inline BOOL ClientFactory::Init()
{
astring strPath;
if (m_SysPath.GetSystemPath(strPath) == FALSE)
{
return FALSE;
}
printf("Sys path %s\n", strPath.c_str());
#ifdef WIN32
#ifndef _WIN64
astring strPathConf = strPath + "vidstor\\clientconfig";
#else
astring strPathConf = strPath + "vidstor64\\clientconfig";
#endif
#else
astring strPathConf = strPath + "vidstor/clientconfig";
#endif
m_Conf.Open(strPathConf);
/* Init export path */
astring strExportPath;
GetExportPath(strExportPath);
m_StorFactory->Init();
InitLicense();
return TRUE;
}
inline BOOL Factory::Init()
{
s32 i = 0;
for (i = 0; i < FACTORY_DEVICE_ID_MAX; i ++)
{
m_strDeviceMap[i] = 'n';
}
for (i = 0; i < FACTORY_DEVICE_ID_MAX; i ++)
{
m_strVIPCMap[i] = 'n';
}
astring strPath;
if (m_SysPath.GetSystemPath(strPath) == FALSE)
{
return FALSE;
}
printf("Sys path %s\n", strPath.c_str());
#ifdef WIN32
#ifndef _WIN64
astring strPathConf = strPath + "videodb\\config";
#else
astring strPathConf = strPath + "videodb64\\config";
#endif
#else
astring strPathConf = strPath + "videodb/config";
#endif
m_Conf.Open(strPathConf);
#ifndef _WIN64
astring strPathDb = strPath + "videodb";
#else
astring strPathDb = strPath + "videodb64";
#endif
m_pVdb = new VDB(strPathDb);
VSCHdfsRecordData HdfsConf;
m_Conf.GetHdfsRecordConf(HdfsConf);
astring strNameNode = HdfsConf.data.conf.NameNode;
astring strPort = HdfsConf.data.conf.Port;
astring strUser = HdfsConf.data.conf.User;
m_pVHdfsdb = new VHdfsDB(strNameNode, strPort, strUser);
VSCConfData sysData;
m_Conf.GetSysData(sysData);
for (s32 i = 1; i < CONF_MAP_MAX; i ++)
{
if (sysData.data.conf.DeviceMap[i] != CONF_MAP_INVALID_MIN
&& sysData.data.conf.DeviceMap[i] != 0)
{
VDC_DEBUG( "%s Init Device %d\n",__FUNCTION__, i);
VSCDeviceData Data;
m_Conf.GetDeviceData(i, Data);
DeviceParam mParam(Data);
LockDeviceID(Data.data.conf.nId);
InitAddDevice(mParam, Data.data.conf.nId);
VDC_DEBUG( "%s Id %d\n",__FUNCTION__, Data.data.conf.nId);
}
}
for (s32 i = 1; i < CONF_MAP_MAX; i ++)
{
if (sysData.data.conf.VIPCMap[i] != CONF_MAP_INVALID_MIN
&& sysData.data.conf.VIPCMap[i] != 0)
{
VDC_DEBUG( "%s Init VIPC %d\n",__FUNCTION__, i);
VSCVIPCData Data;
m_Conf.GetVIPCData(i, Data);
VIPCDeviceParam mParam(Data);
LockVIPCID(Data.data.conf.nId);
m_VIPCDeviceParamMap[i] = mParam;
VDC_DEBUG( "%s Id %d\n",__FUNCTION__, Data.data.conf.nId);
}
}
InitLicense();
//m_pThread = new thread(Factory::Run, (void *)this);
//start();
m_HddTask = new FactoryHddTask(*this);
m_HddTask->start();
if (sysData.data.conf.OAPIPort == 0)
{
sysData.data.conf.OAPIPort = 9080;
}
//m_pHttpServer = new CmnHttpServer(sysData.data.conf.OAPIPort);
//m_pHttpServer->start();
return TRUE;
}
inline BOOL Factory::Init()
{
astring strPath;
if (m_SysPath.GetSystemPath(strPath) == FALSE)
{
return FALSE;
}
printf("Sys path %s\n", strPath.c_str());
#ifdef WIN32
#ifndef _WIN64
astring strPathConf = strPath + "vidstor\\config";
#else
astring strPathConf = strPath + "vidstor64\\config";
#endif
#else
astring strPathConf = strPath + "vidstor/config";
#endif
m_Conf.Open(strPathConf);
#ifndef _WIN64
astring strPathDb = strPath + "vidstor";
#else
astring strPathDb = strPath + "vidstor64";
#endif
m_pVdb = new VDB(strPathDb);
VidHDFSConf HdfsConf;
m_Conf.GetHdfsRecordConf(HdfsConf);
astring strNameNode = HdfsConf.strnamenode();
astring strPort = HdfsConf.strport();
astring strUser = HdfsConf.struser();
m_pVHdfsdb = new VHdfsDB(strNameNode, strPort, strUser);
#if 1 //add camera for test
{
VidCameraList cameraList;
CameraParam Param;
Param.m_Conf.set_strip("192.168.0.123");
Param.m_Conf.set_strport("80");
Param.m_Conf.set_struser("admin");
Param.m_Conf.set_strpasswd("12345");
VidCamera *pAddCam = cameraList.add_cvidcamera();
*pAddCam = Param.m_Conf;
m_Conf.UpdateCameraListConf(cameraList);
}
#endif
VidCameraList cameraList;
m_Conf.GetCameraListConf(cameraList);
int cameraSize = cameraList.cvidcamera_size();
for (s32 i = 0; i < cameraList.cvidcamera_size(); i ++)
{
VidCamera cam = cameraList.cvidcamera(i);
CameraParam pParam(cam);
InitAddCamera(pParam, cam.strid());
}
#if 0
VSCConfData sysData;
m_Conf.GetSysData(sysData);
for (s32 i = 1; i < CONF_MAP_MAX; i ++)
{
if (sysData.data.conf.CameraMap[i] != CONF_MAP_INVALID_MIN
&& sysData.data.conf.CameraMap[i] != 0)
{
VDC_DEBUG( "%s Init Camera %d\n",__FUNCTION__, i);
VSCCameraData Data;
m_Conf.GetCameraData(i, Data);
CameraParam mParam(Data);
LockCameraID(Data.data.conf.nId);
InitAddCamera(mParam, Data.data.conf.nId);
VDC_DEBUG( "%s Id %d\n",__FUNCTION__, Data.data.conf.nId);
}
}
#endif
InitLicense();
//m_pThread = new thread(Factory::Run, (void *)this);
//start();
m_HddTask = new FactoryHddTask(*this);
m_HddTask->start();
//if (sysData.data.conf.OAPIPort == 0)
{
//sysData.data.conf.OAPIPort = 9080;
}
//m_pHttpServer = new CmnHttpServer(sysData.data.conf.OAPIPort);
//m_pHttpServer->start();
/* Init export path */
astring strExportPath;
GetExportPath(strExportPath);
return TRUE;
}
BOOL CPeraProcessDesignerApp::InitInstance()
{
ZTools::InitZToolsLog();
if ( !m_CmdLine.Parse() )
{
MessageBox( NULL, "解析命令行失败！", g_lpszAppTitle, MB_OK | MB_TOPMOST );
return FALSE;
}
m_hMetux = CreateMutex(NULL,TRUE,"PeraProcessDesigner.exe");
if (m_hMetux)
{
if (ERROR_ALREADY_EXISTS== GetLastError())
{
HWND hwndPeraProcessDesignerCopied = FindPeraProcessDesignerMainWindow();
//当有互斥，但是没找到窗口时，认为之前的进程还在启动中，简单处理，直接退出
if ( hwndPeraProcessDesignerCopied)
{
if ( !m_CmdLine.GetValue( NULL ).IsEmpty() )
{
#define WS_OPENWS_SENDMSG
#ifdef WS_OPENWS_SENDMSG
DWORD dwProcessId = 0;
GetWindowThreadProcessId(hwndPeraProcessDesignerCopied, &dwProcessId);
if ( GetTopModalWindow( dwProcessId ) == NULL )
{
CSharedMemory Mem;
CString sMemData = g_lpszDoubleOpenWsMemStr;
Mem.Init( g_lpszDoubleOpenWsMemName, sMemData.GetLength()+MAX_PATH );
SendCopyData( hwndPeraProcessDesignerCopied, CPMSG_WORKSPACE_MAKESUREINFO, (LPVOID)NULL, 0 );
sMemData.Empty();
sMemData = (LPCTSTR)Mem.GetData();
if ( sMemData.CompareNoCase( g_lpszDoubleOpenWsMemStr ) == 0 )
{
MessageBox( NULL, "建模环境处于活动状态，请先保存模型后重试！", g_lpszAppTitle, MB_OK | MB_TOPMOST );
}
else
{
CString sCmdLine = ::GetCommandLine();
SendCopyData( hwndPeraProcessDesignerCopied, CPMSG_WORKSPACE_OPENWS, (LPVOID)(LPCTSTR)sCmdLine, sCmdLine.GetLength()+1 );
}
}
else
{
MessageBox( NULL, "建模环境处于活动状态，请先保存模型后重试！", g_lpszAppTitle, MB_OK | MB_TOPMOST );
}
#else
MessageBox( hwndPeraProcessDesignerCopied, "建模环境已打开，请在建模环境中打开本文件！", g_lpszAppTitle, MB_OK | MB_TOPMOST );
#endif
}
if (IsIconic(hwndPeraProcessDesignerCopied))
ShowWindow(hwndPeraProcessDesignerCopied,SW_RESTORE);
SetForegroundWindow(hwndPeraProcessDesignerCopied);
ZTools::WriteZToolsFormatLog("将已经运行的建模窗口激活,并前端显示...");
}
CloseHandle(m_hMetux);
m_hMetux = NULL;
ZTools::WriteZToolsFormatLog("已经存在一个建模客户端,本运行实例将退出...");
return FALSE;
}
}
m_LoginData.m_strRealName = m_CmdLine.GetValue( "realName" );
m_LoginData.m_strUser = m_CmdLine.GetValue( "userName" );
m_LoginData.m_strTicket = m_CmdLine.GetValue( "ticket-proxy" );
WriteShareMemoryLoginInfo();
CCrashHandler ch;
ch.SetProcessExceptionHandlers();
ch.SetThreadExceptionHandlers();
//如果PeraTaskService进程不存在，自动启动
StartPeraTaskService();
//_CrtSetBreakAlloc(1300);
// InitCommonControlsEx() is required on Windows XP if an application
// manifest specifies use of ComCtl32.dll version 6 or later to enable
// visual styles. Otherwise, any window creation will fail.
INITCOMMONCONTROLSEX InitCtrls;
InitCtrls.dwSize = sizeof(InitCtrls);
// Set this to include all the common control classes you want to use
// in your application.
InitCtrls.dwICC = ICC_WIN95_CLASSES;
InitCommonControlsEx(&InitCtrls);
//hModule = ::LoadLibrary("C:\\Users\\kunmiao-li\\Desktop\\TestBuild\\PeraLicMgr\\Release\\PeraLicMgr.dll");
//#ifndef _DEBUG
if (!InitLicense("PeraWorkSpace"))
return FALSE;
// if(!m_FlexNetMgr.CheckOutLicense("PeraWorkSpace"))
// {
// return FALSE;
// }
// hModule = ::LoadLibrary(ZTools::FormatString("%s\\PeraLicMgr.dll", GetFlexwareBinPathMethod()).c_str());
// if( hModule != NULL )
// {
// lpFnDLLfunc = (LPFNDLLFUNC) ::GetProcAddress(hModule, "CheckOutLicense");
// if(lpFnDLLfunc != NULL)
// {
// if(!lpFnDLLfunc("PeraProcessDesigner"))
// {
// return FALSE;
// }
// }
// else
// {
// return FALSE;
// }
// }
// else
// {
// AfxMessageBox("检测到系统安装不完整，请联系管理员重新安装！", MB_OK|MB_ICONINFORMATION);
// return FALSE;
// }
//#endif
//if(!m_FlexNetMgr.InitNewJob("PeraProcessDesigner"))
//{
// return FALSE;
//}
CWinApp::InitInstance();
InitGDIPlus();
LoadResLibImageSet();
//LoadDefaultFont();
//CBCGPPopupMenuBar::SetPeraPaint( g_crToolbarBg );
//CXmlBase xml;
//MSXML2::IXMLDOMDocument2Ptr pdoc = xml.GetXmlDocPtrByFile(GetExecDir() + "\\Manifest.xml");
//MSXML2::IXMLDOMNodeListPtr pModels;
//MSXML2::IXMLDOMNodePtr pModel;
//long lModelCount;
//HRESULT hr = S_OK;
//map<CString, CString> mapAttrs;
//map<CString, CString>::iterator iterAttrs;
//CString str;
//pModels = xml.GetNodeListPtr("/Manifest/Component", pdoc);
//if (pModels != NULL)
//{
// lModelCount = pModels->Getlength();
// for (long i=0; i<lModelCount; i++)
// {
// hr = pModels->get_item(i, &pModel);
// if (FAILED(hr) || NULL == pModel)
// {
// continue;
// }
// if (0 == xml.GetAttrsOfNode(mapAttrs, pModel))
// {
// continue;
// }
// iterAttrs = mapAttrs.find("RobotName");
// if (iterAttrs != mapAttrs.end()) str= iterAttrs->second;
// }
//}
//CCxArray3D a3d(DT_ARRAY3D_INT);
//CString str3d = "[1,2,3,4,5,](4,3,2)"
//CString str = "[1e150,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24](2,3,4)";
// CString str = "[\"\\\\\\\",,1e150\",\"2\"](2)";
//{
// CString str1;
// for (int a=0;a<2;a++)
// {
// for (int b=0;b<3;b++)
// {
// for (int c=0;c<4;c++)
// {
// }
// }
// }
//}
//
//CxArrayND nd( DT_ARRAY1D_STRING );
//nd.Parse( str );
//vector<int> vPos;
//vPos.push_back(0);
////vPos.push_back(0);
////vPos.push_back(0);
//LPARAM lpData = nd.GetDataPtr( vPos );
//CString * pData = reinterpret_cast< CString * > ( lpData );
//nd.Clear();
// Initialize OLE libraries
if (!AfxOleInit())
{
AfxMessageBox(IDP_OLE_INIT_FAILED);
return FALSE;
}
AfxEnableControlContainer();
EnableTaskBarInteraction(FALSE);
globalData.SetDPIAware ();
//globalData.bDisableAero = TRUE;
//Bar挺靠后，Slider宽度，由于Splitter最小宽度为4，所以此值不应小于4，否则与Splitter不协调。
CBCGPSlider::m_nDefaultWidth = 4;
// All registry read/write operations will be produced via CBCGPXMLSettings gateway:
CBCGPRegistrySP::SetRuntimeClass (RUNTIME_CLASS (CBCGPXMLSettings));
// Read settings:
CBCGPXMLSettings::ReadXMLFromFile (FALSE, GetExecDir() + _T("\\user.xml"));
// Standard initialization
// If you are not using these features and wish to reduce the size
// of your final executable, you should remove from the following
// the specific initialization routines you do not need
// Change the registry key under which our settings are stored
// TODO: You should modify this string to be something appropriate
// such as the name of your company or organization
//SetRegistryKey(_T("PeraProcessDesigner"));
//LoadStdProfileSettings(0); // Load standard INI file options (including MRU)
//SetRegistryBase (_T("Settings"));
RECT rectDesktop;
SystemParametersInfo(SPI_GETWORKAREA,0,(PVOID)&rectDesktop,0);
m_rcLastWindowPlacement = rectDesktop;
CRect rectDesktop2 = rectDesktop;
int nFlag = 0;
int nShowCmd = 0;
LoadWindowPlacement( m_rcLastWindowPlacement, nFlag, nShowCmd );
StoreWindowPlacement (rectDesktop2, 2, SW_SHOWMAXIMIZED);
theGlobalConfig.Load();
m_bAloneVersionWs = IsPeraProcessRunnerInstalled();
CCxBCGPVisualManager2007::SetStyle (CCxBCGPVisualManager2007::VS2007_Silver);
CCxBCGPVisualManager2007::SetDefaultManager (RUNTIME_CLASS (CCxBCGPVisualManager2007));
//globalData.bDisableAero = TRUE;
//globalData.bIsOSAlphaBlendingSupport = TRUE;
// Initialize all Managers for usage. They are automatically constructed
// if not yet present
InitMouseManager();
//InitContextMenuManager();
InitKeyboardManager();
// Enable user-defined tools. If you want allow more than 10 tools,
// add tools entry to resources (ID_USER_TOOL11, ID_USER_TOOL12,...)
EnableUserTools (ID_TOOLS_ENTRY, ID_USER_TOOL1, ID_USER_TOOL10);
// TODO: Remove this if you don't want extended tooltips:
InitTooltipManager();
CBCGPToolTipParams params;
params.m_bVislManagerTheme = TRUE;
theApp.GetTooltipManager ()->SetTooltipParams (
BCGP_TOOLTIP_TYPE_ALL,
RUNTIME_CLASS (CBCGPToolTipCtrl),
¶ms);
// Register the application's document templates. Document templates
// serve as the connection between documents, frame windows and views
CMultiDocTemplate* pDocTemplate;
pDocTemplate = new CMultiDocTemplate(IDR_MAIN,
RUNTIME_CLASS(CPeraProcessDesignerDoc),
RUNTIME_CLASS(CChildFrame), // custom MDI child frame
RUNTIME_CLASS(CPeraProcessDesignerView));
if (!pDocTemplate)
return FALSE;
AddDocTemplate(pDocTemplate);
// create main MDI Frame window
CMainFrame* pMainFrame = new CMainFrame;
if (!pMainFrame->LoadFrame(IDR_MAIN))
return FALSE;
m_bCreate = TRUE;
m_pMainWnd = pMainFrame;
//basehtmldialog中，屏蔽快捷键
g_hwndMainWindow = pMainFrame->GetSafeHwnd();
g_pLoadingWindow = new CLoadingWindow( TIMER_LOADING_WINDOW, IDD_DIALOG_LOGIN_BK, m_pMainWnd );
g_pLoadingWindow->Create( IDD_DIALOG_LOGIN_BK, m_pMainWnd );
g_pLoadingWindow->Init( GetExecDir() + "\\Res\\DlgProgress\\DlgProgress.png" );
pMainFrame->m_wndMenuBar.LoadData();
//pMainFrame->OnMenuModuleOpenjianmo();
// call DragAcceptFiles only if there's a suffix
// In an MDI app, this should occur immediately after setting m_pMainWnd
// Parse command line for standard shell commands, DDE, file open
//CCommandLineInfo cmdInfo;
//ParseCommandLine(cmdInfo);
//if (cmdInfo.m_nShellCommand == CCommandLineInfo::FileNew)
//{
// if (!pMainFrame->LoadMDIState (GetRegSectionPath ()) ||
// DYNAMIC_DOWNCAST(CMDIChildWnd, pMainFrame->GetActiveFrame()) == NULL)
// {
// if (!ProcessShellCommand(cmdInfo))
// return FALSE;
// }
//}
//else
//{
// // Dispatch commands specified on the command line
// if (!ProcessShellCommand(cmdInfo))
// return FALSE;
//}
// The main window has been initialized, so show and update it
pMainFrame->OnMenuModuleOpenjianmo();
m_bInitMDI = TRUE;
m_nCmdShow = SW_SHOWMAXIMIZED;
pMainFrame->ShowWindow(m_nCmdShow);
pMainFrame->UpdateWindow();
//////////////////////////////////////////////////////////////////////////
//日志输出窗口
#ifdef USE_DLGLOG
m_dlgLog.Create(CDlgLog::IDD, NULL);
//m_dlgLog.ShowWindow(SW_SHOW);
// int x, y;
// x = GetSystemMetrics(SM_CXFULLSCREEN); //屏幕宽度
// y = GetSystemMetrics(SM_CYFULLSCREEN); //屏幕高度
CRect rectFull;
SystemParametersInfo(SPI_GETWORKAREA,0,&rectFull,0);
CRect rect;
m_dlgLog.GetWindowRect(rect);
rect.MoveToXY(0, rectFull.bottom - rect.Height());
m_dlgLog.MoveWindow(rect);
#endif // USE_DLGLOG
//////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////
//延长票据有效期
StartKeepTicketThread();
//////////////////////////////////////////////////////////////////////////
//在线编辑用到的共享内存初始化
m_pSharedMemoryOnlineEdit = NULL;
m_pSharedMemoryOnlineEdit = new SharedMemoryOnlineEdit();
//////////////////////////////////////////////////////////////////////////
g_ReadRobotDB.Load();
pMainFrame->m_wndLoginBar.RedrawWindow();
CString sParamFile = m_CmdLine.GetValue( NULL );
if ( !sParamFile.IsEmpty() )
{
ZTools::WriteZToolsFormatLog( "--------------********打开文件[%s]**********-------------", sParamFile );
theApp.m_processMgr.Open( sParamFile );
}
else
{
ZTools::WriteZToolsLog( "--------------********未打开文件逻辑**********-------------" );
CDlgStart lgn;
lgn.DoModal();
}
#ifdef USE_DLGLOG
m_dlgLog.ShowWindow(SW_SHOW);
#endif // USE_DLGLOG
//////////////////////////////////////////////////////////////////////////
WINDOWPLACEMENT wp;
memset(&wp, NULL, sizeof(wp));
wp.length = sizeof (WINDOWPLACEMENT);
if (pMainFrame->GetWindowPlacement (&wp))
{
wp.rcNormalPosition = m_rcLastWindowPlacement;
RECT rectDesktop;
SystemParametersInfo(SPI_GETWORKAREA,0,(PVOID)&rectDesktop,0);
OffsetRect(&wp.rcNormalPosition, -rectDesktop.left, -rectDesktop.top);
pMainFrame->SetWindowPlacement (&wp);
}
return TRUE;
}
