static void
tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
{
int phy_id = efx->mii.phy_id;
u32 adv = 0, lpa = 0;
int reg;
if (efx->phy_type != PHY_TYPE_SFX7101) {
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
C22EXT_MSTSLV_CTRL);
if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN))
adv |= ADVERTISED_1000baseT_Full;
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
C22EXT_MSTSLV_STATUS);
if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN))
lpa |= ADVERTISED_1000baseT_Half;
if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN))
lpa |= ADVERTISED_1000baseT_Full;
}
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_AN_10GBT_CTRL);
if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN))
adv |= ADVERTISED_10000baseT_Full;
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_AN_10GBT_STATUS);
if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN))
lpa |= ADVERTISED_10000baseT_Full;
mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa);
if (efx->phy_type != PHY_TYPE_SFX7101)
ecmd->supported |= (SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full);
/* In loopback, the PHY automatically brings up the correct interface,
* but doesn't advertise the correct speed. So override it */
if (efx->loopback_mode == LOOPBACK_GPHY)
ecmd->speed = SPEED_1000;
else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)
ecmd->speed = SPEED_10000;
}
/* Try to bring up the Falcon side of the Falcon-Phy XAUI link */
static bool falcon_xmac_link_ok_retry(struct efx_nic *efx, int tries)
{
bool mac_up = falcon_xmac_link_ok(efx);
if (LOOPBACK_MASK(efx) & LOOPBACKS_EXTERNAL(efx) & LOOPBACKS_WS ||
efx_phy_mode_disabled(efx->phy_mode))
/* XAUI link is expected to be down */
return mac_up;
falcon_stop_nic_stats(efx);
while (!mac_up && tries) {
EFX_LOG(efx, "bashing xaui\n");
falcon_reset_xaui(efx);
udelay(200);
mac_up = falcon_xmac_link_ok(efx);
--tries;
}
falcon_start_nic_stats(efx);
return mac_up;
}
