VOID
NTAPI
KiAdjustQuantumThread(IN PKTHREAD Thread)
{
PKPRCB Prcb = KeGetCurrentPrcb();
PKTHREAD NextThread;
/* Acquire thread and PRCB lock */
KiAcquireThreadLock(Thread);
KiAcquirePrcbLock(Prcb);
/* Don't adjust for RT threads */
if ((Thread->Priority < LOW_REALTIME_PRIORITY) &&
(Thread->BasePriority < (LOW_REALTIME_PRIORITY - 2)))
{
/* Decrease Quantum by one and see if we've ran out */
if (--Thread->Quantum <= 0)
{
/* Return quantum */
Thread->Quantum = Thread->QuantumReset;
/* Calculate new Priority */
Thread->Priority = KiComputeNewPriority(Thread, 1);
/* Check if there's no next thread scheduled */
if (!Prcb->NextThread)
{
/* Select a ready thread and check if we found one */
NextThread = KiSelectReadyThread(Thread->Priority, Prcb);
if (NextThread)
{
/* Set it on standby and switch to it */
NextThread->State = Standby;
Prcb->NextThread = NextThread;
}
}
else
{
/* This thread can be preempted again */
Thread->Preempted = FALSE;
}
}
}
/* Release locks */
KiReleasePrcbLock(Prcb);
KiReleaseThreadLock(Thread);
KiExitDispatcher(Thread->WaitIrql);
}
VOID
NTAPI
KiQuantumEnd(VOID)
{
PKPRCB Prcb = KeGetCurrentPrcb();
PKTHREAD NextThread, Thread = Prcb->CurrentThread;
/* Check if a DPC Event was requested to be signaled */
if (InterlockedExchange(&Prcb->DpcSetEventRequest, 0))
{
/* Signal it */
KeSetEvent(&Prcb->DpcEvent, 0, 0);
}
/* Raise to synchronization level and lock the PRCB and thread */
KeRaiseIrqlToSynchLevel();
KiAcquireThreadLock(Thread);
KiAcquirePrcbLock(Prcb);
/* Check if Quantum expired */
if (Thread->Quantum <= 0)
{
/* Check if we're real-time and with quantums disabled */
if ((Thread->Priority >= LOW_REALTIME_PRIORITY) &&
(Thread->ApcState.Process->DisableQuantum))
{
/* Otherwise, set maximum quantum */
Thread->Quantum = MAX_QUANTUM;
}
else
{
/* Reset the new Quantum */
Thread->Quantum = Thread->QuantumReset;
/* Calculate new priority */
Thread->Priority = KiComputeNewPriority(Thread, 1);
/* Check if a new thread is scheduled */
if (!Prcb->NextThread)
{
/* Get a new ready thread */
NextThread = KiSelectReadyThread(Thread->Priority, Prcb);
if (NextThread)
{
/* Found one, set it on standby */
NextThread->State = Standby;
Prcb->NextThread = NextThread;
}
}
else
{
/* Otherwise, make sure that this thread doesn't get preempted */
Thread->Preempted = FALSE;
}
}
}
/* Release the thread lock */
KiReleaseThreadLock(Thread);
/* Check if there's no thread scheduled */
if (!Prcb->NextThread)
{
/* Just leave now */
KiReleasePrcbLock(Prcb);
KeLowerIrql(DISPATCH_LEVEL);
return;
}
/* Get the next thread now */
NextThread = Prcb->NextThread;
/* Set current thread's swap busy to true */
KiSetThreadSwapBusy(Thread);
/* Switch threads in PRCB */
Prcb->NextThread = NULL;
Prcb->CurrentThread = NextThread;
/* Set thread to running and the switch reason to Quantum End */
NextThread->State = Running;
Thread->WaitReason = WrQuantumEnd;
/* Queue it on the ready lists */
KxQueueReadyThread(Thread, Prcb);
/* Set wait IRQL to APC_LEVEL */
Thread->WaitIrql = APC_LEVEL;
/* Swap threads */
KiSwapContext(APC_LEVEL, Thread);
/* Lower IRQL back to DISPATCH_LEVEL */
KeLowerIrql(DISPATCH_LEVEL);
}
VOID
FASTCALL
KiDeferredReadyThread(IN PKTHREAD Thread)
{
PKPRCB Prcb;
BOOLEAN Preempted;
ULONG Processor = 0;
KPRIORITY OldPriority;
PKTHREAD NextThread;
/* Sanity checks */
ASSERT(Thread->State == DeferredReady);
ASSERT((Thread->Priority >= 0) && (Thread->Priority <= HIGH_PRIORITY));
/* Check if we have any adjusts to do */
if (Thread->AdjustReason == AdjustBoost)
{
/* Lock the thread */
KiAcquireThreadLock(Thread);
/* Check if the priority is low enough to qualify for boosting */
if ((Thread->Priority <= Thread->AdjustIncrement) &&
(Thread->Priority < (LOW_REALTIME_PRIORITY - 3)) &&
!(Thread->DisableBoost))
{
/* Calculate the new priority based on the adjust increment */
OldPriority = min(Thread->AdjustIncrement + 1,
LOW_REALTIME_PRIORITY - 3);
/* Make sure we're not decreasing outside of the priority range */
ASSERT((Thread->PriorityDecrement >= 0) &&
(Thread->PriorityDecrement <= Thread->Priority));
/* Calculate the new priority decrement based on the boost */
Thread->PriorityDecrement += ((SCHAR)OldPriority - Thread->Priority);
/* Again verify that this decrement is valid */
ASSERT((Thread->PriorityDecrement >= 0) &&
(Thread->PriorityDecrement <= OldPriority));
/* Set the new priority */
Thread->Priority = (SCHAR)OldPriority;
}
/* We need 4 quanta, make sure we have them, then decrease by one */
if (Thread->Quantum < 4) Thread->Quantum = 4;
Thread->Quantum--;
/* Make sure the priority is still valid */
ASSERT((Thread->Priority >= 0) && (Thread->Priority <= HIGH_PRIORITY));
/* Release the lock and clear the adjust reason */
KiReleaseThreadLock(Thread);
Thread->AdjustReason = AdjustNone;
}
else if (Thread->AdjustReason == AdjustUnwait)
{
/* Acquire the thread lock and check if this is a real-time thread */
KiAcquireThreadLock(Thread);
if (Thread->Priority < LOW_REALTIME_PRIORITY)
{
/* It's not real time, but is it time critical? */
if (Thread->BasePriority >= (LOW_REALTIME_PRIORITY - 2))
{
/* It is, so simply reset its quantum */
Thread->Quantum = Thread->QuantumReset;
}
else
{
/* Has the priority been adjusted previously? */
if (!(Thread->PriorityDecrement) && (Thread->AdjustIncrement))
{
/* Yes, reset its quantum */
Thread->Quantum = Thread->QuantumReset;
}
/* Wait code already handles quantum adjustment during APCs */
if (Thread->WaitStatus != STATUS_KERNEL_APC)
{
/* Decrease the quantum by one and check if we're out */
if (--Thread->Quantum <= 0)
{
/* We are, reset the quantum and get a new priority */
Thread->Quantum = Thread->QuantumReset;
Thread->Priority = KiComputeNewPriority(Thread, 1);
}
}
}
/* Now check if we have no decrement and boosts are enabled */
if (!(Thread->PriorityDecrement) && !(Thread->DisableBoost))
{
/* Make sure we have an increment */
ASSERT(Thread->AdjustIncrement >= 0);
/* Calculate the new priority after the increment */
OldPriority = Thread->BasePriority + Thread->AdjustIncrement;
/* Check if this new priority is higher */
if (OldPriority > Thread->Priority)
{
/* Make sure we don't go into the real time range */
if (OldPriority >= LOW_REALTIME_PRIORITY)
{
/* Normalize it back down one notch */
OldPriority = LOW_REALTIME_PRIORITY - 1;
}
/* Check if the priority is higher then the boosted base */
if (OldPriority > (Thread->BasePriority +
Thread->AdjustIncrement))
{
/* Setup a priority decrement to nullify the boost */
Thread->PriorityDecrement = ((SCHAR)OldPriority -
Thread->BasePriority -
Thread->AdjustIncrement);
}
/* Make sure that the priority decrement is valid */
ASSERT((Thread->PriorityDecrement >= 0) &&
(Thread->PriorityDecrement <= OldPriority));
/* Set this new priority */
Thread->Priority = (SCHAR)OldPriority;
}
}
}
else
{
/* It's a real-time thread, so just reset its quantum */
Thread->Quantum = Thread->QuantumReset;
}
/* Make sure the priority makes sense */
ASSERT((Thread->Priority >= 0) && (Thread->Priority <= HIGH_PRIORITY));
/* Release the thread lock and reset the adjust reason */
KiReleaseThreadLock(Thread);
Thread->AdjustReason = AdjustNone;
}
/* Clear thread preemption status and save current values */
Preempted = Thread->Preempted;
OldPriority = Thread->Priority;
Thread->Preempted = FALSE;
/* Queue the thread on CPU 0 and get the PRCB and lock it */
Thread->NextProcessor = 0;
Prcb = KiProcessorBlock[0];
KiAcquirePrcbLock(Prcb);
/* Check if we have an idle summary */
if (KiIdleSummary)
{
/* Clear it and set this thread as the next one */
KiIdleSummary = 0;
Thread->State = Standby;
Prcb->NextThread = Thread;
/* Unlock the PRCB and return */
KiReleasePrcbLock(Prcb);
return;
}
/* Set the CPU number */
Thread->NextProcessor = (UCHAR)Processor;
/* Get the next scheduled thread */
NextThread = Prcb->NextThread;
if (NextThread)
{
/* Sanity check */
ASSERT(NextThread->State == Standby);
/* Check if priority changed */
if (OldPriority > NextThread->Priority)
{
/* Preempt the thread */
NextThread->Preempted = TRUE;
/* Put this one as the next one */
Thread->State = Standby;
Prcb->NextThread = Thread;
/* Set it in deferred ready mode */
NextThread->State = DeferredReady;
NextThread->DeferredProcessor = Prcb->Number;
KiReleasePrcbLock(Prcb);
KiDeferredReadyThread(NextThread);
return;
}
}
else
{
/* Set the next thread as the current thread */
NextThread = Prcb->CurrentThread;
if (OldPriority > NextThread->Priority)
{
/* Preempt it if it's already running */
if (NextThread->State == Running) NextThread->Preempted = TRUE;
/* Set the thread on standby and as the next thread */
Thread->State = Standby;
Prcb->NextThread = Thread;
/* Release the lock */
KiReleasePrcbLock(Prcb);
/* Check if we're running on another CPU */
if (KeGetCurrentProcessorNumber() != Thread->NextProcessor)
{
/* We are, send an IPI */
KiIpiSend(AFFINITY_MASK(Thread->NextProcessor), IPI_DPC);
}
return;
}
}
/* Sanity check */
ASSERT((OldPriority >= 0) && (OldPriority <= HIGH_PRIORITY));
/* Set this thread as ready */
Thread->State = Ready;
Thread->WaitTime = KeTickCount.LowPart;
/* Insert this thread in the appropriate order */
Preempted ? InsertHeadList(&Prcb->DispatcherReadyListHead[OldPriority],
&Thread->WaitListEntry) :
InsertTailList(&Prcb->DispatcherReadyListHead[OldPriority],
&Thread->WaitListEntry);
/* Update the ready summary */
Prcb->ReadySummary |= PRIORITY_MASK(OldPriority);
/* Sanity check */
ASSERT(OldPriority == Thread->Priority);
/* Release the lock */
KiReleasePrcbLock(Prcb);
}
/*
* @implemented
*/
NTSTATUS
NTAPI
NtYieldExecution(VOID)
{
NTSTATUS Status;
KIRQL OldIrql;
PKPRCB Prcb;
PKTHREAD Thread, NextThread;
/* NB: No instructions (other than entry code) should preceed this line */
/* Fail if there's no ready summary */
if (!KiGetCurrentReadySummary()) return STATUS_NO_YIELD_PERFORMED;
/* Now get the current thread, set the status... */
Status = STATUS_NO_YIELD_PERFORMED;
Thread = KeGetCurrentThread();
/* Raise IRQL to synch and get the KPRCB now */
OldIrql = KeRaiseIrqlToSynchLevel();
Prcb = KeGetCurrentPrcb();
/* Now check if there's still a ready summary */
if (Prcb->ReadySummary)
{
/* Acquire thread and PRCB lock */
KiAcquireThreadLock(Thread);
KiAcquirePrcbLock(Prcb);
/* Find a new thread to run if none was selected */
if (!Prcb->NextThread) Prcb->NextThread = KiSelectReadyThread(1, Prcb);
/* Make sure we still have a next thread to schedule */
NextThread = Prcb->NextThread;
if (NextThread)
{
/* Reset quantum and recalculate priority */
Thread->Quantum = Thread->QuantumReset;
Thread->Priority = KiComputeNewPriority(Thread, 1);
/* Release the thread lock */
KiReleaseThreadLock(Thread);
/* Set context swap busy */
KiSetThreadSwapBusy(Thread);
/* Set the new thread as running */
Prcb->NextThread = NULL;
Prcb->CurrentThread = NextThread;
NextThread->State = Running;
/* Setup a yield wait and queue the thread */
Thread->WaitReason = WrYieldExecution;
KxQueueReadyThread(Thread, Prcb);
/* Make it wait at APC_LEVEL */
Thread->WaitIrql = APC_LEVEL;
/* Sanity check */
ASSERT(OldIrql <= DISPATCH_LEVEL);
/* Swap to new thread */
KiSwapContext(APC_LEVEL, Thread);
Status = STATUS_SUCCESS;
}
else
{
/* Release the PRCB and thread lock */
KiReleasePrcbLock(Prcb);
KiReleaseThreadLock(Thread);
}
}
/* Lower IRQL and return */
KeLowerIrql(OldIrql);
return Status;
}
VOID
FASTCALL
KiSetPriorityThread(IN PKTHREAD Thread,
IN KPRIORITY Priority)
{
PKPRCB Prcb;
ULONG Processor;
BOOLEAN RequestInterrupt = FALSE;
KPRIORITY OldPriority;
PKTHREAD NewThread;
ASSERT((Priority >= 0) && (Priority <= HIGH_PRIORITY));
/* Check if priority changed */
if (Thread->Priority != Priority)
{
/* Loop priority setting in case we need to start over */
for (;;)
{
/* Choose action based on thread's state */
if (Thread->State == Ready)
{
/* Make sure we're not on the ready queue */
if (!Thread->ProcessReadyQueue)
{
/* Get the PRCB for the thread and lock it */
Processor = Thread->NextProcessor;
Prcb = KiProcessorBlock[Processor];
KiAcquirePrcbLock(Prcb);
/* Make sure the thread is still ready and on this CPU */
if ((Thread->State == Ready) &&
(Thread->NextProcessor == Prcb->Number))
{
/* Sanity check */
ASSERT((Prcb->ReadySummary &
PRIORITY_MASK(Thread->Priority)));
/* Remove it from the current queue */
if (RemoveEntryList(&Thread->WaitListEntry))
{
/* Update the ready summary */
Prcb->ReadySummary ^= PRIORITY_MASK(Thread->
Priority);
}
/* Update priority */
Thread->Priority = (SCHAR)Priority;
/* Re-insert it at its current priority */
KiInsertDeferredReadyList(Thread);
/* Release the PRCB Lock */
KiReleasePrcbLock(Prcb);
}
else
{
/* Release the lock and loop again */
KiReleasePrcbLock(Prcb);
continue;
}
}
else
{
/* It's already on the ready queue, just update priority */
Thread->Priority = (SCHAR)Priority;
}
}
else if (Thread->State == Standby)
{
/* Get the PRCB for the thread and lock it */
Processor = Thread->NextProcessor;
Prcb = KiProcessorBlock[Processor];
KiAcquirePrcbLock(Prcb);
/* Check if we're still the next thread to run */
if (Thread == Prcb->NextThread)
{
/* Get the old priority and update ours */
OldPriority = Thread->Priority;
Thread->Priority = (SCHAR)Priority;
/* Check if there was a change */
if (Priority < OldPriority)
{
/* Find a new thread */
NewThread = KiSelectReadyThread(Priority + 1, Prcb);
if (NewThread)
{
/* Found a new one, set it on standby */
NewThread->State = Standby;
Prcb->NextThread = NewThread;
/* Dispatch our thread */
KiInsertDeferredReadyList(Thread);
}
}
/* Release the PRCB lock */
KiReleasePrcbLock(Prcb);
}
else
{
/* Release the lock and try again */
KiReleasePrcbLock(Prcb);
continue;
}
}
else if (Thread->State == Running)
{
/* Get the PRCB for the thread and lock it */
Processor = Thread->NextProcessor;
Prcb = KiProcessorBlock[Processor];
KiAcquirePrcbLock(Prcb);
/* Check if we're still the current thread running */
if (Thread == Prcb->CurrentThread)
{
/* Get the old priority and update ours */
OldPriority = Thread->Priority;
Thread->Priority = (SCHAR)Priority;
/* Check if there was a change and there's no new thread */
if ((Priority < OldPriority) && !(Prcb->NextThread))
{
/* Find a new thread */
NewThread = KiSelectReadyThread(Priority + 1, Prcb);
if (NewThread)
{
/* Found a new one, set it on standby */
NewThread->State = Standby;
Prcb->NextThread = NewThread;
/* Request an interrupt */
RequestInterrupt = TRUE;
}
}
/* Release the lock and check if we need an interrupt */
KiReleasePrcbLock(Prcb);
if (RequestInterrupt)
{
/* Check if we're running on another CPU */
if (KeGetCurrentProcessorNumber() != Processor)
{
/* We are, send an IPI */
KiIpiSend(AFFINITY_MASK(Processor), IPI_DPC);
}
}
}
else
{
/* Thread changed, release lock and restart */
KiReleasePrcbLock(Prcb);
continue;
}
}
else if (Thread->State == DeferredReady)
{
/* FIXME: TODO */
DPRINT1("Deferred state not yet supported\n");
ASSERT(FALSE);
}
else
{
/* Any other state, just change priority */
Thread->Priority = (SCHAR)Priority;
}
/* If we got here, then thread state was consistent, so bail out */
break;
}
}
}
LONG_PTR
FASTCALL
KiSwapThread(IN PKTHREAD CurrentThread,
IN PKPRCB Prcb)
{
BOOLEAN ApcState = FALSE;
KIRQL WaitIrql;
LONG_PTR WaitStatus;
PKTHREAD NextThread;
ASSERT(KeGetCurrentIrql() >= DISPATCH_LEVEL);
/* Acquire the PRCB lock */
KiAcquirePrcbLock(Prcb);
/* Get the next thread */
NextThread = Prcb->NextThread;
if (NextThread)
{
/* Already got a thread, set it up */
Prcb->NextThread = NULL;
Prcb->CurrentThread = NextThread;
NextThread->State = Running;
}
else
{
/* Try to find a ready thread */
NextThread = KiSelectReadyThread(0, Prcb);
if (NextThread)
{
/* Switch to it */
Prcb->CurrentThread = NextThread;
NextThread->State = Running;
}
else
{
/* Set the idle summary */
InterlockedOrSetMember(&KiIdleSummary, Prcb->SetMember);
/* Schedule the idle thread */
NextThread = Prcb->IdleThread;
Prcb->CurrentThread = NextThread;
NextThread->State = Running;
}
}
/* Sanity check and release the PRCB */
ASSERT(CurrentThread != Prcb->IdleThread);
KiReleasePrcbLock(Prcb);
/* Save the wait IRQL */
WaitIrql = CurrentThread->WaitIrql;
/* Swap contexts */
ApcState = KiSwapContext(WaitIrql, CurrentThread);
/* Get the wait status */
WaitStatus = CurrentThread->WaitStatus;
/* Check if we need to deliver APCs */
if (ApcState)
{
/* Lower to APC_LEVEL */
KeLowerIrql(APC_LEVEL);
/* Deliver APCs */
KiDeliverApc(KernelMode, NULL, NULL);
ASSERT(WaitIrql == 0);
}
/* Lower IRQL back to what it was and return the wait status */
KeLowerIrql(WaitIrql);
return WaitStatus;
}
VOID
NTAPI
INIT_FUNCTION
KiInitializeKernel(IN PKPROCESS InitProcess,
IN PKTHREAD InitThread,
IN PVOID IdleStack,
IN PKPRCB Prcb,
IN CCHAR Number,
IN PLOADER_PARAMETER_BLOCK LoaderBlock)
{
BOOLEAN NpxPresent;
ULONG FeatureBits;
ULONG PageDirectory[2];
PVOID DpcStack;
ULONG Vendor[3];
/* Detect and set the CPU Type */
KiSetProcessorType();
/* Check if an FPU is present */
NpxPresent = KiIsNpxPresent();
/* Initialize the Power Management Support for this PRCB */
PoInitializePrcb(Prcb);
/* Bugcheck if this is a 386 CPU */
if (Prcb->CpuType == 3) KeBugCheckEx(UNSUPPORTED_PROCESSOR, 0x386, 0, 0, 0);
/* Get the processor features for the CPU */
FeatureBits = KiGetFeatureBits();
/* Set the default NX policy (opt-in) */
SharedUserData->NXSupportPolicy = NX_SUPPORT_POLICY_OPTIN;
/* Check if NPX is always on */
if (strstr(KeLoaderBlock->LoadOptions, "NOEXECUTE=ALWAYSON"))
{
/* Set it always on */
SharedUserData->NXSupportPolicy = NX_SUPPORT_POLICY_ALWAYSON;
FeatureBits |= KF_NX_ENABLED;
}
else if (strstr(KeLoaderBlock->LoadOptions, "NOEXECUTE=OPTOUT"))
{
/* Set it in opt-out mode */
SharedUserData->NXSupportPolicy = NX_SUPPORT_POLICY_OPTOUT;
FeatureBits |= KF_NX_ENABLED;
}
else if ((strstr(KeLoaderBlock->LoadOptions, "NOEXECUTE=OPTIN")) ||
(strstr(KeLoaderBlock->LoadOptions, "NOEXECUTE")))
{
/* Set the feature bits */
FeatureBits |= KF_NX_ENABLED;
}
else if ((strstr(KeLoaderBlock->LoadOptions, "NOEXECUTE=ALWAYSOFF")) ||
(strstr(KeLoaderBlock->LoadOptions, "EXECUTE")))
{
/* Set disabled mode */
SharedUserData->NXSupportPolicy = NX_SUPPORT_POLICY_ALWAYSOFF;
FeatureBits |= KF_NX_DISABLED;
}
/* Save feature bits */
Prcb->FeatureBits = FeatureBits;
/* Save CPU state */
KiSaveProcessorControlState(&Prcb->ProcessorState);
/* Get cache line information for this CPU */
KiGetCacheInformation();
/* Initialize spinlocks and DPC data */
KiInitSpinLocks(Prcb, Number);
/* Check if this is the Boot CPU */
if (!Number)
{
/* Set Node Data */
KeNodeBlock[0] = &KiNode0;
Prcb->ParentNode = KeNodeBlock[0];
KeNodeBlock[0]->ProcessorMask = Prcb->SetMember;
/* Set boot-level flags */
KeI386NpxPresent = NpxPresent;
KeI386CpuType = Prcb->CpuType;
KeI386CpuStep = Prcb->CpuStep;
KeProcessorArchitecture = PROCESSOR_ARCHITECTURE_INTEL;
KeProcessorLevel = (USHORT)Prcb->CpuType;
if (Prcb->CpuID) KeProcessorRevision = Prcb->CpuStep;
KeFeatureBits = FeatureBits;
KeI386FxsrPresent = (KeFeatureBits & KF_FXSR) ? TRUE : FALSE;
KeI386XMMIPresent = (KeFeatureBits & KF_XMMI) ? TRUE : FALSE;
/* Detect 8-byte compare exchange support */
if (!(KeFeatureBits & KF_CMPXCHG8B))
{
/* Copy the vendor string */
RtlCopyMemory(Vendor, Prcb->VendorString, sizeof(Vendor));
/* Bugcheck the system. Windows *requires* this */
KeBugCheckEx(UNSUPPORTED_PROCESSOR,
(1 << 24 ) | (Prcb->CpuType << 16) | Prcb->CpuStep,
Vendor[0],
Vendor[1],
Vendor[2]);
}
/* Set the current MP Master KPRCB to the Boot PRCB */
Prcb->MultiThreadSetMaster = Prcb;
/* Lower to APC_LEVEL */
KeLowerIrql(APC_LEVEL);
/* Initialize some spinlocks */
KeInitializeSpinLock(&KiFreezeExecutionLock);
KeInitializeSpinLock(&Ki486CompatibilityLock);
/* Initialize portable parts of the OS */
KiInitSystem();
/* Initialize the Idle Process and the Process Listhead */
InitializeListHead(&KiProcessListHead);
PageDirectory[0] = 0;
PageDirectory[1] = 0;
KeInitializeProcess(InitProcess,
0,
0xFFFFFFFF,
PageDirectory,
FALSE);
InitProcess->QuantumReset = MAXCHAR;
}
else
{
/* FIXME */
DPRINT1("SMP Boot support not yet present\n");
}
/* Setup the Idle Thread */
KeInitializeThread(InitProcess,
InitThread,
NULL,
NULL,
NULL,
NULL,
NULL,
IdleStack);
InitThread->NextProcessor = Number;
InitThread->Priority = HIGH_PRIORITY;
InitThread->State = Running;
InitThread->Affinity = 1 << Number;
InitThread->WaitIrql = DISPATCH_LEVEL;
InitProcess->ActiveProcessors = 1 << Number;
/* HACK for MmUpdatePageDir */
((PETHREAD)InitThread)->ThreadsProcess = (PEPROCESS)InitProcess;
/* Set basic CPU Features that user mode can read */
SharedUserData->ProcessorFeatures[PF_MMX_INSTRUCTIONS_AVAILABLE] =
(KeFeatureBits & KF_MMX) ? TRUE: FALSE;
SharedUserData->ProcessorFeatures[PF_COMPARE_EXCHANGE_DOUBLE] =
(KeFeatureBits & KF_CMPXCHG8B) ? TRUE: FALSE;
SharedUserData->ProcessorFeatures[PF_XMMI_INSTRUCTIONS_AVAILABLE] =
((KeFeatureBits & KF_FXSR) && (KeFeatureBits & KF_XMMI)) ? TRUE: FALSE;
SharedUserData->ProcessorFeatures[PF_XMMI64_INSTRUCTIONS_AVAILABLE] =
((KeFeatureBits & KF_FXSR) && (KeFeatureBits & KF_XMMI64)) ? TRUE: FALSE;
SharedUserData->ProcessorFeatures[PF_3DNOW_INSTRUCTIONS_AVAILABLE] =
(KeFeatureBits & KF_3DNOW) ? TRUE: FALSE;
SharedUserData->ProcessorFeatures[PF_RDTSC_INSTRUCTION_AVAILABLE] =
(KeFeatureBits & KF_RDTSC) ? TRUE: FALSE;
/* Set up the thread-related fields in the PRCB */
Prcb->CurrentThread = InitThread;
Prcb->NextThread = NULL;
Prcb->IdleThread = InitThread;
/* Initialize the Kernel Executive */
ExpInitializeExecutive(Number, LoaderBlock);
/* Only do this on the boot CPU */
if (!Number)
{
/* Calculate the time reciprocal */
KiTimeIncrementReciprocal =
KiComputeReciprocal(KeMaximumIncrement,
&KiTimeIncrementShiftCount);
/* Update DPC Values in case they got updated by the executive */
Prcb->MaximumDpcQueueDepth = KiMaximumDpcQueueDepth;
Prcb->MinimumDpcRate = KiMinimumDpcRate;
Prcb->AdjustDpcThreshold = KiAdjustDpcThreshold;
/* Allocate the DPC Stack */
DpcStack = MmCreateKernelStack(FALSE, 0);
if (!DpcStack) KeBugCheckEx(NO_PAGES_AVAILABLE, 1, 0, 0, 0);
Prcb->DpcStack = DpcStack;
/* Allocate the IOPM save area. */
Ki386IopmSaveArea = ExAllocatePoolWithTag(PagedPool,
PAGE_SIZE * 2,
' eK');
if (!Ki386IopmSaveArea)
{
/* Bugcheck. We need this for V86/VDM support. */
KeBugCheckEx(NO_PAGES_AVAILABLE, 2, PAGE_SIZE * 2, 0, 0);
}
}
/* Raise to Dispatch */
KfRaiseIrql(DISPATCH_LEVEL);
/* Set the Idle Priority to 0. This will jump into Phase 1 */
KeSetPriorityThread(InitThread, 0);
/* If there's no thread scheduled, put this CPU in the Idle summary */
KiAcquirePrcbLock(Prcb);
if (!Prcb->NextThread) KiIdleSummary |= 1 << Number;
KiReleasePrcbLock(Prcb);
/* Raise back to HIGH_LEVEL and clear the PRCB for the loader block */
KfRaiseIrql(HIGH_LEVEL);
LoaderBlock->Prcb = 0;
}
NTSTATUS
NtYieldExecution (
VOID
)
/*++
Routine Description:
This function yields execution to any ready thread for up to one
quantum.
Arguments:
None.
Return Value:
None.
--*/
{
KIRQL OldIrql;
PKTHREAD NewThread;
PRKPRCB Prcb;
NTSTATUS Status;
PKTHREAD Thread;
//
// If no other threads are ready, then return immediately. Otherwise,
// attempt to yield execution.
//
// N.B. The test for ready threads is made outside any synchonization.
// Since this code cannot be perfectly synchronized under any
// conditions the lack of synchronization is of no consequence.
//
if (KiGetCurrentReadySummary() == 0) {
return STATUS_NO_YIELD_PERFORMED;
} else {
Status = STATUS_NO_YIELD_PERFORMED;
Thread = KeGetCurrentThread();
OldIrql = KeRaiseIrqlToSynchLevel();
Prcb = KeGetCurrentPrcb();
if (Prcb->ReadySummary != 0) {
//
// Acquire the thread lock and the PRCB lock.
//
// If a thread has not already been selected for execution, then
// attempt to select another thread for execution.
//
KiAcquireThreadLock(Thread);
KiAcquirePrcbLock(Prcb);
if (Prcb->NextThread == NULL) {
Prcb->NextThread = KiSelectReadyThread(1, Prcb);
}
//
// If a new thread has been selected for execution, then switch
// immediately to the selected thread.
//
if ((NewThread = Prcb->NextThread) != NULL) {
Thread->Quantum = Thread->QuantumReset;
//
// Compute the new thread priority.
//
// N.B. The new priority will never be greater than the previous
// priority.
//
Thread->Priority = KiComputeNewPriority(Thread, 1);
//
// Release the thread lock, set swap busy for the old thread,
// set the next thread to NULL, set the current thread to the
// new thread, set the new thread state to running, set the
// wait reason, queue the old running thread, and release the
// PRCB lock, and swp context to the new thread.
//
KiReleaseThreadLock(Thread);
KiSetContextSwapBusy(Thread);
Prcb->NextThread = NULL;
Prcb->CurrentThread = NewThread;
NewThread->State = Running;
Thread->WaitReason = WrYieldExecution;
KxQueueReadyThread(Thread, Prcb);
Thread->WaitIrql = APC_LEVEL;
ASSERT(OldIrql <= DISPATCH_LEVEL);
KiSwapContext(Thread, NewThread);
Status = STATUS_SUCCESS;
} else {
KiReleasePrcbLock(Prcb);
KiReleaseThreadLock(Thread);
}
}
//
// Lower IRQL to its previous level and return.
//
KeLowerIrql(OldIrql);
return Status;
}
}
