void menuModelLimits(uint8_t event)
{
int sub = menuVerticalPosition;
if (sub < NUM_CHNOUT) {
#if defined(PPM_CENTER_ADJUSTABLE) || defined(PPM_UNIT_US)
lcd_outdezAtt(13*FW, 0, PPM_CH_CENTER(sub)+channelOutputs[sub]/2, 0);
lcd_puts(13*FW, 0, STR_US);
#else
lcd_outdezAtt(13*FW, 0, calcRESXto1000(channelOutputs[sub]), PREC1);
#endif
}
MENU(STR_MENULIMITS, menuTabModel, e_Limits, NUM_CHNOUT+1, { NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, 0 });
if (sub<NUM_CHNOUT && menuHorizontalPosition>=0) {
displayColumnHeader(STR_LIMITS_HEADERS, menuHorizontalPosition);
}
if (warningResult) {
warningResult = 0;
LimitData *ld = limitAddress(sub);
ld->revert = !ld->revert;
eeDirty(EE_MODEL);
}
for (int i=0; i<NUM_BODY_LINES; i++) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i+menuVerticalOffset;
if (k==NUM_CHNOUT) {
// last line available - add the "copy trim menu" line
uint8_t attr = (sub==NUM_CHNOUT) ? INVERS : 0;
lcd_putsAtt(CENTER_OFS, y, STR_TRIMS2OFFSETS, NO_HIGHLIGHT() ? 0 : attr);
if (attr) {
s_editMode = 0;
if (event==EVT_KEY_LONG(KEY_ENTER)) {
START_NO_HIGHLIGHT();
killEvents(event);
moveTrimsToOffsets(); // if highlighted and menu pressed - move trims to offsets
}
}
return;
}
LimitData *ld = limitAddress(k);
int16_t v = (ld->revert) ? -LIMIT_OFS(ld) : LIMIT_OFS(ld);
char swVal = '-'; // '-', '<', '>'
if ((channelOutputs[k] - v) > 50) swVal = (ld->revert ? 127 : 126); // Switch to raw inputs? - remove trim!
if ((channelOutputs[k] - v) < -50) swVal = (ld->revert ? 126 : 127);
lcd_putc(LIMITS_DIRECTION_POS, y, swVal);
int limit = (g_model.extendedLimits ? LIMIT_EXT_MAX : 1000);
putsChn(0, y, k+1, (sub==k && menuHorizontalPosition < 0) ? INVERS : 0);
if (sub==k && menuHorizontalPosition < 0 && event==EVT_KEY_LONG(KEY_ENTER) && !READ_ONLY()) {
killEvents(event);
POPUP_MENU_ADD_ITEM(STR_RESET);
POPUP_MENU_ADD_ITEM(STR_COPY_TRIMS_TO_OFS);
POPUP_MENU_ADD_ITEM(STR_COPY_STICKS_TO_OFS);
popupMenuHandler = onLimitsMenu;
}
for (int j=0; j<ITEM_LIMITS_COUNT; j++) {
LcdFlags attr = ((sub==k && menuHorizontalPosition==j) ? ((s_editMode>0) ? BLINK|INVERS : INVERS) : 0);
uint8_t active = (attr && s_editMode>0) ;
if (active) STICK_SCROLL_DISABLE();
switch(j)
{
case ITEM_LIMITS_CH_NAME:
editName(LIMITS_NAME_POS, y, ld->name, sizeof(ld->name), event, attr);
break;
case ITEM_LIMITS_OFFSET:
if (GV_IS_GV_VALUE(ld->offset, -1000, 1000) || (attr && event == EVT_KEY_LONG(KEY_ENTER))) {
ld->offset = GVAR_MENU_ITEM(LIMITS_OFFSET_POS, y, ld->offset, -1000, 1000, attr|PREC1, 0, event);
break;
}
#if defined(PPM_UNIT_US)
lcd_outdezAtt(LIMITS_OFFSET_POS, y, ((int32_t)ld->offset*128) / 25, attr|PREC1);
#else
lcd_outdezAtt(LIMITS_OFFSET_POS, y, ld->offset, attr|PREC1);
#endif
if (active) {
ld->offset = checkIncDec(event, ld->offset, -1000, 1000, EE_MODEL, NULL, stops1000);
}
else if (attr && event==EVT_KEY_LONG(KEY_MENU)) {
copySticksToOffset(k);
s_editMode = 0;
}
break;
case ITEM_LIMITS_MIN:
if (GV_IS_GV_VALUE(ld->min, -GV_RANGELARGE, GV_RANGELARGE) || (attr && event == EVT_KEY_LONG(KEY_ENTER))) {
ld->min = GVAR_MENU_ITEM(LIMITS_MIN_POS, y, ld->min, -LIMIT_EXT_MAX, LIMIT_EXT_MAX, MIN_MAX_ATTR, 0, event);
break;
}
lcd_outdezAtt(LIMITS_MIN_POS, y, MIN_MAX_DISPLAY(ld->min-LIMITS_MIN_MAX_OFFSET), MIN_MAX_ATTR);
if (active) ld->min = LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->min-LIMITS_MIN_MAX_OFFSET, -limit, 0, EE_MODEL, NULL, stops1000);
break;
case ITEM_LIMITS_MAX:
if (GV_IS_GV_VALUE(ld->max, -GV_RANGELARGE, GV_RANGELARGE) || (attr && event == EVT_KEY_LONG(KEY_ENTER))) {
ld->max = GVAR_MENU_ITEM(LIMITS_MAX_POS, y, ld->max, -LIMIT_EXT_MAX, LIMIT_EXT_MAX, MIN_MAX_ATTR, 0, event);
break;
}
lcd_outdezAtt(LIMITS_MAX_POS, y, MIN_MAX_DISPLAY(ld->max+LIMITS_MIN_MAX_OFFSET), MIN_MAX_ATTR);
if (active) ld->max = -LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->max+LIMITS_MIN_MAX_OFFSET, 0, +limit, EE_MODEL, NULL, stops1000);
break;
case ITEM_LIMITS_DIRECTION:
{
uint8_t revert = ld->revert;
#if defined(PPM_CENTER_ADJUSTABLE)
lcd_putcAtt(LIMITS_REVERT_POS, y, revert ? 127 : 126, attr);
#else
lcd_putsiAtt(LIMITS_REVERT_POS, y, STR_MMMINV, revert, attr);
#endif
if (active) {
uint8_t revert_new = checkIncDecModel(event, revert, 0, 1);
if (checkIncDec_Ret && isThrottleOutput(k)) {
POPUP_CONFIRMATION(STR_INVERT_THR);
}
else {
ld->revert = revert_new;
}
}
break;
}
#if defined(CURVES)
case ITEM_LIMITS_CURVE:
putsCurve(LIMITS_CURVE_POS, y, ld->curve, attr);
if (attr && event==EVT_KEY_LONG(KEY_ENTER) && ld->curve>0) {
s_curveChan = (ld->curve<0 ? -ld->curve-1 : ld->curve-1);
pushMenu(menuModelCurveOne);
}
if (active) {
CHECK_INCDEC_MODELVAR(event, ld->curve, -MAX_CURVES, +MAX_CURVES);
}
break;
#endif
#if defined(PPM_CENTER_ADJUSTABLE)
case ITEM_LIMITS_PPM_CENTER:
lcd_outdezAtt(LIMITS_PPM_CENTER_POS, y, PPM_CENTER+ld->ppmCenter, attr);
if (active) {
CHECK_INCDEC_MODELVAR(event, ld->ppmCenter, -PPM_CENTER_MAX, +PPM_CENTER_MAX);
}
break;
#endif
#if defined(PPM_LIMITS_SYMETRICAL)
case ITEM_LIMITS_SYMETRICAL:
lcd_putcAtt(LCD_W-FW-MENUS_SCROLLBAR_WIDTH, y, ld->symetrical ? '=' : '\306', attr);
if (active) {
CHECK_INCDEC_MODELVAR_ZERO(event, ld->symetrical, 1);
}
break;
#endif
}
}
}
}
void menuModelLimits(uint8_t event)
{
uint8_t sub = m_posVert - 1;
if (sub < NUM_CHNOUT) {
#if defined(PPM_CENTER_ADJUSTABLE) || defined(PPM_UNIT_US)
lcd_outdezAtt(13*FW, 0, PPM_CH_CENTER(sub)+channelOutputs[sub]/2, 0);
lcd_puts(13*FW, 0, STR_US);
#else
lcd_outdezAtt(13*FW, 0, calcRESXto1000(channelOutputs[sub]), PREC1);
#endif
}
#if defined(CPUARM)
MENU(STR_MENULIMITS, menuTabModel, e_Limits, 1+NUM_CHNOUT+1, {0, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, NAVIGATION_LINE_BY_LINE|ITEM_LIMITS_MAXROW, 0});
#else
MENU(STR_MENULIMITS, menuTabModel, e_Limits, 1+NUM_CHNOUT+1, {0, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, ITEM_LIMITS_MAXROW, 0});
#endif
if (s_warning_result) {
s_warning_result = 0;
LimitData *ld = limitAddress(sub);
ld->revert = !ld->revert;
eeDirty(EE_MODEL);
}
for (uint8_t i=0; i<LCD_LINES-1; i++) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i+s_pgOfs;
if (k==NUM_CHNOUT) {
// last line available - add the "copy trim menu" line
uint8_t attr = (sub==NUM_CHNOUT) ? INVERS : 0;
lcd_putsAtt(CENTER_OFS, y, STR_TRIMS2OFFSETS, s_noHi ? 0 : attr);
if (attr) {
s_editMode = 0;
if (event==EVT_KEY_LONG(KEY_ENTER)) {
s_noHi = NO_HI_LEN;
killEvents(event);
moveTrimsToOffsets(); // if highlighted and menu pressed - move trims to offsets
}
}
return;
}
LimitData *ld = limitAddress(k);
#if !defined(PPM_CENTER_ADJUSTABLE)
int16_t v = (ld->revert) ? -LIMIT_OFS(ld) : LIMIT_OFS(ld);
char swVal = '-'; // '-', '<', '>'
if ((channelOutputs[k] - v) > 50) swVal = (ld->revert ? 127 : 126); // Switch to raw inputs? - remove trim!
if ((channelOutputs[k] - v) < -50) swVal = (ld->revert ? 126 : 127);
putsChn(0, y, k+1, 0);
lcd_putc(LIMITS_DIRECTION_POS, y, swVal);
#endif
int8_t limit = (g_model.extendedLimits ? LIMIT_EXT_MAX : 100);
putsChn(0, y, k+1, 0);
for (uint8_t j=0; j<ITEM_LIMITS_COUNT; j++) {
uint8_t attr = ((sub==k && m_posHorz==j) ? ((s_editMode>0) ? BLINK|INVERS : INVERS) : 0);
uint8_t active = (attr && (s_editMode>0 || p1valdiff)) ;
if (active) STICK_SCROLL_DISABLE();
switch(j)
{
case ITEM_LIMITS_OFFSET:
#if defined(PPM_UNIT_US)
lcd_outdezAtt(LIMITS_OFFSET_POS, y, ((int32_t)ld->offset*128) / 25, attr|PREC1);
#else
lcd_outdezAtt(LIMITS_OFFSET_POS, y, ld->offset, attr|PREC1);
#endif
if (active) {
#if defined(CPUARM)
ld->offset = checkIncDec(event, ld->offset, -1000, 1000, EE_MODEL, NULL, stops1000);
#else
ld->offset = checkIncDec(event, ld->offset, -1000, 1000, EE_MODEL|NO_INCDEC_MARKS);
#endif
}
else if (attr && event==EVT_KEY_LONG(KEY_MENU)) {
copySticksToOffset(k);
s_editMode = 0;
}
break;
case ITEM_LIMITS_MIN:
lcd_outdezAtt(LIMITS_MIN_POS, y, MIN_MAX_DISPLAY(ld->min-LIMITS_MIN_MAX_OFFSET), MIN_MAX_ATTR);
#if defined(CPUARM)
if (active) ld->min = LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->min-LIMITS_MIN_MAX_OFFSET, -limit, 0, EE_MODEL, NULL, stops1000);
#else
if (active) ld->min = LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->min-LIMITS_MIN_MAX_OFFSET, -limit, 0, EE_MODEL);
#endif
break;
case ITEM_LIMITS_MAX:
lcd_outdezAtt(LIMITS_MAX_POS, y, MIN_MAX_DISPLAY(ld->max+LIMITS_MIN_MAX_OFFSET), MIN_MAX_ATTR);
#if defined(CPUARM)
if (active) ld->max = -LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->max+LIMITS_MIN_MAX_OFFSET, 0, +limit, EE_MODEL, NULL, stops1000);
#else
if (active) ld->max = -LIMITS_MIN_MAX_OFFSET + checkIncDec(event, ld->max+LIMITS_MIN_MAX_OFFSET, 0, +limit, EE_MODEL);
#endif
break;
case ITEM_LIMITS_DIRECTION:
{
uint8_t revert = ld->revert;
#if defined(PPM_CENTER_ADJUSTABLE)
lcd_putcAtt(LIMITS_REVERT_POS, y, revert ? 127 : 126, attr);
#else
lcd_putsiAtt(LIMITS_REVERT_POS, y, STR_MMMINV, revert, attr);
#endif
if (active) {
uint8_t revert_new = checkIncDecModel(event, revert, 0, 1);
if (checkIncDec_Ret && isThrottleOutput(k)) {
POPUP_CONFIRMATION(STR_INVERT_THR);
}
else {
ld->revert = revert_new;
}
}
break;
}
#if defined(PPM_CENTER_ADJUSTABLE)
case ITEM_LIMITS_PPM_CENTER:
lcd_outdezAtt(LIMITS_PPM_CENTER_POS, y, PPM_CENTER+ld->ppmCenter, attr);
if (active) {
CHECK_INCDEC_MODELVAR(event, ld->ppmCenter, -PPM_CENTER_MAX, +PPM_CENTER_MAX);
}
break;
#endif
#if defined(PPM_LIMITS_SYMETRICAL)
case ITEM_LIMITS_SYMETRICAL:
#if defined(CPUARM)
lcd_putcAtt(LCD_W-FW-MENUS_SCROLLBAR_WIDTH, y, ld->symetrical ? '=' : '\306', attr);
#else
lcd_putcAtt(LCD_W-FW-MENUS_SCROLLBAR_WIDTH, y, ld->symetrical ? '=' : '^', attr);
#endif
if (active) {
CHECK_INCDEC_MODELVAR_ZERO(event, ld->symetrical, 1);
}
break;
#endif
}
}
}
}