Example #1
0
void Resize(Window w, unsigned width, unsigned height)
{
    if (w != topWindow)
	return;

    /* ignore illegal resizes */
    LIMIT(width, MIN_TOP_WIDTH, MAX_TOP_WIDTH);
    LIMIT(height, MIN_TOP_HEIGHT, MAX_TOP_HEIGHT);
    top_width = width;
    top_height = height;
    if (!drawWindow)
	return;

    if (radar_score_mapped)
	draw_width = top_width - 258;
    else
	draw_width = top_width;
    draw_height = top_height;

    Check_view_dimensions();
    Net_flush();
    XResizeWindow(dpy, drawWindow, draw_width, draw_height);
    if (dbuf_state->type == PIXMAP_COPY) {
	XFreePixmap(dpy, drawPixmap);
	drawPixmap = XCreatePixmap(dpy, drawWindow, draw_width, draw_height,
				   dispDepth);
    }
    players_height = top_height - (RadarHeight + ButtonHeight + 2);
    XResizeWindow(dpy, playersWindow,
		  players_width, players_height);
    Talk_resize();
    Config_resize();
}
Example #2
0
void 
run_adding_AutoPan(LADSPA_Handle Instance,
		   unsigned long SampleCount) {
  
	AutoPan * ptr = (AutoPan *)Instance;

	LADSPA_Data * input_L = ptr->input_L;
	LADSPA_Data * input_R = ptr->input_R;
	LADSPA_Data * output_L = ptr->output_L;
	LADSPA_Data * output_R = ptr->output_R;
	LADSPA_Data freq = LIMIT(*(ptr->freq),0.0f,20.0f);
	LADSPA_Data depth = LIMIT(*(ptr->depth),0.0f,100.0f);
	LADSPA_Data gain = db2lin(LIMIT(*(ptr->gain),-70.0f,20.0f));
	unsigned long sample_index;
	LADSPA_Data phase_L = 0;
	LADSPA_Data phase_R = 0;
	
	for (sample_index = 0; sample_index < SampleCount; sample_index++) {
		phase_L = 1024.0f * freq * sample_index / ptr->SampleRate + ptr->Phase;
		while (phase_L >= 1024.0f)
		        phase_L -= 1024.0f;  
 		phase_R = phase_L + 512.0f;
		while (phase_R >= 1024.0f)
		        phase_R -= 1024.0f;  

		*(output_L++) += *(input_L++) * gain * ptr->run_adding_gain *
			(1 - 0.5*depth/100 + 0.5 * depth/100 * cos_table[(unsigned long) phase_L]);
		*(output_R++) += *(input_R++) * gain * ptr->run_adding_gain *
			(1 - 0.5*depth/100 + 0.5 * depth/100 * cos_table[(unsigned long) phase_R]);
	}
	ptr->Phase = phase_L;
	while (ptr->Phase >= 1024.0f)
		ptr->Phase -= 1024.0f;
}
Example #3
0
void 
run_adding_Tremolo(LADSPA_Handle Instance,
		   unsigned long SampleCount) {
  
	LADSPA_Data * input;
	LADSPA_Data * output;
	LADSPA_Data freq;
	LADSPA_Data depth;
	LADSPA_Data gain;
	Tremolo * ptr;
	unsigned long sample_index;
	LADSPA_Data phase = 0.0f;
	
	ptr = (Tremolo *)Instance;
	
	input = ptr->InputBuffer_1;
	output = ptr->OutputBuffer_1;
	freq = LIMIT(*(ptr->Control_Freq),0.0f,20.0f);
	depth = LIMIT(*(ptr->Control_Depth),0.0f,100.0f);
	gain = db2lin(LIMIT(*(ptr->Control_Gain),-70.0f,20.0f));

  	for (sample_index = 0; sample_index < SampleCount; sample_index++) {
		phase = 1024.0f * freq * sample_index / ptr->SampleRate + ptr->Phase;

		while (phase >= 1024.0f)
			phase -= 1024.0f;

		*(output++) += *(input++) * ptr->run_adding_gain * gain *
			(1 - 0.5*depth/100 + 0.5 * depth/100 * cos_table[(unsigned long) phase]);
	}
	ptr->Phase = phase;
	while (ptr->Phase >= 1024.0f)
		ptr->Phase -= 1024.0f;
}
Example #4
0
void
run_Tremolo(LV2_Handle Instance,
	    uint32_t SampleCount) {

	float * input;
	float * output;
	float freq;
	float depth;
	float gain;
	Tremolo * ptr;
	double sample_index;
	float phase = 0.0f;

	ptr = (Tremolo *)Instance;

	input = ptr->InputBuffer_1;
	output = ptr->OutputBuffer_1;
	freq = LIMIT(*(ptr->Control_Freq),0.0f,20.0f);
	depth = LIMIT(*(ptr->Control_Depth),0.0f,100.0f);
	gain = db2lin(LIMIT(*(ptr->Control_Gain),-70.0f,20.0f));

  	for (sample_index = 0; sample_index < SampleCount; sample_index++) {
		phase = 1024.0f * freq * sample_index / ptr->SampleRate + ptr->Phase;

		while (phase >= 1024.0f)
			phase -= 1024.0f;

		*(output++) = *(input++) * gain *
			(1 - 0.5*depth/100 + 0.5 * depth/100 * cos_table[(unsigned long) phase]);
	}
	ptr->Phase = phase;
	while (ptr->Phase >= 1024.0f)
		ptr->Phase -= 1024.0f;
}
Example #5
0
void 
run_adding_Vibrato(LADSPA_Handle Instance,
		   unsigned long SampleCount) {
  
	Vibrato * ptr = (Vibrato *)Instance;

	LADSPA_Data freq = LIMIT(*(ptr->freq),0.0f,PM_FREQ);
	LADSPA_Data depth = 
		LIMIT(LIMIT(*(ptr->depth),0.0f,20.0f) * ptr->sample_rate / 200.0f / M_PI / freq,
		      0, ptr->buflen / 2);
	LADSPA_Data drylevel = db2lin(LIMIT(*(ptr->drylevel),-90.0f,20.0f));
	LADSPA_Data wetlevel = db2lin(LIMIT(*(ptr->wetlevel),-90.0f,20.0f));
	LADSPA_Data * input = ptr->input;
	LADSPA_Data * output = ptr->output;

	unsigned long sample_index;
	unsigned long sample_count = SampleCount;

	LADSPA_Data in = 0.0f;
	LADSPA_Data phase = 0.0f;
	LADSPA_Data fpos = 0.0f;
	LADSPA_Data n = 0.0f;
	LADSPA_Data rem = 0.0f;
	LADSPA_Data s_a, s_b;


	if (freq == 0.0f)
		depth = 0.0f;

	for (sample_index = 0; sample_index < sample_count; sample_index++) {

		in = *(input++);

		phase = COS_TABLE_SIZE * freq * sample_index / ptr->sample_rate + ptr->phase;
		while (phase >= COS_TABLE_SIZE)
		        phase -= COS_TABLE_SIZE;

		push_buffer(in, ptr->ringbuffer, ptr->buflen, &(ptr->pos));

		fpos = depth * (1.0f - cos_table[(unsigned long) phase]);
		n = floorf(fpos);
		rem = fpos - n;

		s_a = read_buffer(ptr->ringbuffer, ptr->buflen, ptr->pos, (unsigned long) n);
		s_b = read_buffer(ptr->ringbuffer, ptr->buflen, ptr->pos, (unsigned long) n + 1);

		*(output++) += ptr->run_adding_gain * wetlevel * ((1 - rem) * s_a + rem * s_b) +
			drylevel * read_buffer(ptr->ringbuffer, ptr->buflen,
					       ptr->pos, ptr->buflen / 2);

	}

	ptr->phase += COS_TABLE_SIZE * freq * sample_index / ptr->sample_rate;
	while (ptr->phase >= COS_TABLE_SIZE)
		ptr->phase -= COS_TABLE_SIZE;

	*(ptr->latency) = ptr->buflen / 2;
}
Example #6
0
unsigned int	revers_filter(unsigned int color, UNUSED t_opt *opt)
{
  unsigned char	comp[3];

  decomp_color(color, comp);
  comp[0] = LIMIT(2.0 * (128 - comp[0]) + comp[0], 0, 255);
  comp[1] = LIMIT(2.0 * (128 - comp[1]) + comp[1], 0, 255);
  comp[2] = LIMIT(2.0 * (128 - comp[2]) + comp[2], 0, 255);
  return (recomp_color(comp));
}
static void i80286_data_descriptor_full(i80286_state *cpustate, int reg, UINT16 selector, int cpl, UINT32 trap, UINT16 offset, int size)
{
	if (PM) {
		UINT16 desc[3];
		UINT8 r;
		UINT32 addr;
		/* selector format
           15..3 number/address in descriptor table
           2: 0 global, 1 local descriptor table
           1,0: requested privileg level
           must be higher or same as current privileg level in code selector */
		if ((reg != SS) && !IDXTBL(selector)) {
			cpustate->sregs[reg]=0;
			cpustate->limit[reg]=0;
			cpustate->base[reg]=0;
			cpustate->rights[reg]=0;
			cpustate->valid[reg]=0;
			return;
		}

		if ((addr = i80286_selector_address(cpustate,selector)) == -1) throw trap;

		desc[0] = ReadWord(addr);
		desc[1] = ReadWord(addr+2);
		desc[2] = ReadWord(addr+4);
		r = RIGHTS(desc);
		if (!SEGDESC(r)) throw trap;
		if (reg == SS) {
			if (!IDXTBL(selector)) throw trap;
			if (DPL(r)!=cpl) throw trap;
			if (RPL(selector)!=cpl) throw trap;
			if (!RW(r) || CODE(r)) throw trap;
			if (!PRES(r)) throw TRAP(STACK_FAULT,(IDXTBL(selector)+(trap&1)));
		} else {
			if ((DPL(r) < PMAX(cpl,RPL(selector))) && (!CODE(r) || (CODE(r) && !CONF(r)))) throw trap;
			if (CODE(r) && !READ(r)) throw trap;
			if (!PRES(r)) throw TRAP(SEG_NOT_PRESENT,(IDXTBL(selector)+(trap&1)));
		}
		if (offset+size) {
			if ((CODE(r) || !EXPDOWN(r)) && ((offset+size-1) > LIMIT(desc))) throw (reg==SS)?TRAP(STACK_FAULT,(trap&1)):trap;
			if (!CODE(r) && EXPDOWN(r) && ((offset <= LIMIT(desc)) || ((offset+size-1) > 0xffff))) throw (reg==SS)?TRAP(STACK_FAULT,(trap&1)):trap;
		}

		SET_ACC(desc);
		WriteWord(addr+4, desc[2]);
		cpustate->sregs[reg]=selector;
		cpustate->limit[reg]=LIMIT(desc);
		cpustate->base[reg]=BASE(desc);
		cpustate->rights[reg]=RIGHTS(desc);
	} else {
		cpustate->sregs[reg]=selector;
		cpustate->base[reg]=selector<<4;
	}
	cpustate->valid[reg]=1;
}
Example #8
0
/**
 * @brief AND each 
 *
 * @param dataOut
 * @param dataIn
 * @param row
 * @param col
 * @param step
 * @param KernelArray
 * @param m
 * @param n
 */
void fandFilter (char *dataOut, char *dataIn, int row,int col,int step,int* KernelArray,int m,int n )
{
    unsigned char bits[9] ;
    int flag[3];
    if(KernelArray == 0) return ;
    for(int rgb =0;rgb < 3;rgb++){
    bits[0] = LIMIT(dataIn P(row-1,col-1,step,rgb));
    bits[1] = LIMIT(dataIn P(row-1,col,  step,rgb));
    bits[2] = LIMIT(dataIn P(row-1,col+1,step,rgb));
    bits[3] = LIMIT(dataIn P(row  ,col-1,step,rgb));
    bits[4] = LIMIT(dataIn P(row  ,col  ,step,rgb));
    bits[5] = LIMIT(dataIn P(row  ,col+1,step,rgb));
    bits[6] = LIMIT(dataIn P(row+1,col-1,step,rgb));
    bits[7] = LIMIT(dataIn P(row+1,col  ,step,rgb));
    bits[8] = LIMIT(dataIn P(row+1,col+1,step,rgb));
    
    flag[rgb] = (bits[4] * KA[4] ) ^ ( ( bits[1] * KA[1] ) |
                                  ( bits[3] * KA[3] ) |
                                  ( bits[5] * KA[5] ) |
                                  ( bits[7] * KA[7] ) );
    //if(flag) 
    //    dataOutP(row,col,step,rgb) = 255;
    //else
    //    dataOutP(row,col,step,rgb) = 0;
    }
    if(flag[0] | flag[1] | flag[2]){
            dataOutP(row,col,step,0) = 0;
            dataOutP(row,col,step,1) = 0;
            dataOutP(row,col,step,2) = 0;
    }else{
            dataOutP(row,col,step,0) =  dataInP(row,col,step,0);
            dataOutP(row,col,step,1) =dataInP(row,col,step,1);
            dataOutP(row,col,step,2) =dataInP(row,col,step,2);
    }
}
Example #9
0
File: filter.c Project: Tastyep/rt
unsigned int	gamma_filter(unsigned int color, double gamma)
{
  unsigned char	comp[3];

  gamma = 1.0 / gamma;
  decomp_color(color, comp);
  comp[0] = LIMIT(encode_srgb(comp[0], gamma), 0, 255);
  comp[1] = LIMIT(encode_srgb(comp[1], gamma), 0, 255);
  comp[2] = LIMIT(encode_srgb(comp[2], gamma), 0, 255);
  return (recomp_color(comp));
}
Example #10
0
void SetPwm_5(int16_t pwm_3,int16_t pwm_4,s16 min,s16 max)
{
	s16 pwm_tem_3,pwm_tem_4;
	
	pwm_tem_3 = pwm_3 ;
	pwm_tem_3 = LIMIT(pwm_tem_3,min,max);
	pwm_tem_4 = pwm_4 ;
	pwm_tem_4 = LIMIT(pwm_tem_4,min,max);
	
 	TIM5->CCR4 = pwm_tem_4 + INIT_DUTY;				//4	
 	TIM5->CCR3 = pwm_tem_3 + INIT_DUTY;				//3	
}
Example #11
0
File: sound1.c Project: alzwded/etc
void audio_callback(void* data, Uint8* stream, int length)
{
    int j;
    SDL_AudioSpec spec = *((SDL_AudioSpec*)data);
    float factor = 126.f;
    if(stuff[i]) {
        int totl = spec.freq / (stuff[i]/2);
        switch(method) {
        case SQUARE:
            for(j = 0; j < length; ++j) {
                // half the period output MAX
                if(k < totl/2) {
                    stream[j] = factor;
                // half output 0
                } else {
                    stream[j] = 0;
                }
                k = (k + 1) % totl;
            }
            break;
        case TRIANGLE:
            for(j = 0; j < length; ++j) {
                // first quarter-period, increasing linear function [0..MAX]
                if(k < totl/4) {
                    stream[j] = (Uint8)LIMIT(factor * ((float)k / (totl/4.f)));
                // second and third quarters, decreasing linear function [MAX..-MAX]
                } else if(k < 3*totl/4) {
                    stream[j] = (Uint8)LIMIT(factor * (
                                ((float)totl/2.f - (float)k)/(totl/4.f)));
                // fourth quarter, increasing linear function [-MAX..0]
                } else {
                    stream[j] = (Uint8)LIMIT(factor * (
                                (float)(k - totl) / (totl/4.)));
                }
                k = (k + 1) % totl;
            }
            break;
        case SINE:
            for(j = 0; j < length; ++j) {
                // I don't understand what the deal with the frequency is
                //     that I DON'T have to multiply by 2 here...
                // Anyway, compared with a reference sound and indeed this
                //     is the correct frequency (somehow)
                stream[j] = (Uint8)(factor * sin(k * stuff[i] * M_PI / (float)spec.freq));
                k = (k + 1) % totl;
            }
            break;
        }
    } else {
        // if we aren't supposed to output any sound, set the buffer to 0
        memset(stream, 0, length);
    }
}
void question(int x) {
  MIN(x++, 12);
  // CHECK-MESSAGES: :[[@LINE-1]]:7: warning: side effects in the 1st macro argument 'A'
  MIN(34, x++);
  // CHECK-MESSAGES: :[[@LINE-1]]:11: warning: side effects in the 2nd macro argument 'B'
  LIMIT(x++, 0, 100);
  // CHECK-MESSAGES: :[[@LINE-1]]:9: warning: side effects in the 1st macro argument 'X'
  LIMIT(20, x++, 100);
  // CHECK-MESSAGES: :[[@LINE-1]]:13: warning: side effects in the 2nd macro argument 'A'
  LIMIT(20, 0, x++);
  // CHECK-MESSAGES: :[[@LINE-1]]:16: warning: side effects in the 3rd macro argument 'B'
}
Example #13
0
unsigned int	saturation(unsigned int color, double val)
{
  double	pert;
  unsigned char	comp[3];

  decomp_color(color, comp);
  pert = sqrt(comp[0] * comp[0] * 0.299 + comp[1] * comp[1] * 0.587
	      + comp[2] * comp[2] * 0.114);
  comp[0] = LIMIT(pert + (comp[0] - pert) * val, 0 , 255);
  comp[1] = LIMIT(pert + (comp[1] - pert) * val, 0 , 255);
  comp[2] = LIMIT(pert + (comp[2] - pert) * val, 0 , 255);
  return (recomp_color(comp));
}
Example #14
0
unsigned int	apply_contrast(unsigned int color, t_opt *opt)
{
  unsigned char	comp[3];

  decomp_color(color, comp);
  comp[0] = LIMIT((((double)comp[0] / 255 - 0.5) * opt->contrast + 0.5)
                  * 255, 0, 255);
  comp[1] = LIMIT((((double)comp[1] / 255 - 0.5) * opt->contrast + 0.5)
                  * 255, 0, 255);
  comp[2] = LIMIT((((double)comp[2] / 255 - 0.5) * opt->contrast + 0.5)
                  * 255, 0, 255);
  return (recomp_color(comp));
}
	void SimpleVolumeMeter::setValue( float peak, float hold )
	{
		LIMIT( peak, 0.f, 1.f );
		LIMIT( hold, 0.f, 1.f );
	
		if( m_bStereo || m_peak[0] != peak || m_hold[0] != hold )
		{
			m_bStereo = false;
			m_peak[0] = peak;
			m_hold[0] = hold;
			_requestRender();
		}
	}
Example #16
0
File: filter.c Project: Tastyep/rt
unsigned int	filter_grey(unsigned int color)
{
  unsigned char	comp[3];
  unsigned char	o_color[3];

  decomp_color(color, comp);
  o_color[0]= LIMIT(comp[0] * 0.33 + comp[1] * 0.33
  		    + comp[2] * 0.33, 0, 255);
  o_color[1]= LIMIT(comp[0] * 0.33 + comp[1] * 0.33
  		    + comp[2] * 0.33, 0, 255);
  o_color[2]= LIMIT(comp[0] * 0.33 + comp[1] * 0.33
  		    + comp[2] * 0.33, 0, 255);
  return (recomp_color(o_color));
}
Example #17
0
File: filter.c Project: Tastyep/rt
unsigned int	filter_sepia(unsigned int color)
{
  unsigned char	comp[3];
  unsigned char	o_color[3];

  decomp_color(color, comp);
  o_color[0]= LIMIT(comp[0] * 0.393 + comp[1] * 0.769
  		    + comp[2] * 0.189, 0, 255);
  o_color[1]= LIMIT(comp[0] * 0.349 + comp[1] * 0.686
  		    + comp[2] * 0.168, 0, 255);
  o_color[2]= LIMIT(comp[0] * 0.272 + comp[1] * 0.534
  		    + comp[2] * 0.131, 0, 255);
  return (recomp_color(o_color));
}
Example #18
0
/* Swap two items on the playlist. */
static void plist_swap (struct plist *plist, const int a, const int b)
{
	assert (plist != NULL);
	assert (LIMIT(a, plist->num));
	assert (LIMIT(b, plist->num));

	if (a != b) {
		struct plist_item t;

		t = plist->items[a];
		plist->items[a] = plist->items[b];
		plist->items[b] = t;
	}
}
Example #19
0
/* Set the time tags field for the item. */
void plist_set_item_time (struct plist *plist, const int num, const int time)
{
	int old_time;

	assert (plist != NULL);
	assert (LIMIT(num, plist->num));

	if (!plist->items[num].tags) {
		plist->items[num].tags = tags_new ();
		old_time = -1;
	}
	else if (plist->items[num].tags->time != -1)
		old_time = plist->items[num].tags->time;
	else
		old_time = -1;

	if (old_time != -1) {
		plist->total_time -= old_time;
		plist->items_with_time--;
	}

	if (time != -1) {
		plist->total_time += time;
		plist->items_with_time++;
	}

	plist->items[num].tags->time = time;
	plist->items[num].tags->filled |= TAGS_TIME;
}
Example #20
0
void Cannon_set_option(cannon_t *cannon, const char *name, const char *value)
{
    Item_t item;
    const char *origname = name;

    /* Remove possible cannon prefix from option name. */
    if (!strncasecmp(name, "cannon", 6))
	name += 6;

    item = Item_by_option_name(name);
    if (item != NO_ITEM) {
	cannon->initial_items[item] = atoi(value);
	return;
    }

    if (!strcasecmp(name, "smartness")) {
	int smartness = atoi(value);

	LIMIT(smartness, 0, CANNON_SMARTNESS_MAX);
	cannon->smartness = smartness;
	return;
    }

    if (!strcasecmp(name, "shotspeed")) {
	float shot_speed = atof(value);

	/* limit ? */
	cannon->shot_speed = shot_speed;
	return;
    }

    warn("This server doesn't support option %s for cannons.", origname);
}
Example #21
0
static void vMotorsApplyCommands(motors_command_t command)
{
  const int PWML = LIMIT(COMMAND_TO_PWM(command.motor.left), MIN_PWM, MAX_PWM);
  const int PWMR = LIMIT(COMMAND_TO_PWM(command.motor.right), MIN_PWM, MAX_PWM);

  // Here we disable interrupts to ensure that the same command will
  // be applied to the two motors at the same time. Moreover for a
  // single motor we want the PWMs to be fully synchronized.
  portDISABLE_INTERRUPTS();
  TIM_SetCompare1(TIM5, PWML);
  TIM_SetCompare2(TIM5, PWML);

  TIM_SetCompare3(TIM5, PWMR);
  TIM_SetCompare4(TIM5, PWMR);
  portENABLE_INTERRUPTS();
}
Example #22
0
File: x.c Project: fedeDev/dotfiles
int
evrow(XEvent *e)
{
	int y = e->xbutton.y - borderpx;
	LIMIT(y, 0, win.th - 1);
	return y / win.ch;
}
Example #23
0
void Text::Draw()
{
	if (textDyn.size() == 0) return;

	if (!this->IsVisible()) return;

	GXColor c = color;
	c.a = this->GetAlpha();

	int newSize = (int) (size * GetScale());

	if (newSize != currentSize)
	{
		currentSize = LIMIT(newSize, 1, 100);

		if (wText) textWidth = (font ? font : fontSystem)->getWidth(wText->data(), currentSize);
	}

	u16 lineheight = newSize + 6;

	for (u32 i = 0; i < textDyn.size(); i++)
	{
		if (!filling) (font ? font : fontSystem)->drawText(this->GetLeft(), this->GetTop() + i * lineheight, 0,
				textDyn[i], currentSize, c, style, 0, maxWidth);
	}
}
Example #24
0
void plist_set_tags (struct plist *plist, const int num,
		const struct file_tags *tags)
{
	int old_time;

	assert (plist != NULL);
	assert (LIMIT(num, plist->num));
	assert (tags != NULL);

	if (plist->items[num].tags && plist->items[num].tags->time != -1)
		old_time = plist->items[num].tags->time;
	else
		old_time = -1;

	if (plist->items[num].tags)
		tags_free (plist->items[num].tags);
	plist->items[num].tags = tags_dup (tags);

	if (old_time != -1) {
		plist->total_time -= old_time;
		plist->items_with_time--;
	}

	if (tags->time != -1) {
		plist->total_time += tags->time;
		plist->items_with_time++;
	}
}
Example #25
0
/* Given an index, return the string at that position in a list. */
char *lists_strs_at (const lists_t_strs *list, int index)
{
	assert (list);
	assert (LIMIT(index, list->size));

	return list->strs[index];
}
Example #26
0
rgb color(double iter)
{
    rgb res;
    double r, g, b, c;

    c = (iter - startiter) / (enditer - startiter);
    r = pow(c, er);
    g = pow(c, eg);
    b = pow(c, eb);

    res.r = LIMIT(r, 0.0, 1.0) * 255;
    res.g = LIMIT(g, 0.0, 1.0) * 255;
    res.b = LIMIT(b, 0.0, 1.0) * 255;

    return res;
}
Example #27
0
File: x.c Project: fedeDev/dotfiles
int
evcol(XEvent *e)
{
	int x = e->xbutton.x - borderpx;
	LIMIT(x, 0, win.tw - 1);
	return x / win.cw;
}
	void SimpleVolumeMeter::setValue( float leftPeak, float leftHold, float rightPeak, float rightHold )
	{
		LIMIT( leftPeak, 0.f, 1.f );
		LIMIT( leftHold, 0.f, 1.f );
		LIMIT( rightPeak, 0.f, 1.f );
		LIMIT( rightHold, 0.f, 1.f );
		
		if( !m_bStereo || m_peak[0] != leftPeak || m_hold[0] != leftHold || m_peak[1] != rightPeak || m_hold[1] != rightHold )
		{
			m_bStereo = true;
			m_peak[0] = leftPeak;
			m_peak[1] = rightPeak;
			m_hold[0] = leftHold;
			m_hold[1] = rightHold;
			_requestRender();
		}
	}
Example #29
0
/* Set tags title of an item. */
void plist_set_title_tags (struct plist *plist, const int num,
		const char *title)
{
	assert (LIMIT(num, plist->num));

	if (plist->items[num].title_tags)
		free (plist->items[num].title_tags);
	plist->items[num].title_tags = xstrdup (title);
}
Example #30
0
double falloff(int x, int y)
{
	double fx = (x - 512.0) / 512.0;
	double fy = (y - 512.0) / 512.0;
	double f = ((islandSize - islandEdge) - sqrt(fx * fx + fy * fy)) / islandEdge;
	f = pow(f, 3.0) + 1.0;
	f = LIMIT(f, 0.0, 1.0);
	return f;
}