloc);
  /* Randomize Random Generator */
 
  /* Commenting the line above and uncommenting the line below 
     allows for the comparison of scenarios. */
  /*  srand48 (0);  */
    printf("\nSTARTING SEDIMENT INITIALIZATION PROCEDURES\n\n");

    ReadInitFile(Options.SedFile, &Input);

    InitParameters(Input, &Options, &Map, &Network, &ChannelData, TopoMap,
		   &Time, SedDiams);

    InitSedimentTables(Time.NDaySteps, Input, &SedType, &SType, &VType, &Soil, &Veg);

    InitFineMaps(Input, &Options, &Map, &Soil, &TopoMap, &SoilMap, 
		  &FineMap);

    if (Options.HasNetwork){ 
      printf("Initializing channel sediment\n\n");
      InitChannelSedimentDump(&ChannelData, Dump.Path, Options.ChannelRouting); 
      InitChannelSediment(ChannelData.streams, &Total);
      InitChannelSediment(ChannelData.roads, &Total);
    }

    InitSedMap( &Map, &SedMap);

    /* Done with initialization, delete the list with input strings */
    DeleteList(Input);
  }

  /* setup for mass balance calculations */
  Aggregate(&Map, &Options, TopoMap, &Soil, &Veg, VegMap, EvapMap, PrecipMap,
	      RadMap, SnowMap, SoilMap, &Total, VType, Network, SedMap, FineMap,
	      &ChannelData, &roadarea);

  Mass.StartWaterStorage =
    Total.Soil.IExcess + Total.CanopyWater + Total.SoilWater + Total.Snow.Swq +
    Total.Soil.SatFlow;
  Mass.OldWaterStorage = Mass.StartWaterStorage;

  if (Options.Sediment) {
    Mass.StartChannelSedimentStorage = Total.ChannelSedimentStorage;
    Mass.LastChannelSedimentStorage = Mass.StartChannelSedimentStorage;
  }

  /* computes the number of grid cell contributing to one segment */
  if (Options.StreamTemp) 
	Init_segment_ncell(TopoMap, ChannelData.stream_map, Map.NY, Map.NX, ChannelData.streams);

/*****************************************************************************
  Perform Calculations 
*****************************************************************************/
  while (Before(&(Time.Current), &(Time.End)) ||
	 IsEqualTime(&(Time.Current), &(Time.End))) {
    ResetAggregate(&Soil, &Veg, &Total, &Options);

    if (IsNewMonth(&(Time.Current), Time.Dt))
      InitNewMonth(&Time, &Options, &Map, TopoMap, PrismMap, ShadowMap,
		   RadMap, &InFiles, Veg.NTypes, VType, NStats, Stat, 
		   Dump.InitStatePath);

    if (IsNewDay(Time.DayStep)) {
      InitNewDay(Time.Current.JDay, &SolarGeo);
      PrintDate(&(Time.Current), stdout);
      printf("\n");
    }

    /* determine surface erosion and routing scheme */
    SedimentFlag(&Options, &Time); 

    InitNewStep(&InFiles, &Map, &Time, Soil.MaxLayers, &Options, NStats, Stat,
		InFiles.RadarFile, &Radar, RadarMap, &SolarGeo, TopoMap, RadMap,
        SoilMap, MM5Input, WindModel, &MM5Map);

    /* initialize channel/road networks for time step */
    if (Options.HasNetwork) {
      channel_step_initialize_network(ChannelData.streams);
      channel_step_initialize_network(ChannelData.roads);
    }

    for (y = 0; y < Map.NY; y++) {
      for (x = 0; x < Map.NX; x++) {
	    if (INBASIN(TopoMap[y][x].Mask)) {
		  if (Options.Shading)
	        LocalMet =
	        MakeLocalMetData(y, x, &Map, Time.DayStep, &Options, NStats,
			       Stat, MetWeights[y][x], TopoMap[y][x].Dem,
			       &(RadMap[y][x]), &(PrecipMap[y][x]), &Radar,
			       RadarMap, PrismMap, &(SnowMap[y][x]),
			       SnowAlbedo, MM5Input, WindModel, PrecipLapseMap,
			       &MetMap, NGraphics, Time.Current.Month,
			       SkyViewMap[y][x], ShadowMap[Time.DayStep][y][x],
			       SolarGeo.SunMax, SolarGeo.SineSolarAltitude);
		  else
	        LocalMet =
	        MakeLocalMetData(y, x, &Map, Time.DayStep, &Options, NStats,
			       Stat, MetWeights[y][x], TopoMap[y][x].Dem,
			       &(RadMap[y][x]), &(PrecipMap[y][x]), &Radar,
			       RadarMap, PrismMap, &(SnowMap[y][x]),
			       SnowAlbedo, MM5Input, WindModel, PrecipLapseMap,
			       &MetMap, NGraphics, Time.Current.Month, 0.0,
			       0.0, SolarGeo.SunMax,
			       SolarGeo.SineSolarAltitude);
		  
		  for (i = 0; i < Soil.MaxLayers; i++) {
	        if (Options.HeatFlux == TRUE) {
	          if (Options.MM5 == TRUE)
		        SoilMap[y][x].Temp[i] =
				MM5Input[shade_offset + i + N_MM5_MAPS][y][x];
			  else
		        SoilMap[y][x].Temp[i] = Stat[0].Data.Tsoil[i];
			}
	        else
	          SoilMap[y][x].Temp[i] = LocalMet.Tair;
		  }
		  
		  MassEnergyBalance(&Options, y, x, SolarGeo.SineSolarAltitude, Map.DX, Map.DY, 
			    Time.Dt, Options.HeatFlux, Options.CanopyRadAtt, Options.RoadRouting, 
			    Options.Infiltration, Veg.MaxLayers, &LocalMet, &(Network[y][x]), 
			    &(PrecipMap[y][x]), &(VType[VegMap[y][x].Veg-1]), &(VegMap[y][x]),
			    &(SType[SoilMap[y][x].Soil-1]), &(SoilMap[y][x]), &(SnowMap[y][x]), 
				&(EvapMap[y][x]), &(Total.Rad), &ChannelData, SkyViewMap);
		 
		  PrecipMap[y][x].SumPrecip += PrecipMap[y][x].Precip;
		}
	  }
    }

	/* Average all RBM inputs over each segment */
	if (Options.StreamTemp) {
	  channel_grid_avg(ChannelData.streams);
	}

 #ifndef SNOW_ONLY

    /* set sediment inflows to zero - they are incremented elsewhere */
    if ((Options.HasNetwork) && (Options.Sediment)){ 
      InitChannelSedInflow(ChannelData.streams);
      InitChannelSedInflow(ChannelData.roads);
	}
    
    RouteSubSurface(Time.Dt, &Map, TopoMap, VType, VegMap, Network,
		    SType, SoilMap, &ChannelData, &Time, &Options, Dump.Path,
		    SedMap, FineMap, SedType, MaxStreamID, SnowMap);

    if (Options.HasNetwork)
      RouteChannel(&ChannelData, &Time, &Map, TopoMap, SoilMap, &Total, 
		   &Options, Network, SType, PrecipMap, SedMap,
		   LocalMet.Tair, LocalMet.Rh, SedDiams);

    /* Sediment Routing in Channel and output to sediment files */
    if ((Options.HasNetwork) && (Options.Sediment)){
      SPrintDate(&(Time.Current), buffer);
      flag = IsEqualTime(&(Time.Current), &(Time.Start));

      if (Options.ChannelRouting){
	    if (ChannelData.roads != NULL) {
	      RouteChannelSediment(ChannelData.roads, Time, &Dump, &Total, SedDiams);
	      channel_save_sed_outflow_text(buffer, ChannelData.roads,
					ChannelData.sedroadout,
					ChannelData.sedroadflowout, flag);
		  RouteCulvertSediment(&ChannelData, &Map, TopoMap, SedMap, 
			       &Total, SedDiams);
		}
	    RouteChannelSediment(ChannelData.streams, Time, &Dump, &Total, SedDiams);
 	    channel_save_sed_outflow_text(buffer, ChannelData.streams,
				      ChannelData.sedstreamout,
				      ChannelData.sedstreamflowout, flag);
	  }
      else {
	    if (ChannelData.roads != NULL) {
			channel_save_sed_inflow_text(buffer, ChannelData.roads,
			ChannelData.sedroadinflow, SedDiams,flag);
		}
	    channel_save_sed_inflow_text(buffer, ChannelData.streams,
			ChannelData.sedstreaminflow, SedDiams,flag);
      }
      SaveChannelSedInflow(ChannelData.roads, &Total);
      SaveChannelSedInflow(ChannelData.streams, &Total);
    }
    
    if (Options.Extent == BASIN)
      RouteSurface(&Map, &Time, TopoMap, SoilMap, &Options,
		   UnitHydrograph, &HydrographInfo, Hydrograph,
		   &Dump, VegMap, VType, SType, &ChannelData, SedMap,
		   PrecipMap, SedType, LocalMet.Tair, LocalMet.Rh, SedDiams);

#endif

    if (NGraphics > 0)
      draw(&(Time.Current), IsEqualTime(&(Time.Current), &(Time.Start)),
	   Time.DayStep, &Map, NGraphics, which_graphics, VType,
	   SType, SnowMap, SoilMap, SedMap, FineMap, VegMap, TopoMap, PrecipMap,
	   PrismMap, SkyViewMap, ShadowMap, EvapMap, RadMap, MetMap, Network,
	   &Options);
    
    Aggregate(&Map, &Options, TopoMap, &Soil, &Veg, VegMap, EvapMap, PrecipMap,
	      RadMap, SnowMap, SoilMap, &Total, VType, Network, SedMap, FineMap,
	      &ChannelData, &roadarea);
    
    MassBalance(&(Time.Current), &(Dump.Balance), &(Dump.SedBalance), &Total, 
		&Mass, &Options);

    ExecDump(&Map, &(Time.Current), &(Time.Start), &Options, &Dump, TopoMap,
	     EvapMap, RadiationMap, PrecipMap, RadMap, SnowMap, MetMap, VegMap, &Veg, 
		 SoilMap, SedMap, Network, &ChannelData, FineMap, &Soil, &Total, 
		 &HydrographInfo,Hydrograph);
	
    IncreaseTime(&Time);
	t += 1;
  }

  ExecDump(&Map, &(Time.Current), &(Time.Start), &Options, &Dump, TopoMap,
	   EvapMap, RadiationMap, PrecipMap, RadMap, SnowMap, MetMap, VegMap, &Veg, SoilMap,
	   SedMap, Network, &ChannelData, FineMap, &Soil, &Total, &HydrographInfo, Hydrograph);

  FinalMassBalance(&(Dump.FinalBalance), &Total, &Mass, &Options, roadarea);

  /*printf("\nSTARTING CLEANUP\n\n");
  cleanup(&Dump, &ChannelData, &Options);*/
  printf("\nEND OF MODEL RUN\n\n");

  /* record the run time at the end of each time loop */
  finish1 = clock ();
  runtime = (finish1-start)/CLOCKS_PER_SEC;
  printf("***********************************************************************************");
  printf("\nRuntime Summary:\n");
  printf("%6.2f hours elapsed for the simulation period of %d hours (%.1f days) \n", 
	  runtime/3600, t*Time.Dt/3600, (float)t*Time.Dt/3600/24);

  return EXIT_SUCCESS;
}
Example #6
0
/**
 * Construct an analog channel on the default module.
 * 
 * @param channel The channel number to represent.
 */
AnalogChannel::AnalogChannel(UINT32 channel)
{
	InitChannel(GetDefaultAnalogModule(), channel);
}
Example #7
0
/**
 * Construct an analog channel on a specified module.
 * 
 * @param slot The slot that the analog module is plugged into.
 * @param channel The channel number to represent.
 */
AnalogChannel::AnalogChannel(UINT32 slot, UINT32 channel)
{
	InitChannel(slot, channel);
}
Example #8
0
int main(int argc, char **argv)
{
  float *Hydrograph = NULL;
  float ***MM5Input = NULL;
  float **PrecipLapseMap = NULL;
  float **PrismMap = NULL;
  unsigned char ***ShadowMap = NULL;
  float **SkyViewMap = NULL;
  float ***WindModel = NULL;
  /* Glacier Model Variable */
  double  dt_year;
  double  year_min;
  double  year_max;
  int MaxStreamID, MaxRoadID;
  clock_t start, finish1;
  double runtime = 0.0;
  int t = 0;
  float roadarea;
  int i;
  int j;
  int x;						/* row counter */
  int y;						/* column counter */
  int shade_offset;				/* a fast way of handling arraay position given the number of mm5 input options */
  int NStats;					/* Number of meteorological stations */
  uchar ***MetWeights = NULL;	/* 3D array with weights for interpolating meteorological variables between the stations */

  int NGraphics;				/* number of graphics for X11 */
  int *which_graphics;			/* which graphics for X11 */

  AGGREGATED Total = {			/* Total or average value of a  variable over the entire basin */
    {0.0, NULL, NULL, NULL, NULL, 0.0},												/* EVAPPIX */
    {0.0, 0.0, 0.0, 0.0, 0.0, NULL, NULL, 0.0, 0, 0.0},								/* PRECIPPIX */
    {{0.0, 0.0}, {0.0, 0.0}, {0.0, 0.0}, 0.0, {0.0, 0.0}, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 },
                                                                                    /* PIXRAD */
    {0.0, 0.0, 0, NULL, NULL, 0.0, 0, 0.0, 0.0, 0.0, 0.0, NULL, NULL},				/* ROADSTRUCT*/
    {0, 0, 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0},		/* SNOWPIX */
    {0, 0.0, NULL, NULL, NULL, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0,
    0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0},			                /* SOILPIX */
    0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0l, 0.0, 0.0
  };
  CHANNEL ChannelData = {NULL, NULL, NULL, NULL, NULL, NULL, NULL, 
  NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
  NULL, NULL, NULL, NULL, NULL, NULL};
  DUMPSTRUCT Dump;
  EVAPPIX **EvapMap = NULL;
  INPUTFILES InFiles;
  LAYER Soil;
  LAYER Veg;
  LISTPTR Input = NULL;			/* Linked list with input strings */
  MAPSIZE Map;					/* Size and location of model area */
  MAPSIZE Radar;				/* Size and location of area covered by precipitation radar */
  MAPSIZE MM5Map;				/* Size and location of area covered by MM5 input files */
  GRID Grid;
  METLOCATION *Stat = NULL;
  OPTIONSTRUCT Options;			/* Structure with information which program options to follow */
  PIXMET LocalMet;				/* Meteorological conditions for current pixel */
  PRECIPPIX **PrecipMap = NULL;
  RADARPIX **RadarMap	= NULL;
  PIXRAD **RadiationMap = NULL;
  ROADSTRUCT **Network	= NULL;	/* 2D Array with channel information for each pixel */
  SNOWPIX **SnowMap		= NULL;
  GLPIX **GlacierMap = NULL; /* glacier model*/
  MET_MAP_PIX **MetMap	= NULL;
  SNOWTABLE *SnowAlbedo = NULL;
  SOILPIX **SoilMap		= NULL;
  SOILTABLE *SType	    = NULL;
  SOLARGEOMETRY SolarGeo;		/* Geometry of Sun-Earth system (needed for INLINE radiation calculations */
  TIMESTRUCT Time;
  TOPOPIX **TopoMap = NULL;
  UNITHYDR **UnitHydrograph = NULL;
  UNITHYDRINFO HydrographInfo;	/* Information about unit hydrograph */
  VEGPIX **VegMap = NULL;
  VEGTABLE *VType = NULL;
  WATERBALANCE Mass =			/* parameter for mass balance calculations */
    { 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 };

/*****************************************************************************
  Initialization Procedures 
*****************************************************************************/
  if (argc != 2) {
    fprintf(stderr, "\nUsage: %s inputfile\n\n", argv[0]);
    fprintf(stderr, "DHSVM uses two output streams: \n");
    fprintf(stderr, "Standard Out, for the majority of output \n");
    fprintf(stderr, "Standard Error, for the final mass balance \n");
    fprintf(stderr, "\nTo pipe output correctly to files: \n");
    fprintf(stderr, "(cmd > f1) >& f2 \n");
    fprintf(stderr, "where f1 is stdout_file and f2 is stderror_file\n");
    exit(EXIT_FAILURE);
  }

  sprintf(commandline, "%s %s", argv[0], argv[1]);
  printf("%s \n", commandline);
  fprintf(stderr, "%s \n", commandline);
  strcpy(InFiles.Const, argv[1]);

  printf("\nRunning DHSVM %s\n", version);
  printf("\nSTARTING INITIALIZATION PROCEDURES\n\n");

  /* Start recording time */
  start = clock();

  ReadInitFile(InFiles.Const, &Input);
  InitConstants(Input, &Options, &Map, &SolarGeo, &Time);

  InitFileIO(Options.FileFormat);
  InitTables(Time.NDaySteps, Input, &Options, &SType, &Soil, &VType, &Veg,
	     &SnowAlbedo);
  InitGlacierMap(&Map, &GlacierMap); /*glacier model*/
  InitTerrainMaps(Input, &Options, &Map, &Soil, &TopoMap, &SoilMap, &VegMap, &GlacierMap);
  
  CheckOut(&Options, Veg, Soil, VType, SType, &Map, TopoMap, VegMap, SoilMap);

  if (Options.HasNetwork)
    InitChannel(Input, &Map, Time.Dt, &ChannelData, SoilMap, &MaxStreamID, &MaxRoadID, &Options);
  else if (Options.Extent != POINT)
    InitUnitHydrograph(Input, &Map, TopoMap, &UnitHydrograph,
		       &Hydrograph, &HydrographInfo);
 
  InitNetwork(Map.NY, Map.NX, Map.DX, Map.DY, TopoMap, SoilMap, 
	      VegMap, VType, &Network, &ChannelData, Veg, &Options);

  InitMetSources(Input, &Options, &Map, TopoMap, Soil.MaxLayers, &Time,
		 &InFiles, &NStats, &Stat, &Radar, &MM5Map, &Grid);

  /* the following piece of code is for the UW PRISM project */
  /* for real-time verification of SWE at Snotel sites */
  /* Other users, set OPTION.SNOTEL to FALSE, or use TRUE with caution */

  if (Options.Snotel == TRUE && Options.Outside == FALSE) {
    printf
      ("Warning: All met stations locations are being set to the vegetation class GLACIER\n");
    printf
      ("Warning: This requires that you have such a vegetation class in your vegetation table\n");
    printf("To disable this feature set Snotel OPTION to FALSE\n");
    for (i = 0; i < NStats; i++) {
      printf("veg type for station %d is %d ", i,
	     VegMap[Stat[i].Loc.N][Stat[i].Loc.E].Veg);
      for (j = 0; j < Veg.NTypes; j++) {
	    if (VType[j].Index == GLACIER) {
	      VegMap[Stat[i].Loc.N][Stat[i].Loc.E].Veg = j;
		  break;
		}
      }
      if (j == Veg.NTypes) {	/* glacier class not found */
	    ReportError("MainDHSVM", 62);
	  }
      printf("setting to glacier type (assumed bare class): %d\n", j);
    }
  }

  InitMetMaps(Time.NDaySteps, &Map, &Radar, &Options, InFiles.WindMapPath,
	      InFiles.PrecipLapseFile, &PrecipLapseMap, &PrismMap,
	      &ShadowMap, &SkyViewMap, &EvapMap, &PrecipMap,
	      &RadarMap, &RadiationMap, SoilMap, &Soil, VegMap, &Veg, TopoMap,
	      &MM5Input, &WindModel);

  InitInterpolationWeights(&Map, &Options, TopoMap, &MetWeights, Stat, NStats);

  InitDump(Input, &Options, &Map, Soil.MaxLayers, Veg.MaxLayers, Time.Dt,
	   TopoMap, &Dump, &NGraphics, &which_graphics);

  if (Options.HasNetwork == TRUE) {
    InitChannelDump(&Options, &ChannelData, Dump.Path);
    ReadChannelState(Dump.InitStatePath, &(Time.Start), ChannelData.streams);
	if (Options.StreamTemp && Options.CanopyShading)
	  InitChannelRVeg(&Time, ChannelData.streams);
  }

  InitSnowMap(&Map, &SnowMap);
  InitAggregated(Veg.MaxLayers, Soil.MaxLayers, &Total);

  InitModelState(&(Time.Start), &Map, &Options, PrecipMap, SnowMap, SoilMap,
		 Soil, SType, VegMap, Veg, VType, Dump.InitStatePath,
		 SnowAlbedo, TopoMap, Network, &HydrographInfo, Hydrograph, &Total, GlacierMap);

#ifdef HAVE_GLACIER
/* Glacier Model is run independently to "spinup" glacier ice state over 1000 years */
  if (Options.Glacier == GLSPINUP){
   dt_year  = 1;
   year_min = 0;
   year_max = 1000;
   printf("Glacier model spin up run for %f years\n", year_max);
   main_spinup(&Map, TopoMap, SnowMap,GlacierMap, dt_year,year_min,year_max, 
   &(Time.Current), &Dump, &Options);
   return EXIT_SUCCESS;
  }
#endif

  InitNewMonth(&Time, &Options, &Map, TopoMap, PrismMap, ShadowMap,
	       &InFiles, Veg.NTypes, VType, NStats, Stat, Dump.InitStatePath);

  InitNewDay(Time.Current.JDay, &SolarGeo);

  if (NGraphics > 0) {
    printf("Initialzing X11 display and graphics \n");
    InitXGraphics(argc, argv, Map.NY, Map.NX, NGraphics, &MetMap);
  }

  shade_offset = FALSE;
  if (Options.Shading == TRUE)
    shade_offset = TRUE;

  /* Done with initialization, delete the list with input strings */
  DeleteList(Input);

  /* setup for mass balance calculations */
  Aggregate(&Map, &Options, TopoMap, &Soil, &Veg, VegMap, EvapMap, PrecipMap,
	      RadiationMap, SnowMap, SoilMap, &Total, VType, Network, &ChannelData, &roadarea);

  Mass.StartWaterStorage =
    Total.Soil.IExcess + Total.CanopyWater + Total.SoilWater + Total.Snow.Swq +
    Total.Soil.SatFlow + Total.Snow.Iwq + Total.Snow.IceRemoved;
  Mass.OldWaterStorage = Mass.StartWaterStorage;

  /* computes the number of grid cell contributing to one segment */
  if (Options.StreamTemp) 
	Init_segment_ncell(TopoMap, ChannelData.stream_map, Map.NY, Map.NX, ChannelData.streams);

/*****************************************************************************
  Perform Calculations 
*****************************************************************************/
  while (Before(&(Time.Current), &(Time.End)) ||
	 IsEqualTime(&(Time.Current), &(Time.End))) {

    /* debug */
    if (Time.Current.Month == 5 && Time.Current.Day == 20 && Time.Current.Hour >= 9 && Time.Current.Hour <= 15)
      printf("stop here for a little\n");
    /* debug ends */

    /* reset aggregated variables */
    ResetAggregate(&Soil, &Veg, &Total, &Options);

    if (IsNewMonth(&(Time.Current), Time.Dt)){
      InitNewMonth(&Time, &Options, &Map, TopoMap, PrismMap, ShadowMap,
		   &InFiles, Veg.NTypes, VType, NStats, Stat, Dump.InitStatePath);
#ifdef HAVE_GLACIER
          /* Run the glacier model at the end of every month */
	  if (Options.Glacier == GLSTATIC || Options.Glacier == GLDYNAMIC){
            dt_year  = 1.0;
            year_min = 1.0;
            year_max = 1.0;
             if(Time.Current.Month == 10 && Time.Current.Day == 1){
            /* Calculate Equilibrium Line Altitude at end of Water Year (assumed Oct1) */
	    /* will need to be changed depending on geography define water year */
	     calc_ela(&Map, TopoMap,SnowMap,GlacierMap,&(Time.Current), &Dump);
	}

            main_gl(&Map, TopoMap, SnowMap,GlacierMap, dt_year,year_min,year_max,
	    &(Time.Current), &Dump,&Options);
            /*Use the next program to output balance information for indivdual glaciers */
            gl_massbalance(&Map, TopoMap, SnowMap,GlacierMap, dt_year,year_min,
	    year_max, &(Time.Current), &Dump);
	}
#endif
    }
    if (IsNewDay(Time.DayStep)) {
      InitNewDay(Time.Current.JDay, &SolarGeo);
      PrintDate(&(Time.Current), stdout);
      printf("\n");
    }

    InitNewStep(&InFiles, &Map, &Time, Soil.MaxLayers, &Options, NStats, Stat,
		InFiles.RadarFile, &Radar, RadarMap, &SolarGeo, TopoMap, 
        SoilMap, MM5Input, WindModel, &MM5Map);

    /* initialize channel/road networks for time step */
    if (Options.HasNetwork) {
      channel_step_initialize_network(ChannelData.streams);
      channel_step_initialize_network(ChannelData.roads);
    }

    for (y = 0; y < Map.NY; y++) {
      for (x = 0; x < Map.NX; x++) {
	    if (INBASIN(TopoMap[y][x].Mask)) {
		  if (Options.Shading)
	        LocalMet =
	        MakeLocalMetData(y, x, &Map, Time.DayStep, &Options, NStats,
			       Stat, MetWeights[y][x], TopoMap[y][x].Dem,
			       &(RadiationMap[y][x]), &(PrecipMap[y][x]), &Radar,
			       RadarMap, PrismMap, &(SnowMap[y][x]),
			       SnowAlbedo, MM5Input, WindModel, PrecipLapseMap,
			       &MetMap, NGraphics, Time.Current.Month,
			       SkyViewMap[y][x], ShadowMap[Time.DayStep][y][x],
			       SolarGeo.SunMax, SolarGeo.SineSolarAltitude);
		  else
	        LocalMet =
	        MakeLocalMetData(y, x, &Map, Time.DayStep, &Options, NStats,
			       Stat, MetWeights[y][x], TopoMap[y][x].Dem,
			       &(RadiationMap[y][x]), &(PrecipMap[y][x]), &Radar,
			       RadarMap, PrismMap, &(SnowMap[y][x]),
			       SnowAlbedo, MM5Input, WindModel, PrecipLapseMap,
			       &MetMap, NGraphics, Time.Current.Month, 0.0,
			       0.0, SolarGeo.SunMax,
			       SolarGeo.SineSolarAltitude);

		  /* get surface tempeature of each soil layer */
		  for (i = 0; i < Soil.MaxLayers; i++) {
	        if (Options.HeatFlux == TRUE) {
	          if (Options.MM5 == TRUE)
		        SoilMap[y][x].Temp[i] =
				MM5Input[shade_offset + i + N_MM5_MAPS][y][x];

              /* read tempeature of each soil layer from met station input */
			  else
		        SoilMap[y][x].Temp[i] = Stat[0].Data.Tsoil[i];
			}
            /* if heat flux option is turned off, soil temperature of all 3 layers 
            is taken equal to air tempeature */
	        else
	          SoilMap[y][x].Temp[i] = LocalMet.Tair;
		  }
		  
		  MassEnergyBalance(&Options, y, x, SolarGeo.SineSolarAltitude, Map.DX, Map.DY, 
			    Time.Dt, Options.HeatFlux, Options.CanopyRadAtt, Options.Infiltration, 
				Veg.MaxLayers, &LocalMet, &(Network[y][x]), &(PrecipMap[y][x]), 
			    &(VType[VegMap[y][x].Veg-1]), &(VegMap[y][x]), &(SType[SoilMap[y][x].Soil-1]),
			    &(SoilMap[y][x]), &(SnowMap[y][x]), &(RadiationMap[y][x]), &(EvapMap[y][x]), 
                &(Total.Rad), &ChannelData, SkyViewMap);
		 
		  PrecipMap[y][x].SumPrecip += PrecipMap[y][x].Precip;
		}
	  }
    }

	/* Average all RBM inputs over each segment */
	if (Options.StreamTemp) {
	  channel_grid_avg(ChannelData.streams);
      if (Options.CanopyShading)
	    CalcCanopyShading(&Time, ChannelData.streams, &SolarGeo);
	}

 #ifndef SNOW_ONLY
    
    RouteSubSurface(Time.Dt, &Map, TopoMap, VType, VegMap, Network,
		    SType, SoilMap, &ChannelData, &Time, &Options, Dump.Path,
		    MaxStreamID, SnowMap);

    if (Options.HasNetwork)
      RouteChannel(&ChannelData, &Time, &Map, TopoMap, SoilMap, &Total, 
		   &Options, Network, SType, PrecipMap, LocalMet.Tair, LocalMet.Rh);

    if (Options.Extent == BASIN)
      RouteSurface(&Map, &Time, TopoMap, SoilMap, &Options,
        UnitHydrograph, &HydrographInfo, Hydrograph,
        &Dump, VegMap, VType, &ChannelData);

#endif

    if (NGraphics > 0)
      draw(&(Time.Current), IsEqualTime(&(Time.Current), &(Time.Start)),
	   Time.DayStep, &Map, NGraphics, which_graphics, VType,
	   SType, SnowMap, SoilMap, VegMap, TopoMap, PrecipMap,
	   PrismMap, SkyViewMap, ShadowMap, EvapMap, RadiationMap, 
	   MetMap, Network, &Options);
    
    Aggregate(&Map, &Options, TopoMap, &Soil, &Veg, VegMap, EvapMap, PrecipMap,
	      RadiationMap, SnowMap, SoilMap, &Total, VType, Network, &ChannelData, &roadarea);
    
    MassBalance(&(Time.Current), &(Time.Start), &(Dump.Balance), &Total, &Mass);

    ExecDump(&Map, &(Time.Current), &(Time.Start), &Options, &Dump, TopoMap,
	     EvapMap, RadiationMap, PrecipMap, SnowMap, MetMap, VegMap, &Veg, 
		 SoilMap, Network, &ChannelData, &Soil, &Total, &HydrographInfo,Hydrograph);
	
    IncreaseTime(&Time);
	t += 1;
  }

  ExecDump(&Map, &(Time.Current), &(Time.Start), &Options, &Dump, TopoMap,
	   EvapMap, RadiationMap, PrecipMap, SnowMap, MetMap, VegMap, &Veg, SoilMap,
	   Network, &ChannelData, &Soil, &Total, &HydrographInfo, Hydrograph);

  FinalMassBalance(&(Dump.FinalBalance), &Total, &Mass);

  printf("\nEND OF MODEL RUN\n\n");

  /* record the run time at the end of each time loop */
  finish1 = clock ();
  runtime = (finish1-start)/CLOCKS_PER_SEC;
  printf("***********************************************************************************");
  printf("\nRuntime Summary:\n");
  printf("%6.2f hours elapsed for the simulation period of %d hours (%.1f days) \n", 
	  runtime/3600, t*Time.Dt/3600, (float)t*Time.Dt/3600/24);

  return EXIT_SUCCESS;
}
void CChannelThread_CGI::SetDomElement(QDomElement ChannelElement_)
{
    m_ChannelElement = ChannelElement_;
    InitChannel();
}
Example #10
0
int ClusterReceiver::svc(void)
{
	char buf[U_SIZE] = { };

	while(loop)
	{
		memset(buf,0,U_SIZE);
		ACE_INET_Addr remote_addr;
		int rece_size = 0;
		ACE_Time_Value tv(1.5);
		//check reload
		if(reload)
		{
			//close orign channel
			switch(recv_type_)
			{
				case MCAST:
					mcast_.leave(addr_);
					mcast_.close();
					addr_.dump();
					break;
				case UCAST:
					ucast_.close();
			}

			//join new channel
			InitChannel();

			reload = false;
		}

		switch(recv_type_)
		{
			case MCAST:
				{
					rece_size = mcast_.recv((void*)buf,U_SIZE,remote_addr,0,&tv);
				}
				break;
			case UCAST:
				{
					rece_size = ucast_.recv((void*)buf,U_SIZE,remote_addr,0,&tv);
				}
				break;
		}
		if(rece_size && (*buf))
		{
			mongo::BSONObj temp((char*)buf);
			std::cout << temp << std::endl;
			std::vector<mongo::BSONElement> ele;
			temp.elems(ele);

			if(ele.size()<3)
			{
				LOG4CXX_WARN(log_,"Too little BSONObj fields");
			}
			else if(!temp.hasField("host_ID") || !temp.hasField("heartbeat"))
			{
				LOG4CXX_WARN(log_,"This BSONObj do not hace necessary fields!");
			}
			else
			{
				char* ch = new char[temp.objsize()];
				memcpy(ch,buf,temp.objsize());
				msg_ = new ACE_Message_Block(ch,temp.objsize());
				sender_->Put(msg_);
			}
		}
	}

	return 0;
}
Example #11
0
/**
 * Construct an analog channel on a specified module.
 * 
 * @param moduleNumber The analog module (1 or 2).
 * @param channel The channel number to represent.
 */
AnalogChannel::AnalogChannel(UINT8 moduleNumber, UINT32 channel)
{
	InitChannel(moduleNumber, channel);
}