Example #1
0
void OCamlFFlatCodeGen::writeData()
{
	if ( redFsm->anyConditions() ) {
		OPEN_ARRAY( WIDE_ALPH_TYPE(), CK() );
		COND_KEYS();
		CLOSE_ARRAY() <<
		L"\n";

		OPEN_ARRAY( ARRAY_TYPE(redFsm->maxCondSpan), CSP() );
		COND_KEY_SPANS();
		CLOSE_ARRAY() <<
		L"\n";

		OPEN_ARRAY( ARRAY_TYPE(redFsm->maxCond), C() );
		CONDS();
		CLOSE_ARRAY() <<
		L"\n";

		OPEN_ARRAY( ARRAY_TYPE(redFsm->maxCondIndexOffset), CO() );
		COND_INDEX_OFFSET();
		CLOSE_ARRAY() <<
		L"\n";
	}

	OPEN_ARRAY( WIDE_ALPH_TYPE(), K() );
	KEYS();
	CLOSE_ARRAY() <<
	L"\n";

	OPEN_ARRAY( ARRAY_TYPE(redFsm->maxSpan), SP() );
	KEY_SPANS();
	CLOSE_ARRAY() <<
	L"\n";

	OPEN_ARRAY( ARRAY_TYPE(redFsm->maxFlatIndexOffset), IO() );
	FLAT_INDEX_OFFSET();
	CLOSE_ARRAY() <<
	L"\n";

	OPEN_ARRAY( ARRAY_TYPE(redFsm->maxIndex), I() );
	INDICIES();
	CLOSE_ARRAY() <<
	L"\n";

	OPEN_ARRAY( ARRAY_TYPE(redFsm->maxState), TT() );
	TRANS_TARGS();
	CLOSE_ARRAY() <<
	L"\n";

	if ( redFsm->anyActions() ) {
		OPEN_ARRAY( ARRAY_TYPE(redFsm->maxActListId), TA() );
		TRANS_ACTIONS();
		CLOSE_ARRAY() <<
		L"\n";
	}

	if ( redFsm->anyToStateActions() ) {
		OPEN_ARRAY( ARRAY_TYPE(redFsm->maxActionLoc),  TSA() );
		TO_STATE_ACTIONS();
		CLOSE_ARRAY() <<
		L"\n";
	}

	if ( redFsm->anyFromStateActions() ) {
		OPEN_ARRAY( ARRAY_TYPE(redFsm->maxActionLoc), FSA() );
		FROM_STATE_ACTIONS();
		CLOSE_ARRAY() <<
		L"\n";
	}

	if ( redFsm->anyEofActions() ) {
		OPEN_ARRAY( ARRAY_TYPE(redFsm->maxActListId), EA() );
		EOF_ACTIONS();
		CLOSE_ARRAY() <<
		L"\n";
	}

	if ( redFsm->anyEofTrans() ) {
		OPEN_ARRAY( ARRAY_TYPE(redFsm->maxIndexOffset+1), ET() );
		EOF_TRANS();
		CLOSE_ARRAY() <<
		L"\n";
	}

	STATE_IDS();

  out << L"type " << TYPE_STATE() << L" = { mutable keys : int; mutable trans : int; }"
    << TOP_SEP();

  out << L"exception Goto_match" << TOP_SEP();
  out << L"exception Goto_again" << TOP_SEP();
  out << L"exception Goto_eof_trans" << TOP_SEP();
}
Example #2
0
 /**
 * @brief Return the projection matrix (interior & exterior) as a simplified projective projection
 * @param pose Extrinsic matrix
 * @return Concatenation of intrinsic matrix and extrinsic matrix
 */
 virtual Mat34 get_projective_equivalent( const geometry::Pose3 & pose ) const
 {
   Mat34 P;
   P_From_KRt( K(), pose.rotation(), pose.translation(), &P );
   return P;
 }
Example #3
0
void CSharpTabCodeGen::writeData()
{
    /* If there are any transtion functions then output the array. If there
     * are none, don't bother emitting an empty array that won't be used. */
    if ( redFsm->anyActions() ) {
        OPEN_ARRAY( ARRAY_TYPE(redFsm->maxActArrItem), A() );
        ACTIONS_ARRAY();
        CLOSE_ARRAY() <<
                      "\n";
    }

    if ( redFsm->anyConditions() ) {
        OPEN_ARRAY( ARRAY_TYPE(redFsm->maxCondOffset), CO() );
        COND_OFFSETS();
        CLOSE_ARRAY() <<
                      "\n";

        OPEN_ARRAY( ARRAY_TYPE(redFsm->maxCondLen), CL() );
        COND_LENS();
        CLOSE_ARRAY() <<
                      "\n";

        OPEN_ARRAY( WIDE_ALPH_TYPE(), CK() );
        COND_KEYS();
        CLOSE_ARRAY() <<
                      "\n";

        OPEN_ARRAY( ARRAY_TYPE(redFsm->maxCondSpaceId), C() );
        COND_SPACES();
        CLOSE_ARRAY() <<
                      "\n";
    }

    OPEN_ARRAY( ARRAY_TYPE(redFsm->maxKeyOffset), KO() );
    KEY_OFFSETS();
    CLOSE_ARRAY() <<
                  "\n";

    OPEN_ARRAY( WIDE_ALPH_TYPE(), K() );
    KEYS();
    CLOSE_ARRAY() <<
                  "\n";

    OPEN_ARRAY( ARRAY_TYPE(redFsm->maxSingleLen), SL() );
    SINGLE_LENS();
    CLOSE_ARRAY() <<
                  "\n";

    OPEN_ARRAY( ARRAY_TYPE(redFsm->maxRangeLen), RL() );
    RANGE_LENS();
    CLOSE_ARRAY() <<
                  "\n";

    OPEN_ARRAY( ARRAY_TYPE(redFsm->maxIndexOffset), IO() );
    INDEX_OFFSETS();
    CLOSE_ARRAY() <<
                  "\n";

    if ( useIndicies ) {
        OPEN_ARRAY( ARRAY_TYPE(redFsm->maxIndex), I() );
        INDICIES();
        CLOSE_ARRAY() <<
                      "\n";

        OPEN_ARRAY( ARRAY_TYPE(redFsm->maxState), TT() );
        TRANS_TARGS_WI();
        CLOSE_ARRAY() <<
                      "\n";

        if ( redFsm->anyActions() ) {
            OPEN_ARRAY( ARRAY_TYPE(redFsm->maxActionLoc), TA() );
            TRANS_ACTIONS_WI();
            CLOSE_ARRAY() <<
                          "\n";
        }
    }
    else {
        OPEN_ARRAY( ARRAY_TYPE(redFsm->maxState), TT() );
        TRANS_TARGS();
        CLOSE_ARRAY() <<
                      "\n";

        if ( redFsm->anyActions() ) {
            OPEN_ARRAY( ARRAY_TYPE(redFsm->maxActionLoc), TA() );
            TRANS_ACTIONS();
            CLOSE_ARRAY() <<
                          "\n";
        }
    }

    if ( redFsm->anyToStateActions() ) {
        OPEN_ARRAY( ARRAY_TYPE(redFsm->maxActionLoc), TSA() );
        TO_STATE_ACTIONS();
        CLOSE_ARRAY() <<
                      "\n";
    }

    if ( redFsm->anyFromStateActions() ) {
        OPEN_ARRAY( ARRAY_TYPE(redFsm->maxActionLoc), FSA() );
        FROM_STATE_ACTIONS();
        CLOSE_ARRAY() <<
                      "\n";
    }

    if ( redFsm->anyEofActions() ) {
        OPEN_ARRAY( ARRAY_TYPE(redFsm->maxActionLoc), EA() );
        EOF_ACTIONS();
        CLOSE_ARRAY() <<
                      "\n";
    }

    if ( redFsm->anyEofTrans() ) {
        OPEN_ARRAY( ARRAY_TYPE(redFsm->maxIndexOffset+1), ET() );
        EOF_TRANS();
        CLOSE_ARRAY() <<
                      "\n";
    }

    STATE_IDS();
}
Example #4
0
int main(int argc, char **argv)
{
  int j, k, t; /**< indices                 */
  int d; /**< number of dimensions    */
  int N; /**< number of source nodes  */
  int M; /**< number of target nodes  */
  int n; /**< expansion degree        */
  int m; /**< cut-off parameter       */
  int p; /**< degree of smoothness    */
  const char *s; /**< name of kernel          */
  C (*kernel)(R, int, const R *); /**< kernel function         */
  R c; /**< parameter for kernel    */
  fastsum_plan my_fastsum_plan; /**< plan for fast summation */
  C *direct; /**< array for direct computation */
  ticks t0, t1; /**< for time measurement    */
  R time; /**< for time measurement    */
  R error = K(0.0); /**< for error computation   */
  R eps_I; /**< inner boundary          */
  R eps_B; /**< outer boundary          */
  FILE *fid1, *fid2;
  R temp;

  if (argc != 11)
  {
    printf("\nfastsum_test d N M n m p kernel c\n\n");
    printf("  d       dimension                 \n");
    printf("  N       number of source nodes    \n");
    printf("  M       number of target nodes    \n");
    printf("  n       expansion degree          \n");
    printf("  m       cut-off parameter         \n");
    printf("  p       degree of smoothness      \n");
    printf("  kernel  kernel function  (e.g., gaussian)\n");
    printf("  c       kernel parameter          \n");
    printf("  eps_I   inner boundary            \n");
    printf("  eps_B   outer boundary            \n\n");
    exit(-1);
  }
  else
  {
    d = atoi(argv[1]);
    N = atoi(argv[2]);
    c = K(1.0) / POW((R)(N), K(1.0) / ((R)(d)));
    M = atoi(argv[3]);
    n = atoi(argv[4]);
    m = atoi(argv[5]);
    p = atoi(argv[6]);
    s = argv[7];
    c = (R)(atof(argv[8]));
    eps_I = (R)(atof(argv[9]));
    eps_B = (R)(atof(argv[10]));
    if (strcmp(s, "gaussian") == 0)
      kernel = gaussian;
    else if (strcmp(s, "multiquadric") == 0)
      kernel = multiquadric;
    else if (strcmp(s, "inverse_multiquadric") == 0)
      kernel = inverse_multiquadric;
    else if (strcmp(s, "logarithm") == 0)
      kernel = logarithm;
    else if (strcmp(s, "thinplate_spline") == 0)
      kernel = thinplate_spline;
    else if (strcmp(s, "one_over_square") == 0)
      kernel = one_over_square;
    else if (strcmp(s, "one_over_modulus") == 0)
      kernel = one_over_modulus;
    else if (strcmp(s, "one_over_x") == 0)
      kernel = one_over_x;
    else if (strcmp(s, "inverse_multiquadric3") == 0)
      kernel = inverse_multiquadric3;
    else if (strcmp(s, "sinc_kernel") == 0)
      kernel = sinc_kernel;
    else if (strcmp(s, "cosc") == 0)
      kernel = cosc;
    else if (strcmp(s, "cot") == 0)
      kernel = kcot;
    else
    {
      s = "multiquadric";
      kernel = multiquadric;
    }
  }
  printf(
      "d=%d, N=%d, M=%d, n=%d, m=%d, p=%d, kernel=%s, c=%" __FGS__ ", eps_I=%" __FGS__ ", eps_B=%" __FGS__ " \n",
      d, N, M, n, m, p, s, c, eps_I, eps_B);

  /** init two dimensional fastsum plan */
  fastsum_init_guru(&my_fastsum_plan, d, N, M, kernel, &c, 0, n, m, p, eps_I,
      eps_B);
  /*fastsum_init_guru(&my_fastsum_plan, d, N, M, kernel, &c, EXACT_NEARFIELD, n, m, p);*/

  /** load source knots and coefficients */
  fid1 = fopen("x.dat", "r");
  fid2 = fopen("alpha.dat", "r");
  for (k = 0; k < N; k++)
  {
    for (t = 0; t < d; t++)
    {
      fscanf(fid1, __FR__, &my_fastsum_plan.x[k * d + t]);
    }
    fscanf(fid2, __FR__, &temp);
    my_fastsum_plan.alpha[k] = temp;
    fscanf(fid2, __FR__, &temp);
    my_fastsum_plan.alpha[k] += temp * II;
  }
  fclose(fid1);
  fclose(fid2);

  /** load target knots */
  fid1 = fopen("y.dat", "r");
  for (j = 0; j < M; j++)
  {
    for (t = 0; t < d; t++)
    {
      fscanf(fid1, __FR__, &my_fastsum_plan.y[j * d + t]);
    }
  }
  fclose(fid1);

  /** direct computation */
  printf("direct computation: ");
  fflush(NULL);
  t0 = getticks();
  fastsum_exact(&my_fastsum_plan);
  t1 = getticks();
  time = NFFT(elapsed_seconds)(t1, t0);
  printf(__FI__ "sec\n", time);

  /** copy result */
  direct = (C *) NFFT(malloc)((size_t)(my_fastsum_plan.M_total) * (sizeof(C)));
  for (j = 0; j < my_fastsum_plan.M_total; j++)
    direct[j] = my_fastsum_plan.f[j];

  /** precomputation */
  printf("pre-computation:    ");
  fflush(NULL);
  t0 = getticks();
  fastsum_precompute(&my_fastsum_plan);
  t1 = getticks();
  time = NFFT(elapsed_seconds)(t1, t0);
  printf(__FI__ "sec\n", time);

  /** fast computation */
  printf("fast computation:   ");
  fflush(NULL);
  t0 = getticks();
  fastsum_trafo(&my_fastsum_plan);
  t1 = getticks();
  time = NFFT(elapsed_seconds)(t1, t0);
  printf(__FI__ "sec\n", time);

  /** compute max error */
  error = K(0.0);
  for (j = 0; j < my_fastsum_plan.M_total; j++)
  {
    if (CABS(direct[j] - my_fastsum_plan.f[j]) / CABS(direct[j]) > error)
      error = CABS(direct[j] - my_fastsum_plan.f[j]) / CABS(direct[j]);
  }
  printf("max relative error: " __FE__ "\n", error);

  /** write result to file */
  fid1 = fopen("f.dat", "w+");
  fid2 = fopen("f_direct.dat", "w+");
  if (fid1 == NULL)
  {
    printf("Fehler!\n");
    exit(EXIT_FAILURE);
  }
  for (j = 0; j < M; j++)
  {
    temp = CREAL(my_fastsum_plan.f[j]);
    fprintf(fid1, "  % .16" __FES__ "", temp);
    temp = CIMAG(my_fastsum_plan.f[j]);
    fprintf(fid1, "  % .16" __FES__ "\n", temp);

    temp = CREAL(direct[j]);
    fprintf(fid2, "  % .16" __FES__ "", temp);
    temp = CIMAG(direct[j]);
    fprintf(fid2, "  % .16" __FES__ "\n", temp);
  }
  fclose(fid1);
  fclose(fid2);

  /** finalise the plan */
  fastsum_finalize(&my_fastsum_plan);

  return EXIT_SUCCESS;
}
SpriteStarVlist::SpriteStarVlist(int num, float spread, std::string sysnam, std::string texturenames,float size):StarVlist(spread) {
    int curtexture=0;
    vector<AnimatedTexture *>animations;
    static bool near_stars_alpha=XMLSupport::parse_bool(vs_config->getVariable("graphics","near_stars_alpha","false"));
    for (curtexture=0; curtexture<NUM_ACTIVE_ANIMATIONS; ++curtexture) {
        std::string::size_type where=texturenames.find(" ");
        string texturename=texturenames.substr(0,where);
        if (where!=string::npos) {
            texturenames=texturenames.substr(where+1);
        } else texturenames="";

        if (texturename.find(".ani")!=string::npos) {
            animations.push_back(new AnimatedTexture(texturename.c_str(),0,near_stars_alpha?NEAREST:BILINEAR));
            decal[curtexture]=animations.back();
        } else if (texturename.length()==0) {
            if (curtexture==0) {
                decal[curtexture]= new Texture("white.bmp",0,near_stars_alpha?NEAREST:BILINEAR);
            } else {
                if (animations.size()) {
                    AnimatedTexture *tmp= static_cast<AnimatedTexture*>(animations[curtexture%animations.size()]->Clone());
                    int num= tmp->numFrames();
                    if (num) {
                        num = rand()%num;
                        tmp->setTime(num/tmp->framesPerSecond());
                    }
                    decal[curtexture]=tmp;


                } else {
                    decal[curtexture]=decal[rand()%curtexture]->Clone();
                }
            }
        } else {
            decal[curtexture] = new Texture(texturename.c_str());
        }
    }
    int numVerticesPer=near_stars_alpha?4:12;
    GFXColorVertex * tmpvertex = AllocVerticesForSystem(sysnam,this->spread,&num,numVerticesPer);

    for (int LC=0; LC<num; LC+=numVerticesPer) {
        int LAST=LC+numVerticesPer-1;
        for (int i=LC; i<=LAST; ++i) {
            tmpvertex[i].r=tmpvertex[LAST].r;
            tmpvertex[i].g=tmpvertex[LAST].g;
            tmpvertex[i].b=tmpvertex[LAST].b;
            tmpvertex[i].a=tmpvertex[LAST].a;
        }
        Vector I(rand()*2.0/RAND_MAX-1,
                 rand()*2.0/RAND_MAX-1,
                 rand()*2.0/RAND_MAX-1);
        Vector J(rand()*2.0/RAND_MAX-1,
                 rand()*2.0/RAND_MAX-1,
                 rand()*2.0/RAND_MAX-1);
        Vector K(rand()*2.0/RAND_MAX-1,
                 rand()*2.0/RAND_MAX-1,
                 rand()*2.0/RAND_MAX-1);
        if (I.MagnitudeSquared()<.00001) {
            I.i+=.5;
        }
        if (J.MagnitudeSquared()<.00001) {
            J.j+=.5;
        }
        if (K.MagnitudeSquared()<.00001) {
            K.k+=.5;
        }
        Orthogonize(I,J,K);
        I=I*size;
        J=J*size;
        K=K*size;
        tmpvertex[LC+0].SetVertex(GetConstVertex(tmpvertex[LC+0])-I+J);
        tmpvertex[LC+0].s=0.15625;
        tmpvertex[LC+0].t=.984375;
        tmpvertex[LC+1].SetVertex(GetConstVertex(tmpvertex[LC+1])+I+J);
        tmpvertex[LC+1].s=.984375;
        tmpvertex[LC+1].t=.984375;
        tmpvertex[LC+2].SetVertex(GetConstVertex(tmpvertex[LC+2])+I-J);
        tmpvertex[LC+2].s=.984375;
        tmpvertex[LC+2].t=.015625;
        tmpvertex[LC+3].SetVertex(GetConstVertex(tmpvertex[LC+3])-I-J);
        tmpvertex[LC+3].s=.015625;
        tmpvertex[LC+3].t=.015625;
        if (numVerticesPer>4) {
            tmpvertex[LC+4].SetVertex(GetConstVertex(tmpvertex[LC+4])-I+K);
            tmpvertex[LC+4].s=.015625;
            tmpvertex[LC+4].t=.984375;
            tmpvertex[LC+5].SetVertex(GetConstVertex(tmpvertex[LC+5])+I+K);
            tmpvertex[LC+5].s=.984375;
            tmpvertex[LC+5].t=.984375;
            tmpvertex[LC+6].SetVertex(GetConstVertex(tmpvertex[LC+6])+I-K);
            tmpvertex[LC+6].s=.984375;
            tmpvertex[LC+6].t=.015625;
            tmpvertex[LC+7].SetVertex(GetConstVertex(tmpvertex[LC+7])-I-K);
            tmpvertex[LC+7].s=.015625;
            tmpvertex[LC+7].t=.015625;
        }
        if (numVerticesPer>8) {
            tmpvertex[LC+8].SetVertex(GetConstVertex(tmpvertex[LC+8])-J+K);
            tmpvertex[LC+8].s=.015625;
            tmpvertex[LC+8].t=.984375;
            tmpvertex[LC+9].SetVertex(GetConstVertex(tmpvertex[LC+9])+J+K);
            tmpvertex[LC+9].s=.984375;
            tmpvertex[LC+9].t=.984375;
            tmpvertex[LC+10].SetVertex(GetConstVertex(tmpvertex[LC+10])+J-K);
            tmpvertex[LC+10].s=.984375;
            tmpvertex[LC+10].t=.015625;
            tmpvertex[LC+11].SetVertex(GetConstVertex(tmpvertex[LC+11])-J-K);
            tmpvertex[LC+11].s=.015625;
            tmpvertex[LC+11].t=.015625;
        }
    }
    {
        int start=0;
        int inc = num/NUM_ACTIVE_ANIMATIONS;
        inc-=inc%numVerticesPer;
        for (int i=0; i<NUM_ACTIVE_ANIMATIONS; ++i,start+=inc) {
            int later=start+inc;
            if (i==NUM_ACTIVE_ANIMATIONS-1)
                later=num;
            vlist[i]= new GFXVertexList (GFXQUAD,later-start,tmpvertex+start, later-start, true,0);

        }
    }
    delete []tmpvertex;

}
Example #6
0
static int meminfo_proc_show(struct seq_file *m, void *v)
{
	struct sysinfo i;
	unsigned long committed;
	unsigned long allowed;
	struct vmalloc_info vmi;
	long cached;
	unsigned long pages[NR_LRU_LISTS];
	int lru;

/*
 * display in kilobytes.
 */
#define K(x) ((x) << (PAGE_SHIFT - 10))
	si_meminfo(&i);
	si_swapinfo(&i);
	committed = percpu_counter_read_positive(&vm_committed_as);
	allowed = ((totalram_pages - hugetlb_total_pages())
		* sysctl_overcommit_ratio / 100) + total_swap_pages;

	cached = global_page_state(NR_FILE_PAGES) -
			total_swapcache_pages - i.bufferram;
	if (cached < 0)
		cached = 0;

	get_vmalloc_info(&vmi);

	for (lru = LRU_BASE; lru < NR_LRU_LISTS; lru++)
		pages[lru] = global_page_state(NR_LRU_BASE + lru);

	/*
	 * Tagged format, for easy grepping and expansion.
	 */
	seq_printf(m,
		"MemTotal:       %8lu kB\n"
		"MemFree:        %8lu kB\n"
		"Buffers:        %8lu kB\n"
		"Cached:         %8lu kB\n"
		"SwapCached:     %8lu kB\n"
		"Active:         %8lu kB\n"
		"Inactive:       %8lu kB\n"
		"Active(anon):   %8lu kB\n"
		"Inactive(anon): %8lu kB\n"
		"Active(file):   %8lu kB\n"
		"Inactive(file): %8lu kB\n"
		"Unevictable:    %8lu kB\n"
		"Mlocked:        %8lu kB\n"
#ifdef CONFIG_HIGHMEM
		"HighTotal:      %8lu kB\n"
		"HighFree:       %8lu kB\n"
		"LowTotal:       %8lu kB\n"
		"LowFree:        %8lu kB\n"
#endif
#ifndef CONFIG_MMU
		"MmapCopy:       %8lu kB\n"
#endif
		"SwapTotal:      %8lu kB\n"
		"SwapFree:       %8lu kB\n"
		"Dirty:          %8lu kB\n"
		"Writeback:      %8lu kB\n"
		"AnonPages:      %8lu kB\n"
		"Mapped:         %8lu kB\n"
		"Shmem:          %8lu kB\n"
		"Slab:           %8lu kB\n"
		"SReclaimable:   %8lu kB\n"
		"SUnreclaim:     %8lu kB\n"
		"KernelStack:    %8lu kB\n"
		"PageTables:     %8lu kB\n"
#ifdef CONFIG_QUICKLIST
		"Quicklists:     %8lu kB\n"
#endif
		"NFS_Unstable:   %8lu kB\n"
		"Bounce:         %8lu kB\n"
		"WritebackTmp:   %8lu kB\n"
		"CommitLimit:    %8lu kB\n"
		"Committed_AS:   %8lu kB\n"
		"VmallocTotal:   %8lu kB\n"
		"VmallocUsed:    %8lu kB\n"
		"VmallocChunk:   %8lu kB\n"
#ifdef CONFIG_MEMORY_FAILURE
		"HardwareCorrupted: %5lu kB\n"
#endif
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
		"AnonHugePages:  %8lu kB\n"
#endif
		,
		K(i.totalram),
		K(i.freeram),
		K(i.bufferram),
		K(cached),
		K(total_swapcache_pages),
		K(pages[LRU_ACTIVE_ANON]   + pages[LRU_ACTIVE_FILE]),
		K(pages[LRU_INACTIVE_ANON] + pages[LRU_INACTIVE_FILE]),
		K(pages[LRU_ACTIVE_ANON]),
		K(pages[LRU_INACTIVE_ANON]),
		K(pages[LRU_ACTIVE_FILE]),
		K(pages[LRU_INACTIVE_FILE]),
		K(pages[LRU_UNEVICTABLE]),
		K(global_page_state(NR_MLOCK)),
#ifdef CONFIG_HIGHMEM
		K(i.totalhigh),
		K(i.freehigh),
		K(i.totalram-i.totalhigh),
		K(i.freeram-i.freehigh),
#endif
#ifndef CONFIG_MMU
		K((unsigned long) atomic_long_read(&mmap_pages_allocated)),
#endif
		K(i.totalswap),
		K(i.freeswap),
		K(global_page_state(NR_FILE_DIRTY)),
		K(global_page_state(NR_WRITEBACK)),
		K(global_page_state(NR_ANON_PAGES)
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
		  + global_page_state(NR_ANON_TRANSPARENT_HUGEPAGES) *
		  HPAGE_PMD_NR
#endif
		  ),
		K(global_page_state(NR_FILE_MAPPED)),
		K(global_page_state(NR_SHMEM)),
		K(global_page_state(NR_SLAB_RECLAIMABLE) +
				global_page_state(NR_SLAB_UNRECLAIMABLE)),
		K(global_page_state(NR_SLAB_RECLAIMABLE)),
		K(global_page_state(NR_SLAB_UNRECLAIMABLE)),
		global_page_state(NR_KERNEL_STACK) * THREAD_SIZE / 1024,
		K(global_page_state(NR_PAGETABLE)),
#ifdef CONFIG_QUICKLIST
		K(quicklist_total_size()),
#endif
		K(global_page_state(NR_UNSTABLE_NFS)),
		K(global_page_state(NR_BOUNCE)),
		K(global_page_state(NR_WRITEBACK_TEMP)),
		K(allowed),
		K(committed),
		(unsigned long)VMALLOC_TOTAL >> 10,
		vmi.used >> 10,
		vmi.largest_chunk >> 10
#ifdef CONFIG_MEMORY_FAILURE
		,atomic_long_read(&mce_bad_pages) << (PAGE_SHIFT - 10)
#endif
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
		,K(global_page_state(NR_ANON_TRANSPARENT_HUGEPAGES) *
		   HPAGE_PMD_NR)
#endif
		);

	hugetlb_report_meminfo(m);

	arch_report_meminfo(m);

	return 0;
#undef K
}
Example #7
0
// Collect knight jump flags
#define N(sq) [sq]=(\
              dir(sq,jumpNNW,bitNNW)   +   dir(sq,jumpNNE,bitNNE)+           \
                                                                             \
  dir(sq,jumpWNW,bitWNW)   +           +           +   dir(sq,jumpENE,bitENE)\
                                                                             \
               +           +           +           +           +             \
                                                                             \
  dir(sq,jumpWSW,bitWSW)   +           +           +   dir(sq,jumpESE,bitESE)\
                                                                             \
             +dir(sq,jumpSSW,bitSSW)   +   dir(sq,jumpSSE,bitSSE))

// 8 bits per square representing which directions a king can step to
const unsigned char kingDirections[] = {
        K(a1), K(a2), K(a3), K(a4), K(a5), K(a6), K(a7), K(a8),
        K(b1), K(b2), K(b3), K(b4), K(b5), K(b6), K(b7), K(b8),
        K(c1), K(c2), K(c3), K(c4), K(c5), K(c6), K(c7), K(c8),
        K(d1), K(d2), K(d3), K(d4), K(d5), K(d6), K(d7), K(d8),
        K(e1), K(e2), K(e3), K(e4), K(e5), K(e6), K(e7), K(e8),
        K(f1), K(f2), K(f3), K(f4), K(f5), K(f6), K(f7), K(f8),
        K(g1), K(g2), K(g3), K(g4), K(g5), K(g6), K(g7), K(g8),
        K(h1), K(h2), K(h3), K(h4), K(h5), K(h6), K(h7), K(h8),
};

// 8 bits per square representing which directions a knight can jump to
static const unsigned char knightDirections[] = {
        N(a1), N(a2), N(a3), N(a4), N(a5), N(a6), N(a7), N(a8),
        N(b1), N(b2), N(b3), N(b4), N(b5), N(b6), N(b7), N(b8),
        N(c1), N(c2), N(c3), N(c4), N(c5), N(c6), N(c7), N(c8),
        N(d1), N(d2), N(d3), N(d4), N(d5), N(d6), N(d7), N(d8),
Example #8
0
static int meminfo_read_proc(char *page, char **start, off_t off,
				 int count, int *eof, void *data)
{
	struct sysinfo i;
	int len;
	int pg_size, committed;

/*
 * display in kilobytes.
 */
#define K(x) ((x) << (PAGE_SHIFT - 10))
#define B(x) ((unsigned long long)(x) << PAGE_SHIFT)
	si_meminfo(&i);
	si_swapinfo(&i);
	pg_size = atomic_read(&page_cache_size) - i.bufferram ;
	committed = atomic_read(&vm_committed_space);

	len = sprintf(page, "        total:    used:    free:  shared: buffers:  cached:\n"
		"Mem:  %8Lu %8Lu %8Lu %8Lu %8Lu %8Lu\n"
		"Swap: %8Lu %8Lu %8Lu\n",
		B(i.totalram), B(i.totalram-i.freeram), B(i.freeram),
		B(i.sharedram), B(i.bufferram),
		B(pg_size), B(i.totalswap),
		B(i.totalswap-i.freeswap), B(i.freeswap));
	/*
	 * Tagged format, for easy grepping and expansion.
	 * The above will go away eventually, once the tools
	 * have been updated.
	 */
	len += sprintf(page+len,
		"MemTotal:     %8lu kB\n"
		"MemFree:      %8lu kB\n"
		"MemShared:    %8lu kB\n"
		"Buffers:      %8lu kB\n"
		"Cached:       %8lu kB\n"
		"SwapCached:   %8lu kB\n"
		"Active:       %8u kB\n"
		"Inactive:     %8u kB\n"
		"HighTotal:    %8lu kB\n"
		"HighFree:     %8lu kB\n"
		"LowTotal:     %8lu kB\n"
		"LowFree:      %8lu kB\n"
		"SwapTotal:    %8lu kB\n"
		"SwapFree:     %8lu kB\n"
		"Committed_AS: %8u kB\n",
		K(i.totalram),
		K(i.freeram),
		K(i.sharedram),
		K(i.bufferram),
		K(pg_size - swapper_space.nrpages),
		K(swapper_space.nrpages),
		K(nr_active_pages),
		K(nr_inactive_pages),
		K(i.totalhigh),
		K(i.freehigh),
		K(i.totalram-i.totalhigh),
		K(i.freeram-i.freehigh),
		K(i.totalswap),
		K(i.freeswap),
		K(committed));

	return proc_calc_metrics(page, start, off, count, eof, len);
#undef B
#undef K
}
Example #9
0
double BasicGeometry :: computeLineDistance(const FloatArray &iP1, const FloatArray &iP2, const FloatArray &iQ1, const FloatArray &iQ2)
{
    FloatArray u;
    u.beDifferenceOf(iP2, iP1);

    const double LengthP = u.computeNorm();

    FloatArray v;
    v.beDifferenceOf(iQ2, iQ1);
    const double LengthQ = v.computeNorm();


    // Regularization coefficients (to make it possible to solve when lines are parallel)
    const double c1 = (1.0e-14)*LengthP*LengthP;
    const double c2 = (1.0e-14)*LengthQ*LengthQ;

    const size_t minIter = 2;
    const size_t maxIter = 5;
    const double absTol = 1.0e-12;

    double xi = 0.0, eta = 0.0;

    FloatArray d;
    d = iP1;
    d.add(xi,u);
    d.add(-1.0, iQ1);
    d.add(-eta, v);

    FloatMatrix K(2,2), KInv;
    FloatArray dXi;

    bool lockXi = false, lockEta = false;

    for(size_t iter = 0; iter < maxIter; iter++) {

        if(xi < 0.0) {
            xi = 0.0;
            lockXi = true;
        }

        if(xi > 1.0) {
            xi = 1.0;
            lockXi = true;
        }


        if(eta < 0.0) {
            eta = 0.0;
            lockEta = true;
        }

        if(eta > 1.0) {
            eta = 1.0;
            lockEta = true;
        }

        FloatArray R = {   d.dotProduct(u) + c1*xi,
                          -d.dotProduct(v) + c2*eta};

        if(lockXi) {
            R[0] = 0.0;
        }

        if(lockEta) {
            R[1] = 0.0;
        }

        const double res = R.computeNorm();
//        printf("iter: %lu res: %e\n", iter, res);

        if(res < absTol && iter >= minIter) {
//            printf("xi: %e eta: %e\n", xi, eta);
            break;
        }

        K(0,0) = -u.dotProduct(u)-c1;
        K(0,1) =  u.dotProduct(v);
        K(1,0) =  u.dotProduct(v);
        K(1,1) = -v.dotProduct(v)-c2;


        if(lockXi) {
            K(0,0) = -1.0;
            K(0,1) = K(1,0) = 0.0;
        }

        if(lockEta) {
            K(0,1) = K(1,0) = 0.0;
            K(1,1) = -1.0;
        }


        KInv.beInverseOf(K);

        dXi.beProductOf(KInv, R);

        xi  += dXi[0];
        eta += dXi[1];

        d = iP1;
        d.add(xi,u);
        d.add(-1.0, iQ1);
        d.add(-eta, v);
    }

    if(xi < 0.0) {
        xi = 0.0;
    }

    if(xi > 1.0) {
        xi = 1.0;
    }

    if(eta < 0.0) {
        eta = 0.0;
    }

    if(eta > 1.0) {
        eta = 1.0;
    }

    d = iP1;
    d.add(xi,u);
    d.add(-1.0, iQ1);
    d.add(-eta, v);

    const double dist = d.computeNorm();

    return dist;
}
Example #10
0
void
event_loop(const int *quit)
{
	/* TODO: refactor this function event_loop(). */

	LOG_FUNC_ENTER;

	const wchar_t *const prev_input_buf = curr_input_buf;
	const size_t *const prev_input_buf_pos = curr_input_buf_pos;

	wchar_t input_buf[128];
	size_t input_buf_pos;

	int last_result = 0;
	int wait_for_enter = 0;
	int wait_for_suggestion = 0;
	int timeout = cfg.timeout_len;

	input_buf[0] = L'\0';
	input_buf_pos = 0;
	curr_input_buf = &input_buf[0];
	curr_input_buf_pos = &input_buf_pos;

	/* Make sure to set the working directory once in order to have the
	 * desired state even before any events are processed. */
	(void)vifm_chdir(flist_get_dir(curr_view));

	while(!*quit)
	{
		wint_t c;
		size_t counter;
		int got_input;

		lwin.user_selection = 1;
		rwin.user_selection = 1;

		modes_pre();

		/* Waits for timeout then skips if no key press.  Short-circuit if we're not
		 * waiting for the next key after timeout. */
		do
		{
			const int actual_timeout = wait_for_suggestion
			                         ? MIN(timeout, cfg.sug.delay)
			                         : timeout;

			if(!ensure_term_is_ready())
			{
				wait_for_enter = 0;
				continue;
			}

			modes_periodic();

			bg_check();

			got_input = (get_char_async_loop(status_bar, &c, actual_timeout) != ERR);

			/* If suggestion delay timed out, reset it and wait the rest of the
			 * timeout. */
			if(!got_input && wait_for_suggestion)
			{
				wait_for_suggestion = 0;
				timeout -= actual_timeout;
				display_suggestion_box(input_buf);
				continue;
			}
			wait_for_suggestion = 0;

			if(!got_input && (input_buf_pos == 0 || last_result == KEYS_WAIT))
			{
				timeout = cfg.timeout_len;
				continue;
			}

			if(got_input && c == K(KEY_RESIZE))
			{
				modes_redraw();
				continue;
			}

			break;
		}
		while(1);

		suggestions_are_visible = 0;

		/* Ensure that current working directory is set correctly (some pieces of
		 * code rely on this, e.g. %c macro in current directory). */
		(void)vifm_chdir(flist_get_dir(curr_view));

		if(got_input)
		{
			if(wait_for_enter)
			{
				wait_for_enter = 0;
				curr_stats.save_msg = 0;
				ui_sb_clear();
				if(c == WC_CR)
				{
					continue;
				}
			}

			if(c == WC_C_z)
			{
				ui_shutdown();
				stop_process();
				continue;
			}

			if(input_buf_pos < ARRAY_LEN(input_buf) - 2)
			{
				input_buf[input_buf_pos++] = c;
				input_buf[input_buf_pos] = L'\0';
			}
			else
			{
				/* Recover from input buffer overflow by resetting its contents. */
				reset_input_buf(input_buf, &input_buf_pos);
				clear_input_bar();
				continue;
			}
		}

		counter = vle_keys_counter();
		if(!got_input && last_result == KEYS_WAIT_SHORT)
		{
			hide_suggestion_box();

			last_result = vle_keys_exec_timed_out(input_buf);
			counter = vle_keys_counter() - counter;
			assert(counter <= input_buf_pos);
			if(counter > 0)
			{
				memmove(input_buf, input_buf + counter,
						(wcslen(input_buf) - counter + 1)*sizeof(wchar_t));
			}
		}
		else
		{
			if(got_input)
			{
				curr_stats.save_msg = 0;
			}

			if(last_result == KEYS_WAIT || last_result == KEYS_WAIT_SHORT)
			{
				hide_suggestion_box();
			}

			last_result = vle_keys_exec(input_buf);

			counter = vle_keys_counter() - counter;
			assert(counter <= input_buf_pos);
			if(counter > 0)
			{
				input_buf_pos -= counter;
				memmove(input_buf, input_buf + counter,
						(wcslen(input_buf) - counter + 1)*sizeof(wchar_t));
			}

			if(last_result == KEYS_WAIT || last_result == KEYS_WAIT_SHORT)
			{
				if(should_display_suggestion_box())
				{
					wait_for_suggestion = 1;
				}

				if(got_input)
				{
					modupd_input_bar(input_buf);
				}

				if(last_result == KEYS_WAIT_SHORT && wcscmp(input_buf, L"\033") == 0)
				{
					timeout = 1;
				}

				if(counter > 0)
				{
					clear_input_bar();
				}

				if(!curr_stats.save_msg && curr_view->selected_files &&
						!vle_mode_is(CMDLINE_MODE))
				{
					print_selected_msg();
				}
				continue;
			}
		}

		timeout = cfg.timeout_len;

		process_scheduled_updates();

		reset_input_buf(input_buf, &input_buf_pos);
		clear_input_bar();

		if(ui_sb_multiline())
		{
			wait_for_enter = 1;
			update_all_windows();
			continue;
		}

		/* Ensure that current working directory is set correctly (some pieces of
		 * code rely on this).  PWD could be changed during command execution, but
		 * it should be correct for modes_post() in case of preview modes. */
		(void)vifm_chdir(flist_get_dir(curr_view));
		modes_post();
	}

	curr_input_buf = prev_input_buf;
	curr_input_buf_pos = prev_input_buf_pos;
}
Example #11
0
int bench_openmp(FILE *infile, int n, int m, int p,
    C (*kernel)(R, int, const R *), R c, R eps_I, R eps_B)
{
  fastsum_plan my_fastsum_plan;
  int d, L, M;
  int t, j;
  R re, im;
  R r_max = K(0.25) - my_fastsum_plan.eps_B / K(2.0);
  ticks t0, t1;
  R tt_total;

  fscanf(infile, "%d %d %d", &d, &L, &M);

#ifdef _OPENMP
  FFTW(import_wisdom_from_filename)("fastsum_benchomp_detail_threads.plan");
#else
  FFTW(import_wisdom_from_filename)("fastsum_benchomp_detail_single.plan");
#endif

  fastsum_init_guru(&my_fastsum_plan, d, L, M, kernel, &c, NEARFIELD_BOXES, n,
      m, p, eps_I, eps_B);

#ifdef _OPENMP
  FFTW(export_wisdom_to_filename)("fastsum_benchomp_detail_threads.plan");
#else
  FFTW(export_wisdom_to_filename)("fastsum_benchomp_detail_single.plan");
#endif

  for (j = 0; j < L; j++)
  {
    for (t = 0; t < d; t++)
    {
      R v;
      fscanf(infile, __FR__, &v);
      my_fastsum_plan.x[d * j + t] = v * r_max;
    }
  }

  for (j = 0; j < L; j++)
  {
    fscanf(infile, __FR__ " " __FR__, &re, &im);
    my_fastsum_plan.alpha[j] = re + II * im;
  }

  for (j = 0; j < M; j++)
  {
    for (t = 0; t < d; t++)
    {
      R v;
      fscanf(infile, __FR__, &v);
      my_fastsum_plan.y[d * j + t] = v * r_max;
    }
  }

  /** precomputation */
  t0 = getticks();
  fastsum_precompute(&my_fastsum_plan);

  /** fast computation */
  fastsum_trafo(&my_fastsum_plan);
  t1 = getticks();
  tt_total = NFFT(elapsed_seconds)(t1, t0);

#ifndef MEASURE_TIME
  my_fastsum_plan.MEASURE_TIME_t[0] = K(0.0);
  my_fastsum_plan.MEASURE_TIME_t[1] = K(0.0);
  my_fastsum_plan.MEASURE_TIME_t[2] = K(0.0);
  my_fastsum_plan.MEASURE_TIME_t[3] = K(0.0);
  my_fastsum_plan.MEASURE_TIME_t[4] = K(0.0);
  my_fastsum_plan.MEASURE_TIME_t[5] = K(0.0);
  my_fastsum_plan.MEASURE_TIME_t[6] = K(0.0);
  my_fastsum_plan.MEASURE_TIME_t[7] = K(0.0);
  my_fastsum_plan.mv1.MEASURE_TIME_t[0] = K(0.0);
  my_fastsum_plan.mv1.MEASURE_TIME_t[2] = K(0.0);
  my_fastsum_plan.mv2.MEASURE_TIME_t[0] = K(0.0);
  my_fastsum_plan.mv2.MEASURE_TIME_t[2] = K(0.0);
#endif
#ifndef MEASURE_TIME_FFTW
  my_fastsum_plan.mv1.MEASURE_TIME_t[1] = K(0.0);
  my_fastsum_plan.mv2.MEASURE_TIME_t[1] = K(0.0);
#endif

  printf(
      "%.6" __FES__ " %.6" __FES__ " %.6" __FES__ " %6" __FES__ " %.6" __FES__ " %.6" __FES__ " %.6" __FES__ " %.6" __FES__ " %.6" __FES__ " %6" __FES__ " %.6" __FES__ " %.6" __FES__ " %6" __FES__ " %.6" __FES__ " %.6" __FES__ " %6" __FES__ "\n",
      my_fastsum_plan.MEASURE_TIME_t[0], my_fastsum_plan.MEASURE_TIME_t[1],
      my_fastsum_plan.MEASURE_TIME_t[2], my_fastsum_plan.MEASURE_TIME_t[3],
      my_fastsum_plan.MEASURE_TIME_t[4], my_fastsum_plan.MEASURE_TIME_t[5],
      my_fastsum_plan.MEASURE_TIME_t[6], my_fastsum_plan.MEASURE_TIME_t[7],
      tt_total - my_fastsum_plan.MEASURE_TIME_t[0]
          - my_fastsum_plan.MEASURE_TIME_t[1]
          - my_fastsum_plan.MEASURE_TIME_t[2]
          - my_fastsum_plan.MEASURE_TIME_t[3]
          - my_fastsum_plan.MEASURE_TIME_t[4]
          - my_fastsum_plan.MEASURE_TIME_t[5]
          - my_fastsum_plan.MEASURE_TIME_t[6]
          - my_fastsum_plan.MEASURE_TIME_t[7], tt_total,
      my_fastsum_plan.mv1.MEASURE_TIME_t[0],
      my_fastsum_plan.mv1.MEASURE_TIME_t[1],
      my_fastsum_plan.mv1.MEASURE_TIME_t[2],
      my_fastsum_plan.mv2.MEASURE_TIME_t[0],
      my_fastsum_plan.mv2.MEASURE_TIME_t[1],
      my_fastsum_plan.mv2.MEASURE_TIME_t[2]);

  fastsum_finalize(&my_fastsum_plan);

  return 0;
}
Example #12
0
/* Sub-loop of the main loop that "asynchronously" queries for the input
 * performing the following tasks while waiting for input:
 *  - checks for new IPC messages;
 *  - checks whether contents of displayed directories changed;
 *  - redraws UI if requested.
 * Returns KEY_CODE_YES for functional keys (preprocesses *c in this case), OK
 * for wide character and ERR otherwise (e.g. after timeout). */
static int
get_char_async_loop(WINDOW *win, wint_t *c, int timeout)
{
	const int IPC_F = ipc_enabled() ? 10 : 1;

	do
	{
		int i;

		int delay_slice = DIV_ROUND_UP(MIN(cfg.min_timeout_len, timeout), IPC_F);
#ifdef __PDCURSES__
		/* pdcurses performs delays in 50 ms intervals (1/20 of a second). */
		delay_slice = MAX(50, delay_slice);
#endif

		if(should_check_views_for_changes())
		{
			check_view_for_changes(curr_view);
			check_view_for_changes(other_view);
		}

		process_scheduled_updates();

		for(i = 0; i < IPC_F && timeout > 0; ++i)
		{
			int result;

			ipc_check(curr_stats.ipc);
			wtimeout(win, delay_slice);
			timeout -= delay_slice;

			if(suggestions_are_visible)
			{
				/* Redraw suggestion box as it might have been hidden due to other
				 * redraws. */
				display_suggestion_box(curr_input_buf);
			}

			/* Update cursor before waiting for input.  Modes set cursor correctly
			 * within corresponding windows, but we need to call refresh on one of
			 * them to make it active. */
			update_hardware_cursor();

			result = compat_wget_wch(win, c);
			if(result != ERR)
			{
				if(result == KEY_CODE_YES)
				{
					*c = K(*c);
				}
				else if(*c == L'\0')
				{
					*c = WC_C_SPACE;
				}
				return result;
			}

			process_scheduled_updates();
		}
	}
	while(timeout > 0);

	return ERR;
}
Example #13
0
const Matrix&
FourNodeQuad3d::getInitialStiff()
{
  K.Zero();
  
  double dvol;
  double DB[3][2];
  
  // Loop over the integration points
  for (int i = 0; i < 4; i++) {
    
    // Determine Jacobian for this integration point
    dvol = this->shapeFunction(pts[i][0], pts[i][1]);
    dvol *= (thickness*wts[i]);
    
    // Get the material tangent
    const Matrix &D = theMaterial[i]->getInitialTangent();

    double D00 = D(0,0); double D01 = D(0,1); double D02 = D(0,2);
    double D10 = D(1,0); double D11 = D(1,1); double D12 = D(1,2);
    double D20 = D(2,0); double D21 = D(2,1); double D22 = D(2,2);
    
    // Perform numerical integration
    //K = K + (B^ D * B) * intWt(i)*intWt(j) * detJ;
    //K.addMatrixTripleProduct(1.0, B, D, intWt(i)*intWt(j)*detJ);

    /* **********************************************************************
    for (int beta = 0, ib = 0, colIb =0, colIbP1 = 8; 
	 beta < 4; 
	 beta++, ib += 2, colIb += 16, colIbP1 += 16) {
      
      for (int alpha = 0, ia = 0; alpha < 4; alpha++, ia += 2) {
	
	DB[0][0] = dvol * (D00 * shp[0][beta] + D02 * shp[1][beta]);
	DB[1][0] = dvol * (D10 * shp[0][beta] + D12 * shp[1][beta]);
	DB[2][0] = dvol * (D20 * shp[0][beta] + D22 * shp[1][beta]);
	DB[0][1] = dvol * (D01 * shp[1][beta] + D02 * shp[0][beta]);
	DB[1][1] = dvol * (D11 * shp[1][beta] + D12 * shp[0][beta]);
	DB[2][1] = dvol * (D21 * shp[1][beta] + D22 * shp[0][beta]);

	K(ia,ib) += shp[0][alpha]*DB[0][0] + shp[1][alpha]*DB[2][0];
	K(ia,ib+diff) += shp[0][alpha]*DB[0][1] + shp[1][alpha]*DB[2][1];
	K(ia+diff,ib) += shp[1][alpha]*DB[1][0] + shp[0][alpha]*DB[2][0];
	K(ia+diff,ib+diff) += shp[1][alpha]*DB[1][1] + shp[0][alpha]*DB[2][1];
	
	matrixData[colIb   +   ia] += shp[0][alpha]*DB[0][0] + shp[1][alpha]*DB[2][0];
	matrixData[colIbP1 +   ia] += shp[0][alpha]*DB[0][1] + shp[1][alpha]*DB[2][1];
	matrixData[colIb   + ia+1] += shp[1][alpha]*DB[1][0] + shp[0][alpha]*DB[2][0];
	matrixData[colIbP1 + ia+1] += shp[1][alpha]*DB[1][1] + shp[0][alpha]*DB[2][1];
      }
    }
    }

    Ki = new Matrix(K);
    return K;
    ************************************************************************** */

    int diff = dirn[1]-dirn[0];
    
    for (int alpha = 0, ia = dirn[0]; alpha < 4; alpha++, ia += 3) {
      for (int beta = 0, ib = dirn[0]; beta < 4; beta++, ib += 3) {
	
	DB[0][0] = dvol * (D00 * shp[0][beta] + D02 * shp[1][beta]);
	DB[1][0] = dvol * (D10 * shp[0][beta] + D12 * shp[1][beta]);
	DB[2][0] = dvol * (D20 * shp[0][beta] + D22 * shp[1][beta]);
	DB[0][1] = dvol * (D01 * shp[1][beta] + D02 * shp[0][beta]);
	DB[1][1] = dvol * (D11 * shp[1][beta] + D12 * shp[0][beta]);
	DB[2][1] = dvol * (D21 * shp[1][beta] + D22 * shp[0][beta]);
	
	
	K(ia,ib) += shp[0][alpha]*DB[0][0] + shp[1][alpha]*DB[2][0];
	K(ia,ib+diff) += shp[0][alpha]*DB[0][1] + shp[1][alpha]*DB[2][1];
	K(ia+diff,ib) += shp[1][alpha]*DB[1][0] + shp[0][alpha]*DB[2][0];
	K(ia+diff,ib+diff) += shp[1][alpha]*DB[1][1] + shp[0][alpha]*DB[2][1];
      }
    }
  }

  return K;
}
Example #14
0
void Image3D::GenNewViews(){
	char fn[128];
	static int no = 0;

	Eigen::Matrix3d R, R_, K, K_, H;
	Eigen::Vector3d t;
	cam.GetK(K);
	cam.GetRT(R, t);

	double scale = 2.0;
	double scale_ = 1.0 / scale, scale2_ = scale_ * scale_;
	int w_ = cam.W(), w = w_ * scale;
	int h_ = cam.H(), h = h_ * scale;

	K_(0, 0) = 1.0 / K(0, 0); K_(0, 1) = 0.0; K_(0, 2) = -K(0, 2) / K(0, 0);
	K_(1, 0) = 0.0; K_(1, 1) = 1.0 / K(1, 1); K_(1, 2) = -K(1, 2) / K(1, 1);
	K_(2, 0) = 0.0; K_(2, 1) = 0.0; K_(2, 2) = 1.0;
	//K_ = K.inverse();

	//Eigen::Vector3d axis(R(axis, 0), R(axis, 1), R(axis, 2));
	Eigen::Vector3d axis(R(ParamParser::axis, 0), R(ParamParser::axis, 1), R(ParamParser::axis, 2));

	std::vector<double> angle;
	for (int i = ParamParser::view_count / 2; i > 0; --i){ angle.push_back(-ParamParser::rot_angle * i); }
	for (int i = 0; i <= ParamParser::view_count / 2; ++i){ angle.push_back(ParamParser::rot_angle * i); }

	std::cout << "Generating views#: ";
	for (int k = 0; k < ParamParser::view_count; ++k){
		std::cout << k << " ";

		std::vector<int> texIndex_(w_ * h_, -1);
		cv::Mat img(h_, w_, CV_8UC3);

		RotationMatrix(angle[k] / 180 * M_PI, axis, R_);

		H = K * (R_ * K_);

		std::vector<Eigen::Vector2d> xy(w * h);
		double minu, minv, maxu, maxv;
		minu = minv = 1000000000.0;
		maxu = maxv = -1000000000.0;
		for (int i = 0; i < w * h; ++i){
			int u = i % w - w * scale2_;
			int v = i / w - h * scale2_;
			double wf = H(2, 0) * u + H(2, 1) * v + H(2, 2);
			double uf = (H(0, 0) * u + H(0, 1) * v + H(0, 2)) / wf;
			double vf = (H(1, 0) * u + H(1, 1) * v + H(1, 2)) / wf;
			if (CheckRange(uf, vf, w_, h_)){
				minu = min(minu, u + w * scale2_);
				minv = min(minv, v + h * scale2_);
				maxu = max(maxu, u + w * scale2_);
				maxv = max(maxv, v + h * scale2_);
			}
			xy[i] = Eigen::Vector2d(uf, vf);
		}
		double centerx = (maxu + minu) * 0.5;
		double centery = (maxv + minv) * 0.5;
		double offsetx = centerx - w * scale2_;
		double offsety = centery - h * scale2_;


		for (int i = 0; i < w * h; ++i){
			double uf = xy[i][0];
			double vf = xy[i][1];

			double u11 = floor(uf), v11 = floor(vf);
			double u22 = ceil(uf), v22 = ceil(vf);
			int u = int(i % w - offsetx + 0.5);
			int v = int(i / w - offsety + 0.5);
			if (CheckRange(u11, v11, w_, h_) && CheckRange(u22, v22, w_, h_) && CheckRange(u, v, w_, h_)){
				if (fabs(u11 - u22) <= 1e-9 && fabs(v11 - v22) <= 1e-9){
					img.at<cv::Vec3b>(v, u) = image.at<cv::Vec3b>(v11, u11);
					texIndex_[v * w_ + u] = (v11 * w_ + u11);
				}
				else{
					cv::Vec3b rgb11 = image.at<cv::Vec3b>(v11, u11);
					cv::Vec3b rgb12 = image.at<cv::Vec3b>(v22, u11);
					cv::Vec3b rgb21 = image.at<cv::Vec3b>(v11, u22);
					cv::Vec3b rgb22 = image.at<cv::Vec3b>(v22, u22);
					cv::Vec3b rgb;
					if (fabs(u11 - u22) <= 1e-9){
						double s1 = (vf - v11) / (v22 - v11);
						double s2 = 1 - s1;
						rgb[0] = uchar(rgb11[0] * s2 + rgb12[0] * s1);
						rgb[1] = uchar(rgb11[1] * s2 + rgb12[1] * s1);
						rgb[2] = uchar(rgb11[2] * s2 + rgb12[2] * s1);
					}
					else if (fabs(v11 - v22) <= 1e-9){
						double s1 = (uf - u11) / (u22 - u11);
						double s2 = 1 - s1;
						rgb[0] = uchar(rgb11[0] * s2 + rgb21[0] * s1);
						rgb[1] = uchar(rgb11[1] * s2 + rgb21[1] * s1);
						rgb[2] = uchar(rgb11[2] * s2 + rgb21[2] * s1);
					}
					else{
						double s1 = (u22 - uf) * (v22 - vf);
						double s2 = (uf - u11) * (v22 - vf);
						double s3 = (u22 - uf) * (vf - v11);
						double s4 = (uf - u11) * (vf - v11);
						rgb[0] = uchar(rgb11[0] * s1 + rgb21[0] * s2 + rgb12[0] * s3 + rgb22[0] * s4);
						rgb[1] = uchar(rgb11[1] * s1 + rgb21[1] * s2 + rgb12[1] * s3 + rgb22[1] * s4);
						rgb[2] = uchar(rgb11[2] * s1 + rgb21[2] * s2 + rgb12[2] * s3 + rgb22[2] * s4);
					}
					img.at<cv::Vec3b>(v, u) = rgb;
					texIndex_[v * w_ + u] = (int(vf + 0.5) * w_ + int(uf + 0.5));
				}
			}
		}
		texIndex.push_back(texIndex_);
		sprintf_s(fn, "%s/proj%d_%d.jpg", path.c_str(), frmNo, k);
		cv::imwrite(fn, img);
	}
	std::cout << std::endl;
}
Example #15
0
/*
* CAST-256 Key Schedule
*/
void CAST_256::key_schedule(const byte key[], size_t length)
   {
   static const u32bit KEY_MASK[192] = {
      0x5A827999, 0xC95C653A, 0x383650DB, 0xA7103C7C, 0x15EA281D, 0x84C413BE,
      0xF39DFF5F, 0x6277EB00, 0xD151D6A1, 0x402BC242, 0xAF05ADE3, 0x1DDF9984,
      0x8CB98525, 0xFB9370C6, 0x6A6D5C67, 0xD9474808, 0x482133A9, 0xB6FB1F4A,
      0x25D50AEB, 0x94AEF68C, 0x0388E22D, 0x7262CDCE, 0xE13CB96F, 0x5016A510,
      0xBEF090B1, 0x2DCA7C52, 0x9CA467F3, 0x0B7E5394, 0x7A583F35, 0xE9322AD6,
      0x580C1677, 0xC6E60218, 0x35BFEDB9, 0xA499D95A, 0x1373C4FB, 0x824DB09C,
      0xF1279C3D, 0x600187DE, 0xCEDB737F, 0x3DB55F20, 0xAC8F4AC1, 0x1B693662,
      0x8A432203, 0xF91D0DA4, 0x67F6F945, 0xD6D0E4E6, 0x45AAD087, 0xB484BC28,
      0x235EA7C9, 0x9238936A, 0x01127F0B, 0x6FEC6AAC, 0xDEC6564D, 0x4DA041EE,
      0xBC7A2D8F, 0x2B541930, 0x9A2E04D1, 0x0907F072, 0x77E1DC13, 0xE6BBC7B4,
      0x5595B355, 0xC46F9EF6, 0x33498A97, 0xA2237638, 0x10FD61D9, 0x7FD74D7A,
      0xEEB1391B, 0x5D8B24BC, 0xCC65105D, 0x3B3EFBFE, 0xAA18E79F, 0x18F2D340,
      0x87CCBEE1, 0xF6A6AA82, 0x65809623, 0xD45A81C4, 0x43346D65, 0xB20E5906,
      0x20E844A7, 0x8FC23048, 0xFE9C1BE9, 0x6D76078A, 0xDC4FF32B, 0x4B29DECC,
      0xBA03CA6D, 0x28DDB60E, 0x97B7A1AF, 0x06918D50, 0x756B78F1, 0xE4456492,
      0x531F5033, 0xC1F93BD4, 0x30D32775, 0x9FAD1316, 0x0E86FEB7, 0x7D60EA58,
      0xEC3AD5F9, 0x5B14C19A, 0xC9EEAD3B, 0x38C898DC, 0xA7A2847D, 0x167C701E,
      0x85565BBF, 0xF4304760, 0x630A3301, 0xD1E41EA2, 0x40BE0A43, 0xAF97F5E4,
      0x1E71E185, 0x8D4BCD26, 0xFC25B8C7, 0x6AFFA468, 0xD9D99009, 0x48B37BAA,
      0xB78D674B, 0x266752EC, 0x95413E8D, 0x041B2A2E, 0x72F515CF, 0xE1CF0170,
      0x50A8ED11, 0xBF82D8B2, 0x2E5CC453, 0x9D36AFF4, 0x0C109B95, 0x7AEA8736,
      0xE9C472D7, 0x589E5E78, 0xC7784A19, 0x365235BA, 0xA52C215B, 0x14060CFC,
      0x82DFF89D, 0xF1B9E43E, 0x6093CFDF, 0xCF6DBB80, 0x3E47A721, 0xAD2192C2,
      0x1BFB7E63, 0x8AD56A04, 0xF9AF55A5, 0x68894146, 0xD7632CE7, 0x463D1888,
      0xB5170429, 0x23F0EFCA, 0x92CADB6B, 0x01A4C70C, 0x707EB2AD, 0xDF589E4E,
      0x4E3289EF, 0xBD0C7590, 0x2BE66131, 0x9AC04CD2, 0x099A3873, 0x78742414,
      0xE74E0FB5, 0x5627FB56, 0xC501E6F7, 0x33DBD298, 0xA2B5BE39, 0x118FA9DA,
      0x8069957B, 0xEF43811C, 0x5E1D6CBD, 0xCCF7585E, 0x3BD143FF, 0xAAAB2FA0,
      0x19851B41, 0x885F06E2, 0xF738F283, 0x6612DE24, 0xD4ECC9C5, 0x43C6B566,
      0xB2A0A107, 0x217A8CA8, 0x90547849, 0xFF2E63EA, 0x6E084F8B, 0xDCE23B2C,
      0x4BBC26CD, 0xBA96126E, 0x296FFE0F, 0x9849E9B0, 0x0723D551, 0x75FDC0F2,
      0xE4D7AC93, 0x53B19834, 0xC28B83D5, 0x31656F76, 0xA03F5B17, 0x0F1946B8 };

   static const byte KEY_ROT[32] = {
      0x13, 0x04, 0x15, 0x06, 0x17, 0x08, 0x19, 0x0A, 0x1B, 0x0C,
      0x1D, 0x0E, 0x1F, 0x10, 0x01, 0x12, 0x03, 0x14, 0x05, 0x16,
      0x07, 0x18, 0x09, 0x1A, 0x0B, 0x1C, 0x0D, 0x1E, 0x0F, 0x00,
      0x11, 0x02 };

   m_MK.resize(48);
   m_RK.resize(48);

   secure_vector<u32bit> K(8);
   for(size_t i = 0; i != length; ++i)
      K[i/4] = (K[i/4] << 8) + key[i];

   u32bit A = K[0], B = K[1], C = K[2], D = K[3],
          E = K[4], F = K[5], G = K[6], H = K[7];

   for(size_t i = 0; i != 48; i += 4)
      {
      round1(G, H, KEY_MASK[4*i+ 0], KEY_ROT[(4*i+ 0) % 32]);
      round2(F, G, KEY_MASK[4*i+ 1], KEY_ROT[(4*i+ 1) % 32]);
      round3(E, F, KEY_MASK[4*i+ 2], KEY_ROT[(4*i+ 2) % 32]);
      round1(D, E, KEY_MASK[4*i+ 3], KEY_ROT[(4*i+ 3) % 32]);
      round2(C, D, KEY_MASK[4*i+ 4], KEY_ROT[(4*i+ 4) % 32]);
      round3(B, C, KEY_MASK[4*i+ 5], KEY_ROT[(4*i+ 5) % 32]);
      round1(A, B, KEY_MASK[4*i+ 6], KEY_ROT[(4*i+ 6) % 32]);
      round2(H, A, KEY_MASK[4*i+ 7], KEY_ROT[(4*i+ 7) % 32]);
      round1(G, H, KEY_MASK[4*i+ 8], KEY_ROT[(4*i+ 8) % 32]);
      round2(F, G, KEY_MASK[4*i+ 9], KEY_ROT[(4*i+ 9) % 32]);
      round3(E, F, KEY_MASK[4*i+10], KEY_ROT[(4*i+10) % 32]);
      round1(D, E, KEY_MASK[4*i+11], KEY_ROT[(4*i+11) % 32]);
      round2(C, D, KEY_MASK[4*i+12], KEY_ROT[(4*i+12) % 32]);
      round3(B, C, KEY_MASK[4*i+13], KEY_ROT[(4*i+13) % 32]);
      round1(A, B, KEY_MASK[4*i+14], KEY_ROT[(4*i+14) % 32]);
      round2(H, A, KEY_MASK[4*i+15], KEY_ROT[(4*i+15) % 32]);

      m_RK[i  ] = (A % 32);
      m_RK[i+1] = (C % 32);
      m_RK[i+2] = (E % 32);
      m_RK[i+3] = (G % 32);
      m_MK[i  ] = H;
      m_MK[i+1] = F;
      m_MK[i+2] = D;
      m_MK[i+3] = B;
      }
   }
Example #16
0
QString Fixture::status() const
{
    QString info;
    QString t;

    QString title("<TR><TD CLASS='hilite' COLSPAN='3'>%1</TD></TR>");
    QString subTitle("<TR><TD CLASS='subhi' COLSPAN='3'>%1</TD></TR>");
    QString genInfo("<TR><TD CLASS='emphasis'>%1</TD><TD COLSPAN='2'>%2</TD></TR>");

    /********************************************************************
     * General info
     ********************************************************************/

    info += "<TABLE COLS='3' WIDTH='100%'>";

    // Fixture title
    info += title.arg(name());

    // Manufacturer
    if (isDimmer() == false)
    {
        info += genInfo.arg(tr("Manufacturer")).arg(m_fixtureDef->manufacturer());
        info += genInfo.arg(tr("Model")).arg(m_fixtureDef->model());
        info += genInfo.arg(tr("Mode")).arg(m_fixtureMode->name());
        info += genInfo.arg(tr("Type")).arg(m_fixtureDef->type());
    }
    else
    {
        info += genInfo.arg(tr("Type")).arg(tr("Generic Dimmer"));
    }

    // Universe
    info += genInfo.arg(tr("Universe")).arg(universe() + 1);

    // Address
    QString range = QString("%1 - %2").arg(address() + 1).arg(address() + channels());
    info += genInfo.arg(tr("Address Range")).arg(range);

    // Channels
    info += genInfo.arg(tr("Channels")).arg(channels());

    // Binary address
    QString binaryStr = QString("%1").arg(address() + 1, 10, 2, QChar('0'));
    QString dipTable("<TABLE COLS='33' cellspacing='0'><TR><TD COLSPAN='33'><IMG SRC=\"" ":/ds_top.png\"></TD></TR>");
    dipTable += "<TR><TD><IMG SRC=\"" ":/ds_border.png\"></TD><TD><IMG SRC=\"" ":/ds_border.png\"></TD>";
    for (int i = 9; i >= 0; i--)
    {
        if (binaryStr.at(i) == '0')
            dipTable += "<TD COLSPAN='3'><IMG SRC=\"" ":/ds_off.png\"></TD>";
        else
            dipTable += "<TD COLSPAN='3'><IMG SRC=\"" ":/ds_on.png\"></TD>";
    }
    dipTable += "<TD><IMG SRC=\"" ":/ds_border.png\"></TD></TR>";
    dipTable += "<TR><TD COLSPAN='33'><IMG SRC=\"" ":/ds_bottom.png\"></TD></TR>";
    dipTable += "</TABLE>";

    info += genInfo.arg(tr("Binary Address (DIP)"))
            .arg(QString("%1").arg(dipTable));

    /********************************************************************
     * Channels
     ********************************************************************/

    // Title row
    info += QString("<TR><TD CLASS='subhi'>%1</TD>").arg(tr("Channel"));
    info += QString("<TD CLASS='subhi'>%1</TD>").arg(tr("DMX"));
    info += QString("<TD CLASS='subhi'>%1</TD></TR>").arg(tr("Name"));

    // Fill table with the fixture's channels
    for (quint32 ch = 0; ch < channels();	ch++)
    {
        QString chInfo("<TR><TD>%1</TD><TD>%2</TD><TD>%3</TD></TR>");
        info += chInfo.arg(ch + 1).arg(address() + ch + 1)
                .arg(channel(ch)->name());
    }

    /********************************************************************
     * Extended device information for non-dimmers
     ********************************************************************/

    if (isDimmer() == false)
    {
        QLCPhysical physical = m_fixtureMode->physical();
        info += title.arg(tr("Physical"));

        float mmInch = 0.0393700787;
        float kgLbs = 2.20462262;
        QString mm("%1mm (%2\")");
        QString kg("%1kg (%2 lbs)");
        QString W("%1W");
        info += genInfo.arg(tr("Width")).arg(mm.arg(physical.width()))
                                        .arg(physical.width() * mmInch, 0, 'g', 4);
        info += genInfo.arg(tr("Height")).arg(mm.arg(physical.height()))
                                         .arg(physical.height() * mmInch, 0, 'g', 4);
        info += genInfo.arg(tr("Depth")).arg(mm.arg(physical.depth()))
                                        .arg(physical.depth() * mmInch, 0, 'g', 4);
        info += genInfo.arg(tr("Weight")).arg(kg.arg(physical.weight()))
                                         .arg(physical.weight() * kgLbs, 0, 'g', 4);
        info += genInfo.arg(tr("Power consumption")).arg(W.arg(physical.powerConsumption()));
        info += genInfo.arg(tr("DMX Connector")).arg(physical.dmxConnector());

        // Bulb
        QString K("%1K");
        QString lm("%1lm");
        info += subTitle.arg(tr("Bulb"));
        info += genInfo.arg(tr("Type")).arg(physical.bulbType());
        info += genInfo.arg(tr("Luminous Flux")).arg(lm.arg(physical.bulbLumens()));
        info += genInfo.arg(tr("Colour Temperature")).arg(K.arg(physical.bulbColourTemperature()));

        // Lens
        QString angle1("%1&deg;");
        QString angle2("%1&deg; &ndash; %2&deg;");

        info += subTitle.arg(tr("Lens"));
        info += genInfo.arg(tr("Name")).arg(physical.lensName());

        if (physical.lensDegreesMin() == physical.lensDegreesMax())
        {
            info += genInfo.arg(tr("Beam Angle"))
                .arg(angle1.arg(physical.lensDegreesMin()));
        }
        else
        {
            info += genInfo.arg(tr("Beam Angle"))
                .arg(angle2.arg(physical.lensDegreesMin())
                .arg(physical.lensDegreesMax()));
        }


        // Focus
        QString range("%1&deg;");
        info += subTitle.arg(tr("Focus"));
        info += genInfo.arg(tr("Type")).arg(physical.focusType());
        info += genInfo.arg(tr("Pan Range")).arg(range.arg(physical.focusPanMax()));
        info += genInfo.arg(tr("Tilt Range")).arg(range.arg(physical.focusTiltMax()));
    }

    // HTML document & table closure
    info += "</TABLE>";

    if (isDimmer() == false)
    {
        info += "<HR>";
        info += "<DIV CLASS='author' ALIGN='right'>";
        info += tr("Fixture definition author: ") + fixtureDef()->author();
        info += "</DIV>";
    }

    return info;
}
Example #17
0
inline TR sysperm(const T1& rho1, const arma::uvec& sys,
                   const arma::uvec& dim) {
  const auto& p = as_Mat(rho1);
  const arma::uword n = dim.n_elem;

  bool checkV = true;
  if (p.n_cols == 1)
    checkV = false;

#ifndef QICLIB_NO_DEBUG
  if (p.n_elem == 0)
    throw Exception("qic::sysperm", Exception::type::ZERO_SIZE);

  if (checkV)
    if (p.n_rows != p.n_cols)
      throw Exception("qic::sysperm",
                      Exception::type::MATRIX_NOT_SQUARE_OR_CVECTOR);

  if (dim.n_elem == 0 || arma::any(dim == 0))
    throw Exception("qic::sysperm", Exception::type::INVALID_DIMS);

  if (arma::prod(dim) != p.n_rows)
    throw Exception("qic::sysperm", Exception::type::DIMS_MISMATCH_MATRIX);

  if (n != sys.n_elem || arma::any(sys == 0) || arma::any(sys > n) ||
      sys.n_elem != arma::unique(sys).eval().n_elem)
    throw Exception("qic::sysperm", Exception::type::PERM_INVALID);
#endif

  arma::uword product[_internal::MAXQDIT];
  product[n-1] = 1;
  for (arma::sword i = n - 2; i >= 0; --i)
    product[i] = product[i + 1] * dim.at(i + 1);

  arma::uword productr[_internal::MAXQDIT];
  productr[n-1] = 1;
  for (arma::sword i = n - 2; i >= 0; --i)
    productr[i] = productr[i + 1] * dim.at(sys.at(i + 1) - 1);

  if (checkV) {
    arma::Mat<trait::eT<T1> > p_r(p.n_rows, p.n_cols, arma::fill::zeros);

    const arma::uword loop_no = 2 * n;
    constexpr auto loop_no_buffer = 2 * _internal::MAXQDIT + 1;
    arma::uword loop_counter[loop_no_buffer] = {0};
    arma::uword MAX[loop_no_buffer];

    for (arma::uword i = 0; i < n; ++i) {
      MAX[i] = dim.at(i);
      MAX[i + n] = dim.at(i);
    }
    MAX[loop_no] = 2;

    arma::uword p1 = 0;

    while (loop_counter[loop_no] == 0) {
      arma::uword I(0), J(0), K(0), L(0);
      for (arma::uword i = 0; i < n; ++i) {
        I += product[i] * loop_counter[i];
        J += product[i] * loop_counter[i + n];
        K += productr[i] * loop_counter[sys.at(i) - 1];
        L += productr[i] * loop_counter[sys.at(i) + n - 1];
      }

      p_r.at(K, L) = p.at(I, J);

      ++loop_counter[0];
      while (loop_counter[p1] == MAX[p1]) {
        loop_counter[p1] = 0;
        loop_counter[++p1]++;
        if (loop_counter[p1] != MAX[p1])
          p1 = 0;
      }
    }
    return p_r;

  } else {
    arma::Col<trait::eT<T1> > p_r(p.n_rows, arma::fill::zeros);

    const arma::uword loop_no = n;
    constexpr auto loop_no_buffer = _internal::MAXQDIT + 1;
    arma::uword loop_counter[loop_no_buffer] = {0};
    arma::uword MAX[loop_no_buffer];

    for (arma::uword i = 0; i < n; ++i) MAX[i] = dim.at(i);
    MAX[loop_no] = 2;

    for (arma::uword i = 0; i < loop_no + 1; ++i) loop_counter[i] = 0;

    arma::uword p1 = 0;

    while (loop_counter[loop_no] == 0) {
      arma::uword I(0), K(0);
      for (arma::uword i = 0; i < n; ++i) {
        I += product[i] * loop_counter[i];
        K += productr[i] * loop_counter[sys.at(i) - 1];
      }

      p_r.at(K) = p.at(I);

      ++loop_counter[0];
      while (loop_counter[p1] == MAX[p1]) {
        loop_counter[p1] = 0;
        loop_counter[++p1]++;
        if (loop_counter[p1] != MAX[p1])
          p1 = 0;
      }
    }

    return p_r;
  }
}
Example #18
0
static void
sha1_step(struct sha1_ctxt * ctxt)
{
	uint32		a,
				b,
				c,
				d,
				e;
	size_t		t,
				s;
	uint32		tmp;

#if BYTE_ORDER == LITTLE_ENDIAN
	struct sha1_ctxt tctxt;

	memmove(&tctxt.m.b8[0], &ctxt->m.b8[0], 64);
	ctxt->m.b8[0] = tctxt.m.b8[3];
	ctxt->m.b8[1] = tctxt.m.b8[2];
	ctxt->m.b8[2] = tctxt.m.b8[1];
	ctxt->m.b8[3] = tctxt.m.b8[0];
	ctxt->m.b8[4] = tctxt.m.b8[7];
	ctxt->m.b8[5] = tctxt.m.b8[6];
	ctxt->m.b8[6] = tctxt.m.b8[5];
	ctxt->m.b8[7] = tctxt.m.b8[4];
	ctxt->m.b8[8] = tctxt.m.b8[11];
	ctxt->m.b8[9] = tctxt.m.b8[10];
	ctxt->m.b8[10] = tctxt.m.b8[9];
	ctxt->m.b8[11] = tctxt.m.b8[8];
	ctxt->m.b8[12] = tctxt.m.b8[15];
	ctxt->m.b8[13] = tctxt.m.b8[14];
	ctxt->m.b8[14] = tctxt.m.b8[13];
	ctxt->m.b8[15] = tctxt.m.b8[12];
	ctxt->m.b8[16] = tctxt.m.b8[19];
	ctxt->m.b8[17] = tctxt.m.b8[18];
	ctxt->m.b8[18] = tctxt.m.b8[17];
	ctxt->m.b8[19] = tctxt.m.b8[16];
	ctxt->m.b8[20] = tctxt.m.b8[23];
	ctxt->m.b8[21] = tctxt.m.b8[22];
	ctxt->m.b8[22] = tctxt.m.b8[21];
	ctxt->m.b8[23] = tctxt.m.b8[20];
	ctxt->m.b8[24] = tctxt.m.b8[27];
	ctxt->m.b8[25] = tctxt.m.b8[26];
	ctxt->m.b8[26] = tctxt.m.b8[25];
	ctxt->m.b8[27] = tctxt.m.b8[24];
	ctxt->m.b8[28] = tctxt.m.b8[31];
	ctxt->m.b8[29] = tctxt.m.b8[30];
	ctxt->m.b8[30] = tctxt.m.b8[29];
	ctxt->m.b8[31] = tctxt.m.b8[28];
	ctxt->m.b8[32] = tctxt.m.b8[35];
	ctxt->m.b8[33] = tctxt.m.b8[34];
	ctxt->m.b8[34] = tctxt.m.b8[33];
	ctxt->m.b8[35] = tctxt.m.b8[32];
	ctxt->m.b8[36] = tctxt.m.b8[39];
	ctxt->m.b8[37] = tctxt.m.b8[38];
	ctxt->m.b8[38] = tctxt.m.b8[37];
	ctxt->m.b8[39] = tctxt.m.b8[36];
	ctxt->m.b8[40] = tctxt.m.b8[43];
	ctxt->m.b8[41] = tctxt.m.b8[42];
	ctxt->m.b8[42] = tctxt.m.b8[41];
	ctxt->m.b8[43] = tctxt.m.b8[40];
	ctxt->m.b8[44] = tctxt.m.b8[47];
	ctxt->m.b8[45] = tctxt.m.b8[46];
	ctxt->m.b8[46] = tctxt.m.b8[45];
	ctxt->m.b8[47] = tctxt.m.b8[44];
	ctxt->m.b8[48] = tctxt.m.b8[51];
	ctxt->m.b8[49] = tctxt.m.b8[50];
	ctxt->m.b8[50] = tctxt.m.b8[49];
	ctxt->m.b8[51] = tctxt.m.b8[48];
	ctxt->m.b8[52] = tctxt.m.b8[55];
	ctxt->m.b8[53] = tctxt.m.b8[54];
	ctxt->m.b8[54] = tctxt.m.b8[53];
	ctxt->m.b8[55] = tctxt.m.b8[52];
	ctxt->m.b8[56] = tctxt.m.b8[59];
	ctxt->m.b8[57] = tctxt.m.b8[58];
	ctxt->m.b8[58] = tctxt.m.b8[57];
	ctxt->m.b8[59] = tctxt.m.b8[56];
	ctxt->m.b8[60] = tctxt.m.b8[63];
	ctxt->m.b8[61] = tctxt.m.b8[62];
	ctxt->m.b8[62] = tctxt.m.b8[61];
	ctxt->m.b8[63] = tctxt.m.b8[60];
#endif

	a = H(0);
	b = H(1);
	c = H(2);
	d = H(3);
	e = H(4);

	for (t = 0; t < 20; t++)
	{
		s = t & 0x0f;
		if (t >= 16)
			W(s) = S(1, W((s + 13) & 0x0f) ^ W((s + 8) & 0x0f) ^ W((s + 2) & 0x0f) ^ W(s));
		tmp = S(5, a) + F0(b, c, d) + e + W(s) + K(t);
		e = d;
		d = c;
		c = S(30, b);
		b = a;
		a = tmp;
	}
	for (t = 20; t < 40; t++)
	{
		s = t & 0x0f;
		W(s) = S(1, W((s + 13) & 0x0f) ^ W((s + 8) & 0x0f) ^ W((s + 2) & 0x0f) ^ W(s));
		tmp = S(5, a) + F1(b, c, d) + e + W(s) + K(t);
		e = d;
		d = c;
		c = S(30, b);
		b = a;
		a = tmp;
	}
	for (t = 40; t < 60; t++)
	{
		s = t & 0x0f;
		W(s) = S(1, W((s + 13) & 0x0f) ^ W((s + 8) & 0x0f) ^ W((s + 2) & 0x0f) ^ W(s));
		tmp = S(5, a) + F2(b, c, d) + e + W(s) + K(t);
		e = d;
		d = c;
		c = S(30, b);
		b = a;
		a = tmp;
	}
	for (t = 60; t < 80; t++)
	{
		s = t & 0x0f;
		W(s) = S(1, W((s + 13) & 0x0f) ^ W((s + 8) & 0x0f) ^ W((s + 2) & 0x0f) ^ W(s));
		tmp = S(5, a) + F3(b, c, d) + e + W(s) + K(t);
		e = d;
		d = c;
		c = S(30, b);
		b = a;
		a = tmp;
	}

	H(0) = H(0) + a;
	H(1) = H(1) + b;
	H(2) = H(2) + c;
	H(3) = H(3) + d;
	H(4) = H(4) + e;

	memset(&ctxt->m.b8[0], 0, 64);
}
Example #19
0
static void simple_test_nfsft(void)
{
  const int N = 4; /* bandwidth/maximum degree */
  const int M = 8; /* number of nodes */
  nfsft_plan plan; /* transform plan */
  int j, k, n; /* loop variables */

  /* precomputation (for fast polynomial transform) */
  nfsft_precompute(N,1000.0,0U,0U);

  /* Initialize transform plan using the guru interface. All input and output
   * arrays are allocated by nfsft_init_guru(). Computations are performed with
   * respect to L^2-normalized spherical harmonics Y_k^n. The array of spherical
   * Fourier coefficients is preserved during transformations. The NFFT uses a
   * cut-off parameter m = 6. See the NFFT 3 manual for details.
   */
  nfsft_init_guru(&plan, N, M, NFSFT_MALLOC_X | NFSFT_MALLOC_F |
    NFSFT_MALLOC_F_HAT | NFSFT_NORMALIZED | NFSFT_PRESERVE_F_HAT,
    PRE_PHI_HUT | PRE_PSI | FFTW_INIT | FFT_OUT_OF_PLACE, 6);

  /* pseudo-random nodes */
  for (j = 0; j < plan.M_total; j++)
  {
    plan.x[2*j]= nfft_drand48() - K(0.5);
    plan.x[2*j+1]= K(0.5) * nfft_drand48();
  }

  /* precomputation (for NFFT, node-dependent) */
  nfsft_precompute_x(&plan);

  /* pseudo-random Fourier coefficients */
  for (k = 0; k <= plan.N; k++)
    for (n = -k; n <= k; n++)
      plan.f_hat[NFSFT_INDEX(k,n,&plan)] =
          nfft_drand48() - K(0.5) + _Complex_I*(nfft_drand48() - K(0.5));

  /* Direct transformation, display result. */
  nfsft_trafo_direct(&plan);
  printf("Vector f (NDSFT):\n");
  for (j = 0; j < plan.M_total; j++)
    printf("f[%+2d] = %+5.3" __FES__ " %+5.3" __FES__ "*I\n",j,
      creal(plan.f[j]), cimag(plan.f[j]));

  printf("\n");

  /* Fast approximate transformation, display result. */
  nfsft_trafo(&plan);
  printf("Vector f (NFSFT):\n");
  for (j = 0; j < plan.M_total; j++)
    printf("f[%+2d] = %+5.3" __FES__ " %+5.3" __FES__ "*I\n",j,
      creal(plan.f[j]), cimag(plan.f[j]));

  printf("\n");

  /* Direct adjoint transformation, display result. */
  nfsft_adjoint_direct(&plan);
  printf("Vector f_hat (NDSFT):\n");
  for (k = 0; k <= plan.N; k++)
    for (n = -k; n <= k; n++)
      fprintf(stdout,"f_hat[%+2d,%+2d] = %+5.3" __FES__ " %+5.3" __FES__ "*I\n",k,n,
        creal(plan.f_hat[NFSFT_INDEX(k,n,&plan)]),
        cimag(plan.f_hat[NFSFT_INDEX(k,n,&plan)]));

  printf("\n");

  /* Fast approximate adjoint transformation, display result. */
  nfsft_adjoint(&plan);
  printf("Vector f_hat (NFSFT):\n");
  for (k = 0; k <= plan.N; k++)
  {
    for (n = -k; n <= k; n++)
    {
      fprintf(stdout,"f_hat[%+2d,%+2d] = %+5.3" __FES__ " %+5.3" __FES__ "*I\n",k,n,
        creal(plan.f_hat[NFSFT_INDEX(k,n,&plan)]),
        cimag(plan.f_hat[NFSFT_INDEX(k,n,&plan)]));
    }
  }

  /* Finalize the plan. */
  nfsft_finalize(&plan);

  /* Destroy data precomputed for fast polynomial transform. */
	nfsft_forget();
}
Example #20
0
/**
  * The optimal community structure is a subdivision of the network into
  * nonoverlapping groups of nodes in a way that maximizes the number of
  * within-group edges, and minimizes the number of between-group edges.
  * The modularity is a statistic that quantifies the degree to which the
  * network may be subdivided into such clearly delineated groups.
  *
  * The Louvain algorithm is a fast and accurate community detection
  * algorithm (as of writing). The algorithm may also be used to detect
  * hierarchical community structure.
  *
  *     Input:      W       undirected (weighted or binary) connection matrix.
  *                 gamma,  modularity resolution parameter (optional)
  *                             gamma>1     detects smaller modules
  *                             0<=gamma<1  detects larger modules
  *                             gamma=1     (default) classic modularity
  *
  *     Outputs:    Ci,     community structure
  *                 Q,      modularity

  * Note: Ci and Q may vary from run to run, due to heuristics in the
  * algorithm. Consequently, it may be worth to compare multiple runs.
  *
  * Reference: Blondel et al. (2008)  J. Stat. Mech. P10008.
  *           Reichardt and Bornholdt (2006) Phys Rev E 74:016110.
  */
urowvec Connectome::modularity_louvain(mat W, double *Qopt, double gamma)
{
    uint N = W.n_rows, h = 1, n = N, u =0, ma =0, mb =0;
    double s = accu(W), wm = 0, max_dQ = -1;
    uvec M, t;
    rowvec dQ;
    field<urowvec> Ci(20);
    Ci(0) = urowvec(); Ci(1) = linspace<urowvec>(0,n-1,n);
    rowvec Q = "-1,0";

    while (Q(h)-Q(h-1) > 1e-10) {
        rowvec K = sum(W,0), Km = K;
        mat Knm = W;

        M = linspace<uvec>(0,n-1,n);

        bool flag = true;

        while (flag) {
            flag = false;

            arma_rng::set_seed_random();
            t = shuffle(linspace<uvec>(0,n-1,n));
            for (uint i =0;i<n;++i) {
                u = t(i);
                ma = M(u);
                dQ = Knm.row(u) - Knm(u,ma)+W(u,u)-
                        gamma*K(u)*(Km-Km(ma)+K(u))/s;
                dQ(ma) = 0;
                max_dQ = dQ.max();
                mb = as_scalar(find(dQ == max_dQ,1));
                if (max_dQ > 1e-10) {
                    flag = true;
                    M(u) = mb;

                    Knm.col(mb) += W.col(u);
                    Knm.col(ma) -= W.col(u);
                    Km(mb) += K(u);
                    Km(ma) -= K(u);
                }
            }
        }
        Ci(++h) = zeros<urowvec>(1,N);
        M = matlabUnique(M);
        for (uint u=0;u<n;++u) {
            Ci(h)(find(Ci(h-1) == u)).fill(M(u));
        }
        n = M.max()+1;
        mat w = zeros(n,n);
        for (uint u =0;u<n;++u)
            for (uint v=u;v<n;++v) {
                wm = accu(W(find(M==u),find(M==v)));
                w(u,v) = wm;
                w(v,u) = wm;
            }
        W = w;
        Q.resize(h+1);
        Q(h) = trace(W)/s - gamma*accu((W*W)/(s*s));
    }
    *Qopt = Q(h);
    return Ci(h);
}
Example #21
0
void ThickPlateMesh::solve(void)
{

    int sys_dim = TP_NDOF*nNodes;

    Matrix K(sys_dim , sys_dim );


#pragma omp parallel for num_threads(FEM_NUM_THREADS)
    for(int i=0; i<nElements; i++)
        elements[i]->getStiffnessMatrix(K, BftDBf, BctBc, L);


#pragma omp parallel for num_threads(FEM_NUM_THREADS)
    for(int i=0; i<nNodes; i++)
    {
        if(nodes[i]->lockStatus[2])
            K.setUnit(TP_NDOF*nodes[i]->index + 0);
        if(nodes[i]->lockStatus[3])
            K.setUnit(TP_NDOF*nodes[i]->index + 1);
        if(nodes[i]->lockStatus[4])
            K.setUnit(TP_NDOF*nodes[i]->index + 2);
    }


    Matrix f(sys_dim);


#pragma omp parallel for num_threads(FEM_NUM_THREADS)
    for(int i=0; i<nNodes; i++)
    {
        f(TP_NDOF*nodes[i]->index + 0) = nodes[i]->loadValues[2];
        f(TP_NDOF*nodes[i]->index + 1) = nodes[i]->loadValues[3];
        f(TP_NDOF*nodes[i]->index + 2) = nodes[i]->loadValues[4];
    }

    Matrix x(sys_dim);


    K.solve(f, x);





//    Polynomial2D Bf[3][npt];

//    Polynomial2D **Bc= new Polynomial2D*[2];
//    for(int i=0; i<2; i++)
//        Bc[i] = new Polynomial2D[npt];

//    for(int i=0; i<npx*npy; i++)
//    {
//        Bf[0][3*i+2] = -1.0*L->D1[i];
//        Bf[1][3*i+1] = L->D2[i];
//        Bf[2][3*i+1] = L->D1[i];
//        Bf[2][3*i+2] = -1.0*L->D2[i];

//        Bc[0][3*i] = GKt * L->D1[i];
//        Bc[0][3*i+2] = GKt * L->N[i];
//        Bc[1][3*i] = GKt * L->D2[i];
//        Bc[1][3*i+1] = -GKt * L->N[i];
//    }


//    Polynomial2D **DBf= new Polynomial2D*[3];
//    for(int i=0; i<npt; i++)
//        DBf[i] = new Polynomial2D[npt];


//    for(int i=0; i<3; i++)
//        for(int j=0; j<npt; j++)
//            DBf[i][j] = Bf[0][j]*D(i,0) + Bf[1][j]*D(i,1) + Bf[2][j]*D(i,2);

//    Matrix M(sys_dim);
//    Matrix Q(2*nNodes);

//#pragma omp parallel for num_threads(FEM_NUM_THREADS)
//    for(int i=0; i<nElements; i++)
//        elements[i]->evalResults(M, Q, x, DBf, Bc);


    results = new double*[2*TP_NDOF+2];
    for(int i=0; i<2*TP_NDOF+2; i++)
        results[i] = new double[nNodes];

#pragma omp parallel for num_threads(FEM_NUM_THREADS)
    for(int i=0; i<nNodes; i++)
    {
        results[0][i] = x(TP_NDOF*i + 0);
        results[1][i] = x(TP_NDOF*i + 1);
        results[2][i] = x(TP_NDOF*i + 2);
//        results[3][i] = M(TP_NDOF*i + 0);
//        results[4][i] = M(TP_NDOF*i + 1);
//        results[5][i] = M(TP_NDOF*i + 2);
//        results[6][i] = Q(2*i + 0);
//        results[7][i] = Q(2*i + 1);
    }

}
Example #22
0
void C(_*a, _**b, _**c, _**d) {
 K(b, **a);
}
void Foam::solidWallMixedTemperatureCoupledFvPatchScalarField::updateCoeffs()
{
    if (updated())
    {
        return;
    }

    // Get the coupling information from the directMappedPatchBase
    const directMappedPatchBase& mpp = refCast<const directMappedPatchBase>
    (
        patch().patch()
    );
    const polyMesh& nbrMesh = mpp.sampleMesh();
    const fvPatch& nbrPatch = refCast<const fvMesh>
    (
        nbrMesh
    ).boundary()[mpp.samplePolyPatch().index()];

    // Force recalculation of mapping and schedule
    const mapDistribute& distMap = mpp.map();

    tmp<scalarField> intFld = patchInternalField();


    const solidWallMixedTemperatureCoupledFvPatchScalarField& nbrField =
    refCast<const solidWallMixedTemperatureCoupledFvPatchScalarField>
    (
        nbrPatch.lookupPatchField<volScalarField, scalar>
        (
            neighbourFieldName_
        )
    );

    // Swap to obtain full local values of neighbour internal field
    scalarField nbrIntFld = nbrField.patchInternalField();
    mapDistribute::distribute
    (
        Pstream::defaultCommsType,
        distMap.schedule(),
        distMap.constructSize(),
        distMap.subMap(),           // what to send
        distMap.constructMap(),     // what to receive
        nbrIntFld
    );

    // Swap to obtain full local values of neighbour K*delta
    scalarField nbrKDelta = nbrField.K()*nbrPatch.deltaCoeffs();
    mapDistribute::distribute
    (
        Pstream::defaultCommsType,
        distMap.schedule(),
        distMap.constructSize(),
        distMap.subMap(),           // what to send
        distMap.constructMap(),     // what to receive
        nbrKDelta
    );

    tmp<scalarField> myKDelta = K()*patch().deltaCoeffs();


    // Both sides agree on
    // - temperature : (myKDelta*fld + nbrKDelta*nbrFld)/(myKDelta+nbrKDelta)
    // - gradient    : (temperature-fld)*delta
    // We've got a degree of freedom in how to implement this in a mixed bc.
    // (what gradient, what fixedValue and mixing coefficient)
    // Two reasonable choices:
    // 1. specify above temperature on one side (preferentially the high side)
    //    and above gradient on the other. So this will switch between pure
    //    fixedvalue and pure fixedgradient
    // 2. specify gradient and temperature such that the equations are the
    //    same on both sides. This leads to the choice of
    //    - refGradient = zero gradient
    //    - refValue = neighbour value
    //    - mixFraction = nbrKDelta / (nbrKDelta + myKDelta())


    this->refValue() = nbrIntFld;

    this->refGrad() = 0.0;

    this->valueFraction() = nbrKDelta / (nbrKDelta + myKDelta());

    mixedFvPatchScalarField::updateCoeffs();


    if (debug)
    {
        scalar Q = gSum(K()*patch().magSf()*snGrad());

        Info<< patch().boundaryMesh().mesh().name() << ':'
            << patch().name() << ':'
            << this->dimensionedInternalField().name() << " <- "
            << nbrMesh.name() << ':'
            << nbrPatch.name() << ':'
            << this->dimensionedInternalField().name() << " :"
            << " heat[W]:" << Q
            << " walltemperature "
            << " min:" << gMin(*this)
            << " max:" << gMax(*this)
            << " avg:" << gAverage(*this)
            << endl;
    }
}
Example #24
0
File: lct.c Project: jbailhache/log
main ()
{
term x, n;
type t;
term plus_omega, omega_2, plus_omega_2, plus_omega_n, omega_n, omega_omega,
	plus_omega_omega;
term f, p;

	param_out.fd = stdout;
	param_err.fd = stderr;
	init ();
	/* Exemple : construction de l'ordinal omega * 2 */
	x = ap (LIM, ap (ap (S(ORD,ORD,ORD),
		ap (ap (S(ORD,fnc(ORD,ORD),fnc(ORD,ORD)),rep(ORD)),
			ap(K(fnc(ORD,ORD),ORD),SUC))),
		ap(K(ORD,ORD),ap(LIM,I(ORD)))));
	sput ("x = ", out);
	write_term (x, out);
	t = type_term (x);
	sput ("\nt = ", out);
	write_type (t, out);
	sput ("\n", out);

	n = var ("n", ORD);
	/*
	x = ap (LIM, lambda (n,
		ap (ap (ap (rep(ORD), n), SUC), ap (LIM, I(ORD)))
			));
		*/
	x = ap (ap (ap (rep(ORD), n), SUC), ap (LIM, I(ORD)));
	/*   x = ap (rep(ORD), n); */

	sput ("x = ", out);
	write_term (x, out);
	t = type_term (x);
	sput ("\nt = ", out);
	write_type (t, out);
	sput ("\n", out);

	x = lambda (n, x);
	sput ("x = ", out);
	write_term (x, out);
	t = type_term (x);
	sput ("\nt = ", out);
	write_type (t, out);
	sput ("\n", out);

	x = ap (LIM, x);
	sput ("x = ", out);
	write_term (x, out);
	t = type_term (x);
	sput ("\nt = ", out);
	write_type (t, out);
	sput ("\n", out);

	x = var ("x", ORD);
	plus_omega = lambda (x, lim (lambda (n,
		rpt (ORD, n, SUC, x)
			)));
	omega_2 = lim (lambda (n, rpt (ORD, n, plus_omega, ZERO)));
	t = type_term (omega_2);
	sput ("Type of omega_2 = ", out);
	write_type (t, out);
	sput ("\n", out);

	plus_omega_2 = lambda (x, lim (lambda (n,
		rpt (ORD, n, plus_omega, x))));
	t = type_term (plus_omega_2);
	sput ("Type of plus_omega_2 is ", out);
	write_type (t, out);

	f = var ("f", fnc(ORD,ORD));
	p = var ("p", ORD);

	plus_omega_n = lambda (n, rpt (fnc(ORD,ORD), n, lambda (f,
		lambda (x, lim (lambda (p, rpt (ORD, p, f, x)))) ),
		SUC));
	/*
	next_power = lambda (f,
		lambda (x, lim (lambda (p, rpt (ORD, p, f, x)))));
	plus_omega_n = lambda (n, rpt (fnc(ORD,ORD), n,
	*/
	t = type_term (plus_omega_n);
	sput ("\nType of plus_omega_n is ", out);
	write_type (t, out);

	omega_n = lambda (n, ap (ap (plus_omega_n, n), ZERO));
	t = type_term (omega_n);
	sput ("\nType of omega_n is ", out);
	write_type (t, out);

	omega_omega = lim (omega_n);
	t = type_term (omega_omega);
	sput ("\nType of omega_omega is ", out);
	write_type (t, out);

	plus_omega_omega = lambda (x, lim (lambda (n,
					    ap (ap (plus_omega_n, n), x) )));
	t = type_term (plus_omega_omega);
	sput ("\nType of plus_omega_omega is ", out);
	write_type (t, out);

	sput ("\n", out);

}
Example #25
0
int test_vec4_ctor()
{
	int Error = 0;

	{
		glm::ivec4 A(1, 2, 3, 4);
		glm::ivec4 B(A);
		Error += glm::all(glm::equal(A, B)) ? 0 : 1;
	}

#	if GLM_HAS_TRIVIAL_QUERIES
	//	Error += std::is_trivially_default_constructible<glm::vec4>::value ? 0 : 1;
	//	Error += std::is_trivially_copy_assignable<glm::vec4>::value ? 0 : 1;
		Error += std::is_trivially_copyable<glm::vec4>::value ? 0 : 1;
		Error += std::is_trivially_copyable<glm::dvec4>::value ? 0 : 1;
		Error += std::is_trivially_copyable<glm::ivec4>::value ? 0 : 1;
		Error += std::is_trivially_copyable<glm::uvec4>::value ? 0 : 1;

		Error += std::is_copy_constructible<glm::vec4>::value ? 0 : 1;
#	endif

#if GLM_HAS_INITIALIZER_LISTS
	{
		glm::vec4 a{ 0, 1, 2, 3 };
		std::vector<glm::vec4> v = {
			{0, 1, 2, 3},
			{4, 5, 6, 7},
			{8, 9, 0, 1}};
	}

	{
		glm::dvec4 a{ 0, 1, 2, 3 };
		std::vector<glm::dvec4> v = {
			{0, 1, 2, 3},
			{4, 5, 6, 7},
			{8, 9, 0, 1}};
	}
#endif

#if GLM_HAS_UNRESTRICTED_UNIONS && defined(GLM_SWIZZLE)
	{
		glm::vec4 A = glm::vec4(1.0f, 2.0f, 3.0f, 4.0f);
		glm::vec4 B = A.xyzw;
		glm::vec4 C(A.xyzw);
		glm::vec4 D(A.xyzw());
		glm::vec4 E(A.x, A.yzw);
		glm::vec4 F(A.x, A.yzw());
		glm::vec4 G(A.xyz, A.w);
		glm::vec4 H(A.xyz(), A.w);
		glm::vec4 I(A.xy, A.zw);
		glm::vec4 J(A.xy(), A.zw());
		glm::vec4 K(A.x, A.y, A.zw);
		glm::vec4 L(A.x, A.yz, A.w);
		glm::vec4 M(A.xy, A.z, A.w);

		Error += glm::all(glm::equal(A, B)) ? 0 : 1;
		Error += glm::all(glm::equal(A, C)) ? 0 : 1;
		Error += glm::all(glm::equal(A, D)) ? 0 : 1;
		Error += glm::all(glm::equal(A, E)) ? 0 : 1;
		Error += glm::all(glm::equal(A, F)) ? 0 : 1;
		Error += glm::all(glm::equal(A, G)) ? 0 : 1;
		Error += glm::all(glm::equal(A, H)) ? 0 : 1;
		Error += glm::all(glm::equal(A, I)) ? 0 : 1;
		Error += glm::all(glm::equal(A, J)) ? 0 : 1;
		Error += glm::all(glm::equal(A, K)) ? 0 : 1;
		Error += glm::all(glm::equal(A, L)) ? 0 : 1;
		Error += glm::all(glm::equal(A, M)) ? 0 : 1;
	}
#endif// GLM_HAS_UNRESTRICTED_UNIONS && defined(GLM_SWIZZLE)

	{
		glm::vec4 A(1);
		glm::vec4 B(1, 1, 1, 1);
		
		Error += A == B ? 0 : 1;
	}
	
	{
		std::vector<glm::vec4> Tests;
		Tests.push_back(glm::vec4(glm::vec2(1, 2), 3, 4));
		Tests.push_back(glm::vec4(1, glm::vec2(2, 3), 4));
		Tests.push_back(glm::vec4(1, 2, glm::vec2(3, 4)));
		Tests.push_back(glm::vec4(glm::vec3(1, 2, 3), 4));
		Tests.push_back(glm::vec4(1, glm::vec3(2, 3, 4)));
		Tests.push_back(glm::vec4(glm::vec2(1, 2), glm::vec2(3, 4)));
		Tests.push_back(glm::vec4(1, 2, 3, 4));
		Tests.push_back(glm::vec4(glm::vec4(1, 2, 3, 4)));
		
		for(std::size_t i = 0; i < Tests.size(); ++i)
			Error += Tests[i] == glm::vec4(1, 2, 3, 4) ? 0 : 1;
	}
	
	return Error;
}
Example #26
0
static void s_video_helper_kbd_keymap_init (void)
{
        int i;
        int map;
	struct kbentry entry = {0, 0, 0};

	for (map = 0; map < NUM_VGAKEYMAPS; ++map) {
		memset(s_video_helper_keybd_keymap[map], 0, NR_KEYS * sizeof(unsigned short));
		for (i = 0; i < NR_KEYS; ++i) {
			entry.kb_table = map;
			entry.kb_index = i;
			if (ioctl(s_video_helper_keybd.fd, KDGKBENT, &entry) == 0) {
				if (entry.kb_value == K_ENTER) {
					entry.kb_value = K(KT_ASCII,13);
				}
				if (KTYP(entry.kb_value) == KT_PAD) {
					switch (entry.kb_value) {
						case K_P0:
						case K_P1:
						case K_P2:
						case K_P3:
						case K_P4:
						case K_P5:
						case K_P6:
						case K_P7:
						case K_P8:
						case K_P9:
							s_video_helper_keybd_keymap[map][i] = entry.kb_value;
							s_video_helper_keybd_keymap[map][i] += '0';
							break;
						case K_PPLUS:
							s_video_helper_keybd_keymap[map][i] = K(KT_ASCII, '+');
							break;
						case K_PMINUS:
							s_video_helper_keybd_keymap[map][i] = K(KT_ASCII, '-');
							break;
						case K_PSTAR:
							s_video_helper_keybd_keymap[map][i] = K(KT_ASCII, '*');
							break;
						case K_PSLASH:
							s_video_helper_keybd_keymap[map][i] = K(KT_ASCII, '/');
							break;
						case K_PENTER:
							s_video_helper_keybd_keymap[map][i] = K(KT_ASCII, '\r');
							break;
						case K_PCOMMA:
							s_video_helper_keybd_keymap[map][i] = K(KT_ASCII, ',');
							break;
						case K_PDOT:
							s_video_helper_keybd_keymap[map][i] = K(KT_ASCII, '.');
							break;
						default:
							break;
					}
				}
				if ((KTYP(entry.kb_value) == KT_LATIN) ||
				    (KTYP(entry.kb_value) == KT_ASCII) ||
				    (KTYP(entry.kb_value) == KT_LETTER) ) {
					s_video_helper_keybd_keymap[map][i] = entry.kb_value;
				}
			}
		}
	}
}
Example #27
0
inline
void cal_campose(Eigen::MatrixXf XXc,Eigen::MatrixXf XXw,
                int n,Eigen::MatrixXf &R2,Eigen::VectorXf &t2)
{
    //A
    Eigen::MatrixXf X = XXw;
    //B
    Eigen::MatrixXf Y = XXc;
    Eigen::MatrixXf eyen(n,n);
    eyen = Eigen::MatrixXf::Identity(n,n);
    Eigen::MatrixXf ones(n,n);
    ones.setOnes();
    Eigen::MatrixXf K(n,n);
    K = eyen - ones/n;


    vfloat3 ux;
    for(int i =0; i < n; i++)
    {
        ux = ux + X.col(i);
    }
    ux = ux/n;
    vfloat3 uy;
    for(int i =0; i < n; i++)
    {
        uy = uy + Y.col(i);
    }
    uy = uy/n;
    Eigen::MatrixXf XK(3,n);
    XK = X*K;
    Eigen::MatrixXf XKarre(3,n);
    for(int i = 0 ; i < n ; i++)
    {
        XKarre(0,i) = XK(0,i)*XK(0,i);
        XKarre(1,i) = XK(1,i)*XK(1,i);
        XKarre(2,i) = XK(2,i)*XK(2,i);
    }
    Eigen::VectorXf sumXKarre(n);
    float sigmx2 = 0;
    for(int i = 0 ; i < n ; i++)
    {
        sumXKarre[i] = XKarre(0,i) + XKarre(1,i) + XKarre(2,i);
        sigmx2 += sumXKarre[i];
    }
    sigmx2 /=n;
    Eigen::MatrixXf SXY(3,3);
    SXY = Y*K*(X.transpose())/n;
    JacobiSVD<MatrixXf> svd(SXY, ComputeThinU | ComputeThinV);
    Eigen::MatrixXf S(3,3);
    S = Eigen::MatrixXf::Identity(3,3);

    if(SXY.determinant() < 0)
    {
        S(3,3) = -1;
    }

    R2 = svd.matrixU() * S * (svd.matrixV()).transpose();

    Eigen::MatrixXf D(3,3);
    D.setZero();

    for(int i = 0 ; i < svd.singularValues().size() ; i++)
    {
        D(i,i) = (svd.singularValues())[i];
    }

    float c2 = (D*S).trace()/sigmx2;
    t2 = uy - c2*R2*ux;

    vfloat3 Xx = R2.col(0);
    vfloat3 Yy = R2.col(1);
    vfloat3 Zz = R2.col(2);

    if((x_cross(Xx,Yy)-Zz).norm()>2e-2)
    {
        R2.col(2) = -Zz;
    }
}
Example #28
0
File: bspline.c Project: NFFT/nfft
/* Evaluate the cardinal B-Spline B_{n-1} supported on [0,n]. */
R Y(bsplines)(const INT k, const R _x)
{
  const R kk = (R)k;
  R result_value;
  INT r;
  INT g1, g2; /* boundaries */
  INT j, idx, ug, og; /* indices */
  R a; /* Alpha of de Boor scheme*/
  R x = _x;
  R scratch[k];

  result_value = K(0.0);

  if (K(0.0) < x && x < kk)
  {
    /* Exploit symmetry around k/2, maybe. */
    if ( (kk - x) < x)
    {
      x = kk - x;
    }

    r = (INT)LRINT(CEIL(x) - K(1.0));

    /* Do not use the explicit formula x^k / k! for first interval! De Boor's
     * algorithm is more accurate. See https://github.com/NFFT/nfft/issues/16.
     */

    for (idx = 0; idx < k; idx++)
      scratch[idx] = K(0.0);

    scratch[k-r-1] = K(1.0);

    /* Bounds of the algorithm. */
    g1 = r;
    g2 = k - 1 - r;
    ug = g2;

    /* g1 <= g2 */

    for (j = 1, og = g2 + 1; j <= g1; j++, og++)
    {
      a = (x + (R)(k - r - og - 1)) / ((R)(k - j));
      scratch[og] = (K(1.0) - a) * scratch[og-1];
      bspline_help(k, x, scratch, j, ug + 1, og - 1, r);
      a = (x + (R)(k - r - ug - 1)) / ((R)(k - j));
      scratch[ug] = a * scratch[ug];
    }

    for (og-- ; j <= g2; j++)
    {
      bspline_help(k, x, scratch, j, ug + 1, og, r);
      a = (x + (R)(k - r - ug - 1)) / ((R)(k - j));
      scratch[ug] = a * scratch[ug];
    }

    for(; j < k; j++)
    {
      ug++;
      bspline_help(k, x, scratch, j, ug, og, r);
    }

    result_value = scratch[k-1];
  }

  return(result_value);
}
Example #29
0
static ssize_t node_read_meminfo(struct device *dev,
			struct device_attribute *attr, char *buf)
{
	int n;
	int nid = dev->id;
	struct sysinfo i;

	si_meminfo_node(&i, nid);
	n = sprintf(buf,
		       "Node %d MemTotal:       %8lu kB\n"
		       "Node %d MemFree:        %8lu kB\n"
		       "Node %d MemUsed:        %8lu kB\n"
		       "Node %d Active:         %8lu kB\n"
		       "Node %d Inactive:       %8lu kB\n"
		       "Node %d Active(anon):   %8lu kB\n"
		       "Node %d Inactive(anon): %8lu kB\n"
		       "Node %d Active(file):   %8lu kB\n"
		       "Node %d Inactive(file): %8lu kB\n"
		       "Node %d Unevictable:    %8lu kB\n"
		       "Node %d Mlocked:        %8lu kB\n",
		       nid, K(i.totalram),
		       nid, K(i.freeram),
		       nid, K(i.totalram - i.freeram),
		       nid, K(node_page_state(nid, NR_ACTIVE_ANON) +
				node_page_state(nid, NR_ACTIVE_FILE)),
		       nid, K(node_page_state(nid, NR_INACTIVE_ANON) +
				node_page_state(nid, NR_INACTIVE_FILE)),
		       nid, K(node_page_state(nid, NR_ACTIVE_ANON)),
		       nid, K(node_page_state(nid, NR_INACTIVE_ANON)),
		       nid, K(node_page_state(nid, NR_ACTIVE_FILE)),
		       nid, K(node_page_state(nid, NR_INACTIVE_FILE)),
		       nid, K(node_page_state(nid, NR_UNEVICTABLE)),
		       nid, K(node_page_state(nid, NR_MLOCK)));

#ifdef CONFIG_HIGHMEM
	n += sprintf(buf + n,
		       "Node %d HighTotal:      %8lu kB\n"
		       "Node %d HighFree:       %8lu kB\n"
		       "Node %d LowTotal:       %8lu kB\n"
		       "Node %d LowFree:        %8lu kB\n",
		       nid, K(i.totalhigh),
		       nid, K(i.freehigh),
		       nid, K(i.totalram - i.totalhigh),
		       nid, K(i.freeram - i.freehigh));
#endif
	n += sprintf(buf + n,
		       "Node %d Dirty:          %8lu kB\n"
		       "Node %d Writeback:      %8lu kB\n"
		       "Node %d FilePages:      %8lu kB\n"
		       "Node %d Mapped:         %8lu kB\n"
		       "Node %d AnonPages:      %8lu kB\n"
		       "Node %d Shmem:          %8lu kB\n"
		       "Node %d KernelStack:    %8lu kB\n"
		       "Node %d PageTables:     %8lu kB\n"
		       "Node %d NFS_Unstable:   %8lu kB\n"
		       "Node %d Bounce:         %8lu kB\n"
		       "Node %d WritebackTmp:   %8lu kB\n"
		       "Node %d Slab:           %8lu kB\n"
		       "Node %d SReclaimable:   %8lu kB\n"
		       "Node %d SUnreclaim:     %8lu kB\n"
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
		       "Node %d AnonHugePages:  %8lu kB\n"
#endif
			,
		       nid, K(node_page_state(nid, NR_FILE_DIRTY)),
		       nid, K(node_page_state(nid, NR_WRITEBACK)),
		       nid, K(node_page_state(nid, NR_FILE_PAGES)),
		       nid, K(node_page_state(nid, NR_FILE_MAPPED)),
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
		       nid, K(node_page_state(nid, NR_ANON_PAGES)
			+ node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
			HPAGE_PMD_NR),
#else
		       nid, K(node_page_state(nid, NR_ANON_PAGES)),
#endif
		       nid, K(node_page_state(nid, NR_SHMEM)),
		       nid, node_page_state(nid, NR_KERNEL_STACK) *
				THREAD_SIZE / 1024,
		       nid, K(node_page_state(nid, NR_PAGETABLE)),
		       nid, K(node_page_state(nid, NR_UNSTABLE_NFS)),
		       nid, K(node_page_state(nid, NR_BOUNCE)),
		       nid, K(node_page_state(nid, NR_WRITEBACK_TEMP)),
		       nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE) +
				node_page_state(nid, NR_SLAB_UNRECLAIMABLE)),
		       nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE)),
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
			, nid,
			K(node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
			HPAGE_PMD_NR));
#else
		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)));
#endif
	n += hugetlb_report_node_meminfo(nid, buf + n);
	return n;
}
Example #30
0
Foam::tmp<Foam::surfaceScalarField> Foam::dragModels::segregated::Kf() const
{
    return fvc::interpolate(K());
}