/* --------------------------------
* InitPostgres
* Initialize POSTGRES.
*
* The database can be specified by name, using the in_dbname parameter, or by
* OID, using the dboid parameter. In the latter case, the actual database
* name can be returned to the caller in out_dbname. If out_dbname isn't
* NULL, it must point to a buffer of size NAMEDATALEN.
*
* In bootstrap mode no parameters are used. The autovacuum launcher process
* doesn't use any parameters either, because it only goes far enough to be
* able to read pg_database; it doesn't connect to any particular database.
* In walsender mode only username is used.
*
* As of PostgreSQL 8.2, we expect InitProcess() was already called, so we
* already have a PGPROC struct ... but it's not completely filled in yet.
*
* Note:
* Be very careful with the order of calls in the InitPostgres function.
* --------------------------------
*/
void
InitPostgres(const char *in_dbname, Oid dboid, const char *username,
char *out_dbname)
{
bool bootstrap = IsBootstrapProcessingMode();
bool am_superuser;
char *fullpath;
char dbname[NAMEDATALEN];
elog(DEBUG3, "InitPostgres");
/*
* Add my PGPROC struct to the ProcArray.
*
* Once I have done this, I am visible to other backends!
*/
InitProcessPhase2();
/*
* Initialize my entry in the shared-invalidation manager's array of
* per-backend data.
*
* Sets up MyBackendId, a unique backend identifier.
*/
MyBackendId = InvalidBackendId;
SharedInvalBackendInit(false);
if (MyBackendId > MaxBackends || MyBackendId <= 0)
elog(FATAL, "bad backend ID: %d", MyBackendId);
/* Now that we have a BackendId, we can participate in ProcSignal */
ProcSignalInit(MyBackendId);
/*
* Also set up timeout handlers needed for backend operation. We need
* these in every case except bootstrap.
*/
if (!bootstrap)
{
RegisterTimeout(DEADLOCK_TIMEOUT, CheckDeadLock);
RegisterTimeout(STATEMENT_TIMEOUT, StatementTimeoutHandler);
RegisterTimeout(LOCK_TIMEOUT, LockTimeoutHandler);
}
/*
* bufmgr needs another initialization call too
*/
InitBufferPoolBackend();
/*
* Initialize local process's access to XLOG.
*/
if (IsUnderPostmaster)
{
/*
* The postmaster already started the XLOG machinery, but we need to
* call InitXLOGAccess(), if the system isn't in hot-standby mode.
* This is handled by calling RecoveryInProgress and ignoring the
* result.
*/
(void) RecoveryInProgress();
}
else
{
/*
* We are either a bootstrap process or a standalone backend. Either
* way, start up the XLOG machinery, and register to have it closed
* down at exit.
*/
StartupXLOG();
on_shmem_exit(ShutdownXLOG, 0);
}
/*
* Initialize the relation cache and the system catalog caches. Note that
* no catalog access happens here; we only set up the hashtable structure.
* We must do this before starting a transaction because transaction abort
* would try to touch these hashtables.
*/
RelationCacheInitialize();
InitCatalogCache();
InitPlanCache();
/* Initialize portal manager */
EnablePortalManager();
/* Initialize stats collection --- must happen before first xact */
if (!bootstrap)
pgstat_initialize();
/*
* Load relcache entries for the shared system catalogs. This must create
* at least entries for pg_database and catalogs used for authentication.
*/
RelationCacheInitializePhase2();
/*
* Set up process-exit callback to do pre-shutdown cleanup. This is the
* first before_shmem_exit callback we register; thus, this will be the
* last thing we do before low-level modules like the buffer manager begin
* to close down. We need to have this in place before we begin our first
* transaction --- if we fail during the initialization transaction, as is
* entirely possible, we need the AbortTransaction call to clean up.
*/
before_shmem_exit(ShutdownPostgres, 0);
/* The autovacuum launcher is done here */
if (IsAutoVacuumLauncherProcess())
return;
/*
* Start a new transaction here before first access to db, and get a
* snapshot. We don't have a use for the snapshot itself, but we're
* interested in the secondary effect that it sets RecentGlobalXmin. (This
* is critical for anything that reads heap pages, because HOT may decide
* to prune them even if the process doesn't attempt to modify any
* tuples.)
*/
if (!bootstrap)
{
/* statement_timestamp must be set for timeouts to work correctly */
SetCurrentStatementStartTimestamp();
StartTransactionCommand();
/*
* transaction_isolation will have been set to the default by the
* above. If the default is "serializable", and we are in hot
* standby, we will fail if we don't change it to something lower.
* Fortunately, "read committed" is plenty good enough.
*/
XactIsoLevel = XACT_READ_COMMITTED;
(void) GetTransactionSnapshot();
}
/*
* Perform client authentication if necessary, then figure out our
* postgres user ID, and see if we are a superuser.
*
* In standalone mode and in autovacuum worker processes, we use a fixed
* ID, otherwise we figure it out from the authenticated user name.
*/
if (bootstrap || IsAutoVacuumWorkerProcess())
{
InitializeSessionUserIdStandalone();
am_superuser = true;
}
else if (!IsUnderPostmaster)
{
InitializeSessionUserIdStandalone();
am_superuser = true;
if (!ThereIsAtLeastOneRole())
ereport(WARNING,
(errcode(ERRCODE_UNDEFINED_OBJECT),
errmsg("no roles are defined in this database system"),
errhint("You should immediately run CREATE USER \"%s\" SUPERUSER;.",
username)));
}
else if (IsBackgroundWorker)
{
if (username == NULL)
{
InitializeSessionUserIdStandalone();
am_superuser = true;
}
else
{
InitializeSessionUserId(username);
am_superuser = superuser();
}
}
else
{
/* normal multiuser case */
Assert(MyProcPort != NULL);
PerformAuthentication(MyProcPort);
InitializeSessionUserId(username);
am_superuser = superuser();
}
/*
* If we're trying to shut down, only superusers can connect, and new
* replication connections are not allowed.
*/
if ((!am_superuser || am_walsender) &&
MyProcPort != NULL &&
MyProcPort->canAcceptConnections == CAC_WAITBACKUP)
{
if (am_walsender)
ereport(FATAL,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
errmsg("new replication connections are not allowed during database shutdown")));
else
ereport(FATAL,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
errmsg("must be superuser to connect during database shutdown")));
}
/*
* Binary upgrades only allowed super-user connections
*/
if (IsBinaryUpgrade && !am_superuser)
{
ereport(FATAL,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
errmsg("must be superuser to connect in binary upgrade mode")));
}
/*
* The last few connections slots are reserved for superusers. Although
* replication connections currently require superuser privileges, we
* don't allow them to consume the reserved slots, which are intended for
* interactive use.
*/
if ((!am_superuser || am_walsender) &&
ReservedBackends > 0 &&
!HaveNFreeProcs(ReservedBackends))
ereport(FATAL,
(errcode(ERRCODE_TOO_MANY_CONNECTIONS),
errmsg("remaining connection slots are reserved for non-replication superuser connections")));
/* Check replication permissions needed for walsender processes. */
if (am_walsender)
{
Assert(!bootstrap);
if (!superuser() && !has_rolreplication(GetUserId()))
ereport(FATAL,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
errmsg("must be superuser or replication role to start walsender")));
}
/*
* If this is a plain walsender only supporting physical replication, we
* don't want to connect to any particular database. Just finish the
* backend startup by processing any options from the startup packet, and
* we're done.
*/
if (am_walsender && !am_db_walsender)
{
/* process any options passed in the startup packet */
if (MyProcPort != NULL)
process_startup_options(MyProcPort, am_superuser);
/* Apply PostAuthDelay as soon as we've read all options */
if (PostAuthDelay > 0)
pg_usleep(PostAuthDelay * 1000000L);
/* initialize client encoding */
InitializeClientEncoding();
/* report this backend in the PgBackendStatus array */
pgstat_bestart();
/* close the transaction we started above */
CommitTransactionCommand();
return;
}
/*
* Set up the global variables holding database id and default tablespace.
* But note we won't actually try to touch the database just yet.
*
* We take a shortcut in the bootstrap case, otherwise we have to look up
* the db's entry in pg_database.
*/
if (bootstrap)
{
MyDatabaseId = TemplateDbOid;
MyDatabaseTableSpace = DEFAULTTABLESPACE_OID;
}
else if (in_dbname != NULL)
{
HeapTuple tuple;
Form_pg_database dbform;
tuple = GetDatabaseTuple(in_dbname);
if (!HeapTupleIsValid(tuple))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist", in_dbname)));
dbform = (Form_pg_database) GETSTRUCT(tuple);
MyDatabaseId = HeapTupleGetOid(tuple);
MyDatabaseTableSpace = dbform->dattablespace;
/* take database name from the caller, just for paranoia */
strlcpy(dbname, in_dbname, sizeof(dbname));
}
else if (OidIsValid(dboid))
{
/* caller specified database by OID */
HeapTuple tuple;
Form_pg_database dbform;
tuple = GetDatabaseTupleByOid(dboid);
if (!HeapTupleIsValid(tuple))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database %u does not exist", dboid)));
dbform = (Form_pg_database) GETSTRUCT(tuple);
MyDatabaseId = HeapTupleGetOid(tuple);
MyDatabaseTableSpace = dbform->dattablespace;
Assert(MyDatabaseId == dboid);
strlcpy(dbname, NameStr(dbform->datname), sizeof(dbname));
/* pass the database name back to the caller */
if (out_dbname)
strcpy(out_dbname, dbname);
}
else
{
/*
* If this is a background worker not bound to any particular
* database, we're done now. Everything that follows only makes
* sense if we are bound to a specific database. We do need to
* close the transaction we started before returning.
*/
if (!bootstrap)
CommitTransactionCommand();
return;
}
/*
* Now, take a writer's lock on the database we are trying to connect to.
* If there is a concurrently running DROP DATABASE on that database, this
* will block us until it finishes (and has committed its update of
* pg_database).
*
* Note that the lock is not held long, only until the end of this startup
* transaction. This is OK since we will advertise our use of the
* database in the ProcArray before dropping the lock (in fact, that's the
* next thing to do). Anyone trying a DROP DATABASE after this point will
* see us in the array once they have the lock. Ordering is important for
* this because we don't want to advertise ourselves as being in this
* database until we have the lock; otherwise we create what amounts to a
* deadlock with CountOtherDBBackends().
*
* Note: use of RowExclusiveLock here is reasonable because we envision
* our session as being a concurrent writer of the database. If we had a
* way of declaring a session as being guaranteed-read-only, we could use
* AccessShareLock for such sessions and thereby not conflict against
* CREATE DATABASE.
*/
if (!bootstrap)
LockSharedObject(DatabaseRelationId, MyDatabaseId, 0,
RowExclusiveLock);
/*
* Now we can mark our PGPROC entry with the database ID.
*
* We assume this is an atomic store so no lock is needed; though actually
* things would work fine even if it weren't atomic. Anyone searching the
* ProcArray for this database's ID should hold the database lock, so they
* would not be executing concurrently with this store. A process looking
* for another database's ID could in theory see a chance match if it read
* a partially-updated databaseId value; but as long as all such searches
* wait and retry, as in CountOtherDBBackends(), they will certainly see
* the correct value on their next try.
*/
MyProc->databaseId = MyDatabaseId;
/*
* We established a catalog snapshot while reading pg_authid and/or
* pg_database; but until we have set up MyDatabaseId, we won't react to
* incoming sinval messages for unshared catalogs, so we won't realize it
* if the snapshot has been invalidated. Assume it's no good anymore.
*/
InvalidateCatalogSnapshot();
/*
* Recheck pg_database to make sure the target database hasn't gone away.
* If there was a concurrent DROP DATABASE, this ensures we will die
* cleanly without creating a mess.
*/
if (!bootstrap)
{
HeapTuple tuple;
tuple = GetDatabaseTuple(dbname);
if (!HeapTupleIsValid(tuple) ||
MyDatabaseId != HeapTupleGetOid(tuple) ||
MyDatabaseTableSpace != ((Form_pg_database) GETSTRUCT(tuple))->dattablespace)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist", dbname),
errdetail("It seems to have just been dropped or renamed.")));
}
/*
* Now we should be able to access the database directory safely. Verify
* it's there and looks reasonable.
*/
fullpath = GetDatabasePath(MyDatabaseId, MyDatabaseTableSpace);
if (!bootstrap)
{
if (access(fullpath, F_OK) == -1)
{
if (errno == ENOENT)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
dbname),
errdetail("The database subdirectory \"%s\" is missing.",
fullpath)));
else
ereport(FATAL,
(errcode_for_file_access(),
errmsg("could not access directory \"%s\": %m",
fullpath)));
}
ValidatePgVersion(fullpath);
}
SetDatabasePath(fullpath);
/*
* It's now possible to do real access to the system catalogs.
*
* Load relcache entries for the system catalogs. This must create at
* least the minimum set of "nailed-in" cache entries.
*/
RelationCacheInitializePhase3();
/* set up ACL framework (so CheckMyDatabase can check permissions) */
initialize_acl();
/*
* Re-read the pg_database row for our database, check permissions and set
* up database-specific GUC settings. We can't do this until all the
* database-access infrastructure is up. (Also, it wants to know if the
* user is a superuser, so the above stuff has to happen first.)
*/
if (!bootstrap)
CheckMyDatabase(dbname, am_superuser);
/*
* Now process any command-line switches and any additional GUC variable
* settings passed in the startup packet. We couldn't do this before
* because we didn't know if client is a superuser.
*/
if (MyProcPort != NULL)
process_startup_options(MyProcPort, am_superuser);
/* Process pg_db_role_setting options */
process_settings(MyDatabaseId, GetSessionUserId());
/* Apply PostAuthDelay as soon as we've read all options */
if (PostAuthDelay > 0)
pg_usleep(PostAuthDelay * 1000000L);
/*
* Initialize various default states that can't be set up until we've
* selected the active user and gotten the right GUC settings.
*/
/* set default namespace search path */
InitializeSearchPath();
/* initialize client encoding */
InitializeClientEncoding();
/* report this backend in the PgBackendStatus array */
if (!bootstrap)
pgstat_bestart();
/* close the transaction we started above */
if (!bootstrap)
CommitTransactionCommand();
}
/* --------------------------------
* InitPostgres
* Initialize POSTGRES.
*
* The database can be specified by name, using the in_dbname parameter, or by
* OID, using the dboid parameter. In the latter case, the actual database
* name can be returned to the caller in out_dbname. If out_dbname isn't
* NULL, it must point to a buffer of size NAMEDATALEN.
*
* In bootstrap mode no parameters are used. The autovacuum launcher process
* doesn't use any parameters either, because it only goes far enough to be
* able to read pg_database; it doesn't connect to any particular database.
* In walsender mode only username is used.
*
* As of PostgreSQL 8.2, we expect InitProcess() was already called, so we
* already have a PGPROC struct ... but it's not completely filled in yet.
*
* Note:
* Be very careful with the order of calls in the InitPostgres function.
* --------------------------------
*/
void
InitPostgres(const char *in_dbname, Oid dboid, const char *username,
char *out_dbname)
{
bool bootstrap = IsBootstrapProcessingMode();
bool am_superuser;
GucContext gucctx;
char *fullpath;
char dbname[NAMEDATALEN];
elog(DEBUG3, "InitPostgres");
/*
* Add my PGPROC struct to the ProcArray.
*
* Once I have done this, I am visible to other backends!
*/
InitProcessPhase2();
/*
* Initialize my entry in the shared-invalidation manager's array of
* per-backend data.
*
* Sets up MyBackendId, a unique backend identifier.
*/
MyBackendId = InvalidBackendId;
SharedInvalBackendInit(false);
if (MyBackendId > MaxBackends || MyBackendId <= 0)
elog(FATAL, "bad backend id: %d", MyBackendId);
/* Now that we have a BackendId, we can participate in ProcSignal */
ProcSignalInit(MyBackendId);
/*
* bufmgr needs another initialization call too
*/
InitBufferPoolBackend();
/*
* Initialize local process's access to XLOG, if appropriate. In
* bootstrap case we skip this since StartupXLOG() was run instead.
*/
if (!bootstrap)
(void) RecoveryInProgress();
/*
* Initialize the relation cache and the system catalog caches. Note that
* no catalog access happens here; we only set up the hashtable structure.
* We must do this before starting a transaction because transaction abort
* would try to touch these hashtables.
*/
RelationCacheInitialize();
InitCatalogCache();
InitPlanCache();
/* Initialize portal manager */
EnablePortalManager();
/* Initialize stats collection --- must happen before first xact */
if (!bootstrap)
pgstat_initialize();
/*
* Load relcache entries for the shared system catalogs. This must create
* at least an entry for pg_database.
*/
RelationCacheInitializePhase2();
/*
* Set up process-exit callback to do pre-shutdown cleanup. This has to
* be after we've initialized all the low-level modules like the buffer
* manager, because during shutdown this has to run before the low-level
* modules start to close down. On the other hand, we want it in place
* before we begin our first transaction --- if we fail during the
* initialization transaction, as is entirely possible, we need the
* AbortTransaction call to clean up.
*/
on_shmem_exit(ShutdownPostgres, 0);
/* The autovacuum launcher is done here */
if (IsAutoVacuumLauncherProcess())
return;
/*
* Start a new transaction here before first access to db, and get a
* snapshot. We don't have a use for the snapshot itself, but we're
* interested in the secondary effect that it sets RecentGlobalXmin. (This
* is critical for anything that reads heap pages, because HOT may decide
* to prune them even if the process doesn't attempt to modify any
* tuples.)
*/
if (!bootstrap)
{
StartTransactionCommand();
(void) GetTransactionSnapshot();
}
/*
* Set up the global variables holding database id and default tablespace.
* But note we won't actually try to touch the database just yet.
*
* We take a shortcut in the bootstrap and walsender case, otherwise we
* have to look up the db's entry in pg_database.
*/
if (bootstrap || am_walsender)
{
MyDatabaseId = TemplateDbOid;
MyDatabaseTableSpace = DEFAULTTABLESPACE_OID;
}
else if (in_dbname != NULL)
{
HeapTuple tuple;
Form_pg_database dbform;
tuple = GetDatabaseTuple(in_dbname);
if (!HeapTupleIsValid(tuple))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist", in_dbname)));
dbform = (Form_pg_database) GETSTRUCT(tuple);
MyDatabaseId = HeapTupleGetOid(tuple);
MyDatabaseTableSpace = dbform->dattablespace;
/* take database name from the caller, just for paranoia */
strlcpy(dbname, in_dbname, sizeof(dbname));
}
else
{
/* caller specified database by OID */
HeapTuple tuple;
Form_pg_database dbform;
tuple = GetDatabaseTupleByOid(dboid);
if (!HeapTupleIsValid(tuple))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database %u does not exist", dboid)));
dbform = (Form_pg_database) GETSTRUCT(tuple);
MyDatabaseId = HeapTupleGetOid(tuple);
MyDatabaseTableSpace = dbform->dattablespace;
Assert(MyDatabaseId == dboid);
strlcpy(dbname, NameStr(dbform->datname), sizeof(dbname));
/* pass the database name back to the caller */
if (out_dbname)
strcpy(out_dbname, dbname);
}
/* Now we can mark our PGPROC entry with the database ID */
/* (We assume this is an atomic store so no lock is needed) */
MyProc->databaseId = MyDatabaseId;
/*
* Now, take a writer's lock on the database we are trying to connect to.
* If there is a concurrently running DROP DATABASE on that database, this
* will block us until it finishes (and has committed its update of
* pg_database).
*
* Note that the lock is not held long, only until the end of this startup
* transaction. This is OK since we are already advertising our use of
* the database in the PGPROC array; anyone trying a DROP DATABASE after
* this point will see us there.
*
* Note: use of RowExclusiveLock here is reasonable because we envision
* our session as being a concurrent writer of the database. If we had a
* way of declaring a session as being guaranteed-read-only, we could use
* AccessShareLock for such sessions and thereby not conflict against
* CREATE DATABASE.
*/
if (!bootstrap && !am_walsender)
LockSharedObject(DatabaseRelationId, MyDatabaseId, 0,
RowExclusiveLock);
/*
* Recheck pg_database to make sure the target database hasn't gone away.
* If there was a concurrent DROP DATABASE, this ensures we will die
* cleanly without creating a mess.
*/
if (!bootstrap && !am_walsender)
{
HeapTuple tuple;
tuple = GetDatabaseTuple(dbname);
if (!HeapTupleIsValid(tuple) ||
MyDatabaseId != HeapTupleGetOid(tuple) ||
MyDatabaseTableSpace != ((Form_pg_database) GETSTRUCT(tuple))->dattablespace)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist", dbname),
errdetail("It seems to have just been dropped or renamed.")));
}
/*
* Now we should be able to access the database directory safely. Verify
* it's there and looks reasonable.
*/
fullpath = GetDatabasePath(MyDatabaseId, MyDatabaseTableSpace);
if (!bootstrap && !am_walsender)
{
if (access(fullpath, F_OK) == -1)
{
if (errno == ENOENT)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
dbname),
errdetail("The database subdirectory \"%s\" is missing.",
fullpath)));
else
ereport(FATAL,
(errcode_for_file_access(),
errmsg("could not access directory \"%s\": %m",
fullpath)));
}
ValidatePgVersion(fullpath);
}
SetDatabasePath(fullpath);
/*
* It's now possible to do real access to the system catalogs.
*
* Load relcache entries for the system catalogs. This must create at
* least the minimum set of "nailed-in" cache entries.
*/
RelationCacheInitializePhase3();
/*
* Perform client authentication if necessary, then figure out our
* postgres user ID, and see if we are a superuser.
*
* In standalone mode and in autovacuum worker processes, we use a fixed
* ID, otherwise we figure it out from the authenticated user name.
*/
if (bootstrap || IsAutoVacuumWorkerProcess())
{
InitializeSessionUserIdStandalone();
am_superuser = true;
}
else if (!IsUnderPostmaster)
{
InitializeSessionUserIdStandalone();
am_superuser = true;
if (!ThereIsAtLeastOneRole())
ereport(WARNING,
(errcode(ERRCODE_UNDEFINED_OBJECT),
errmsg("no roles are defined in this database system"),
errhint("You should immediately run CREATE USER \"%s\" SUPERUSER;.",
username)));
}
else
{
/* normal multiuser case */
Assert(MyProcPort != NULL);
PerformAuthentication(MyProcPort);
InitializeSessionUserId(username);
am_superuser = superuser();
}
/* set up ACL framework (so CheckMyDatabase can check permissions) */
initialize_acl();
/* Process pg_db_role_setting options */
process_settings(MyDatabaseId, GetSessionUserId());
/*
* Re-read the pg_database row for our database, check permissions and set
* up database-specific GUC settings. We can't do this until all the
* database-access infrastructure is up. (Also, it wants to know if the
* user is a superuser, so the above stuff has to happen first.)
*/
if (!bootstrap && !am_walsender)
CheckMyDatabase(dbname, am_superuser);
/*
* If we're trying to shut down, only superusers can connect.
*/
if (!am_superuser &&
MyProcPort != NULL &&
MyProcPort->canAcceptConnections == CAC_WAITBACKUP)
ereport(FATAL,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
errmsg("must be superuser to connect during database shutdown")));
/*
* Check a normal user hasn't connected to a superuser reserved slot.
*/
if (!am_superuser &&
ReservedBackends > 0 &&
!HaveNFreeProcs(ReservedBackends))
ereport(FATAL,
(errcode(ERRCODE_TOO_MANY_CONNECTIONS),
errmsg("connection limit exceeded for non-superusers")));
/*
* Now process any command-line switches that were included in the startup
* packet, if we are in a regular backend. We couldn't do this before
* because we didn't know if client is a superuser.
*/
gucctx = am_superuser ? PGC_SUSET : PGC_BACKEND;
if (MyProcPort != NULL &&
MyProcPort->cmdline_options != NULL)
{
/*
* The maximum possible number of commandline arguments that could
* come from MyProcPort->cmdline_options is (strlen + 1) / 2; see
* pg_split_opts().
*/
char **av;
int maxac;
int ac;
maxac = 2 + (strlen(MyProcPort->cmdline_options) + 1) / 2;
av = (char **) palloc(maxac * sizeof(char *));
ac = 0;
av[ac++] = "postgres";
/* Note this mangles MyProcPort->cmdline_options */
pg_split_opts(av, &ac, MyProcPort->cmdline_options);
av[ac] = NULL;
Assert(ac < maxac);
(void) process_postgres_switches(ac, av, gucctx);
}
/*
* Process any additional GUC variable settings passed in startup packet.
* These are handled exactly like command-line variables.
*/
if (MyProcPort != NULL)
{
ListCell *gucopts = list_head(MyProcPort->guc_options);
while (gucopts)
{
char *name;
char *value;
name = lfirst(gucopts);
gucopts = lnext(gucopts);
value = lfirst(gucopts);
gucopts = lnext(gucopts);
SetConfigOption(name, value, gucctx, PGC_S_CLIENT);
}
}
/* Apply PostAuthDelay as soon as we've read all options */
if (PostAuthDelay > 0)
pg_usleep(PostAuthDelay * 1000000L);
/*
* Initialize various default states that can't be set up until we've
* selected the active user and gotten the right GUC settings.
*/
/* set default namespace search path */
InitializeSearchPath();
/* initialize client encoding */
InitializeClientEncoding();
/* reset the database for walsender */
if (am_walsender)
MyProc->databaseId = MyDatabaseId = InvalidOid;
/* report this backend in the PgBackendStatus array */
if (!bootstrap)
pgstat_bestart();
/* close the transaction we started above */
if (!bootstrap)
CommitTransactionCommand();
}
/* --------------------------------
* InitPostgres
* Initialize POSTGRES.
*
* The database can be specified by name, using the in_dbname parameter, or by
* OID, using the dboid parameter. In the latter case, the computed database
* name is passed out to the caller as a palloc'ed string in out_dbname.
*
* In bootstrap mode no parameters are used.
*
* The return value indicates whether the userID is a superuser. (That
* can only be tested inside a transaction, so we want to do it during
* the startup transaction rather than doing a separate one in postgres.c.)
*
* As of PostgreSQL 8.2, we expect InitProcess() was already called, so we
* already have a PGPROC struct ... but it's not filled in yet.
*
* Note:
* Be very careful with the order of calls in the InitPostgres function.
* --------------------------------
*/
bool
InitPostgres(const char *in_dbname, Oid dboid, const char *username,
char **out_dbname)
{
bool bootstrap = IsBootstrapProcessingMode();
bool autovacuum = IsAutoVacuumWorkerProcess();
bool am_superuser;
char *fullpath;
char dbname[NAMEDATALEN];
/*
* Set up the global variables holding database id and path. But note we
* won't actually try to touch the database just yet.
*
* We take a shortcut in the bootstrap case, otherwise we have to look up
* the db name in pg_database.
*/
if (bootstrap)
{
MyDatabaseId = TemplateDbOid;
MyDatabaseTableSpace = DEFAULTTABLESPACE_OID;
}
else
{
/*
* Find tablespace of the database we're about to open. Since we're
* not yet up and running we have to use one of the hackish
* FindMyDatabase variants, which look in the flat-file copy of
* pg_database.
*
* If the in_dbname param is NULL, lookup database by OID.
*/
if (in_dbname == NULL)
{
if (!FindMyDatabaseByOid(dboid, dbname, &MyDatabaseTableSpace))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database %u does not exist", dboid)));
MyDatabaseId = dboid;
/* pass the database name to the caller */
*out_dbname = pstrdup(dbname);
}
else
{
if (!FindMyDatabase(in_dbname, &MyDatabaseId, &MyDatabaseTableSpace))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
in_dbname)));
/* our database name is gotten from the caller */
strlcpy(dbname, in_dbname, NAMEDATALEN);
}
}
fullpath = GetDatabasePath(MyDatabaseId, MyDatabaseTableSpace);
SetDatabasePath(fullpath);
/*
* Finish filling in the PGPROC struct, and add it to the ProcArray. (We
* need to know MyDatabaseId before we can do this, since it's entered
* into the PGPROC struct.)
*
* Once I have done this, I am visible to other backends!
*/
InitProcessPhase2();
/*
* Initialize my entry in the shared-invalidation manager's array of
* per-backend data.
*
* Sets up MyBackendId, a unique backend identifier.
*/
MyBackendId = InvalidBackendId;
SharedInvalBackendInit();
if (MyBackendId > MaxBackends || MyBackendId <= 0)
elog(FATAL, "bad backend id: %d", MyBackendId);
/*
* bufmgr needs another initialization call too
*/
InitBufferPoolBackend();
/*
* Initialize local process's access to XLOG. In bootstrap case we may
* skip this since StartupXLOG() was run instead.
*/
if (!bootstrap)
InitXLOGAccess();
/*
* Initialize the relation cache and the system catalog caches. Note that
* no catalog access happens here; we only set up the hashtable structure.
* We must do this before starting a transaction because transaction abort
* would try to touch these hashtables.
*/
RelationCacheInitialize();
InitCatalogCache();
InitPlanCache();
/* Initialize portal manager */
EnablePortalManager();
/* Initialize stats collection --- must happen before first xact */
if (!bootstrap)
pgstat_initialize();
/*
* Set up process-exit callback to do pre-shutdown cleanup. This has to
* be after we've initialized all the low-level modules like the buffer
* manager, because during shutdown this has to run before the low-level
* modules start to close down. On the other hand, we want it in place
* before we begin our first transaction --- if we fail during the
* initialization transaction, as is entirely possible, we need the
* AbortTransaction call to clean up.
*/
on_shmem_exit(ShutdownPostgres, 0);
/*
* Start a new transaction here before first access to db, and get a
* snapshot. We don't have a use for the snapshot itself, but we're
* interested in the secondary effect that it sets RecentGlobalXmin.
*/
if (!bootstrap)
{
StartTransactionCommand();
(void) GetTransactionSnapshot();
}
/*
* Now that we have a transaction, we can take locks. Take a writer's
* lock on the database we are trying to connect to. If there is a
* concurrently running DROP DATABASE on that database, this will block us
* until it finishes (and has updated the flat file copy of pg_database).
*
* Note that the lock is not held long, only until the end of this startup
* transaction. This is OK since we are already advertising our use of
* the database in the PGPROC array; anyone trying a DROP DATABASE after
* this point will see us there.
*
* Note: use of RowExclusiveLock here is reasonable because we envision
* our session as being a concurrent writer of the database. If we had a
* way of declaring a session as being guaranteed-read-only, we could use
* AccessShareLock for such sessions and thereby not conflict against
* CREATE DATABASE.
*/
if (!bootstrap)
LockSharedObject(DatabaseRelationId, MyDatabaseId, 0,
RowExclusiveLock);
/*
* Recheck the flat file copy of pg_database to make sure the target
* database hasn't gone away. If there was a concurrent DROP DATABASE,
* this ensures we will die cleanly without creating a mess.
*/
if (!bootstrap)
{
Oid dbid2;
Oid tsid2;
if (!FindMyDatabase(dbname, &dbid2, &tsid2) ||
dbid2 != MyDatabaseId || tsid2 != MyDatabaseTableSpace)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
dbname),
errdetail("It seems to have just been dropped or renamed.")));
}
/*
* Now we should be able to access the database directory safely. Verify
* it's there and looks reasonable.
*/
if (!bootstrap)
{
if (access(fullpath, F_OK) == -1)
{
if (errno == ENOENT)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
dbname),
errdetail("The database subdirectory \"%s\" is missing.",
fullpath)));
else
ereport(FATAL,
(errcode_for_file_access(),
errmsg("could not access directory \"%s\": %m",
fullpath)));
}
ValidatePgVersion(fullpath);
}
/*
* It's now possible to do real access to the system catalogs.
*
* Load relcache entries for the system catalogs. This must create at
* least the minimum set of "nailed-in" cache entries.
*/
RelationCacheInitializePhase2();
/*
* Figure out our postgres user id, and see if we are a superuser.
*
* In standalone mode and in the autovacuum process, we use a fixed id,
* otherwise we figure it out from the authenticated user name.
*/
if (bootstrap || autovacuum)
{
InitializeSessionUserIdStandalone();
am_superuser = true;
}
else if (!IsUnderPostmaster)
{
InitializeSessionUserIdStandalone();
am_superuser = true;
if (!ThereIsAtLeastOneRole())
ereport(WARNING,
(errcode(ERRCODE_UNDEFINED_OBJECT),
errmsg("no roles are defined in this database system"),
errhint("You should immediately run CREATE USER \"%s\" CREATEUSER;.",
username)));
}
else
{
/* normal multiuser case */
InitializeSessionUserId(username);
am_superuser = superuser();
}
/* set up ACL framework (so CheckMyDatabase can check permissions) */
initialize_acl();
/*
* Read the real pg_database row for our database, check permissions and
* set up database-specific GUC settings. We can't do this until all the
* database-access infrastructure is up. (Also, it wants to know if the
* user is a superuser, so the above stuff has to happen first.)
*/
if (!bootstrap)
CheckMyDatabase(dbname, am_superuser);
/*
* If we're trying to shut down, only superusers can connect.
*/
if (!am_superuser &&
MyProcPort != NULL &&
MyProcPort->canAcceptConnections == CAC_WAITBACKUP)
ereport(FATAL,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
errmsg("must be superuser to connect during database shutdown")));
/*
* Check a normal user hasn't connected to a superuser reserved slot.
*/
if (!am_superuser &&
ReservedBackends > 0 &&
!HaveNFreeProcs(ReservedBackends))
ereport(FATAL,
(errcode(ERRCODE_TOO_MANY_CONNECTIONS),
errmsg("connection limit exceeded for non-superusers")));
/*
* Initialize various default states that can't be set up until we've
* selected the active user and gotten the right GUC settings.
*/
/* set default namespace search path */
InitializeSearchPath();
/* initialize client encoding */
InitializeClientEncoding();
/* report this backend in the PgBackendStatus array */
if (!bootstrap)
pgstat_bestart();
/* close the transaction we started above */
if (!bootstrap)
CommitTransactionCommand();
return am_superuser;
}
/* --------------------------------
* InitPostgres
* Initialize POSTGRES.
*
* The database can be specified by name, using the in_dbname parameter, or by
* OID, using the dboid parameter. In the latter case, the actual database
* name can be returned to the caller in out_dbname. If out_dbname isn't
* NULL, it must point to a buffer of size NAMEDATALEN.
*
* In bootstrap mode no parameters are used.
*
* The return value indicates whether the userID is a superuser. (That
* can only be tested inside a transaction, so we want to do it during
* the startup transaction rather than doing a separate one in postgres.c.)
*
* As of PostgreSQL 8.2, we expect InitProcess() was already called, so we
* already have a PGPROC struct ... but it's not filled in yet.
*
* Note:
* Be very careful with the order of calls in the InitPostgres function.
* --------------------------------
*/
void
InitPostgres(const char *in_dbname, Oid dboid, const char *username,
char *out_dbname)
{
bool bootstrap = IsBootstrapProcessingMode();
bool autovacuum = IsAutoVacuumProcess();
bool am_superuser;
char *fullpath;
char dbname[NAMEDATALEN];
/*
* Add my PGPROC struct to the ProcArray.
*
* Once I have done this, I am visible to other backends!
*/
InitProcessPhase2();
/* Initialize SessionState entry */
SessionState_Init();
/* Initialize memory protection */
GPMemoryProtect_Init();
/*
* Initialize my entry in the shared-invalidation manager's array of
* per-backend data.
*
* Sets up MyBackendId, a unique backend identifier.
*/
MyBackendId = InvalidBackendId;
SharedInvalBackendInit(false);
if (MyBackendId > MaxBackends || MyBackendId <= 0)
elog(FATAL, "bad backend id: %d", MyBackendId);
/* Now that we have a BackendId, we can participate in ProcSignal */
ProcSignalInit(MyBackendId);
/*
* bufmgr needs another initialization call too
*/
InitBufferPoolBackend();
/*
* Initialize local process's access to XLOG. In bootstrap case we may
* skip this since StartupXLOG() was run instead.
*/
if (!bootstrap)
InitXLOGAccess();
/*
* Initialize the relation cache and the system catalog caches. Note that
* no catalog access happens here; we only set up the hashtable structure.
* We must do this before starting a transaction because transaction abort
* would try to touch these hashtables.
*/
RelationCacheInitialize();
InitCatalogCache();
/* Initialize portal manager */
EnablePortalManager();
/* Initialize stats collection --- must happen before first xact */
if (!bootstrap)
pgstat_initialize();
/*
* Load relcache entries for the shared system catalogs. This must create
* at least entries for pg_database and catalogs used for authentication.
*/
RelationCacheInitializePhase2();
/*
* Set up process-exit callback to do pre-shutdown cleanup. This has to
* be after we've initialized all the low-level modules like the buffer
* manager, because during shutdown this has to run before the low-level
* modules start to close down. On the other hand, we want it in place
* before we begin our first transaction --- if we fail during the
* initialization transaction, as is entirely possible, we need the
* AbortTransaction call to clean up.
*/
on_shmem_exit(ShutdownPostgres, 0);
/* TODO: autovacuum launcher should be done here? */
/*
* Start a new transaction here before first access to db, and get a
* snapshot. We don't have a use for the snapshot itself, but we're
* interested in the secondary effect that it sets RecentGlobalXmin.
*/
if (!bootstrap)
{
StartTransactionCommand();
(void) GetTransactionSnapshot();
}
/*
* Figure out our postgres user id, and see if we are a superuser.
*
* In standalone mode and in the autovacuum process, we use a fixed id,
* otherwise we figure it out from the authenticated user name.
*/
if (bootstrap || autovacuum)
{
InitializeSessionUserIdStandalone();
am_superuser = true;
}
else if (!IsUnderPostmaster)
{
InitializeSessionUserIdStandalone();
am_superuser = true;
if (!ThereIsAtLeastOneRole())
ereport(WARNING,
(errcode(ERRCODE_UNDEFINED_OBJECT),
errmsg("no roles are defined in this database system"),
errhint("You should immediately run CREATE USER \"%s\" CREATEUSER;.",
username)));
}
else
{
/* normal multiuser case */
Assert(MyProcPort != NULL);
PerformAuthentication(MyProcPort);
InitializeSessionUserId(username);
am_superuser = superuser();
}
/*
* Check a normal user hasn't connected to a superuser reserved slot.
*/
if (!am_superuser &&
ReservedBackends > 0 &&
!HaveNFreeProcs(ReservedBackends))
ereport(FATAL,
(errcode(ERRCODE_TOO_MANY_CONNECTIONS),
errmsg("connection limit exceeded for non-superusers"),
errSendAlert(true)));
/*
* If walsender, we don't want to connect to any particular database. Just
* finish the backend startup by processing any options from the startup
* packet, and we're done.
*/
if (am_walsender)
{
Assert(!bootstrap);
/*
* We don't have replication role, which existed in postgres.
*/
if (!superuser())
ereport(FATAL,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
errmsg("must be superuser role to start walsender")));
/* process any options passed in the startup packet */
if (MyProcPort != NULL)
process_startup_options(MyProcPort, am_superuser);
/* Apply PostAuthDelay as soon as we've read all options */
if (PostAuthDelay > 0)
pg_usleep(PostAuthDelay * 1000000L);
/* initialize client encoding */
InitializeClientEncoding();
/* report this backend in the PgBackendStatus array */
pgstat_bestart();
/* close the transaction we started above */
CommitTransactionCommand();
return;
}
/*
* Set up the global variables holding database id and path. But note we
* won't actually try to touch the database just yet.
*
* We take a shortcut in the bootstrap case, otherwise we have to look up
* the db name in pg_database.
*/
if (bootstrap)
{
MyDatabaseId = TemplateDbOid;
MyDatabaseTableSpace = DEFAULTTABLESPACE_OID;
}
else if (in_dbname != NULL)
{
HeapTuple tuple;
Form_pg_database dbform;
tuple = GetDatabaseTuple(in_dbname);
if (!HeapTupleIsValid(tuple))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist", in_dbname)));
dbform = (Form_pg_database) GETSTRUCT(tuple);
MyDatabaseId = HeapTupleGetOid(tuple);
MyDatabaseTableSpace = dbform->dattablespace;
/* take database name from the caller, just for paranoia */
strlcpy(dbname, in_dbname, sizeof(dbname));
pfree(tuple);
}
else
{
/* caller specified database by OID */
HeapTuple tuple;
Form_pg_database dbform;
tuple = GetDatabaseTupleByOid(dboid);
if (!HeapTupleIsValid(tuple))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database %u does not exist", dboid)));
dbform = (Form_pg_database) GETSTRUCT(tuple);
MyDatabaseId = HeapTupleGetOid(tuple);
MyDatabaseTableSpace = dbform->dattablespace;
Assert(MyDatabaseId == dboid);
strlcpy(dbname, NameStr(dbform->datname), sizeof(dbname));
/* pass the database name back to the caller */
if (out_dbname)
strcpy(out_dbname, dbname);
pfree(tuple);
}
/* Now we can mark our PGPROC entry with the database ID */
/* (We assume this is an atomic store so no lock is needed) */
MyProc->databaseId = MyDatabaseId;
/*
* Now, take a writer's lock on the database we are trying to connect to.
* If there is a concurrently running DROP DATABASE on that database, this
* will block us until it finishes (and has committed its update of
* pg_database).
*
* Note that the lock is not held long, only until the end of this startup
* transaction. This is OK since we are already advertising our use of
* the database in the PGPROC array; anyone trying a DROP DATABASE after
* this point will see us there.
*
* Note: use of RowExclusiveLock here is reasonable because we envision
* our session as being a concurrent writer of the database. If we had a
* way of declaring a session as being guaranteed-read-only, we could use
* AccessShareLock for such sessions and thereby not conflict against
* CREATE DATABASE.
*/
if (!bootstrap)
LockSharedObject(DatabaseRelationId, MyDatabaseId, 0,
RowExclusiveLock);
/*
* Recheck pg_database to make sure the target database hasn't gone away.
* If there was a concurrent DROP DATABASE, this ensures we will die
* cleanly without creating a mess.
*/
if (!bootstrap)
{
HeapTuple tuple;
tuple = GetDatabaseTuple(dbname);
if (!HeapTupleIsValid(tuple) ||
MyDatabaseId != HeapTupleGetOid(tuple) ||
MyDatabaseTableSpace != ((Form_pg_database) GETSTRUCT(tuple))->dattablespace)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist", dbname),
errdetail("It seems to have just been dropped or renamed.")));
}
fullpath = GetDatabasePath(MyDatabaseId, MyDatabaseTableSpace);
if (!bootstrap)
{
if (access(fullpath, F_OK) == -1)
{
if (errno == ENOENT)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
dbname),
errdetail("The database subdirectory \"%s\" is missing.",
fullpath)));
else
ereport(FATAL,
(errcode_for_file_access(),
errmsg("could not access directory \"%s\": %m",
fullpath)));
}
ValidatePgVersion(fullpath);
}
SetDatabasePath(fullpath);
/*
* It's now possible to do real access to the system catalogs.
*
* Load relcache entries for the system catalogs. This must create at
* least the minimum set of "nailed-in" cache entries.
*/
RelationCacheInitializePhase3();
/*
* Now we have full access to catalog including toast tables,
* we can process pg_authid.rolconfig. This ought to come before
* processing startup options so that it can override the settings.
*/
if (!bootstrap)
ProcessRoleGUC();
/* set up ACL framework (so CheckMyDatabase can check permissions) */
initialize_acl();
/*
* Re-read the pg_database row for our database, check permissions and set
* up database-specific GUC settings. We can't do this until all the
* database-access infrastructure is up. (Also, it wants to know if the
* user is a superuser, so the above stuff has to happen first.)
*/
if (!bootstrap)
CheckMyDatabase(dbname, am_superuser);
/*
* Now process any command-line switches and any additional GUC variable
* settings passed in the startup packet. We couldn't do this before
* because we didn't know if client is a superuser.
*/
if (MyProcPort != NULL)
process_startup_options(MyProcPort, am_superuser);
/*
* Maintenance Mode: allow superuser to connect when
* gp_maintenance_conn GUC is set. We cannot check it until
* process_startup_options parses the GUC.
*/
if (gp_maintenance_mode && Gp_role == GP_ROLE_DISPATCH &&
!(superuser() && gp_maintenance_conn))
ereport(FATAL,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
errmsg("maintenance mode: connected by superuser only"),
errSendAlert(false)));
/*
* MPP: If we were started in utility mode then we only want to allow
* incoming sessions that specify gp_session_role=utility as well. This
* lets the bash scripts start the QD in utility mode and connect in but
* protect ourselves from normal clients who might be trying to connect to
* the system while we startup.
*/
if ((Gp_role == GP_ROLE_UTILITY) && (Gp_session_role != GP_ROLE_UTILITY))
{
ereport(FATAL,
(errcode(ERRCODE_CANNOT_CONNECT_NOW),
errmsg("System was started in master-only utility mode - only utility mode connections are allowed")));
}
/* Apply PostAuthDelay as soon as we've read all options */
if (PostAuthDelay > 0)
pg_usleep(PostAuthDelay * 1000000L);
/* set default namespace search path */
InitializeSearchPath();
/* initialize client encoding */
InitializeClientEncoding();
/* report this backend in the PgBackendStatus array */
if (!bootstrap)
pgstat_bestart();
/*
* MPP package setup
*
* Primary function is to establish connctions to the qExecs.
* This is SKIPPED when the database is in bootstrap mode or
* Is not UnderPostmaster.
*/
if (!bootstrap && IsUnderPostmaster)
{
cdb_setup();
on_proc_exit( cdb_cleanup, 0 );
}
/*
* MPP SharedSnapshot Setup
*/
if (Gp_role == GP_ROLE_DISPATCH)
{
addSharedSnapshot("Query Dispatcher", gp_session_id);
}
else if (Gp_role == GP_ROLE_DISPATCHAGENT)
{
SharedLocalSnapshotSlot = NULL;
}
else if (Gp_segment == -1 && Gp_role == GP_ROLE_EXECUTE && !Gp_is_writer)
{
/*
* Entry db singleton QE is a user of the shared snapshot -- not a creator.
* The lookup will occur once the distributed snapshot has been received.
*/
lookupSharedSnapshot("Entry DB Singleton", "Query Dispatcher", gp_session_id);
}
else if (Gp_role == GP_ROLE_EXECUTE)
{
if (Gp_is_writer)
{
addSharedSnapshot("Writer qExec", gp_session_id);
}
else
{
/*
* NOTE: This assumes that the Slot has already been
* allocated by the writer. Need to make sure we
* always allocate the writer qExec first.
*/
lookupSharedSnapshot("Reader qExec", "Writer qExec", gp_session_id);
}
}
/* close the transaction we started above */
if (!bootstrap)
CommitTransactionCommand();
return;
}
/* --------------------------------
* InitPostgres
* Initialize POSTGRES.
*
* Note:
* Be very careful with the order of calls in the InitPostgres function.
* --------------------------------
*/
void
InitPostgres(const char *dbname, const char *username)
{
bool bootstrap = IsBootstrapProcessingMode();
/*
* Set up the global variables holding database id and path.
*
* We take a shortcut in the bootstrap case, otherwise we have to look up
* the db name in pg_database.
*/
if (bootstrap)
{
MyDatabaseId = TemplateDbOid;
SetDatabasePath(GetDatabasePath(MyDatabaseId));
}
else
{
char *fullpath,
datpath[MAXPGPATH];
/*
* Formerly we validated DataDir here, but now that's done
* earlier.
*/
/*
* Find oid and path of the database we're about to open. Since
* we're not yet up and running we have to use the hackish
* GetRawDatabaseInfo.
*/
GetRawDatabaseInfo(dbname, &MyDatabaseId, datpath);
if (!OidIsValid(MyDatabaseId))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
dbname)));
fullpath = GetDatabasePath(MyDatabaseId);
/* Verify the database path */
if (access(fullpath, F_OK) == -1)
{
if (errno == ENOENT)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
dbname),
errdetail("The database subdirectory \"%s\" is missing.",
fullpath)));
else
ereport(FATAL,
(errcode_for_file_access(),
errmsg("could not access directory \"%s\": %m",
fullpath)));
}
ValidatePgVersion(fullpath);
if (chdir(fullpath) == -1)
ereport(FATAL,
(errcode_for_file_access(),
errmsg("could not change directory to \"%s\": %m",
fullpath)));
SetDatabasePath(fullpath);
}
/*
* Code after this point assumes we are in the proper directory!
*/
/*
* Set up my per-backend PGPROC struct in shared memory. (We need
* to know MyDatabaseId before we can do this, since it's entered into
* the PGPROC struct.)
*/
InitProcess();
/*
* Initialize my entry in the shared-invalidation manager's array of
* per-backend data. (Formerly this came before InitProcess, but now
* it must happen after, because it uses MyProc.) Once I have done
* this, I am visible to other backends!
*
* Sets up MyBackendId, a unique backend identifier.
*/
MyBackendId = InvalidBackendId;
InitBackendSharedInvalidationState();
if (MyBackendId > MaxBackends || MyBackendId <= 0)
elog(FATAL, "bad backend id: %d", MyBackendId);
/*
* Initialize the transaction system override state.
*/
AmiTransactionOverride(bootstrap);
/*
* Initialize the relation descriptor cache. This must create at
* least the minimum set of "nailed-in" cache entries. No catalog
* access happens here.
*/
RelationCacheInitialize();
/*
* Initialize all the system catalog caches. Note that no catalog
* access happens here; we only set up the cache structure.
*/
InitCatalogCache();
/* Initialize portal manager */
EnablePortalManager();
/*
* Initialize the deferred trigger manager --- must happen before
* first transaction start.
*/
DeferredTriggerInit();
/* start a new transaction here before access to db */
if (!bootstrap)
StartTransactionCommand();
/*
* It's now possible to do real access to the system catalogs.
*
* Replace faked-up relcache entries with correct info.
*/
RelationCacheInitializePhase2();
/*
* Figure out our postgres user id. In standalone mode we use a fixed
* id, otherwise we figure it out from the authenticated user name.
*/
if (bootstrap)
InitializeSessionUserIdStandalone();
else if (!IsUnderPostmaster)
{
InitializeSessionUserIdStandalone();
if (!ThereIsAtLeastOneUser())
ereport(WARNING,
(errcode(ERRCODE_UNDEFINED_OBJECT),
errmsg("no users are defined in this database system"),
errhint("You should immediately run CREATE USER \"%s\" WITH SYSID %d CREATEUSER;.",
username, BOOTSTRAP_USESYSID)));
}
else
{
/* normal multiuser case */
InitializeSessionUserId(username);
}
/*
* Unless we are bootstrapping, double-check that InitMyDatabaseInfo()
* got a correct result. We can't do this until all the
* database-access infrastructure is up.
*/
if (!bootstrap)
ReverifyMyDatabase(dbname);
/*
* Final phase of relation cache startup: write a new cache file if
* necessary. This is done after ReverifyMyDatabase to avoid writing
* a cache file into a dead database.
*/
RelationCacheInitializePhase3();
/*
* Check a normal user hasn't connected to a superuser reserved slot.
* We can't do this till after we've read the user information, and we
* must do it inside a transaction since checking superuserness may
* require database access. The superuser check is probably the most
* expensive part; don't do it until necessary.
*/
if (ReservedBackends > 0 &&
CountEmptyBackendSlots() < ReservedBackends &&
!superuser())
ereport(FATAL,
(errcode(ERRCODE_TOO_MANY_CONNECTIONS),
errmsg("connection limit exceeded for non-superusers")));
/*
* Initialize various default states that can't be set up until we've
* selected the active user and done ReverifyMyDatabase.
*/
/* set default namespace search path */
InitializeSearchPath();
/* initialize client encoding */
InitializeClientEncoding();
/*
* Now all default states are fully set up. Report them to client if
* appropriate.
*/
BeginReportingGUCOptions();
/*
* Set up process-exit callback to do pre-shutdown cleanup. This
* should be last because we want shmem_exit to call this routine
* before the exit callbacks that are registered by buffer manager,
* lock manager, etc. We need to run this code before we close down
* database access!
*/
on_shmem_exit(ShutdownPostgres, 0);
/* close the transaction we started above */
if (!bootstrap)
CommitTransactionCommand();
}