/**
* \brief Read data from LCD Register.
*
* \param uc_reg register address.
*
* \return register value.
*/
static uint16_t ili9325_read_register(uint8_t uc_reg)
{
LCD_IR(0);
LCD_IR(uc_reg);
return ili9325_lcd_get_16();
}
/**
* \brief Write data to LCD Register.
*
* \param uc_reg register address.
* \param us_data data to be written.
*/
static void ili9325_write_register(uint8_t uc_reg, uint16_t us_data)
{
LCD_IR(0);
LCD_IR(uc_reg);
LCD_WD((us_data >> 8) & 0xFF);
LCD_WD(us_data & 0xFF);
}
char LCD_Busy()
{
char data;
//D4 - D7 = PORTA 4-7
//RS(PC7) = 0, RW(PC6) = 1, E(PC0)
LCD_IR();
LCD_R();
//Tu beremo zgornje 4 bite
LCD_E_set();
asm("nop");
asm("nop");
data = LCD_DataPin; //preberi zgornje stiri bite
LCD_E_clr();
asm("nop");
asm("nop");
//Tu beremo spodnje 4 bite (samo da jih v bistvu ignoriramo)
LCD_E_set();
asm("nop");
asm("nop");
LCD_E_clr();
if (data & 0x80) return 1; // if busy flag is 1, its busy
else return 0; // LCD is ready to do your bidding
}
//************************************
// Method: LCD_Write
// FullName: LCD_Write
// Access: public
// Returns: void
// Qualifier: Funkcija vpiše podatek v LCD
// Parameter: enum LCD_Register reg
// Parameter: char data
//************************************
void LCD_Write(enum LCD_Register reg, char data)
{
char temp;
LCD_BusyWait(1000);
//D4 - D7 = PORTA 4-7
if (reg == Instr) LCD_IR(); // piši v inštrukcijski register
else LCD_DR(); // piši v podatkovni register
LCD_W();
LCD_E_set();
// write high nibble
temp = data>>4; // dddd 0000 -> 0000 dddd
LCD_Write_Nibble(temp);
LCD_E_clr();
asm("nop");
asm("nop");
LCD_E_set();
// write low nibble
temp = data & 0x0F; // 0000 dddd
LCD_Write_Nibble(temp);
LCD_E_clr();
}
/**
* \brief Draw a bitmap image.
* Expected file format is 320x240, 24 bits, RGB888.
*
* \param bmpImage Pointer to the bmp file image.
*/
static void gfx_draw_bmpfile(const uint8_t *bmpImage)
{
struct bmpfile_header *bmp_header;
uint32_t length;
uint32_t i = 0;
uint32_t offset;
bmp_header = (struct bmpfile_header *) bmpImage;
length = bmp_header->height * bmp_header->width * 3;
offset = sizeof(struct bmpfile_header);
if (ili93xx_device_type() == DEVICE_TYPE_ILI9325) {
ili93xx_set_cursor_position(0, 0);
/* Prepare to write in GRAM. */
LCD_IR(0);
LCD_IR(ILI9325_GRAM_DATA_REG);
for (i = offset; i < length; i += 3) {
/* Invert red and blue. */
LCD_WD(bmpImage[i + 2]);
LCD_WD(bmpImage[i + 1]);
LCD_WD(bmpImage[i]);
}
}
else if (ili93xx_device_type() == DEVICE_TYPE_ILI9341) {
ili93xx_set_window(0, 0, bmp_header->width - 15, bmp_header->height);
LCD_IR(ILI9341_CMD_MEMORY_WRITE); /* memory write command (R2Ch) */
LCD_IR(ILI9341_CMD_WRITE_MEMORY_CONTINUE);
/* The original image is mirrored. */
for (i = bmp_header->height - 1 ; (i * bmp_header->width * 3) > offset ; i -= 1)
for (uint16_t j = 45; j < (bmp_header->width * 3); j += 3) {
LCD_WD(bmpImage[i * bmp_header->width * 3 + j + 2]);
LCD_WD(bmpImage[i * bmp_header->width * 3 + j + 1]);
LCD_WD(bmpImage[i * bmp_header->width * 3 + j]);
}
}
}
//************************************
// Method: LCD_Init
// FullName: LCD_Init
// Access: public
// Returns: void
// Qualifier: Funkcija inicializira LCD
//************************************
void LCD_Init()
{
//nastavi ustrezne pine kot izhode
LCD_E_Dir |= LCD_E_Mask;
LCD_RS_Dir |= LCD_RS_Mask;
LCD_RW_Dir |= LCD_RW_Mask;
LCD_DataDir |= LCD_DataMask;
LCD_Backlight_Dir |= LCD_Backlight_Mask;
LCD_Backlight_ON();
_delay_ms(15);
LCD_IR();
LCD_W();
LCD_E_set();
LCD_Write_Nibble(3);
LCD_E_clr();
_delay_ms(5);
LCD_E_set();
LCD_Write_Nibble(3);
LCD_E_clr();
_delay_ms(100);
LCD_E_set();
LCD_Write_Nibble(3);
LCD_E_clr();
LCD_BusyWait(1000);
LCD_E_set();
LCD_Write_Nibble(2);
LCD_E_clr();
LCD_Write(Instr,0x28); //4-bit interface (bit4)
LCD_Write(Instr,0x08);
LCD_Write(Instr,0x01);
LCD_Write(Instr,0x06); //B1=1(Left to Right?) B0=0(no display shift)
LCD_Write(Instr,0x0F); //Display, cursor, blink, all on.
}
/**
* \brief Prepare to read GRAM data.
*/
static void ili9325_read_ram_prepare(void)
{
LCD_IR(0);
LCD_IR(ILI9325_GRAM_DATA_REG); /* Write Data to GRAM (R22h) */
}
