//! @breif This function checks the specific request and if known then processes it
//!
//! @param type corresponding at bmRequestType (see USB specification)
//! @param request corresponding at bRequest (see USB specification)
//!
//! @return TRUE, when the request is processed
//! @return FALSE, if the request is'nt know (STALL handshake is managed by the main standard request function).
//!
Bool usb_user_read_request(U8 type, U8 request)
{
U16 wInterface;
U8 wValue_msb;
U8 wValue_lsb;
// Read wValue
wValue_lsb = Usb_read_byte();
wValue_msb = Usb_read_byte();
//** Specific request from Class MassStorage
if( USB_SETUP_SET_CLASS_INTER == type )
{
switch( request )
{
case SETUP_MASS_STORAGE_RESET:
// wValue must be 0
// wIndex = Interface
if( (0!=wValue_lsb) || (0!=wValue_msb) )
break;
LSB(wInterface)=Usb_read_byte();
MSB(wInterface)=Usb_read_byte();
if( INTERFACE_NB != wInterface )
break;
Usb_ack_receive_setup();
Usb_send_control_in();
while(!Is_usb_in_ready());
return TRUE;
break;
}
}
if( USB_SETUP_GET_CLASS_INTER == type )
{
switch( request )
{
case SETUP_MASS_STORAGE_GET_MAX_LUN:
// wValue must be 0
// wIndex = Interface
if( (0!=wValue_lsb) || (0!=wValue_msb) )
break;
LSB(wInterface)=Usb_read_byte();
MSB(wInterface)=Usb_read_byte();
if( INTERFACE_NB != wInterface )
break;
Usb_ack_receive_setup();
Usb_write_byte( (get_nb_lun()-1) );
Usb_send_control_in();
while(!Is_usb_in_ready());
while( !Is_usb_receive_out() );
Usb_ack_receive_out();
ms_multiple_drive = 1;
return TRUE;
break;
}
}
return FALSE; // No supported request
}
void sd_mmc_mci_read_multiple_sector_callback(const void *psector)
{
#ifdef USB_DEVICE_VENDOR_ID
// USB Device Stack V2
udi_msc_trans_block( true, (uint8_t*)psector, SD_MMC_SECTOR_SIZE, NULL);
#else
// USB Device Stack V1
uint16_t data_to_transfer = SD_MMC_SECTOR_SIZE;
// Transfer read sector to the USB interface.
while (data_to_transfer)
{
while (!Is_usb_in_ready(g_scsi_ep_ms_in))
{
if(!Is_usb_endpoint_enabled(g_scsi_ep_ms_in))
return; // USB Reset
}
Usb_reset_endpoint_fifo_access(g_scsi_ep_ms_in);
data_to_transfer = usb_write_ep_txpacket(g_scsi_ep_ms_in, psector,
data_to_transfer, &psector);
Usb_ack_in_ready_send(g_scsi_ep_ms_in);
}
#endif
}
//!
//! @brief USB Command Status Wrapper (CSW) management
//!
//! This function sends the status in relation with the last CBW.
//!
static void usb_mass_storage_csw(void)
{
while (Is_usb_endpoint_stall_requested(EP_MS_IN))
{
if (Is_usb_setup_received()) usb_process_request();
}
while (Is_usb_endpoint_stall_requested(EP_MS_OUT))
{
if (Is_usb_setup_received()) usb_process_request();
}
while (!Is_usb_in_ready(EP_MS_IN));
Usb_reset_endpoint_fifo_access(EP_MS_IN);
//! Write CSW Signature
Usb_write_endpoint_data(EP_MS_IN, 32, *(U32 *)&"USBS");
//! Write stored CBW Tag
Usb_write_endpoint_data(EP_MS_IN, 32, dCBWTag);
//! Write data residual value
Usb_write_endpoint_data(EP_MS_IN, 32,
usb_format_mcu_to_usb_data(32, g_scsi_data_remaining));
//! Write command status
Usb_write_endpoint_data(EP_MS_IN, 8, g_scsi_status);
Usb_ack_in_ready_send(EP_MS_IN);
}
void sendKeys(u8* buffer)
{
u32 i;
#ifdef NOT_USED
if (bDeviceState == CONFIGURED)
{
while(!PrevXferComplete);
PrevXferComplete = 0;
/* Use the memory interface function to write to the selected endpoint */
UserToPMABufferCopy(buffer, ENDP4_TXADDR, 8);
/* Update the data length in the control register */
SetEPTxCount(ENDP4, 8);
SetEPTxStatus (ENDP4, EP_TX_VALID);
}
#endif
while (Is_usb_endpoint_stall_requested(EP_KB_IN))
{
if (Is_usb_setup_received())
{
usb_process_request();
}
}
// MSC Compliance - Free BAD out receive during SCSI command
while( Is_usb_out_received(EP_CCID_OUT) ) {
Usb_ack_out_received_free(EP_CCID_OUT);
}
while (!Is_usb_in_ready(EP_KB_IN))
{
if(!Is_usb_endpoint_enabled(EP_KB_IN))
{
i = 0; // todo USB Reset
}
}
Usb_reset_endpoint_fifo_access(EP_KB_IN);
/*
Usb_write_endpoint_data(EP_KB_IN, 8, 'D');
Usb_write_endpoint_data(EP_KB_IN, 8, 'D');
Usb_write_endpoint_data(EP_KB_IN, 8, 'D');
Usb_write_endpoint_data(EP_KB_IN, 8, 'D');
*/
usb_write_ep_txpacket(EP_KB_IN, buffer, 8, NULL);
// Usb_send_in(EP_CONTROL);
Usb_ack_in_ready_send(EP_KB_IN);
// MSC Compliance - Wait end of all transmitions on USB line
while( 0 != Usb_nb_busy_bank(EP_KB_IN) )
{
if (Is_usb_setup_received()) usb_process_request();
}
}
//! @brief Send data report to Host
//!
void hid_report_in(void)
{
int joy =0;
char* ptr_cram=txbuf;
int data_to_transfer=0;
if(!Is_usb_write_enabled(EP_HID_GENERIC_IN))
return; // Not ready to send report
// Build the Joystick report
if(is_joystick_up()|| is_joystick_down() || is_joystick_right() || is_joystick_left() ) //! Check for UP event
{
joy=0x01;
}
if(joy==last_joy) {
return; // Same report then no send report
}
last_joy=joy;
memset(txbuf, 0, RXBUF_SIZE);
txbuf[0] = joy;
// Send report
data_to_transfer = sizeof(txbuf);
while (data_to_transfer)
{
while (!Is_usb_in_ready(EP_HID_GENERIC_IN));
Usb_reset_endpoint_fifo_access(EP_HID_GENERIC_IN);
data_to_transfer = usb_write_ep_txpacket(EP_HID_GENERIC_IN, ptr_cram, data_to_transfer, (const void**)&ptr_cram);
Usb_ack_in_ready_send(EP_HID_GENERIC_IN);
}
}
static void USB_CCID_SendDataToUSB (void)
{
int USB_Datalen_s32;
int i;
while (Is_usb_endpoint_stall_requested (EP_CCID_IN))
{
if (Is_usb_setup_received ())
usb_process_request ();
}
while (Is_usb_endpoint_stall_requested (EP_CCID_OUT))
{
if (Is_usb_setup_received ())
usb_process_request ();
}
// MSC Compliance - Free BAD out receive during SCSI command
while (Is_usb_out_received (EP_CCID_OUT))
{
Usb_ack_out_received_free (EP_CCID_OUT);
}
while (!Is_usb_in_ready (EP_CCID_IN))
{
if (!Is_usb_endpoint_enabled (EP_CCID_IN))
{
i = 0; // todo USB Reset
}
}
Usb_reset_endpoint_fifo_access (EP_CCID_IN);
USB_Datalen_s32 = USB_CCID_data_st.CCID_datalen + 10;
for (i = 0; i < USB_Datalen_s32; i++)
{
Usb_write_endpoint_data (EP_CCID_IN, 8, USB_CCID_data_st.USB_data[i]);
}
Usb_ack_in_ready_send (EP_CCID_IN);
USB_Log_st.CCID_ReadCalls_u32++;
USB_Log_st.CCID_BytesRead_u32 += USB_Datalen_s32;
// MSC Compliance - Wait end of all transmitions on USB line
while (0 != Usb_nb_busy_bank (EP_CCID_IN))
{
if (Is_usb_setup_received ())
usb_process_request ();
}
}
//! usb_set_address.
//!
//! This function manages the SET ADDRESS request. When complete, the device
//! will filter the requests using the new address.
//!
//! @warning Code:xx bytes (function code length)
//!
//! @param none
//!
//! @return none
//!
void usb_set_address(void)
{
Usb_configure_address(Usb_read_byte());
Usb_ack_receive_setup();
Usb_send_control_in(); //!< send a ZLP for STATUS phase
while(!Is_usb_in_ready()); //!< waits for status phase done
//!< before using the new address
Usb_enable_address();
}
void sd_mmc_spi_read_multiple_sector_callback(const void *psector)
{
U16 data_to_transfer = MMC_SECTOR_SIZE;
while (data_to_transfer)
{
while (!Is_usb_in_ready(g_scsi_ep_ms_in));
Usb_reset_endpoint_fifo_access(g_scsi_ep_ms_in);
data_to_transfer = usb_write_ep_txpacket(g_scsi_ep_ms_in, psector,
data_to_transfer, &psector);
Usb_ack_in_ready_send(g_scsi_ep_ms_in);
}
}
//! @brief This function manages hid set idle request.
//!
//! @param Duration When the upper byte of wValue is 0 (zero), the duration is indefinite else from 0.004 to 1.020 seconds
//! @param Report ID 0 the idle rate applies to all input reports, else only applies to the Report ID
//!
void usb_hid_set_idle (U8 u8_report_id, U8 u8_duration )
{
U16 wInterface;
// Get interface number to put in idle mode
LSB(wInterface)=Usb_read_byte();
MSB(wInterface)=Usb_read_byte();
Usb_ack_receive_setup();
g_u8_report_rate = u8_duration;
Usb_send_control_in();
while(!Is_usb_in_ready());
}
//!
//! @brief USB Command Status Wrapper (CSW) management
//!
//! This function sends the status in relation with the last CBW.
//!
static void usb_mass_storage_csw(void)
{
while (Is_usb_endpoint_stall_requested(EP_MS_IN))
{
if (Is_usb_setup_received()) usb_process_request();
}
while (Is_usb_endpoint_stall_requested(EP_MS_OUT))
{
if (Is_usb_setup_received()) usb_process_request();
}
// MSC Compliance - Free BAD out receive during SCSI command
while( Is_usb_out_received(EP_MS_OUT) ) {
Usb_ack_out_received_free(EP_MS_OUT);
}
while (!Is_usb_in_ready(EP_MS_IN));
Usb_reset_endpoint_fifo_access(EP_MS_IN);
//! Write CSW Signature
Usb_write_endpoint_data(EP_MS_IN, 32, *(U32 *)&"USBS");
//! Write stored CBW Tag
Usb_write_endpoint_data(EP_MS_IN, 32, dCBWTag);
//! Write data residual value
Usb_write_endpoint_data(EP_MS_IN, 32,
usb_format_mcu_to_usb_data(32, g_scsi_data_remaining));
//! Write command status
Usb_write_endpoint_data(EP_MS_IN, 8, g_scsi_status);
Usb_ack_in_ready_send(EP_MS_IN);
// MSC Compliance - Wait end of all transmissions on USB line
while( 0 != Usb_nb_busy_bank(EP_MS_IN) )
{
if (Is_usb_setup_received()) usb_process_request();
}
// Release the USB Mutex.
if( true == xGiveUsbMutex )
{
x_supervisor_SemaphoreGive( xUSBMutex );
}
}
//! usb_set_configuration.
//!
//! This function manages the SET CONFIGURATION request. If the selected
//! configuration is valid, this function call the usb_user_endpoint_init()
//! function that will configure the endpoints following the configuration
//! number.
//!
//! @warning Code:xx bytes (function code length)
//!
void usb_set_configuration( void )
{
U8 configuration_number;
configuration_number = Usb_read_byte();
// TODO: Verify configuration_number!
Usb_ack_receive_setup();
usb_configuration_nb = configuration_number;
Usb_send_control_in(); //!< send a ZLP for STATUS phase
while(!Is_usb_in_ready());
usb_user_endpoint_init(usb_configuration_nb); //!< endpoint configuration
Usb_set_configuration_action();
}
//!
//! @brief Entry point of the device HID task management
//!
void device_hid_task(void)
{
// First, check the device enumeration state
if (!Is_device_enumerated()) {
return;
}
if (Is_usb_in_ready(EP_KBD_IN)) {
if (is_usb_hid_event()) {
Usb_reset_endpoint_fifo_access(EP_KBD_IN);
//! Write report
Usb_write_endpoint_data(EP_KBD_IN, 8, key);
Usb_ack_in_ready_send(EP_KBD_IN);
}
}
}
void at45dbx_read_multiple_sector_callback(const void *psector)
{
U16 data_to_transfer = AT45DBX_SECTOR_SIZE;
// Transfer read sector to the USB interface.
while (data_to_transfer)
{
while (!Is_usb_in_ready(g_scsi_ep_ms_in))
{
if(!Is_usb_endpoint_enabled(g_scsi_ep_ms_in))
return; // USB Reset
}
Usb_reset_endpoint_fifo_access(g_scsi_ep_ms_in);
data_to_transfer = usb_write_ep_txpacket(g_scsi_ep_ms_in, psector,
data_to_transfer, &psector);
Usb_ack_in_ready_send(g_scsi_ep_ms_in);
}
}
void usb_hid_set_report_feature(void)
{
Usb_ack_receive_setup();
Usb_send_control_in();
while(!Is_usb_receive_out());
if(Usb_read_byte()==0x55)
if(Usb_read_byte()==0xAA)
if(Usb_read_byte()==0x55)
if(Usb_read_byte()==0xAA)
{
jump_bootloader=1;
}
Usb_ack_receive_out();
Usb_send_control_in();
while(!Is_usb_in_ready());
}
void sd_mmc_spi_read_multiple_sector_callback(const void *psector)
{
#ifdef USB_DEVICE_VENDOR_ID
// USB Device Stack V2
udi_msc_trans_block( true, (uint8_t*)psector, MMC_SECTOR_SIZE, NULL);
#else
// USB Device Stack V1
uint16_t data_to_transfer = MMC_SECTOR_SIZE;
while (data_to_transfer)
{
while (!Is_usb_in_ready(g_scsi_ep_ms_in));
Usb_reset_endpoint_fifo_access(g_scsi_ep_ms_in);
data_to_transfer = usb_write_ep_txpacket(g_scsi_ep_ms_in, psector,
data_to_transfer, &psector);
Usb_ack_in_ready_send(g_scsi_ep_ms_in);
}
#endif
}
//! usb_set_interface.
//!
//! TThis function manages the SET_INTERFACE request.
//!
//! @warning Code:xx bytes (function code length)
//!
void usb_set_interface (void)
{
U8 alt_setting;
U8 dummy;
U8 interface;
alt_setting = Usb_read_byte();
dummy = Usb_read_byte();
interface = Usb_read_byte();
if(usb_user_set_alt_interface(interface, alt_setting)) {
Usb_ack_receive_setup();
Usb_send_control_in(); //!< send a ZLP for STATUS phase
while(!Is_usb_in_ready());
usb_endpoint_wait_for_receive_out();
Usb_ack_receive_out();
}
}
void USB_CCID_send_INT_Message (void)
{
unsigned short Message_u16;
int i, i1;
/* todo while (Is_usb_endpoint_stall_requested(EP_CCID_IN)) { if (Is_usb_setup_received()) usb_process_request(); }
while (Is_usb_endpoint_stall_requested(EP_CCID_OUT)) { if (Is_usb_setup_received()) usb_process_request(); }
// MSC Compliance - Free BAD out receive during SCSI command while( Is_usb_out_received(EP_CCID_OUT) ) {
Usb_ack_out_received_free(EP_CCID_OUT); } */
while (!Is_usb_in_ready (EP_CCID_INT));
Usb_reset_endpoint_fifo_access (EP_CCID_INT);
Message_u16 = 0x5003;
i = Usb_byte_count (EP_CCID_INT);
Usb_write_endpoint_data (EP_CCID_INT, 16, Message_u16);
i1 = Usb_byte_count (EP_CCID_INT);
Usb_ack_in_ready_send (EP_CCID_INT);
// MSC Compliance - Wait end of all transmitions on USB line
for (i = 0; i < 100; i++)
{
if (0 != Usb_nb_busy_bank (EP_CCID_INT))
{
if (Is_usb_setup_received ())
usb_process_request ();
}
else
{
break;
}
}
}
Bool sbc_inquiry (void)
{
U8 allocation_length;
DelayMs (2);
// CMDT or EPVD bit is not 0 or PAGE or OPERATION CODE fields != 0x00.
if ((g_scsi_command[1] & 0x03) || g_scsi_command[2])
{
sbc_lun_status_is_cdb_field ();
return FALSE;
}
// Send standard INQUIRY data (bytes 0 to (allocation_length - 1)).
allocation_length = min (g_scsi_command[4], sizeof (sbc_st_std_inquiry_data));
if (allocation_length != 0)
{
while (!Is_usb_in_ready (g_scsi_ep_ms_in))
{
if (!Is_usb_endpoint_enabled (g_scsi_ep_ms_in))
return FALSE; // USB Reset
}
Usb_reset_endpoint_fifo_access (g_scsi_ep_ms_in);
usb_write_ep_txpacket (g_scsi_ep_ms_in, &sbc_std_inquiry_data, allocation_length, NULL);
Sbc_valid_write_usb (allocation_length);
// MSC Compliance - Wait end of all transmitions on USB line, because a stall may be send after data
while (0 != Usb_nb_busy_bank (EP_MS_IN));
}
sbc_lun_status_is_good ();
if (allocation_length > g_scsi_command[4]) // Not enough space
{
return (FALSE);
}
return (TRUE);
}
void device_mouse_hid_task(void)
#endif
{
#ifdef FREERTOS_USED
portTickType xLastWakeTime;
xLastWakeTime = xTaskGetTickCount();
while (true)
{
vTaskDelayUntil(&xLastWakeTime, configTSK_USB_DHID_MOUSE_PERIOD);
// First, check the device enumeration state
if (!Is_device_enumerated()) continue;
#else
// First, check the device enumeration state
if (!Is_device_enumerated()) return;
#endif // FREERTOS_USED
if( is_usb_mouse_event() )
{
if( Is_usb_in_ready(EP_HID_MOUSE_IN) )
{
Usb_reset_endpoint_fifo_access(EP_HID_MOUSE_IN);
//! Write report
Usb_write_endpoint_data(EP_HID_MOUSE_IN, 8, u8_report_buttons);
Usb_write_endpoint_data(EP_HID_MOUSE_IN, 8, u8_report_disp_x);
Usb_write_endpoint_data(EP_HID_MOUSE_IN, 8, u8_report_disp_y);
Usb_write_endpoint_data(EP_HID_MOUSE_IN, 8, u8_report_disp_wheel);
Usb_ack_in_ready_send(EP_HID_MOUSE_IN);
}
}
#ifdef FREERTOS_USED
}
#endif
}
bool USB::canSend()
{
Usb_select_endpoint(EP_TEMP_IN);
return Is_usb_in_ready();
}
void device_template_task(void)
#endif
{
static U8 buf[EP_SIZE_TEMP2];
#ifdef FREERTOS_USED
portTickType xLastWakeTime;
xLastWakeTime = xTaskGetTickCount();
while (true)
{
vTaskDelayUntil(&xLastWakeTime, configTSK_USB_DTP_PERIOD);
// First, check the device enumeration state
if (!Is_device_enumerated()) continue;
#else
// First, check the device enumeration state
if (!Is_device_enumerated()) return;
#endif // FREERTOS_USED
// HERE STARTS THE USB DEVICE APPLICATIVE CODE
// The example below just performs a loopback transmission/reception.
// All data received with the OUT endpoint is stored in a RAM buffer and
// sent back to the IN endpoint.
#if BOARD == EVK1100
// For example, display Start-of-Frame counter on LEDs
LED_Display_Field(LED_MONO0_GREEN |
LED_MONO1_GREEN |
LED_MONO2_GREEN |
LED_MONO3_GREEN,
sof_cnt >> 5);
#elif BOARD == EVK1101 || BOARD == UC3C_EK || BOARD == EVK1104 || BOARD == EVK1105
// For example, display Start-of-Frame counter on LEDs
LED_Display_Field(LED0 |
LED1,
sof_cnt >> 5);
#else
#error The display of the SOFs must be defined here.
#endif
// If we receive something in the OUT endpoint, just store it in the RAM buffer
if (Is_usb_out_received(EP_TEMP_OUT))
{
LED_On(LED_APPLI_1);
Usb_reset_endpoint_fifo_access(EP_TEMP_OUT);
data_length = Usb_byte_count(EP_TEMP_OUT);
usb_read_ep_rxpacket(EP_TEMP_OUT, buf, data_length, NULL);
Usb_ack_out_received_free(EP_TEMP_OUT);
LED_Off(LED_APPLI_1);
}
// Load the IN endpoint with the contents of the RAM buffer
if (data_length && Is_usb_in_ready(EP_TEMP_IN))
{
LED_On(LED_APPLI_0);
Usb_reset_endpoint_fifo_access(EP_TEMP_IN);
usb_write_ep_txpacket(EP_TEMP_IN, buf, data_length, NULL);
data_length = 0;
Usb_ack_in_ready_send(EP_TEMP_IN);
LED_Off(LED_APPLI_0);
}
#ifdef FREERTOS_USED
}
#endif
}
void my_usb_ep1_int_action(void){
Usb_select_endpoint(TX_EP);
if(Is_usb_in_ready() && Is_usb_in_ready_interrupt_enabled()){
my_uart_usb_send_to_endpoint();
}
}
void device_full_custom_task(void)
#endif
{
U32 time=0;
bool startup=true;
#ifdef FREERTOS_USED
portTickType xLastWakeTime;
xLastWakeTime = xTaskGetTickCount();
while (true)
{
vTaskDelayUntil(&xLastWakeTime, configTSK_USB_DFC_PERIOD);
if( startup )
{
time+=configTSK_USB_DFC_PERIOD;
#define STARTUP_LED_DELAY 100
if ( time== 1*STARTUP_LED_DELAY ) LED_On( LED_MONO0_GREEN );
else if( time== 2*STARTUP_LED_DELAY ) LED_On( LED_MONO1_GREEN );
else if( time== 3*STARTUP_LED_DELAY ) LED_On( LED_MONO2_GREEN );
else if( time== 4*STARTUP_LED_DELAY ) LED_On( LED_MONO3_GREEN );
else if( time== 5*STARTUP_LED_DELAY ) LED_Off( LED_MONO0_GREEN );
else if( time== 6*STARTUP_LED_DELAY ) LED_Off( LED_MONO1_GREEN );
else if( time== 7*STARTUP_LED_DELAY ) LED_Off( LED_MONO2_GREEN );
else if( time== 8*STARTUP_LED_DELAY ) LED_Off( LED_MONO3_GREEN );
else if( time== 9*STARTUP_LED_DELAY ) startup=false;
}
// First, check the device enumeration state
if (!Is_device_enumerated()) continue;
#else
// First, check the device enumeration state
if (!Is_device_enumerated()) return;
#endif // FREERTOS_USED
if(Is_usb_out_received(EP_FC_OUT))
{
U32 nchar;
Usb_reset_endpoint_fifo_access(EP_FC_OUT);
memset(rxbuf, 0, RXBUF_SIZE);
usb_read_ep_rxpacket(EP_FC_OUT, &rxbuf, RXBUF_SIZE, NULL);
Usb_ack_out_received_free(EP_FC_OUT);
//printf("Received %s\n\r", rxbuf);
if( !strcmp((const char*)rxbuf, "get_sensor_value sensor=temp") )
{ // Temperature sensor
nchar=build_answer(txbuf, "temp");
b_temperature_get_value( txbuf+nchar );
b_report_pending=true;
}
else if( !strcmp((const char*)rxbuf, "get_sensor_value sensor=js") )
{ // Joystick
nchar=build_answer(txbuf, "js");
b_joystick_get_value( txbuf+nchar );
b_report_pending=true;
}
else if( !strcmp((const char*)rxbuf, "get_sensor_value sensor=pb1") )
{ // Push button 1
nchar=build_answer(txbuf, "pb1");
b_pushb1_get_value( txbuf+nchar );
b_report_pending=true;
}
else if( !strcmp((const char*)rxbuf, "get_sensor_value sensor=pb2") )
{ // Push button 2
nchar=build_answer(txbuf, "pb2");
b_pushb2_get_value( txbuf+nchar );
b_report_pending=true;
}
#if BOARD == EVK1100
else if( !strcmp((const char*)rxbuf, "get_sensor_value sensor=pb3") )
{ // Push button 3
nchar=build_answer(txbuf, "pb3");
sprintf( txbuf+nchar, "RELEASE\r\n");
b_report_pending=true;
}
#endif
else if( !strcmp((const char*)rxbuf, "get_sensor_value sensor=light") )
{ // light
U32 value;
nchar=build_answer(txbuf, "light");
b_light_get_value( txbuf+nchar, &value );
e_ledm_refresh_intensity( value );
b_report_pending=true;
}
else if( !strcmp((const char*)rxbuf, "get_actuator_value actuator=ledm1") )
{ // led1
nchar=build_answer(txbuf, "ledm1");
b_ledm1_get_value( txbuf+nchar );
b_report_pending=true;
}
else if( !strcmp((const char*)rxbuf, "get_actuator_value actuator=ledm2") )
{ // led2
nchar=build_answer(txbuf, "ledm2");
b_ledm2_get_value( txbuf+nchar );
b_report_pending=true;
}
else if( !strcmp((const char*)rxbuf, "get_actuator_value actuator=ledm3") )
{ // led3
nchar=build_answer(txbuf, "ledm3");
b_ledm3_get_value( txbuf+nchar );
b_report_pending=true;
}
else if( !strcmp((const char*)rxbuf, "get_actuator_value actuator=ledm4") )
{ // led4
nchar=build_answer(txbuf, "ledm4");
b_ledm4_get_value( txbuf+nchar );
b_report_pending=true;
}
else if( !strncmp((const char*)rxbuf, STR_SET_LEDM1, strlen(STR_SET_LEDM1)) )
{ // led1
nchar=build_answer(txbuf, "ledm1");
e_ledm1_set_value(rxbuf+strlen(STR_SET_LEDM1), txbuf+nchar);
b_report_pending=true;
}
else if( !strncmp((const char*)rxbuf, STR_SET_LEDM2, strlen(STR_SET_LEDM2)) )
{ // led2
nchar=build_answer(txbuf, "ledm2");
e_ledm2_set_value(rxbuf+strlen(STR_SET_LEDM2), txbuf+nchar);
b_report_pending=true;
}
else if( !strncmp((const char*)rxbuf, STR_SET_LEDM3, strlen(STR_SET_LEDM3)) )
{ // led3
nchar=build_answer(txbuf, "ledm3");
e_ledm3_set_value(rxbuf+strlen(STR_SET_LEDM2), txbuf+nchar);
b_report_pending=true;
}
else if( !strncmp((const char*)rxbuf, STR_SET_LEDM4, strlen(STR_SET_LEDM4)) )
{ // led4
nchar=build_answer(txbuf, "ledm4");
e_ledm4_set_value(rxbuf+strlen(STR_SET_LEDM2), txbuf+nchar);
b_report_pending=true;
}
else if( !strcmp((const char*)rxbuf, "get_sensor_value sensor=accx") )
{ // accelerometer
nchar=build_answer(txbuf, "accx");
accelerometer_measure(0, txbuf+nchar);
b_report_pending=true;
}
else if( !strcmp((const char*)rxbuf, "get_sensor_value sensor=accy") )
{ // accelerometer
nchar=build_answer(txbuf, "accy");
accelerometer_measure(1, txbuf+nchar);
b_report_pending=true;
}
}
if( b_report_pending && Is_usb_in_ready(EP_FC_IN) )
{
U8 data_to_transfer;
char* ptr_cram=txbuf;
//printf( "Sending %s", txbuf);
#if 0
Usb_reset_endpoint_fifo_access(EP_FC_IN);
usb_write_ep_txpacket(EP_FC_IN, &txbuf, TXBUF_SIZE, NULL);
Usb_ack_in_ready_send(EP_FC_IN);
#endif
data_to_transfer = strlen(txbuf);
while (data_to_transfer)
{
while (!Is_usb_in_ready(EP_FC_IN));
Usb_reset_endpoint_fifo_access(EP_FC_IN);
data_to_transfer = usb_write_ep_txpacket(EP_FC_IN, ptr_cram, data_to_transfer, (const void**)&ptr_cram);
Usb_ack_in_ready_send(EP_FC_IN);
}
b_report_pending=false;
}
#ifdef FREERTOS_USED
}
#endif
}
// !
// ! @brief USB Command Status Wrapper (CSW) management
// !
// ! This function sends the status in relation with the last CBW.
// !
static void usb_mass_storage_csw (void)
{
int i;
/*
i = 1; while (1 == i) { i = 0; if (Is_usb_endpoint_stall_requested(EP_MS_IN)) { i = 1; if (Is_usb_setup_received()) { usb_process_request(); }
}
if (Is_usb_endpoint_stall_requested(EP_MS_OUT)) { i = 1; if (Is_usb_setup_received()) { usb_process_request(); } } } */
while (Is_usb_endpoint_stall_requested (EP_MS_IN))
{
if (Is_usb_setup_received ())
usb_process_request ();
}
while (Is_usb_endpoint_stall_requested (EP_MS_OUT))
{
if (Is_usb_setup_received ())
usb_process_request ();
}
// MSC Compliance - Free BAD out receiv during SCSI command
while (Is_usb_out_received (EP_MS_OUT))
{
Usb_ack_out_received_free (EP_MS_OUT);
}
while (!Is_usb_in_ready (EP_MS_IN));
/*
// for (i=0;i<100000;i++) // Make break out { if (Is_usb_in_ready(EP_MS_IN)) { break; } } */
Usb_reset_endpoint_fifo_access (EP_MS_IN);
// ! Write CSW Signature
Usb_write_endpoint_data (EP_MS_IN, 32, *(U32 *) & "USBS");
// ! Write stored CBW Tag
Usb_write_endpoint_data (EP_MS_IN, 32, dCBWTag);
// ! Write data residual value
Usb_write_endpoint_data (EP_MS_IN, 32, usb_format_mcu_to_usb_data (32, g_scsi_data_remaining));
// ! Write command status
Usb_write_endpoint_data (EP_MS_IN, 8, g_scsi_status);
Usb_ack_in_ready_send (EP_MS_IN);
// MSC Compliance - Wait end of all transmitions on USB line
for (i = 0; i < 1000; i++)
{
if (0 != Usb_nb_busy_bank (EP_MS_IN))
{
if (Is_usb_setup_received ())
usb_process_request ();
}
else
{
break;
}
}
/*
while( 0 != Usb_nb_busy_bank(EP_MS_IN) ) { if (Is_usb_setup_received()) usb_process_request(); } */
}
//! usb_set_interface.
//!
//! TThis function manages the SET_INTERFACE request.
//!
//! @warning Code:xx bytes (function code length)
//!
//! @param none
//!
//! @return none
//!
void usb_set_interface (void)
{
Usb_ack_receive_setup();
Usb_send_control_in(); //!< send a ZLP for STATUS phase
while(!Is_usb_in_ready());
}
static void usb_mass_storage_csw(void)
{
volatile U32 timeoutTickCount = g_lifetimeHalfSecondTickCount + 6;
while (Is_usb_endpoint_stall_requested(EP_MS_IN))
{
if (!Is_usb_endpoint_enabled(g_scsi_ep_ms_in)) { return; } // USB Reset
if ((volatile U32)timeoutTickCount == (volatile U32)g_lifetimeHalfSecondTickCount) { return; }
if (Is_usb_setup_received())
{
usb_process_request();
timeoutTickCount = (volatile U32)g_lifetimeHalfSecondTickCount + 6;
}
}
timeoutTickCount = (volatile U32)g_lifetimeHalfSecondTickCount + 6;
while (Is_usb_endpoint_stall_requested(EP_MS_OUT))
{
if (!Is_usb_endpoint_enabled(g_scsi_ep_ms_in)) { return; } // USB Reset
if ((volatile U32)timeoutTickCount == (volatile U32)g_lifetimeHalfSecondTickCount) { return; }
if (Is_usb_setup_received())
{
usb_process_request();
timeoutTickCount = (volatile U32)g_lifetimeHalfSecondTickCount + 6;
}
}
// MSC Compliance - Free BAD out receive during SCSI command
while( Is_usb_out_received(EP_MS_OUT) ) {
Usb_ack_out_received_free(EP_MS_OUT);
}
timeoutTickCount = (volatile U32)g_lifetimeHalfSecondTickCount + 6;
while (!Is_usb_in_ready(EP_MS_IN))
{
if (!Is_usb_endpoint_enabled(g_scsi_ep_ms_in)) { return; } // USB Reset
if ((volatile U32)timeoutTickCount == (volatile U32)g_lifetimeHalfSecondTickCount) { return; }
}
Usb_reset_endpoint_fifo_access(EP_MS_IN);
//! Write CSW Signature
Usb_write_endpoint_data(EP_MS_IN, 32, *(uint32_t *)&"USBS");
//! Write stored CBW Tag
Usb_write_endpoint_data(EP_MS_IN, 32, dCBWTag);
//! Write data residual value
Usb_write_endpoint_data(EP_MS_IN, 32,
usb_format_mcu_to_usb_data(32, g_scsi_data_remaining));
//! Write command status
Usb_write_endpoint_data(EP_MS_IN, 8, g_scsi_status);
Usb_ack_in_ready_send(EP_MS_IN);
// MSC Compliance - Wait end of all transmissions on USB line
while( 0 != Usb_nb_busy_bank(EP_MS_IN) )
{
if (Is_usb_setup_received()) usb_process_request();
}
}
