void LCDSample(void)
{
LCDClear();
gotoXY(7,1);
LCDString("Nokia 5110");
gotoXY(4,2);
LCDString("Scroll Demo");
}
void Task_LCDMAN(void *pdata){
char* src;
INT8U err;
while(1){
src = (char*)OSMboxPend(Mbox_LCDMAN,0,&err);
LCDClear();
//LCDString(0,"ID:");
LCDString(0,src);
OSTimeDlyHMSM(0,0,3,0);
LCDClear();
LCDString(0," Bitman Lab\n Log System.");
}
}
void Main (void){
INT16U freq;
S3C_SysInit();
OSInit();
LCDInit();
LCDString(0x00," Bitman\n Spartan 117");
delay(10);
for(freq = 10;freq < 300;freq += 10){
S3C_SetPWMBuzzer(freq,freq/2);
delay(1);
}
LCDClear();
delay(8);
LCDString(0," Bitman Lab\n Log System.");
S3C_SetPWMBuzzer(650,10);
S3C_StartPWMBuzzer();
delay(3);
S3C_StopPWMBuzzer();
delay(1);
S3C_StartPWMBuzzer();
delay(3);
S3C_StopPWMBuzzer();
delay(10);
Sem_UART0Tx = OSSemCreate(1);
Sem_UART1Tx = OSSemCreate(1);
Mbox_UART0Rx = OSMboxCreate((void *)0);
Mbox_UART0Tx = OSMboxCreate((void *)0);
Mbox_LEDMAN = OSMboxCreate((void *)0);
Mbox_BEEPMAN = OSMboxCreate((void *)0);
Mbox_LCDMAN = OSMboxCreate((void *)0);
iOPcode = TYPE_DEFAULT;
OSTaskCreate(TaskStart,(void *)0,&Stk_TaskStart[99],10);
OSStart();
}
void main(void)
{
/* Initialize I/O and Peripherals for application */
InitApp(); //at end of user.c
led_counter=0;
spk_bit=0; //what are the spk_bits ???
led_bit=0;
LCDInit();
LCDClear();
gotoXY(1,11); //(1,11) is about halfway down
LCDString("PIC 16LF1786");
while(1)
{
/* TODO <INSERT USER APPLICATION CODE HERE> */
if(spk_bit==1)
{
if((spk_enable==1)&&(spk_enable2==1))
LATBbits.LATB6=1; //B6 is the clk in for uploading program to PIC
}else LATBbits.LATB6=0;
}
}
void loop() {
gotoXY(0, 5);
LCDString("Please wait.");
LCDClear();
gotoXY(0, 0);
LCDString("{BTC PRICES}");
gotoXY(0, 2);
LCDString("$= ");
gotoXY(0, 5);
LCDString("Updated! ");
delay(1000);
gotoXY(0, 5);
LCDString(" ");
gotoXY(0, 5);
for (int x=0; x <= 11; x++){
LCDString(".");
delay(1000);
}
gotoXY(0, 5);
for (int x=0; x <= 11; x++){
LCDString(" ");
delay(1000);
}
}
void routine(void) {
LCDClear();
LCDBitmap(bitcoin); // display Bitcoin Logo
delay(3000);
LCDClear();
gotoXY(0, 4);
LCDString("kendricktabi.com");
delay(3000);
LCDClear();
gotoXY(0, 0);
LCDString(" {Bitcoin!} ");
gotoXY(0, 2);
LCDString("Connecting ");
LCDString("to WiFi");
LCDClear();
gotoXY(0, 2);
LCDString(" WiFi ");
LCDString(" Connected! ");
delay(1000);
LCDClear();
for(;;) {
loop();
}
}
void LCDInit(void)
{
int i;
LCDReset();
LCDSend(PSWRESET); // software reset
SpinDelay(100);
LCDSend(PSLEEPOUT); // exit sleep mode
LCDSend(PBSTRON); // booster on
LCDSend(PDISPON); // display on
LCDSend(PNORON); // normal on
LCDSend(PMADCTL); // rotate display 180 deg
LCDSend(0xC0);
LCDSend(PCOLMOD); // color mode
LCDSend(0x02); // 8bpp color mode
LCDSend(PSETCON); // set contrast
LCDSend(0xDC);
// clear display
LCDSetXY(0,0);
LCDSend(PRAMWR); // Write to display
i=LCD_XRES*LCD_YRES;
while(i--) LCDSend(WHITE);
// test text on different colored backgrounds
LCDString(" The quick brown fox ", (char *)&FONT6x8,1,1+8*0,WHITE ,BLACK );
LCDString(" jumped over the ", (char *)&FONT6x8,1,1+8*1,BLACK ,WHITE );
LCDString(" lazy dog. ", (char *)&FONT6x8,1,1+8*2,YELLOW ,RED );
LCDString(" AaBbCcDdEeFfGgHhIiJj ", (char *)&FONT6x8,1,1+8*3,RED ,GREEN );
LCDString(" KkLlMmNnOoPpQqRrSsTt ", (char *)&FONT6x8,1,1+8*4,MAGENTA,BLUE );
LCDString("UuVvWwXxYyZz0123456789", (char *)&FONT6x8,1,1+8*5,BLUE ,YELLOW);
LCDString("`-=[]_;',./~!@#$%^&*()", (char *)&FONT6x8,1,1+8*6,BLACK ,CYAN );
LCDString(" _+{}|:\\\"<>? ",(char *)&FONT6x8,1,1+8*7,BLUE ,MAGENTA);
// color bands
LCDFill(0, 1+8* 8, 132, 8, BLACK);
LCDFill(0, 1+8* 9, 132, 8, WHITE);
LCDFill(0, 1+8*10, 132, 8, RED);
LCDFill(0, 1+8*11, 132, 8, GREEN);
LCDFill(0, 1+8*12, 132, 8, BLUE);
LCDFill(0, 1+8*13, 132, 8, YELLOW);
LCDFill(0, 1+8*14, 132, 8, CYAN);
LCDFill(0, 1+8*15, 132, 8, MAGENTA);
}
void loop(void) {
LCDClear();
LCDBitmap(SFEFlame);
delay(1000);
LCDClear();
LCDBitmap(SFEFlameBubble);
delay(1000);
LCDClear();
LCDBitmap(awesome);
delay(1000);
LCDClear();
LCDString("Hello World!");
delay(1000);
}
int main(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
//RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE); //enable gpioB peripherial clock
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE); //enable gpioA peripherial clock
GPIO_InitStructure.GPIO_Pin = SCE|RES|DC|SCLK|SDIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_SetBits(GPIOA, SCE|RES|DC|SCLK|SDIN);
LCDinit(); //initialize LCD parameters
while(count--)
{
LCDString("Hello worlds! ");
}
setXY(0,5);
//while(count2--){
//writeCharInv('C');
// }
newString("0.123457",0,2);
floatToString(value-count2);
newFont('V',55,5);
/*To Do:
*/
return 0;
}
void ProcessIO(void)
{
//Blink the LEDs according to the USB device status
//BlinkUSBStatus();
//C short circuit makes this work
if(PORTBbits.RB13 && button_pressed < 250)
{
button_pressed += 1;
}
else if (!PORTBbits.RB13)
{
button_cnt = 0;
button_pressed = 0;
}
getTouchUL();
getTouchUR();
getTouchRU();
getTouchRL();
frontBack = PORTAbits.RA8 ;
shake = PORTBbits.RB8 ;
// User Application USB tasks
if((USBDeviceState < CONFIGURED_STATE)||(USBSuspendControl==1)) return;
{
unsigned char nread=0, i;
nread = getsUSBUSART(USB_In_Buffer,64); //until the buffer is free.
if(nread > 0) {
/* speaker */
//LATAbits.LATA9 = !LATAbits.LATA9;
if (USB_In_Buffer[0] == 92)
play_count ^= 0x8000;
play_count |= 0x0001;
/* serial byte led */
//LATBbits.LATB15 = !LATBbits.LATB15;
//LATBbits.LATB1 = 1;//!LATBbits.LATB1;
/* contrast byte */
if (USB_In_Buffer[0] == '-') {
char printme[8];
gContrast--;
printme[0] = 48 + (unsigned char)gContrast / 100;
printme[1] = 48 + ((unsigned char)gContrast % 100) / 10;
printme[2] = 48 + ((unsigned char)gContrast % 100) % 10;
printme[3] = 0;
LCDString(printme);
LCDInit(); //Init the LCD
USB_In_Buffer[0] = 0;
nread == 0;
}
if ((USB_In_Buffer[0] == '=') || (USB_In_Buffer[0] == '+')) {
char printme[8];
gContrast++;
printme[0] = 48 + (unsigned char)gContrast / 100;
printme[1] = 48 + ((unsigned char)gContrast % 100) / 10;
printme[2] = 48 + ((unsigned char)gContrast % 100) % 10;
printme[3] = 0;
LCDString(printme);
LCDInit(); //Init the LCD
USB_In_Buffer[0] = 0;
nread == 0;
}
// special character that are not echoed to LCD
if ((USB_In_Buffer[0] == 127)
| (USB_In_Buffer[0] == 27)
| (USB_In_Buffer[0] == '[')) {
void LCDLogo();
/* backspace == clear screen */
if (USB_In_Buffer[0] == 127) LCDClear();
/* backlight byte */
if (USB_In_Buffer[0] == 27) LATBbits.LATB7 = !LATBbits.LATB7;
/* hackrva logo */
if (USB_In_Buffer[0] == '[') LCDLogo();
USB_In_Buffer[0] = 0;
nread == 0;
}
if (USB_In_Buffer[0] == ',') {
unsigned char printme[8];
void gotoXY(int x, int y);
char left = G_side_slider_left;
char right = G_side_slider_right;
gotoXY(0, 40);
printme[0] = 'L';
printme[1] = 48 + (unsigned char)left / 100;
printme[2] = 48 + ((unsigned char)left % 100) / 10;
printme[3] = 48 + ((unsigned char)left % 100) % 10;
printme[4] = 32;
printme[5] = 0;
LCDString(printme);
for (i=0; printme[i] !=0 ; i++)
USB_Out_Buffer[NextUSBOut++] = printme[i];
USB_Out_Buffer[NextUSBOut++] = ' ';
gotoXY(42, 40);
printme[0] = 'R';
printme[1] = 48 + (unsigned char)right / 100;
printme[2] = 48 + ((unsigned char)right % 100) / 10;
printme[3] = 48 + ((unsigned char)right % 100) % 10;
printme[4] = 32;
printme[5] = 0;
LCDString(printme);
for (i=0; printme[i] !=0 ; i++)
USB_Out_Buffer[NextUSBOut++] = printme[i];
USB_Out_Buffer[NextUSBOut++] = '\r';
USB_Out_Buffer[NextUSBOut++] = '\n';
USB_In_Buffer[0] = 0;
nread == 0;
}
if (USB_In_Buffer[0] == '.') {
USB_In_Buffer[0] = 0;
nread == 0;
}
if (USB_In_Buffer[0] == '/') {
unsigned char printme[16];
void gotoXY(int x, int y);
int setupRTCC(void);
// shake sensor
gotoXY(0, 41);
printme[0] = 'S';
printme[1] = 48 + (unsigned char)shake / 100;
printme[2] = 48 + ((unsigned char)shake % 100) / 10;
printme[3] = 48 + ((unsigned char)shake % 100) % 10;
printme[4] = 32;
printme[5] = 0;
LCDString(printme);
for (i=0; printme[i] !=0 ; i++)
USB_Out_Buffer[NextUSBOut++] = printme[i];
USB_Out_Buffer[NextUSBOut++] = ' ';
// front sensor
gotoXY(42, 41);
printme[0] = 'F';
printme[1] = 48 + (unsigned char)frontBack / 100;
printme[2] = 48 + ((unsigned char)frontBack % 100) / 10;
printme[3] = 48 + ((unsigned char)frontBack % 100) % 10;
printme[4] = 32;
printme[5] = 0;
LCDString(printme);
for (i=0; printme[i] !=0 ; i++)
USB_Out_Buffer[NextUSBOut++] = printme[i];
// secondary clock running status
printme[0] = hextab[(OSCCON >> 28) & 0xF];
printme[1] = hextab[(OSCCON >> 24) & 0xF];
printme[2] = hextab[(OSCCON >> 20) & 0xF];
printme[3] = hextab[(OSCCON >> 16) & 0xF];
printme[4] = hextab[(OSCCON >> 12) & 0xF];
printme[5] = hextab[(OSCCON >> 8) & 0xF];
printme[6] = hextab[(OSCCON >> 4) & 0xF];
printme[7] = hextab[(OSCCON ) & 0xF];
printme[7] = 0;
LCDString(printme);
for (i=0; printme[i] !=0 ; i++)
USB_Out_Buffer[NextUSBOut++] = printme[i];
printme[0] = 'R';
printme[1] = 'T';
printme[2] = 'C';
printme[3] = 'C';
printme[4] = ':';
printme[5] = setupRTCC();
printme[6] = 0;
LCDString(printme);
for (i=0; printme[i] !=0 ; i++)
USB_Out_Buffer[NextUSBOut++] = printme[i];
USB_Out_Buffer[NextUSBOut++] = '\r';
USB_Out_Buffer[NextUSBOut++] = '\n';
USB_In_Buffer[0] = 0;
nread == 0;
}
// IR xmit
if (USB_In_Buffer[0] == '>') {
LATCbits.LATC1 = !LATCbits.LATC1;
USB_In_Buffer[0] = 0;
nread == 0;
}
// IR recv
#define IR_RECV PORTCbits.RC1
// print anything not handled above
if (USB_In_Buffer[0] != 0) {
char printme[32];
for (i=0; i<nread; i++)
printme[i] = USB_In_Buffer[i];
printme[i] = 0;
LCDString(printme);
LCDInit(); //Init the LCD
}
for (i=0; i<nread; i++,NextUSBOut++) {
USB_Out_Buffer[NextUSBOut] = USB_In_Buffer[i];
}
}
// echo back to USB
if ((USBUSARTIsTxTrfReady()) && (NextUSBOut > 0)) {
putUSBUSART(&USB_Out_Buffer[0], NextUSBOut);
NextUSBOut = 0;
}
}
void LCDStringPos (const char *aStr, uint8_t aPos, uint8_t aY)
{
uint8_t x = aPos * G_CharWidth;
LCDString(aStr, x, aY);
}
void LCDStringLine (const char *aStr, uint8_t aX, uint8_t aLine)
{
uint8_t y = aLine * G_CharHeight;
LCDString(aStr, aX, y);
}
